Related
I'm looking for a gingerbread install for a bell I9000-m basically just need to make sure that the swype keyboard is fairly decent or similar to the bell one and whichever replacement is found here.
Im guessing I'll need a link to a stock modem driver but I've never done this before with much success besides just kindof bumbeling through a bit.
Let me know anything that could help in my quest here.
I would like to find some links to a good set of files for this update. I've read at many places that for bell you must ask for specific files for this task as it must be more complicated for the bell setup for some reason.
Even a Nexus S firmware if port-able to this device would be fine.
chamunks said:
I'm looking for a gingerbread install for a bell I9000-m basically just need to make sure that the swype keyboard is fairly decent or similar to the bell one and whichever replacement is found here.
Click to expand...
Click to collapse
Any firmware for the i9000 works on the i9000m. There are plenty of threads in the development section with gb roms. Just download the KC1 modem for either Odin or CWM and flash that - I won't get into details, there are a bazillion threads discussing how to do this properly on the i9000m
chamunks said:
Let me know anything that could help in my quest here.
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=656&nojs=1#goto_forumsearch
chamunks said:
I would like to find some links to a good set of files for this update. I've read at many places that for bell you must ask for specific files for this task as it must be more complicated for the bell setup for some reason.
Click to expand...
Click to collapse
You need to stop reading whatever forums you're reading, and stick to this one. There are no specific files, and it is no more complicated than any other i9000.
chamunks said:
Even a Nexus S firmware if port-able to this device would be fine.
Click to expand...
Click to collapse
Then use Cyanogenmod. Again, all of these are in the development subforum.
You mention Cyanogenmod but wouldnt that be froyo?
I didnt really mean just link me to the specific forum subgroup I was hoping for some more specific direction I realize my question wasn't that clear i suppose. Anyways I've basically just had trouble changing the firmware on this device before and I really dont want to end up bricking it with a bad firmware flash.
Basically a good starting point example link would be fantastic I will do some more research and if i manage to do this myself I will post my findings just to close the thread.
Flash JVH and then flash KC1 modem, done.
I also dont want to install a beta gingerbread release if at all avoidable and mostly a vanilla or highly reccomended third party custom would be fine too.
JVH is official release in parts of Europe. I'm with Bell, running JVH with KC1 modem since its release and absolutely no issues.
chamunks said:
You mention Cyanogenmod but wouldnt that be froyo?
Click to expand...
Click to collapse
No, CM7 is 2.3.4 which is Gingerbread. Cyanogenmod 6 (which was froyo afaik) never really came to be on the i9000.
chamunks said:
I didnt really mean just link me to the specific forum subgroup I was hoping for some more specific direction I realize my question wasn't that clear i suppose. Anyways I've basically just had trouble changing the firmware on this device before and I really dont want to end up bricking it with a bad firmware flash.
Click to expand...
Click to collapse
There isn't really anything specific for the i9000m. Really, its just a matter of picking a rom and following the flashing instructions. If you're flashing a stock release (like JVH lets say), use Odin, flash the tarball with update bootloader checked and once thats done, flash an appropriate modem for Bell (for 850mhz), like KC1 that I find works very well.
If you're flashing a cooked rom, like those in the development subforum, then you'd flash something like JVH, flash an appropriate kernel with clockworkmod (I prefer speedmod, but there are others), then you'd install the cooked rom through cwm recovery.
chamunks said:
Basically a good starting point example link would be fantastic I will do some more research and if i manage to do this myself I will post my findings just to close the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1011901
That thread should have all the information you need on flashing JVH along with screenshots and links to the roms.
chamunks said:
I also dont want to install a beta gingerbread release if at all avoidable and mostly a vanilla or highly reccomended third party custom would be fine too.
Click to expand...
Click to collapse
As others have said, JVH is an official release for a lot of European carriers. It will work fine on the i9000m. I was running JVH + KC1 Modem for a while before switching to the latest Cyanogenmod nightly (which works absolutely fantastic now).
If you're looking for an official Bell Gingerbread release.... you'll just have to keep waiting. Bell is slower than the second coming. Just keep a full KC1 or JL2 (with bootloaders) around so you can flash back to stock if you need be.
Also, you said you had trouble flashing before. I'd suggest following that link in my post above, and if you get stuck, come back and we can step you through.
