Related
So I purchased an HTC Dream from a friend and learned all about the wonders of rooting, and found what i thought was going to be a simple step by step guide to upgrade my phone to android 2.1, and was encouraged to use it after reading all the positive comments. I can't post the link to it as I'm a new user, but you can find it by entering "guide on how to root your htc dream to 2.1" into google, the article is on adroidheadlines.com...
I followed it step by step until I got to step 20. After entering:
adb reboot bootloader
i got "error: closed." Being stupid, I looked around on the internet and came across a page that said putting a file called "DREAIMG.nbh" onto the root of my sd card would fix all my problems. Unfortunately for me I did, and then used fastboot which i (think) flashed that rom (i think that's the right lingo, anyway) To my surprise, I turned on my phone to see "T-Mobile G1" on my screen as opposed to the regular "ROGERS" logo. My phone won't move past that screen and won't even boot into recovery or fastboot. I have this gut feeling i've bricked the damn thing and am looking for someone to tell me it isn't so. To clarify, I'm wondering if there is anyone to factory reset the phone or restore it to its original rom somehow while its in this state.
Any help at all would be appreciated, and i can't seem to find anyone else on the internet stupid enough to have made the same mistake, which is never, ever a good sign.
i think you grab the wrong Dreaimg, there is 2 different ones if im not mistaken.. have you tried turning off phone hold camera then power?
If you can get in there then you can use this guide
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Rogers_Dream_EBI1
These are the instructions you should have followed for Rogers..
The op was actively rooting the dream (just using a clone of the instructions with a typo) 'adb reboot bootloader' instead of 'adb shell reboot bootloader'
The wiki page has this correct, the comment on the article the op read indicates the correct one and comments in the thread on XDA indicate if you are stuck all we where trying to do was enter fastboot..
Unable to find any of what I just mentioned op left the guides for rogers dreams and switched to T-Mobile Howtos and got a t-mobile nbh, having already installed danger SPL it could be flashed.
80% of the time this would have left the user with RC29, however 20% of the time system fails to flash correctly, and you need to flash it again. This is made harder since now you have the rainbow SPL (no fastboot and security locked) 1.x radio, and a Rogers CID. Thus need a gold card.
There are many nbh files however; one with the rogers CID can be flashed without a gold card.
http://www.rogers.com/dream-zip
has the current 911 patched nbh file (unzip it).. that will let you start again, but do note nothing went wrong the first time so don't enter and endless loop please.
(Note I recommend you apply it twice to ensure all partitions are flashed correctly, rogers has the partitions layout of dangerSPL, not t-mobile stock SPLs)
Okay, I understand what I did wrong, and I understand how I WOULD flash the file you provided using fastboot, except that my computer no longer recognises my phone when I connect it, and as a result I can't access the phone using adb... Not sure what to do next. Would placing that file on the sd card using an sd reader change anything? Or is that what you meant for me to do?
EDIT: Nevermind, I figured out what I was supposed to do with that file, though the problem remains that my computer no longer recognizes my phone when I connect it via USB. Is this hopeless?
EDIT (again) I tried holding camera while powering up, before it didn't do anything but now the phone has booted to a screen with 4 horizontal coloured bars. the screen reads
"DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO- 1.22.12.29
Sep2 2008
Serial0"
Not sure if that means anything but I figure it could. Please advise.
weezerx said:
I looked around on the internet and came across a page that said putting a file called "DREAIMG.nbh" onto the root of my sd card would fix all my problems.
Click to expand...
Click to collapse
That is also how you can flash the rogers 911 nbh from the 0.95.* spl that has no fastboot..
It may fail but it will likely then have 1.33.0010 and the 3.x radio that if you flash it a 2nd time will work.
Once done remove the file from the sdcard
ezterry said:
That is also how you can flash the rogers 911 nbh from the 0.95.* spl that has no fastboot..
It may fail but it will likely then have 1.33.0010 and the 3.x radio that if you flash it a 2nd time will work.
Once done remove the file from the sdcard
Click to expand...
