As per subject, mine is sitting there displaying the Cyanogen loading... and never move on, was that something to do with the sd card I used?
I have a 4g generic brand with the latest nightly build.
All helps are a.ppriatede
TIA.
It depends on a few factors
a. Very first time when it compiling the entire new Dalvik cache, this takes quite a while
b. I personally feel booting from eMMC is faster than doing so from uSD card.
c. Image dependance. Normally it took 1+ minutes to get to the lock-in screen but the nb153 seems to be twice faster.
Hi vifinh,
Thanks for the prompt response.
How long is the "quite a while", maybe I was not patient enough?
I have never had a new install of a rom take more than 1.5 minutes to boot (using cm7) as was mentioned, the first boot takes a bit longer (30-45 seconds longer) but if you are seeeing longer than 2+ minutes, there is a problem with the install.
Sent from my NookColor using Tapatalk
CM7 nightly 150 introduces fast boot. Mine is boot up within 1 minute which is faster it was before.
Moshe5368 said:
I have never had a new install of a rom take more than 1.5 minutes to boot (using cm7) as was mentioned, the first boot takes a bit longer (30-45 seconds longer) but if you are seeeing longer than 2+ minutes, there is a problem with the install.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
..in which case you should use adb logcat to figure out what's wrong. Usually a factory wipe will fix whatever issues you're having tho.
Thanks guys.
Mine was sitting there for over a half-hour with no movement, so there is something wrong here.
Sandisk class 4 (8 and 16g) has become the accepted standard here for SD based CM7.
If you read the verygreen install instructions, it contains a link to a thread that stresses how random block write speed is the most important factor on having a stable and fast sd CM7 system for the NC.
Replacing that generic SD is the first thing I would suggest doing.
andtron said:
Thanks guys.
Mine was sitting there for over a half-hour with no movement, so there is something wrong here.
Click to expand...
Click to collapse
1/2 hour was dead wrong.
5+ mins was something wrong.
Force power off then turn it back on again and see if it's better, if not, redo the clean installation.
Thanks to all the responses, I really appreicated them.
Before I gave up on my generic sd card , here was what I did:
(1) Used win32diskimager to write 4gb_clockwork-3.0.2.8.img to the card, removed and reinsert the card back to the PC,
(2) Unzipped the CM7 nightly build (I used the cm_encore_full-139 uild), then wrote its contents (META and system folders, plus all the remaining files) to the root of the card.
Plugged the card into my NC, and thiat was what I got.
Did I miss anything in between?
TIA.
andtron said:
Thanks to all the responses, I really appreicated them.
Before I gave up on my generic sd card , here was what I did:
(1) Used win32diskimager to write 4gb_clockwork-3.0.2.8.img to the card, removed and reinsert the card back to the PC,
(2) Unzipped the CM7 nightly build (I used the cm_encore_full-139 uild), then wrote its contents (META and system folders, plus all the remaining files) to the root of the card.
Plugged the card into my NC, and thiat was what I got.
Did I miss anything in between?
TIA.
Click to expand...
Click to collapse
Based on what you described, yes, you have messed it up real bad but don't worry, here's the fix
(2) DO NOT unzip the CM7 nightly image, leave it intact, leave it as how it looks when you downloaded. Just out of my curiosity, why do you unzip and modify what inside? whose instructions you follow?
(1) "removed and reinsert the card back to the PC". You remove the uSD from what? Note: you use the PC (windows) to create the bootable uSD and then copy the CM7 nightly build over the root folder of the card.
votinh said:
Based on what you described, yes, you have messed it up real bad but don't worry, here's the fix
(2) DO NOT unzip the CM7 nightly image, leave it intact, leave it as how it looks when you downloaded. Just out of my curiosity, why do you unzip and modify what inside? whose instructions you follow?
(1) "removed and reinsert the card back to the PC". You remove the uSD from what? Note: you use the PC (windows) to create the bootable uSD and then copy the CM7 nightly build over the root folder of the card.
Click to expand...
Click to collapse
Thanks!
(2) I thought that was the natural thing to do, lol.
(1) Immediately after the image file copy, the SD was not accessible to me, every time I tried to copy file (e.g. the zip file), the message that say something likes "Do you want to format the device?" would pop up. So I need to take the card out of the usb port and reinserted it, then the message disappear.
I would try your remedy and I am sure it would work this time.
Again, thanks!
Mine is now up and running, thanks votinh.
Glad to hear that!
Enjoy CM7, m8
Related
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
This is the right place to ask general questions.
1. Most certainly not.
2. Yes, using a bootable CWR SD is the way to go.
3. Totally different. The Rootpack is the name given to a package that helps you root your Nook. CWR image is a recovery image. That means you can boot to this recovery utility and apply changes to you NC (like repairing stuff, making backups, etc.).
4. An image will adapt to the drive. If you have a 4GB SD and burn (dd) a 1GB image to it, your SD will suddenly present itself as a 1GB SD. If you format it with the right tool, your SD will be 4GB again. So don't panick, if it says 1GB after burning, it's jut "adapted to the image". You haven't lost any disk space.
