Working/Workable GPS files!!! - Vibrant Android Development

These are the latest files piulled from the Vibrant 4G 2.3.4 build. Whether they are different than the ones posted by birgertime or brick'd (don't remember who really) some time back I don't know. I do know that the ones previously posted were from the original 2.3.3 leak for the 4G and these as stated are from the 2.3.4 leak.
I have tested these (very limited thus far) and they do work as expected. Same deal with turning GPS off you will need to reboot. These may or may not improve GPS you tell me.
You may flash this as anything else. It does wipe dalvic so your first boot will take slightly longer.

Im gonna give them a go and see what happens never was able to get a lock with the others. I will report back after some testing.
Sent from my GT-I9000 using xda premium

kwes1020 said:
Im gonna give them a go and see what happens never was able to get a lock with the others. I will report back after some testing.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I just tested outside and had 8 locks under 2 minutes with 8m accuracy.
Sent from my SGH-T959 using xda premium

Flashing with CWM 4+
Guys, how do I flash this with CWM 4.0.1.0?

happybabyhippo said:
Guys, how do I flash this with CWM 4.0.1.0?
Click to expand...
Click to collapse
CWM yes. All of the Samsung GB roms are still using CWM2.5 and the script is set for that. If it fails to flash you'll either have to repackage it for CWM 4 or push the files manually or through adb.
Sent from my SGH-T959 using xda premium

explodingboy70 said:
I have tested these (very limited thus far) and they do work as expected. Same deal with turning GPS off you will need to reboot. These may or may not improve GPS you tell me.
You may flash this as anything else. It does wipe dalvic so your first boot will take slightly longer.
Click to expand...
Click to collapse
hmm didn't work.
"--Installing: /sdcard/vibrant_gps_files_2.3.4.zip
finding update package...
opening update package...
installing update...
amend scripting (update-script) is no longer supported.
amend scripting was depreciated by Google in android 1.5.
it was necessary to remove it when upgrading to the clockwork mod 3.0 gingerbread based recovery.
please switch to edify scripting (updater-script and update-binary) to create working update zip packages.
installation aborted "
help!

RoxAbout said:
hmm didn't work.
"--Installing: /sdcard/vibrant_gps_files_2.3.4.zip
finding update package...
opening update package...
installing update...
amend scripting (update-script) is no longer supported.
amend scripting was depreciated by Google in android 1.5.
it was necessary to remove it when upgrading to the clockwork mod 3.0 gingerbread based recovery.
please switch to edify scripting (updater-script and update-binary) to create working update zip packages.
installation aborted "
help!
Click to expand...
Click to collapse
The recovery is to new for this flashable. Unzip tje contents of the zip and use adb or root explorer to move the files manually. Then boot recovery and fix permissions.

After some testing. I think this works better then the previous fix for me. As soon as I open up GPS test or gpsaids I get 13 in view. Step outside hit 9 locks in about 2-3 minutes. 2.3.3 files I could never get a lock at all.
Thanks for posting these.
Sent from my GT-I9000 using xda premium

Downloaded and installed.
Will report back later because now it's 2:30 and I'm on my PJs so no going outside now.

Downloaded and installed will report back after testing. Hope this works since the compass in revolution is backwards and I don't get any locks
Sent from my Revolution JVQ Vibrant 3g with Bullet oc 1.2 Ghz

DarkRaven66 said:
Downloaded and installed will report back after testing. Hope this works since the compass in revolution is backwards and I don't get any locks
Sent from my Revolution JVQ Vibrant 3g with Bullet oc 1.2 Ghz
Click to expand...
Click to collapse
I doubt it will fix the compass. If I'm not mistaken that needs to be fixed in the kernel.
Sent from my SGH-T959 using xda premium

Using latest MIUI and this is the best working gps/compass solution so far! Immediately after opening gps status I get 12 birds in view and locks on 7 seconds later. This is indoors! Also, this is the first time that my compass was actually usable! Will report later on longevity of the fix. Thanks.

