i'm in need of a working at&t stock rom the one in the dev section only gives a black screen which would work if i was returning it but i'm not i'm giving it to my step father cause i got a transformer but i need to restore it from cm7 so it has data and everything works so if anyone could help me out i thank you
CM7 isn't fully functional?
What about Overcome or the Stock 2.3.3 Gingerbread?
mostly everything worked but data didn't so i tried to restore to stock and the stock firmware thread only gave me a black screen and rotos links are dead
Related
Hi guys,
I got my T-Mobile Samsung Galaxy Tab from someone who had the Team Overcome ROM.
Today, I decided to sell it to someone so I wanted to remove all my info by wiping all the stuff out and somehow I messed up things and now I am stuck with this page when I go into recovery. I tried to flash other ROMs that were 2.2 ROMs and even though they flash fine, they just keep on restarting every time the display goes to sleep or if I just touch the power button.
Anyways, below is a picture of the screen that I get when I go to Recovery and I do not know where to start from to get everything back to normal before I can sell this device.
I'd appreciate some direction and some help.
Thanks
You need to restock with the Froyo safe stock rom from overcome. Just putting other froyo versions on with recovery won't work as you have gingerbread bootloaders...
Try reading before doing these things or you will end up with a brick...
you need to restock it all over again and word of advice use the new overcome rom called Kratos with gingerbread based rom it's a lot fast and stable ..
medoo88 said:
you need to restock it all over again and word of advice use the new overcome rom called Kratos with gingerbread based rom it's a lot fast and stable ..
Click to expand...
Click to collapse
How can I restock? I'd appreciate if you guys can provide the proper link.
Does anybody know where I can get the original AT&T data usage widget (the one that comes with stock ROM) ? I just need the widget without having to re-flash stock ROM. Thanks in advance
edit: found it here http://forum.xda-developers.com/showthread.php?t=898688 searched the wrong sub-forum
I'm pretty sure it only came with the stock ROM, but I did save a copy of it when I flashed to Overcome. Works fine on Jupiter, haven't installed on Kratos yet. I'll see if I can dig it up when I get home.
Ok so I am trying to get back to stock Froyo on the P925. Everything is great except the radio. I assume it is from the O3D because all I can seem to get is Edge.
So I've been looking through the forums all day and finally I found this...
http://forum.xda-developers.com/showpost.php?p=19440931&postcount=48
So now I need some help flashing this .fls file. I am rooted with cwm and have the V10e_00.kdz flashed and the update_thrill_stock_rom_rooted.zip as well. I dont want to go back to V20p just to get my H / H+ signal back. I've tried flashing the thriller rom to get the att froyo radio back but have had no luck. This seems to be the "golden ticket" but I cant find a clear guide on doing it. If anyone knows of a link to a guide with the files needed to accomplish this I could end this nightmare. If the phones radio isnt working right then it cant be considered "stock". I've seen a ton of guides on returning the thrill to stock but none include getting the right baseband.
Follow the steps on
HERE.
Most of the steps worked flawlessly for me with the exception, I had to run "B2CAppSetup" from a different folder.
All of the files are linked to on this guide.
I had 2.3.5 on my LG P925g (with lots of battery, phone, and SMS issues) This guid helped me to return to original 2.2.2. Been working flawlessly
hopefully it helps you out
KahaliTao said:
Follow the steps on
HERE.
Most of the steps worked flawlessly for me with the exception, I had to run "B2CAppSetup" from a different folder.
All of the files are linked to on this guide.
I had 2.3.5 on my LG P925g (with lots of battery, phone, and SMS issues) This guid helped me to return to original 2.2.2. Been working flawlessly
hopefully it helps you out
Click to expand...
Click to collapse
yeah that is how I got to 2.2 stock rom but following those steps leaves you with everything stock except the original att baseband. When you flash the v10e.kdz it gives you everything stock except it leaves you with the p920 BaseBand. I read that flashing thriller may resolve it but it didnt work for me.
this is the fix
http://forum.xda-developers.com/showthread.php?t=1343915
I just did it and it works flawlessly. Its long and complicated but there is a video to help. follow the steps and it will restore the actual stock baseband. The link has all the downloads you will need and explains this process step by step. I got my H+ back Now my phone is truly back to stock.
Hi Guys
bit of a newb her, I tried to flash a jellybean rom and after doing plenty of research followed the instructions to the letter. The result was that it didnt work and reverted back to honeycombe 3.2. The problem i have is that it no longer allows me access or set up my google account and some buttons such as the home button no longer seem to work. I have been unable to go back to stock and am lookign for a little guidance.
I did carry out a factory reset.
Kies is also not recognising my tablet.
I apologise for starting a new thread if this has been asked before. I have not seen an identical problem on this forum so far
Did you make a backup in cwm recovery for the stock honeycomb before flashing the jellybean? And what method did you use to revert back to stock?
For the factory reset, did you do it after reverting back to stock or before?
Sent from my GT-P7300
x24 said:
Did you make a backup in cwm recovery for the stock honeycomb before flashing the jellybean? And what method did you use to revert back to stock?
For the factory reset, did you do it after reverting back to stock or before?
Sent from my GT-P7300
Click to expand...
Click to collapse
I did do a backup in CMW recovery. The flash to jellybean didn't failed. It took a few minutes and then restarted and booted up as 3.2. The factory reset and wipe cache partition were carried out as per the instructions online prior to installing the zip file.
I'm just hoping it is possible to resolve this problem.
thanks for any help
Just to provide an update. I have now resolved the problem
After trying to factory reset my tab then became stuck was stuck on the galaxy tab screen. Using the stock rom for 3.2 found here http://forum.xda-developers.com/show....php?t=1483168 i was able to flash this using Odin and much to my relief it booted up again in 3.2.
Much to my amazement once it was flashed onto my device and booted up i was able to get an OTA update to ICS 4.0.4 which was a bit of a suprise. Not sure how or why this happened but i am very pleased with the result. ICS is a huge improvement from honeycombe and is like having a new tablet. It is so much smoother and more responsive.
I was using CWM 5.2.0.4
Since you have figured out how to resolve the problem please change the title from [Q] to [solved] this way if someone else has a similar problem they will know that they can find a answer here.
Sent from my Nocturnalized One XL using Forum Runner
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.