Click to collapse
I really appreciate the help but I'm very new at this and I'm not entirely sure of what it is you're asking me to do
So does that mean all i need to do is remove the G1 image from the sd card and put the rogers one on via an sd reader and I'll be okay?
weezerx said:
So does that mean all i need to do is remove the G1 image from the sd card and put the rogers one on via an sd reader and I'll be okay?
Click to expand...
Click to collapse
And power on while holding camera it ought to ask you if you want to flash it..
Well I followed all of the instructions and removed the bad image from the sd card and put on the one you provided, turned on the phone, attempted to flash it, and got to a screen that says "Update terminate UPDATE FAIL" ... ideas?
Remove sdcard, boot holding camera, tell me all the text at the top of the screen
"DREA210 PVT 32B RUUNBH
HBOOT - 0.95.0000
CPLD - 4
RADIO - 1.22.12.29
Sep2 2008
Serial0"
Interestingly enough, when I boot to that screen now (despite having no sd card in the phone anymore) it still switches to the screen it tried to update with before (light blue background, darker blue text) for a split second before switching back... it never did that before, I'm not sure if that means anything.
Again, I really appreciate all the help though I'm starting to consider sending it to someone for JTAG if we can't find a solution
Hem I think rc29 on a gold card will make your phone into a T-Mobile dream that can be rooted with the telnet method.. remember you will have a 1.x radio so you will not want to directly install danger spl.
The big trick IS unless you have another HTC phone making the goldcard
I'm nt sure what you mean by all of that I tried backing up the fles on the sd card and only putting that nbh file on the card and that didnt work. I tried putting it on with all of the other files that were on it before in place of the other nbh that screwed up the phone in the first place... unsure what to do next. Was i supposed to put the "HTC update" file on the sd card without unzipping it? :S I'm so lost. ezterry, you're from toronto and do jtag service right? cause I'm not too far away...
Okay so scrap everything I said before. I decided to investigate the whole goldcard thing and to me it sounds like it's my best bet. I have a buddy who's willing to let me use his HTC Magic to complete the process. I found a guide online here
http://www.droid-den.com/android-guides/android-guide-how-to-create-a-gold-card
It sounds easy enough to follow, but I have a few questions. First, does the app "GoldCard Helper" still exist, because i know google has taken apps off the market before. Secondly, would you recommend this method/ have any advice or maybe a different way of doing things? and thirdly, just using my friends phone to get the CID for the sd card doesn't pose any threat to it at all, right?
I am trying to flash the ROM on my Touch Pro 2 before I sell it. I am running windows XP on a mac using Parallels 5.0. I have tried running the ROM update when active sync is connected and all starts ok then I get error 226 saying cannot connect. I then tried flashing straight from a newly FAT32 formatted microSD card and that jsut stocks on with a Loading message. So I tried flashing Hardspl, although I think that I have done this before when I still had a pc, but that failed with a connection error too. Any tips/advice anyone?
You need to provide more information. Are you trying to flash a custom ROM, and which one? What ROM are you running now? What version of the phone do you have/what carrier?
If you are still HardSPLed, the second line of text on the bootloader (tri-color) screen will say "OliNex", probably saying "SPL-0.85.Olinex". If it doesn't say this, the SPL is locked, and you won't be able to flash a custom ROM.
If you are trying to flash the stock ROM, I think some people have been having trouble doing so with the phone HardSPLed. But it may depend on what stock ROM. I am able to flash the Euro stock ROM just fine on my HardSPLed phone.
ok, i'll try to answer your request for more info:
trying to flash Energy Rom build 23699.
Existing ROM version is listed as 2.07.401.1 (80303) WME dated 2/4/10.
Phone is an unbadged HTC Touch Pro 2 as sold by Tmobile etc in UK.
Can't see any mention of OliNex on bootloader screen, so perhaps I didn't unlock= it after all. Certainly no T mobile stuff left on the phone now.
??
jbevan said:
ok, i'll try to answer your request for more info:
trying to flash Energy Rom build 23699.