reocej said:
Using latest MIUI and this is the best working gps/compass solution so far! Immediately after opening gps status I get 12 birds in view and locks on 7 seconds later. This is indoors! Also, this is the first time that my compass was actually usable! Will report later on longevity of the fix. Thanks.
Click to expand...
Click to collapse
Limited Edition?? can you check if it still works if you turn gps off and back on.. if so well have a 100% functional gps !!!!!!!!!!!

explodingboy70 said:
I doubt it will fix the compass. If I'm not mistaken that needs to be fixed in the kernel.
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
All I have to say is that before this fix the MIUI compass app was useless on my phone. Did not even spin at all! Now it works perfectly.

Can someone make a cwm4 compatible zip of this? If they don't mind of course...
Sent from my SGH-T959 using XDA App

bounikariel said:
Limited Edition?? can you check if it still works if you turn gps off and back on.. if so well have a 100% functional gps !!!!!!!!!!!
Click to expand...
Click to collapse
Yes I'm on Limited Edition. And I'll check for on/off functionality for you. Will post in a sec.
Update!! On/off functionality seems to work very well!!! I turned off gps and deleted gps data and cleared agps data! Turned gps back on and it still functions well! This may be the fix we've been waiting for folks. Getting 16ft accuracy indoors!!!

Please, somebody to repack this in CWM 4? Flashing with CM7 is tedious and not comfortable.
Enviado desde mi SGH-T959 usando Tapatalk

reocej said:
Yes I'm on Limited Edition. And I'll check for on/off functionality for you. Will post in a sec.
Update!! On/off functionality seems to work very well!!! I turned off gps and deleted gps data and cleared agps data! Turned gps back on and it still functions well! This may be the fix we've been waiting for folks. Getting 16ft accuracy indoors!!!
Click to expand...
Click to collapse
sweeeeeeeeeeeeeetttt

How can I flash this one with the CWM Recovery 4? I copied the files (root), wiped dalvik cache and fixed permissions, but the GPS refuses to even start! It doesn't blink

SuperJMN said:
How can I flash this one with the CWM Recovery 4? I copied the files (root), wiped dalvik cache and fixed permissions, but the GPS refuses to even start! It doesn't blink
Click to expand...
Click to collapse
I would say since these files where pulled from a twiz build that they would need to be altered or reworked to work with a CM7 build..
And also there is no reason to ask for something more than once ( CWM 4 support) it doesn't get you anywhere. If this ends up being better for CM7 it will be added..
Flashed on SH 5.1 and honestly I had great GPS with that rom anyways but it seems to be working fine, used Navigation this morning with success.

