[Q] odin not recognizing my captivate - Captivate Q&A, Help & Troubleshooting

I have a Samsung Captivate and its running cyanogenmod 7. I notice the bad battery life so i want to flash back to stock. I usually use odin but with this rom odin is not recognizing the phone. I put my phone in download mode and gadget serial pops up at the bottom and thats it. Now my phone isnt getting past the att logo. idk what to do for odin to recognize my phone. I have all the captivate drivers. Does it has something to do that my phone thinks its a nexsus S now.
PLEASE HELP

Yes your missing the correct drivers. Check for AOSP or Google usb drivers. CM7 is not based on the SGH-i897 so the drivers wont recognize your phone.

where can i find that. i think i did all of that. today i downloaded android sdk and something google revision 4.some site told me to do that but nothing working. my phone is stuck at the att logo, wont go in recovery, and odin wnt recognize the phone in download mode. idk what to do !

ballkidray said:
where can i find that. i think i did all of that. today i downloaded android sdk and something google revision 4.some site told me to do that but nothing working. my phone is stuck at the att logo, wont go in recovery, and odin wnt recognize the phone in download mode. idk what to do !
Click to expand...
Click to collapse
First, uninstall all the captivate-related USB drivers you currently have installed (best to start clean), and reboot your computer.
Then, try doing the instructions on this page. Once you have those drivers installed, reboot your computer and then hook your phone up again. That should (in theory) get you going.

my phone only going in download mode. i tried all that. every time i connect the phone in download mode it says gadget serial

jmtheiss said:
First, uninstall all the captivate-related USB drivers you currently have installed (best to start clean), and reboot your computer.
Then, try doing the instructions on this page. Once you have those drivers installed, reboot your computer and then hook your phone up again. That should (in theory) get you going.
Click to expand...
Click to collapse
Just install SDK and you will have the drivers. CM7 is based of Nexus S, SKD has those drivers.

then ill be able to use odin ?

I think I have the same problem now..Odin not recognizing my phone..
Tried different cables and different computers with no luck..
Did you guys find a way to fix it?

Related

Please help...big problem....

Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Did you flash anything to it or root it?
riwarren said:
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Click to expand...
Click to collapse
Hi Rick. Try to re-install samsung usb drivers. during this time, take out the battery from the phone. once finished installing the drivers, put back the battery into the phone. Go into downloading mode. Fire up odin, put in the necessary firmwares + pit files. Once done, then CONNECT your phone to the usb port of your computer.
Hope it's okay.
Edit: Let's hope that it is the computer usb drivers are corrupted. Alterntively, if you still can't do it, try it on another pc.
Nope. I was rebooting it to flash XXJPC to it, but couldnt do so because it was saying that USB message and wouldnt detect it. So I went into recovery, did a factory reset, and now it wont boot.
Another computer does the same thing *tears*
*BUMP*
Lets try a different route. I will pay a generous sum of money to anyone who offers to and does manage to fix this for me?
rick, looking at this, if your usb is not recognised, it is either the pc or the phone usb port might be damaged.
if it is a hardware issue, then use the bounty to get it fix.
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
richan90 said:
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I can get into download mode just fine.....my pc just doesnt recognize the usb device. tried 3 differente pc's, 2 running win7 and one running xp.
Did you install usb drivers on each of the machines?
Sent from my GT-I9000 using Tapatalk
I installed the samsung USB driver executable. and I also tried to use those drivers that it installs to manually update the "unknown USB device" in device manager, but they won't take.
Try uninstalling all drivers, then stick a MicroSD in your phone before plugging it into the usb.
Assuming you have Samsung Kies in your PC, try to upgrade it at 1.5.1.10074_45.
How long do you wait the boot?? The first boot after flash is very long, wait at least 5 minutes with flashing "S".
I did not just flash anything. My phone got really hot and laggy (as I was using it while charging it via USB port) and so I rebooted phone in an attempt to resolve the lag. when I did, it would not go past the WHITE Samsung Galaxy S I9000 screen, does not get to the flashing S screen.
bump
please anyone able to help?
riwarren said:
bump
please anyone able to help?
Click to expand...
Click to collapse
if i understood you correctly, you have two separate problems:
a) your phone does not boot up
b) your phone is not recognized by any computer when plugged in
could be a coincidence, but probably is not. i'm guessing your bootloader got screwed up somehow. if it is a coincidence, it could be that your usb port on the phone is effed, or your usb cable is dead. try first using a different cable and see if your phone can be recognized by any computer. perhaps then you can go into download mode and reflash.
also, have a look at this post, might help you (although, if your usb is effed, there's not much point in trying any solution that involves your phone being connected to a computer): http://androidforums.com/780720-post3.html
EDIT: also, have your tried the obvious stuff, like pulling battery?
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
That post you linked, is worth a try. But its for a motorola.....Where do I get my SGS bootloader to use instead?
ohh you were implying to try to use the motorola usb drivers?
bouzoubaa said:
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
Click to expand...
Click to collapse
I never said anything about a white screen. and I am not uneducated on flashing SGS, or using Odin. Far from it. My phone was first showing USB symbol when it wasnt plugged into USB port, then phone started running really hot while charging and got really bloated like it was overheating. So I rebooted and its now force closing at the first boot animation. I can get into download mode and recovery, but will not recognize in any of the 3 computers all running different versions of windows on them, with either of my USB cables that I tried.

