Related
anyone found an alternative car charger, I dont mean using the wall charger with an inverter
but a charger that plugs into the lighter plug?
Contra1971 said:
anyone found an alternative car charger, I dont mean using the wall charger with an inverter
but a charger that plugs into the lighter plug?
Click to expand...
Click to collapse
I used this on my Palm Pre. It charges my Epic 4g, and I tried it out on the Nook Color this AM.
It worked just fine.
http://cgi.ebay.com/OEM-SPRINT-CAR-...Accessories&hash=item45f6ea76fc#ht_1484wt_905
There's qutie a number of cigarette lighter adapters available that offer a standard USB port. You'd supply your own cable. Here's an example:
http://cgi.ebay.com/Mini-Car-Cigare...053289?pt=PDA_Accessories&hash=item2a0eed35e9
No, AFAIK, none of these will charge as fast as the standard NC charger. For that, you'd need to go thru the hassle of getting an inverter.
Monoprice has cigarette lighter to female usb chargers for $1.16 that you can use your usb cable with.
Sent from my DROIDX using XDA Premium App
well I bought 1 from Wally World and it has a dual USB output abd says it is .5v and 1.5amp but when I plug in my NC it doesnt say charging
does the sprint charger?
Jgrimoldy said:
No, AFAIK, none of these will charge as fast as the standard NC charger. For that, you'd need to go thru the hassle of getting an inverter.
Click to expand...
Click to collapse
Why is that any more of a hassle than getting a car charger?
Contra1971 said:
well I bought 1 from Wally World and it has a dual USB output abd says it is .5v and 1.5amp but when I plug in my NC it doesnt say charging
does the sprint charger?
Click to expand...
Click to collapse
Yes, the Sprint charger says 'charging' As the others stated, it's not fast, but it works just fine...
it isnt more of a hassle, I have 4 inverters, but they all have fans and make noise I wanted to use a NO noise charger thats all
d.v said:
Why is that any more of a hassle than getting a car charger?
Click to expand...
Click to collapse
Larger, heavier, more cords, much more expensive (when compared to a $1 cig-to-usb)...
Just has to be able to push out the current needed. Otherwise it may not charge, or it will charge very slowly.
The Scosche reVIVE II Dual USB Car Charger for iPad has 2.1 and 1.0 amp usb outlets, I use this for plugging in my evo and nc. It definitely charges them both even while having all the wireless radios going and tethering with gps and both screens full bright.
Contra1971 said:
it isnt more of a hassle, I have 4 inverters, but they all have fans and make noise I wanted to use a NO noise charger thats all
Click to expand...
Click to collapse
Same issue here, I have a road-trip coming up this summer and I'd love to load up my NC with music and dash-mount it but it'll be a 14-20 hour drive (depending on the number of whiz breaks the wife and kids need) and I don't think I could push the battery quite that long and the inverter when wired to the radio creates quite a buzzing.
jsw31 said:
The Scosche reVIVE II Dual USB Car Charger for iPad has 2.1 and 1.0 amp usb outlets, I use this for plugging in my evo and nc. It definitely charges them both even while having all the wireless radios going and tethering with gps and both screens full bright.
Click to expand...
Click to collapse
Are you using the Nooks specific cable on the 2.1A connection? I too am going on a trip soon, and would love a car charger that can actually CHARGE the nook while using it..
www.amazon.com/Scosche-reVIVE-Dual-Charger-iPad/dp/B003N7NO4Q
Is this the one you have? It looks nice and the price looks okay. Nice find. I also saw a wall plug dual usb version by same company on the same page, do you have any info on that one too? It would be nice to stream line travel chargers to a minimum, thanks.
It definitely charges both. Like I said in my previous post, I usually have both my Evo runniong and the Nook full bright display on for 50 minute commute, using TetherGPS, wifi hotspot, torque and bluetooth, google navigation pulling satellite imagery, and playing mp3s. Granted, it is slower to charge than without all that stuff running but my previous car charger would lose charge with my evo running just gps and no wifi hotspot previously.
I am using stock blackberry usb cables that I ordered from Amazon as well for $1.25 for a pair (google 'B001UC9NOQ', can't post links yet.) These are nice, thick cables that handle the charger great. I leave them plugged in inside the truck at all times. I have not used that Scosche wall charger, I use the stock chargers for travel that remain in my backpack, and I have other usb cables I use to charge at home. I would imagine it works just as well though.
jsw31 said:
It definitely charges both. Like I said in my previous post, I usually have both my Evo runniong and the Nook full bright display on for 50 minute commute, using TetherGPS, wifi hotspot, torque and bluetooth, google navigation pulling satellite imagery, and playing mp3s.
Click to expand...
Click to collapse
http://www.amazon.com/Scosche-reVIVE-Dual-Charger-iPad/dp/B003N7NO4Q
Luckily I'm used to carrying extra USB cables around but the noise my inverter generated while charging was super annoying, went ahead and ordered this to try it out. Hoping it works for what I need, thanks for the tip
projektdotnet said:
http://www.amazon.com/Scosche-reVIVE-Dual-Charger-iPad/dp/B003N7NO4Q
Luckily I'm used to carrying extra USB cables around but the noise my inverter generated while charging was super annoying, went ahead and ordered this to try it out. Hoping it works for what I need, thanks for the tip
Click to expand...
