I began to have a lot of force close issues on Revolt 1.3 today, so I was going to just Wipe Data. It began to do its thing. Then suddenly I could barely catch it, but I seen some kind of error then CWM restarted itself. Please help me out on this.
blakec432 said:
I began to have a lot of force close issues on Revolt 1.3 today, so I was going to just Wipe Data. It began to do its thing. Then suddenly I could barely catch it, but I seen some kind of error then CWM restarted itself. Please help me out on this.
Click to expand...
Click to collapse
Its ok, that's what it does
Sent from my VS910 4G using xda premium
Okay awesome thanks for your help!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Related
WOW! HOLY CRAP THIS PLACE IS DEAD! Its been a while since I read around these Zio places. Yup, my ol Zio still bootlooped (its around here somewhere). I tried all the "guides" n zip's and skd's and all that other.....stuff, its koo gathering and installing stuff and gettin that lil rush of hope, but then one lil thing goes wrong or ain't in the step-by-step guied, BOOM- all bad, and nobody's around all of a sudden. Alot of HERE, TRY THIS POST FROM SO N SO (not for the Zio), GO TO BLAHBLAH.COM install that n profit (evil setup to rom someone's phone AND wipe it clean), BUT ITS ALL MY BAD, NEWBIE like me shouldn't mess with roots n roms. Don't get me wrong, if I can find somebody that would fix it for cash, id go back to my zio and chuck this HALLWIE A2 (whatever its called) to a dev. Well, I'm probly gona get smashed for posting this. DEEEEP BREATH........K, I FEEL BETTER NOW.
Now I'm soo broke I cant even pay attention!
What you need help on? Bootloop fix? I can help you. Pm me on the details. Could you still get into faatboot or recovery? What service sprint or cricket!?
Sent from my Zio using XDA App
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Not sure where it is but there was a fast boot zip of launcher apk. If you boot your phone into fast boot and cwm copy the zip to the phone and then flash the zip to your Zio it should resolve the issue
Sent from my Zio
Krsmqn said:
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Click to expand...
Click to collapse
I can make a launcher apk. flashable zip for ya,just let Me know.
Sent from my LG-P509 using xda premium
openZIO Rom issue
Hi, I just installed the openZIO 2.1.2 ROM. Everything worked fine, but after rebooting and going through the initial set up (i.e. the google user setup blahblah) the VTL Launcher continually force closes and I can't do anything but go back and recover my original boot.img has anyone else had this kind of issue? Any possible fixes? Any help would be appreciated, I know not to many people are in using the Zio forums anymore... but yeah.. Thanks in advance
Try Reflashing again
Sent from my LG-P509 using xda premium
I've actually already done that, and it's still doing the same thing. I've deleted and re-downloaded the ROM, and re-flashed it to my phone, and still having the same issue. VTL Launcher just continually force closes, and it sucks cause I've been waiting months to get to install the ROM cause I couldn't afford a new USB cord. I've read so much on this ROM and everything for the Zio and was excited to actually be able to overclock my phone, and get some pretty good performance boosts out of it. Now I got one, and can't get it to work.. what a sad day
Could you explain your steps when flashing?
Sent from my LG-P509 using xda premium
well I first move the .zip to the sd, then power down and boot up CWM, and "install from SD card" and once it's finished flashing, I reboot the phone. when it comes back up my kyocera logo comes back up and it takes me through the first-boot programming (google sign-in) and once I input my un/pw and sign in, it tells me that VTL had an error and must hit force close. and once I hit force close it continues to come up saying the same thing over and over again. so I rebooted my phone, still the same thing. SO I go back through and flash it back to my original boot.img. I have gone through and completely deleted the openZIO 2.1.2.zip file and re-downloaded it, and gone through the same steps to see if maybe it was just a bad file somehow. But to no avail, still having the same issues.
After you boot into cwm : wipe cache partition, then go into mounts and storage, format: system, data, cache :then go into advanced and wipe dalvick cache.
