i was trying to upgrade my firmware with odin3
I've put the
PIT- s1_odin_20100512.pit
Phone – MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5
CSC – GT-I9000-CSC-MULTI-OXAJVP.tar.md5
But i left The PDA File empty..
i've checked the re-partition and press start and it's done the phone has been shouted down and it's not booting anymore not even into the S Bricked mode...
i've tried to pull up the battery and put it again but doesn't work
tried to pull up the sd card and the SIM but nothing has changed
trying to put the charger on but even it's not charging
my phone is like in a coma :W a deep one
Have you tried the jig? if yes then you can try this
http://forum.xda-developers.com/showthread.php?t=1236273
KeepTesting said:
i was trying to upgrade my firmware with odin3
I've put the
PIT- s1_odin_20100512.pit
Phone – MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5
CSC – GT-I9000-CSC-MULTI-OXAJVP.tar.md5
But i left The PDA File empty..
i've checked the re-partition and press start and it's done the phone has been shouted down and it's not booting anymore not even into the S Bricked mode...
i've tried to pull up the battery and put it again but doesn't work
tried to pull up the sd card and the SIM but nothing has changed
trying to put the charger on but even it's not charging
my phone is like in a coma :W a deep one
Click to expand...
Click to collapse
use EZodin to flash bak to stock 2.1 and then install watever u want.... same thin happened to me and was fixed in no time saved me alot of bricks, remember to hit the thanks button if this helped
Flash again.. If you can boot into download mode that is..
Sent from my GT-I9000 using xda premium
If anytime anysuch thing happens then first check that can you go into download mode or bot Coz if u can then no problem Cox then you can fix any problem but if u can't then jig is the only hope left for you! (Also remember that sgs doesn't go into recovery and download mode when connected to charging)
Sent from my GT-I9000 using XDA Premium App
BHuvan goyal said:
If anytime anysuch thing happens then first check that can you go into download mode or bot Coz if u can then no problem Cox then you can fix any problem but if u can't then jig is the only hope left for you! (Also remember that sgs doesn't go into recovery and download mode when connected to charging)
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I agree
Sent from my GT-I9000 using xda premium
Thank you all
My last hope is the Jig. dunno if they sell jigs over here i will ask for it :W i don't want to lose my little Sam :W
Related
Pls can anyone help me im sooooo desperate. i just upgraded my fone via kies but after upgrade my fone is now blank, i cant use it anymore. pls hell. did i brick my fone??? can i bring it to life again??
You should try to reinstall the stock firmware. First see if you can get into download mode. Two ways, while your phone is off, hold down volume, the home button, and power button together till you get a yellow sign that has a digging android. If that don't work, other way is to take battery out, hold down volume, home button, and power together and reinsert the battery. Once you get to that stage, use Odin to reinstall your firmware.
Sent from my GT-I9000 using XDA App
sfms said:
You should try to reinstall the stock firmware. First see if you can get into download mode. Two ways, while your phone is off, hold down volume, the home button, and power button together till you get a yellow sign that has a digging android. If that don't work, other way is to take battery out, hold down volume, home button, and power together and reinsert the battery. Once you get to that stage, use Odin to reinstall your firmware.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
shud all my apps be restored?? or back to square 1?
Well seeing as though you updated via kies, all your apps are deleted. I would just start fresh and back to stock. After that I would install a custom rom from the forums here, in my opinion, these rom makers do a great job making Roms that will make your phone be a phone and more
Sent from my GT-I9000 using XDA App
sfms said:
Well seeing as though you updated via kies, all your apps are deleted. I would just start fresh and back to stock. After that I would install a custom rom from the forums here, in my opinion, these rom makers do a great job making Roms that will make your phone be a phone and more
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
so did i really bricked my fone then? if i send my fone to samsung do u think it will void my warranty?
if im back to square one, can i upgrade to froyo 2.2?
i will tell them what really happened that ive upgraded my firmware via kies then my fone did not boot up.
That will work ;-)
Sent from my GT-I9000 using XDA App
I wouldn't really say you bricked your phone. If you can get into download mode you are clear and your phone can come back to life. Just so you know.
Sent from my GT-I9000 using XDA App
sfms said:
I wouldn't really say you bricked your phone. If you can get into download mode you are clear and your phone can come back to life. Just so you know.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i tried doing the download mode but i cant get to that
Two choices return phone to Samsung saying broke under Kies update .
