Very good health... I have a question a little Be interested.... I want to know when will the official rom for dell streak7 wifi honeycomb ... thank you very much and I hope you can help me with the answer... sorry if this would translate poorly translated with google translate because my English is not very good
Googling
If you google it - it should be around September but don't hold your breath since its coming from Dell....I would recommend you install DJ Steve's home brewed Honeycomb....its da bomb!
Donmotobike said:
If you google it - it should be around September but don't hold your breath since its coming from Dell....I would recommend you install DJ Steve's home brewed Honeycomb....its da bomb!
Click to expand...
Click to collapse
I'm with Donmotobike on this. Honeystreak is easily one of the best Honeycomb ports for any device.
I still want official Honeycomb - for the sake of having it - but Honeystreak is incredible. If Dell doesn't release Honeycomb, though, I'm not buying the Streak 10 or any other tablet Dell makes - we can't always be sure that the community will develop anything good for them, so we need to hope that Dell provides updates.
What we needed was another "When will Honeycomb be released" thread.......
mmm ... thanks for your answers ... by my side I have to wait until September to see what Dell brings new... thanks for all...
joined 2009 only posted 4? interesting
You dont say much....honeycomb must be important to you...do you know how turn off dell streak? can you tell me because i forgot
If the way you think .... There are 2 ways to turn off the dell ... one is the power button and another is the button that is next to where you put the microsd memory is to resetiarlo forced or shutting it down ... I hope this information can help you ...
Yes and no
wilsonrpm said:
If the way you think .... There are 2 ways to turn off the dell ... one is the power button and another is the button that is next to where you put the microsd memory is to resetiarlo forced or shutting it down ... I hope this information can help you ...
Click to expand...
Click to collapse
Powering down on/off button okay...reset button does not turn off your device it resets your device and powers on....
Donmotobike said:
Powering down on/off button okay...reset button does not turn off your device it resets your device and powers on....
Click to expand...
Click to collapse
That's odd....... mine shuts off without turning back on when I press the pinhole reset button....... I have to physically press and hold the power button to boot.
And PS:
I'm not a Dev per se but I am no novice either....... helped many a people here on xda with issues (kyocera m6000 most recently working with spz0 on openzio )
It could be that some devices act differently and are from different batches. Don't be so fast to toss out your opinion and then roll your eyes...... its rude.
The pinhole button is a force power off button, not a reset button. It's in the manual.
chamberc said:
The pinhole button is a force power off button, not a reset button. It's in the manual.
Click to expand...
Click to collapse
/cheer
I never looked at the manual
Please KEEP ALL posts on Topic
If you do not have anything Constructive to Say then please do not post
Taking the Mick out of someone asking a Question is not Beneficial to any body or this Post
Thank you.
pyraxiate said:
/cheer
I never looked at the manual
Click to expand...
Click to collapse
You got a manual? Wow. I didn't get one.
The manual is on the internal memory.
rvbarton said:
You got a manual? Wow. I didn't get one.
Click to expand...
Click to collapse
Sent from my Streak 7 rocking the Streakdroid7 ROM
Related
Does someone of you guys know how to put X2 into flash mode? The X1-way (pushing volume-down-button and Power Button at the same time) unfortunately does not work...
you got a x2!? :O
Erm - yes
What are you trying to flash..?
i think he wants to get to bootloader. Try this:
Enter the bootloader mode by holding the reset button down for longer than five seconds, until you see the red LED below the reset button
illuminate (at which point the yellow, programming-mode LED will turn off).
Click to expand...
Click to collapse
make before trying to flash it you should try backup the rom and then upload it somewhere and post it here for cookers...First help to get helped....
Because this is a very new phone not cookers yet as no base rom to cook with....
Cheeers
I thought the X2 is not yet on the market?
And before you flash, please give us a small review of the phone:
- which ROM you're using (final?)
- how does the ROM work
- performance
- photos quality
so on...
Please.
http://www.youtube.com/watch?v=JX-2BXN2RPU
looks like my x1 working better
My money is on - OP IS A TROLL! Lol at everyone who took the bait.
OP if you are not a troll - post pics!
What is OP?
mbernstein said:
What is OP?
Click to expand...
Click to collapse
OP = Opening Post or Opening Poster. In this case the latter one.
matejdro said:
i think he wants to get to bootloader. Try this:
Quote:
Enter the bootloader mode by holding the reset button down for longer than five seconds, until you see the red LED below the reset button
illuminate (at which point the yellow, programming-mode LED will turn off).