Need Odin3 1 click/stuck on boot screen

So I flashed my phone to Phoenix and was going wonderfully. Flew into St. Louis from Oklahoma and the phone froze up. It's now stuck on the AT&T boot screen. Occassionally after doing a battery pull and turning it on, the Phoenix boot screen will come up and I've gotten it to the lock/unlock screen but is unresponsive to touch.
Occassionally it even has what almost looks like colorful static on the screen. So now I'm in a completely different state without my home laptop for a week with the Odin3 1 click and am unable to find a download link for it.
Help would be appreciated. I was hoping to get the phone into recovery to try and flash back to stock or reflash Phoenix but it just stays stuck on the AT&T boot screen now.
remove battery, put battery back in, hold up+down vol buttons, plug in usb.
you'll be at download mode, then use odin.
Chillyw said:
remove battery, put battery back in, hold up+down vol buttons, plug in usb.
you'll be at download mode, then use odin.
Click to expand...
Click to collapse
Do you have an Odin download link? The Odin link on the site isn't good anymore and google isn't helping
here's an alternative link I've used:
http://www.mediafire.com/?0w2y31maz8mdom4
I appreciate the help so far and the Odin link. I managed to get Odin downloaded. I managed to get my phone in download mode. However, Odin is not registering that there is any phone. Normally I'd see a COM but nothing is showing up.
I started by running Odin.
Then got my phone in download mode.
I can't get any farther.
Do you have the drivers installed on your PC ? I also read somewhere where you have to have the latest net frame work as well...If you do...you might have a bad usb cord...and here in St.Louis..there are a lot of AT&T stores you can get one..
Mac
Well, on the original thread that had the link for Odin has the 32/64 Samsung drivers. I downloaded the drivers zip file to the desktop of the laptop.
One thing I find strange is usually when I plug in the phone to my laptop with the USB cable, the option to view files, etc pops up. It is not on this laptop.
kiltedthrower said:
Well, on the original thread that had the link for Odin has the 32/64 Samsung drivers. I downloaded the drivers zip file to the desktop of the laptop.
One thing I find strange is usually when I plug in the phone to my laptop with the USB cable, the option to view files, etc pops up. It is not on this laptop.
Click to expand...
Click to collapse
Did you install the drivers then ? Sometimes my wife's Samsung laptop does that..and not install anything going to the desktop..If everything is loaded correctly..you 2 drive pop up windows should open..
Also (I'm sure it is) make sure usb debugging is checked on your phone..
Sometimes the most simplest things keeps things from working correctly..
Phone unplugged..in normal mode..usb debugging checked..do not mount phone..
Close Odin
Open Odin
Plug phone in
Put phone into download mode...click start...not master clear...
Mac
Odin is also finnicky about USB ports. If you are on a desktop machine, try using one in the back instead of the front, or if you have multiple sets, try using a different one. I've had Odin not recognize certain USB ports but recognize others before.
Finally, I suspect you already know this, but for sanity's sake make sure you start both the PC and phone up fresh after reboots, open Odin, then connect the phone. Connecting the phone first breaks Odin.
Mac11700 said:
Did you install the drivers then ? Sometimes my wife's Samsung laptop does that..and not install anything going to the desktop..If everything is loaded correctly..you 2 drive pop up windows should open..
Also (I'm sure it is) make sure usb debugging is checked on your phone..
Sometimes the most simplest things keeps things from working correctly..
Phone unplugged..in normal mode..usb debugging checked..do not mount phone..
Close Odin
Open Odin
Plug phone in
Put phone into download mode...click start...not master clear...
Mac
Click to expand...
Click to collapse
Plug the phone in after it is in download mode, otherwise odin might not see it.
Sent from my SGH-I897 using XDA App
skatcat31 said:
Plug the phone in after it is in download mode, otherwise odin might not see it.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I know...but I have had to do it this way on a couple of times..and let it go into download when it was hooked up already..It's strange..but it worked at that time..after getting the drivers loaded for the first time on the wifes laptop..
Mac
What OS are you running? Are you explicitly starting odin in administrator mode (right-click->run as administrator)?
Okay, so I switched USB ports and it suddenly recognized and it started to download drivers. But it was listed as a gadget Serial and no drivers found. Geez this would be so much easier if I was at home where the laptop is set up with everything instead of being several states away.
Okay, so apparently I do not have the correct drivers installed. I really appreciate all the help so far. At this point, should I just google Samsung Captivate drivers or does someone have a link handy?
I can't get to my debugging as the phone stays on teh AT&T boot screen. I did have it enabled before I left OKC though.
I've gotten teh Samsung modem software successfully installed.
opcow said:
What OS are you running? Are you explicitly starting odin in administrator mode (right-click->run as administrator)?
Click to expand...
Click to collapse
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
kiltedthrower said:
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
Click to expand...
Click to collapse
OS as in, what OS is your DESKTOP/LAPTOP running?
and....you need to EXTRACT Odin from the zip file, and run it as administrator
kiltedthrower said:
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
Click to expand...
Click to collapse
O_O You blew my mind.
Windows 7 is the OS and I finally got Odin extracted and running as administrator
opcow said:
O_O You blew my mind.
Click to expand...
Click to collapse
I know. Flying from OKC to St. Louis and then from St. Louis to Baltimore with a several hour layover has me exhausted and not thinking clearly.
I did manage to reboot it and Phoenix came up. All drivers were showing ready except for ADB and then the phone shut down and ADB said phone was unplugged.
I feel like I'm making headway but just not there.
And why is it I'm staying in an expensive hotel and you still have to pay for net? Geez
I downloaded the 64bit drivers. Ran the exe file.
Extracted Odin and have run it as an administrator
Put the phone in download mode.
Odin is still not seeing anything.
NM....pop up box just said taht device driver software not successfully installed. I think I'm going to hit my head against the wall for a bit.

