I'm looking for a specific case for my nook color. Sadly, so far, none of the ones I have been looking at fit the bill.
The needs are:
1. useable inside the case.
2. waterproof (under 10 meter depth, mostly to keep rain or accidental drops in the tub from killing it)inside the case
3. Able to take a drop of 4 feet and not damage the Nook Color
4. able to take the weight of a person accidentally sitting on it.
I'm not worried about charging or listening to headphones while it's in the case. But, so far, either I've found ones like the oberon ones, which fits the shock and structural needs but not water needs, or ones like the expensive thick ziplock bag, which does not provide much more than waterproofing.
Is it just nuts for me to want to protect and armor my e-reader to a point I can use it when waiting for dawn while goose hunting, or out camping?
What you are looking for is made by Plexicorp, based out of San Francisco. They make a variety of products using a patented transparent aluminum which was developed in 1986 by Dr Mark Nichols.
Oh ha ha. we all know Scotty gave the formula to him, two finger typing on an old mac.
Seriously, a metal backed cover and frame, with padding and waterproofing, and a transparent screen cover like the fancy thick ziplock bag would work. But, as I said, everything either has the drop/sit ruggedness and not the waterproofing, one has the waterproofing and not protection, and one has the protection and waterproofing, but you can't use it in the case.
it's beginning to appear like I'll have to break down and design one my own self, since none of the makers are filling my needs. you'd think with all the campers, hunters, fishers, beachgoers, pool gatherers, and even readers soaking in a bathtub, let alone drunk college students, someone would make SOMETHING like this.
sounds like you need to be more careful with your 250 dollar toy. go get a travel case lined with foam. water proof, shock proof, and idiot proof. after that put the travel case on a three foot leash and strap it to your neck. only hit the ground if your a midget.
http://www.amazon.com/Pelican-1300-Case-Camera-Yellow/dp/B00009XVKW
You will look real snazzy walking around with this.
or, I guess you can also infuse it with the power of all mighty Odin and hope that works. i think your asking for a little too much. hunters go outside to hunt. fishers go outside to fish. hikers go outside to hike. any of the above that would use a product like the nook would just use the ziplock bag style or a hardcore pelican case and protect the **** out of it. and not take it out of said case during the hurricane.
most outdoor people would just use this
http://www.amazon.com/Pelican-1050-Micro-Case-Blue/dp/B001CNNEXY
but i doubt you want to put that in your pocket at 3.1" thick. but even with that you want a flap to store **** in. if i were you i'd start praying.
Wow, I have to say, you've got me wondering what you're planning on doing with the Nook! I'm intrigued though, I've thought myself it would be nice to have a super rugged gadget. It looks like the Otterbox case is just going to help with impacts, etc. I did find this old thread which might help..
http://forum.xda-developers.com/archive/index.php/t-749995.html
Ok. the cases I'm seeing posted fall into category 3, has the sit proof, crush proof, waterproof, but not USEABLE inside the case.
let me show you what I am looking at. Of the premade factory cases:
Option 1- URL redacted because of silly posting rules, but the Trendy Digital waterguard waterproof case. Has the waterproofing needed, but does not provide decent enough protection otherwise.
Option 2- Oberon cover, replacing the plastic inserts with either sheet steel or aluminum plate. But, this is the opposite issue from Option 1. Not waterproof.
Option 3- One of the cases mentioned. But, doesn't allow the device to stay waterproofed when you want to use it.
What am I wanting to do with it? Well, I want to be able to take it hunting, to look up tides, help identify geese, or when it's dead slow, read a book. It's often in the rain, around lots of salt water, and can get dropped or stepped on if some geese swoop in and I need to hammer. Or, take it camping, and not worry about getting caught in the rain, dropping it, or falling on it trying to carry it about. Many of these cases have 2, even 3 parts that would work, but without the whole enchilada, it's not going to do what I need.
Edit: BTW, I've taken an ipod 5g video out for 2 seasons and it's still working. the NC is actually meant to be a replacement for it, as the battery is slowly dying.
I am using a Trident Aegis on my NC. I tried it out in a medium (7"x10") Coleman waterproof pouch and the touchscreen worked through the plastic.
Related
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
If you are looking for a sleeker look check out www.proporta.com, they have a design in development , hence the special offer, but you will have to wait a while for the alu case about a month or so, but hey who's complaing when you get freeby!
roko said:
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
Click to expand...
Click to collapse
just got one! its really cool and sleek design... :lol:
I ordered the Proporta about 6 or 7 weeks ago. I received nothing since then (apart from the useless neoprene wallet). Looks like it's going to be a long time before it is finnished. I think the Inno looks far better too. I'm thinking about ordering one instead of the Proporta.
Damoncarl, could you please tell if the beltclip could be removed without to much damage?
Does the case have enough room for the extended battery?? 8) thinking of getting one if the proporta case doesn't have room, by the end of the design reveiws... and it looks like you have to keep removing from the case just to charge or use it.
It looks that neither have room for the XDA+battery.
Both the Inno and the Proporta have their pro's and con's. I think the Proporta is better for daily use, you don't need to remove the XDA from the case before usage. The Inno on the other hand gives far better protection since it completely encloses the XDA.
roko,
judging from the design I can't see how the xda can be used/charged from the case, asking cause that's the way I use mine, and everybody uses their case differently...the Inno case looks to provide better protection, (I have four cases I use depending on my daily use, guys tend to stick to one case, women tend to co-ordinate the cases with their outfits and bags!!) and your right in the respect that the Inno looks good, but as always, looks don't mean a thing if it aint practical (men inclusive in my opinion :twisted: ) and as you already have the case I'd rather pick your brains on it than have a sales person deliberatley trying to sell me something based on looks....