5. 1GB would be enough, but you can go up to 4GB image with a 4GB.. It could sometimes be a problem to apply an image which is the exact same size as the drive. I would use th 1GB, which is plenty for what you are going to do.
6. That's up to you. Both should work.
7. Yes.
8. Just read threads exhaustively before attempting anything..
So what you need to do is read threads about this CWR Bootable img to learn how to burn it to your SD.
Then, find the appropriate .zip files to flash (apply) (1.1 recovery and 1.0.1 are available in dev section.
Copy them to root of SD.
Boot with the SD Card and apply zip files from SD.
If your NC should still have problems booting, you can also apply a boot repair zip file, that you will find on my Nook Color restore to stock tread in dev..
Sam
His Rootpack wont work on 1.1.0 You should have seen that in his instructions. It will only block 1.1.0 and fake it. You need to see this thread to fix your nook. It is 100% NOT bricked, just messed up atm. You can fix it tho. Read here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for thr quick reponse Sam. I'm at work now, but will be able to use your suggestions later this afternoon\tonight. So, if I get a 1gb CWR image on my 4gb sd card, plus the 1.1.0 zip file and put it in the root of the sd card, the Nook should boot up even though I can't turn it on now? How long typacally will it take to boot up? What should I expect to see?
I will post results after I try the procedure. Thanks again!!
Thanks Thiboi69. I have printed out the instructions from the link you sent and will follow them to the T. I'll post results later.
It will work. I have never heard of a 100%bricked NookColor to date. And I have read 1,000's of posts here over the past 4 months. IT is just your boot partition that is messed up and B&N made it check the sdcard first for a Boot partition, then fall back to eMMC. Thank you B&N !!!
I downloaded all the files, wrote them to my sd card, and put it in the Nook. When I connected the Nook to my pc, I got a messaage the the battery was too low to turn on. So, I took the sd card out, and put the Nook on charge. After a while, it turned on, booted up and when I checked my OS, I found that I had
version 1.1.0. Apparently, my attempt to root with autonooter 3, never got installed, partially or completely. And, my battery probably got to low to turn the nook on. So, I didn't need to use CWR after all. I apologize to all who have tried to help me. But, all replies were good and contained useful info.
Now, my question is: Should I try to use Autonooter 3 again, or is there an easier
(more foolproof) way to root v1.1.0?
I just got a nook last night with the sole intention of hacking it - and did so in a matter of minutes. Autonooter couldnt be easier! When you get to the part of putting the SD card in the nook and connecting it to USB to make it boot, just plug it in and go get a cup of coffee. Don't unplug or touch anything until it boots up by itself. At 1st I thought it wasn't doing anything as I didn't see a clockwork mod screen come up or anything, but just be patient and it'll tell you when it's done. Just make sure it's pretty well charged when you do it - mine was about 80% or so.
Honestly after less than a day of the rooted stock 2.1 Eclair OS, I'm ready to drop a fully customized Froyo or Gingerbread image on this thing. Autonooter it 1st and run it for a few days 1st and see what you think. I'm still learning the ins and outs of tinkering with this thing, but so far it seems much easier than the Epic and Moment I've been beating on. Seems pretty well unbrickable too thanks to the boot to SD 1st option B&N baked into this puppy.
jostarr said:
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
Click to expand...
Click to collapse
Joe, I would recommend downloading the 1gb rootpack image and a restore to stock file. Make your bootable clockwork recovery image, place the resotre to stock file on the sdcard, turn your nook off, insert the sdcard, power on and flash the file. All this info and more can be found in my thread here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for your suggestion Riley, please take a look at my post # 7 above. Seemd my NC
had a low battery. When I charged it, all was ok. It booted up and I was back in 1.1.0.
But, I just now tried autonooter 3.0.0 again. When I pluged thr NC inyo my PC, I got some sort or warning message. I hit cancel and waited a few minutes. The message came up again. It said the device was not recognized. I unplugged, removed the card, and my fully charged NV won't turn on. And, windows explorer can not read the sd card. This is basically what happened yesterday to cause my panic. The sd card had all the files befor I inserted it into the NC. Now, it's unreadable and I can't turn on or boot the NC again.
Is it autonooter 3.0.0, or the card, or the Nook, or me?????
One correction to post # 10. I can read the sd card in windows explorer. But my NC won't turn on.
With sd card out of the Nook, I get a "Welcome to the Found New Hardware Wizzard"
What does this tell anyone about the condition of my Nook?
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Sent from my ADR6300 using XDA App
You can put the rom image to a separate SD card. Just swap it after you boot up from cwr. I did it before for flashing froyo to emmc.
Sent from my PC36100 using XDA App
72chevy2k2 said:
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Click to expand...
Click to collapse
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Just a noobish advise!