Existing ROM version is listed as 2.07.401.1 (80303) WME dated 2/4/10.
Phone is an unbadged HTC Touch Pro 2 as sold by Tmobile etc in UK.
Can't see any mention of OliNex on bootloader screen, so perhaps I didn't unlock= it after all. Certainly no T mobile stuff left on the phone now.
??
Click to expand...
Click to collapse
Don't know off hand what ROM that you have installed right now. What do the boot screens look like when you start the phone? Also, what does the bottom row of red letters say, when you startup the phone?
If it doesn't say Olinex on the bootloader screen, you are not HardSPLed. Either you never did it, or you relocked it.
Run HardSPL, and you should be able to flash from the SD card no problem.
Redpoint. Thanks for your replies and interest. I have tried to run HardSpl but this fails with a 260 connection error, even though Activsync is synced and connected. Id this to do with running a virtual pc on a mac perhaps?
Your welcome, hope my advice is helpful.
HardSPL is pretty finicky, even on Windows Vista and Windows 7 systems. I think running it on a Mac is difficult or even impossible. You can search the HardSPL thread and see if anyone was able to get it to run on Mac. I'm pretty sure I read different users on that thread mentioning issues with running HardSPL on Mac.
My best advice would be to run HardSPL on a friend's Windows XP system, if possible. It usually runs smoothly on XP, and only takes a couple minutes.
Yes, that confirms my suspicions. I will try it frommy partners windows XP netbook whenshe gets home. Fingers crossed.
Will let you know how I get on and if I need any more help!
Hey guys,
I've searched everywhere but there's no definitive guide to revert to stock from WP7. Pretty much, I tried out WP7 on my dad's HD2, but he didn't like it. So I need to revert it, but there's so much stuff to know that it all gets pretty intimidating.
Anyways,
HTC HD2 w/ Windows Phone 7 (Using aMAGLDR V1.12 - Build: Jan 12 2001, 21:09:22 - by Cotulla 2011 [this ONLY, no other mods present])
Trying to convert back to Windows Phone 6.5
Using Windows XP
Have d/led Windows Active Sync but it won't connect to the PC even when the USB is plugged in. (I'm guessing this is the reason why I can't revert to stock, it won't even connect to the PC)
I've also d/led the latest stock RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship from the forums.
It looks like I have all the resources but my PC won't even recognize the phone being connected to the computer. Must I do anything else besides attempting to flash the stock ROM?
Thanks A LOOOOTTTTT in advance!
I have the Exact same question anybody help please?
It might be you don't have the drivers installed that are needed, your antivirus could be preventing a connection, I had a similar problem where it seemed that it didn't recognize my phone uninstalled sync when into my bootloader it didn't seem to recognize my phone tasked 29 and it went through without a problem
::BUMP::
PLEASE someone help me out, this is getting soo frustrating, I switched to my laptop running Vista and it still won't recognize it.
I d/led Windows Mobile Device Center and it STILL won't work.
Please anyone.
Enter the bootloader screen then plug phone in and wait for it to say USB at the bottom then flash the stock rom from t-mobile
Sent from my FutureShocks HD2 MIUI using XDA App
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
xmoo said:
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
Click to expand...
Click to collapse
dude u been around here long enough, no need for name calling
actually im having the same issue as of today
http://forum.xda-developers.com/showpost.php?p=11418541&postcount=1526
i was able to flash winmo through sd card but 10 different pcs wont see this phone now, from win xp to vista, win 7, mac !
phone works fine in winmo but cant connect, obviously cant flash hspl3 so im stuck on stock winmo, with both spls 2.8 and 2.10 and none of them makes a different
i'll bookmark this and keep following up and if i figure it out i'll update
back to stock LEO
I have same problem i install 2.2 android on my HTC hd2 (t-mobile) and now i can't sync my phone with computer to install stock LEO as well as there is no option on the 2.2 froyo for sd card if any one know how to get back to stock windows 6.5 let me know
I can't find the stock rom on tmobile
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
tmobile stock rom.
