Database Develop

Cry for help! D:

I tried to root my G1 from this link..
http://forum.xda-developers.com/showthread.php?t=442480
Made it through the first few steps well, until i finally began to upgrade the image dreaimg or w,e.. It failed on me & now i cannot leave the screen. I remove the battery & turn it on. but when i do it stays in the same spot.. I tried everything & need some help.. ]:
Here is a pic of the screen.. : http://img683.imageshack.us/img683/4355/picture001bk.jpg

Did it start updating, then stop in the middle of it? Did the phone turn off due to running out of battery during the flash? Did you format your card to FAT32, download the proper RC for the original sale location of your phone?
Try pulling the battery at, then removing your SD card, do a long format to FAT32 (whether it is or not) copy the dreamimg.nbh onto the SD card, put the SD card back in the phone, put the battery back in, put it on a charger not turned on for 30 minutes, then take it off the charger...
Now that you have done all that, try booting into boot loader again by holding down the camera and power button until it goes into that screen again and does it's thing.
If this doesn't work, well, good luck since I have no idea from there.

Yes i've tried all of that.. Once i remove my battery it turns on, but as soon as i put it on again it turns on & the same screen appears.. There nothing i can do to go back to the Home screen.. D':
I most likely made a mistake but now i cannot fix this! ]:

SOme onee! please help me.. ]:
Everyone continues to ignore my thread..

have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said

Jose_95 said:
SOme onee! please help me.. ]:
Everyone continues to ignore my thread..
Click to expand...
Click to collapse
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.

ilostchild said:
have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said
Click to expand...
Click to collapse
I tried that combination just now & it wont work either.. ]: I've tried all combinations with buttons i know to try and reset the phone to get away from that uploader thing.. But nothing works..

BTaylor927 said:
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.
Click to expand...
Click to collapse
That screen is the only thing that ever appears on my phone.. ]:I cant take that screen away like i want too.. So it appears instead of the G1 screen..

If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.

pjcforpres said:
If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.
Click to expand...
Click to collapse
So then is there anyway to restart the phone? Like a secret way? & when i connect my phone to the computer when its shut off, it appears on the computer but not completely.. it says that one of the files are not recognized. Damn, this is really a pain.. ]:

So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?

rjgonza said:
So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?
Click to expand...
Click to collapse
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.

akapoor said:
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.
Click to expand...
Click to collapse
I cannot connect it to my computer at all.. Once turning on the phone the only thing that appears is the loader thing.. Whats ADB? how can it help me?

The Search button is your friend.
http://forum.xda-developers.com/showthread.php?t=502010

[Q] Help me pls.. I think I've really bricked my P990

Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...

humblepie88 said:
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
Click to expand...
Click to collapse
Try using SmartFlashTool, download the LG stock ROM (can be found here in XDA forum, i'll help you find the link), flash the .bin and .fls files.

humblepie88 said:
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
...
"Hold the vol+ button and power key before plugging in but the smarttool did not find the com port..."
Click to expand...
Click to collapse
Turn off the phone. Hold Vol-DOWN while plugging it in. Start Smartflash and see the com-ports magically appear.

Follow trymhansen's instructions. He helped me before with my softbricked phone.

I hope you get your O2X back to life! Keep us posted
Best of luck to you!
PS. I also believe you should pull out the battery after turning off the phone in Trym's instructions. Trym correct me if I'm wrong please.

Hi All,
Thanks for your kind replies. I did follow your instruction. Take out the battery (I removed the ext SDcard as well), press and hold -vol and plug in the phone via USB. Afterwhich start up smartflash tool.. still nothing happens and no com ports are found.. The version of smartflashtool that I used is Dec 2010. Do I need to get the latest one and also the LG united drivers installed?
I also tried starting smartflash tool before the sequence.. still the same. BTW.. my OS is Win 7. Is it supported?
Really at my end's wit. Hope I can bring my phone back to life soon and I'm not really bricking it. I heard Samsung phones are not that easy to brick and can get to the recovery mode pretty easily. is it true?
Please help me.. thanks

Hi bros,
Attached are my screenshots from the device manager and smartflash tool... both seems not able to find the phone and allocate a com port. I've tried installing the latest LG mobile driver 3.6 but no help as well

