Pardon by the one of before I do not speak English.
Hello to all.
My problem is the following one:
I yesterday made Overclock with terminal emulator and all correct one. I put that the Overclock remembered and here I made it bad, because I remained without battery and when arriving at to house I put it to load I ignited, it and nothing, I had left pillaged. I did recovery with wipes, I returned to install everything I tried and it again but no longer there was way to obtain it. With terminal emulator I have left myself pillaged when I have introduced the frequency and tlf does a reseteo to me but without going out. if I return it to try I must clear the battery because I have left myself colgadísimo. If I do with 0.5.6beta Nova app I pass the same to me has left myself pillaged at the end of doing overclock.
Somebody knows why happens this to me?
Will have been created some file that it must erase?
Some solution?
Thank you very much, I wait for your answers. A greeting.
Spanish
Hola a todos.
Mi problema es el siguiente:
Ayer hice Overclock con terminal emulator y todo correcto.
Puse que me recordase el Overclock y aquí la cagué, porque me quedé sin batería y al llegar a casa lo puse a cargar, lo encendí y nada, se me quedaba pillado.
Hice recovery con los wipes, volví a instalar todo y lo intenté de nuevo pero ya no había manera de conseguirlo.
Con terminal emulator se me queda pillado cuando he introducido la frecuencia y el tlf me hace un reseteo pero sin apagarse. si lo vuelvo a intentar tengo que quitar la batería porque se me queda colgadísimo.
Si lo hago con Nova app 0.5.6beta me pasa lo mismo se me queda pillado al final de hacer overclock.
¿Alguién sabe por qué me ocurre ésto?
¿Se habrá creado algún archivo que tenga que borrar?
¿Alguna solución?
Muchas gracias, espero vuestras respuestas.
Un saludo.
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Sent from my LG-P970 using xda premium
Sobralobo said:
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Click to expand...
Click to collapse
I think it's translation. If you understand, perhaps you can give solution of those problem?
redy2006 said:
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
Click to expand...
Click to collapse
or the text is corrected or that I create.
pelucaslee said:
or the text is corrected or that I create.
Click to expand...
Click to collapse
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
redy2006 said:
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
Click to expand...
Click to collapse
Ok, posted, thanks
from what I can make out of it, it's a portugese or spanish lang (he just posted it lol)...I think he's trying to say that he overclocked his phone making it unstable (if im not wrong) and he's saying it's like a brick now and wont turn on even with plugging it in and asking if he tinkered with the wrong file or somthing?
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Yes, I think that he only made wipe, and not flashing.
you can try to make wipe and reflash again.
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
hago el overclock con terminal y pongo 1,1 pero se cuelga
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Sent from my LG-P970 using XDA App
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
pelucaslee said:
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
Click to expand...
Click to collapse
Have you wiped all and reflashed?
¿Has hecho todos los wipes y reflasheado?
Hi, I work. seem silly but the keyboard has been changed and has come to first.
certainly never been clear to me what the phone reflash.
thank you very much everyone.
hug a friend.
Sent from my LG-P970 using XDA App
nada, se me queda pillado el teléfono, se reinicia sin apagarse del todo y ya no puedo hacer overclocking, se me cuelga.
Sent from my LG-P970 using XDA App
i do a full wipe and install nova 8 and aoverclock doesnt works, frezze phone or run very slow like 200 mhz :S, nova 8 have so many issues, i think rollback to stock from LG
hice full wipe e instale y nada, si overclockeo se cuelga o corre muy lento aparte de verle muchas fallas a nova q estoy a punto de irme a la stock mas estable
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Huexxx said:
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Click to expand...
Click to collapse
What's actually the purpose of overclock, perhaps those people doesn't know it (yet)...
CMIIW.
Related
Hello!!
I just got a galaxy s from movistar venezuela. I managed to root it using the guide in this post: http://forum.xda-developers.com/showthread.php?t=803682
The version is
PDA: I9000TUBJPA
PHONE: I9000TUBJPA
CSC: I9000TVMTJP6
BUILD INFO: 2011.02
H/W: MP 0.800
RFCallDate: 2077.3.19
MODEL NUMBER: GT-I9000T
FIRMWARE VERSION: 2.2.1
BASEBAND VERSION: I9000TUBJPA
KERNEL VERSION: 2.6.32.9 [email protected] #1
BUILD NUMBER: FROYO.UBJPA
Now, the thing is, I don't know how to upgrade to ginger or any other rom... and to add something more, its odexed, and i can't change anything in the system apps.