Invalid IMEI???
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
webmanny said:
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
Click to expand...
Click to collapse
sure you dont have a desire?
Yes I do I have a Model HTC Desire A8181. It still says HTC HD2, but it says Desire on the phone data screen.
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Will SW upgrade lock my unlocked HD2 to T-Mobile??
Hi
My HD2 from Tmobile is unlocked & am using it in India.
It has SOFTWARE: OS :5.2.21889 (21889.5.0.87), Manila version:2.5.20121412.1
ROM Version :2.10.531.1 (82076) WWE
I am planning to upgrade the ROM to 3.14.531.1.
I read at forum that Post upgrade, my HD2 will default to factory settings. Does it mean that my phone will again be locked to T-mobile?
Pl confirm asap as I don't want a locked phone
Thanks...
no it will never be re locked again, no matter what you do.
Ahh but which one????
samsamuel said:
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Click to expand...
Click to collapse
Ok dude this makes a lot of sense, but which one should I download? Are those version numbers or radio IDs? I don't want to brick my HD2.
Thanks for any help you may give.
those are rom version numbers. go for either 2.10.0 (not .1) or 2.13, or either of the 3.14
dude u have 2 download zune center if u got the wp7 rom thats how u sync the phone
Yes there is a way go to htcpedia.com register with them make your ocunt..and download htc hd2 stuck rom..then put your phone and bootlouder mode..and put the stuck rom you just download..makesure your phone is conecte it at least 50 % of batery no sim car no sd car.
Good luck bro..
sent it from htc hd2 android nexus one custom rom
Okay, so a few years ago I successfully rooted my boyfriend's G1 and swore never again to go anywhere near the process.
However, said phone has now been given to my boyfriend's dad, and he's managed to install a couple of custom roms. In the last week though, he's totally screwed it up. Didn't seem to follow any sort of backing up process, or can even tell me what tutorial he was following to get it in this state.
The phone hangs at the splash screen. I can get into fastboot/hboot but there are only a few options available.
SPL is 1.33.0006 which I can gather is bad from my reading.
Hboot info is:
Dream PVT 32B Ship S-on
Hboot - 1.33.0006 (Dream11000)
CPLD-4
Radio-2.22.19.261
I have tried:
Initially I just tried going into recovery mode (I think that's what it's called - home & power) and wiping the data to see if that stopped the screen hanging. It didn't.
Putting rc7 dreamimg.nbh on the phone and loading via hboot/fastboot. When I do this it fails saying 'Main version is older.'
After doing some searching, I see someone mentioned this would mean you need to use the goldcard method. I vaguely remember having to do this a few years back on the phone when I rooted it the first time.
I go through the process, following an unlockr tutorial (can't post the link - sorry).
However, I get the same response through fastboot - 'main version is older'.
At this point I decided to try flashing a recovery image via the adb. Go through the process of installing everything etc. but when it came to installing the usb drivers for the phone, it failed although it did install the htc bootloader. I checked using adb devices command to see if it was picking anything up and it was however, when I go into the command prompt and try to do anything I just get a <remote: not allow> message.
It's only after I look for <remote: not allow> message error that I understand that 1.33.0006 is a 'perfect' SPL, and explains why I can't really do anything.
I really didn't want to resort to forum posting (one of the reasons I swore never to go near the G1 again after rooting was because I *know* I'm not tech savvy enough to be messing around with this stuff), but after spending around 6 hours over two days on this I'm absolutely stumped. The problem is, I'm stubborn so I hate to give up after spending so much time on the stupid thing (bye bye flexi day), so if anyone has any suggestions, or if they could just tell me it's a lost cause then it might help.
Thanks for your time...
do you have the UK version of phone or the US version?
can you get into recovery?
Sorry, it's the UK version - I can get into recovery (if that's home and power ?) I think. Thanks.
What nbh file was flashed prior to this? (almost sounds like the states someone was in after flashing the sappimg on a dream with 1.33.0013d..