Click to expand...
Click to collapse
Thanks, unfortunately this doesn't work, the X2 just resets...
What I want to achieve is that the phone gets into the mode where I can flash it - i.e. the mode in which the X1 shows the stripes on the screen.
@orelsi: How much money is in your pot?
no one knows how to get it to the bootloader screen as no one has the phone yet.
if u do have the phone, post some pics or vids
I'm aware that the phone is not publicly available yet. But that doesn't mean that no one has it yet - my hope was that there is someone of you expert guys who has it already too.
I have definitely other things to do than trolling around in boards, so - I'll keep my before mentioned hopes up.
indianl said:
I'm aware that the phone is not publicly available yet. But that doesn't mean that no one has it yet - my hope was that there is someone of you expert guys who has it already too.
I have definitely other things to do than trolling around in boards, so - I'll keep my before mentioned hopes up.
Click to expand...
Click to collapse
So be nice, and contribute here as people suggested above, even if no one has your answer yet...
indianl said:
Erm - yes
Click to expand...
Click to collapse
Could you please provide a video with highest resolution posssible ??
i still havent found a video sample around
indianl said:
Erm - yes
Click to expand...
Click to collapse
Could you please provide a video with highest resolution possible ??
i still havent found a video sample around
obvious trolling is obvious.
/fail
Holy moly...
http://img62.imageshack.us/img62/9143/pic9432.jpg
http://img180.imageshack.us/img180/380/pic9474.jpg
Now, is there anyone that can contribute something *real*?
I am not trying to troll, but I am genuinely curious.
I've played with a NC at B&N and it seems like a pretty sweet little tablet for the money, but how is this thing gonna run a custom build of android if it only has one button on the front?
Has anybody been able to make a version of android that works with a single button?
Check the forums here.....now that this is rooted, a bunch of us are already running a wide array of apps with no issues.
oRAirwolf said:
I am not trying to troll, but I am genuinely curious.
I've played with a NC at B&N and it seems like a pretty sweet little tablet for the money, but how is this thing gonna run a custom build of android if it only has one button on the front?
Has anybody been able to make a version of android that works with a single button?
Click to expand...
Click to collapse
The other soft buttons are screen the bottom of the screen in all non full screen apps. Works quite well actually.
Nice!
I've already got an ipad, but I'd buy one of these just to fool with if it gets enough support on here.
Now you can remap the vol + and vol - to back and menu.
oRAirwolf said:
Nice!
I've already got an ipad, but I'd buy one of these just to fool with if it gets enough support on here.
Click to expand...
Click to collapse
I'll be quite honest, IMO this is one of the best Android Tablets out right now. It by far has the best screen in class. There will be support
The single button issue has been overcome in this post:
http://forum.xda-developers.com/showpost.php?p=9556837&postcount=1
jasoraso said:
The single button issue has been overcome in this post:
http://forum.xda-developers.com/showpost.php?p=9556837&postcount=1
Click to expand...
Click to collapse
Then what about adjusting the volume? Can't software buttons be implemented like on the Archos 70?
Ok, so i have the MyTouch 3G and I gave my younger brother my old G1. He decided to try and mod (root) the g1. Now, its stuck on the g1 loading screen, and he has no idea what he did. Instead of buying him a new phone for Christmas, i was thinking of trying to unbrick this phone.
Sorry if i gave little detail, he didn't really give me much to work off of.
Thanks, Merry christmas yo!
Can you get into "fastboot" mode?
Hold the Camera Button and push the power button... DO NOT let go of the camera button during this process... In less than 30 seconds, if it's not perma-bricked, it should take you into the fastboot mode.
Lemme know
tribalartgod said:
Can you get into "fastboot" mode?
Hold the Camera Button and push the power button... DO NOT let go of the camera button during this process... In less than 30 seconds, if it's not perma-bricked, it should take you into the fastboot mode.
Lemme know
Click to expand...
Click to collapse
Ahh, tried it. Still nothing. So its perma bricked?
thanks for the response btw
MasonGL said:
Ahh, tried it. Still nothing. So its perma bricked?
thanks for the response btw
Click to expand...
Click to collapse
No fastboot after holding camer+power means it's bricked, JTAG or replacing the logic board is the only way to go.
Same problem, no recovery mode or fastboot possible
Hi, I'm having the same problem, can't get into recovery mode nor fastboot, is there any way of unbricking it or should I just sent it in for repair?
Grateful for any help!
therightpers said:
Hi, I'm having the same problem, can't get into recovery mode nor fastboot, is there any way of unbricking it or should I just sent it in for repair?
