[Q] Darky XXJVR R4 to FASTY II. - Captivate Q&A, Help & Troubleshooting

I would like to hear from somebody willing to help. I would like to know the proper way to go from DarkysRom R4 to FASTYII. I'm really nervous when switching ROMs. Following steps make it easier. Thank you guys in advanced.

Took the chance on my own. Here's what I did:
1. Returned to Stock, Eclair JF6.
2. Rooted, installed CWM.
3. Then just followed Fasty's Instructions step by step. Bootloaders/ wiping/flashing.
My first 2 attempts on flashing the GB bootloaders failed. The first time, i could get into download mode with the volume down + power combo. Second time, no combo worked. I had the Phone ! PC picture. Had to use my 3 Resistor jig to get it into Download mode. 3rd time I tried, I changed usb ports. And it flashed with no problems. I have FASTY II now on the phone, definitely fast & definitely a noticeable difference in battery life coming from DarkysROM.
Hope this helps anyone else that is unsure.
So I guess just keep trying to flash the bootloaders if you are having problems.

I would of just flashed the bootloaders then a proper kernel and booted into cwm and flashed the rom. But you probably already had tthe bootloaders since you were on JVR...
Sent from my SGH-I897 using xda premium

xijar said:
I would of just flashed the bootloaders then a proper kernel and booted into cwm and flashed the rom. But you probably already had tthe bootloaders since you were on JVR...
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Yeah, I tried to flash the bootloaders when I was on DarkysRom, but it failed on me. So I had to go back to stock.