Well first thing is to make a gold card if you don't already have one.. Then we can try one of two things. (you can make it on another phone, its a property of the sd card not the phone)
1) (may have the same main version is older problem but easy if it works) place the Orange nbh:
orange-1.58.73.2.nbh (MD5: aca4dee0c1ece7e9773f2ecbdfbba7c0)
onto the root of the goldcard named DREAIMG.nbh
If this works (or at least flashes the s=off SPL) you are in the clear simply use fastboot to re-install the 2708+ recovery/radio/spl then install a rom as per here
2) If option 1 failed... well this is an annoying process.. and risky if you take shortcuts so don't ..
A -- This time put the rogers e911 patched nbh rogers_1.89.631.1.nbh MD5:25bfcc329679e4869b3d65f673e463ac
onto the root of the goldcard named DREAIMG.nbh
This is the larges "main version number" in an official nbh for the Dream we have.
If that fails to flash (try again) if it still fails.. well I'm not sure what to do if both boot/recovery are failing (short of jtag anyway)
B -- If it succeeded you now (despite any labels on your phone) have a rogers dream.. (I mention this because working with an ebi1 radio is a bit different than the ebi0 and you don't want to brick your phone)
Ok next step is re-root: http://forum.xda-developers.com/wiki/index.php?title=Rooting_HTC_Branded_EBI1_Dreams
(Sections A-D inclusive)
C -- Before installing a rom.. now that an eng SPL is installed you can use fastboot (and only fastboot with the 3.22 radio) to install the 2708 radio and thus have a more commonly supported system:
per Follow this 2708+ install
remember do not install a 2.22 radio via recovery while a 3.22 radio is installed you will brick your phone
--
Best of luck.. really sounds like something happened that ought not have.
Thank you!
Option 1 didn't work - I still got the 'main title is older' message.
However, option 2 (after a small wobble) worked! First time I tried it, it failed stating 'partition update fail!' but after a reboot (which showed the rogers logo - a change from before) and a retry, it worked! I followed the rest of the provided instructions and installed the BIFFMOD V2.1-EZTerry 2708 port and all is well!
Thank you so much again for your help, it really is appreciated. I would not have been able to do this without your help - I've sent a small donation through as a token of thanks.
I've learnt more about G1s than I ever wanted to know, but thanks to you (and the information provided by the XDA community) it wasn't all wasted time!
After looking through the varying questions concerning the same topic and, subsequently, not seeing the right answers - within the right timeframe (e.g. within the past month or so), I decided that a new thread was needed. So here's it is:
A branded G1 (mine, T-mobile, Germany) is what I want to downgrade so that it may be rooted and upgraded with a custom ROM. The problem, I am finding, is not that the instructions aren't correct. Rather, it's that a piece of the instruction set doesn't exist. Namely, the revskills.de website. I mention this because I have tried, repeatedly, to boot with the DREAIMG.nbh in order to downgrade and have consisitently (after numerous downloads from different sites) received the same error - 00028002 (or something like that) while trying to load it. I eventually learned that some phones needed a "goldcard" so I set about trying to do that. Got the CID, reversed it, etc. but the part about going to psas.revskills.de is the killer. The site is down and apparently, no other method of changing the carrier ID exists (or, if it does, the method is too ugly to mention, let alone comprehensible by someone like me, a not-so-good-programmer). Worse yet, all the instructions involving the generation of a goldcard also involve this website and consequently, because of the aforementioned down-status of the site, renders all instructions moot (Grade: D for relying on unreliable sources). So, back to the question: does a method exist outside of what I have mentioned? Where can I find it? Does it have a cost attached to it?
If you've read this far it means that full words and sentences don't confuse you (in light of so-called "l337sp33k") and I applaud you. I will applaud you even more when a well thought out and not-so-glib answer unriddled with blog cliches and platitudes can be found as a reply to this post...