And finally, you really can't brick you phone as long as you are able to access download mode and 3 button recovery. Absolutely make sure you can access these two modes before flashing anything.
I have actually had issues getting into recovery mode sometimes but not usually, but have no problem entering download mode. I think at one point I wound up with upload mode... which doesent seem to be documented... But dont quote me on that one as it was a while ago (after searching high and low on my NAS I cant find the photo i took sorry). I have actually had to send this phone off to bell to get them to fix it twice now.
Once due to my inability to do this properly without making a forum post asking these question and another due to a bad Kies update sending my phone into a boot loop.
So you say Cyanogen nightly works well im thinking I might give that a shot as im sure there are good reasons why you would want to use cyanogen over another release. Im just hoping for no weird Telco specific crap on my phone unless its Bell specific if i must have even that.
Would I go into the ROM list thread for the cyanogenmod nightly? http://goo.gl/IBbEm
Which leads me to this? http://goo.gl/b5UwG
or is there a better way to obtain CM7? Also what would be a good location to try and find my modem driver (KC1)?
I'm sorry to spam questions here but one final one. Would there be a good boot loader that I should strive for, if any?
SaneinOne said:
JVH is official release in parts of Europe. I'm with Bell, running JVH with KC1 modem since its release and absolutely no issues.
Click to expand...
Click to collapse
I am running the above now. I was on Darky 9.5, then upgraded yesterday to Ficeto JVB, Dark Core 2.2 and Darky's v10 RC6. Then flashed Dark Core 2.3.
I then flashed KC1 modem this morning.
Running great and loving the rom so far.. its a base rom, so not a lot of features in it but at least i can customize it to how i like it so far.
I've downloaded this file I9000UGKC1 ## 512.PIT 2.2 2011 March from samfirmwares I'm hoping it works out well for giving me the modem driver.
And
Gingerbread 2.3.3: XWJVH from http://goo.gl/AEYzr to get a gingerbread release with a boot loader.
I will now look for a copy of odin hopefully it doesn't matter which version I get but I've noticed there is allot of fuzz when it comes to odin versions or even where to obtain it even. I want to obtain it from a legitimate source but it seems as though there is no specific location as to where to get it.
At some point I would like to try Cyanogen as everyone holds it in rather high regard though I'm not really sure what the benefits would be.
Some roms on here come with odin. You can also get it from samfirmware. The development thread is where you will find all information for each release. There's a few sources for cwm flashable modems. Odin isn't bad at all, it can be a little finicky with win 7 64 bit for some people but I have had no problems with it at all. Good luck and hope you find a rom that suits you.
Sent from my GT-I9000 using XDA Premium App
shadoslayer said:
There isn't really anything specific for the i9000m. Really, its just a matter of picking a rom and following the flashing instructions. If you're flashing a stock release (like JVH lets say), use Odin, flash the tarball with update bootloader checked and once thats done, flash an appropriate modem for Bell (for 850mhz), like KC1 that I find works very well.
Click to expand...
Click to collapse
Do you see much of a difference with the KC1 modem? Im running the JVO modem and it works fine for me usually have 3-4 bar connection, 3G tends to run quite often and get a 1Mbps down and 2 Mbps up connection, only thing I notice is that it runs on the 1900 band mostly
Any benefits to switching to KC1? Battery savings?
Do you see much of a difference with the KC1 modem? Im running the JVO modem and it works fine for me usually have 3-4 bar connection, 3G tends to run quite often and get a 1Mbps down and 2 Mbps up connection, only thing I notice is that it runs on the 1900 band mostly
Click to expand...
Click to collapse
Turns out the
PDA: XWJVH
MODEM: XXJVO
CSC: NEEJV3 or XEEJV3 (Only difference between NEE and XEE is the CSC code)
Build Date: Wed May 4 18:03:59 KST 2011
Click to expand...
Click to collapse
seems to work fine with working modem from http://goo.gl/02b7S
BUT
there is no OpenVpn OR SIP and those are the two things that I really wanted out of gingerbread.
I personally found JL2 better than KC1. I get up to 5mb/s down and 3mb/s up.
About cyanogen, you gotta try it to see . I didn't believe the difference would be noticeable either...
If you want modems for cm7, click the JL2 modem link in my sig, there's a post full of them.
