[Q] Odin - Captivate Q&A, Help & Troubleshooting

I was just wondering I just recently bricked my last Captivate luckily At&t replaced it for free but im not sure how many more times thats going to work. My idea was that the brick occured from a suspicious looking 2.3 odin file but im not sure if that bricked it. Should I try flashing with the same computer but with a diferent 2.3 odin? I got a new one heres the link.
http://forum.xda-developers.com/showthread.php?t=1129821
Edit: forgot original package that bricked my phone.
http://forum.xda-developers.com/showthread.php?t=1232703

voldomart13 said:
I was just wondering I just recently bricked my last Captivate luckily At&t replaced it for free but im not sure how many more times thats going to work. My idea was that the brick occured from a suspicious looking 2.3 odin file but im not sure if that bricked it. Should I try flashing with the same computer but with a diferent 2.3 odin? I got a new one heres the link.
http://forum.xda-developers.com/showthread.php?t=1129821
Edit: forgot original package that bricked my phone.
http://forum.xda-developers.com/showthread.php?t=1232703
Click to expand...
Click to collapse
A hard brick occurs when you flash incompatible bootloaders. Make sure you flash the gingerbread bootloaders first (either the i9000 bootloaders or 2.3 captivate bootloaders) with odin then flash your gingerbread rom. There are odin packages that include just the bootloaders. Hope that helps.
Sent from my SGH-I897 using xda premium

Yeah it kinda helps im gonna wait though and buy a usb jig just so im ready if anything does manage to go wrong. Thanks though i didnt know that.

See with the package i used that bricked my phone it got stuck in a certain stage and wouldnt go anywhere so i tryed unpluging it and try to go back to 2.1 but after that attempted 2.3 flash it wouldnt accept any odins.

A hard brick not only happens with incompatible bootloaders, but with an incomplete bootloader flash, which is what happened, you say it stopped at a certain point, that is more than likely where it bricked. That package isn't "suspicious", if it were there would be a lot of reports about it.
The first link you posted is bootloaders only. It will not flash 2.3 firmware at all. Just the boots.
To make sure odin doesn't stall out, use a port on the back of the pc, right click odin and run as admin.

What studacris said. Keep in mind there is always a small risk on flashing that Odin fails. So once you flash Gingerbread bootloaders just don't flash any bootloaders again unless you really need to. OR Look in to the Unbrickable mod if you want that.

Just askin how long would ikt take to flash just the gb bootloaders?

Less than a second. Its a very small risk to begging with BUT a risk none the less.

ANother question is there any danger in downgrading bootloaders?

Same as upgrading. No reason to Downgrade except maybe AOSP specific kernels or warranty.

I had to right now because of a bootloop and a failed custom rom install and none of my backups worked and i couldnt install anything else. It said on clockworkmod that it couldnt read my cache folders. Did i have to go back to 2.1? Because thats what i did. Also thank you guys for answering my questions the captivate is so much more complex that the droid when it comes to custom roms and stuff like that.

voldomart13 said:
I had to right now because of a bootloop and a failed custom rom install and none of my backups worked and i couldnt install anything else. It said on clockworkmod that it couldnt read my cache folders. Did i have to go back to 2.1? Because thats what i did. Also thank you guys for answering my questions the captivate is so much more complex that the droid when it comes to custom roms and stuff like that.
Click to expand...
Click to collapse
No there are Odin packages that Do not include bootloaders, just saying. Same as there is GB packages without bootloaders as well (this goes for KF1 and KH3 to my knowledge). Once you flash GB bootloaders there is no reason to reflash bootloaders except for AOSP specific kernels and Warranty.

