Database Develop

Anyone sucessfully tether?

I have been unable to start a wireless tether. When I open barnacle the default verizon hotspot app pops up and gets in the way. Anyone else experiencing similar behavior or find a way around it?

I attempted both the stable and beta versions of wireless tether to no avail (the AP starts, but with errors).

Do the hotspot app hack for the droid3! It works perfect.

suzook said:
Do the hotspot app hack for the droid3! It works perfect.
Click to expand...
Click to collapse
Have directions?

suzook said:
Do the hotspot app hack for the droid3! It works perfect.
Click to expand...
Click to collapse
Even with the Droid3 being 3G and the Bionic 4G??? The different radios/modems don't make a difference?

suzook said:
Do the hotspot app hack for the droid3! It works perfect.
Click to expand...
Click to collapse
Yeahhh.... I'll wait till we have clockwork working first.

suzook said:
Do the hotspot app hack for the droid3! It works perfect.
Click to expand...
Click to collapse
I came across that walkthrough, but didn't want to be the first to try. Thank you for taking the gamble and spreading the news (this should probably get its own post).
Sent from my DROID BIONIC using xda premium

http://forum.xda-developers.com/showthread.php?t=1182940

I followed that tutorial and when I activate Mobile Hotspot in the Mobile Hotspot app this notification pops up:
"Checking Provisioning with the Verizon Server."
then the "On Device Provisioning" screen pops up in the background, followed by a notification saying:
"Retrieving terms and conditions.
Please Wait"
finally, it throws the error
"Your order could not be processed.
If you would like to subscribe to the service, call:..."
I rooted the device using Pete's oneclick and ran his scripts in DROID_3_remove_bloat_5_6_890.zip keeping the launcher, messaging apps, DLNA, social features, motoprint, and swype. Does anyone have any insight as to why I am getting this message or what I should try to get this to work?
Edit: I should note that I am trying this on 4G. I could see how this is only possible on 3G, as the radio may use different means of authentication for 4G. If this were to be the case, there might be a second set of parameters that can be modified.

I would love to use the droid 3 wireless solution but i have got to the step of plugging the phone into the computer after having all drivers and the radiocom program installed and it the phone info does not show up
please confirm anyone who has got this to work that the phone is to be in PC Mode.
Again I have all the drivers installed have .net installed and the radiocom program and the phone usb in pc mode
I am running windows vista home 32bit machine
has anyone ran into a similar problem and corrected it that you might share
thanks

[HOW-TO] Get 4g Hot Spot (Infrastructure) to work after MOD'ng

Ok,
So, I, along with a few others, pay for the Unlimited Mobile HotSpot and want this app to work as other (root) tethering apps only allow Ad-Hoc.
Here's what I did to get it to work on my Windows 7 x64 Computer as of just a few moments ago and I do plan to work on this issue to get this figured out.
I've discovered that the /data/misc/dhcp/udhcpd.conf file is what controls the DHCP addressing for the 4gMobileHotSpot App. Within this app, I discovered (in the Modded ROM (as of now, I have Gingervolt1.1)), that the "Option DNS" addresses were completely wrong. This was apparent from the get go as they were internal IP address starting with 192.168.x.x.
The steps to get this app working on Windows is:
0 - Be Rooted (Sorry, just had to point the obvious out in Step 0)
1 - Use the market and download/install the Text Edit (Paul Mach) App
2 - (TESTed and Working), Use AntTek (root) Explorer and navigate to:
/data/misc
3 - Long Press the udhcpd.conf file and select to open with the Text Edit App
4 - Change the 'option dns' from 192.168.x.x to 66.174.92.14 69.78.96.14 and save/exit
5* - In Windows, set the IPV4 Properties to:
Use Following Address:
IP Address: 192.168.1.5 (or anything in between start and end range in text file)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Use Following DNS server addresses:
Preferred DNS Server: 66.174.92.14
Alternate DNS Server: 69.78.96.14
6 - Start 4gHotSpot App
7 - Tell Windows to Connect and you should be connected.
NOTE: It is late and I know that this will become clearer as time goes on and since I have to work in the morning, this is the best I came up with in a few minutes after figuring out that the hang up was with this file, in which I knew it's been a DHCP issue all along. Why this file is changed with the Modded ROMs is beyond me and I doubt MT changed this, so likely it is something to do with the DE-odex or some other modification of this app and it's initialization. Just deleting the CONFIG file will only cause it to write a new one with the wrong values again.
For those who do use this app, it is known to stop responding at times and I am going to look into that. I'm thinking this is a DNS issue and will try some other DNS Servers (8.8.8.8 I believe is a Google public DNS)..
In the meantime, this is a start for anyone to add to this that has more DHCP/DNS/Network experience. I don't have another android device handy to test the connectivity, so will have to get that figured out.
Key point here is, is that the 4gHotSpot App gets corrupted with the Custom ROMs and for some reason sets up wrong DNS servers in the Config file.
Hope to see some thoughts, additions, fixes, to this problem with this being pointed out, from others. I will continue to work on it throughout this next week after work.
Last Note: The DNS server numbers came from the original Config prior to rooting/modding. Also, I do know that is it redundant to have them in the config file AND the Windows Properties. It's just that setting Windows to 192.168.1.1 (option router in the Config file) didn't work. Again, will work on cleaning this method up and simplifying.
-Cybie

Thought I would give this a try today after re-rooting. I had no luck getting connected with the 4g hotspot app.
On my phone the file was in /data/misc/dhcp/ and the values were already correct in the file.
I tried changing the dns to a public one and back - neither worked.
I tried moving the file to /data/misc and it didn't work.
My ipad seems to connect ok but hangs trying to lease an ip address. Reloaded v6 tot and upgraded to non-rooted gingerbread and the app works again.
Is it possible you changed something else?
I'm glad it's working for you. Wish I could get it working as this is the only thing keeping me stuck on a non-rooted phone.