The Proporta has an opening at the bottom so I guess you can sync/charge and replace the smartcard without having to take it out of the case. Here's a better view...
http://www.proporta.com/Zoom.asp?id=XDAcase1.jpg
But still, it is in developement, images of the final product are not online yet (I asked for them but no response so far). The final product could differ. Wait and see
And so my choice is confirmed, da girl goes proporta! spoke to them today they say no to the batttery space but I guess I can't have all
Hopefully you won't get bored waiting for it (like me) :wink:
Did you by any change asked them when the case should be ready for shipping? I keep hearing "probably the next week" :?
roko
Yep, I did ask and was told not for ages as they just rejected the proto-type last week, apparently because you would have to remove the xda from the case for charging etc and that's not what was agreed to design wise....the guy I spoke to was so annoyed he told me not to bother ordering it yet!!! to wait a month but I will... just to have yet another case to co-ordinate.
(as women do :wink: )
Another month
I'll order the Inno so I'll have atleast one case (for the time being) :wink:
I've got one (the innopocket case) and I'm very Impressed with it. Although like anything its not perfect.
Here goes an honest review.
If you think the xda is already too big, dont buy this. If you want to protect your machine while carrying it - its like having an armoured tank protecting it! Imagine your dads old tobacco tin in brushed aluminium with a neoprene 1.5mm lining and there it is.
Its very well built - it does have a serious "no messing about belt clip" that you'd have to have serious impacts hit by a car for it to fall off. I'm a cyclist (during the week ; ) - so you'll have to excuse my practical thinking!
I think the only serious damage you could do would be to the antenna, which is the only potruding part, and even then, if it was on your belt that would never happen.
I did however make one major "mod" when I got it, I got out an electric drill and file and made a headphone socket hole straight away!
Being made of aluminium its very easy to do this, in theory you could do the same for the charger connector.
Street Cred
Although its very practical, to be frank I'm embarrased to carry it in "open view" on my belt, because it is ridiculously large. Under your jumper or jacket it acceptable. Or in your baggy Jeans pocket is another fine alternative.
In use
I even answered a few calls while listening to Mp3s in slough town centre last week, obviously the nice thing is that with the standard handsfree headset you can answer the call with the button on the mic pod, and not have to get the damn thing out of the case. Obviously in normal phone use its a pain to "unholster"
I think the main oversight is a lack of a charging hole, I think a pda on a desk with a charger lead hanging out of it is asking for trouble, one slip and your "preciousss" will go swinging to a clattering smash onto the floor, so I'd love to encase it with the innopocket during charging. (I'm getting the drill & file out now!)
Opening it Up
It did seem too much hassle to change tracks on media player by "getting it out of my pocket, opening it up, changing tracks, and closing it etc. So I just listened to my mp3s on "shuffle mode" it would be great if one was designed with buttons integrated into it, perhaps so it slots into the bottom edge connector in the same way as the clip on keyboard.
At times like that I was glad of the volume control on the headphone kit!
The opening up catch is nice and firm, so its very difficult for it to open accidentally, and as it opens "upwards" in theory as long as you are standing or sitting, it wouldnt fall out.
One of my friends did force it open because he didnt understand the way it opens, but in actual fact its made the case easier to use, because the stress exerted on the aluminium hinges if you do this enable you to open it further, to about a 80 degree angle from the closed position. This means that if opened on your belt the xda delivers at 45degrees or so.
Build Quality
I think in terms of build quality it is excellent, and certainly does protect the machine All edges were finished off smoothly, all neoprene stuck down well, definately a quality product.
Capacity
Havent tried it with the extended battery, as it hasnt arrived yet, I'll let you know if it fits, or if it can be modified.
Advantages
1) serious protection
2) serious beltclip that wont fall off in usage
3) Aluminium, lightweight, tough, and easy to mod!
4) Website order to Delivery time (under a week) and thats delivering it by airmail from suppliers in Hong Kong.
Disadvantages
1) Overall Size (too big and roomy - I'd prefer a snugger fit!)
2) Beltclip: My only criticism is that the belt clip cannot be removed, its riveted on, and being aluminium, if you removed it I guess you'd never get it back on. Otherwise its the best engineered beltclip I've ever used, I wish my old Cooltrax mp3 player's case had such a good one.
3) the only downside of course is removing it from the holder. to use it, its not exactly "quick release"
4) usual packaging problem though, when it arrived it looked like it had been opened a dozen times en route, cardboard box was creased and torn "open", but the product was intact and undamaged - I guess customs at several points opened it up to see what it was. You'd hope they'd stick tape back over it. I'd hate to send anything of a greater value that distance!
Opinions
Buy two. One for "on your belt" (modding it for headphone hole)
The other for in a bag or pocket, with the belt clip removed! and mod it for charging/mp3 playback.
The one thing I like about it is that it doesent spoil the look of the thing itself when you're actually using it. The standard O2 case sucks in that regard, and looks disgusting in my opinion. And lets face it the most dangerous aspect of using a phone/pda is putting it down. e.g. falling asleep with it on your lap or chest, or even charging it up.