Phone Stucked At "At&t World Phone Screen"

I have Cognition V4.5.3
Im A Noob At This... Tried Ti Flash A Kernel With [APP] SGS Kernel FLasher
When I Rebooted My Phone Its Just Stuck At The Boot Screen...
Does Not Want To Go In Recovery Mode... Just Download Mode....
But Heimdall Does Not Recognize My Device...
What Can I Do? I Need To Get My Phone Back, Since Its A Gift
Thanks...
and i only have a mac... =/
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Try Odin 1 Click. You'll find it on here somewhere. It wil take you back to stock 2.1 Eclair. Then you can READ ABOUT flashing other ROMs and proceed from there.
bertito2580 said:
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Click to expand...
Click to collapse
im sorry but most of us can't even help you IF we want to The users of windows based PC's are greater in this forums compared to Macs. if there is drivers for mac, are they installed?
Since you only have a Mac, I would suggest installing Windows through Boot-Camp (included in Mac OSX) on a different partition. I read Galaxy S doesn't have drivers support for Mac OSX Leopart or later, not entirely sure if its true though, but I do have a MacBook Pro and had no success in finding a way to connect my phone to it by USB... Good thing I had a regular old Windows PC Desktop.
Then as Jack Man said, use Odin 1-Click found here
http://forum.xda-developers.com/showthread.php?t=731989
to reset your phone completely to factory settings, relatively simple to do as long as you read the instructions on that post. =)
Well since you only have a Mac and hiemidal is not see your phone i think your only option is to find a friend with a PC and give the Odin 1 click a try.
i ask my aunt for her pc,
Windows Vista 32-Bit
Downloaded And Installed The Drivers
Using Odin3 One-Click
I Put My Phone On Download Mode With The 3keyCombo
And The PC Says"USB Device Not Recognized"
Im Just Gettind Pissed And Stressed
It's My Only Phone.
What Can I Do To Fix This?
Also Tried Running Odin As Administrator... And NOthing...
bertito2580 said:
Also Tried Running Odin As Administrator... And NOthing...
Click to expand...
Click to collapse
Sir, just in case, did you reboot after installing drivers and BEFORE you tried connecting the device? Also, did you check if Odin detected your device when its connected in Download mode?
yes, and thats what in trying to do, to get odin to detect my phone in download mode...
Ok, is your phone detected by the operating system? If it does, then try using this other Odin thread instead, this one however will restore it to Stock Samsung Galaxy with 2.3 Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1127249
Don't have to follow the rest of the instructions to root it just in case, but see if that version of Odin detects your phone.
actually thats the problem... windows vista doesnt recognize my device, either my mac... is there a solution to my phone or not? please help
OMG please help ((
I've Installed Captivate Drivers
Also
Galaxy S General Drivers
But When I Put My Captivate On Download MOde It Just Says
"USB Device Not Recognized"
One of the devices attached to this computer has malfunctioned and
Windows does not recognize it.
Are you sure it goes in to Download Mode (little android with a shovel)? Also have u tried different usb ports?
Like the above said, are you sure you are in download mode?
What USB port are you using if ots a desktop computer. There are known issues using front usb, plug into the usb on the back of the tower.
Also, are you sure odin doesnt see it? I know windows doesnt like it, but start odin, put phone in download mode, connect to pc. What does odin show? Any connected devices?
Sent from my GT-I9000 using XDA App
yes, im sure its on download mode and tried all the ports...
Im gonna try on another pc
to see if its the pc