For modems for other roms, look over there : http://forum.xda-developers.com/showthread.php?t=876391
And just like everyone else said, you can flash i9000 roms on i9000m without any problems - in fact even flashing a different modem isn't necessary, depending on your provider, it's just better.
those are features commonly found within the custom roms for jvh
Thanks for this thread. Provided the modem for me to get this working properly.
If I were you I would stick with a Daryky rom. his 10 finaly is a little slow and glitchy at times so I recommend 10 RC6. it's a stock jvh rom with his tweeks. Cyanogen is basically vanilla rom. it's so fast (the best i've flashed so far) but it's missing swype, like you stated you wanted that. I tried getting the beta swype but it didn't work. anyways i'm actually liking the gingerbread keyboard haha. so ya, if you need swype stick with darky rom, if your looking to try an amazing rom try cyanogen.
The swype beta installed without any problems for me on cm7...
The only thing is I speak french, so either I get the english keyboard, or I get the "France" french one... which is AZERTY... u_U
spectre85 said:
If I were you I would stick with a Daryky rom. his 10 finaly is a little slow and glitchy at times so I recommend 10 RC6. it's a stock jvh rom with his tweeks. Cyanogen is basically vanilla rom. it's so fast (the best i've flashed so far) but it's missing swype, like you stated you wanted that. I tried getting the beta swype but it didn't work.
Click to expand...
Click to collapse
I used Darky's rom for a looong time before switching to something else. I really didn't like the theme (at the time), and I found roms that seemed to perform better. I also ran a deodexed JL2 that I cooked myself for a while.
You can get swipe APKs from just about any custom rom out there, just pull the apk out of the .zip and install it. Or, I just signed up for swipe beta and installed it - works great.
Anyway, I guess the bottom line is that there are so many options available, and so many fantastic cooked roms available in the development thread, that trying them and finding one you really like is the only way to go.
Hello, SGS newbie here (phone not actually arrived yet, will be here Monday).
I think the phone looks amazing, only thing I'm not mad on is the iPhone look and feel Samsung have gone for with the home screens, so I'm thinking of either customising it or putting a different ROM on the device. Cyanogen, Darky's and MIUI are the ones I've read about the most.
What is Darky's? Is it more or less a stock Android with LauncherPro, or is it more than that?
Edit: also wondering - is the Samsung Gingerbread ROM worth trying, does it solve some of the performance problems of earlier versions?
Everything is worth trying! If you want to skip the usual newbie routine, then jump straight ahead to an AOSP ROM like CM7 or MIUI... You won't regret it.
Try Tweaky's AOSP
click on my signature to check out Tweaky's AOSP rom - a slim and quick Nexus S (purer Android) look-a-like rom
oh....and I expect your phone will come with GB installed any way...if not, depending on your supplier, Kies may offer you the firmware upgrade when you install it, and despite some reports (in my opinion) it represents a big improvement over 2.2 Froyo.
All the new custom roms are based on 2.3.3 gingerbread any way
Also pretty newbified here, but is it possible to get GB simply on a kernel flash and stay on stock rom, or will i have to flash a custom rom to do this. I have froyo 2.2 but speedmods kernel - pretty happy but would like to try out GB.
wangchung_sucks said:
Also pretty newbified here, but is it possible to get GB simply on a kernel flash and stay on stock rom, or will i have to flash a custom rom to do this. I have froyo 2.2 but speedmods kernel - pretty happy but would like to try out GB.
Click to expand...
Click to collapse
Just flash the JVH gingerbread with bootloaders.
STOCK.
wangchung_sucks said:
Also pretty newbified here, but is it possible to get GB simply on a kernel flash and stay on stock rom, or will i have to flash a custom rom to do this. I have froyo 2.2 but speedmods kernel - pretty happy but would like to try out GB.
Click to expand...
Click to collapse
Navigate to Ramad's stock rom thread, choice of stock 2.3.3 rom there, both odexed and deodexed
Cm7 is pretty much same as nexus s rom with lots of additions( theme manager,dsp,cyanogenmod settings,etc). You can also try sammy gb roms if you wish( flash with odin,there is guides about it just google) but you have to downgrade the bootloaders before you go back to cm7 ( I bet you will)
Thanks for the info folks. I guess I'll stay on the stock rom at least for a few weeks and get used to it although I reckon I'll use launcherpro with it as I don't like the samsung launcher.
Vivasanti said:
JVH
Click to expand...
