Database Develop

[Q] is there a rom that can be stable overclock on the 806 frequency?

I use gingerdx v12 and can sometimes restart itself (unstable)

Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.

processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.

for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..

I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium

OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.

hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain

can't overclock more then 748mhz using nAa11 nd custom rom xperience v4

Sent from my E15i using xda premium

oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate

More is not a good idea for daily use... You will get some lag in multitasking..
Best for daily use (to my point of view) is 122 / 729.. More my phone was very laggy sometimes..

how to overclock in the first place?
can someone please give me the link on how to do it??
thanks!

Bah,
Go on parameters > cyanogemmod > performance > CPU : select your frequencies, check overclock and keep on boot and reboot.
If you've got the good kernel (as naA), that's all

i'm using gingerdx v22 with stock kernal
and i can OC it To 787
but i prefer 748 or 768
it's just luck!
but 748 is good,isn't it? at least for me

You can try and play with various governors,i think some go higher....

Guys, in general, there are 2 kinds of X8 concerning hardware.
If you got lucky, then you can overclock your X8 up to 806.
On the other hand, if you are unlucky (like me), then you will NEVER be able to have a stable OC over 719. It is just a matter of hardware

i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android

wilbso said:
oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate
Click to expand...
Click to collapse
or no..for me it's the same..but i use alfs and i can go up to 768mhz..in nAa i only can 748mhz..
then OP, CHANGE KERNEL!

I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock

signashoes007 said:
i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android
Click to expand...
Click to collapse
Follow the steps in this thread (http://forum.xda-developers.com/showthread.php?t=1020313) and then you will be able to overclock your X8, even without unlocked bootloader.

if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??

boisdulait said:
I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock
Click to expand...
Click to collapse
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Sent from my XPERIA X8 using xda premium

signashoes007 said:
if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??
Click to expand...
Click to collapse
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.

I can Oc to 691mhz only ....
guess am the most unlucky here... ;(

I can overclock to 729 mhz!!
After dat phone works like a charm!!
SONY ERICSSON XPERIA X8
ACHOTJAN SEMC DEBRAND ENGINE V1.0 FINAL
bootloader unlocked ;-)
nAa -11 kernel

NIMBAH said:
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Click to expand...
Click to collapse
Yes I saw.. I should have edited my post.. but thx

Triptamine said:
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.
Click to expand...
Click to collapse
nice to hear that..thanks!
anyway, when I went from v22 to v23b, the x8oc.ko on the module folder has been deleted..so i guess(not really sure) that it would be deleted when you install another rom..
-gab-
earth android

Module-OC

Hello,
My phone -xperia x8 white e15i
Kernel - Stock
It don't matter what Rom I use I can only OC till 691 MHz at 710mhz my.phone freeze and reboot.
also I get reboot time to time on 691.
I heard that very x8 should atleast be stable at 710
my question is.
Do I get a higher stable frequency if I use a different module other than Dix's???
I came across a module which offers a higher frequency .... search for better overclock you will find the thread.....so will I get a higher frequency? ?? using the other module???
I USED THE SEARCH BUTTON BEFORE POSTING.
so don't yell at me. : )

Help
I'm not too sure about this one since I'm a part noob much like you but have you tried flashing a different kernel such as Alfs? linuxxd is really good but doesn't allow overclocking as I found out with the same problem as yourself Sorry I meant stock kernel doesn't allow overclocking ...
If I helped you please answer my question on a new thread I made

It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.

A custom kernel allows better overclocking most of the time. When I was on stock kernal the highest I could get to was 710Mhz before rebooting. With a custom kernel I can get to 787Mhz before rebooting.
Sent from my E15i using xda premium

@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????

Chris95X8 said:
It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.
Click to expand...
Click to collapse
dependent on yes. with stock kernel to kernel naa 691 Mhz 806 big diference

what about.a different module??? it can increase potential? ??

noobismyname said:
@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????
Click to expand...
Click to collapse
You need to understand that the stock kernel is not designed for overclocking, it's only possible with modules for stock kernel.
You can try the other module but I doubt it'll be any improvement, if you want better overclocking you really should install a custom kernel.
Sent from my X8 using xda premium

overclock

Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you

dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
Of course the life of the cpu is reduced but not so much. I think it is not dangerous unless you set performance for scaling. I usually overclock it at 729 Mhz and have not problems at all

dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
i don't think it's dangerous if it still around 7xx, cuz i've use that for a while now n it's ok.
but i've try oc once with 864mhz and i found some problem that it suddenly get stopped working(hang), i try to reboot n it still the same.

will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks

dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
I use it almost all the time at 844mhz...i hv no problems...but i think it reduces life to someextent
Sent from my GT-S5570 using xda premium

techlearn said:
will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks
Click to expand...
Click to collapse
Here u go...i hope this might help
http://forum.xda-developers.com/showthread.php?t=1485122
Sent from my GT-S5570 using xda premium

techlearn said:
will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks
Click to expand...
Click to collapse
If you have stock, then there is no overclock for you. Usually, custom ROMs have overclock feature and apps like setcpu, nofrills, etc works on these ROMs.. You'll have to flash custom ROMs first before you can OC or you can check this page from godell:
http://forum.xda-developers.com/showthread.php?t=1485122
OC kernels for stock rom.. Disclaimer: Read first before you do anything. Do it at your own risk..

710 MHz is veeery safe. I only stopped my OC at 806 MHz because on 825 Mhz it was not stable.
At 806 MHz my phone do not heat up, and I didn't notice my battery dying faster.
PS: I OC my phone for more than 6 months continuously (GOvernor: LilgV2; I/O: noop). And use No Frills CPU.

I am having S5570DDKQ7 BaseBand Version, coz in thread he has mentioned not to use this for DDKQ7 version. Please post it in the thread.
as i am not able to post in thread coz i am having less than 10 posts.

thank for all

[Q] Can't change CPU freqvency?!

I'm on stock XXAMG4 rooted rom. Root works but I can't change CPU freq. I tried SETCpu and NoFrills but neither works. Only thing I can change is governor. I don't want to overclock my device, I want to set min. 400 mhz and max. 800 mhz but when I select those freqvency nothing happens.
Any tip?

Gusta_HR said:
I'm on stock XXAMG4 rooted rom. Root works but I can't change CPU freq. I tried SETCpu and NoFrills but neither works. Only thing I can change is governor. I don't want to overclock my device, I want to set min. 400 mhz and max. 800 mhz but when I select those freqvency nothing happens.
Any tip?
Click to expand...
Click to collapse
use a kernel that allows you to set a frequency

I would never think of that...
Sent from the other side of my Galaxy!

Gusta_HR said:
I would never think of that...
Sent from the other side of my Galaxy!
Click to expand...
Click to collapse
stock kernel is very limited
there are a two modified stock kernels that you can try just remember to do the backups

efaustino84 said:
stock kernel is very limited
there are a two modified stock kernels that you can try just remember to do the backups
Click to expand...
Click to collapse
Got it. When Power saving mod is active I can change cpu clock whatever I want.
Sent from the other side of my Galaxy!