Q: Comp not recognizing hard bricked in download mode

My phone was hardbricked when i screwed up with the latest Serendipity install. It boot loops at the white AT&T world phone screen. I am unable to get it into download mode with out a jig. However, once i do have it in download mode, my computer will not recognize the phone. It keeps viewing it as an unknown device.
I dont know if this is related to it not showing up using Odin 3 one click downloader. Either way, i need to get it back to stock.
I have the drivers already, in fact ive reinstalled them once or twice trying to get this to work, any ideas?
That's not a hard brick. Search the already existing threads in the forums, of which there are many. No need to start another thread on it. Try a different USB port on your PC, make sure you're running Odin as an administrator before you put the phone in download mode and plug it into your PC.
Sent from my GT-I9000 using Tapatalk
Rhiannon224 said:
That's not a hard brick. Search the already existing threads in the forums, of which there are many. No need to start another thread on it. Try a different USB port on your PC, make sure you're running Odin as an administrator before you put the phone in download mode and plug it into your PC.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
sorry for not searching.
as for my problem. ive tried multiple ports and im running odin in admin mode. still no luck
icanhearpudding said:
sorry for not searching.
as for my problem. ive tried multiple ports and im running odin in admin mode. still no luck
Click to expand...
Click to collapse
Have you tried installing drivers and then reinstalling drivers manually from designgears thread in dev?
SIGNATURE : Life is like a box of captivates, you never know if your gps will work
so im pretty much able to get it into download mode any time i want. but i cannot get my computer to view it. No matter what USB port i use, it still says unknown/unrecognized device. I see you mentioned something about manually installing drivers, how would i do that?
Try a different PC. Although, it sounds like a driver issue. What version of windows are you on?
sent from my Gingerbread Cappy using Tapatalk from somewhere on AT&T's ****ty network.
I know others have had issues with i9000 ROMS not being recognized once their phone goes in download mode. Here is a whole thread about it.
yeah i checked through that whole thread, it wasnt any help.
My comp is 32 bit windows 7. ive tried to connect my phone to a 64 bit windows 7, and a mac, and still havnt gotten ****. Im getting really frustrated. What are my options when i simply cannot find a way to get Odin to view the phone? All it says is that my USB device has malfunctioned and it wont work.
EDIT1
okay. ive discovered that if i plug in my USB while the ATandT logo is looping, my computer will see it as an external storage device. THEN i jig it into download mode, and plug it into the same port, and it will no longer see the device as unknown, but instead calls it 'androidtest,' although it still doesnt show up in Odin3. hmmmmm could this be a lead into getting it to show up? Every other attempt ive done has ended up with it just calling it unknown device
EDIT2
Searching through the device manager shows that the phone no longer shows up under universal serial bus controllers, but instead 'libusb (WinUSB) devices', under the name Androidtest. But as i said before, still no luck getting it to show up with Odin, either the one click or the choose all the components version. Any thoughts?
icanhearpudding said:
yeah i checked through that whole thread, it wasnt any help.
My comp is 32 bit windows 7. ive tried to connect my phone to a 64 bit windows 7, and a mac, and still havnt gotten ****. Im getting really frustrated. What are my options when i simply cannot find a way to get Odin to view the phone? All it says is that my USB device has malfunctioned and it wont work.
Click to expand...
Click to collapse
It really sounds like a driver issue. Have u tried downloading I9000 drivers?
prbassplayer said:
It really sounds like a driver issue. Have u tried downloading I9000 drivers?
Click to expand...
Click to collapse
ive downloaded and uninstalled and redownloaded all sorts of different captivate drivers. it always still just said 'usb device malfunctioned.' i belive at this point, i have every driver uninstalled, hoping that windows itself would grab the right one. . ..
idea: ill reinstall captivate drivers. . . then ill do the usb while atandt is booting and THEN use the same usb port for the download mode. Without drivers, this is how i got to the 'androidtest' deal. perhaps with drivers installed, it will do something different.
icanhearpudding said:
ive downloaded and uninstalled and redownloaded all sorts of different captivate drivers. it always still just said 'usb device malfunctioned.' i belive at this point, i have every driver uninstalled, hoping that windows itself would grab the right one. . ..
idea: ill reinstall captivate drivers. . . then ill do the usb while atandt is booting and THEN use the same usb port for the download mode. Without drivers, this is how i got to the 'androidtest' deal. perhaps with drivers installed, it will do something different.
Click to expand...
Click to collapse
HOOOOOOOOOOOOOOOORAY. I did it! THis worked. I had to have the captivate drivers, installed, THEN plug it in during the at and t boot loop THEN plug it in after jigging download mode. Thanks so much for your help everybody!