displacedbuck said:
Thought I would give this a try today after re-rooting. I had no luck getting connected with the 4g hotspot app.
On my phone the file was in /data/misc/dhcp/ and the values were already correct in the file.
I tried changing the dns to a public one and back - neither worked.
I tried moving the file to /data/misc and it didn't work.
My ipad seems to connect ok but hangs trying to lease an ip address. Reloaded v6 tot and upgraded to non-rooted gingerbread and the app works again.
Is it possible you changed something else?
I'm glad it's working for you. Wish I could get it working as this is the only thing keeping me stuck on a non-rooted phone.
Click to expand...
Click to collapse
Ok, so here's what I did after reading your post:
1 - Corrected the path (Sorry, it was late and I missed that /dhcp portion of the path).
2 - Deleted "option router 192.168.1.1" from udhcpd.conf file
3 - Deleted "option dns x.x.x.x x.x.x.x" from udhcpd.conf file
Set Windows up with the Following:
Static IP : 192.168.1.2
Subnet : 255.255.255.0
Gateway : 192.168.1.1
DNS Servers : 4.2.2.1 & 4.2.2.2
That worked.
So, what I am seeing if I try to use DHCP on Windows is that the 4gHotSpot gives the computer 192.168.16.x addressing even though the config file is set to give out 192.168.1.x addresses (x=2 through 254). It also gives Windows 3 DNS servers that are local IP addresses and will never go anywhere.
What to do now? Figure out what is being changed with the Custom ROMs that is causing the app to act like that. In fact, it will act like that when I restore back to Stock GB Rooted via restore from backup in CWM, but I have yet to test deleting the config file and restarting 4gHotSpot to test. I will do that over the weekend as I don't have a lot of time I can have my phone down during week. But I do plan to up to the GingerVolt1.3 tonight.
As of right now, I am using my windows machine connected to the 4gHotSpot App to write this post. Also, I don't know about the iPhone/iPad and possible settings. If you can Force (Set a Static IP) then follow what I did up above, but you will also need to set the DNS servers and not sure you can do that on an Iphone/iPad.
The DNS Servers I listed are found on a public list and are also said to be Verizon DNS servers...
The other problem I found and is an issue with the app, is using auto b/g/n will cause the hotspot to lose connectivity. When in that mode, I connect at 65Mbps, but it drops down to 6Mbps and stalls and fluctuates. I set it to 'g' only and get a SOLID 54Mbps connection just like the tether apps.
SPEED TEST Results: 18.35 Mbps Down, 10.66 Mbps Up without a glitch.
Obviously this app works with DHCP addressing as STOCK. So, I will begin my Android Development with figuring out one of two things. Either get this app to work as it's supposed to, or create a root app with 'Infrastructure' based on whatever I can find in the coding for this app if I can figure out a way to decode it.
I personally hate the idea that you can't connect other android devices to AdHoc and also annoys me to have to manually connect Windows since it doesn't seem to have the ability to automatically connect to AdHoc Networks. Linux does perfectly fine with auto connect AdHoc, go figure. Android is Linux Based, yet can't AdHoc, but provides an AdHoc as an access point for other devices. weird, lol.
Let me know if any of this helps, but do know I am going to continue to figure this out. I'm sure de-odexing the app had something to do with it as I'm sure Verizon did their best to keep this app from being hacked for free HotSpot service.
-Cybie

Thanks for the detailed response.
I'm going to try again. I won't be able to try until tonight or tomorrow morning when I have time to play with it and roll back if necessary.
I'll let you know if it works or I find out anything else.

Before you install a ROM and have the app working, try connecting your computer and get the values (ip, dns, gateway, etc.) That the app dhcp assigns and post that. Rooting the phone alone shouldn't break the app either. By getting those values posted, would help and also save me from downgrading just for that purpose. Knowing that it works with without a mod is one thing,. So my focus is working on getting it to function with a modded ROM.
It's strange that i can get the app to work if i force the connecting device to values (static settings), but this doesn't help with certain devices and needs to connect via dhcp.
-Cybie
Sent from my VS910 4G using XDA App

from unrooted:
ip: 192.168.1.2
subnet: 255.255.255.0
router 192.168.1.1
dns 66.174.95.44, 69.78.96.14
search domains: local
Still haven't retried the root and may need to wait another day or so until I have some more time

displacedbuck said:
from unrooted:
ip: 192.168.1.2
subnet: 255.255.255.0
router 192.168.1.1
dns 66.174.95.44, 69.78.96.14
search domains: local
Still haven't retried the root and may need to wait another day or so until I have some more time
Click to expand...
Click to collapse
These number are from your connected device? What device are you connecting that give you such numbers? I'm not familiar with the iPad and how it displays connection details. Is that what that is from?
I'm still able to connect after updating to GingerVolt1.2 and manually installed 4gHotSpot app. I just got home with little time to work on this project for the night, so I will update what I can if any changes in getting things to work.
-Cybie

those numbers were from an ipad connected via dhcp.
I'll see if I can use a laptop at work today to see the values I get connecting from a laptop. Should be the same I would imagine.
I will retry rooting the stock rom tonight and see what happens.

displacedbuck said:
those numbers were from an ipad connected via dhcp.
I'll see if I can use a laptop at work today to see the values I get connecting from a laptop. Should be the same I would imagine.
I will retry rooting the stock rom tonight and see what happens.
Click to expand...
Click to collapse
Sounds good. Those numbers will help.
I will add, though, that someone posted a way to get the wifi tether to work with the Revolution, here in the forum. The problem, though, is that it's connection via 'n' mode, which would be great, except it drops out. If you try to download something that's fast (or going to speedtest sites), you will find that that happens and what everyone is complaining about the HotSpot app not working. All that needs to be done is changing it to 'g' only mode and a solid connection.
Anyhow, I will see if I can figure out how to get that app working on 'g' only mode also, and if I do, then I will just use that app instead. Otherwise, I plan to continue to figure out the 4gHotSpot App
-Cybie