After configure everything and become accustomed to some of the NC behaviors this should not matter, but I remember at my first attempts at rooting the NC, using a Win7 PC was much easier than using Win XP or iOS devices. Might fix your 'not recognized' problems, sd card recognition and formatting problems etc.
It has CWM on it. I can get it to recovery but it will not recognize the SD or not mount it and I go to mount it in the menu and it says something like can not mount SD card so I have been trying to do the CWM SD burn but I keep getting the above errors I am on a vista computer so I will try it on my windows 7 one and see how that goes. And the different SD card one I will try that as well after work thank you for the help.
Sent from my ADR6300 using XDA App
RickOSidhe said:
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Click to expand...
Click to collapse
Yes I did try that one I put the nookie froyo on the SD and put it I'm my turned off NC and plugged it in to my computer and it sat at the N screen forever and after a while I took it off and it was still in the same state could the CWM be the problem?
Sent from my ADR6300 using XDA App
I'm not sure what posts 13 thru 18 have to do with my problem???
Just didn't feel like starting a new thread for the couple of questions I had along the same line as yours.
Sent from my ADR6300 using XDA App
Hopefully there is hope for me. I've recently discovered the wonderful world of rooting and rooted my nook successfully. After root I loaded ROM Manager and started the process of backing up with the clockworkmod. (I'm very new to rooting so I'm not sure exactly where I went wrong). Somewhere in the process I got stuck in a menu loop in clockwork. I trolled the forums and attempted several things including CRW removal and Nook complete restore. I'm not sure I attempted them correctly as I was still in the CRW menu screen. Now, my nook will not even turn on plugged in or otherwise. Any help (and please make it detailed step by step) would be greatly appreciated. I'll keep my eye close to this thread throughout the evening. Thank you in advance for helping out a new rooter. ChipD
can't really help other then say that your nook is fine... just keep looking at all the 'bricking' threads in this forum. there are plenty to choose from.
Try this.
Somewhere in the process I got stuck in a menu loop in clockwork. I trolled the forums and attempted several things including CRW removal and Nook complete restore. I'm not sure I attempted them correctly as I was still in the CRW menu screen. Now, my nook will not even turn on plugged in or otherwise. Any help (and please make it detailed step by step) would be greatly appreciated. I'll keep my eye close to this thread throughout the evening. Thank you in advance for helping out a new rooter. ChipD[/QUOTE]
I had the same issue and this worked for me. next time you flash CWR be sure you do a normal reboot B4 doing a reboot to recovery. just flash this...
CWR-removal-rootsafe I cant attach the URL but google it and it will come up in the second choice. let me know...
Thanks jarussillo. I found the file you refereed to and have it on my computer. Please give me a step by step on how to flash it without being able to see anything on my screen. I don't have any backup, all I have is a formatted sd card. Do I put the unzipped file on the card, or do I unzip the files and drop those on the card? Thanks for being willing to help.
pastorchip said:
Thanks jarussillo. I found the file you refereed to and have it on my computer. Please give me a step by step on how to flash it without being able to see anything on my screen. I don't have any backup, all I have is a formatted sd card. Do I put the unzipped file on the card, or do I unzip the files and drop those on the card? Thanks for being willing to help.
Click to expand...
Click to collapse
You will need to burn a CWR SD card, then drop the zip file into the root of the sd card, then Boot off the SD card, (You might have to hold the power button down for 20secs before you will see it boot) then Flash the Zip file from CWR.
Also read this thread. FULLY read it.
http://forum.xda-developers.com/showthread.php?t=949699
just flash the the CWR to your sd card you can search it on the site.
AWESOME! That article looks like exactly what I needed. I knew it was out there somewhere, I just couldn't find it. THANKS!!!! I'll update (hopefully with success) when I'm done.
Well, no success tonight. I downloaded all the stuff mentioned in the previous article, but the rootpack & the clockwork don't download in a zipped folder (like I even observed in a youtube video). They download as a GZ file. I'm not sure what to do with that because I can't decompress it and send it into the disk imager. What am I missing here? I'll check back in the am, thanks.
pastorchip said:
Well, no success tonight. I downloaded all the stuff mentioned in the previous article, but the rootpack & the clockwork don't download in a zipped folder (like I even observed in a youtube video). They download as a GZ file. I'm not sure what to do with that because I can't decompress it and send it into the disk imager. What am I missing here? I'll check back in the am, thanks.
Click to expand...
Click to collapse
http://www.7-zip.org/
this can decompress pretty much anything, Plus its free and open source
If I remember right that gz file needs to be unpacked so you can get the img file and then write the img with windisk32 to the SD that has cwr on it. But I may be mistaken pretty new to this stuff to
Sent from my DROIDX using XDA App
What operating system are you using?
Be aware that in the rooting/CWM/ROM world you basically have ROMs and installable zips, you need to be aware of how to handle each.
If windows, you should be using winRAR to unzip image files for flashing to microSD. If the compressed file contains files and folders its most likely an installabe zip thats to be copied to a microSD AS IS and installed using clockwork recovery. If the compressed fiile has an .img file in it, its a ROM and must be burned to a microSD (effectively erasing said microSD) and then inserted into the nook while its off.