Captivate stuck on phone-!-computer screen, even with jig

So I was flashing a stock rom from Odin, and Odin froze, so I unplugged the phone and took out the battery. Now, when I try to get into download mode, all I get is a screen with a phone-!-computer. Even with a usb jig, it just goes to this screen. My captivate is also not recognized by the computer when I plug it in when its on the phone-!-computer screen.
cherrybombaz said:
So I was flashing a stock rom from Odin, and Odin froze, so I unplugged the phone and took out the battery. Now, when I try to get into download mode, all I get is a screen with a phone-!-computer. Even with a usb jig, it just goes to this screen. My captivate is also not recognized by the computer when I plug it in when its on the phone-!-computer screen.
Click to expand...
Click to collapse
Have you tried all the steps in the Captivate Connection Issues post (in my signature)?
Does it say something about hardware upgrade failure?
mrhaley30705 said:
Does it say something about hardware upgrade failure?
Click to expand...
Click to collapse
Nope. It just doesn't show up at all; not even in device manager and it just shows the phone exclamation computer screen.
jmtheiss said:
Have you tried all the steps in the Captivate Connection Issues post (in my signature)?
Click to expand...
Click to collapse
Yea more or less. The weird thing is it was detected before and odin was able to start the flash. But it hung after it said do not disconnect the device so I was forced to unplug it. Now I just don't see anything at all.
cherrybombaz said:
Yea more or less. The weird thing is it was detected before and odin was able to start the flash. But it hung after it said do not disconnect the device so I was forced to unplug it. Now I just don't see anything at all.
Click to expand...
Click to collapse
Have you given Heimdall a try? It sometimes works when Odin won't.
jmtheiss said:
Have you given Heimdall a try? It sometimes works when Odin won't.
Click to expand...
Click to collapse
Yep. When I try to install the heimdall driver, the phone doesn't even show up so it won't install.
cherrybombaz said:
Yep. When I try to install the heimdall driver, the phone doesn't even show up so it won't install.
Click to expand...
Click to collapse
Odd. I'm assuming you've done all the uninstalling drivers, rebooting, etc, etc?
jmtheiss said:
Odd. I'm assuming you've done all the uninstalling drivers, rebooting, etc, etc?
Click to expand...
Click to collapse
Yea I tried uninstalling and reinstalling the Odin drivers. How do I uninstall the heimdall driver?
Driver Uninstallation Instructions:
1. Put your Samsung Galaxy S Captivate (i897) into download mode by holding Volume Down + Volume Up and...
2. Plug your phone into your PC.
3. Open up Device Manager on your PC.
4. Under "Libusb (WinUSB) devices" right click on "Samsung USB Composite Device" and choose Properties.
5. Go to the Driver tab and select Uninstall.
Done
4-2ndtwin said:
Driver Uninstallation Instructions:
1. Put your Samsung Galaxy S Captivate (i897) into download mode by holding Volume Down + Volume Up and...
2. Plug your phone into your PC.
3. Open up Device Manager on your PC (Control Panel -> System -> Device Manager).
4. Under "Libusb (WinUSB) devices" right click on "Samsung USB Composite Device" and chose Properties.
5. Go to the Driver tab and select Update Driver.
6. Chose to browse your computer for the driver.
7. Chose to pick from a list of devices drivers on your computer.
8. Pick the original Samsung Composite driver, press next and then follow the prompts.
9. Done
Click to expand...
Click to collapse
The problem is I don't see my phone in device manager.
Edited my previous post. Gave u the update instead of the uninstall method, oops.
4-2ndtwin said:
Edited my previous post. Gave u the update instead of the uninstall method, oops.
Click to expand...
Click to collapse
But I don't see the Libusb tab in device manager when I plug my phone in.