Related

[Q] Is it safe to flash my new captivate to JF6? batch 1105

I have flashed my phone in the past, but now I read something about some people not being able to go back to JF6. I plan on installing Apex, and i dont want to mess this phone up.
If i do try with one click flash back to jf6, am i risking bricking my phone? (I have a jig btw, but i know these phones can actually hard brick to where the jig wont help)
lourivellini said:
I have flashed my phone in the past, but now I read something about some people not being able to go back to JF6. I plan on installing Apex, and i dont want to mess this phone up.
If i do try with one click flash back to jf6, am i risking bricking my phone? (I have a jig btw, but i know these phones can actually hard brick to where the jig wont help)
Click to expand...
Click to collapse
Newer Captivate do not like to go back to JF6. Try this link it will allow you to flash froyo instead.
http://forum.xda-developers.com/showthread.php?t=1191094
tried that method, ended up not completely wiping my phone for some reason, and the second i turn the phone i got fc's to the point where the phone was unusable.
I used one click odin to get to jf6 and it seemed to work.
When you say these phones dont like it, does that mean that a flash back to jf6 using this method that seemingly went well might actually be messed up?
Try this out
http://forum.xda-developers.com/showthread.php?t=1266172
rkkaranrk said:
Try this out
http://forum.xda-developers.com/showthread.php?t=1266172
Click to expand...
Click to collapse
Whats better to flash back to UCKB2 or jf6?
And whats the difference between those programs. Im most comfortable with odin one click, but is there something wrong with using that? Could that be causing my problems?
Phones that came with Froyo usually bootloop when flashing eclair. Both heimdall packages provided should work. There is a KB1 package for ODIN somewhere as well.
prbassplayer said:
Phones that came with Froyo usually bootloop when flashing eclair. Both heimdall packages provided should work. There is a KB1 package for ODIN somewhere as well.
Click to expand...
Click to collapse
is there any advantage to flashing kb1 over jf6? I mean, flashing to jf6 seems to work everytime....
If it's worked before it'll continue to work... If your phone was going to bootloop from jf6 it would have done it already.
^This +10char
Have you tried downloading the jf6 firmware from Samfirmware? Its a full Odin version, but I don't think it has bootloaders (which is perfect for flashing stock before a ROM).

[Q] Giving Up On Kies Upgrade Attempt, How Can I Try 2.3 without JF6?

Hey folks. I basically just want Gingerbread on my phone, but I'm having issues doing it through Kies as it won't recognize the current firmware when I connect.
I'm not able to flash to JF6 in Odin OneClick without getting an ATT boot screen and nothing more.
Apparently I need to have JF6 in order to get Kies to recognize the phone. I'd like to get this done today (Been two weeks without full function), and I'm thinking I just want to flash to a good rom that runs 2.3.
Is there anything I can do to flash to something other than I896UXJL1-stock or I896UXJI2 TORONTO? These flash well, but are not what I was looking for. Again, I'm going to need something that doesn't require JF6, or another method to get JF6 on without getting stuck at the ATT screen.
Any flash with Odin does not require you to be on a prerequisite firmware, it will flash over whatever you're running.
Go to the Dev section, find a gingerbread firmware with bootloaders included, put phone in download mode and flash.
Full List of Necessary Files for Successful Flash
Okay, I've been browsing around, trying to find something suitable, but now it would seem that I'm not able to flash anything except for the OneClick method which gives me that ATT screen.
I read somewhere that later editions of the Captivate may not work out well with certain Odin flashes. I think my phone is 1038?
I'm hoping that someone might be good enough to show me how to get this thing to flash to what Samsung sent to Rogers from the factory, or at least to a point that I can successfully flash to 2.3. Right now I'm stuck.
Thanks in advance for any help.
Okay, I'm back to UXJL1, using Odin 1.81, and I also found a OneClick that reportedly switches out the bootloaders for GB bootloaders. I tried it, and it did give me an ATT screen, followed by a normal boot and I was back to having apps like Titanium crashing on boot, which is beyond annoying to figure out.
My biggest issue is that I think I have a decent grasp of what's involved in this process, but I don't know which file is compliant with which. I seem to always use 512 for the partition, but I see some variations in that. I also don't know what to do about the bootloader situation except the one tool I mentioned above.
Basically I could either use what I have, go back to Firefly, or keep trying this GB upgrade. I'd rather keep trying but I also need a phone.
I have a ton of different firmware files at my disposal and can download whatever else I need if mentioned, I also have a few different versions of Odin, and OneClick. I downloaded Odin OneClick 2.xx for rooting purposes and it seemed to work with a flash I did today.
Again, thanks for any help.
As for bootloaders. If the 1 click doesn't work, or you don't know if your phone likes 1 clicks I've attached a pda.tar and a odin in a rar that contains just GB bootloaders. This isn't my work I downloaded from somewhere in xda, I just can't remember where so I can't link. All credit to whoever created it. I can't speak specifics for I896 but random FC's usually means a bad flash. Try downloading again or another odin rom. Sorry I can't be any more help.