Now flash rom
Sent from my LG-P509 using xda premium
Ok just went through with what you had mentioned, and still getting the same results. "Sorry! The application VTL.Launcher (process android.process.acore) has stopped unexpectedly. Please try again. with the only option to force close. As soon as I force close, the same message pops up
Have you tryed flashing my rom?
I would try that, and see what happens.
You can always push a launcher with adb or Droid commander.
Sent from my LG-P509 using xda premium
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
XCmaster said:
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
Click to expand...
Click to collapse
Im outta suggestions, I think you might have a hardware problem, but can't be for sure on that.
I've never heard of anybody having that problem, let me know if you get the issue resolved
Sent from my LG-P509 using xda premium
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
XCmaster said:
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
Click to expand...
Click to collapse
Was your phone acting like that before you flashed openzio?
Sent from my LG-P509 using Tapatalk 2
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
XCmaster said:
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
Click to expand...
Click to collapse
I guess then its probably not a hardware issue.. hmm.. its almost Like the roms your flashing are getting corrupted some how.
Sent from my LG-P509 using Tapatalk 2
hmm.. .well maybe I'll format my sd and do a factory reset on the phone first, then try to flash the rom?
Need help on how to resolve this one issue, my tab keeps force closing market and the you tube app. I had honeycomb 3.1 now i flashed to 3.2 all stock. But problem still exist. Any solutions???? Has any1 experienced this.
Sent from my GT-N7000 using Taptalk
Have you tried to clear data on these 2 apps ? Try updating market to the latest as well (3.4.4)
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Worst case scenario you could always do a factory data reset. settings/privacy/factory data reset. You will be starting from scratch.
Hi.
Am using Motorola Milestone (A853) running on Cyanogenmod 7.
Am having a telephony problem since few days and my mobile frequently is having this error and asking for a reboot. Error image is attached below.
I have installed Vulnerable recovery, Open recovery (2nd boot).
When I had this problem, I reinstalled open recovery, wiped dalvic cache, external partition cache but still am getting this error.
Please help me to fix this.
Thank you.
Sent from my Milestone using xda app-developers app
Most of the time it is caused by having the 2.1 BPSW (baseband processor software) instead of the 2.2
I recommend flashing these two files (bpsw and devtree) just to be sure.
Good luck.
I have applied the updates you mentioned. Will check if my mobile if i gives or not the error again. Will post if it is fixed.
Thank you.
Sent from my Milestone using xda app-developers app
Erovia said:
Most of the time it is caused by having the 2.1 BPSW (baseband processor software) instead of the 2.2
I recommend flashing these two files (bpsw and devtree) just to be sure.
Good luck.
Click to expand...
Click to collapse
After flashing those files i didn't had problems for two days. But am again getting the same error. How do I solve it??
Sent from my Milestone using xda app-developers app
Sorry, but I don't have any more information regarding this problem.
( I know this problem occured even with the stock roms, but they rebooted the phone immediately and all unsaved data lost. )
Erovia said:
Sorry, but I don't have any more information regarding this problem.
( I know this problem occured even with the stock roms, but they rebooted the phone immediately and all unsaved data lost. )
Click to expand...
Click to collapse
I think you have installed CM 9.1 in your Milestone!
Can you please give me a feedback about the performance and usage of milestone on CM 9.1!
Thank you
It works great. I'm not saying it is as speedy as on a newer phone, but most of the time its okay. If it slows down, I just restart the phone and the problem is solved.
I recommend you to try it out for yourself. I also recommend to change the stock launcher.
Erovia said:
It works great. I'm not saying it is as speedy as on a newer phone, but most of the time its okay. If it slows down, I just restart the phone and the problem is solved.
I recommend you to try it out for yourself. I also recommend to change the stock launcher.
Click to expand...
Click to collapse
Ya sure I will try once. Thank you for the feedback!