So, can someone point me in the right direction? if not for upgrading at least to add remove the odexed system apps.
Or a hint on what firmwares are compatibles with this model, 'cause so far... all I've read is "for the international version of the galaxy s" and I really really don't want to brick it!
THANKS!!!
anyone????
si si puedes, a mi me acaba de pasar todo un desastre no sabia que estos eran GT-I9000T pense que eran gt-i9000 y le hice upgrade a gingerbread y custom roms kernels roteados todo un desastre, de por si ya en la parte de info me dice que es un GT-9000 pero habia un problema me escuchaban horrible durante las llamadas, todo esto llevo semanas de pruebas hasta que consegui la forma de instalar los archivos de modems de un gt-i9000t y parece estar funcionando mejor
en resumen, primero haz un backup de tu rom, asi de paso me pasas los archivos de radio u.u y despues haces el update normal via odin, y despues con modo recovery instalas el modem.zip que debes haber sacado de tu respaldo
english
Yes u can i think, i have been passed for a dissaster i just ignore this phones from movistar are GT-I9000T and not a GT-I9000 and i make a upgrade to gingerbread and costum roms ( kitchen rom) and i take root .. the whole combo, the info screen show me my phone is a GT-I9000 X.X, but here start the dissaster, during my calls the sound of my voice was horrible, so i have been testing like 2 weaks trying to fix this., until i found was a problem with the radio files and i found a way to instal modem files of a i9000t and aparently work better
so, in my opinion make a backup of ur stock rom, in that way i cant get the oroginal movistar modem files, later u make the upgrade via odin an when is finnish u install again the radio files from recovery.. and it should be work
pd: like i tell u Allgamer my english sucks =D
mira pana, porfa e incluya las traducciones en ingles (aunque sean machucada por Google Translate) que así dictan las reglas de este foro, sino voy a tener que cerrar este tópico
gracias
AG
corduroy look, porfa and include English translations (albeit bruised by Google Translate) so dictate the rules of this forum, but I have to close this topic
thanks
AG
Click to expand...
Click to collapse
LMAO!!! that was funny... i guess GT can't handle the real deal yet
i just was planing get some atention (?) and its work right? xD i know a little of english and he is from venezuela too so i get lazzy D: my bad
just use GT and do copy & paste, it takes less than 5 sec
Click to expand...
Click to collapse
basta con usar el GT y le das por copi y pastear, que eso ni toma 5 sec
AllGamer said:
basta con usar el GT y le das por copi y pastear, que eso ni toma 5 sec
Click to expand...
Click to collapse
Fixed now =D thank for the patient
@francescopp
casi todos los ROMs para i9000 que vez en DEV los puede usar, el único problema que tal vez encuentre es que después de flashear el ROM pierdas las bandas de radio de 850
lo único que si tienes que tener cuidado es de evitar de flashear ROMs que venga con la .tar de radio, en cuyos casos puedes entrar al menú de bandas de selecciones y prender eso de nuevo.
pero de todas maneras es un lio, basta flashear ROMs que cambia nada mas la parte del PDA
cuando bajas ROMs normalmente viene con varios archivos .tar que normalmente son separados en Radio, PDA, etc...
en esos caso puedes flashear en ODIN la parte de PDA, así previenes el problema de las banda de radio
@ francescopp
ROMs for almost all that time in DEV i9000 can use them, the only problem you may find is that after flashing the ROM miss bands of 850 radio
if all you have to be careful to avoid the flash is to come with ROMs. tar radio, in which case you can enter the menu selections and turn bands that again.
but still is a mess, just flash ROMs that changes anything but the part of PDA
when low ROMs typically comes with several files. tar that are normally separated in Radio, PDA, etc ...
in such cases can flash on the PDA ODIN, thus preventing the problem of the radio band
Click to expand...
Click to collapse
AllGamer said:
@francescopp
casi todos los ROMs para i9000 que vez en DEV los puede usar, el único problema que tal vez encuentre es que después de flashear el ROM pierdas las bandas de radio de 850
lo único que si tienes que tener cuidado es de evitar de flashear ROMs que venga con la .tar de radio, en cuyos casos puedes entrar al menú de bandas de selecciones y prender eso de nuevo.
pero de todas maneras es un lio, basta flashear ROMs que cambia nada mas la parte del PDA
cuando bajas ROMs normalmente viene con varios archivos .tar que normalmente son separados en Radio, PDA, etc...
en esos caso puedes flashear en ODIN la parte de PDA, así previenes el problema de las banda de radio
Click to expand...