[Q] Softbrick Returning to Stock, newer build number

Hey guys,
So I recently just got my USB Jig to get my phone out of softbrick (after realizing newer build models cannot use Odin One-click..)
I have a 1107 build, so what can I do to revert it back to stock? Odin won't work for me, and I just want to ultimately flash a custom ROM on it. Should I flash GB bootloaders first or what?
Thank you.
you can use anything except one click for Jf6 by design gears...u can flash GB bootloader...no problems...
Which stock are attempting to return to?
Anything really. I was on ECLAIR before. (On a Rogers phone)
I just want to get out of the soft brick (cellphone--!--computer) to flash MIUI or CM7.
I bricked it by trying to flash the AT&T bootloaders.
Then look through development and pick a stock package. Flash that, then try to apply whatever custom ROM you want. But, if you want GB bootloaders, flash those before flashing MIUI/cm7.
Is there anything I can use to flash stock packages without using Odin? I have a new build number and Oneclick will only brick it again.
How do you feel about Heimdall?
Thank you for your quick responses, I really appreciate it.
I will use this guide to try Heimdall: http://forum.xda-developers.com/showthread.php?t=1113195
Would you have a suggestion on what particular stock ROM I should revert back to? I don't really care for any particular bootloaders at this point in time.
icedd said:
Thank you for your quick responses, I really appreciate it.
I will use this guide to try Heimdall: http://forum.xda-developers.com/showthread.php?t=1113195
Would you have a suggestion on what particular stock ROM I should revert back to? I don't really care for any particular bootloaders at this point in time.
Click to expand...
Click to collapse
depends what kind of custom rom u want to flash later...
If u want to flash CM7/MIUI, then flash to any stock eclair/froyo or Att GB bootloader...
if u want to flash ATT GB roms, then pick any stock GB bootloader from the sticky thread in development section..I personally used Adam outler's one click heimdell stock to KH3
if u want to flash i9000 based GB roms, then flash i9000 GB bootloaders....
Can I use this: http://forum.xda-developers.com/showthread.php?t=1266172 to revert back to stock FROYO?
Actually I should try using Heimdall's One-Click Unbrick first..
edit: Heimdall's One-Click does not recognize my phone in Download mode (after plugging in Jig and then plugging it into computer) or in soft-brick screen.
Will proceed to use Heimdall's One-Click Total Stock
edit: seems like Heimdall's One-Click Total Stock doesn't work either. Computer cannot recognize phone. Help please?
edit: Did Total Stock again on a Windows computer, successful flashing!
Heimdall uses different drivers did you install those?
Sent from my I897 using XDA App
Yup it is all good now. I am now on FROYO now. Going to proceed to try and flash CM7 on it for the first time. Thanks guys!

Update without flash back to stock?