Cybie,
Glad to see someone's tackling this...I don't suppose your work here could be applied in a way that would make this app work for those who don't pay for the mobile hotspot?
I am waiting on a replacement Revo to arrive in the mail, should be here tomorrow or Saturday. Any values I can pull that might be of use to you before I get happy with flashing roms, rooting, etc?
I find that the OpenDNS nameservers tend to work pretty well everywhere I use them, if you wanted to give them a try:
Primary: 208.67.222.222
Secondary: 208.67.220.220

jamRwoo said:
Cybie,
Glad to see someone's tackling this...I don't suppose your work here could be applied in a way that would make this app work for those who don't pay for the mobile hotspot?
I am waiting on a replacement Revo to arrive in the mail, should be here tomorrow or Saturday. Any values I can pull that might be of use to you before I get happy with flashing roms, rooting, etc?
I find that the OpenDNS nameservers tend to work pretty well everywhere I use them, if you wanted to give them a try:
Primary: 208.67.222.222
Secondary: 208.67.220.220
Click to expand...
Click to collapse
Sorry for the delay. Been working extra hours at work and haven't had the energy to do much with this past couple days.
Anyhow, no, I don't intend to try to get it working for those who do not pay. Why? There are apps out there for this and the only reason I was trying to get this to work properly was for the fact that it would be nice to have the proper connection for those who do pay. I say that because the HotSpot app actually has a faster wifi connection (using n mode) than the tether (root) apps out there, with the exception of the one posted at:
http://forum.xda-developers.com/showthread.php?t=1339150
Unfortunately I am having the same issue with the HotSpot and that app (using infrastructure mode) when connecting. They both to link up at 65Mbps. In fact, I got 72Mbps with the wifi Tether app from the link, but like the HotSpot app, I have issues with the connection dropping out using 'n' mode.
The HotSpot app will allow you to set it to 'g' only mode, though only get a 54Mbps link speed, but sustains a solid connection with no drop outs. Others say they don't have that issue, so it may just be my wifi adapter??? I am going to test it on my laptop, but if I remember, I did have that same issue with the laptop, so maybe it's just my phone??
Either way, I am going to be doing what I can to get 4gHotSpot to work correctly with rooted/modded ROMs. Strange thing is, rooted, it still works fine. After installed modded ROM, it fails to work. And if I restore back to factory rooted via CWM, it still doesn't work. You actually have to restored/flash back to total stock. After that, you can root with it working, but not after installing a ROM.
-Cybie

Any luck with the fix?

OK, so I read that your hotspot worked fine after rooting, but stopped with the ROM was changed.
I rooted my phone yesterday, using the one button method. I have not modified the phone beyond this change. As far as I can tell the only functionality problem I have is with the hotspot.
The tether method continues to work (as I am using it right now). The hotspot does make a wifi connection to my devices but there never is any received data from the network.
Please help, any ideas on what I should look at or change?
Thanks ahead of time.
Steve

ALTANertive said:
Any luck with the fix?
Click to expand...
Click to collapse
I've been doing testing. Please read below for some more of my findings.
sgschwend said:
OK, so I read that your hotspot worked fine after rooting, but stopped with the ROM was changed.
I rooted my phone yesterday, using the one button method. I have not modified the phone beyond this change. As far as I can tell the only functionality problem I have is with the hotspot.
The tether method continues to work (as I am using it right now). The hotspot does make a wifi connection to my devices but there never is any received data from the network.
Please help, any ideas on what I should look at or change?
Thanks ahead of time.
Steve
Click to expand...
Click to collapse
I've noticed something very strange with the HotSpot and Rooting.
If you root, the HotSpot continues to work. But, if you reboot after rooting, that's when the failures begin. So, I am thinking that the files are being overwritten. I've been able to test with clean root, root with tether app, and restore without root.
Without root, the HotSpot continues to work fine as I have been using it for the past two weeks as I need it for my new WiFi Tablet. There is the WiFi app the allows for Infrastructure, but that also allows devices to connect via N-Mode, where I have issues of the data dropping out. Forcing b/g only on my HotSpot app, I have very reliable service.
I am planning (after my trip) to root my phone, copy some DHCP files before ANYthing can be changed and before rebooting. Comparing these files and seeing if anything changes there. If so, that will allow me to create a simple app to restore these files back to stock, either automatically, or through 'starting' of the app.
I haven't forgotten about this issue and It's something that I am needing to figure out. The problem is time right now. For the past few months, I had to work a job in order to keep bills paid. That job took a lot of my hours I used to have to figure things out. I am going to be having limited time available, but do plan to work on it some more in the next few weeks, especially since i want my Tablet to work flawlessly with my phone, as that is my ONLY source of internet and I DO pay for the HotSpot service.
-Cybie

Thanks for the update.
Like you I also pay for the 4g hotspot. I jumped on it when they offered the unlimited for $30.
Now that I've tried the gingervolt rom and the supercharger script I don't think I can go back. It just feels like a totally different phone.
I haven't had as much need for it recently so I haven't tried one of the other tethering apps.
Thanks for plugging along on this.

Yes, thanks for looking at this.
Here is some more observations:
Using your set ip and other setting I can get the hotspot to work. Two of my devices are not able to set a fix address without rooting them. So they do connect but only my PC will download a web page.
Here is the address my Revo is setting on the other two devices: 192.168.16.30 and .31.