When its in your hand you hang on to it for grim death. Putting it into the case is the riskiest part, especially cycling along, but hey, even doing that on a pavement is a big risk! And as I mentioned this was a doddle!
Walking along and holstering it is more of an embarrassment risk than a risk of dropping it because as I mentioned, it opens very sensibly.
Possible Improvements...
1) add a hole for charger
2) add a headphone hole
3) make the belt clip removable
4) make it less "thick" (width wise)
5) slots for memory cards inside the case, although there's plenty of room to just have them "floating around" - that said, would you risk an £80 memory card dropping out while you're walking.
6) add a button for skip track for when in mp3 usage
Conclusions
Protection 98%
Practicality 40%
Style 30%
It does "what it says on the tin" :lol:
"protect your investment"
Can you please provide a cost for the aloy case for the xda & approximate delivery cost to Australia
Thanks Peter
Follow the previous mentioned link http://www.innopocket.com/EShop/Main/product.php?ID=63 and you will see the price.
I fully agree with Derek's review but like to add a couple of disadvantages:
1) The spring mechanism started to wear out in the case I had. I had to bend them back into shape.
2) Although perfectly padded on the inside there is the possibility of having the metal on the inside come into contact with your screen. Maybe it is just me being clumsy but I was nervous every time the XDA went into or out of the case.
I stopped using it and it is lying around somewhere here.
Robert[/list]
Mine's now laying around as well... climber!
Unfortunetely it wont accommodate the extended battery
Update on the Proporta hardcase:
It seems that the first 1000 will be shippped early July. Hopefully I will be one of the lucky bastards because I'm waiting for it since last January.
http://www.proporta.com/Zoom.asp?id=Alu_XDA.jpg
Hmm... Re the Proporta case, it looks like someone else had my idea about holes for connectors!
It looks a bit slimmer than the innopocket. I'm hoping it has a cutout in the back to allow for the extended battery to poke out as well...
Somehow I dont think they will think of that one, otherwise it looks a much better design. Do let us know with a full on review when you get it Roko....
Hi I got the ali case, the thing is almost twice the width, but I really needed to stop the XDA from crashing out of my pocket, so I tried it for a few days, its like an ejector seat, My xda has hit the ground 6 times in one day, I lost my pen & a big card I had in it. Sorry it has gone in the draw.
Hi, i got my proporta ali case this morning - seems quite nice Very light and doesn't bulk up the device too much! Very strong too, no way i'll loose the screen with this baby on. All connectors/buttons can be got to with the case closed.
Will test it over the next few days!
I'm interested in the above mentioned case from Swiss Mobility. Anyone here with experiences to share with this case (used together with X1)? I can't find a distributor in Europe - anyone knows where to buy it in Europe? (I know BestBuy has them, but the nearest store is 6000 miles away and shipping is twice the cost of the case). Swiss Mobility's web site hasn't worked for some time. Anyone knows what's up with that?
http://www.xperiadepot.com/swiss-mobility-legion-smartphone-case/4A80A3757.htm
They ship to Europe with courier service (3-5 days) for 25 usd. same price for the case so I suppose its worth it if you want to order together a couple more accessories.
currently unavailable
Looks great, too bad it's unavailable!
They are probably unavailable because Swiss Mobility went under the radar.
How exactly are carrying cases worn?
I've seen people wear carrying cases only a scarce amount of times, and I totally forgot how people manage to wear these.
I have a carrying case for my phone (not the Xperia), and it is so bulky! It's for the Samsung SCH-i760 btw. Anyways, so this is how I wear it: I basically use the "clip" to clip onto my belt, but I notice it is so bulky.
So when I usually wear shirts that cover almost pass the fly/zipper of my pants. And when I try to pull my shirt down to cover my pant, it covers the damn thing, and it looks like I got big tumor on the right or left side of my stomach.
So then I clip it on my pocket, it looks better, but now the pong hangs more loosely. It's kinda funny how these carrying cases rarely have a model for them to wear the carrying case, this is because companies know that it's freaking ugly to carry these things, ugly = no sales.
So if I am doing it all wrong, and if I am wrong that it's freaking ugly, then tell me this: what is the proper method of wearing these damn things?
poetryrocksalot said:
How exactly are carrying cases worn?
I've seen people wear carrying cases only a scarce amount of times, and I totally forgot how people manage to wear these.
I have a carrying case for my phone (not the Xperia), and it is so bulky! It's for the Samsung SCH-i760 btw. Anyways, so this is how I wear it: I basically use the "clip" to clip onto my belt, but I notice it is so bulky.
So when I usually wear shirts that cover almost pass the fly/zipper of my pants. And when I try to pull my shirt down to cover my pant, it covers the damn thing, and it looks like I got big tumor on the right or left side of my stomach.
So then I clip it on my pocket, it looks better, but now the pong hangs more loosely. It's kinda funny how these carrying cases rarely have a model for them to wear the carrying case, this is because companies know that it's freaking ugly to carry these things, ugly = no sales.
So if I am doing it all wrong, and if I am wrong that it's freaking ugly, then tell me this: what is the proper method of wearing these damn things?
Click to expand...
Click to collapse
Tuck your shirt in.
beware magnets
that swiss case uses a magnet, when i had a case that used magnets i found that when i got a call the phone would wake up and as the phone passed by the magnet when getting it out it would think that the slide had been activated and rotate . by the time this happened i could not answer the call in time and it went to messaging.