Or use recovery jig and flash stock firmware this is an unofficial method that will invalidate your warranty .
jje
sfms said:
You should try to reinstall the stock firmware. First see if you can get into download mode. Two ways, while your phone is off, hold down volume, the home button, and power button together till you get a yellow sign that has a digging android. If that don't work, other way is to take battery out, hold down volume, home button, and power together and reinsert the battery. Once you get to that stage, use Odin to reinstall your firmware.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
\hey i got the yellow sign digging whats next???
JJEgan said:
Two choices return phone to Samsung saying broke under Kies update .
Or use recovery jig and flash stock firmware this is an unofficial method that will invalidate your warranty .
jje
Click to expand...
Click to collapse
i got the yellow sign digging what,s next??
softpinkishlips said:
i got the yellow sign digging what,s next??
Click to expand...
Click to collapse
Flash stock firmware for your phone via Odin .
http://forum.xda-developers.com/showthread.php?t=882014
jje
JJEgan said:
Flash stock firmware for your phone via Odin .
http://forum.xda-developers.com/showthread.php?t=882014
jje
Click to expand...
Click to collapse
i got the yellow digging but my fone is not connected to my pc. i turned it off again. so should i connect my fone via usb to my pc? then press again the 3 bttons?
Sorry went to bed, just woke up. Anyways download the stock firmware for your phone. Make sure you download the right one. Meaning if you have the i9000M, download i9000M, or if you have i9000T, download i9000T. If you check behind your battery you'll.find your model. I don't think it really matters, I mean your just gonna flash another rom once your phone is back to life for sure. ;-)
Sent from my GT-I9000 using XDA App
Odin will detect your phone if your phone is in download mode.
Sent from my GT-I9000 using XDA App
sfms said:
Odin will detect your phone if your phone is in download mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
ok i have a few questions: after flashing my fone will all my apps be restored or ill be back to square 1? what is flashing means? if this did not happen to me, is flashing still needed?
softpinkishlips said:
ok i have a few questions: after flashing my fone will all my apps be restored or ill be back to square 1? what is flashing means? if this did not happen to me, is flashing still needed?
Click to expand...
Click to collapse
what odin will i use? there are 3
im here now. it says: cant mount / dev/block/stl10 invalid argument
ex. copy dbdate media: cant mount DBdata
your storage is not prepared yet. pls use UI menu for format and reboot actions
copy default media content failed
here i go, i tried to flash 2.3.4, i didnt disable lag fix, was on fugu ultra with 10.1re, now im stuck on the first galaxy boot screen, yes i have left it for ages, yes i have tried flashing stock rom, yes i have tried clear and factory reset, you name it i have tried it.
I can get to dl mode, have i stuffed my phone some how?
thanks in adavnce
Try flashing Ezbase with repartition/pit file, and it should put you back to working order. http://forum.xda-developers.com/showthread.php?t=991792
+1 ezbase is our saviour!
Sent from my GT-I9000 using XDA Premium App
flashed everything seemed to ok, but phone didnt restart and now wont turn on
jezza11 said:
flashed everything seemed to ok, but phone didnt restart and now wont turn on
Click to expand...
Click to collapse
So you've opened ezodin, entered the 3 files into the right sections(PDA,PHONE and CSC) and entered the pit file in the Ezbase post, then put your phone into DL mode and plug in. Then flash. The repartition should remove the lagfix. Give it another go..
i cant the phone wont turn on now
Do you have download mode? Or anything? Does the screen light up at all?
nothin just a dead phone
jezza11 said:
nothin just a dead phone
Click to expand...
Click to collapse
Try taking battery out for 1/2 hour, replace, then try entering reload mode again
Sent from my GT-I9000 using XDA Premium App
If nothing comes to screen your phone is totally dead. You must send it to samsung unless you have Riffbox or other JTAG device.
here is my problem ..
i was on ics euphoria when i get some FC. i tried to get back JM9 rom using Odin3 when my phone was fall down during the operation now when i turn it on there is image of phone.../!\....pc
i don't have the download mod usb jig doesn't work and also one click or unbrickable resurrector on linux .well it seems that I'd do hardware modifications make a connection between xOM5 resistor & xOM3 or xOM0 is that true?
is there in other thing to do? i need help
Sent the Service Centre for repair if you still have your warranty. I bricked my phone twice, rooted and in custom rom and they couldn't find out as long as you have BSOD(phone.../\...pc). If you don't have warranty anymore try flashing a stock rom using odin.