For ROMs as described above, uncompress the .img files to your hdd and then use win32disk imager to burn the .img to the microSD using a usb adapter.
Sent from my Nook Color using Tapatalk
pretty much burn CWR onto a uSD card then put a rom onto the uSD card in the .zip format.
put in the uSD card, plug into PC, hold the on button for a while then you'll hear the PC do the "usb device connected" noise, keep holding that power button until it powers on
most problems can be solved by writing any recent CWR onto a uSD card, the great news is that the nook color's boot priority is straight to the uSD which means any problem on the emmc isn't too big as it'll boot to uSD first
good morning all. I'm gonna get this figured out today, I feel it! Muzzy, I'm running Windows 7 64 bit.
Ok, here's where I'm at. I see the endroad (meaning I understand the steps needed for recovery) and have all the tools I need except for a proper CWR file, which seems to be the most important part. The file I downloaded from http://legacyschool.us.to/nookdev/clockwork/0.7/ (took me about half an hour) does not give me a folder with extractable files as seen in http://www.youtube.com/watch?v=1B31y_lyHIA (jump to 45 secs.). Instead it gives me a single gz file that is not compressed. It's not runnable through win 32 diskimager. Putting that file on an sd card and trying to boot my nook with it has no effect.
Edit: Ok, WinZip to the rescue. I was able to extract the file with WinZip and have it cooking in the disk imager now! WOOHOO!
Edit 2: All seems to be installing correctly, fingers crossed...
Getting closer, I had to use the repartition. Now it turns back on and I get the big "n". It's ocupying my entire day, but I'm actually enjoying this. I've learned a lot! Flahing Nookcolor 1.1 now. Hopefully that will finish me off.
She's BACK! Thanks for all the help. I never would have found the right info without people taking the time to point in the right direction. You guys are great!
I keep seeing SD card rooting questions. I'm providing a link to some guides that describe in gory detail how to get CM7 up and running on an SD card (for both MAC OSX and PC). These guides are built off of verygreen's size-agnostic SD card thread and he deserves any and all credit. All that I (DrAstro) and DrWho have done is expound on the easy-to-follow steps that he provides from the perspective of trying to teach someone who is only mildly computer literate.
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
If this helps, go to verygreen's SIZE AGNOSTIC card thread and give him thanks.
I've just copied and pasted directly from Clubnook in case people don't want to link over there. If this is useful for you, comment and I'll keep it updated. If not, just let it fall into the ether...
CM7 - SD Card - Mac Version
INSTALLING CM7 (CyanogenMod 7/Android 2.3) ONTO A MICROSD CARD FOR USE WITH NOOK COLOR
Thanks to DrAstro for the following instructions:
I used the instructions from verygreen (who deserves any and all credit):
http://forum.xda-developers.com/show....php?t=1000957
I did nothing other than follow exactly what he said to do and was up and running with full android market access in about 10 minutes (with a 5 minute nap in the middle!). It was literally that easy. I’ve just expanded, in gory detail, on the basic.
Basically, what you are doing here is taking a microSD card, making it so that the nook color can boot from it, putting a new OS on that card (CM7) and then adding the android market. At the end, you will be able to run a more tablet-like experience from your microSD card without doing anything to the internal software that BN put on there. Here are steps, with heavy borrowing from verygreen’s guide. Hopefully you will read and understand what you are doing, so that you can pick and choose which OS zip you want to use.
NOTE: These are mac specific instructions, as that’s what I used!
1) Downloaded the following files and put them on your desktop:
generic-sdcard-v1.2.1.img.gz
(http://nook.handhelds.ru/sdimage/gen...-v1.2.1.img.gz) - This file makes your SD card bootable. This is probably the “hardest” part of the process as you have to “burn” this image to the card, not just “drag and drop”
update-cm-7.1.0-RCO-encore-2.6.32-beta3.1.zip
(http://coachz.inetpro.org/~dalingrin...32-beta3.1.zip) – This is the latest beta version of CM7 that was available at the time I did this! There may be some instability, but they fixed the battery issues with this release so the tradeoff is worth it.
Or get the latest stable version update-cm-7.0.2-encore.zip
(http://tinyurl.com/3vyanhh)
gapps-gb-20110307-signed.zip
(http://wiki.cyanogenmod.com/index.ph...Latest_Version) – This was the latest google apps version that was available when I did this. It will give you access to the android market!
2) Get any microSD card that you don't mind trashing the data on. There a LOTS of options out there, but I would HIGHLY SUGGEST getting a SANDISK, CLASS 4, 8 GB or 16 GB card. It is by far the most likely card to work well for you.
Also get a reader for your microSD card. I got one that plugs into my USB port and lets me see my microSD card on my desktop.