Related

[ROM][9/18][GT-P31XX][JB][4.1.1]Stock_Rooted_Deodex_Zipalign

By RomsWell
Jelly Bean 4.1.1
P3113 Base: P3113UECLI4 (Can Be Flashed To The 3110) (This is the Latest Leak for the 3113)
P3100 Base: P3100DDBLI1 I Do Not Own This Device
Updating SuperSU binary is FIXED in these builds, and is currently running the latest.
This is a mostly stock version of the OTA. With a some of the more basic features added.
De-Odex
Zip Align
Rooted
init.d Support
Bash
BusyBox
Adding apps before flashing
If you open the ROM.zip with 7zip or winrar you can drop apks in the data/app folder in the zip and it will auto install the apps on first boot.
Not Working
Mic Works Just Not Google Voice Search
Auto Brightness Has Issues
IR Blaster is FIXED!!!!!!!!!!!!!!!!!!!
Install Instructions
Flash thru CWM Recovery
I recommend a full wipe Data/Cache/System. You dont have to but dont report issues unless you have done a full wipe including system....
If coming from CM you will need to do a full wipe including System before flashing.
Please Click Thanks
3113 Download Here
3100 Download Here​
Brilliant! Will flash now.
Know if we'll run into same IR blaster issue? Probably, but here's being hopeful
Thanks! dl now!
Welcome. I flashed both but since I don't own the 3100 I can't test the radio. So I leave that up to you guys.
Yeah no ir blaster. I'm Sure our test ota will show up any day now.
Yes downloading ill push thanks when finish to install !
Envoyé depuis mon GT-P3113 avec Tapatalk
Nice work buddy have you tried the kernel of the aokp build with this rom ??
Sent from my GT-P3100 using Tapatalk 2
You are AWESOME
Downloading now................
Radio
P-3100 Radio isn't workin!
lubluchka said:
P-3100 Radio isn't workin!
Click to expand...
Click to collapse
Try a few reboots with difference of 10 min in-between.
Good Luck !
it is just me or auto brightness dosent work ?
Does this require the latest firmware BHL3 to work?? Or else can flash from the old BLH1 firmware??
harry47 said:
Does this require the latest firmware BHL3 to work?? Or else can flash from the old BLH1 firmware??
Click to expand...
Click to collapse
no just flash in recovery and yes you can flash over older rom but do factory reset in cwm !
Smoooooth...
Very nice - Samsung keyboard dock works well, ROM is very smooth and about the only things I can see are that the boot animation has an slight glitch on startup, auto brightness does not work.
Since this is just a test ota I expect we well have updates any day now.
Two questions:
Does autobrightness work?
Since this is based on stock would it receive ota updates that would automatically install and break root and overwrite custom recovery?
Sent from my LG-MS770 using Tapatalk 2
DesDr0id said:
Two questions:
Does autobrightness work?
Since this is based on stock would it receive ota updates that would automatically install and break root and overwrite custom recovery?
Sent from my LG-MS770 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I think it works but the default values are not so great. Also I removed the software update feature.
Is Radio (Phone, SMS) working for anyone ?
I think we need new Modem from BLH3.
If someone finds the radio/modem ill host and update OP with it. Someone was posed to post it but I can't remember who/where.
Nice one , another for for collection.
Thanks
:good:
Aside from the slight glitch on the screen during boot up, no issues here so far.
The change from ICS to JB is going to take some used to, it does feel like a big phone now, hehe. I wish the homescreen could be in landscape.
One change I noticed, is in the youtube app, even if you turn off automatic screen rotation, rotating the screen will toggle full screen on and off. A little annoying when trying to watch videos in bed lying down, but no biggie.