Have you followed instructions as described here http://forum.xda-developers.com/showthread.php?t=1008070 ?
Also, try to attach your phone directly to computer, using usb ports from computer mainboard. I have experienced problems when attaching it via extension usb cord or attaching it to computer case ports. (I hope that you can understand what I have mean to say with usb )

Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...

humblepie88 said:
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
Click to expand...
Click to collapse
launch smartflashtool first, extract the .fls and .bin files, hold down volume at the same time plug in the usb port to your comp. you must see a s/w updating logo in your phone's screen and smartflash should detect your phone. then click start!
Sent using a phone.

Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..

humblepie88 said:
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
Click to expand...
Click to collapse
does the laptop have lg drivers installed?
Sent using a phone.

inflance hotota
mrgian said:
does the laptop have lg drivers installed?
Sent using a phone.
Click to expand...
Click to collapse
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable

humblepie88 said:
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
Click to expand...
Click to collapse
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.

try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help

chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
you got a point there.
Sent using a phone.

humblepie88 said:
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
Click to expand...
Click to collapse
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.

LarsPT said:
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
Click to expand...
Click to collapse
I've tried the recovery via 2 diff laptops and plugging in directly to one of the side USB ports but to no avail as well.. I think I've plugged in the phone correctly but there's no reaction at all/

mrgian said:
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
Click to expand...
Click to collapse
How to enter CWM? I can't even power up the phone and no reaction at all when plugged into USB via smartflash.. the screen remains black. It's liked the whole phone is burned or something... but strange thing is that it can detect APX and asked to install drivers... but after successfully installing the Nvidia boot recovery driver.. the com ports does not get discovered.. What is wrong?

chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
I plugged in the phone with battery but there was no charge logo or whatever.. the screen remains blank.. I'll try to leave it charging and see what happens. But I've remembered there was still about 80% power when this disaster happened and I've taken out the battery since.. so the charge should have remain? Btw.. where can I get this ext3 back.zip and how to use it? thanks

[Q] Galaxy Pop/Mini half hard bricked (can go into a strange mode) Experts Neede

Hi everyone!
Here is the entire list of things I had done before I bricked it. Can some expert please read through and help me? I really need help!!
So as you can read from the title, this phone, the Galaxy Pop/Mini is bricked. It does not turn on at all, even if I press the power key only or the Power+home+vol.down. Needless to say, I have no download mode . The problem started after I flashed the PACman ROM, which didn't turn out that good, so I re-flashed the original firmware using ODIN. It said PASS, but then when it rebooted, the phone got a boot loop. It kept on rebooting again and again. As I have an Xperia Neo V as my primary device, this issue usually meant a wrong kernel to me. So I downloaded "Galpop_kernel_build2" and now when I press the power button or any of the combinations, the screen does not light up. There is no response.
So I tried the Heimdall One Click Unbrick, and it shows me this error:
Is Your Phone Plugged In?
Is It In Download/Softbrick Mode?
If the phone is Plugged In and Everything Is Fine,
Visit the Resolution Center in order to resolve the issue.
So I clicked on the button, it asked me to install 3 things, which I did, no luck. So I was finally going to give up, when I accidently pressed the volume up+ Power+ Home keys. Nothing happened on the screen, but when I connected it to my PC, Windows started installing some drivers! It went well, and even ODIN detected the phone (Yes, there was the Yellow Box), so I quickly tried to flash the original firmware, but it got stuck on "setup connection...". I read somewhere that this was a driver issue so I tried to uninstall and re-install the drivers, no luck.
So now, the phone does not turn on, but goes into this strange mode where it gets detected by ODIN, but cannot be flashed. I'm doomed! Can someone PLEASE HELP!!???