This may have been more of an issue with some of the earlier roms that I was using that were quite slow to rotate.
you might be able to work round this depending on the strength of the magnet and/or what orientation you put the phone in the case.
I bought a case that is secured by velcro to avoid this problem, however a couple of months later the velcro has worn out and does not stay closed. I may get my old magnet case out again and see if the new faster roms are better at coping.
i want get this case so long already where i can get it?
Hey guys, I was just about to purchase this case but then started wondering if it would adversely affect my signal strength so I thought I would jump on here and see if any of you have used an aluminum case and what the results were...
Thanks for any info, you guys rock!
It has a very good possibility of affecting the signal since the antenna will have a clunk of metal around it. But I dont have any first hand knowledge. Why not just get a plastic case. They effect it less.
I really want a case that has a door with a window on it..do you know of any plastic one?
Anyone else have any experience with aluminum cases?
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
conradcliff said:
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
Click to expand...
Click to collapse
Sounds pretty cool, can you link us to the particular case mentioned? Other than that I have no experience with metal (aluminum is considered a metal for the banterers) cases either. Personally I would stick to plastic, but sounds neat.
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
conradcliff said:
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
Click to expand...
Click to collapse
That case is awesome. I really like it. Interested to see if it ruins the signal quality, or possibly enhance it lol I dont know.. It looks properly designed, I am sure the manufacturer took the antenna location into consideration. I would go for it. Let me know how it works out, hopefully by then one is still available. I can grab one myself.
I will have this moved for you.
Thanks for getting this moved for me Ryan..yeah, I think I'm going to purchase the case within the next few days unless someone pipes in with a negative review.
In the meantime, does anyone know where the antenna is located in the 6800?
Thanks for any help!
So, I came in here to bump the thread up one more time before I bought the case, but it was still at the top...doesn't seem like people are too concerned about Titan accessories any longer
I guess 150 views is enough though, I think I'm just going to bite the bullet and buy.
Will update once I've tested in the low signal areas that I frequent.
I had the exact same case for my xv6700 and never had any signal issues. The case worked well and kept my 6700 looking brand new!
I really liked the lexan screen cover.
I tried the seidio rubberized case for my titan. it worked awesome for about 10 months until the little tiny tabs that held it on broke off. Only a 90 day warrenty so SOL. Now I use a cudora pouch.
So let me know how the aircraft aluminum one fits!!
That's great to hear! I'm going to order it tonight and maybe upload some pics when I get it..
hi conradcliff
dont forget test review the case (how about the look, size etc) and upload the pict, i want to buy also, but it seems need 2 week to deliver it to my country
Oh I most certainly will..I'll also post the coupon code they gave me for 10% off, hopefully it will work for anyone.
Initial Review: Monaco Aluminum Case for Mogul/6800
Short answer: A well designed, sturdy case well worth the ~ $20 price. I'll add some photos soon. Sorry if I stepped on anyone's toes who intended to write one of these up, but hey, two opinions are better than one!
I've had three of these cases for three separate Sprint 6800's. Two black, one silver. For those familiar with Monaco Aluminum Cases (they made/make these for other phones, such as the 6700), this embodiment is just as good.
Pros:
Very solid design - this case can easily outlast the life of your phone. Aside from slight exterior discoloration, dings, and scratches, this case should easily withstand all normal, day-to-day use.
Inner liner - this case includes an inner liner made of neoprene that protects the phone from minor scratch/abrasion marks; that provides a very snug fit for the phone; and provides *minimal* fall protection. Two-story drops and projectile usage by angry girlfriends are not protected.
Access - the case provides access to all buttons, dials, interfaces (except for touch screen & slide-out KB). Luckily, almost all functionality of this phone can be effectuated without the touch screen (not the TP, grrrr), so you will not have to open the case too often, which is very nice. When you do open the case, the keyboard slides over the open top of the case nicely.
Vents (Air/Signal) - there are vents on the top, back, and right side of the case for air and/or signal paths. I've experienced no signal difference, or even heat difference, with this case. I'm sure it does insulate the phone to some degree, but it's minimal.
Belt Clip - the case comes with a belt clip and swivel that are relatively secure and convenient. I've had one belt clip split (the plunger portion), but it is still very usable. You don't have to use them, but I do. The round swivel that screws into the back of the case provides a nicer grip of the phone, IMHO. If you don't like either, you don't have to use them.
Cons:
Weight - it does add weight to your phone. It's not extreme, but holding the phone for extended periods of time may prove annoying by some with this extra weight. I don't mind it at all, and I have a headset and use speakerphone anyhow.
User Adjustment Required - Out of the box, this case is NOT ready to use! You absolutely must gauge how well the metal clip engages the main body of the case. Every case I've received required me to slightly bend the clip inwards to provide a stronger hold. If the hold is too weak, brushing against the side of the case (by your arm when walking with the case attached to your waist side, or by anything you may brush against) can result in your phone falling out to the ground. So, adjust the clip right away, and ALWAYS, periodically check it, as repeated opening may loosen the hold over time. Also, when wearing this case attached to the side of your hip, attach it to your left side so the metal clip and catch of the case are facing behind you. This way, brushing against something while you're walking will not accidentally open your case allowing your phone to drop out.
Plastic Cover - this cover can scratch. I tried placing a screen protectors over it, but they would never stay. The oil from your face/hands/etc, along with the lack of a frame protecting the edges of a protector from friction are mostly to blame. However I've learned that with a little care, the plastic screen can survive everyday use quite nicely.