GPS FIX - LG servers / Mackey's FIX / Tweaked by DCOP7

Hi,
I had a few problems with GPS in IZS so I search a bit and try to compile a fix. For me, this appears to be working... But other testers and appreciated
You just have to do the fowling:
In recovery, flash the attached zip
After reboot, using a app like GPS Test (https://play.google.com/store/apps/details?id=com.chartcross.gpstest&hl=en), clear AGPS data
Please, give feedback.
UPDATE:
I've uploaded a new fix (GPS_fix_2_world). This is a different fix from the other, one that isn't depended on any continent.
Source:
http://forum.xda-developers.com/showthread.php?t=953630
Credits to AngelDeath
http://forum.xda-developers.com/showpost.php?p=18096764
Credits to crypted
UPDATE2 - NEW FIX - From Mackey
I've upload a new GPS fix - GPS_FIX_WORLD.zip
This fix is based on Mackey/ShenDu/MokeeOS's ROM, and to be sincere, it is the best fix I've ever seen so far. I've got a lock within a minute without any data/wifi on, without any AGPS data...
Steps for this fix:
Turn off wifi/mobile data (so that it wont download any new AGPS data)
Clear the AGPS data (to be a clean slate)
Reboot to recovery
Flash the fix
Clear cache and dalvik cache (this is the first time I tried and it seems a important step for the fix to work)
Reboot and that's it
Please, try it and give feedback!
UPDATE3 - NEW FIX - Using LG server
After many hours of testing... He is my conclusion. The GPS alone can't get a useful signal...
To make this new fix work...
turn off the AGPS*
clear the AGPS data
delete the files (not folder) in /data/gps
reboot to recovery and flash (http://forum.xda-developers.com/showpost.php?p=42195149&postcount=56)
reboot
open an app like GPS Status and download the AGPS data only from the app (https://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2)
* To turn on/off the AGPS go to localization services and turn on the option that is something like "use wifi and/or mobile data to determine your location"
Don't use AGPS from localization services... You just have to download the AGPS from time to time.
UPDATE4: NEW GPS FIX TWEAKED BY DCOP7
I've made a new fix and I want a few testers. Who can help me?
To make this new fix work...
turn off the AGPS*
delete the files (not folder) in /data/gps
reboot to recovery and flash GPS_fix_tweaked_by_dcop7.zip
Turn on mobile data of Wifi and open GPS Status or something. This will download a file explained below
Need to turn on mobile data or wifi when getting a GPS signal every few days to refresh the file downloaded in point 4.
* To turn on/off the AGPS go to localization services and turn on the option that is something like "use wifi and/or mobile data to determine your location"
What is the difference between this fix and other fixes?
This fix is configured to download the information: Long Term Orbits. This information is like and enhanced AGPS data. The Mackey fix sometimes use this information, that is why some people get a lock very fast, even if they clear AGPS (this information isn't cleared when GPS Status clean the AGPS data). To clear every bit of AGPS data, delete the files present in /data/gps (point 2).
What took me a long time to understand is when this information is downloaded, what interval, etc... It was difficult to understand why the Mackey fix download this information without any patter. That is why, with Mackey fix, after a few days, the GPS performance dropped.
I think I figure it out. Please, test this fix and give some feedback.
Can you make one for Asian? And does it work with CM?
no14me said:
Can you make one for Asian? And does it work with CM?
Click to expand...
Click to collapse
Updated the OP. And it works on stock and CM (GB and ICS and JB)
dcop7 said:
Updated the OP. And it works on stock and CM (GB and ICS and JB)
Click to expand...
Click to collapse
Cm10.1 and no change after flash. Maybe the issue is CM itself
I'll try another place with IZS tomorrow.
Thank you for your work, I am curious to read other experiences on JB.
It was my reason for switching from JB to IZS. GPS never worked for me on JB, but it's working as a blast on IZS. I don't know how huexxx did it, but I always have a fix within 5 seconds outside, and within 20 seconds inside.
Re: GPS FIX
Not a single satellite on jb ( I'm on slimrom).
Sent from my OptimusBlack using xda premium
TheGripper said:
Not a single satellite on jb ( I'm on slimrom).
Sent from my OptimusBlack using xda premium
Click to expand...
Click to collapse
Did you clear AGPS data? Are you from europe or asia?
Re: GPS FIX
dcop7 said:
Did you clear AGPS data? Are you from europe or asia?
Click to expand...
Click to collapse
I'm from europe. I installed gps test and cleared agps data, but nothing.
Sent from my OptimusBlack using xda premium
TheGripper said:
I'm from europe. I installed gps test and cleared agps data, but nothing.
Sent from my OptimusBlack using xda premium
Click to expand...
Click to collapse
I'll do some tests. But apparently, in the past few hours, I can't get any signal too... But about 4, 5 hours ago it worked great.
Back to IZS 5 minute ago. But GPS in my IZS working (don't remember because I used CM from last month): 7 satellite after 1minute, and after flash the fix, it's .... still working, but a bit slower. LOL
no14me said:
Back to IZS 5 minute ago. But GPS in my IZS working (don't remember because I used CM from last month): 7 satellite after 1minute, and after flash the fix, it's .... still working, but a bit slower. LOL
Click to expand...
Click to collapse
Lol. What region are you from?
Re: GPS FIX
You can use this :
http://forum.xda-developers.com/showthread.php?p=39144990
It's really working.
Jindrar2 said:
You can use this :
http://forum.xda-developers.com/showthread.php?p=39144990
It's really working.
Click to expand...
Click to collapse
Thank you but for me, I'm not getting better results...
I'm making a few tests inside my house and now I can't get any signal. But in the clear, I get 5/6 sats
dcop7 said:
Lol. What region are you from?
Click to expand...
Click to collapse
Asian.
After that, in the afternoon GPS stop working. Can't find any satellite And i back to CM.
I need a tester. For this, I need to know the country and region.
I'm on slim rom and no changes after the patch.
If you like I m up for testing, from Germany.
regards
Up for testing
i also used your patch but no changes. detects only 3 satellites does not fix any despite 5 min ...from india on slimbean 4.1.2 optimus black
I'm sorry but I don't have much time to make a fashable.
But you can try this:
http://forum.xda-developers.com/showthread.php?t=1239713
or
http://forum.xda-developers.com/showthread.php?p=18096764
dcop7 said:
I'm sorry but I don't have much time to make a fashable.
But you can try this:
http://forum.xda-developers.com/showthread.php?t=1239713
or
http://forum.xda-developers.com/showthread.php?p=18096764
Click to expand...
Click to collapse
I tried every one of them and nothing worked. I think it is CM related. Now I'm back to IZS. I noticed that there is no gps.conf there. Does a new gps.conf make any difference then?
regards
Mr.Scrooby said:
I tried every one of them and nothing worked. I think it is CM related. Now I'm back to IZS. I noticed that there is no gps.conf there. Does a new gps.conf make any difference then?
regards
Click to expand...
Click to collapse
For me, makes a difference...

