Hi All,
I bought the Bell version of the phone (Vibrant) because I wanted the front facing camera... Then unlocked and rooted it and inserted my Rogers SIM and have had no issues for quite a while. I successfully loaded Froyo when it became available on Kies without any sd problems. (had to re-root but no big deal).
Now I understand that Bell has released Gingerbread via Kies, but when I open Kies, it doesn't recognize my firmware at all... just shows blank.
I un-rooted and erased all data to see if that would allow me the upgrade but still nothing...
Can anyone offer any assistance or have the files that I can install using a different method?
Much appreciated,
Jamie
Use the search Luke....
Seriously, there is a huge thread detailing Bell's KG3, including dumps you can flash with Odin instead of using Kies. The best part? Even though it is only 9 posts down from yours, I ever got you the link http://forum.xda-developers.com/showthread.php?t=1211939
If you don't want to use KG3, just flash any of the Gingerbread roms in the development forum and flash an appropriate modem. 99% of those threads include flashing instructions.
shadoslayer said:
Use the search Luke....
Seriously, there is a huge thread detailing Bell's KG3, including dumps you can flash with Odin instead of using Kies. The best part? Even though it is only 9 posts down from yours, I ever got you the link http://forum.xda-developers.com/showthread.php?t=1211939
If you don't want to use KG3, just flash any of the Gingerbread roms in the development forum and flash an appropriate modem. 99% of those threads include flashing instructions.
Click to expand...
Click to collapse
Thanks,
I did read most of that thread but can't find anyone else who's using a Rogers SIM on an i9000m... I don't like or use Kies very often and I'm getting annoyed that it won't seem to even read my current firmware. MyPhoneExplorer seems to read it just fine but Kies seems to only want to be some kind of media toy.
I will borrow a Bell SIM to see if it will recognize long enough to use the Kies update, and if that fails I'll flash with Odin.
I assume I'll have to root again once I flash?
robinsonj said:
I assume I'll have to root again once I flash?
Click to expand...
Click to collapse
Yes you will.
make sure you have the latest version of kies, also make sure your csc is set to BMC (open dialer *#272*"your imei"*), select BMC and isntall that will factory reset your phone btw... after that it should work... I am not sure that a Rogers Sim card is affecting it, have you tried just pulling the SIM altogether and connecting? Are you running any custom ROMs currently or have you in the past? Maybe flash back to UGKC1 with Odin if you are and then use Kies to update.
Ended up finding some detailed instructions on "MostlyIrrelevant" for installing 2.3.4 with a Rogers (and Bell) supported Modem. a couple more steps to install the ROM, but it's a deodexed version of the international release with the bloatware removed and TW Launcher removed and replaced by TouchWiz... nicely also has CWM and Titanium in it too, so flashes are much easier from now on. (small workaround to get Bluetooth working but the solution was also in the comments section.) Next step to get back a couple pieces of Samsung bloatware back on... mostly SocialHub and Samsung e-mail... so I can connect all my contact lists and e-mail accounts into one place. I bookmarked the link to Pharaohnough's posting of the apks for these apps (THANKS!) that I want back but will have to wait 'till after work to try them.
Related
Hey,
First of all, I tried to find the answer tot he problem in the forums before posting but I was unsuccessful.
I am having some trouble rooting my Bell i9000M. It came with Froyo when I recieved it. I tried androot, z4root, and SuperOneClick but they all failed. In my forum research I came across some comment that said z4root does notwork with the UGJK4 version.
I am restricted to 2 computers, a Mac and a laptop running Ubuntu Linux, so it'd be difficult for me to use Kies for anything.
What is my next step in rooting the phone?
I also tried to flash a kernel, which I read I can do without root access usining heimdall but this error occured: unknown required load command 0x80000022.
My phone is able to do into 3-button recovery and download modes.
Thanks in advance for your help.
Alex.
edit: spelling
Upgrade to Jl2 use superoneclick it works.
Sent from my GT-I9000 using XDA App
have done a lot of reading over the last week trying to work out how to root my SGS i9000M, checking both these forums as well as android & phandroid, as well as googling the issue and trying the Market. I've also checked out many youtube videos on this topic but they seem out of date now. I note the most recent thread on here by liv4air (march 2011) but it doesn't really help with my query.
I am a total noob with regard to this - only heard about rooting a couple of weeks ago but I definitely like the idea. My 1st handset had to be replaced due to a sound issue (it had 2.2 Froyo) - was replaced with a handset sourced for Canadian market (linked to Bell - has lots of stock apps from them that are useless to me). I'd like to get rid of them to start with, but this handset is running Eclair 2.1 - didn't realise this for awhile after it was replaced and didn't actually understand the differences between the builds and firmware.