So, I highly recommend this case!!
10% off coupon code -> EIWQC1257830
"Simply insert the coupon code during our checkout process and instantly save 10% off the merchandise.
You can use the coupon up to 5 times. This code will expire after 60 days [from 10/7/09]."
There's more to know though so don't buy until you get my review..hopefully tomorrow.
*** Note added after -- please see post subsequent on 2/12/13
Just received the "Dual View Multi Angle (Black) Folio Case".
This is not the "Origami" case of similar name which is fake leather, but is supposedly real leather, and does feel like it (though there are good fakes out there so I can't tell).
Amazon Link to Case
The tablet fit very nicely, slides in and out easily but no slop in the fit. Cutouts for everything are in the right place (can't try the pogo to see if there's room on the sides but it looks adequate). Magnetic close and activates/sleeps the Nexus 10 as expected. The inside of the case is felt, and the carrier for the Nexus has some velcro on the back, so you can pull it off and turn 90 degrees to display in portrait mode, which is easy and sure looks a lot easier than the whole bending stuff that appears to happen in the origami version. Velcro is a decent compromise between too hard to pull off and too easy so it falls off (though the noise of changing it is a bit loud for an office; I'm not sure what would be a better alternative though).
Three angles from indentations in the cover, adequate to keep it from slipping. Nice texture. Funny smell but it's dissipating and I expect it will be gone in a day.
Overall very pleased with it.
Images taken with a mediocre cell camera but may give an idea of what it looks like with the nexus inside, the last just to show texture and stitching.
Re: rooCASE Dual View Nexus Multi-Angle
Looks good but i don't see any cut for pogo cable.
Envoyé depuis mon Nexus 10 avec Tapatalk
Re: rooCASE Dual View Nexus Multi-Angle
androme said:
Looks good but i don't see any cut for pogo cable.
Envoyé depuis mon Nexus 10 avec Tapatalk
Click to expand...
Click to collapse
The cut out is on the inside carrier for the tablet , but you are correct they did not put a cut out for it in the fold of the case. I had not noticed that. One would need to open the case to attach a pogo charger, or rotate the inner case 180 degrees.
To charge it while in use and standing in the landscape position, there is a bigger problem in that the connector would be on the bottom and would prevent a tablet from sitting flat. If you rotated 180 degrees ( which you can do) the Pogo charger attaches easily at the top but then the volume controls on the bottom edge are unreachable. It is positioned as though they planned the Pogo charger only while not in use, lying flat, or on a dock (and built in), not propped at an angle?
The smell
Incidentally, I think I need to comment on the smell again. It's now sat around open for about 20 hours, and it still has a strong smell. It is not a leather smell (which I find pleasant), but something sharp, like adhesive perhaps. Within 2' or so of it, I find it unpleasant. I was relaxing with it on my lap this morning and finally had to put it away, the smell was so unpleasant.
I hope it will dissipate, and I will say I am told I am more sensitive in that regard than most, but it is a darn shame they make a nice case and use something that just plain stinks. I was a skeptic on the guy with the smelly pogo plug, but now I'm a believer. Maybe some factory in Asia has people with no sense of smell and makes both.
I still expect it to go away, but it's going to spend its first few days at a few feet from my face.
Re: rooCASE Dual View Nexus Multi-Angle
I have this case and there is indeed no cut out for the pogo charger
It also has the same smell that op is complaining about
Its also quite thick but i think that offers good protection for the device
Sent from my SGH-I317M using xda app-developers app
The smell that won't go away
I've changed my mind about this, and am discarding it entirely.
After 3 days the case still reeked of glue or solvent. Worse, I took the Nexus out of it after 2 days, and found it now smelled as well. Fortunately some damp cloth scrubbing (quite a bit actually) fixed it, but the case seemed undiminished.
If I just left it sitting out for weeks would it have been OK? Perhaps. Who knows, and I'm not going to find out.
So (and please laugh, as I did while doing it) I decided to wash it. Done quickly in a sink with some detergent (as I fully expected washing something with cardboard inside to end badly), it came out better than I hoped, with the inner and outer cases only slightly crinkled.
And about 70% of the smell was gone, but it was still there after drying. Usable? Perhaps. actually the inner case (which I expected to be a disaster after washing) was pretty good, but the fold on the outer case now sits at about a 20 degree angle when it should be flat, giving it a tented look where the front case no longer aligns. So yes -- water ruins it. But it was already ruined in my opinion but the smell, so no loss.
It's a darn shame that the manufacturer uses such ingredients. It is generally a nice case, and one of the more expensive ones. A $9 case that reeked is more forgivable.
So I strongly recommend before buying you decide if you have a tolerance for strong smells.
PS. Someone will say "why didn't you send it back". Sorry, the time to repackage and return is not nearly worth the amount refunded. Most of these manufacturers can sell crap because they know most of us who pay $10 or $30 for something won't spend the time to return it. I certainly won't, but perhaps I can save someone else the trouble.
first hand knowledge
That case looks identical to the case i bought my Toshiba thrive two Christmas' ago. I don't recall the smell but i can remember it was a good case to have because its well made and when its on an angle (like pictured) its not flimsy or shaky. It fit perfectly in my book bag and when the leather case is fully closed i had no worries about the tablet being pressed on to hard from books or anything else in my bag.