[ROM][MIUI]MIUI for Xperia Z[3.8.2]

BUGS
Wired headset/headphone is not working.
CM Bugs - Boot Animation disappears.
Torch - Hangs/Causes FC
Camera - Freezes after a snapshot. (Possible Fix)
Click to expand...
Click to collapse
DOWNLOAD
v3.8.2
This is a completely different port and all previous fixes will be invalid. And you will have to erase data and cache and dalvik-cache completely!
Do a factory wipe.
Flash this ROM.
ROM
Boot into the ROM.
Then, reboot into recovery and flash Gapps.
GApps
Boot into the ROM. Setup your Google Account.
Reboot into the recovery and flash this fix.
Fix-2 for 3.8.2
Click to expand...
Click to collapse
SCREENSHOTS will come soon.
For now, please flash this and provide us with some feedback. Let's get this thing up and running. :highfive: :laugh:
CREDITS
@fareeed
@Taylor_Swift
@Everyone who worked on getting MIUI running
Click to expand...
Click to collapse
Omar! This is for you lol :good:
I shall take this.
And this last one.
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
alnikki25k said:
Omar! This is for you lol :good:
Click to expand...
Click to collapse
Thanks bro. I'll be posting fixes and also Sony based builds too
Sent from my C6603 using xda premium
theminigame said:
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
Click to expand...
Click to collapse
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Thanks a lot for what all of you did to getting MIUI on the Xperia Z !
I will be following this thread to give you feedback.
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
The MIUI V5 Rom work very well. Unfortunately, there is the SD Card problem who cause a lot of ForceClose. But i'm sure you will get it work.
Keep the good work guys !
PS: Sorry for my bad english speaking, i'm french.
EmryX said:
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
Click to expand...
Click to collapse
The recovery is built into the kernel. If you want me to post CWM, I shall post another boot.img. However, I do suggest you to try TWRP. It's much faster and easier.
The recovery is built into the kernel
Click to expand...
Click to collapse
Oh, i didn't know that. Sorry
I don't want to bother you with this. But if you could teach me how i can put my recovery on your build, i will be happy
And keep Mega.Co for the build upload, it's awesome and fast !
Fix-1 By lzyllp.
Fix google pinyin input FC
remove unused settings option from One
add customize screen key positions
fix wrong storage list in framework-res but storage still not work now
http://www.mediafire.com/download/0q3vn350kq0v3mh/Fix-1.zip
for google aosp input FC.
U only need take the lib from input apk and put it into system lib
Some screenshots
Perfect !!!miui are the best rom ever!!!!
alnikki25k said:
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Click to expand...
Click to collapse
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Crashes in Permission manager, so I can't get root.
[email protected] said:
Crashes in Permission manager, so I can't get root.
Click to expand...
Click to collapse
SuperSU. Just got Settings/About to work as well
Sent from my C6603 using xda premium
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Alhaddad said:
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The storage maybe the services.jar problem.
In services.jar.out\smali\com\android\server the all filename start with MountService
I think we need patch some code from yuga
this services mount the usb storage
Taylor_Swift said:
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I was actually thinking about this as well. If we could get Sense 5 to work somehow, it would be fantastic! And go ahead and steal lol. I am working on mounting the storage now.