Grateful for any help!
Click to expand...
Click to collapse
what did you do to the phone to cause this? did you flash any radios? in order to resolve a problem we need to know a lot more than this.
not to you in general just thinking aloud -- It pisses me off to no end that the word "brick" is so horribly used -- its like pregnancy... you cannot be a "little" or "semi" or "perma-semi-little" bricked. Either you are or you arent!
MasonGL said:
Ok, so i have the MyTouch 3G and I gave my younger brother my old G1. He decided to try and mod (root) the g1. Now, its stuck on the g1 loading screen, and he has no idea what he did. Instead of buying him a new phone for Christmas, i was thinking of trying to unbrick this phone.
Sorry if i gave little detail, he didn't really give me much to work off of.
Click to expand...
Click to collapse
you need to take the little man aside and chain him to a chair with hot bright lights in his face and threaten to cut off his xbox or whatever and make him remember exactly what he did. Find his downloads, find out what instructions he was following,
it amazes me how someone can still brick the G1 despire all the killer wiki's floating all over the place...
MasonGL said:
Ahh, tried it. Still nothing. So its perma bricked?
thanks for the response btw
Click to expand...
Click to collapse
Yes? but you can use jtag. Do not worry? jtag wrigler cable assembly is very simple.
I have a captivate (UCJH7)...
i flashed a few different roms then i flashed back to stock using 'I897UCJF6-final-OCD-REV0.exe'.. then it stopped going into download/recovery.Then i udated to 2.2 using kies. Then i wanted to flash cognition so i used adb to went to download mode. i flashed the speedmod kernel using odin and it rebooted and then "PHONE ! COMPUTER" symbol..
I cannot boot..
All i see is the phone ! comp symbol
I used 3 button combo,
tried removing everyting and holdin vol up+down then putting the battery
Odin doesnt recognize the phone and adb doesnt list any connected device
DOES THIS MEAN ITS OVER.. is it permanant brick?
or is there anything i can do???
everything i did uptill now was with the forums help so maybe somone has a solution
Thanx in advance
pruth93 said:
I have a captivate (UCJH7)...
i flashed a few different roms then i flashed back to stock using 'I897UCJF6-final-OCD-REV0.exe'.. then it stopped going into download/recovery.Then i udated to 2.2 using kies. Then i wanted to flash cognition so i used adb to went to download mode. i flashed the speedmod kernel using odin and it rebooted and then "PHONE ! COMPUTER" symbol..
I cannot boot..
All i see is the phone ! comp symbol
I used 3 button combo,
tried removing everyting and holdin vol up+down then putting the battery
Odin doesnt recognize the phone and adb doesnt list any connected device
DOES THIS MEAN ITS OVER.. is it permanant brick?
or is there anything i can do???
everything i did uptill now was with the forums help so maybe somone has a solution
Thanx in advance
Click to expand...
Click to collapse
Remove Battery insert usb cable hold vol up/down power put in batt release power button only keep holding vol up/down should go right in to download mode. I've done this many a time.
o/` Search the forums, buy a jig, doo-dah doo-dah,
People create threads about this exact problem, all the live long day o/`
if you get it up and going with the above meathod (should work) then definately use the 3-button fix next time. only once though because flashing bootloaders can be dangerous. once the recovery mode is working with button combo then flash speedmod (as long as the rom you want is on the sd card) or flash 2.2 then speedmod so the phone will be bootable.
also i'd redownload speedmod if you want to start over. could have been a bad download. also could have been a windows problem or a bad cable. hope you get it working.
hedgehogmd said:
Remove Battery insert usb cable hold vol up/down power put in batt release power button only keep holding vol up/down should go right in to download mode. I've done this many a time.
Click to expand...
Click to collapse
thnx for the quick reply...
Tried it but it doesnt work
Thank u guys for the support...
None of the methods r working..
I did spent a lot of time searching the forum b4 posting.. no luck
I ll try the jig but i dont want to cut the original usb that came with my capptivate so will se what i can get
pruth93 said:
Thank u guys for the support...
None of the methods r working..
I did spent a lot of time searching the forum b4 posting.. no luck
I ll try the jig but i dont want to cut the original usb that came with my capptivate so will se what i can get
Click to expand...
Click to collapse
Then purchase one or make your own. There's no need to cut up a cable.
Jig + Cappy = Eternal Life
pruth93 said:
Thank u guys for the support...
None of the methods r working..