Related

[Q] Odin one-click softbricks my phone

I'm having a bit of trouble with Odin one-click. Last night I decided to upgrade from Perception 10.4 (Froyo based) to Perception 2b3 (Gingerbread based). I plugged it in, put it into download mode, and activated Odin. It ran just fine, but at the end, my phone rebooted into a boot loop. I ended up putting together a jig to get it back into download mode, and tried again. Same thing happened. I eventually ended up using a Froyo Odin to qwerty least get it working again. Does anyone have any ideas as to why Gingerbread Odin soft bricks my phone, and what I should do to fix it? Let me know if you need any more details. Thanks in advance.
I know this would do better in the odin thread, but I don't have enough posts to post there, mending the fact that I've been lurking around for close to a year
Guess I'll just keep posting here until a) someone responds or b) I have enough posts to ask in the proper thread
I'd ready like to be able to get my cappy running Gingerbread tonight. Anyone have any ideas?
What one click are you taking about? Is it this one?
http://forum.xda-developers.com/showthread.php?t=731989
If it is, this will take you to stock eclair. Not sure what ur talking about with one click froyo. There is a one click GB from Design Gears in the development section. It flashes the newest release of GB stock. If you can get into dl mode you can flash either of the one click odins, but read about both before you do. Bootloaders are involved, and if you don't know about them they can be trouble. Read in development section.
This is a link to one click for GB stock. CONTAINS BOOTLOADERS.
http://forum.xda-developers.com/showthread.php?t=1127249
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry, for some reason can't get that second link to work properly. Doing this from my phone. Just type in the url. If you decide to flash this GB oneclick, you'll be on the kf1 "official" release. Check dev section and you can flash beta cognition if you want. People are having great results with this rom, including myself. Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
I recommend flashing the KF1 odin one-click. I just flashed that one, and it worked like a champ. Its in the Continuum v6 thread at http://forum.xda-developers.com/showthread.php?t=1136128. If you read the instructions it will work flawlessly. The only odin problems I've ran into have been user induced.
Okay, I'll try out that KF1. All I really need it for is to get the bootloaders so I can install other 2.3 roms. Will this work for that?
The Froyo Odin I was tackling about was just an older version, I think.
Edit: Why is it so much more difficult to go from 2.2 to 2.3 than it was going from 2.1 to 2.2? Upgrading to 2.2, I just had to use CWM to flash the new rom onto the phone.
Okay, I was trying to follow the instructions in the Continuum thread, and it looks like I am supposed to go back to Eclair before flashing Continuum. I was using this one-click Odin, and it was causing my phone to softbrick. No idea why. Will I be able to use that KF1 Odin to get to Gingerbread, then flash other GB based roms?
And by the trouble caused by bootloaders, you just mean how it will hardbrick if it loses connection in the middle of flashing, right? Or is there more. I've been switching out roms on phones for a while now, but it hasn't been this complex before...
If you mix bootloaders, you will hard brick ur phone. 2.1/2.2 roms have the same bootloaders. GB boots are different. That's why there is more involved to flash GB roms. Basically all the GB roms are I9000 based roms. The kf1 is an i897 based stock rom. If you flash kf1 stock rom, you will lose cwm. You can try cog beta 2 rom if you would like. After following steps to flash GB bootloaders with link mentioned above, check dev section. There are currently 2 kf1 custom roms. I use the cog beta 2, and it works great. people have mentioned that they have flashed i9000 roms over kf1, but I personally haven't, cuz so far cog beta is working great and the call quality is outstanding compared to any of the i9000 roms. Read read read read, before taking any steps. You don't want to ruin it phone! If you want to flash i9000 based GB, read this:
http://forum.xda-developers.com/showthread.php?t=1045734
Btw, what build is ur phone? (4 digit number under battery). Some builds, especially 1010 have trouble with oneclick.
Sent from my SAMSUNG-SGH-I897 using XDA App
So it sounds like what I need to do is use that KF1 Odin, then I can flash other roms over that? How can I tell which custom roms are KF1? Is Perception KF1 based? What would you recommend I read to make sure I'm doing it right? Are there specific threads that are especially helpful for this? Thanks for all of the help, I'd really like to learn how to do this.
It'll say in the title. Liked I said, currently there are only two kf1 based roms. Cog beta and another one that I can't remember the name of. If it says something in the title besides kf1/or i897, it's for i9000. Ex/ jvh, jvo, jvp are all i9000 based.
Sent from my SAMSUNG-SGH-I897 using XDA App
What do I need to do if I want to use a non-KF1 based GB rom? I've been very happy with Perception, and I'd like to keep using it.
If you want to flash GB stock that is based off of I9000 read and follow this, step by step:
http://forum.xda-developers.com/showthread.php?t=1045734
After you do this you can flash GB roms via cwm.
If you want to flash GB with kf1, you can, and people have been running I9000 based custom roms on the same bootloaders. JUST MAKE SURE YOU CHECK ANY ROM YOU'RE FLASHING TO SEE IF IT INCLUDES BOOTLOADERS. I personally haven't run any I9000 roms after flashing kf1, but I believe if you want to do this, (NOT POSITIVE ABOUT THIS, SO YOU MIGHT WANT TO RESEARCH THIS FIRST) you would have to flash an appropriate I9000 kernel using odin (not oneclick, but the full version). Put the kernel in the PDA slot, uncheck repartition, and auto reboot and flash. That way you will get cwm 2 or3 back which will enable you to flash the rom you want. (Remember, with stock KF1 you lose cwm). After kernel flashes, boot ONLY into recovery, and flash rom that you put on your SD card before doing any of this, and flash via cwm. AGAIN, NOT POSITIVE THIS IS WHAT YOU DO, SO RESEARCH.
That makes a lot more sense than the instructions I was trying to follow. I'll try that in a bit.
It worked! Thanks for all of your help
What did you end up doing? GB I9000 stock, or kf1 then flash I9000 custom rom over it?
Sent from my SAMSUNG-SGH-I897 using XDA App
I used the I9000 GB stock rom from that link you posted, then flashed a custom rom over it. I ended up using Perception 2 beta.
Glad it worked for you.
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] GB Bootloaders