[ROM[[P31XX] Stock 4.2.2 Debloated Deodexed Zipaligned

Removed
Reserved
Moar reserve
Screenshots
I'm gonna try this. Hope it works better. I'm not having any luck flashing the NEXT kernel and also have no phone audio using the "other" stock-based 4.2.2 (same problem as @ketut's Sammy-based 4.1.2)....
Ahhhh big job Luigi!! :beer:
Screenshots ?
I´ll hit "Thanks" tomorrow (Not able today: "Sorry, you are limited to 8 thanks per day")
You can also use https://www.file1.info/ for uploads.
Anonymous users can store files up to 1 GB and download files at a normal/slow speed. Registered users can store files up to 1.5 GB each, use 50 GB total and get higher speeds. Registration is free.
Click to expand...
Click to collapse
TabletUI patch?
rod555 said:
TabletUI patch?
Click to expand...
Click to collapse
Stock rom default is phablet ui ... btw maybe luigi help u ...
Sent from my GT-P3100 using xda premium
fooiskandar said:
Stock rom default is phablet ui ... btw maybe luigi help u ...
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Not Tablet UI Patch yet.
Also @Android-Andi Screenshots! Yes! I forgot.
Edit: Screenshots added on post 4
Alright. I have a working phone remover. The deny signal is gone. The phone stuff is gone. Only problem is the device reboot when trying to bring up the power menu. So I guess we can't remove mobile data from the settings. Unless I or someone from here can figure something out. Anyways, now I''ll try to add flare effect and fix the mic and stuff.
Luigi2012SM64DS said:
Alright. I have a working phone remover. The deny signal is gone. The phone stuff is gone. Only problem is the device reboot when trying to bring up the power menu. So I guess we can't remove mobile data from the settings. Unless I or someone from here can figure something out. Anyways, now I''ll try to add flare effect and fix the mic and stuff.
Click to expand...
Click to collapse
Please try add ro.carrier=wifi-only to build.prop, NEXT kernel will stop 2 phone related daemon on boot.
Alright, I made my own version of the blackhawk 4 update annnnnnd... mic still doesn't work. @ketut.kumajaya. I think 4.2.2 uses some different files for mic.
Any error with sync app & calendar?
For me everything went well. Realy smooth and fast. But first time i tried to delete some of the things i don't use from system/apps(nothing that i don't usually delete) TW FCs....will try again with only freezing. Ty for your good work
Does swap sd work? thanks
Not working on 3100
on Booting the message "android.phone" has stopped and "android.gapps" has stopped pops every second. Cant even get through the setup process.
Procedure which i followed was from cm 10.1.2
Wipe data-> wipe cache->wipe dalvik->install rom->wipe cache->wipe dalvik and reboot.
going back to cm now.
Thanks.
I have the P3113 and simply go into systemui.apk and remove all signal icons. I also remove all the battery icons simply because I prefer the bat %. I know this does not remove the phone stuff itself but it does get rid of the icons in the Noti bar without any errors.
Not the best way but it works.
fast and smooth but i have an problem after flashing there is no gallery app
a1shakes said:
on Booting the message "android.phone" has stopped and "android.gapps" has stopped pops every second. Cant even get through the setup process.
Procedure which i followed was from cm 10.1.2
Wipe data-> wipe cache->wipe dalvik->install rom->wipe cache->wipe dalvik and reboot.
going back to cm now.
Thanks.
Click to expand...
Click to collapse
try formatting /system and /data before you flash the ROM (just be sure you have a nandroid backup, ofc ^_^)