So now i've got GT-i9000M, Eclair.UGJH2
kernel [email protected] #2, firmware version 2.1-update1 (updated via Kies).
I have tried the one click root download which put the 'update.zip' file on my SD but when I tried to install this in the recovery mode (have discovered that I have the download and recovery mode buttons - also totally new to me!) there was a red error message:
E:Error in /sdcard/update.zip
(status 7)
Installation aborted.
Have seen the Ryan ZA OCLF in Market too, but understand that the 'rooting' ability has been removed from that app.
Have downloaded the Odin3 program to maybe try to root it via this method but am confused about how to get kernels/which ones to get...or even if that's what I have to do! can find various kernels etc at SamFirmware but not really sure how to use them.
Am I even close to working out how to root this phone!?
Please help!
Flash EZbase : http://forum.xda-developers.com/showthread.php?t=991792 with odin. All the instructions you need are over there.
It's a complete, stock rom except for a few modifications (such as root and cwm recovery), you can choose to download froyo or gingerbread depending on what you want to flash next, if you do.
(Froyo is the 2.2 android OS that has more stable custom roms/kernels while Gingerbread is the new 2.3.3)
Also since you're on a i9000m, you may want to flash a "i9000m" modem (with the 850mhz band) found here: http://forum.xda-developers.com/showthread.php?t=876391 after flashing, but it's not necessary.
Thanks for that link - it looks promising so i'll read through it properly and give it a go soon. I can't query to that forum as it's a development thread but a couple more queries...just want to make sure i don't do anything stupid!
The instructions state: Download all the EZOdin, EZbase CSC, PDA, PHONE and PIT if you do not have Samsung Kies installed, The Samsung USB Drivers will be required to.
Do you know if this means to download ALL those things if I don't have Kies installed, or just PIT if I don't have Kies installed? I do have Kies installed so not sure which of the above I require.
And on the Kies topic, it also states: If Samsung Kies is used please make sure you kill all Samsung Kies related services that are running (kies, tray agent, etc.)
sorry if i'm making you smack your head in disbelief at my ignorance, but does this mean I can use Kies to flash a kernel to my phone (and hence not need the above)...or that when using EZOdin to flash my phone, I need to make sure I have Kies completely shut down during the process?
And I assume by having Kies on my PC, I do not need to download the samsung USB drivers.
Thanks!
What the first sentence means is that you will need the usb drivers if Kies is not installed. There's a period missing I guess.
For the second one, it means you need to close Kies completely before flashing.
Thanks!
Got EZOdin, and the PDA/PHONE/CSC files, but when I click on the EZBase pit file this is all that's written on the page it opens:
v˜4
Edit: don't know why the rest of my post wouldn't complete above, but no luck in downloading the EZOdin.pit file, either at home (or now here at work).
Any thoughts? Reiterating my noob knowledge (or lack thereof) - I assume the .pit file is crucial to the process? Is there anywhere else I get this file, or another .pit file that will suffice?
Maybe i'll do some reading on PIT....
Rooted successfully!
been a bit of a task over the last fortnight trying to work out the ins & outs of rooting, the ways to go about it and to find a method that worked, which i've finally done.
this is really just a post in case anyone in a similar position and feeling as lost as i was along the road to discovery might benefit from how i managed it.
(and this assumes you've already read the many disclaimers out there about bricking your phone, & making sure you do a lot of reading of the threads on this topic)
i ended up using shortfuse superoneclick. got the program from shortfuse.org - v1.9. i downloaded it and ran it with my anitvirus turned off. It worked fine as per the instructions on the website (shortfuse.org) or in the thread here.
Bell Galaxy Vibrant i9000M
recently upgraded from 2.1 to 2.2 via Kies
UGKC1
kernel 2.6.32.9 [email protected] #4
...now to do some proper exploring and fun!
Well done, take your time and,welcome to the world of fast galaxy s!!
Sent from gt i9000 insanity 8.5/fugumod
see these instructions: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
good kernel, root, cwm and excellent, clear instructions
lgsshedden said:
see these instructions: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
good kernel, root, cwm and excellent, clear instructions
Click to expand...
Click to collapse
Now rooted and have gone and obtained TiB, Terminal Emulator, Wireless Tether and Root Explorer.
Had the speedmod kernel downloaded and was going to try to flash it to my phone via Odin as per the link you provided but wasn't sure if the kernel itself would root my phone and didn't get replies for my query about that.