Click to collapse
That's something else I meant to ask, what are these three letter codes I see around - are they version numbers for the Samsung roms?
That's something else I meant to ask, what are these three letter codes I see around - are they version numbers for the Samsung roms?[/QUOTE]
ABC ABD ABG versions of firmware build 2.2.1 version ABC followed by ABD etc
samfirmware.com for build list ..
jje
First post, so take it with a grain of noobness.
I would like to get my feet wet in the rooted phone arena by using Voodoo, but I don't see that it has been updated for the Cappy running stock/ ATT Froyo. I see some stuff on the I9000, though, but I'm not sure if that will work, and the information seems somewhat dated.
So a few questions: is there another lagfix I can try that doesn't involve flashing a ROM?
Can I use Voodoo lagfix on my 2.2 Froyo phone?
Should I just nut up and do some more homework and flash to one of the latest ROM's?
You should definitely read more. There are dated kernels for 2.2 that will have lag fixes implemented that you could use, although I would suggest roms.
but reading its best
Sent from my I897 using XDA Premium App
neo9973 said:
First post, so take it with a grain of noobness.
I would like to get my feet wet in the rooted phone arena by using Voodoo, but I don't see that it has been updated for the Cappy running stock/ ATT Froyo. I see some stuff on the I9000, though, but I'm not sure if that will work, and the information seems somewhat dated.
So a few questions: is there another lagfix I can try that doesn't involve flashing a ROM?
Can I use Voodoo lagfix on my 2.2 Froyo phone?
Should I just nut up and do some more homework and flash to one of the latest ROM's?
Click to expand...
Click to collapse
Well, If you like Froyo, forget about stock froyo and flash a custom ROM. Cognition is good. Plus the froyo custom ROMS are easier than most to flash. If you are a noob, this is where you should start. just make sure you READ TONS about flashing before you flash the first time. Good luck!
jack man said:
Well, If you like Froyo, forget about stock froyo and flash a custom ROM. Cognition is good. Plus the froyo custom ROMS are easier than most to flash. If you are a noob, this is where you should start. just make sure you READ TONS about flashing before you flash the first time. Good luck!
Click to expand...
Click to collapse
I run the latest froyo version of Cognition and absolutely love it. Ive run into small issues with just about every other rom ive ever flashed but with cognition I dont even run into the casual force close. Its just smooth as butter. I would highly suggest flashing an entire rom as typically the kernel is made to work directly alongside that particular rom.
Read up first though or your going to end up with a pretty little paper weight.
Lagfix on stock is stupid.
Reading and comprehension are the best but consider, when you've picked out a rom youtube it and see if an instructional video has been made on how to flash and watch it, twice if need be. I only recommend these because , being a noob( I speak from being one ) you don't know the time frame between steps, and if it sets on one for a few minutes well..it can be a little un-nerving ,anyway ,custom is the only way to go,.
well it would be different if he asked for 2.3.3 lagfix..
I just got a captivate last night and i have unlocked and and rooted it
it has a firmware of 2.1 - update 1
idk if thats the most recent update
i was told i can not update the phone with a t-mobile sim card in it so can anyone post a thread on updated versions and what do you all think is the best rom?
THANKS
There is no "best" rom. It's what's "best" for you. Read the forums and learn to flash 2.2 roms first.
I must warn you, flashing becomes very addictive.
Sent from my GT-I9000 using XDA App
Yea i know i have a sidekick 4g and ive tried about every rom on it
thanks for the info though
Tyler0309 said:
Yea i know i have a sidekick 4g and ive tried about every rom on it
thanks for the info though
Click to expand...
Click to collapse
I recommend trying MIUI, the customization is what puts it over the top!
Here are a few different versions of MIUI:
Galnet**What I prefer**
http://www.galnetmiui.co.uk/twooey/v3/Twooey-V3-i897.zip
Prototypes release
http://forum.xda-developers.com/showthread.php?t=1066885
MIUI.us
http://roms.miui.us/1.8.12/MIUI.us_captivatemtd_1.8.12_Eng_Deo_ZipA_Signed.zip
Ok ill give it a try..do i have to update to a different version> im running 2.1 right now
Tyler0309 said:
Ok ill give it a try..do i have to update to a different version> im running 2.1 right now
Click to expand...