llsiddhantll said:
Hi everyone!
Here is the entire list of things I had done before I bricked it. Can some expert please read through and help me? I really need help!!
So as you can read from the title, this phone, the Galaxy Pop/Mini is bricked. It does not turn on at all, even if I press the power key only or the Power+home+vol.down. Needless to say, I have no download mode . The problem started after I flashed the PACman ROM, which didn't turn out that good, so I re-flashed the original firmware using ODIN. It said PASS, but then when it rebooted, the phone got a boot loop. It kept on rebooting again and again. As I have an Xperia Neo V as my primary device, this issue usually meant a wrong kernel to me. So I downloaded "Galpop_kernel_build2" and now when I press the power button or any of the combinations, the screen does not light up. There is no response.
So I tried the Heimdall One Click Unbrick, and it shows me this error:
Is Your Phone Plugged In?
Is It In Download/Softbrick Mode?
If the phone is Plugged In and Everything Is Fine,
Visit the Resolution Center in order to resolve the issue.
So I clicked on the button, it asked me to install 3 things, which I did, no luck. So I was finally going to give up, when I accidently pressed the volume up+ Power+ Home keys. Nothing happened on the screen, but when I connected it to my PC, Windows started installing some drivers! It went well, and even ODIN detected the phone (Yes, there was the Yellow Box), so I quickly tried to flash the original firmware, but it got stuck on "setup connection...". I read somewhere that this was a driver issue so I tried to uninstall and re-install the drivers, no luck.
So now, the phone does not turn on, but goes into this strange mode where it gets detected by ODIN, but cannot be flashed. I'm doomed! Can someone PLEASE HELP!!???
Click to expand...
Click to collapse
reinstall windows and try again. also try a different computer or laptop.

michal383 said:
reinstall windows and try again. also try a different computer or laptop.
Click to expand...
Click to collapse
I did, I am on a different PC right now, installed all drivers etc. But I just realized... I think I might have flashed the Pop Plus kernel...
Since it is ultimately the low level OS, maybe that is preventing it from starting? Is there a way to forcefully flash a different kernel? :'(
Also, the strange mode that it used to go into is gone now.. I cannot make the PC recognize the phone at all now, and the phone does not power up. So I'm kinda in a doomed position right now..:crying:

The mistake was the kernel flashing. If something is not booiting you need to wipe data/cache. This works with stock ROM too.

ast00 said:
The mistake was the kernel flashing. If something is not booiting you need to wipe data/cache. This works with stock ROM too.
Click to expand...
Click to collapse
I know, but the problem is, I cannot go into Download Mode or Recovery Mode. The battery is charged, but even after pressing the Power button or any of its combinations, the phone just doesn't turn on! No response what-so-ever.
Any suggestions?

Then no idea. I thought maybe you don't know where was the mistake so that's why I wrote it.

SSC. Simple right ?

F4uzan said:
SSC. Simple right ?
Click to expand...
Click to collapse
What is SSC? I have no idea about this.. Can you please explain what to do? :fingers-crossed:

llsiddhantll said:
Hi everyone!
Here is the entire list of things I had done before I bricked it. Can some expert please read through and help me? I really need help!!
So as you can read from the title, this phone, the Galaxy Pop/Mini is bricked. It does not turn on at all, even if I press the power key only or the Power+home+vol.down. Needless to say, I have no download mode . The problem started after I flashed the PACman ROM, which didn't turn out that good, so I re-flashed the original firmware using ODIN. It said PASS, but then when it rebooted, the phone got a boot loop. It kept on rebooting again and again. As I have an Xperia Neo V as my primary device, this issue usually meant a wrong kernel to me. So I downloaded "Galpop_kernel_build2" and now when I press the power button or any of the combinations, the screen does not light up. There is no response.
So I tried the Heimdall One Click Unbrick, and it shows me this error:
Is Your Phone Plugged In?
Is It In Download/Softbrick Mode?
If the phone is Plugged In and Everything Is Fine,
Visit the Resolution Center in order to resolve the issue.
So I clicked on the button, it asked me to install 3 things, which I did, no luck. So I was finally going to give up, when I accidently pressed the volume up+ Power+ Home keys. Nothing happened on the screen, but when I connected it to my PC, Windows started installing some drivers! It went well, and even ODIN detected the phone (Yes, there was the Yellow Box), so I quickly tried to flash the original firmware, but it got stuck on "setup connection...". I read somewhere that this was a driver issue so I tried to uninstall and re-install the drivers, no luck.
So now, the phone does not turn on, but goes into this strange mode where it gets detected by ODIN, but cannot be flashed. I'm doomed! Can someone PLEASE HELP!!???
Click to expand...
Click to collapse
It happens with me too when i flash diff kernel for overclocking and it's bricked i've tried almost every steps to unbrick even jig doesn't work anything so i given it to repair he said that reboot ic is gone he changed it and my phone back to use !

llsiddhantll said:
What is SSC? I have no idea about this.. Can you please explain what to do? :fingers-crossed:
Click to expand...
Click to collapse
Samsung Service Center
-------------------------------------
Your Mini life was in this place.