Click to collapse
well the problem was i just ignore this because i was thinking my phone is a GT-9000 is what he say when he turn on, and the box but today in movistar central service they say to me is a gt-i9000t and i lost my warranty because i alterate the original software of the phone!!
now let me tell u my history.. when i buy the phone a month ago, first thing i do was instal darky 10 RC3 wich one have 2.3.3 jvk in base right? well i just select all pda phone css in odin and flash.. ok.. i lost the 3g but i just configure again the APN and ok... it was a litlle bugy but i stiil there until the version 2.3.3 Jbv roll out.. once again i use odin etc etc 3 weeks pass and now i want a theme.. so i have to instal a dock kitchend coz most of them are only for undeoxed roms.. just great everything working.. 3G its just great always in H and super fast the internet.. BUUUT! i was having a problem during my calls i hear the ppl good, but they hear me horrible like i was in a tunel or something, and i work with my phone.. i mean like 80 calls in a day.. 40 diferent pll and a less 30 of them always saying ah? uhm? what? i cant hear u!! and omg.. these days i want to kill my self!! so i go to a movistar.. they say me they can do nothing because i change the software bla bla bla.. and the pone is a I-9000T and that can be causing the problem.. so ok.. i tal to a friend with the same phone STOCK! he dont touch anythign and he explain to me maybe i lost the 850 band.. so ok i look into the roms for the i9000t... big surprise they use the same jvb or jvh they flash everything and after all they flash a file called modem.bin or instal in recovery the whole modem.zip wich contain the band 850... and excelent i sound like a normal human in the calls.. but sorprise!! i got the h in the signal.. but its slowy like hell.. ok i think in re configure the apn.. surprise in empty.. ok no problem i decide add it again.. once again a surprise when i pick save he dont do it and keep empty... ._. so, or a nice internet or a nice call!!! im sad!!
pd: like u note this is my first android!! i am a newbie.. who is in a big odisee
just do a full system Data Wipe and Cache Wipe in CW recovery.
install CW recovery (ClockWorks ROM Recovery) if you don't already have it, then boot into the CWR and you can select to wipe the cache and wipe the data.
after that you should be able to save the APN settings
optionally you can find a STOCK i9000T ROM and revert back to stock with ODIN
wew the phone just dont boot more!! xD got stock in the mainscreen GALAXY S GT I9000 donwloading mode.. and flashing 2.3.3 JVH wich modem have 850 in theory good bye apps.. and all the work on the homescreen xD
"dejame reir para no llorar"
so it works on stock, or it's broken?
I install The jvh 2.3.3 with the tl3j Módem of froyo and works fine
Enviado desde mi GT-I9000 usando XDA Premium App
y en mi caso instale la rom 2.3.3 de movistar venezuela y ahora por nada del mundo me funciona la camara. he realizado mil y un procedimientos y la camara no levanta. ya no se que rom usar para que esta pueda funcionar bien.
Rom 2.3.3 of movistar Venezuela? That exist? Send me your number in a pm to help you
spanish: 2.3.3 ofrece movistar Venezuela 2.3.3? No sabia.. si quieres dejame tu numeros en un pm para llamarte y ver en que te puedo ayudar yo tengo todo funcionando.. pero con otras roms
Enviado desde mi GT-I9000 usando XDA Premium App
Hello. This is my very first post in this forum. I have a Galaxy S form Movistar Venezuela and would like to know if Voodoo 5.5 lagfix can be applied to this model because it is I9000T. This model is not International an don't know if any problem could be arises using the odin method to flash it (The restore method doesn’t work).
Also, I would like to know how to backup the entire phone firmware/software in order to have a way to restore it in case of guarantee action.
Any guide would be much appreciated.
Best Regards,
Marcelo.
Hola, este es mi primer post en este foro. Tengo un Galaxy S comprado hace 2 semana en Movistar y quería saber si podía aplicar el lagfix Voodoo 5.5 sin problemas ya que según el sitio "oficial", Voodoo es solo para el i90000 Internacional y de ciertas operadoras americanas.