Click to collapse
I've not been on 2.1 since phone came out. I would use odin one click to goto 2.2 stock. Root it then install cwm and then follow this guide if your going to try Galnet's MIUI.
http://www.galnetmiui.co.uk/content/forum/guides/(guide)-i897-galaxy-s-captivate-gb-bootloaders/
Then just pop the MIUI.zip on root of sdcard and install from CWM.
Tyler0309 said:
I just got a captivate last night and i have unlocked and and rooted it
it has a firmware of 2.1 - update 1
idk if thats the most recent update
i was told i can not update the phone with a t-mobile sim card in it so can anyone post a thread on updated versions and what do you all think is the best rom?
THANKS
Click to expand...
Click to collapse
Wow... so... You should probably READ a lot more before flashing anything, but I'll give you a few hints to get you going:
1) Make sure you understand what a "PBL", "SBL", "Kernel", and "Modem" are and how they are placed/installed in your phone.
2) Learn how to correctly and safely use ODIN (and/or Heimdall).
3) Learn about the various methods of recovery for "soft bricks", and if necessary for your hardware revision, possibly invest in a jig (also learn what a jig is)
4) There are 2 different types/branches of ROMs for the Captivate:
-- Samsung Branch
-- AOSP Branch
Within the "Samsung" types you have:
- i9000 ROMs (like JVP, JVR, JP8, etc)
- i897 ROMs (like JF6, KF1, etc)
Within the "AOSP" types you have:
- CM7
- MIUI
- Other AOSP-based ROMs
Which is "better" is relative. CM7 and MIUI have features that aren't present in the Samsung ROMs, and both offer a bit more customization than the Samsung ROMs. However, only the Samsung ROMs offer GPU accelerated video playback, and they tend to have significantly better battery life than the AOSP-type ROMs. Also the Samsung-type ROMs used to be much more stable than the AOSP branches, but recently, the tide may have turned in the other direction. Some of the low-level radio settings are also unavailable in any of the AOSP builds. And finally, some of the Samsung stock camera features are unavailable in CM7/MIUI.
It really all depends what you want... Do you want closer to stock "open source" Android? Or do you want Samsung's vision of what they think Android should be?
Also, the whole kernel/modem part is dependent on what branch of ROM you plan on running. When using a i9000-Samsung ROM, you pretty much have to use an i9000 kernel and modem. When using a i897-Samsung ROM, you pretty much have to use an i897 kernel and modem. The rules for CM7/MIUI are a bit more vague, but at the very least you'll need to use a CM7/MIUI (most AOSP-type kernels are interchangeable) compatible kernel.
The best advice is really to try them all out and see what you like the most. If you're currently on stock 2.1 (which it sounds like you are), at the very least you should upgrade to some variant of Gingerbread (2.3.4 preferably). You will definitely notice a big difference in terms of speed and functionality. From there, well, it's all really up to you...
OR alternatively, just start throwing stuff on your phone and see what happens. Just PLEASE don't come crying back in the Captivate General forum with a "OMG I bricked my phone!!! Plz help!!!" thread. Fair warning...
Just a suggestion, but become familiar with Odin one click. Make sure your captivate has 3 button recovery, and read, re- read, and read again the directions of every rom before you flash it. Always make a nandroid back up if possible, and read the threads.if you have questions, so did someone else and the answer is probably already out there .use search. Some People will rip your head off if you don't. as far as miui goes .....i was a flashaholic when I got phone. After switching to miui, It is very unlikely that I will ever leave. Best rom ever imho. And it updates every Friday so that satisfied the flashing urge. Usually it gets better with each release. The last couple have been a little rough though. Might want to spend the 8 bucks and have a download jig on standby. Can get it from mobiltech videos. Its worth it though
Sent from my I897 using XDA Premium App
Shammyh said:
Wow... so... You should probably READ a lot more before flashing anything, but I'll give you a few hints to get you going:
1) Make sure you understand what a "PBL", "SBL", "Kernel", and "Modem" are and how the are placed/installed in your phone.
2) Learn how to correctly and safely use ODIN (and/or Heimdall).