F4uzan said:
Samsung Service Center
-------------------------------------
Your Mini life was in this place.
Click to expand...
Click to collapse
Oh yes..I guess I'll have to go there.. BTW, what should I say? My phone is still in warranty, but I don't have the papers etc right no, since I'm in college.
I read somewhere that they will change your motherboard for free if in warranty, but how much would it cost? I was thinking of telling them that Kies did this

Zafar7777 said:
It happens with me too when i flash diff kernel for overclocking and it's bricked i've tried almost every steps to unbrick even jig doesn't work anything so i given it to repair he said that reboot ic is gone he changed it and my phone back to use !
Click to expand...
Click to collapse
As I asked someone else too, how much do you think it would cost if I don't have the warranty papers right now? It still is in warranty though..
And what did you tell them that convinced them that you were innocent?

I also had a problem where i had to get my motherboard changed when i asked the samsung people they said it'll cost Rs. 4000 for changing the motherboard so it'll be better if you find your warranty papers and don't worry just tell them that the phone's not working don't tell them about the rom flash stuff they'll repair it for free if you have your warranty papers..
Sent from my GT-S5570 using xda premium

arjunraina7 said:
I also had a problem where i had to get my motherboard changed when i asked the samsung people they said it'll cost Rs. 4000 for changing the motherboard so it'll be better if you find your warranty papers and don't worry just tell them that the phone's not working don't tell them about the rom flash stuff they'll repair it for free if you have your warranty papers..
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
That's the thing, I can't have the warranty papers because I am in college (far from home ), but I'll see what they do, I am going to the repair center today!

Yeah but its gonna cost you a lot of money.. :sly:
Sent from my GT-S5570 using xda premium

arjunraina7 said:
Yeah but its gonna cost you a lot of money.. :sly:
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Yep, they asked me for 4,000.. That's almost half the price I bought the phone! I think I'm going to wait till December.. I'll be home then!
Thanks everyone for replying and helping!

llsiddhantll said:
Yep, they asked me for 4,000.. That's almost half the price I bought the phone! I think I'm going to wait till December.. I'll be home then!
Thanks everyone for replying and helping!
Click to expand...
Click to collapse
Yeah... I told ya you should get your warranty papers....:thumbup:
Sent from my GT-S5570 using xda premium

can u please explain???
Zafar7777 said:
It happens with me too when i flash diff kernel for overclocking and it's bricked i've tried almost every steps to unbrick even jig doesn't work anything so i given it to repair he said that reboot ic is gone he changed it and my phone back to use !
Click to expand...
Click to collapse
the same thing happened to me too..
the fun part is that this WAS my brother's phone(i mentioned WAS for the phone's been dead for a week )
can u please explain what did the SSC guy told you in detail???

unbricking mini/pop
try deleting all ur data on ur phone - ur android, data, etc....just factory reset it and then try flashing using odin!!!! if that also not works then use clockwork mod and restore backed up firmware on ur phone.

-_- he said he can't enter recovery or any other mode
Sent from my GT-S5570 using xda app-developers app

[Q] Galaxy Note turns on but black screen.

maybe someone here can help? the other day i was using facebook on my phone and it died, so naturally i put it on the charger not thinking much of it, come back later and try and turn it on. it makes noises, vibrates, and the two buttons at the bottom light up but nothing come up on the screen. its just black. it wasnt rooted and was running on stock, although im not sure what version, i think gingerbread. ive tried pulling the battery many times, and tried getting it to bootin into the recovery stuff. any help on this would be much appreciated.