So...now that i'm rooted you would still recommend flashing the speedmod kernel? I would assume mainly for the benefits of the kernel itself? Any likelihood of problems arising, having already rooted with SuperOneClick?
Thanks for your advice - the speedmod does sound good and have heard many happy reports from users.
yes it would have rooted you hence my suggestions for using it: sorry to have not been more clear
yes the speedmod kernel would be an upgrade over the stock one but my signature indicates what I use now: very fast and outstanding, not available on xda
I was never able to get oneclick to work as it was blocked on my pc, so my solution stemmed from having to find an alternate answer to a problem like yours
its fun once you get started: lots of help, even more opinion!
Hi guys purchased an SGS from Hong Kong, im in NZ, its on 2.1 and im desperate to get it to 2.2, is there anything i need to lookout for when upgrading?
If something happens and i need to revert back to stock do i need to use the HK firmware or can i use one local to my country?
Whats the best method to upgrade to 2.2, should i use a custom rom?
any help would be sweet, been reading alot but getting confused.
You should search up a program called odin. Its a pc program that most people use to flash their phones. Its also very versatile, can flash 2.1, 2.2 or 2.3 etc. Careful though, flashing the wrong settings may cause your phone to not boot. The guides on odin are pretty clear though.
Another thing to familiarize yourself with is clock work mod recovery. Its an app on your phone that can also be used to flash firmware or install applications - very useful.
Should something go wrong when flashing, there is a thread on xda called EZ base. Its a pre configured set of odin files that are very effective in restoring a phone in bad situations.
Youtube may be your friend to help you see how this type of thing works but nothing beats trying it yourself
Thanks ive done heaps of reading, aware of both those programs, just worried about flashing the wrong rom!
Flashed roms on android before but all my phones have been from my country
will look for the EZ base thread as back up.
Just check in your settings which version of Android is on your phone now, then go to samfirmware.com and check with which region your firmware coincides. There firmwares are generally split by continents, so all Asian firmwares should work for all Asian SGS but check to be sure coz your phone may have been imported
hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff
kbg1 said:
hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff
Click to expand...
Click to collapse
you need a euro based rom (official or custom) and bell i9000 modem.
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
that i don't know, 'cos i am on 2.3.5 with af974's ROM since day 1
kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.
theREDlegion said:
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.
Click to expand...
Click to collapse
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff
kbg1 said:
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff
Click to expand...
Click to collapse
Thanks for the offer. But no need to go through all of that unless you can un root with something like super one click (fast and easy, but I don't think that will work for you). If your tab is still under warranty you might want to learn how to root and unroot and restock and such (its all covered in the forums). Otherwise I don't want you playing with your tab and have a "bad" flash trying to help me out. Do read up in the dev section before you start flashing custom ROMs.
That said if you do feel comfortable flashing and decide to make a backup for yourself I definitely wouldn't mind a copy.
RED
hi
not scared of bricking the tab,i have been flashing samsungs for the last couple years,captivates etc.my last tab i did a supposed gps fix which ended in a bootloop.
i managed to get it back but with a modified 2.2 firmware.then kies would not let me upgrade to 2.3.3(unofficial firmware error)
my problems have always been actually returning to stock.
in recovery i have the orange clockwork recovery that has an option to do factory reset.will this take me back to unrooted and unlocked???
if so consider it done.
i will need direction to do a full backup after that.
jeff
Doing a hard reset will NOT un-root or re-lock your device (as far as I know). The factory reset will clear the data and cache and should not touch the system. You have to un-root your device using the method you rooted it with or something along those lines.
As far as a backup is concerned, creating a system backup has been covered in the forums before. There is plenty of detailed instructions on performing a backuphave a look at the Roto Backup method.
Just picked up a galaxy tab ( rogers )
gt-p1000r
firmware 2.2
all stock
no root
no unlock
I would like to "give back" something
for all the HELLp you guys have given via these forums
( i swear all my grey hair started once i dumped my blackberry and went samsung and found this site! )
Anyway
If you are still looking for the a copy of the STOCK system before I start to play...
I will try to figure out how to make a copy for you
Hi XDA developers,
I'm a newbie. I've been searching posts on xda and still couldn't remedied the problem. I currently have the i9000m from Bell Canada. I upgraded my i9000m to 2.3.3 Gingerbread earlier in Kies. Recently, I've been trying to unlock my phone and without rooting, the best solution seems to be going back to Eclair, so I followed the youtube tutorial by djeddieone and tried to go back to Eclair using Odie. It basically flashes a rom (I suspect that's a T-mobile rom that shouldn't be flashed onto my phone) in Odin. My phone no longer boots and cannot get into recovery mode. (When I try to start the phone, there are random colour dots showing on the screen.) The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Thanks in advance.