Hi, i'm new to all of this flashing stuff. I'm running CM7 on my captivate and i was just wondering if GB for it came out for it, would i have to flash back to stock before i can update or can i just update out of CM7? While i was trying to flash this CM7 i had problems and had to keep on flashing back to the stock rom(2.1) and when i ever i tried to do a upgrade on kies the phone wouldn't sync because it would just keep crashing.
CM7 is GB. The only ROM you could flash would be MIUI without going back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Like said you can only flash MIUI. Everything else needs to flash back to a stock because you need to repartition your phone. Gingerbread has not been released officially for I897 but it has for I896. Though none official there are a ton of Gingerbread leaks on the dev section.
prbassplayer said:
Like said you can only flash MIUI. Everything else needs to flash back to a stock because you need to repartition your phone. Gingerbread has not been released officially for I897 but it has for I896. Though none official there are a ton of Gingerbread leaks on the dev section.
Click to expand...
Click to collapse
But when i flash back to stock(2.1) it won't let me sync with samsung kies. on the phone it just keeps opening and closing USB MTP or something
Why do you want to sync on 2.1? If you are going to flash a GB rom.
prbassplayer said:
Why do you want to sync on 2.1? If you are going to flash a GB rom.
Click to expand...
Click to collapse
I'm already flashed on CM7. But I'm just wondering when the official At&t GB update comes out for the Captivate, i wanna know how i would update to it. Wanna just try it out. And whenever i did the one click restore and go back to 2.1 it would never let me sync with kies.
RLeWorm said:
I'm already flashed on CM7. But I'm just wondering when the official At&t GB update comes out for the Captivate, i wanna know how i would update to it. Wanna just try it out. And whenever i did the one click restore and go back to 2.1 it would never let me sync with kies.
Click to expand...
Click to collapse
You might be able to update straight from CM7 and do just fine. However, I would advise and I think others would too, to flash back to stock using odin one click. Have all of your stuff backed up externally, run a master clear, and then attempt the update. This is a surefire way to have nothing go wrong as you are coming from factory software.
Reboot your PC and try Kies again. And I think its Kies Mini that does the update not the full Kies program. But its not a special process. They walk you through it and if you can flash a custom rom you will have no problem with the kies mini process.
att gingerbread isnt officially out and YEAH right they would ever give a date....
also dont use keis for anything keis sucks!. use xda site. read xda site. read new user guide (below). read STICKES (explained in guide).
flash back to 2.1 ( or any stock with .pit file or "one-click odin" stock flash)
odin flash (NOT one click) gingerbread bootloaders (find in dev section of captivate)
odin flash (NOT one click) a kernel with cwm built in
cwm flash ANY captivate rom from dev section
---------- Post added at 08:39 PM ---------- Previous post was at 08:39 PM ----------
capocaccia said:
You might be able to update straight from CM7 and do just fine. However, I would advise and I think others would too, to flash back to stock using odin one click. Have all of your stuff backed up externally, run a master clear, and then attempt the update. This is a surefire way to have nothing go wrong as you are coming from factory software.
Reboot your PC and try Kies again. And I think its Kies Mini that does the update not the full Kies program. But its not a special process. They walk you through it and if you can flash a custom rom you will have no problem with the kies mini process.
Click to expand...
Click to collapse
cm7 uses a different partitioning table. STOCK IS A MUST to go backagain KIES IS ****
there are odin one- clicks for 2.1 2.2 and kf1 2.3.3 leak
DONT USE KEIS NO REASON TO IT SUCKS BALLS
This guy seems a little new to the scene so I wasnt going to throw him into the Odin stuff just yet. Its good to know about and while kies isnt the best it is the factory software and is easy for new people to use.
Doesn't matter if he is new. He decided to use CM7 and/or MIUI you NEED to repartition your phone. Kies is just a different UI ODIN with alot of extra checks that are useless. If he wants to move back to I897 roms or to I9000 ports he has no choice on the matter. But like everything else always a good idea t have a Jig just in case and try to use packages that DO NOT include bootloaders when ever possible (not sure if you need to flash bootloaders if you partition)
TRusselo said:
att gingerbread isnt officially out and YEAH right they would ever give a date....
also dont use keis for anything keis sucks!. use xda site. read xda site. read new user guide (below). read STICKES (explained in guide).
flash back to 2.1 ( or any stock with .pit file or "one-click odin" stock flash)
odin flash (NOT one click) gingerbread bootloaders (find in dev section of captivate)
odin flash (NOT one click) a kernel with cwm built in
cwm flash ANY captivate rom from dev section
---------- Post added at 08:39 PM ---------- Previous post was at 08:39 PM ----------
cm7 uses a different partitioning table. STOCK IS A MUST to go backagain KIES IS ****
there are odin one- clicks for 2.1 2.2 and kf1 2.3.3 leak
DONT USE KEIS NO REASON TO IT SUCKS BALLS
Click to expand...
Click to collapse
+1 Kies is beyond **** !!
I can imagine how many people get stuck with that complete "no use" piece of sftware. It is so useless, it just unnecessarily occupies internet space !!!!!!!!!!!!!!!
prbassplayer said:
Doesn't matter if he is new. He decided to use CM7 and/or MIUI you NEED to repartition your phone. Kies is just a different UI ODIN with alot of extra checks that are useless. If he wants to move back to I897 roms or to I9000 ports he has no choice on the matter. But like everything else always a good idea t have a Jig just in case and try to use packages that DO NOT include bootloaders when ever possible (not sure if you need to flash bootloaders if you partition)
Click to expand...
Click to collapse
You should not need to flash bootloaders if the only thing you are doing is going from CM7 to stock based GB ROM. And I believe GB bootloaders are backwards compatible to 2.2.
OP, since you are on CM7, you WILL need to flash back to stock in order to get back to Samsung ROMs, as the phone must be repartitioned.
astroZ0MB1E said:
You should not need to flash bootloaders if the only thing you are doing is going from CM7 to stock based GB ROM. And I believe GB bootloaders are backwards compatible to 2.2.
Click to expand...
Click to collapse
OP didn't indicate whether he has installed i9k GB at any point; to be 100% correct:
If OP flashed CM7 straight from Eclair/Froyo, he will need to flash GB bootloaders for a Galaxy S device.
IF OP has previously flashed i9k or i897 leaked GB, then he does not need to flash new bootloaders ever again.