I am running Cog 5B2. It has the captivate GB bootloaders. If i want to change to a i9000 GB rom say Apex do I need to change bootloaders or will the GB captivate ones work?
No you do not need to change bootloaders to go to any other gb rom. Plus I've read on here that the gb bootloaders are backwards compatible with froyo/eclair though I have not confirmed that yet myself.
So there really is no need to ever flash bootloaders again.
I wouldn't say never. But it is good to avoid flashing bootloaders if possible, if something goes wrong flashing bootloaders can result in an actual bricked phone.
On the other hand just flashing roms, kernels and modems sans bootloaders the worst you can likely do is get into soft brick situation or a bootloop which can be easily fixed.
Yup I flashed Serindipty7 right on top of cog 5.2 and then Mosaic V right on top of that no issues to report just make sure you wipe data factory reset before. I haven't flashed anything that has the talon kernel, but still no need to flash bootloaders
Sent from my phone on vacation
Keep it mind GB bootloaders are not backwards compatible with all of them. I know that CM7 does not work with GB bootloaders.
I prefer the I9000 gb bootloaders. They both work the same but The captivate ones have the same button combos which I've always thought were really stupid. The I9k's combos are just more intuitive and simplistic the way they should have always been if you ask me.
Vol up + power = recovery
Vol down + power = download
Nice
Clean
Simple
Well turns out going from Cog5b2 to OBSSESSION puts you in a bootloop. Reflashing Cog I guess for now.
vdubguy said:
Well turns out going from Cog5b2 to OBSSESSION puts you in a bootloop. Reflashing Cog I guess for now.
Click to expand...
Click to collapse
Try flashing to stick KF1 before flashing a new rom (there is a 1 click without bootloaders to minimize risk)
I haven't still figured out a reliable way to flash back to Stock Froyo on my 2 captivates which ended up being bricked. I was on Cezar's 897 GB bootloaders. Tried flashing back to Froyo KB1 from here but it failed using Odin3 1.3. I got a new phone, which now has stock KB2. Does anyone know how to flash stock Froyo reliably ?
prbassplayer said:
Try flashing to stick KF1 before flashing a new rom (there is a 1 click without bootloaders to minimize risk)
Click to expand...
Click to collapse
Really didn't know there was a 1 click without bootloaders. Time to hit up the search!
vdubguy said:
Well turns out going from Cog5b2 to OBSSESSION puts you in a bootloop. Reflashing Cog I guess for now.
Click to expand...
Click to collapse
I read someone have similar issue and I was also on cog5b2 and followed their instructions (which I'm going to paraphrase now) and worked perfectly. I'm now running Mosaic V with the KF1/i897 boot loaders...
OP on Mosaic V has link for xcal's 1.2 i9000 kernel.tar download that. Start at step 5 on that OP, use Odin 1.7 (linked as 'Files you will need' in the MV OP) to flash xcal's kernel, make sure to not auto reboot from Odin and when it's done flashing kernel, do a battery pull and then go to recovery mode, factory reset and then flash Obsession.
Sent from my GT-I9000 using XDA App
vdubguy said:
Really didn't know there was a 1 click without bootloaders. Time to hit up the search!
Click to expand...
Click to collapse
This is KF1 without Bootloaders
Madtowndave said:
I read someone have similar issue and I was also on cog5b2 and followed their instructions (which I'm going to paraphrase now) and worked perfectly. I'm now running Mosaic V with the KF1/i897 boot loaders...