Ok, so here's an update to this issue.
I have tracked the problem down to a failure to write to the udhcpd.leases file within the /data/misc/dhcp folder.
So, I did some searches on the net about a few things, but there's not much information regarding the "paid" HotSpot feature vs the (Root) Tether Apps.
What I did comes across, though, is there seems to be some sort of issue with certain versions of busybox relating to the udhcpd.conf. I also found the file that gives the 192.168.16.x addresses. But, by the time I found it, the phone already goofed up the HotSpot app settings and things weren't working. So, next round of factory restoring via LGNPST/Tot, I will seek into that and see what I can find out.
It's weird that the 4g HotSpot app will work flawlessly on the initial boot (Rooted, ROM'd, and even OC'd). But, after a reboot of the phone (once or twice), it becomes corrupted and non-working. It's going to be related to some sort of permissions issue and some file that is able to be corrupted/changed with the root/superuser access. I had similar results with fresh restore and JUST root, so the ROM's have nothing to do with it as far as I am concerned at this point.
In case you might ask. I Refreshed phone to total stock, rooted, and then, all at one shot, installed Gingervolt 1.3, OC, and Hotspot before rooting phone. HotSpot worked fine until the next reboot, where it did work for a few minutes then Kaboom! Nodda.
If someone can access (pull) the /system/var/lib/misc/udhcpd.leases file from a fresh stock phone, or even first-time booted, rooted phone, I would appreciate that as this file may be something in question, but my file was already changed by the time I found it.
-Cybie

I love to help but mine isn't working either. Can you get me started on returning the phone back to stock? I did install a backup util, and ran it first thing after rooting. But I am guessing that wasn't soon enough.
I will take a look at the file I have, I will try the two viewers I have, not sure if they will work.
I did run a restore, and the hotspot did work afterwards. My signal is very weak -110 dBm right now so if you can tell me how to copy/view the file I can get it for you (I did check my tools and could find the file but could not view it, I tried to email it to myself but the encoder couldn't handle it).
By the way, are you aware of a bug in the hotspot, tethering. When you turn off the hot spot and start tethering the hotspot comes back on and tethering will not start. It take a phone power turn to fix it.

sgschwend said:
I love to help but mine isn't working either. Can you get me started on returning the phone back to stock? I did install a backup util, and ran it first thing after rooting. But I am guessing that wasn't soon enough.
I will take a look at the file I have, I will try the two viewers I have, not sure if they will work.
I did run a restore, and the hotspot did work afterwards. My signal is very weak -110 dBm right now so if you can tell me how to copy/view the file I can get it for you (I did check my tools and could find the file but could not view it, I tried to email it to myself but the encoder couldn't handle it).
Click to expand...
Click to collapse
EDIT: When you copy these files, Don't view them until you zip up a copy first. They could potentially get corrupted. not likely, but with the way it's going with this 'project', who knows.
adb pull /data/misc/dhcp datadhcp (This will copy files from phone to a created directory called datadhcp)
Also, and more importantly, this is what I am really wanting:
adb pull /system/var/lib/misc varmisc (copies to created varmisc folder)
AND
adb pull system/etc/dhcpcd dhcpcd (copied to dhcpcd folder)
The created folders and files will be in the same 'dos' directory you have adb in. You can use the folder in which the all in one root is from MT if you are wondering where to get that by any chance.
Those would be a big help in getting thing figured out. At least, if those are the culprits.
NOTE: In order to have non-corrupted files, these have to be pulled from a fresh restore via LGNPST / Tot method. A restore via nandroid backup will not work. those files, once corrupted, seem to remain so, even after a restore for some odd reason, unless you were lucky enough to not have them corrupted prior to backing up, which would likely mean you rooted, rebooted into recovery and backed up before rebooting into your phone.
By the way, are you aware of a bug in the hotspot, tethering. When you turn off the hot spot and start tethering the hotspot comes back on and tethering will not start. It take a phone power turn to fix it.
Click to expand...
Click to collapse
Please clarify on this. Are you referring to starting the 4gHotSpot, shutting it down, and then starting a (root) Tether App??? If so, I haven't really had that issue because once I have to use the root apps to tether with, that usually means my HotSpot won't work at that point. I will say, however, I have had an issue where the HotSpot didn't want to shut down. I just go into Services/App Management and force a shutdown instead of a reboot. A bit quicker....
-Cybie

I will take a run at copying this stuff later today.
On the hotspot bug. Even before rooting, or upgrading to GB there was this bug, and it is still there after GB.
Once the hotspot has been started and then the user shuts it down it appears to shut down. Then the tethering (the application that came with the phone) is initiated it looks like it is tethering but the hotspot icon comes on after the phone has finished tethering and indeed it is running that way too.
I tried this five time last night: Restored the hotspot both application and data (titanium app), installation part of the application would fail but T said it was complete. Launched the application and two of the five times the PC had the correct IP address, the other three times it had the corrupted ones. Also when the PC did come up correctly the second device's IP address was corrupted. So I may need to fiddle a bit to fine the uncorrupted files after restore.
Perhaps someone else could help with copies the files too?

[Q] Tethering after JB update (iptables help?)