The only flaw i remember is when the tablet has been inside the case for a while it was a little bit of a pain to get it out. It was so snug that you could rip the plastic cover from the leather around it or you could press on the front and back of the table to hard, but as long as you are careful and patient the tablet will come out with no problem. I'd say its a good idea to take the tablet in and out of the case so it will loosen up a little bit. I'm easy on my stuff so im not sure how much abuse it can take but hopefully not to many people will throw around a $500 tablet but hey some people just dont take care of their possessions.
Not 100% sure if i will get this one but considering the limited accessories for our Gnex this case is a really good buy for under $20
ebay link http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=ROOCASE+NEXUS+10&_sacat=0&_from=R40
I was lucky enough to be selected to receive an review one of the new Artech 21 cases for our LG G4's. I have always wanted to try a case like this because I like the concept of having my phone and wallet stuff combined, can't forget either that way (or both if I'm really scatter brained). Sadly, I never pulled the trigger due to my wife having had a couple and the quality just not being there a various points, enough to cause a total lack of will to try one for myself.
Enter Artech 21.
I received my case very quickly and packaged VERY well. No pics there, sorry. Let's just say that their attention to detail extends beyond simple production. I got it yesterday and immediately put it to use, and let me just sum it up like this. Simply stunning craftsmanship, and perfect in every way.
All pictures were taken on a Nikon D5000 using a 35mm f/1.8 lens for ambient light with some later flash shots and the really close ones towards the end were switched to a 18-55mm kit lens.
Let's just start with a couple of ambient light overview pics.
On the front side, we have a clean leather face with a reinforced spine stitch line down the left side, and a very classy and subtle company logo on the bottom right.
On the rear we have the same spine reinforcement stitching going down the right side, and very well sized and placed cutouts for the speaker and camera. Very very well done.
Throwing that one in simply because I like how the focal point and bokeh came out.
Opened up you can see I've already put it to use. It's housing my work ID card and drivers license in the clear thumb hole pocket (VERY good idea to put the thumb hole there, makes accessing those a snap). Also houses the two debit cards I carry along with my costco membership card.
The pocket underneath the cards won't hold a fully unfolded bill, but I wouldn't expect it to either. I don't carry a lot of cash so folding bills up to put in the pocket isn't a concern. If you do carry more than a few bills this may not work for you because they would bulk up the front side quickly. Money clips ftw.
The inside of the case is finished in a very fine suede to go wonderfully with the super nice leather exterior parts.
This pic above is a look at it closed. The clasp while small, is perfectly strong and small enough to be unintrusive. The back side never sits perfectly flat due to it's designed fold for stand usage, which isn't a big deal. Even with all my cards in the front side it still sits very flatly closed. Very well made in terms of size.
Flipped view on the bottom side. You can see how the back never lays truly flat, but this is by design.
Now, I want to move on to some good stuff. I've done sewing professionally on industrial machines, so I have a good idea what I'm looking at in terms of quality. And this case is just dripping with quality. The craftsmanship is absolutely fantastic. Extremely even stitching lines, wonderful stitch spacing, straight cuts, even the back stitching on the starts and ends is perfect. Here are some close up shots below:
Last part, the holder for the phone. This was a huge fail point on the couple of cases my wife had for her G2. There are ZERO worries here. Below are installed pics of either end:
The closest comparison I can make is that Artech 21 took an Incipio Feather case and used it in their folio case. The phone is VERY tightly held in place, but utilizes the least amount of shrouding possible at the same time. I have zero worries of the phone ever popping out of this holder and case.
I honestly have found no flaws with this case. It's new to me so using the phone is a little awkward at first, but I'm adjusting fast. Using my shoulder to hold the phone to my ear is actually much easier now due to the added case thickness. It holds what I NEED to carry with me with extra room to shove a days worth of receipts and a little cash, but without leaving enough room that I start packing my wallet full of stuff.
As far as recommendations for future changes or improvements, the only thing I could think of is the potential to make the magnetic clasp two sided so you could flip the front of the case all the way around and reuse the clasp to hold it open. And maybe give the option for people to have a ID card pocket installed on the front and not have the clear one in the inside (I'd choose that because I use my ID card to get into the plant I work at every day I work). But those are two very very minor things that aren't necessities, just feedback for possible future options.
One last parting shot for posterity sake:
I'd like to say thanks to Artech 21 for giving me the opportunity to try your wonderful case and just say that if you're looking for a wallet or folio case, by all means give them a try. They're worth every penny and you won't be disappointed.
Piggyback Review
I'm going to take the opportunity to piggyback on the review by Fastbird here and not clog up the accessories thread with 50 of these reviews on the same case.
To begin with, mine is the dark version of the case, and so aside from it's obvious dark color difference, it also has a full plastic case around the phone vs. a side-to-side hug case and the wrist strap. But enough talk, let's get into the case itself.
Opening the package reveals a few things, the case which looks, feels, and smells great; a wrist-strap (I chose not to use this), a business card, and a 10% coupon code for another product with a request for an Amazon review (to come later). Having used my phones naked for the past 4 years, a case, especially the folio wallet type, was quite a change, but after 3 days of use I'm completely adjusted to it. The case definitely adds some bulk to the phone as you’d expect, but my phone spends most of its time on a desk or somewhere else, not in my pocket. I’d say ladies with small pockets are not going to find this comfortable to have in there, and even for guys with tighter pants/jeans, it’d be the same deal.