[Q] Upgrading Froyo UCJI6 to latest Gingerbread

Hello
I have captivate from at&T ( I897). I upgraded last year from eclair to froyo UCJI6 from some site.
Please can some one guide me step by step how to get latest gingerbread. I never had gingerbread on my phone. Upgrading from UCJI6 scares me.
Your help would mean a lot to me.
Thanks
Dillon
xoom11 said:
Hello
I have captivate from at&T ( I897). I upgraded last year from eclair to froyo UCJI6 from some site.
Please can some one guide me step by step how to get latest gingerbread. I never had gingerbread on my phone. Upgrading from UCJI6 scares me.
Your help would mean a lot to me.
Thanks
Dillon
Click to expand...
Click to collapse
Did you even try to use the search? or look at the stickies?
How to Flash Roms Sticky
List of Stock packages and 1 clicks Sticky
XDA Video
prbassplayer said:
Did you even try to use the search? or look at the stickies?
How to Flash Roms Sticky
List of Stock packages and 1 clicks Sticky
XDA Video
Click to expand...
Click to collapse
I looked at your post but it was confusing for me as i dont know much.
There were two download links..one was boot loader free ..other was different one.
Can you please send me the the right steps and link for downloading
thanks
Another resource is
MobileTechVideos <- good video guides.
That being said, modifiying your phone can lead to hard bricks. So above all read and understand everything. Most of the danger is flashing bootloaders (that's why you see packages with and without bootloaders, to limit the danger). If you corrupt one of the bootloaders or flash 2 different (none matching) bootloaders you need a Jtag or UnbrickableMod service. When flashing Gingerbread you NEED gingerbread bootloaders. Once flashed you are golden and don't have flash those ever again.
http://forum.xda-developers.com/archive/index.php/t-1276762.html
i checked above forum where u helped the guy with upgrading UCJI6 to GB.
He had issues while upgrading but eventually he was succesfull.
I could not find which method he used ..
please help me if possible
Read up on how to get in Download mode and how to use ODIN (or Heimdall if you are running a none windows machine). Download a Stock gingerbread rom with bootloaders and flash. The latest is KK4, but i've never used that specific package (though it should have bootloaders) I can speak for KJ3 on that thread.
Basics.
Open ODIN (1 click or not) as admind
Get in download mode (press vol up+voldown+connect to computer
If normal ODIN use the PDA slot and select the .rar.md5 package
Hit start
Let it finish and bootup
???
profit
I'm not responsible if anytthing should go wrong. If odin gets stuck or you do something wrong you will soft brick or possibly hardbrick your phone.
i am giving up.
Can not find any links and steps which are of great help for Upgrading to GB from UCJI6.
Some are going back to 2.1 before upgarding some not.
Dont know what to do
Going back to stock is-was only used for cwm flashes. You will use ODIN. 2 way different things. Follow my steps. Or read through the tons of threads here. It isn't that hard.
waymon31 said:
Really? the guy just asked a question and i can understand he doesnt want to ruin his investmet. we were all noobs once!!! no need to be rude i mean really how much did it cost you to answer his question?
Click to expand...
Click to collapse
he gave up because he couldnt find EXACT instructions on going from one particular FROYO build....because if he had done any actual research, he would know that it doesnt matter what version of FROYO he is on, he will need to flash the ODIN package with the bootloaders....its all covered in the vast damn posts that already cover this extensively. there was ZERO reason to fire up a new thread.
he has been linked to good info and has refused to take heed. reading and UNDERSTANDING is more important than holding hands around here.
Yes we were all noobs once and yes, you need to do your research but he's obviously nervous and not understanding what he's reading right now. Hopefully he'll calm down and understand the information he's been given. We're done here.

Categories

Resources