También quería preguntarles como hacer un backup completo del firmware original del teléfono, incluyendo el Operatorware para poder restaurar el teléfono en caso de garantía.
Muchas gracias por la ayuda que me puedan prestar.
Marcelo.
AllGamer said:
just do a full system Data Wipe and Cache Wipe in CW recovery.
install CW recovery (ClockWorks ROM Recovery) if you don't already have it, then boot into the CWR and you can select to wipe the cache and wipe the data.
after that you should be able to save the APN settings
optionally you can find a STOCK i9000T ROM and revert back to stock with ODIN
Click to expand...
Click to collapse
I dont Know why, but i was trying this, and a got bootloop, over and over again, running JVH and smart Juwe.. any idea?
phone: I9000TUBJPA
hi! this is the modem for the GT-I9000T from movistar venezuela...
phone: I9000TUBJPA
thanks to mpjoe2000 ( http://forum.xda-developers.com/member.php?u=4086026 )
Hello, Anyone has the original Movistar Venezuela ROM in CWM backup?
I need it.
Thank you.
Hola, Alguno de ustedes tiene la ROM Movistar Venezuela original en backup CWN?
La necesito.
Gracias
most uses Odin3. than that superoneclick. it's so easy to change rom / upgrade version. the how to install guide is on every rom you can find here in xda.
marcelogabriel said:
Hello, Anyone has the original Movistar Venezuela ROM in CWM backup?
I need it.
Thank you.
Hola, Alguno de ustedes tiene la ROM Movistar Venezuela original en backup CWN?
La necesito.
Gracias
Click to expand...
Click to collapse
there is a thread in the i9000 general section, that has he original rom from movistar, but it is not cwm is a odin rom.
( http://forum.xda-developers.com/showthread.php?t=1242083 )
flash it at your own risk!! many people posted that it bricked their phones, so i'm not responsible for anything that could happen to your phone.
i explained in that thread what i did to flash it in order to make it work. because the first time i flashed it it did bricked my phone fortunately for me, it was still on warranty so movistar fixed it. (I said that it didn't turn on any more, so they replaced the logical board)
hope this help.
hay una publicacion en la seccion i9000 general, en la que esta el rom original de movistar, pero ten cuidado y si lo vas a flashear no me hago responsable por ningun daño que pudiese ocurrir!!! ya que hay varias personas que han posteado que el rom les brickeo el telefono ( a mi tambien me lo brickeo, pero como estaba en garantia me lo arreglaron en movistar) lo que quiere decir que realmente si hay algun detalle con ese archivo, luego de que me arreglaron el cel me puse a leer en mucho sitios que podia haber pasado y llegue a la conclusion de que se me habia dañado el boot del telefono, lo que hice luego fue al rom de movistar que habia bajado en el otro thread ( el mismo que me brickeo el cel) le elimine la parte del bootloader y se lo monte, sin problemas. en el thread donde esta el rom explique como lo modifique.
nuevamente no me hago responsable por nada.
I have a I9000T with 2.3.3 PDA:JV6/PHONE:JV6/CSC:JV6(TTT) get from Kies and I do not know how to root it. I do not konow which version of CFroot is correct to this, thanks ( My English is very bad)
The post is incorrect it must be " how to root JV6 "
And the story goes on and on and on...
Go for Semaphore, it's a refined version of CF.
Plays very nice on most Gingerbread ROM.
Thanks stratosk
Sent from my GT-I9000 - Semaphore 1.3.2
O-T said:
And the story goes on and on and on...
Go for Semaphore, it's a refined version of CF.
Plays very nice on most Gingerbread ROM.
Thanks stratosk
Sent from my GT-I9000 - Semaphore 1.3.2
Click to expand...
Click to collapse
Please be patient, I am new in this and my language is Spanish, I need more help if you can, thanks
hugoalo said:
Please be patient, I am new in this and my language is Spanish, I need more help if you can, thanks
Click to expand...