Hello All,
My tethering hasn't worked since the upgrade, regardless of root, method or hack. It appears to set up the network fine and the laptop connects, but I can't pull up a site and troubleshooting points to DNS errors.
So it seems (after loads of research) that this is a known issue... But it's not an issue so much as a "feature" for our carriers: Apparently Jelly Bean allows Carriers to recognize and block tethering. That's why some folks lose tethering, and some don't. The "issue" is a switch that was enabled at the carrier's end.
For those of you who know that you are supposed to be able to tether per your agreement, the solution should be as easy as calling your provider and having them enable tethering.
For those (like me) who have been sneaking in the back door and wish to continue to do so, the fix seems to lie in iptables (root required). The simplest version I found was entering this in terminal:
Code:
su -c "iptables -tnat -A natctrl_nat_POSTROUTING -s 192.168.0.0/16 -o rmnet0 -j MASQUERADE"
...where "rmnet0" is replaced with the interface specific to your device. Apparently after this, one should be able to tether normally.
(Reference Android Google Code reported issue 38563, see comments 122, 125 & 131. Sorry... too noob to be able to post links)
Unfortunately this didn't work for me, but more than likely because I haven't a clue what I'm dabbling in. I sought out my "interface" by running "netcfg" in terminal with tethering disabled, and chose qmi0 (the one with a xx.xxx.xx.xx format IP address, the same as shows for the phone when it's successfully online). Does anyone know enough to see my mistake, or otherwise be able to help me with this?
Thanks in advance!

Actually FoxFi released an update that supports usb tethering and wifi hotspot for the Droid 4. No root required.
You have to uninstall earlier versions of FoxFi and it's certainly worth it to get the paid version!
You do have to establish a password/pattern unlock for your phone which I find slightly annoying, but that's the workaround FoxFi found to make it work under JB and certainly worth the minor inconvenience.
Works great! I am writing this from my tablet tethered through hotspot to my Droid 4.
I had a custom rom installed because I need the wifi hotspot, but now I can thankfully go back to the (extensively TiBu cleaned) stock rom since the CM roms all have unacceptable bugs and/or instabilities IMHO.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

Thanks for your response berndblb... I must admit, you got my hopes up!
Alas, it seems my problem runs deeper than FoxFi's solution. I downloaded, installed and gave it a shot, but basically got the same stuff I'd acco mplished already with root: I can build a network, I can connect to it (really adds to the optimism), but I can't reach the DNS server. No joy. My guess is that FoxFi still only manages to bypass Verizon's block, but not the switch that's the problem inherent to JB.
And so I maintain my hope to find a resolution via iptables as described here https://code.google.com/p/android/issues/detail?id=38563.
Help?

Strange, I can tether just fine on my Droid 4 (Verizon) with unlimited data using the SQL database edit and the stock Mobile Hotspot app.
I'm not supposed to have tethering but just browsed the web on my tablet tethered to my Droid 4 with no issues.
Who is your carrier? Every other Verizon Droid 4 owner who has done the SQL edit has been able to tether....

tcrews said:
Strange, I can tether just fine on my Droid 4 (Verizon) with unlimited data using the SQL database edit and the stock Mobile Hotspot app.
I'm not supposed to have tethering but just browsed the web on my tablet tethered to my Droid 4 with no issues.
Who is your carrier? Every other Verizon Droid 4 owner who has done the SQL edit has been able to tether....
Click to expand...
Click to collapse
Thanks for your response.
I'm with Rogers here in Canada (AT&T's counterpart). Agreed about the SQL database edit having been the trick. That's all it took to get me rolling in ICS with the stock hotspot app. When I upgraded to JB, I removed the entitlement check in the SQL database and thought I was set... but no joy. Everything looks good right up until I try to pull up a website. That's when I realize I'm not getting to the DNS Server, and therefore unable to surf. I know nothing's changed on Rogers' end, because I can still tether if I drop my SIM back in my old D2G.
My research led me here: https://code.google.com/p/android/issues/detail?id=38563#c122. Previous comments explain that tethering is now blockable at the carrier's end (what Verizon was attempting to add with their "entitlement check"). Comment 122 narrows down the source of this block as IP address related, and suggests a fix that worked for him. To quote:
I'm not sure exactly what it means for the device to "properly flag when data is for tethering purposes" (comment #105). My own observation was that the outbound data on the 'rmnet0' interface wasn't being NATted. The phone's IP address on that device was (for example) 10.182.48.29 and all its *own* data was coming from that address. And responses from the Internet were coming back just fine.
The phone assigns IP ranges in the 192.168.0.0/16 range to its clients on the USB and wifi tethering. And those 192.168.x.x addresses were being seen on the outbound rmnet0 interface unmolested. Perhaps that's how we're *supposed* to indicate that it's tethered data, and we let the carrier perform NAT for us at their end?
Either way, running this command seems to have 'fixed' it for me, and with my Samsung Galaxy S3 on Orange UK I now get functional tethering again:
su -c "iptables -tnat -A natctrl_nat_POSTROUTING -s 192.168.0.0/16 -o rmnet0 -j MASQUERADE"
Obviously there's nothing preventing your carrier from assigning addresses in the 192.168.0.0/16 range to the device itself, and I have no idea what the various rmnet[012] devices are, so this isn't a "fix" for the general case but most people with a rooted phone should be able to work it out from here...
Click to expand...
Click to collapse
Assuming I'm on the right track (symptoms are the same), I'm looking to figure out how to adapt this to work for me. Unfortunately messing with iptables is well over my head. Sigh...

Yeah i had the same problem FoxFi Worked for me as well

this will forcefully allow tethering no matter what...
If this is over your head, do NOT do it! You can permanently brick your phone!!!
http://forum.xda-developers.com/showpost.php?p=15931904&postcount=1
This goes to the hardware level and mods things to make it look just like your phone is pulling the data not tethering.
Technically this will work on any and every motorola phone

je2854 said:
this will forcefully allow tethering no matter what...
If this is over your head, do NOT do it! You can permanently brick your phone!!!
http://forum.xda-developers.com/showpost.php?p=15931904&postcount=1
This goes to the hardware level and mods things to make it look just like your phone is pulling the data not tethering.
Technically this will work on any and every motorola phone
Click to expand...
Click to collapse
Thanks for your recommendation je2854.
Good news: successfully made the changes, and phone is not bricked.
Bad news: same trouble as before. I can create a network and connect to it, but can't get a DNS server (for either USB tether or WiFi Hotspot).
Really frustrated here. I've reverted to a trashy LG L7 as my primary phone. Slow and no hardware kb, but at least it works. Sigh... Droid 4 going back in the drawer until someone figures out how to rewind to ICS.