OP on Mosaic V has link for xcal's 1.2 i9000 kernel.tar download that. Start at step 5 on that OP, use Odin 1.7 (linked as 'Files you will need' in the MV OP) to flash xcal's kernel, make sure to not auto reboot from Odin and when it's done flashing kernel, do a battery pull and then go to recovery mode, factory reset and then flash Obsession.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Cool Thanks everyone for the help. I may try Obsession again tomorrow. Gotta hit the sheets....and up early for work.
Srikar_NBK said:
I haven't still figured out a reliable way to flash back to Stock Froyo on my 2 captivates which ended up being bricked. I was on Cezar's 897 GB bootloaders. Tried flashing back to Froyo KB1 from here but it failed using Odin3 1.3. I got a new phone, which now has stock KB2. Does anyone know how to flash stock Froyo reliably ?
Click to expand...
Click to collapse
this is the recommended way to go back to stock that contains both main and secondary bootloaders http://forum.xda-developers.com/showthread.php?t=731989
also this one which contains no bootloaders http://forum.xda-developers.com/showthread.php?t=995143
CremeFraiche said:
this is the recommended way to go back to stock that contains both main and secondary bootloaders http://forum.xda-developers.com/showthread.php?t=731989
also this one which contains no bootloaders http://forum.xda-developers.com/showthread.php?t=995143
Click to expand...
Click to collapse
Yes, but aren't both of them methods to go back to Eclair and not Froyo ? My earlier Cappy got bricked bcoz I tried stocking back to Eclair, when it came with Froyo.
My question is how do you flash custom rom while on kf1 boots? Running cog 5 beta 2 with cwm4. Can I flash roms like I did before via cwm, even though I'm on cwm4, or should I flash a kernel with cwm 2 or cwm3 first, than flash rom thru that?. This question is for both froyo and GB/i9000 roms
Sent from my SAMSUNG-SGH-I897 using XDA App
Cdub3 said:
My question is how do you flash custom rom while on kf1 boots? Running cog 5 beta 2 with cwm4. Can I flash roms like I did before via cwm, even though I'm on cwm4, or should I flash a kernel with cwm 2 or cwm3 first, than flash rom thru that?. This question is for both froyo and GB/i9000 roms
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Well most roms have a Kernel that they recommend. Best I can figure if you want to flash a froyo rom go back down to stock eclair with one click (don't flash bootloaders) and flash rom of your choice. For GB just flash stock KF1 and flash gb rom? That's just me guessing though.
prbassplayer said:
Well most roms have a Kernel that they recommend. Best I can figure if you want to flash a froyo rom go back down to stock eclair with one click (don't flash bootloaders) and flash rom of your choice. For GB just flash stock KF1 and flash gb rom? That's just me guessing though.
Click to expand...
Click to collapse
Oneclick eclair contains bootloaders.
To simplify my question, are rom flashes compatible with cwm4, or do I need cwm2/or 3 to flash roms, whether froyo/GB?
Sent from my SAMSUNG-SGH-I897 using XDA App
Cdub3 said:
Oneclick eclair contains bootloaders.
To simplify my question, are rom flashes compatible with cwm4, or do I need cwm2/or 3 to flash roms, whether froyo/GB?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
JF6 is eclair is it not? If it is here is a JF6 odin with out bootloaders. If Jf6 is Froyo well my mistake. Still 2.2 stock would still work i think. Point is cmw version wont matter if you go back to stock and flash from there, and its usually a better idea to flash to stock anyways.