Seriously, if you don't know an answer, a link to check out or someone I can refer to, don't waste your time (or mine) with a the standard "you need to read this and that rules before asking a question" reply. I have trolled through this forum and a few others for the past 2 days looking for the answers to the question of downgrading and finding not the right answers that are specific to this problem (yes, I've read thropugh cyanogenmod wiki, read through the wiki here for dream/g1 phones, gsm programmer's sites, android dedicated sites, etc...ALL of them point to revskills for the goldcard gen (except for one which allows dowloading a perl prog to compile yourself to make the goldcard - I'm not so good with perl yet)
If you need to check the website go here:
psas.revskills.de/?q=goldcard
it's not working for me, whether through proxies in the US, netherlands, britain, frnace, or germany. My only conclusion is that it has been shut down.
Thanks for you attention and I really appreciate some advice from one of you that may be able to shed more light on this.
Incidentally:
SD Card: Hama 2GB Micro SD(formatted fat32)
Droid/HTC G1 phone has been factory reset to:
Firmware: 1.6
Kernel: 2.6.29-00479-g3c7df37 [email protected] #19
Baseband ver.: 62.50S.20.17U_2.22.19.26I
Build No.: DRC 92
are you going on that non exiatent site to download the qmat thing? maybe try looking for it as a torrent file... use bittorrent or something and see if it's out there... i wish i knew how to help more, but i never needed to do anything like that...
stupid question but did you try both dreaimg files? rc29 and rc7?
both img files
Yes, I tried both. The US version gave me the same response as the European one. Tried qmat 5.0.2 and got nowhere with it (i ran out of time before I could figure out everything it could do - apart from simply reversing the cid). The only way to create a gold card seems to be through revskills...kind of a raw deal for the rest of us, if you ask me.
yeahh haha this sucks im not sure what you can do... hopefully someone sees this who can help you. sorry
I am currently trying out the alternate root method from your guide. Something's working...the build version is now CRB43 and I have cupcake (1.5) installed - I think. I shoudl be able to go through the guide in order now, right?
yeah if you have 1.5 than all you need is a custom recovery installed and you have root access... i prefer amonra recovery.. than you can flash radio and spl and go even further by flashing the newer 2825 radio and 0013d hboot
I just have to update my phone account with a data plan (forgot I didnt have one and cant sign in to google without it). Fortunately, it's cheap and takes only a day to update.
OK, so i worked the alt recovery method, but I can't sign in to google. (I used the AMON_RA recovery img.) I can't do anything now. The phone is (for all intents and purposes, bricked. I then tried to do the work around to get the wireless turned on at the touch me screen. It doesn't work. Still no root access. trying to go back to stock rom, no go. Still get the "Not Allow" 00028002 error. Haven't seen the fast boot screen lately. I try the back arrow from the boot loader screen...nothing. Even went so far as to try the HTC site boot unlocker method. HTC Sync installed, android sdk installed, etc. got the drivers in win7 x64 to acknowledge the phone being plugged in...it even recognozed (once) as the HTC Dream/G1, after that never again. This is nuts! It's funny as well as highly annoying. I'm running out of ideas and could use some suggestions...
Thanks
incidentally, the link to "DREAIMG.nbh" in the unrooting section connects to a download of the update.zip file. So, the link is misplaced or something...
good news, the gold card gen sit is back up, however, I can't connect to the phone with adb...I have tried the workaround but I guess the image on this thing is still not rooted. I'm out of ideas what to do, I cannot sign in to google (registration work around) and I can't connect with adb to all the other work to change things. This phone is hosed (and I will absolutely not go to T-mobile (in germany) they're even worse here than in the US...
Here is the link that I found for dreaming.nbh file.
http://www.megaupload.com/?d=NAAS5VBS
See if that works.