Just an FYI about the method posted above.
It is only for legacy 3G CDMA/EVDO devices like the Droid 3 and does not work at all on any LTE capable device with SIM based authentication.
But the good news, as stated by tcrews above, is that wifi tethering works just fine under 4.1.2 using the SQLite Editor entitlement check mod and also
WiFi Tether for Root available in the Play Store works very well under 4.1.2.
Use the Generic JB wlan1 profile and netd-ndc(master) setup method and it works as it always has under previous OS versions.
I am tethered to my D4 right now posting this with the latest cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml build released a week or so ago flashed on it.
It works!

cellzealot said:
Just an FYI about the method posted above.
It is only for legacy 3G CDMA/EVDO devices like the Droid 3 and does not work at all on any LTE capable device with SIM based authentication.
But the good news, as stated by tcrews above, is that wifi tethering works just fine under 4.1.2 using the SQLite Editor entitlement check mod and also
WiFi Tether for Root available in the Play Store works very well under 4.1.2.
Use the Generic JB wlan1 profile and netd-ndc(master) setup method and it works as it always has under previous OS versions.
I am tethered to my D4 right now posting this with the latest cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml build released a week or so ago flashed on it.
It works!
Click to expand...
Click to collapse
speaking of flashing... I have purchase one of your OTG adapters.... b-e-a-utiful work you have there!
works amazing! even on the HP TouchPad! (it charges faster like it should)
Also you are correct, I used to have a D3 and that hack works well...
could you kinda point me in the right direction of the SQLite hack? I have that and would like to try it...
(Although I already have tethering enabled via family share)

WaHoo!! Consider yourself kissed!
I'm typing from my tethered laptop. Not sure what did the trick, as I've tried WiFi Tether before with no joy.
I did flash the 18_2 JB, though, and tried the WiFi Tether settings you recommended. Up and running. And grinning.
THANKYOUTHANKYOUTHANKYOU for bringing my Droid4 back out of the drawer it was banished to a couple months ago!
cellzealot said:
Just an FYI about the method posted above.
It is only for legacy 3G CDMA/EVDO devices like the Droid 3 and does not work at all on any LTE capable device with SIM based authentication.
But the good news, as stated by tcrews above, is that wifi tethering works just fine under 4.1.2 using the SQLite Editor entitlement check mod and also
WiFi Tether for Root available in the Play Store works very well under 4.1.2.
Use the Generic JB wlan1 profile and netd-ndc(master) setup method and it works as it always has under previous OS versions.
I am tethered to my D4 right now posting this with the latest cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml build released a week or so ago flashed on it.
It works!
Click to expand...
Click to collapse

Yay!! Congrats! Glad to help out...D4 is still a great device and for better or worse it is still "best in class" of all the hardware qwerty keyboard phones.
Good luck!

none of above work for me.
verizon build # 9.8.20-72_vzw-18(debloated with script)
entitlement check edit works and keeps thru reboot
sqlite editor (install in play store)
goto:
settings storage: (hammer and wrench icon. says "com.Motorola.Android.providers.settings" below it)
settings:
66 entitlement_check:
long press over the 1, change to 0 and click save
exit and reboot
native hotspot works

[Q] WiFi Tether Won't Work (even with correct settings)?

I'm running OMJ's ROM and using WiFi Tether TrevE Mod "Version 3.2-beta-modv5-***Synergized***"
Okay so even with the settings that everyone recommends for the HTCone, and a few modifications, I still cannot get the blasted thing to work.
Settings I've tried:
Profile: Generic ICS/JB(wlan0)
Setup-Method: Auto
Encryption ON (p/w is the correct format AFAIK, about 12 lowercase letters no numbers, similar to the default)
Changed SSID to "HTCone" no spaces
Wifi Driver Reload (1) checked
MSS Clamping checked
Routing Fix checked
With those settings, I can't even get it to broadcast. It says it's running but no devices can find it. It simply isn't there.
If I disable Wifi Driver Reload (1) it begins broadcasting. However, when I attempt to connect, the second device just sits there at "Obtaining IP Address..." for about 90 seconds then retries and gets stuck at "Authenticating" then back. An endless loop never resulting in a connection.
The most frustrating thing about this is that it was JUST working the day before. I didn't touch ANYTHING and it just decided to take a dump.
Addendum: I was looking at the notes in the bottom of the ABOUT screen and I noticed the updates are quite old. Is it possible I have an old version that doesn't work with the HTC One? I got it from QBKING77's website.