I was so excited when I saw this ROM posted! I got it all working wonderfully, until I restarted my phone, and it wouldn't get past the Exhibit screen. Pulled the battery, did another wipe and re-flashed the ROM, got it going again, but the same problem upon restart.
Any ideas? Anything I could have missed?
violentmind said:
I was so excited when I saw this ROM posted! I got it all working wonderfully, until I restarted my phone, and it wouldn't get past the Exhibit screen. Pulled the battery, did another wipe and re-flashed the ROM, got it going again, but the same problem upon restart.
Any ideas? Anything I could have missed?
Click to expand...
Click to collapse
Which recovery are you using, because you will need at least 6.0.4.5.
Edit: 6.0.4.4 or greater.
That's not a recovery problem, it happens to me when I restore all my apps, reinstalled them manually and problem is gone
Sent from my SGH-T679 using XDA Premium 4 mobile app
I'll give that a try next weekend and see if it helps. Thanks for the tip!
For jfbs I'm running cwm 6.0.4.5
I agree with taz. After reading the op again I see that I parsed the words too liberally.
phone wont work
when i flashed the latest build of this rom it worked fine up until i got done with the setup! when i clicked finish setup a message pops up and says the the system ui force closed then the set up wizard kept force closing! any suggestions?
kirk_harris said:
when i flashed the latest build of this rom it worked fine up until i got done with the setup! when i clicked finish setup a message pops up and says the the system ui force closed then the set up wizard kept force closing! any suggestions?
Click to expand...
Click to collapse
Will you send @...Awesome... a pm since I don't think you're able to post yet in the dev. section, or I can repost your question in his thread if you'd like, unless someone knows the answer?
jfbs said:
Will you send @...Awesome... a pm since I don't think you're able to post yet in the dev. section, or I can repost your question in his thread if you'd like, unless someone knows the answer?
Click to expand...
Click to collapse
it doesnt matter just post it and message me and let me know what anyone says but im on a galaxy exhibit 4g i downloaded cm11
Sounds like a dirty flash, wipe system 3+ times and try again
Sent from my SGH-T679 using XDA Premium 4 mobile app
can someone help me asap please. about an hour ago i was using my phone normally, locked the screen with the button, then a couple minutes later tried to unlock the screen to check my browser but it wouldnt turn on. it was like it turned off. the only way to get it back on was by doing the power plus vol down to go into bootloader. i did that and rebooted everything worked normally on the reboot. i sent a text and locked it. a few minutes later i went to unlock it again to check something but it wouldnt turn on again. this time on the reboot nothing worked. it would reboot and just sit on the screen where it says Viper ROM wtih the red V flashing. i went into recovery and reflashed the rom, now it loaded up, did the "updating apps "x out of xxx" and after that it went to "android is upgrading...starting apps" with the spinning circle on the left. it has been stuck on this screen for about 5 minutes now and the circle is still spinning. what should i do?
edit: ive been on 1.1.0 viper rom for months now, since it first came out and havent had problem up until today. havent messed with any settings or anything. i really am trying to avoid doing a system wipe cause i have important texts i cant lose.
This would be better suited and more likely to be adressed in Q/A or better yet the Viper Rom thread.
Sent from my HTCONE using XDA Premium 4 mobile app
drlzanej said:
This would be better suited and more likely to be adressed in Q/A or better yet the Viper Rom thread.
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry about that, i posted in both those places but got no responses so i tried here. really trying to find some help asap cause i havent been able to use my phone for a few hours now
Greetings,
I moved this to Q&A and I'll be deleting the duplicate.
Thanks,
BD619
^thank you sir!
can anyone help me with an answer to this question. if i backup the data portion in recovery mode, do the wipe in team win recovery, then reflash the rom. can i restore just hte data only and have my text messages back since it would be the same rom i was running before?
i am having the same issue again after i factory reseted and reinstalled the rom. can anyone help?