3) The first step is to install the .img file to the microSD card. First, you need to double click it on your desktop and let mac osx unzip it for you. It should do this nicely and your resultant file will be:
generic-sdcard-v1.2.1.img (i.e. the .gz at the end will go away)
To install the .img onto the microsd card, put the micro sd card into your card reader. It should pop up on your desktop as a disk. Mine was called “no name”.
To write the image (called burning the .img file to), you need to do the following:
-Find which drive the sd card is mapped to. To do this on mac, you can use the terminal:
how to open the terminal:
a) Go up to the magnifying glass in the top right of your mac.
b) Click on it and search for the word “terminal”. The first thing it finds should be a little black box with the word Terminal.
c) Click on that and a window should open on your desktop. That window should say something like Terminal – bash – 80x24 in the top line and then have a bunch of words, maybe something about Last login: and finally a line that ends in a dollar sign $. Here’s where you will type in your commands.)
Inside of that terminal, after the dollar sign ($) first, type:
cd Desktop
That will take you to your desktop. If you now type
ls
This should show you a list of all the files and folders on your desktop. All the terminal does is let you work with files using text commands rather than a nice graphical interface (i.e. clicking on windows and stuff)
Now that you know a couple basics on “terminals” type this:
diskutil list
This lists all the spaces on your computer where things are stored. You need to unmount the microSD card that you just plugged in. This will allow you to erase the card and put what you want on it. You need to look at this list and figure out which drive# is your microSD card. To the far right, you will see the disk size. Your microSD card should be around that same size as what you bought (for example, I’m using an 8GB card and found the disk that was around 7.5 GB).
Once you know the right disk (mine was disk1, yours may be different) unmount that drive by typing this:
diskutil unmountDisk /dev/disk<#>
(to be explicit, my drive was disk1 so I typed: diskutil unmountDisk /dev/disk1)
It should say: Unmount of all volumes on disk<#> was successful
Next type:
dd if=generic-sdcard-v1.1.img of=/dev/disk1
Everything needed should copy right over to the card. It took my laptop 140 s.
Now unmount the microSD card, but NOT the same way as what you just did. How? Remember when you connected the microSD card and a folder popped up on your desktop? Right click on that and select “unmount”. Note, it might be the case that the folder was renamed “boot”. If that’s the case, that is the folder to unmount.
After the microSD card disappears from your desktop, remove your microSD card from the laptop and plug it back in. The folder named “boot” should pop up on your desktop. Now the easy part.
Drag and drop the file:
update-cm-7.1.0-RCO-encore-2.6.32-beta3.1.zip or update-cm-7.0.2-encore.zip
Into the “boot” folder. Now right click on the “boot” folder and unmount.
Take out the microSD card and put it into the nook color. Turn the nook color on and it will boot. A little penguin might pop up followed by lots of techie looking things flashing on your screen. That’s fine. Keep an eye open and when its done, the screen will go blank. It should turn itself off, but probably won’t reboot. You need to hold down the power button for around 8 seconds to turn it back on. It will reboot into CM7.
(note: This is updated from prior CM7 installations (i.e. these instructions are specific to installing the CM7 beta). If your unhappy with the performance of the beta, you can install a CM7 version that’s labeled as “stable”. The stable versions occasionally need to be turned off manually (i.e. by holding down the power button for 8 seconds)).
You’re almost there. You should have a homescreen with a few icons. Find the one labeled “settings”. Open this up, go to Wireless & networks, and connect to your wireless network. Now CM7 is ready to go online and you can turn off the nook color and install the Android Market.
You need to turn off the nook color. Take out the microSD card and connect it to your computer again. This time, two folders will pop up. One called “boot” and one called “sdcard” or something similar
This time, drag and drop:
gapps-gb-20110307-signed.zip
into the boot folder. Now comes the second hardest part, booting into recovery. The process depends on the version you are installing.
If you are installing the beta version I reference above then put the microSD card into the nook color and boot into CM7. Once you’re in CM7, hold the power button until a menu pops up and choose to “reboot”. Choose to reboot into “recovery” and you should be all set.
If you’re installing one of the “stable” versions, put the microSD card into the nook color and boot to Recovery Mode. In order to do this hold the nook N key and press and hold the power button for ~5-6 seconds. It may take a couple of tries. The screen may turn off a couple times. You may boot into CM7 a couple times. Eventually, with luck on your side, you will successfully boot into “recovery mode” and google apps will be installed. Once you manage to boot into recovery the screen will flash up lots of techie text, similar to when you started CM7. It should go blank when this is done. At this point you can turn it off by holding power for around 8 seconds. Turn it back on, follow the screen instructions and you should be good to go with an android tablet with the full android market, all running from your microSD card!
Setup Wizard stuck?
I actually got this working on the first try a couple weeks ago and it was fantastic!
I was able to play netflix and flash for the first time, and now my dad wants me to do his nook the same way. He has a 16GB sd card though, and the original instructions didn't work on >8gb cards. I can't just image his SD card to my SD card because I couldn't get my google account to de-register etc, so I started from scratch with my card and planned to image to his before configuring any user accounts.