Happened to me and don't have an answer. I wiped and didn't restore anything to resolve it. Restoring data broke it again.
Sent from my HTCONE using xda app-developers app

I followed this guide that worked for my Note II and I have no problems. I'm typing this message from my laptop tethered to my ONE. I have WiFi-driver reload 2 checked.

gk1984 said:
Happened to me and don't have an answer. I wiped and didn't restore anything to resolve it. Restoring data broke it again.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
klbjr said:
I followed this guide that worked for my Note II and I have no problems. I'm typing this message from my laptop tethered to my ONE. I have WiFi-driver reload 2 checked.
Click to expand...
Click to collapse
I had no luck wiping the phone and re-installing the ROM. It was still FUBAR after the fresh flash of OMJ. What drives me NUTS about that is the fact that it was JUST working not 12hrs before it stopped working.
To give some more information as to the issue, it appears that checking either one (or both) of the Force Driver options causes it to not broadcast at all. If either of those two are checked, the hotspot isn't even visible to any device. If left unchecked, the hotspot becomes visible. However, upon trying to connect to the hotspot, it gets stuck in a loop of "Authenticating..." then "Obtaining IP address" which never results in a connection.
I've tried the options listed in that guide you posted, but to no avail.
So, at this point, I'm wondering if it's just because I'm using an outdated WiFi hotspot app. If anyone has one that's been updated since a little under a year ago, I'd appreciate a link. Thanks!

wolfbuck22 said:
I had no luck wiping the phone and re-installing the ROM. It was still FUBAR after the fresh flash of OMJ. What drives me NUTS about that is the fact that it was JUST working not 12hrs before it stopped working.
To give some more information as to the issue, it appears that checking either one (or both) of the Force Driver options causes it to not broadcast at all. If either of those two are checked, the hotspot isn't even visible to any device. If left unchecked, the hotspot becomes visible. However, upon trying to connect to the hotspot, it gets stuck in a loop of "Authenticating..." then "Obtaining IP address" which never results in a connection.
I've tried the options listed in that guide you posted, but to no avail.
So, at this point, I'm wondering if it's just because I'm using an outdated WiFi hotspot app. If anyone has one that's been updated since a little under a year ago, I'd appreciate a link. Thanks!
Click to expand...
Click to collapse
Not sure which one you are using but I'm using the one right from the Play Store v3.3 beta 2. You can also get it from here. I just went back to SWG 1.18 from a 4.2.2 ROM and reinstalled and all is good. Everything connects just fine using those settings from the link I posted earlier.

klbjr said:
Not sure which one you are using but I'm using the one right from the Play Store v3.3 beta 2. You can also get it from here. I just went back to SWG 1.18 from a 4.2.2 ROM and reinstalled and all is good. Everything connects just fine using those settings from the link I posted earlier.
Click to expand...
Click to collapse
In the first post I listed which version I was using. Unfortunately, even the newest version fails to work. I don't get this. Maybe it has something to do with the OMJ ROM and how close to stock it is. Perhaps I should try a different ROM.
This is a far cry from the CM7 ROM I had on my EVO which allowed me to tether perfectly all the time without the hassle. Maybe I'll try CM again on my One.

I'm gonna download & flash OMJ's ROM & see if I can recreate it. You running the latest version right?
Sent from my HTCONE using Tapatalk 4

klbjr said:
I'm gonna download & flash OMJ's ROM & see if I can recreate it. You running the latest version right?
Sent from my HTCONE using Tapatalk 4
Click to expand...
Click to collapse
There was some kind of minor update that just came through. Not sure what it was. I haven't installed it yet. My version is current as of a week ago.

wolfbuck22 said:
There was some kind of minor update that just came through. Not sure what it was. I haven't installed it yet. My version is current as of a week ago.
Click to expand...
Click to collapse
Sorry. I downloaded the latest yesterday but was playing around with flex's & hawk's 4.2.2 ports. I'm about to flash in a couple mins and will post my results.

Similar issue here
I'm having issues with wifi tether on my HTC One, as well. I can tell you that if you set the Device-Profile to "Auto," it will create an ad-hoc connection that my Windows 7/Ubuntu Studio desktop will recognize. Ubuntu recognizes it as a regular wifi hotspot, and connects automatically. Windows recognizes it as an ad-hoc connection, and I have to connect manually. My Samsung Galaxy Tab 3 does not see the connection at all, and neither does my LG Blu-Ray player. If I change the profile to Generic ICS/JB (wlan 1), then other devices see the connection, and will even attempt to connect to it, but there is never a successful connection with internet access. If I choose Generic ICS/JB (wlan 0), then nothing sees it as a viable connection. I am running the stock sense ROM, and have done no updates (so I'm still at JB 4.1). I can tell you that wifi tether errors frequently for me, and I have to reboot quite a lot. If I leave my phone broadcasting overnight, then in the morning wifi tether thinks that I don't have root, and gives me the "your phone is in an unknown state" error message; at that point, the only way to stop the wifi is to reboot.
So, I can make it work, for a limited number of devices. I would like to use it as a wifi connection for my tablet and my Blu-Ray player, however. I have searched quite a bit to try to figure this out, and I haven't been able to find a reliable answer. Any help would be appreciated. Thank you.

I got mine to work. Can surf the web, check email, etc. now the damn thing will not stream video. I am connected to 4g and speed test on my ipad verify it but won't stream. Pisses me off.

wolfbuck22 said:
I'm running OMJ's ROM and using WiFi Tether TrevE Mod "Version 3.2-beta-modv5-***Synergized***"
Okay so even with the settings that everyone recommends for the HTCone, and a few modifications, I still cannot get the blasted thing to work.
Settings I've tried:
Profile: Generic ICS/JB(wlan0)
Setup-Method: Auto
Encryption ON (p/w is the correct format AFAIK, about 12 lowercase letters no numbers, similar to the default)
Changed SSID to "HTCone" no spaces
Wifi Driver Reload (1) checked
MSS Clamping checked
Routing Fix checked
With those settings, I can't even get it to broadcast. It says it's running but no devices can find it. It simply isn't there.
If I disable Wifi Driver Reload (1) it begins broadcasting. However, when I attempt to connect, the second device just sits there at "Obtaining IP Address..." for about 90 seconds then retries and gets stuck at "Authenticating" then back. An endless loop never resulting in a connection.
The most frustrating thing about this is that it was JUST working the day before. I didn't touch ANYTHING and it just decided to take a dump.
Addendum: I was looking at the notes in the bottom of the ABOUT screen and I noticed the updates are quite old. Is it possible I have an old version that doesn't work with the HTC One? I got it from QBKING77's website.
Click to expand...
Click to collapse
Try to go to advanced settings at the upper right portion of the settings. Then click LAN Settings > Reset to default settings. I have the same problem with you. I've tried it and it worked.