[Q] After flashing back stock ROM, the phone keeps blinking on the boot screen (HELP)

I am in desperate need of help you guys! I screwed up so hard that I don't even know where to begin...
THE SITUATION:
-Right now when I go to turn on my phone, it will only stay on the current SAMSUNG GALAXY S I9000 screen (the very first screen when booting your phone) and it keeps flashing in and out.
Before trying to use Odin to put back the original Kernal on my phone, it was just stuck as the SAMSUNG GALAXY S I9000 screen, still wouldn't start. <I followed this website step by step>
http://www.samsunggalaxysforum.com/...-to-a-stock-rom-after-installing-darky's-rom/
BEFORE ALL OF THIS EVER HAPPENED:
I finally rooted my phone and manage to download Clockworkmod recovery on my phone and then used it to flash Darky's 10.2 custom ROM. Everything turned out great except at the beginning of the boot, the screen turned all rainbow coloured, completely distorted, and it continued to do that. I then tried to go back to Recovery mode to do the Voodoo lagfix but I couldn't even get into the recovery mode anymore, it either wouldn't let me, or it did but the screen didn't go to it properly (more likely the first one). I read somewhere that if you reflash your phone again, it should make all the tweeks go away. So I tried that from the Darky's tools menu and ever since then, I've been stuck with the Boot Screen this whole time...
I already bricked my phone once, and that was before the Flashing Boot Screen.
I really need help you guys, I would at least like to have my phone back to the original basis, at least! Your help would be greatly appreciated!
THANK YOU
P.S. (i'm not that great at all this phone tweeking, but I've succeeded in doing it up until yesterday)
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
gfacer said:
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
Click to expand...
Click to collapse
Yes, I can get into download mode! (thank you for reading my post).
If it's not too much to ask, could you maybe find the ROM that would be good for me to flash, considering my situation?
I want to be sure that it's what the top tech guys would recommend
A link would be appreciated
thank you again!
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
gfacer said:
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
Click to expand...
Click to collapse
So in essence all I have to do is flash the Darky ROM V10.2 with Odin using the Download mode on my phone and it should be okay?
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well...I did everything you said. The ROM is on there alright, it flashed and everything (And I know this because now when the boot screen STILL FLASHES, the darkcore & darky's rom logo are on it too).
THIS TIME AROUND:
The stock recovery seems to work...
any ideas??
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Alright I'll try and reflash the same one using a different version of odin the. I'll let you know what happened
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
tried ezodin, flashed it, and i still get the exact same thing I've exhausted every single possibility there is!!!
I really need help on this, my warranty is not gonna do anything because i have the phone rooted..
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
gfacer said:
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
okay that could be useful data potentially (let's hope it won't have to be).
If you didn't see my reply from the other thread, here it is:
Once I rooted my phone, I automatically went from Stock Froyo to Darky's 10.2 extreme edition. It worked and everything except for that color disfiguration and the clockworkmod recovery not working.
It's weird because after I flashed my first darky's rom, i checked the phone and it said that the firmware version was 2.3.X (I believe X may have been 4). So from what you're saying, I don't exactly think it has anything to do with the fact that I went straight from froyo stock to GB darky ROM.
So are you saying that I should flash darky's 9.3 for Froyo and THEN flash the latest version?
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Ok, so just to be 100% on this
-I should flash Darky's 9.2 froyo onto my phone,
-then I should flash regular GB onto my phone (Not sure about the bootloader part though, if you could clarify that)(Also where would I get JUST a stock GB ROM?)
-then I can flash a custom GB ROM?
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
roma17 said:
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
Click to expand...
Click to collapse
I think you are right but other than trying again and again, which I've done before -though now I know why I had too - I am out of suggestions. Good Luck and if I have a brainwave I'll let you know.
Sent from my GT-I9000M using XDA Premium App
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
gfacer said:
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
Click to expand...
Click to collapse
Okay, basically at this point, I just want my phone to work I've tried what you said. I remember that before rooting my phone initially I was running Froyo 2.2.1. So I found the ROM for that ( http://www.samfirmware.com/WEBPROTECT-i9000.htm ) Just like you said. I downloaded from the *Provider Samsung Galaxy S i9000 heading and picked the I9000BOJS5 ## from February 2011 because I think somewhere around there I updated my phone to Froyo. Flashed it, did everything, still no luck.
I've had a recent hunch though. When the bootscreen boots up, it keeps saying i9000 only, when before it used to say i9000M at least for a little bit (yes my phone is i9000m). Is there a stock froyo rom that's specifically designed to go with the i9000m model? Or are they just all the same?
Never give up
-Thank you so much