try this out and let me know
Tupperwear said:
maybe someone here can help? the other day i was using facebook on my phone and it died, so naturally i put it on the charger not thinking much of it, come back later and try and turn it on. it makes noises, vibrates, and the two buttons at the bottom light up but nothing come up on the screen. its just black. it wasnt rooted and was running on stock, although im not sure what version, i think gingerbread. ive tried pulling the battery many times, and tried getting it to bootin into the recovery stuff. any help on this would be much appreciated.
Click to expand...
Click to collapse
ok at this point ,
1)try powering on yr phone continously holding the power button for about 8-10seconds...
2)second option, try putting yr phone into both download and recovery mode using he 3buttons...
3) if still not turning off try and flash a stock rom of yr region using pc odin in download mode.
this will get yr phone to work incase if its an os crash.

shabhrish said:
ok at this point ,
1)try powering on yr phone continously holding the power button for about 8-10seconds...
2)second option, try putting yr phone into both download and recovery mode using he 3buttons...
3) if still not turning off try and flash a stock rom of yr region using pc odin in download mode.
this will get yr phone to work incase if its an os crash.
Click to expand...
Click to collapse
I tried all of these except Odin since I can't get to download mode. Nothing came up on the screen

then...
Tupperwear said:
I tried all of these except Odin since I can't get to download mode. Nothing came up on the screen
Click to expand...
Click to collapse
Try powering on the phone without sim card n sd card

shabhrish said:
Try powering on the phone without sim card n sd card
Click to expand...
Click to collapse
Tried that as well and still get the same result. :/

seems like hardware failure, better get it fast to the nearest service center.

motherboard...
Tupperwear said:
Tried that as well and still get the same result. :/
Click to expand...
Click to collapse
Then u might ve lost yr motherboard.
If yr still under warranty u can get the motherboard change free of cost from sammy service centre.

Soft - bricked my xperia T, need HELP (SOLVED)

Hi guys, this is my first time posting here in xda,
I have a problem with my xperia T, it boot loops (starts up by showing the manufacturer logo, then shuts down, then starts up again)
and i didnt unlock my bootloader, and i didnt install CWM, no backups either
I only rooted the phone for the sake of chainfire, and when i installed it, it asked me to restart the phone and from there on the problem started.
I tried fastboot mode, but after 3-4 secs, the blue light disappears and the phone starts boot looping again,
I need help from you guys,
thanks y'all in advance

Use pc companion to restore your phone
Sent from my LT29i using xda premium

SammiSaysHello said:
Use pc companion to restore your phone
Sent from my LT29i using xda premium
Click to expand...
Click to collapse
How do i do that? Sorry, im a newbie..
I think the pc companion cannot restore my phone since it cant recognize it. It starts up, then it shuts down after 3-4 secs
Also i dont see a back up and restore menu on my pc companion,

hawejiedm said:
How do i do that? Sorry, im a newbie..
I think the pc companion cannot restore my phone since it cant recognize it. It starts up, then it shuts down after 3-4 secs
Also i dont see a back up and restore menu on my pc companion,
Click to expand...
Click to collapse
then download the xperia T firmware, and use flashtool to flash the ftf onto your phone

Look in the all in one thread, there you'll find everything you need.
Sent from my LT30p, 4.1.2 stock, DooMKernel v5,root access, unlocked bootloader.

SammiSaysHello said:
then download the xperia T firmware, and use flashtool to flash the ftf onto your phone
Click to expand...
Click to collapse
the flash tool ended and it says "please unplug and start your phone" but my phone does not start at all, as i keep pressing the power button
a red light keeps on blinking,is that normal?

hawejiedm said:
the flash tool ended and it says "please unplug and start your phone" but my phone does not start at all, as i keep pressing the power button
a red light keeps on blinking,is that normal?
Click to expand...
Click to collapse
I would think that it would be the battery? give it a 10 minute charge and see if it starts

you do not need to turn your phone on for pccomapnaion to work.
Run pccompanion and run the software update and choose repair.
Only connect the phone when it prompts you

SammiSaysHello said:
I would think that it would be the battery? give it a 10 minute charge and see if it starts
Click to expand...
Click to collapse
Thanks!! now my phone booted up ) i knew i came to the right place,
i'll hit the thanks button