Click to collapse
Hugo mi hermano, la unica manera de rootear es con lo que el tipo ese dijo. Yo tuve problemas cuando coji el 1.4 o sea el que es pa JVR, asi que baja el 1.3.x ( http://forum.xda-developers.com/attachment.php?attachmentid=664615&d=1311540085 )
Espero que sepas como flashear los kernels, si no, pues es con odin, asi que busca un tutorial en linea. Es muy facil el encontrarlo. Si no quieres cambiar el kernel pues mi querido amigo te tengo terribles noticias. No hay manera facil de rootear el jv6.
neswii said:
Hugo mi hermano, la unica manera de rootear es con lo que el tipo ese dijo. Yo tuve problemas cuando coji el 1.4 o sea el que es pa JVR, asi que baja el 1.3.x ( http://forum.xda-developers.com/attachment.php?attachmentid=664615&d=1311540085 )
Espero que sepas como flashear los kernels, si no, pues es con odin, asi que busca un tutorial en linea. Es muy facil el encontrarlo. Si no quieres cambiar el kernel pues mi querido amigo te tengo terribles noticias. No hay manera facil de rootear el jv6.
Click to expand...
Click to collapse
Hola compañero, gracias por contestar,, luego de recorrer todos los foros, lo rooteé con éxito con el CF-Root-XX_OXA_JVO-v3.2-CWM3RFS y va de lujo, un abrazo desde Buenos Aires
Por favor ayudadme tengo el android 2.1 y,quiero rootear pero siempre me da error en el superclickone se queda en waiting for device y tambien he probado con el flash tool pero nada si alguien me puede ayudae se li agradeceria
Please translate it in english.
Hola verifica que la version del software es la correcta, creo ke hay uno modificado para X8, a mi me paso igual hasta que cai en cuenta que tenia la version incorrecta
Ah! y no postees en español al menos pasa la pregunta por el google para ke la traduzcas al ingles. Si tienes mas dudas puedes contactarme por mensaje personal, espero haberte ayudado.
Sorry for posting in spanish, but I am just answering to the original question. I informed the original poster that he should not post in spanish.
psyke80 said:
Hola verifica que la version del software es la correcta, creo ke hay uno modificado para X8, a mi me paso igual hasta que cai en cuenta que tenia la version incorrecta
Ah! y no postees en español al menos pasa la pregunta por el google para ke la traduzcas al ingles. Si tienes mas dudas puedes contactarme por mensaje personal, espero haberte ayudado.
Sorry for posting in spanish, but I am just answering to the original question. I informed the original poster that he should not post in spanish.
Click to expand...
Click to collapse
i have a problem! my x8 was rooted but i had to flash it again to come back to stock from a custom rom! and now i cant root it again! Flashtool doesnt detect it! and superoneclick dont respond! any solution
my fix
netho25 said:
i have a problem! my x8 was rooted but i had to flash it again to come back to stock from a custom rom! and now i cant root it again! Flashtool doesnt detect it! and superoneclick dont respond! any solution
Click to expand...
Click to collapse
Pretty easy bro, just download and install the following driver to enable rooting (at least it was necessary to me)
mediafire.com/?rd7783wzba7j07v
Once done, update baseband and then execute onesuperclick.
biros said:
Por favor ayudadme tengo el android 2.1 y,quiero rootear pero siempre me da error en el superclickone se queda en waiting for device y tambien he probado con el flash tool pero nada si alguien me puede ayudae se li agradeceria
Click to expand...
Click to collapse
Thanks for sharing!
Mira Te voy a ayudar, primero bajate el pc companion, instalalo
2-bajate la mayoría de las ultimas versiones de superoneclick
3-conectate a pc companion, y hace que te detecte el Telefóno(prendido)
4-habri cada uno de las versiones de superoneclick, y proba root, si una no sirve proba con la que sigue
5-si esto sirvió, apaga y prende tu telefono luego del proseso
Saludos desde Argentina
Sent from my x8 using TecnoBread
why are you keep talking spanish? can you stop it already?!
Lol
I really like when i know I'm talking in 2 languages
Also I'm helping him to understand cuz he write in spanish
Sent from my x8 using TecnoBread
Hello very good to all. Today do I come to ask if someone can install like the chamber stock of the xperia z1 for the rom rc3 pac man rom? It is that I explain to you: I put on this rom, stocks in cyanogenmod, and I do not like the chamber anything, do the photos with too softly, them done very very badly, and I use other apps that before me were OK (of chamber) and with this rom one continues seeing badly use the one that you use and not that to do, in all the rom custom spends this or only in them of cyano? Me nothing pleases it the chamber, one sees very badly ... uses translator or something for that the one that I use translates it very badly
Blizzord said:
hola muy buenas a todos. hoy vengo a preguntar si alguien sabe como instalar la cámara stock de el xperia z1 para la rom rc3 pac man rom? es que os explico: me puse esa rom, basada en cyanogenmod, y la cámara no me gusta nada, hace las fotos con demasiado suave, las hecha muy muy mal, y uso otras apps que antes me iban bien ( de camara) y con esta rom se sigue viendo mal uses la que uses y no se que hacer, en todas las rom custom pasa esto o solo en las de cyano? no me gusta nada eso de la cámara, se ve muy mal...
usar traductor o algo por que el que uso yo lo traduce muy mal
Click to expand...