I highly doubt that Bell will release a new update for the i9000m. You are better finding a newer rom (JVT or newer) and flashing that via Odin. Im using CM9 nightlies (but I feel it has too many bugs for daily use). If you can find a newer rom that is tweaked, you should notice better battery, faster, etc.
Just my $0.02
Hey I had similar issue - tried flashing new firmware w/odin & stuck with download only... I finally went to a Bell store to send it in, but they were able to use new firmware recovery software to re-flash stock gb2.3.3! I just said Kies messed-up the phone... Anyway, it will get you back to stock functionality. Good luck!
Sent from my GT-I9000M
vassosman said:
I highly doubt that Bell will release a new update for the i9000m. You are better finding a newer rom (JVT or newer) and flashing that via Odin. Im using CM9 nightlies (but I feel it has too many bugs for daily use). If you can find a newer rom that is tweaked, you should notice better battery, faster, etc.
Just my $0.02
Click to expand...
Click to collapse
I have not found any bugs since I update to the latest update-cm-9-20120425-NIGHTLY-galaxysmtd-signed.zip
bioniceric said:
The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Click to expand...
Click to collapse
Since you can still get into download mode, you're OK.
You can download the UGKG3 ROM files from this thread:
http://forum.xda-developers.com/showthread.php?t=1102881
Search for UGKG3.
The file is in 7Zip format. If you don't have something to unpack it, get IZArc.
Flash the 3 files and you should be up and running.
bioniceric said:
Hi XDA developers,
I'm a newbie. I've been searching posts on xda and still couldn't remedied the problem. I currently have the i9000m from Bell Canada. I upgraded my i9000m to 2.3.3 Gingerbread earlier in Kies. Recently, I've been trying to unlock my phone and without rooting, the best solution seems to be going back to Eclair, so I followed the youtube tutorial by djeddieone and tried to go back to Eclair using Odie. It basically flashes a rom (I suspect that's a T-mobile rom that shouldn't be flashed onto my phone) in Odin. My phone no longer boots and cannot get into recovery mode. (When I try to start the phone, there are random colour dots showing on the screen.) The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Thanks in advance.
Click to expand...
Click to collapse
After you restore your phone to KG3 via Odin/Download mode per Black Rose's link earlier in this thread, you should be back where you started on KG3.
Then from KG3 ( 2.3.3),
I suggest:
1) Use SuperOneClick to root your phone (SuperOneClick can also UNroot your phone later if you want).
2) Use Galaxy_S Unlock by Helroz available on the G-store.
This worked well for me with no problems.
And just for reassurance, NEVER flash a ROM that is not explicitly for the i9000/i9000M to this device.
So I was trying to root my i9000m and I read a forum post that advised me to update the soft key fw before doing so... little did I know I was on a custom fw already so it broke my soft key functionality. I've read a few posts that have instructions to fix the problem, by rooting the stock fw for the model and updating soft key fw before rooting again. problem is my phone was originally on FROYO and I can't locate the original file anywhere. can anybody point me to a file dl for the stock fw, or maybe someone has the file on their computer they would be willing to share? it's a bit frustrating not having the keys to go back, and i can't use certain apps due to not having a menu key..
If you don't find what you are looking for, try updating to a custom ROM that includes a Navigation Bar, as shown in the attached pic.
What's the ROM in the screenshot?
It's SlimBean 3.1 = Jelly Bean 4.1.2
With this ROM you can have up to 5 soft keys in the Navigation Bar.
This way you could care less about the phone's soft keys.
There are sites such as this one where you can find official Samsung roms
http://www.sammobile.com/firmware/?page=3&model=GT-I9000M&pcode=0&os=1&type=1#firmware
If you did manage to root your phone, you could also try this: http://forum.xda-developers.com/showthread.php?t=1832638
Thanks nyloncrack, I didn't know that there were roms that included a nav bar! I will try that, and Marshian I've gotten the firmwares from sammobile but apparently my original firmware for the i9000m (Canada) was 2.2.1, which I have found, but apparently not found the proper version of the rom that came stock with my phone. I believe it was 2.2.1 froyo. I am currently running 2.2.1 froyo.xwjsd which seems to not be the correct version.
There's a thread here with a couple of roms for the I9000m, other than that I'm afraid I can't really be of any use to you. Good luck though!
Marshian said:
There's a thread here with a couple of roms for the I9000m, other than that I'm afraid I can't really be of any use to you. Good luck though!
Click to expand...