When u initially installed the drivers for Heimdall, they only installed to the usb port that u were connected to. So u need to be plugged into that specific port and then u should see it in the Device Manager.
And u really don't need to uninstall the drivers that u need for Heimdall, as long as u installed them after u installed the drivers from Kies. See this post... http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115
And if u have tried everything in the Stickied thread--Captivate Connection Issues and Download Mode Help to no avail, then ??
4-2ndtwin said:
When u initially installed the drivers for Heimdall, they only installed to the usb port that u were connected to. So u need to be plugged into that specific port and then u should see it in the Device Manager.
And u really don't need to uninstall the drivers that u need for Heimdall, as long as u installed them after u installed the drivers from Kies. See this post... http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115
And if u have tried everything in the Stickied thread--Captivate Connection Issues and Download Mode Help to no avail, then ??
Click to expand...
Click to collapse
Yep I made a jig and it works but it doesn't go to the downloading screen with the shovel instead it just goes to the screen with the phone exclamation computer.
Then try this...may sound odd but anyway--just pull ur battery and leave it out for 5 minutes or so and then put it back in and try getting back into download mode and see what happens.
Btw, which stock odin were u trying that got u in this mess ?
4-2ndtwin said:
Then try this...may sound odd but anyway--just pull ur battery and leave it out for 5 minutes or so and then put it back in and try getting back into download mode and see what happens.
Btw, which stock odin were u trying that got u in this mess ?
Click to expand...
Click to collapse
The odin3 one click downloader. Yep I tried taking out the battery -- no go :/.
happened to my cappy yesterday. went through 7 hours to fix mine. had the same issue as yours. no download mode showing with any combo I try even recovery had 4 micro usb cables and still my pc is choosy. that screen is actually download mode. you just need the proper drivers for the pc to read it. I used the one from heimdall. tried for atleast 100x before my pc recognizes my cappy as gadget serial and then boom! after installing,uninstalling and reinstalling all is A-ok now. just try it and have faith on your cappy
gonemad02 said:
happened to my cappy yesterday. went through 7 hours to fix mine. had the same issue as yours. no download mode showing with any combo I try even recovery had 4 micro usb cables and still my pc is choosy. that screen is actually download mode. you just need the proper drivers for the pc to read it. I used the one from heimdall. tried for atleast 100x before my pc recognizes my cappy as gadget serial and then boom! after installing,uninstalling and reinstalling all is A-ok now. just try it and have faith on your cappy
Click to expand...
Click to collapse
What did you try before it was recognized? Did you just plug and replug the usb into the computer until it worked?
Mine did this before, when I accidently forgot to convert back to RFS before flashing back to stock, and I thought I was totally screwed. After this screen comes up the first time it will not go away, even if a download jig is used, until you get a good flash.
Try this:
Open your Odin, and have it ready with whatever you were trying to flash to begin with. Pull the battery on your phone, put your download jig in, and now put your battery in. It will still be the error screen that comes up. Pull your jig, and now plug your phone in. It should show on Odin now, and this flash should take correctly.
---------- Post added at 01:53 AM ---------- Previous post was at 01:50 AM ----------
Also make sure the USB port you are using is a direct link to your board. I always use one of the original USB 2 ports on the back of my computer. Not using a USB hub either, but straight from the port to your phone.

Categories

Resources