I'm having repeated trouble with my retry attempt though
Basic CM7 install with the generic-sdcard-v1.2.1 and update-cm-7.1.0-RC0-encore-2.6.32-beta3.1 (the ones recommended as of today in the instructions)
I set up wireless access, shut down, and backed up my card at this point.
Copy the current 20110307 gapps to the boot partition, eject, put it back in the nook, boot into recover (I've gotten good at this), it installs, shut down. Back up my card again as I figure this is where I'll want to start the other card.
Back to the Nook, boot up, get past the CyanogenMod scateboard screen, and it goes to "Setup Wizard". This should be for setting up the Google Apps Marketplace account I think, except it's completely black except for grey bar across the top with "Setup Wizard" on it, and the bar across the bottom with menu/back/search/battery indicator etc (these do nothing).
I can press power button and get only two options: shut down the tablet or reboot the tablet. I can rotate the nook and the UI changes orientation. Nothing else does anything as far as I can tell.
Anyone else seen this problem? I've searched, and even tried to post to the dev thread, but I can't due to low post count.
Help! (and thanks in advance!)
*.gz img file not recognizable & not zipped
Hi. I rooted my Nook with Autonooter and love using it. YouTube and all work fine, but I would like to redo with CM7. I have all that I need, except I'm caught with the img file this time round. It has an extension .gz. Win32DiskImager does not recognize it. Some sites say that it needs to be unzipped, but it's not zipped. I hate being stuck before even beginning. I hope that you can explain why I'm having this trouble. TY!
The .gz file is just a compressed .img file.
There are a number of Windows apps that can de-comress the file, for example: 7-Zip
Martyn
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
I saw this suggested: "I did a full format (not quick) and used WinImage to write the SD card instead. Works every time since then," by TL Jester here. I"m just curious why there always seems to be a roadblock.
sGooss said:
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
Click to expand...
Click to collapse
I had this same problem, i discovered that it created a partition on the sd card... I had easeus partition master home edition, which i used to resixe the partition and you can see your full 16GB then.
sGooss said:
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
Click to expand...
Click to collapse
I had an error message like this too. It turns out it was because I was trying to use the internal card reader in my laptop. I bought an external USB card reader, and it worked fine with the same card.
Originally Posted by sGooss View Post
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
babyfine24 said:
I had this same problem, i discovered that it created a partition on the sd card... I had easeus partition master home edition, which i used to resixe the partition and you can see your full 16GB then.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Ditto, same problem, same solution. When you write the image to the card it seems to create a default boot partition of 117mg. When I tried to put both the rom and gapps in the boot partition after writing the image, I got that message (but not every time). So I made the boot partition bigger before adding rom and gapps, using Easus. I increased it to 150mg or so, that was plenty.
One time image+rom+gapps barely fit in the boot partition, and while installing I got an error that said not enough space in disc. I redid it, making the partition bigger, and it worked. I think the installation process may temporarily use some of that boot partition space.
Wish I could post this to the "Size agnostic SD Boot" thread, but as a Noob, I can't.
Have: New NC, had 1.2, updated to 1.3. Created bootable CM7.1 stable card on a new Sandisk 4GB, Class 4 card as per instructions in that thread. All seemed to go well. Upon start up, I see my new Android home page. After several seconds, I get an error: "Sorry! Process system is not responding". Gives me a choice between "Force Close", and "Wait". Choosing either seems to not make a difference. I have no WiFi connection, and going to settings I can't seem to enable it. After about 3 minutes, it freezes. But before so, I can interact with my new (impressive!) system.
Tried:
1. Numerous reboots.
2. Re-flash SD card. Three times. No good.
3. Went from 7.1 stable to latest Nightly.
Symptoms are always the same, right down to the time it takes to freeze.
If I don't interact with it after boot, the screen goes blank, but I detect a slight background light - is this perhaps the SOD problem?
Ideas?
What brand is your SD card?
Sent from my NookColor using Tapatalk
Sandisk 4GB, Class 4 card
I've read a bit about a Wifi driver patch, but I can't get the NC to run long enough to try and patch it in.
I recently bought a refurb Nook and install CM 7.1 Stable on a Sandisk Class 4 8gb card without issue. I'm actually shocked at how well it runs.
Maybe you got a bad card?
I'm sure somewhere you might find a utility to see if the card has issues? Check the SANDISK website.
Installing CM7 on the 4GB card was a temporary move, as I just had to try it. I have a 16GB card that should show up today. So, given that....
I installed CWM on the 4GB card, and it seems to work fine. However, I doubt that CWM "stresses" the card to the extent that running full Android would.
Keeping fingers crossed that a different card may work.
Hans.
I am using a 4gb class 2 Sandisk card and it works great. I have 8gb class 6 Transcend cards and they are not as good. I get force closes using them with certain apps.
Update: New SD card - *exactly* the same symptoms. Same error immediately after Home screen loads: "Sorry! Process system is not responding", and then it freezes solid in about 3 minutes regardless what I'm doing. And no Wifi.