___________________________
Hit the thanks button,
show some appreciation.
If you can go to download mode by holding the down volume + Home Key.
Keep them pressed & turn on the phone.
If you are able to enter download mode.
Try to download a original firmware eg., ( xxjvu 2.3.x) & try to flash it with odin.
Try google & it should come up with some links to the firmware.
If you can't enter download mode try this heimdall-one-click.googlecode.com/files/OneClick.jar
Here is the youtube link
Good Luck Mate!
if everything didnt work you may do it in the hard way that is you turn off your device and take off the battery and sim card and memory card if you have one then you bring a hair dryer and put it on the hottest level then center it between the camera and the speaker for 10 seconds then quickly put the battery back and hold home+low volume+power this will put you into download mode if it didnt work the first time try again and for me , it didnt harm my phone .. i used it when my phone bricked and it didnt enter to download mode nor recovery and didnt have a jig .. hope this would help you ....
NOTE : DO IT ON YOUR OWN RISK
hassanalip21 said:
if everything didnt work you may do it in the hard way that is you turn off your device and take off the battery and sim card and memory card if you have one then you bring a hair dryer and put it on the hottest level then center it between the camera and the speaker for 10 seconds then quickly put the battery back and hold home+low volume+power this will put you into download mode if it didnt work the first time try again and for me , it didnt harm my phone .. i used it when my phone bricked and it didnt enter to download mode nor recovery and didnt have a jig .. hope this would help you ....
NOTE : DO IT ON YOUR OWN RISK
Click to expand...
Click to collapse
(Off topic question) how does this work? And how does a USB jig work? Just wondering
Sent from my GT-I9000 using xda premium
calum96 said:
(Off topic question) how does this work? And how does a USB jig work? Just wondering
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
this is a hardware issue the high temp disturbs the hardware and somehow it takes you into download mode and I swear it worked for me.
the phone reacts on resistors. so if you have a special resistor your phone turns in different modes, e.g. hard reset, schutdown, or download mode.
Thanks
Sent from my GT-I9000 using xda premium
So
I was using saurom v2.. everything was good when i decided to try ics.. i tried to instal tiramislim v2.. got problems rom never installed.
i downgraded back to gb jw4... rooted.. then tried the f4k ics rom...
failed to install it and now i can't even downgrade.. everytime i try my phone just stucks on odin or fails..
any idea?
sorry if its the wrong section, but i need help
Can u get into download mode?
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Can u get into download mode?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
i managed to make it jvu.. then went to make it jw4
now i can't even enter download mode.. screen stopped working or wtf..
Take out the battery for 1min.
Try removing the battery and then try the 3 button combo to enter download mode. I thing Odin failed because when you tried to install F4 it changed partitions and when you wanted to downgrade to jw4 you did not repartition with 512 pit.
When you enter download mode remember to install the 3 file stock rom with 512 pit and repartition checked.
After installing the stock rom before proceeding with jellybean remember to backup your efs folder ( you can search xda dev how to do that)
I strongly recommend going with Cyanogenmod 10 stable. Its very fast and with the latest semaphore kernel runs like a beast.
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Try removing the battery and then try the 3 button combo to enter download mode. I thing Odin failed because when you tried to install F4 it changed partitions and when you wanted to downgrade to jw4 you did not repartition with 512 pit.
When you enter download mode remember to install the 3 file stock rom with 512 pit and repartition checked.
After installing the stock rom before proceeding with jellybean remember to backup your efs folder ( you can search xda dev how to do that)
I strongly recommend going with Cyanogenmod 10 stable. Its very fast and with the latest semaphore kernel runs like a beast.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
after i made it jvu i wanted to make it jw4.. it was doing something else.. i forgot the names now.. and then the screen just went off
removed the battery many times but nothing. i am charging the phone in case it's the battery :/ i closed also odin when i saw it was doing nothing..
i think i did a serious damage on the phone. If it gets fixed i will try cm10.. right now.. nothing :/
I think Odin crashed my phone
because i changed 3-4 custom roms in some hours..
i saw some threads about how to put it back in recovery mode but nothing..
screen is black.. not responding at all : (
I think your battery died in the middle of the flashing process. When you charge the battery does it show the battery indicator charging ?