Click to collapse
I got the jl2 rom and reflashed and it worked! I downloaded UGJL2/UGJL2/BMCJL2/Sbl (MultiCSC): reflashed with pda, phone, and csc checked and then updated the touchkey firmware and voila! I got them from the same link you posted, just before you posted it, bang on Marshian!
It was actually really simple once I wrapped my head around it, now I just need to update to a newer, faster custom rom! now let's see if I can't get this rooted and unlocked again without messing it up . any suggestions for a good, bug free rom? I haven't looked into it too much yet but i hear ice cream sandwich and jellybean are recommended for my device?
trickassfoo said:
I got the jl2 rom and reflashed and it worked! I downloaded UGJL2/UGJL2/BMCJL2/Sbl (MultiCSC): reflashed with pda, phone, and csc checked and then updated the touchkey firmware and voila! I got them from the same link you posted, just before you posted it, bang on Marshian!
It was actually really simple once I wrapped my head around it, now I just need to update to a newer, faster custom rom! now let's see if I can't get this rooted and unlocked again without messing it up . any suggestions for a good, bug free rom? I haven't looked into it too much yet but i hear ice cream sandwich and jellybean are recommended for my device?
Click to expand...
Click to collapse
Good to hear!
I've got the I9001 so I don't really know what kind of roms are available for you, but in my experience for my own phone ICS is currently the best trade-off in features and stability. JB is still quite new and not fully ported yet, while ICS is nearly bug-free. It could be different for your model, that's just my two cents. Either way, as long as you don't brick your phone you could always try out a couple of roms and see what you like best. The only downside is changing a major version requires a full wipe.
I used this to go from gb to ics.
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
This way your i9000m becomes a i9000 for searching out new ROMs.
For whichever ROMs (ICS or JB) you'll always need to flash the KG3 modem.
nyloncrack said:
I used this to go from gb to ics.
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
This way your i9000m becomes a i9000 for searching out new ROMs.
For whichever ROMs (ICS or JB) you'll always need to flash the KG3 modem.
Click to expand...
Click to collapse
I've tried using that guide before but the JVP link is invalid. i did a quick google search am i just looking for Gingerbread? because I have a file already on my computer titled "CF-Root-XX_OXA_JVP-v3.7-CWM3RFS.tar"
Yes, that will work.
Looking at my notes from back then I actually also used:
CF-Root-XX_OXA_JVT-v4.3-CWM3RFS, and
CF-Root-XX-_OXA_JVU_2.3.6-v4.3-CWM3RFS
They were just later versions of GB.
JVU was Samsung's appeasement to i9000 users when they were told ICS wasn't coming. Had a couple of ICS features; window dressing.
Remember to make a full backup before touching anything this time
I've been trying for hours but I cannot for the life of me get windows to recognize the device in download mode. It was working fine until i updated the rom, then intermittently, then i updated the rom again and it has stopped working. i've uninstalled the drivers, tried with debugging on and off, restarted windows, installed the newest version of kies, bought a new usb cable, to no avail. this is maddening. is there a better alternative to do this on my mac? I'm using a virtual system running windows but I'm positive that isn't the problem, since it was working great before on vmware, and parallels. any ideas? I'm about a half hour away from selling this device and going back to the iphone haha.
so basically my question now is how do I downgrade back to the original firmware, so I can put this nightmare behind me? I had it unlocked and rooted on gingerbread before... don't ask me how it took many many hours. now the device isn't even being recognized in kies. If I don't get this figured out soon i'm flipping this b*tch for an iphone 4, because I do appreciate the one touch jb/unlock. I've literally wasted days of my life trying to figure this out and it doesn't seem to be getting me anywhere. too bad because I really appreciate the android system and all its capabilities but I don't have the time to waste on stuff like this
Another Edit! So, after fussing and fiddling, I decided to try one more time, I swear, I was actually going to give up at this point if it hadn't worked. so basically I removed kies, loaded the driver i was using, which was 1.3.450.0 and it didn't work, so I loaded 1.5.5.0 and it connected! My guess is that after updating the rom the driver was outdated, but I figured kies would give me the most up to date driver, seems it didn't oh well, I'm almost afraid to load ics since I've worked so hard and wasted so much time up to this point, but i've come this far...
one more edit, the kg3 modem kept crashing odin on me so I had to stick with the jl2 that was flashed earlier.. which doesn't give me network access, I'll try to find another file but is there any reason odin should be crashing like that due to this particular file?
hahaha, shouldn't speak too soon, jl2 works after reboot, should I update my modem firmware now, and what is recommended for my system {2.3.4} kernel {2.6.35.7} and if i flash to ics will I need kg3? Thanks for all the help with this seemingly never ending process