3) Learn about the various methods of recovery for "soft bricks", and if necessary for your hardware revision, possibly invest in a jig (also learn what a jig is)
4) There are 2 different types/branches of ROMs for the Captivate:
-- Samsung Branch
-- AOSP Branch
Within the "Samsung" types you have:
- i9000 ROMs (like JVP, JVR, JP8, etc)
- i897 ROMs (like JF6, KF1, etc)
Within the "AOSP" types you have:
- CM7
- MIUI
- Other AOSP-based ROMs
Which is "better" is relative. CM7 and MIUI have features that aren't present in the Samsung ROMs, and both offer a bit more customization than the Samsung ROMs. However, only the Samsung ROMs offer GPU accelerated video playback, and they tend to have significantly better battery life than the AOSP-type ROMs. Also the Samsung-type ROMs used to be much more stable than the AOSP branches, but recently, the tide may have turned in the other direction. Some of the low-level radio settings are also unavailable in any of the AOSP builds. And finally, some of the Samsung stock camera features are unavailable in CM7/MIUI.
It really all depends what you want... Do you want closer to stock "open source" Android? Or do you want Samsung's vision of what they think Android should be?
Also, the whole kernel/modem part is dependent on what branch of ROM you plan on running. When using a i9000-Samsung ROM, you pretty much have to use an i9000 kernel and modem. When using a i897-Samsung ROM, you pretty much have to use an i897 kernel and modem. The rules for CM7/MIUI are a bit more vague, but at the very least you'll need to use a CM7/MIUI (most AOSP-type kernels are interchangeable) compatible kernel.
The best advice is really to try them all out and see what you like the most. If you're currently on stock 2.1 (which it sounds like you are), at the very least you should upgrade to some variant of Gingerbread (2.3.4 preferably). You will definitely notice a big difference in terms of speed and functionality. From there, well, it's all really up to you...
OR alternatively, just start throwing stuff on your phone and see what happens. Just PLEASE don't come crying back in the Captivate General forum with a "OMG I bricked my phone!!! Plz help!!!" thread. Fair warning...
Click to expand...
Click to collapse
Well said.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Tyler0309 said:
I just got a captivate last night and i have unlocked and and rooted it
it has a firmware of 2.1 - update 1
idk if thats the most recent update
i was told i can not update the phone with a t-mobile sim card in it so can anyone post a thread on updated versions and what do you all think is the best rom?
THANKS
Click to expand...
Click to collapse
a very simple and easy way to start with...
2.1 is eclair..
2.2 froyo
2.3 gingerbread..
means 2.1 is oldest and 2.3 is latest in case of official roms..
so obviously new version will hav more features and faster in speed...
so now u can take baby step and install 2.2 ..and use it for few days..and get the feel of it..then again after sometime u can install 2.3...
or else u can directly jump to 2.3....which is gingerbread....u can install stock kf1 on ur phone..its leaked official gb...if u search a bit..u will get it..
then u can use it for a lil while and get the feel of gb stock rom..in the meanwhile u can read xda abt available custom roms..and then install any of them...
coz every memeber here in xda will suggest the custom rom they r using..coz they r lovin the rom then only they r using....like for me..since the time i started flashin..i always used APEX ROM..so i will say its the best....
but again thats just me..
so decision is always urs...
Right, ive had a i9000 for 5 months or so, and ever since i got it, ive found it to be slow, at times laggy. And hate alot of the crap samsung put on it.Which ive not even used.
I reckon its about time i start to make the most of my phone, but dont really know where to start, with these custom roms and rooting and what not.
I basically want it to run smoothly and possibly add a tweaks/features to it which could possibly improve it. However i remember reading somewhere, that ill lose the camera features if i install a custom rom. :l (i could be talking from my arse here)
Also i read that android 4.0 is coming or has come out. Would i be able to upgrade my phone to it ? and should i ?? If not what is the best rom to flash which will make my phone faster and smoother.
Is there anything at all to make it significantly faster, or is it limited by hardware :/
Im currently on:
kernal version 2.6.29
firmware 2.1 -update1
Which i havnt messed with since i got the phone.
Thanks, and sorry for the daft questions.
Oh dear! did you wrote 2.1? Please read basic root steps and install custom rom. I recommend you to start with Cf-root
go here :- http://forum.xda-developers.com/showthread.php?t=788108
As far as 4.0, please wait.
innovat0r said:
Oh dear! did you wrote 2.1? Please read basic root steps and install custom rom. I recommend you to start with Cf-root
go here :- http://forum.xda-developers.com/showthread.php?t=788108
As far as 4.0, please wait.
Click to expand...
Click to collapse
Lol Is 2.1 bad ? hahaha
Sorry for sounding dim, but what have you pointed me to ?? rooting ? installing a rom ? updating kernal ?