The case is very well made, definitely had the touch of an Artisan in the stitching. You will notice the backing on the leather is most likely a nylon which is glued to the natural leather back and sewn around the edges. The front and back are both double layers of leather and the spine seems to be only a single layer. Holding it in your hand is easy enough when you fold the front around. As I mentioned earlier, the plastic phone case is a full edge case vs the light brown only hugging the sides. I use the Skinomi Tempered Glass protector on the screen and it doesn’t push any of the edges up. The phone definitely isn’t coming out of the case either.
Taking pictures in portrait mode is somewhat difficult because the back tends to want to fold around easily if you don't hold it right. If a way to lock this in until you want it to be a kickstand was developed, it’d be a major improvement. The cutouts on the back don’t get in the way of your shot and landscape is easy to manage. My cutouts aren’t quite centered, but it is such a small offset, you can't notice unless you are looking for it.
Closing the case comes easy because of the magnets in the clasp. However, if you want to really use it as a wallet, you’ll find it initially difficult to put more than three cards in the slots. I couldn’t get it closed with all four slots full. I don’t plan to really use it other than for cash because I have too many cards to fit in here anyway, but if you only have a few you use often, it could be really useful.
As a kickstand, I found no complaints. It doesn’t fall down, close or otherwise cause any problems if you are just watching a show. The cutout for the speaker does muffle it if it is closed and face up, but that’s what you get with a rear speaker phone.
Overall, if you want to make a statement with your phone, don’t already have a leather back, and plan to hold some cash, IDs, etc… then I say grab one of these cases. The best part about any case is that you can always take it off when you don’t want it and put it on when you do!
TL;DR
Pros:
- Hearty construction, high quality material, artisans touch
- Firm grip on the phone
- Card slots if you're into that
- Kickstand when you want it
- Wrist strap (dark version only)
- Keeps your phone safer than it is naked
- Color choices
- Compatible with glass screen protectors
- On sale on amazon right now! http://www.amazon.com/Artech-21-Premium-Italian-Handmade/dp/B00XKHWIG4/ref=sr_1_2?ie=UTF8&qid=1435201794&sr=8-2&keywords=artech+21+lg+g4
Cons:
- Floppy back when using portrait mode camera
- Needs some stretching to fit a card in every slot and close
- Probably too bulky for tight pants, jeans, short shorts, ladies pants, small pockets in general (although I think it'd be a problem without a case in some pockets too)
- Everyone is jealous!?!
Props to Artech 21 for making a superb product, allowing me to review it for free, and bringing some extra class to my already awesome LG G4.
So it's been nearly 2 weeks since I started using this case, figured I'd post up an update. I'll just say that I'm NOT going back to anything else. I just spent the past week on vacation in Gatlinburg/Pigeon Forge TN and having this case was remarkably not cumbersome at all and extremely convenient. Case is holding up fine, no signs of wear, no split seams, no pulled stitches. Holding up extremely well for the amount of use I gave it over the past week.
Sean , you better hide your id
and remarkable photography skill
I just want to say it looks poor quality!!!!!
james491225 said:
I just want to say it looks poor quality!!!!!
Click to expand...
Click to collapse
Not sure if serious or just plain stupid.
officerdoofy said:
Not sure if serious or just plain stupid.
Click to expand...
Click to collapse
plain stupid i guess
carolineOHIO said:
plain stupid i guess
Click to expand...
Click to collapse
I vote for stupid... or troll.
Like above, I too dont want to clutter up the accessories page with reviews of the same case so ill throw some additional pictures out there and give a few pros and cons for me.
PS: Im using a leather back on my phone, just a FYI
Pro:
- Leather quality looks and feels great
- Stitching was done with what looks like a good quality thread
- Glue that holds case to leather cannot be seen and holds the two parts together great
- Leather back phone fits very snug in the plastic holder, might be a con if it pops out, but for now its a pro
- Wireless charging works with a generation 1 Samsung charging pad
Cons:
- I can fit 3 cards in my case and it closes fine, when I put my 4th card the case sometimes opens up, and with the 5th card it never stays shut. I wanted to use the case and leave my wallet at home, but I unfortunately will not be able to, at least right now. I will give the case a few weeks with 4 cards in it and trying to stretch it out. If I can fit 6 cards in the case I can ditch the wallet completely and just put everything in this case.
One last note, its not really a con for me because I have big hands and long fingers but the thick leather might be hard for some users to hit the volume down button.
If you would like any additional photos or have any additional questions feel free to ask
UPDATE 1Well I just got to my office today and I was really excited to see if it would charge on the wareless charger....and even with the thick leather back it DOES! Now I'm sure it all depends on the charger you have, but I am using a 1st generation Samsung charging pad and it works perfectly with the phone. Im sure any newer name brand unit will also work, the china models, YMMV. Pictures below
UPDATE 2After having the case on the phone for less than a week the plastic holder for the phone has started to crack with the leather back on my phone. The cracks look minimal at the moment but I will keep an eye on them to see if they spread. Updated with pictures below.
UPDATE 3Well a week and a day in one of the corners is starting to crumble. The phone looks to be falling out of the case as well. Its a shame, since I absolutely love this case. Just in case anyone is wondering, I keep the phone in my back pocket at all times when walking aroud. I have never dropped it, sat on it or anything. This is just the wear and tare of having the leather back and pulling the phone in and out of my back pocket.