I did spent a lot of time searching the forum b4 posting.. no luck
I ll try the jig but i dont want to cut the original usb that came with my capptivate so will se what i can get
Click to expand...
Click to collapse
I bought a jig from a well respected member here for $8. I have not had to use it yet (thank God!) but it is pretty cheap insurance!
I gat my self 1 and I place under my pyllow so I can sleep well
Sent from my GT-I9000 using XDA Premium App
I had this same thing one where no button combo worked to get into download mode. Turns out that i needed to restart my computer. who would have thought.
Pheww! I was out of hopes and was definitely going to buy the jig but just to see what happens if I pressed and hold the 3 buttons I long pressed them and the symbol disappeared and then came back then disappeared again then i left the buttons cuz I thought ill definitely need a jig so I let the buttons go and BAM! I was in download mode and I flashed serendipity
Thanx for all the quick replies...
Moral of the story - galaxy s phones are unbrickable
Sent from my SAMSUNG-SGH-I897 using XDA App
you can buy a jig here just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...84198&ssPageName=STRK:MESELX:IT#ht_623wt_1139
pruth93 said:
Pheww! I was out of hopes and was definitely going to buy the jig but just to see what happens if I pressed and hold the 3 buttons I long pressed them and the symbol disappeared and then came back then disappeared again then i left the buttons cuz I thought ill definitely need a jig so I let the buttons go and BAM! I was in download mode and I flashed serendipity
Thanx for all the quick replies...
Moral of the story - galaxy s phones are unbrickable
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Not unbrickable, just harder then most phones to brick.
miztaken1312 said:
Not unbrickable, just harder then most phones to brick.
Click to expand...
Click to collapse
And if it were to brick... it would definitely be the sexiest paper weight EVAR.
Twicebak3d said:
And if it were to brick... it would definitely be the sexiest paper weight EVAR.
Click to expand...
Click to collapse
So true
Your welcome
Now you say/press thanks
Teaching manners one person at a time
If your able to save 8 dollars buy a jig so you font have to mess with trying to get to download mode again.. My jig had saved me numerous times and I.only.bought one cause I had the same situation as you.. Jigs are worth it.
Sent from my SAMSUNG-SGH-I897 using XDA App
I am on ROM number 3 and have yet to run into any problems, but will be trading an extended life i9000 battery to a friend who has 2 jigs. The batt was sent to me by mistake, and is being replaced without me having to send back (not worth the shipping cost to the seller), so that works out for both of us.
.. And yes, it will turn my cappy into a camel, but I'm ok with that.
Sent from my awesome Captivate i896 on Cognition 4.3.
tupirujp said:
I gat my self 1 and I place under my pyllow so I can sleep well
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
lolol - You should stick that in your sig
the jig will help you:
http://cgi.ebay.com/ws/eBayISAPI.dl...84198&ssPageName=STRK:MESELX:IT#ht_623wt_1139
I'm sure there must be a number of peope who know about this, but i accidentally bumped into this today and thought i would let others know.
In order to take Screenshots the easy way:
On the HTC Incredible Hold the Power Button, and before the power menu pops up, press the Home Key.. a screenshot is taken and is saved in a folder calld screenshots.
This Happens on the HTC Incredible S with ICS 4.0.4. I am not sure if this also happens on the other variants of android on HTC Inc S.
Nav
nvnran said:
I'm sure there must be a number of peope who know about this, but i accidentally bumped into this today and thought i would let others know.
In order to take Screenshots the easy way:
On the HTC Incredible Hold the Power Button, and before the power menu pops up, press the Home Key.. a screenshot is taken and is saved in a folder calld screenshots.
This Happens on the HTC Incredible S with ICS 4.0.4. I am not sure if this also happens on the other variants of android on HTC Inc S.
Nav
Click to expand...
Click to collapse
im gunna trace you ip and come steal your galaxy s3. thanks
naathaanb96 said:
im gunna trace you ip and come steal your galaxy s3. thanks
Click to expand...
Click to collapse
Why do you want to steal it Bro.... I'll give it to you...
nvnran said:
Why do you want to steal it Bro.... I'll give it to you...
Click to expand...
Click to collapse
really ;o!
wow!!! thanks so much! So helpful and I didnt know!!!
Why is this not more well known? I've been desperate trying to find a screenshot thingy, while it's been implemented the whole time! Thank you.
Hey op maybe add to the post that on aosp and every ICS ROM you hold volume down and power at the same time for screenshot. And on jb too
Sent from my Incredible S using xda premium