And what is the difference between these ? are all 3 needed to get the phone working as i want it to ?
Im totally new to everything andriod so can you please be as clear as possible.
Thank you for your reply.
And sorry again for all the questions.
skweezer said:
Lol Is 2.1 bad ? hahaha
Sorry for sounding dim, but what have you pointed me to ?? rooting ? installing a rom ? updating kernal ?
And what is the difference between these ? are all 3 needed to get the phone working as i want it to ?
Im totally new to everything andriod so can you please be as clear as possible.
Thank you for your reply.
And sorry again for all the questions.
Click to expand...
Click to collapse
OK, here we go...
1. First of all you need to root your device to install a custom rom or kernel. So first root your device with the above thread (cf-root).
2. Choose any rom from so many roms available all over xda. Choose only from the topic which is under your device's category, not from other device's rom,lol.
To do this you need Odin(use search)
3. Once done you will have custom rom and also custom kernel if you wish.
After these you can go for lagfix, like changing from rfs to ext4.
Best of luck.
Thanks, so after ive rooted with cf-root. do i have to install a custom rom and custom kernel, both ?
And which is considered the best rom and kernel ?
thanks
regards
Hey Skweezer,
Recommend you start with these threads:
http://forum.xda-developers.com/showthread.php?t=939752
and:
http://forum.xda-developers.com/showthread.php?t=723596
They will tell you about how to connect your phone to your PC (Samsung USB drivers + adb), 3 button mode (how to avoid bricking your phone), backing up important/unrecoverable data (like your EFS block!), and what (in general) needs to be done to flash custom firmware.
After that, you should be able to pretty much recover from any error (like unplugging your phone mid flash). Now you can go ahead and root your phone and start exploring the wonderful word of custom roms! As for which one is the best, that's like asking "how long is a piece of string?" Some people prefer speed and cutting edge, others value battery life and stability, some aim for the middle of the road.
Personally I've tried tegrak kernel and was really impressed with the speed improvement! However, the limited app space finally turned me back to other kernels. I found the rest to be pretty much six in one, half dozen in the other (ie all about the same)... so pick one you like and just go for it... use it for a while and if it's not to your liking, flash again
Just a quick rundown on android for you... firmware 2.1 = Eclair, 2.2 = Frozen Yoghurt, 2.3 = Gingerbread, 3.0 = Honeycomb (tablet only version of android) and 4.0 = Ice Cream Sandwich (unify android for phone/tablet/tv again). There is a HUGE performance increase from going stock 2.1 to 2.3! so even if you just upgrade to Samsung's Gingerbread release (2.3.3 I believe?) you will notice better performance. Doing lagfix, kernel tweaks, etc is just icing on top of the cake. However, you'll find once you start tweaking, you won't go back to stock
Well, easiest way of starting is installing KIES and letting it update your phone. That's the official way and you won't have to bother with details like kernels, roms, bootloaders, etc and won't void your warranty (if that's the case).
You'll probably be left with with some 2.3.x version. Might as well make a backup from your stuff before upgrading, kies sucks in a general way, but may help you with that.
From that point on, if you still want to press further into customization goodness, there are PLENTY to chose from.
There are mainly 2 kinds of roms:
- Samsung based (someone picks up a sock samsung rom and modifies it with scripts, kernels, themes, apps, etc). These are most of the ones you'll find in the development section of this forum.
- not samsung based (like Cyanogen e MIUI). These are built from Google's sources directly and totally skip samsung. Therefore, samsung apps most likely won't work here. Everything else does.
Personally i'd recommend Cyanogen 7.1 stable as your next rom. It's an extremely optimized and wildly popular rom, with plenty of options that you won't find in any stock rom. They have their own forum i recommend you to look up if you're going their way.
Whatever you do, GET AWAY FROM THAT 2.1
Cheers for alll the replies guys. Im first going to just update via kies. To an official 2.3
If im not happy with that then ill try a custom rom and rooting.
If only it was as simple as jailbreaking and iphone. lool
Right, ust updated to latest version via kies. And instantly alot better, smoother. Has some of those things bulit into the system which i always though were missing.
Ill try it for a week, and see if theres anything i need, or think is missing. Then i might go custom. But right now im happy with it on the latest official version.
Thank you guys, i think you've made me sort of like android a bit more.