One click gingerbread question

So I accidently bricked a build #1010 phone using oneclick to revert to stock, not realizing it wasn't compatible. I found this today on XDA:
http://forum.xda-developers.com/showthread.php?t=1127249&page=29
My phone currently is build 1009, got it through a warranty exchange, came with froyo pre-installed. Is it compatible or will I brick trying to run? I am also aware of the recovery and the "unsigned packages" thing...do I need to change the recovery first before I run? Thanks
You would brick if you went to 2.1, but that is totally compatible! Have fun and. After flashing that go look for. Stock KH3 and you have to flash KF1 then KH3. Just a min I will link you to everything.
KF1- http://forum.xda-developers.com/showthread.php?t=1127249
KH3 CWM kernel- http://forum.xda-developers.com/showthread.php?t=1242533
Stock KH- http://forum.xda-developers.com/showthread.php?t=1232703
Sent from my SAMSUNG-SGH-I897 using xda premium
Thanks for the quick response! Yes my previous phone was build #1008 and I ran oneclick several times on it with no issues. My wife made a warrenty claim on hers, and I thought i'd be nice and install cog on it, and I couldn't get the recovery to work so without even thinking about it I ran one-click on it, and I bricked it. Honestly I had no idea what build number my phone was back then, but after the brick I found out her new warranty exchanged phone was build #1010
Ever since I've been deathly afraid of running anything with bootloaders. When my speaker died on my original captivate I didn't run one-click, instead i used Odin3 and found a CWM flashable eclair rom, and ran that instead, and then used kies mini to go to froyo. I've had my newer captivate since July, and been running stock since, getting sick of all the issues it has, none of which i noticed in cognition. I actually logged on to get Froyo Cognition, but the links are all broke to it, so I figure I might as well try gingerbread out.
I'm on KH3 stock right now and its great! And it's the GB bootloaders that fix the 3button fix, no need for eclair bootloaders since they are backwards compatible!
Sent from my SAMSUNG-SGH-I897 using xda premium
Wait you hard bricked? with 2.1 stock 1 click? Ive heard of bootloops but never hard bricked.
He soft bricked probably, not lowly to hard brick on a 2.1 flash unless he did the3 button combo fix
Sent from my SAMSUNG-SGH-I897 using xda premium
Well I'm pretty sure it was hardbricked. It wouldn't do anything, no 3 button, no trick anyone suggested to try, it just stayed black and unresponsive. I don't have a jig but that was about the only thing I hadn't tried... So I gave up and made an insurance claim. And to be honest I haven't put a custom rom on since
Sent from my SAMSUNG-SGH-I897 using XDA App
Did anything happend if you pressed power? If it didn't then Odin might have failed while flashing a bootloader....
Nope nothing. Basically half way through it just stopped responding and i eventually gave up and unplugged. It wouldn't do anything. It happened to a friend of mine too but luckily for him when he pushed the power button he got the warning sign on the screen. My phone was completely dead and wouldn't respond at all
Sent from my SAMSUNG-SGH-I897 using XDA App
all you have to do use the odin one click to go back to stock which is jf6 then use odin 3 and you can goto kh3. no other flashes are needed. ive done it this way 10 times and no bricks.

[Q] [URGENT] Flashing ROM

I don't know where I started but I've ended up recovering from the dreaded:
{Phone} -/!\-{PC}
situation by loading I897UCKB1-homeBinary.tar into all slots in ODIN w/ Bootloader mode enable.
I used the volume buttons + plugging in USB to get into download mode as it was literally the only thing left.
Now I can only load DIRECTLY into the recovery menu without even putting a combo.
I JUST reflashed with Speedmod [speedmod-kernel-i897-k13c-500hz] as it was the only CWM shell I could get to work. The one in the Cyanogenmod wiki is really the drunk driver that led me here some 14 hours ago. And when I say work I mean i ca reach the recovery shell, because CWM actually was just glitching the living hell of my screen with lines of all colors and dots everywhere.
I want ANY ROM AT ALL FLASHED. The original was 2.1. All I have is CM7.zip and GoogleApps.zip in my internal memory. I can't mount my ext-sd at all, as it just gives an error. What do I do now?
Sorry for the spelling and poor in advance, it's 4AM and I haven't slept in 3 days.
I've tried LOADS and would just really like to have a relatively functional phone.
Go here and try flashing to stock. http://forum.xda-developers.com/showthread.php?t=1300843
I suggest kk4 one click with bootloader re partition
Sent from my SGH-I897 using xda premium
Thanks! I'm grabbing:
"i897uckk4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe.zip"
now. Weird how that was just THERE and my sleep was nowhere to be found hiding underneath it. I'll report back asap.
The garbled boot screen you saw was due to having mismatched bootloaders. The guide specifically says you must be on gingerbread to follow the guide. So either use a non-gingerbread kernel, or upgrade to GB
Sent from my CM9 ICS i897 Captivate
Working perfectly. Took the CornKernel_UCKK4_v706 Kernel so I could customize a bit more. Rooted. And installed rom manager.
Now it is time to step up ICS
Sent from my SGH-I897 using xda premium
me too used "i897uckk4_Odin_One_Click_CONTAINS_Bootloaders_Re-partition_Full_Wipe.zip" now i want a network unlocked and stable ICS or GB ROM let me know with instructions and if i did something wrong how can i revert back to the ROM (i897uckk4_Odin_One_Click_CONTAINS_Bootloaders_Re-partition_Full_Wipe.zip) i've installed
Try serendipity VII , I flashed it earlier and I think its the best stable and fastest rom I used. Its awesome, and you can customize it so much. Link is in my sig.
Sent from my Serendipity VII flashed Captivate using xda premium

Categories

Resources