[mb886][CWM Advanced Edition] PhilZ Touch

Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
New Unified (moto_msm8960) by @hachamacha
http://forum.xda-developers.com/showthread.php?t=2686374
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Older device specific (mb886)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Thank you sir as always. This time is just a thank you x 1000000= priceless
I can't try until tomorrow at the earliest, but can anyone see if "install zip from sideload" works?
Sent from my MB886 using Tapatalk
B.A. dude. This is hella tight lol @Phil3759 great job!
Sent from my MB886 using XDA Premium 4 mobile app
Great work. Posted link earlier on the other thread, didn't want to start another. Nice to have the actual dev do so.
Thanks!
This is awesome, Thanks!
Anybody flash this and care to report what works and what doesn't. I just now saw this and I'll be flashing when I get home from work in a little while. I'm gonna assume that this works pretty good because there isn't a metric ton of posts about things not working.
The only problem I've noticed is that the CM updater doesn't seem to be passing the path to the update zip properly. I didn't have that problem with cwm recovery. However, I have a strange "/0/" in my internal storage path. Therefore, I can't blame either.
Backups, restores, and flashing seems to be working great! Love the customizable interface.
Sent from my MB886 using xda app-developers app
cbcomputing said:
The only problem I've noticed is that the CM updater doesn't seem to be passing the path to the update zip properly. I didn't have that problem with cwm recovery. However, I have a strange "/0/" in my internal storage path. Therefore, I can't blame either.
Backups, restores, and flashing seems to be working great! Love the customizable interface.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
because stock cwm uses non sense /sdcard/0 in its sources
If you like to use the updater from cm, just set recovery to /data/media
Else, avoid cm updater
I am not going to restore non sense /sdcard/0 things in my sources
Thanks for clearing that up for me. I was wondering what caused that. I've just been flashing the update zips manually.
Thanks for the awesome recovery!
Sent from my MB886 using xda app-developers app
skeevydude said:
Anybody flash this and care to report what works and what doesn't. I just now saw this and I'll be flashing when I get home from work in a little while. I'm gonna assume that this works pretty good because there isn't a metric ton of posts about things not working.
Click to expand...
Click to collapse
Sideload is working and everything else, but the console log is not shown correctly while flashing. After it ends goes back to normal.
m0ndul said:
Sideload is working and everything else, but the console log is not shown correctly while flashing. After it ends goes back to normal.
Click to expand...
Click to collapse
a better description or really a video during this will help me fixing it
Excellent app Phil, thank you
Sent from my MB886 using XDA Premium HD app
Phil3759 said:
a better description or really a video during this will help me fixing it
Click to expand...
Click to collapse
Here´s a video...
Please don't pay attention to my cracked digitizer...
m0ndul said:
Here´s a video...
Please don't pay attention to my cracked digitizer...
Click to expand...
Click to collapse
Many many thanks :good:
This is of real help, except breaking my neck to watch rotated video
I will dig into it as I cannot reproduce it here
Can you upload your settings file?
Code:
/data/philz-touch/philz-touch_6.ini
That way I can try to reproduce it
Phil3759 said:
Can you upload your settings file?
Code:
/data/philz-touch/philz-touch_6.ini
That way I can try to reproduce it
Click to expand...
Click to collapse
Here it is
截屏功能 bug 图像扭曲
The screenshot function bug image warping
That only works for some devices. Read original op linked on first post
m0ndul said:
Here´s a video...
Please don't pay attention to my cracked digitizer...
Click to expand...
Click to collapse
I was turning crazy to reproduce it until I saw you were using sideload
Please, can you confirm that the display bug happens only in sideload mode?
If you flash normally in recovery, the text fits right?
Phil3759 said:
I was turning crazy to reproduce it until I saw you were using sideload
Please, can you confirm that the display bug happens only in sideload mode?
If you flash normally in recovery, the text fits right?
Click to expand...
Click to collapse
That's right, only happens when sideloading. Choosing a ZIP from the internal memory or SDCard for flashing shows a correct command line output.

Categories

Resources