Click to collapse
No se puede (it can't do)
Maybe others can help you if you use English
Sent from my C6903 using Tapatalk
davidteri91 said:
No se puede (it can't do)
Click to expand...
Click to collapse
okay thanks
You should write in English because this is an international forum AND is in the rules:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature)
Click to expand...
Click to collapse
Blizzord said:
hola muy buenas a todos. hoy vengo a preguntar si alguien sabe como instalar la cámara stock de el xperia z1 para la rom rc3 pac man rom? es que os explico: me puse esa rom, basada en cyanogenmod, y la cámara no me gusta nada, hace las fotos con demasiado suave, las hecha muy muy mal, y uso otras apps que antes me iban bien ( de camara) y con esta rom se sigue viendo mal uses la que uses y no se que hacer, en todas las rom custom pasa esto o solo en las de cyano? no me gusta nada eso de la cámara, se ve muy mal...
usar traductor o algo por que el que uso yo lo traduce muy mal
Click to expand...
Click to collapse
La respuesta es no e incluso si pudieses, lo que hace a la camara stock mejor son las optimizaciones (Bionz, X-Reality) y por lo mismo apps de camara que antes se veian bien ahora andan "mal"
I will translate the Blizzord's question:
Can i install stock camera app in a cyanogenmod based rom?
Why other camera apps that takes good pictures in stock rom went so bad in pac man rom?
@Blizzord as already mentioned, the only allowed language on XDA is english, so please update your OP with an english translation ASAP.
El día de ayer mi teléfono se quedo sin batería al 0% y asta el día siguiente lo conecte a la luz y todo bien. El problema fue que a la hora de encenderlo no quiso y no me deja entrar en recovery y la pc lo detecta como dispositivo desconocido, cabe recalcar que estaba en android 7.0 sin root ni nada. Y hoy lo abrí y tome el voltage de la batería y estaba totalmente cargada y ya revise todo y hardwere no es. Creo que se trata de un hardbrick hay solución
In English:
Yesterday my phone ran out of battery to 0% and till the next day connect light and all good. The problem was that when you turn it on and would not let me enter no recovery and the pc detected it as an unknown device, it should be emphasized that it was in android 7.0 without root or anything. And today I opened it and take the voltage of the battery was fully charged and check everything and hardwere is not. I think there is a solution hardbrick
I pasted this in G-translate.
When I pressed the Dutch button, this came out:
The third man by Los Indios Trabajaras
Eduardo117HR123 said:
El día de ayer mi teléfono se quedo sin batería al 0% y asta el día siguiente lo conecte a la luz y todo bien. El problema fue que a la hora de encenderlo no quiso y no me deja entrar en recovery y la pc lo detecta como dispositivo desconocido, cabe recalcar que estaba en android 7.0 sin root ni nada. Y hoy lo abrí y tome el voltage de la batería y estaba totalmente cargada y ya revise todo y hardwere no es. Creo que se trata de un hardbrick hay solución
Click to expand...
Click to collapse
I didn't mean to thank you, hehehe
Can you get it to boot to bootloader, the menu before getting to the recovery menu? If you can, then is probably fine. Just flash it back to stock using adb or one of the toolkits available here on XDA.
Mi intencion no era darle al boton de gracias, jejeje
Si aun puedes accesar el bootloader del telefono todavia debes poder volver a stock usando alguno de los toolkits que hay aqui en xda. Yo creo por mi experiencia que 7.0 no se lleva bien con los recoveries pq despues de flashar recovery y hacer reboot el tel no quiere volver a entrar al recovery y tengo que volver a flashar recovery de nuevo. Si no entonces tienes un problema de hardware aunque no lo parezca.
Sent from my Nexus 6 using Tapatalk
¿te deja pues entrar al bootloader?
Moderator Edit:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
@domopeacemaker: On this site, all posts must be in English.
En este sitio, todos los mensajes deben estar en Inglés.