Just as before.......
Try downloading the images again and start over.
"Try downloading the images again and start over. "
Well, in effect I did. I tried a couple of different versions of CM7. Also tried redoing the .img loader/boot file.
In every case, I get exactly the same symptoms.
4regt4 said:
"Try downloading the images again and start over. "
Well, in effect I did. I tried a couple of different versions of CM7. Also tried redoing the .img loader/boot file.
In every case, I get exactly the same symptoms.
Click to expand...
Click to collapse
Did you ever download the SASD image file again?
Also... since you don't specify... did you download the 1.3 image and not the 1.2 or the update?
DizzyDen said:
Did you ever download the SASD image file again?
Also... since you don't specify... did you download the 1.3 image and not the 1.2 or the update?
Click to expand...
Click to collapse
Yes, tried once to download the .img file. I'm reasonably sure it's 1.3, as that is in the file name. It took FOREVER to decompress - like an hour. Used gzip for the heavy lifting.
Just curious.... Would an even slightly corrupt .img loader file even work? I mean, it seems that it's job is to load CM7, and then after that is done, the rest is up to CM7. Is it possible that a bad .img file would basically work, but load a slightly corrupted CM7?
Don't know if it's an issue with the Nook itself. Has been running B&N 1.3 super stable, and for the last couple of days (with ~8 hours/day), I've been on a ManualNootered 1.3 with no problems or instabilities whatsoever. Did the MN install (as well as a bootable CWM) with the same SD, USB adapter, and PC with no problems.
Really scratching my head over this one.
Thanks.
Use this search on Google....there is some interesting stuff out there. One guy tracked it down to being an ALARM set on his clock.
Search google with this :
Sorry! Process system is not responding cyanogen
4regt4 said:
Yes, tried once to download the .img file. I'm reasonably sure it's 1.3, as that is in the file name. It took FOREVER to decompress - like an hour. Used gzip for the heavy lifting.
Click to expand...
Click to collapse
This is the part that gets me. I've made a few of these cards and all I ever did was unzip the image file with winzip and write the image to an sdcard with winimage. The unzipping process only took a few seconds.
4regt4 said:
Yes, tried once to download the .img file. I'm reasonably sure it's 1.3, as that is in the file name. It took FOREVER to decompress - like an hour. Used gzip for the heavy lifting.
Thanks.
Click to expand...
Click to collapse
Something wrong with that I just tested how long it takes to take the generic-sdcard-v1.1.img.gz file and decompress it to generic-sdcard.img and it took 15 seconds
What are you using I am using winrar 3.41 and my PC is like about 4 years old so not a fast processor.
Download winrar trial and start again
Again, I appreciate all the help. Here is what I've done:
1. Read a bunch of the stuff from the suggested Google search. (doh! - should have done this first). There is little Nook specific, but it seems that some apps on some devices seem to be the guilty culprit. I had only loaded 2 apps (Tweek and Priceline) on my NC before trying CM7.1, so if it is an app, it would have to be one of those, as the rest of the apps are pre-installed B&N, which (I assume...) the rest of you have. (Note: being new to all this, I'm surprised that their is no obvious way to uninstall an app. Seems I remember some sort of app manager on Market. I'll look.)
1a. There are several reports of alarms being set on alarm clock apps causing problems. On my fresh CM7.1 install, the clock did indeed have 2 alarms set. I deleted them and rebooted. No good.
2. Since there is a possibility of this being app related, I cleared the caches from CWM. Reinstall. It appears that this is a moot point, because I noticed in the install routine that it says "clearing caches". Oh well.
3. Got fresh copy of 1.3 .img file, and installed WinRAR. The unzip was a lot faster, but still not super speedy - about 1 minute (1GHz PC, WinXP)
4. Redid the SD chip again with my fresh files. Getting good at this. Win32Imager, safe remove, reinsert, copy CM7.zip, save remove, boot in NC.
5. No good. "Sorry! Process system is not responding". I've heard conflicting info whether "Wait" or "F/C" is better, but it doesn't seem to matter in my case.
So, short version: Tried new SD, new file downloads, new unzip utility. Meanwhile, over in eMMC land, rooted B&N 1.3 is cruising along just fine, with no errors or crashes.
Sure would like to try CM7, though.
At this point the only thing I can think of is that the sd card boot is conflicting with your rooted emmc. I've only created cm7 cards for stock nooks and never ran into any problems.
Malave said:
At this point the only thing I can think of is that the sd card boot is conflicting with your rooted emmc. I've only created cm7 cards for stock nooks and never ran into any problems.
Click to expand...
Click to collapse
Well, as I mentioned earlier, I did most of this messing around before rooting 1.3. I only applied ManualNooter after it was becoming clear that CM7 might be a long drawn out process. I was needing Market access. FWIW, the boot manager that you can boot into from the card (enabling selection of SD or eMMC) has been working with both 1.3 and rooted 1.3 - which I suppose it should. I mean, nothing got broke in that department.