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
I think your battery died in the middle of the flashing process. When you charge the battery does it show the battery indicator charging ?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
nothing at all..
Then basically your battery died in the middle of flashing process, you can try with another full battery and try to enter download mode by using the 3 button combo. If it does not it means you have to use a USB jig to access download mode. Once you access download mode remember to have a fully charged battery before flashing
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Then basically your battery died in the middle of flashing process, you can try with another full battery and try to enter download mode by using the 3 button combo. If it does not it means you have to use a USB jig to access download mode. Once you access download mode remember to have a fully charged battery before flashing
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
so when the battery dies in the middle of flashing... i can't charge it?
Possibly not, you have to try with a fully charged battery before flashing anyway. I think if you touch the phone while on power and the battery is warm maybe is charging. If there is no sign of life or there is no heat at all maybe is not charging. You still have to try to enter download mode with a fully charged battery, keep trying.
Sent from my GT-I9000 using xda app-developers app
Any news? Luck?
Sent from my GT-I9000 using xda premium
i changed battery with external charger and tried putting it in download mode..
nothing though : /
i don't know what to do
You have to try the dowload mode using an USB jig.
http://forum.xda-developers.com/showthread.php?t=819551
You can't broke this mode by flashing your phone, if an USB Jig don't work, you really have an hardware problem.
my pc makes sounds when i connect the phone.. then the sound that it got dc'ed
i don't think i will find a jig here.. nor i can make one.
i will give it to samsung service center and pay them..
if it gets fixed
1 week and more without a phone lol
Where you're from..? If you're from holland i have a jig for you... if not you can order one from the internet i paid €3,75 for it
GT-I9001 4.1.2 JB by Invendor
same happened to me
i live in India i have the same problem tried repairing my phone but no result.....i gave it to a repairer he tried the riff box repair but nothing happened....and when i am charging the phone it doesn't heats.... if you get something done please update it on this thread, while i'm trying too
i guess i have to find a shop and buy a jig : P
you can order the jig on ebay... i got one for my phone... in continuation of the discussion going on, my phone is bricked as well... nothing is working... neither the 3 combo button or the JIG... also, when i plugin the charger, no indication is showing up... can anyone please suggest what can be done for this?
I checked with Samsung.. they have asked me to get the motherboard replaced and it will cost around 8K...
So the story goes...
After i check that can't unlock my phone under CM 7.2 i Download Stock Firmware for my country, ODIN 4.42 (copper v1.0.ops).
Then put phone in downloade mode in ODIN i get the 9/9, and pull out USB cable...now all magic is happen, i can't start my phone (complete black screen)
Can JIG help whit this or i need JTAG repair...
TIA
borism25 said:
So the story goes...
After i check that can't unlock my phone under CM 7.2 i Download Stock Firmware for my country, ODIN 4.42 (copper v1.0.ops).
Then put phone in downloade mode in ODIN i get the 9/9, and pull out USB cable...now all magic is happen, i can't start my phone (complete black screen)
Can JIG help whit this or i need JTAG repair...
TIA
Click to expand...
Click to collapse
Does it turn on?
Can u boot on download mode ?
Sent from my GT-S5830 using xda premium
SnowPluralism said:
Does it turn on?
Can u boot on download mode ?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Nop, i can't do nothing...presing all buttons, trying presing buttons than put baterry, start odin put usb cable into ace presing button put battery nothing. Just like it's dead.
Did you wait until it said pass on Odin?
Sent from my GT-S5830
brewy said:
Did you wait until it said pass on Odin?
Sent from my GT-S5830
Click to expand...
Click to collapse
Last i remember was..."unpluq or disconnect" serial port
than i unplug usb
Don't no what you have done but it sounds like a hard brick either go to a Samsung service center or find jtag that's the only way to fix it
Forgot to say USB jig doesn't work either
Sent from my GT-S5830
brewy said:
Don't no what you have done but it sounds like a hard brick either go to a Samsung service center or find jtag that's the only way to fix it
Sent from my GT-S5830
Click to expand...
Click to collapse
I will try the JIG, if doesn't help i will go to the VIP (provider) maybe i can get free repair. Phone is under garanty
EDIT: question for the next time, if flashing with odin i can't disconnect phone until is boot in andorid?
OK when you take it don't say nothing about Odin or custom roms etc just say you were updating it on kies then it hasn't switched back on since
Sent from my GT-S5830