Below pictures are with no cards in the wallet
Below 2 pictures are with 5 cards in the wallet, ID and 4 debit cards
Below pictures are with 3 cards in the wallet, ID and 2 debit cards
Below pictures show the phone charging on a Samsung 1st generation chargin pad
Below pictures show the cracking in the plastic
Below picture show the crumbling of the plastic and the phone starting to fall out of the case
Posted updates #1 and #2 above. Will continue to update this review as I use it.
dtmcnamara said:
Posted updates #1 and #2 above. Will continue to update this review as I use it.
Click to expand...
Click to collapse
sorry for that inconvenience
I'd like to apply to review this case, but would like to know if the plastic cracking is an isolated issue or if it's being addressed in a newer version to be released for review. Thanks!
Thank you for sharing and the photograph great
dtmcnamara said:
Posted updates #1 and #2 above. Will continue to update this review as I use it.
Click to expand...
Click to collapse
Any idea how / why the cracks appeared? Like how do you use the case, do you put your phone/case in your pocket where it would get stressed? I ask because I store my phone in my pocket and wonder.
Posted update number 3 above. Looks like it might be time to retire this case already.
dtmcnamara said:
UPDATE 2After having the case on the phone for less than a week the plastic holder for the phone has started to crack with the leather back on my phone. The cracks look minimal at the moment but I will keep an eye on them to see if they spread. Updated with pictures below.
UPDATE 3Well a week and a day in one of the corners is starting to crumble. The phone looks to be falling out of the case as well. Its a shame, since I absolutely love this case. Just in case anyone is wondering, I keep the phone in my back pocket at all times when walking aroud. I have never dropped it, sat on it or anything. This is just the wear and tare of having the leather back and pulling the phone in and out of my back pocket.
Click to expand...
Click to collapse
So pocket stress in other words. Walking and bending in part crushing / extreme pressure to the case and phone.
This is why I usually keep mine in softer plyable tpu in my front pocket. I know just walking around and going up and down stairs I apply a lot of pressure on my phone and cases. I had other previous model phone in white cases that would form stress cracks. The black versions would be slightly more flexible and not crack. Used to be many people complaining about it being a manufacturers defect.
In larger pockets my phones would sometimes rotate horizontally. If i didnt catch and rerotate reposition the phone I wouldnt be surprised to find my screen cracked from the bending pressure.
Perhaps artech should redesign the inner holder would be my suggestion. Use a more plyable nylon material, instead of ridgid plastic?
Is it a hard clip on? How hard would it be to replace the inner holder? Would be easy for a user to do it?
My review
Just got my case in today JULY/25/15. So I will edit and update as time goes by using the case.
Initial thoughts;
First I must say it is a very nice solid yet soft and supple case. The color is like a natural imperfect tanned turmeric and honey. I really like the magnetic clasp. It auto locks, you can pull flap open and clasp detaches or you can manually flip it.
Was disappoint to see it does not have the ability to turn the phone on and off when opening and closing the case.
Update JULY/26/15;
The clip on portion is ultra thin and hard-rigid plastic. The case exposes the top and bottom, allowing for direct access to 3.5mm headphone jack, micro usb port, mics and remote IR.
Functionality that is missing for me is the ability to use the phone while the case is closed, it has to be flipped open to answer and stay open for the duration of the call. It does not have a front speaker cutout.
UPDATE August/02/2015, 1 week + 1 day;
Flip back kickstand is a nice feature. It allows for the phone to be propped up while watching videos / youtube.
With normal use the case as held up nicely, showing no signs of wear.
I've been able to remove and reinstall the phone several times and have not experienced any signs of the inner holder cracking.
It is still annoying to have to open the wallet and keep the cover open to talk on the phone. It makes it awkward to handle. I've also not wanted to crease the bind by flipping the cover all the way back. This makes the phone thicker and harder to hold for smaller to medium sized hands.
So far I would recommend this case for those that like a wallet you can carry your phone in. Although what fits into it as a wallet is very limited. Perhaps better to call it a stylish leather case capable of protecting the phone and holding some important essentials.
..to be continued..
clockcycle said:
Any idea how / why the cracks appeared? Like how do you use the case, do you put your phone/case in your pocket where it would get stressed? I ask because I store my phone in my pocket and wonder.
Click to expand...
Click to collapse
the cracker due to frequently take the phone out with innappropriate way
should gently hold the case , press the camera hole to take the phone out
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
clockcycle said:
Just got my case in today JULY/25/15. So I will edit and update as time goes by using the case.
Initial thoughts;
First I must say it is a very nice solid yet soft and supple case. The color is like a natural imperfect tanned turmeric and honey. I really like the magnetic clasp. It auto locks, you can pull flap open and clasp detaches or you can manually flip it.
Was disappoint to see it does not have the ability to turn the phone on and off when opening and closing the case.
Update JULY/26/15;
The clip on potion is ultra thin and hard rigid plastic. The case exposes the top and bottom, allowing for direct access to 3.5mm head phone jack, micro usb port, mics and IR.
Functionality that is missing for me is the ability to use the phone while the case is closed, it has to be flipped open to answer and stay open for the duration of the call. It does not have a front speaker cutout.
..to be continued..
Click to expand...
Click to collapse
it is no automatic for the wake up due to we have no certification from LG , and we think we just keep it traditional way to use the wallet case
Leather quality looks and feels great!! It is very useful for me to put cards.
hahahayiji said:
Leather quality looks and feels great!! It is very useful for me to put cards.
Click to expand...
Click to collapse
maybe you I.D too