[Q] VZW Moto X as Hotspot

So I am strongly considering the Moto X not that Verizon has Moto Maker and the 32GB verizon. The one thing I love on my current phone running CM10.2 is the ability to tether my laptop to it for internet access without getting charged extra by verizon while I travel. Usually in a monthly billing cycle when traveling with work I'll consume about 20GBs of data. Can I do this with the Moto X without getting charged tether fees? Do I need to root it to do this?
FYI: I'm i'm on an unlimited plan

If you root with RockMyMoto, yes..
For using Wifi Tether for Root app, see -> http://forum.xda-developers.com/showthread.php?t=2449534 You MUST use the specific version now linked in the first post, or it wont work.... In other words, do NOT get the version from the Play store. (I'm using this way with my Rooted X, also unlimited plan)
To use the built in tethering app see -> http://forum.xda-developers.com/showthread.php?t=2443562 (I haven't tried it, but there are many reports in that thread of it working).
If you don't want to root, then you could try Foxfi. Not sure if it works, I've never used it.

I have always used THIS, on multiple phones. I'm on the 3.3 beta 2 and it works fine. Go into settings, and make sure the device profile is Generic ICS/JB (wlan0), and check the WiFi driver reload, MSS clamping, and Routing fix options.

gokart2 said:
I have always used THIS, on multiple phones. I'm on the 3.3 beta 2 and it works fine. Go into settings, and make sure the device profile is Generic ICS/JB (wlan0), and check the WiFi driver reload, MSS clamping, and Routing fix options.
Click to expand...
Click to collapse
For some reason I couldn't get that version to work on my Verizon X. While the PC and tablet saw the X, it saw it as WLAN0, and never properly connected to the phone.
The thread I linked to has a patched version that works properly for me, including seeing the "hot spot" as the SSID I set on the phone, and letting the PC and tablet connect to the phone and get to the internet.

The x is awesome for one. All u gotta do is root and follow the thread to use built In tethering appreciate. Works great. Or better yet flash Nitro's eclipse ROM. Its all done and its a great rom
Sent from my XT1060 using xda app-developers app

KidJoe said:
For some reason I couldn't get that version to work on my Verizon X. While the PC and tablet saw the X, it saw it as WLAN0, and never properly connected to the phone.
The thread I linked to has a patched version that works properly for me, including seeing the "hot spot" as the SSID I set on the phone, and letting the PC and tablet connect to the phone and get to the internet.
Click to expand...
Click to collapse
I did notice the wlan0 where on the other device I had u could change it or use the ssid, but my tab and others will connect? The initial connection always funks up, usually just have to cycle WiFi from the device and cycle tether too. U try reboot, fix perms, and cache/dalvik wipes? Haven't tried modifying that system apk, heard about some issues and this never gives much, if any.

gokart2 said:
I did notice the wlan0 where on the other device I had u could change it or use the ssid, but my tab and others will connect? The initial connection always funks up, usually just have to cycle WiFi from the device and cycle tether too. U try reboot, fix perms, and cache/dalvik wipes? Haven't tried modifying that system apk, heard about some issues and this never gives much, if any.
Click to expand...
Click to collapse
I tried everything. Yes.
I liked the way wifi tether worked on my past phones. Using the patched copy found in this thread -> http://forum.xda-developers.com/showthread.php?t=2449534 , which is also needed for the GNex w/4.2, works just like it did on my Bionic, Thunderbolt, and other past phones. No issues. After initial config and allowing SU, just launch the app, tap to start tethering, go to my PC, Tablets, etc.. and connect and go.
The APK is originally from https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c109 however, I just noticed lower down in that discussion a patch was added to the experimental 3.4 ( https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c197 ) so I might try that.
I don't feel the need to mess with those system files to use the phone's built in tethering app. I don't have to. I only offered that because some were using it since Wifi Tether for Root wasn't working.

KidJoe said:
I tried everything. Yes.
I liked the way wifi tether worked on my past phones. Using the patched copy found in this thread -> http://forum.xda-developers.com/showthread.php?t=2449534 , which is also needed for the GNex w/4.2, works just like it did on my Bionic, Thunderbolt, and other past phones. No issues. After initial config and allowing SU, just launch the app, tap to start tethering, go to my PC, Tablets, etc.. and connect and go.
The APK is originally from https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c109 however, I just noticed lower down in that discussion a patch was added to the experimental 3.4 ( https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c197 ) so I might try that.
I don't feel the need to mess with those system files to use the phone's built in tethering app. I don't have to. I only offered that because some were using it since Wifi Tether for Root wasn't working.
Click to expand...
Click to collapse
editig one cell in the system settings to get the built-in hotspot app to work is hardly messing with the system files. i've done this on my last three phones and they've all worked flawlessly. plus the built-in app has decent security features.

640k said:
editig one cell in the system settings to get the built-in hotspot app to work is hardly messing with the system files. i've done this on my last three phones and they've all worked flawlessly. plus the built-in app has decent security features.
Click to expand...
Click to collapse
I know you read the one thread I posted a link to as you asked about doing the SQL edit, and posted a screen shot from your D4.. Its OP talks about replacing a bunch of APK files which are system files...
In Post #24 of that thread, thepolishguy the SQL tweak doesn't work.
... hence my saying I didn't want to mess with a bunch of system files.
Not to mention, side loading an APK and using it is easier. It might not be "cleaner" or seem as "integrated" but it works.

Awesome thanks everyone. I defintely plan on rooting my phone and installed xposed.