Anyway, I really appreciate the comments.
Just a thought ----
Is the v1.3.img file shown in the original procedure compatible with B&N 1.3 and blue dot partitioning? Or does it even matter? I'm guessing that it shouldn't matter, as CM7 is supposed to be running from SD, but perhaps the partition sizes on the SD are mimicked from eMMC, and incompatible?
Boy, I'm really grasping at straws here.......
Ok last one, did you try formatting the sdcard?
Sent from my SCH-I510 using XDA App
Malave said:
Ok last one, did you try formatting the sdcard?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Yes, no, kinda, and sorta. The various cards that I used were new. So I basically assumed they had a fresh 'virgin' chip that would tolarate most anything. Again, assume. However, burning an .img file I think would render a format moot. Don't know that, just making another assumption.
Hi guys,
This is my first time posting but I have lurked on the forum for a long time so I first want to thank all of you for all the great information that has helped me root my phones, my first nook, customs roms and all. You guys are amazingly smart and makes me wish I played a little less sports in school and studied a little more. So again, thank you for all the sharing of knowledge on this forum.
So to my problem. I have had a Nook for months, was running Cm7 and life was grand. It was on my dresser and my dog knocked it off and split the screen right down the middle. I went 2 days ago and purchased a new one. With the issues of the locked bootloader on the Nook Tablet I decided to stay with the Color that I had already grown to love.
I have been trying to root it but keep running in to problem after problem. I downloaded win32 and half the time when I try to put the CWR image on the SD I get error 8. I have found many ways on here to fix that but it still happens HALF the time. I am running it as admin and running the oldest version. The other half of the time it will look like it is burning to image and says it is done. But after it finishes my computer will not let me open the SD device to put the zip files on it. When I try it says that it must format the SD card to open it. Every time.
Also, just to check if everything is working right, after it says it has finished burning the image on the SD I have put it in the nook to make sure it boots in to CWR, it does not. It boots normal.
My nook is version 1.2.0, I use the correct file for my SD card size, I format it using Panasonic SD Formatter and I cross my fingers, click my heels 3 times and wish upon a star. Nothing is working.
I believe the issue is my computer. I am running 32bit Vista on an older computer. I believe last time I rooted my first nook I used the laptop, but that computer has since exploded in a ball of fire and is no longer available to me.
I'm stressed. I am at the point where I would be willing to pay for somebody to mail me a boot ready SD card.
Any advice is appreciated and thank you in advance.
I assume
+ you have 2 NC, one that been knocked off by your dog and one is new, v1.2.
+ you want to run CM7 off the uSD
am I right?
Correct. I have the broke one with a non working screen and the new one which is 1.2.0
I do not want to run Cm7 off the SD but install it to internal memory. I want to flash CM7 on it and for it to never know it used to be a nook.
Have you considered the possibility you have a bad sdcard on your hands? Thats what it sounds like to me, either that or a bad card reader.
Also try redownloading the image file and maybe pointing us to the link your using so we can verify its correct. I actually just mounted the usb once I was in CWM and transferred the zip files I needed over then.
I have considered that. I have used multiple SD cards, I am trying a different new one at this moment as well. It very well could be the card reader, if that is the case then I am in trouble because there is not much I can do about it.
Here is the version of Win32 I was using.
Trying that one now. Thank you.
Edit.
I downloaded the different win32 and it wrote the image right away. I then went to open the card to pull the zip files on it but again when I try to open it I am told that I need to format it before I can use the disk.
This is frustrating.
Once again though I want to say I am very appreciative of all the help.
Edit Edit:
I put the SDcard in to the nook just to see if it would load CWR from the SD and again it did not and simply booted as normal.
Are you running Win32 as Admin?
---------------------------------
Sent from my LG Optimus V using Tapatalk
I am running it as admin. I learned that lesson the first time I rooted. I am pretty sure the issue is my computer. I've updated my drivers but I am nit sure why there is such an issue. The computer is more than 5 years old so there could be a number of issues.
At this point, I would be more than happy to pay somebody to send me an sd card and return it to them. I travel often for work and it is such a geeat tool for my business and I did not realize how hard my every day work would be without it.
Once I write the image file my computer will not let me open the disk to place the zip files. If I could get past that it would be ok, I just can not figure out why it keeps wanting to format the disk before it will let me open it after writing the CWR image file.
Yep the issue is the burning if the image. Make sure you use one of the USB ports on the back of your machine when burning the image. I've found that the ones in the front can cause issues depending on the machine used.
It sounds crazy, but try formatting the card in your Nook first. I think it might solve your problem.
Alright we got everything working now!
So I tried a few different sd cards. I would use the size of image for the size of SD card. 2gb and 8gb. I formatted the 8gb and used only the 1gb image and it worked no problems.
I had followed some instructions that ended up giving me the black screen of death when it would start to boot up. I reformatted and flashed 1.0.1 stock nook, then re-flashed CM7 and all is well now.
Thanks guys!