So, I am resigning myself to never getting this fixed. I have a rom I cannot access because the data plan on my sim card is for Maxxim, while the rom sets everything up as T-Mobile. Maxxim support will not give out the APN info and, to top it off, the wireless work around does not work because the cupcake dreaimg.nbh and amon_ra recovery image still do not allow root access. I'm lost, got a "working brick" phone, and I'll be damned if I go crawling back to t-mobile whether here in Europe or the US! Thanks for the help anyway...
yeah sorry bout that will fix the link, but its the same one you use to 'downgrade' on the Root method.. just brings you to 1.0, then flash the update.zip to 1.5 or 1.6...
so you cant flash the DREAIMG.nbh file? and you cant do anything via recovery?
but your device works if you had a data plan.. lol wow all i can think of is trying to flash the orange.nbh or get the DREAIMG.nbh to work..
Yeah, tried the orange.nbh as well and I get the same error for every nbh I try:
"00028002 Not Allow". It's really weird that all the nbh do not work...it's almost deliberate. The only root that worked was the alternate root, but wouldn't that have let me flash other roms? Interesting that it didn't.
Good that this G1 is a spare, but I would still like to get it working. I've found a use for it at work but it needs to be rooted. Will post back shortly with results from the DREAIMG.nbh and orange.nbh (if need be).
Incidentally:
Bootloader screen:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
SEP 2 2008
Does this give you any ideas? I can get to the recovery console but it does not necessarily mean I have root (as far as I've seen to this point). I mean, if I were able to register the phone without a data plan (using the wireless connection) I think I would be ok. I did have a point when I was able to connect to the phone via adb (but the phone was registered).
I know I don't have root because I am unable to do the <enter>reboot<enter> thing in the reg bypass method. How did that happen? -I've got no idea...
Another thought, Is there another way to install drivers on my windows machine so that the phone is recognised by adb (even though it's not regitered and I have no way of turning on debugging)? Is there a way to alter the build manifest so that USB debugging is on by default thereby allowing me to connect via windows?
Its painful to read threads like this..
Do you still have your sdcards CID from the OP?
If so using the sdcard you have the CID to make the goldcard on your computer, tben takethe orange nbh rename it to DREAIMG.nbh and place it onthe root of the sdcard.
Then flash the orage nbh and use fastboot to install the 2708+ radio/spl/custom recovery (ra or clockwork)
If you dont have the CID find a device (likely a friends phone) that can read the CID and pick up from there. (notice no adb, and only fastboot after flashing an nbh with an engenering spl)
(I didn'tsay it earlier as the goldcard site was down...)
How to I go about reading the CID on another phone? I am not too familiar with the process. I have a nokia X2. Will that work through a bluetooth connection? (it's my wife's phone and I don't want to try anything with that one until I am absolutely sure.
If you could point me at something I could read on how to do this, I would be exteremely grateful...
Thanks
the site http://psas.revskills.de/?q=goldcard is odwn for me, so I can´t create my gold card.
Any other way to access the site?
I'm following the CM guide for my inspore 4g, but when I searched this forum, this thread came up
So here's my final result:
* Followed steps in the guide for alt root method (nothing else worked but that) - gained root.
* Restarted in order to follow thorugh with the radio upgrade
* No root
* Reflash the ROM
* still no root
* Cannot connect adb to device
* Windows sees it only as USB (even after uninstalling and pointing the hardware to the Android SDK USB Drivers
So I've come into an infinite loop:
* Can't gain root without a goldcard (or some ability to take the NBH apart and modify the kernel - DEFINITELY not my strongest skill...
* Can't get a goldcard without being able to read the CID
* Can't read the CID without connecting with adb
* Can't connect with adb without USB Debugging on
* Can't turn on usb debugging without a) registering phone (no data plan) or b) having root access to type in the commands at reg screen (with SIM Card in) or initial screen (without SIM card)
I've tried every ROM I could find, used the Android Kitchen tool (to modify the ROMs I've found, adding root access), I've read every guide I could get my hands on, as well as trying to extract the nb files from the NBH (in hopes of spotting what I needed to change in order to enable the phone to come on with wireless ON). I have been unsucessful. Is the phone now a paperweight?
I appreciate and respect any suggestions (I've already thought of buying a new phone - so that suggestion is out ;-) ).
Thanks