Click to collapse
Let us know if it works for you. An Amazon reviewer just reported that the Scosche reVIVE II didn't work on their Nook Color:
The nook color needs 1.9 amps, this can't do it. Scosche claims 2.1 amps but it isn't even close. It BARELY charges the nook if the machine is sleeping, when on, the battery charge goes down even while supposedly "charging." Playing video, it's even worse. On top of that if I try to charge a regular phone it puts out too much amperage on the 1 amp side and overheats the phone. Save your money, look elsewhere.
Click to expand...
Click to collapse
However, the reviewer may not know what they're talking about. A charger cannot put out "too much amperage." Too much voltage perhaps, but not too much amperage (current). A device draws only the current it needs.
An iPad needs an amperage around 2 A also. I got the Belkin Charge 2.1 made for the ipod/ipad and it DOES charge the nook color. It has a 12V plug with one USB outlet at 2.1A. I used the cable from the nook color obviously...
See, part of my worry is not the current output, but if the nook can actually communicate with these chargers and get a full 1.9A draw, instead of the detault 500mA over non B&N chargers...
cybrdmn said:
An iPad needs an amperage around 2 A also. I got the Belkin Charge 2.1 made for the ipod/ipad and it DOES charge the nook color. It has a 12V plug with one USB outlet at 2.1A. I used the cable from the nook color obviously...
Click to expand...
Click to collapse
I bought the same Belkin iPad charger from Best Buy. Rated at 2.1A. I used it with the B & N USB cable that came with my Nook Color. I used the 'Battery Monitor' software mentioned earlier here or on another post to compare charge current readings against the stock B&N wall charger/cable. The Belkin was charging right at 500 mA (NC was using ~450 mA, software showing +36 mA current). So somewhere the B & N cable & charger must have a unique way of determining that it is a B&N charger / cable and to allow the full 2.1A charge. I used the Belkin 12V charger on my TomTom and it allowed just over 1A charge, so I know the Belkin iPad charger is fine.
Yes, it does charge the Nook Color, if you are at 800 Mhz and minimum brightness running non-intensive applications--and it barely charges at that ~50 mA. It does turn the charge indicator on the B&N cable orange, and the status indicates battery charge on the screen.
Hello guys,
I'd like to know if anyone here has experience of using a different brand charger to charge Foccus.
I have a Nokia E7 which comes with 1200ma microUSB charger. The one which comes with Focus is 700ma.
Since the battery of Focus is 1500ma rating, I guess there shouldn't be any issues?
Also, charging Focus via it's own charger takes too long to charge. So, using a 1200ma charger will charge it faster as well. Also, it's be far more easy to only plug one charger on power outlet.
Just want to be sure if anyone else has already tried non-Samsung charger with Focus, or any other recommendations / suggestions, before I plug my Focus with Nokia charger.
Thanks,
// chall3ng3r //
I've used a bunch of different methods to charge my Focus.
The supplied wall charger, a couple different car chargers, a motorola, LG, and Uniden wall charger, several USB ports on various computers...
So far, no magic smoke has escaped...
Hi,
Thanks for your reply and giving me some idea to try our the Nokia charger with my Focus.
As soon as I read your reply, I put my Focus on charge, and it's more than 20 mins without any smoke
I guess it'll be just fine
Thanks again.
// chall3ng3r //
I've also used and successfully swapped chargers for:
Omnia 2
Omnia 7
LG E900
Focus
Any charger/phone combo worked, with no issue.
Hello guys,
Are you still charging with other chargers? , have you gotten any issues yet?,
Please comment cuz I really bored to wait the slow and annoying charging of my standart package.
Rds
mika1982 said:
Hello guys,
Are you still charging with other chargers? , have you gotten any issues yet?,
Please comment cuz I really bored to wait the slow and annoying charging of my standart package.
Rds
Click to expand...
Click to collapse
I also bought from ebay one additional battery and a battery charger (charges the battery directly). Works perfectly. (If interested, search "BATTERY USB CHARGER FOR SAMSUNG i9000").
With 2 batteries you don't need to wait for a charge/leave the phone to charge. I just leave the other battery to charge and swap it when the one in the phone is low. Besides, you have a backup this way too.
I'm charging with microUSB Nokia charger, Nexus One charger, and even iPhone charger with microUSB cable. There is no issue.
I'm using the charger from a Galaxy Ace and no issues.
I have used LG optimus charger and iPad charger (Which comes with 2100 ma output) no issues. But none of these changed or reduced the charging duration (including iPad's!!!)... It is taking 2.5 to 3 hours to completely charge... USB ports output is generally 300ma-500ma, so definitely not recommended!!
I went from an OG droid to the revolution. The car charger i used to use for the moto droid was charging that phone very fast, just like the ac charger. Now with the revo, it's pretty damn slow. I tried shorting the data pins with some solder and the revo actually dropped about 200mv worth of charging current. Strange. I thought shorting the data lines together put the phone into fast charge but when i "cat /proc/kmsg" it says "charging at 0mv" even though it is actually charging at about 400mv as verified by a ammeter. My home charger gets "charging at 1800mv". Some strange stuff. I'm gonna try the ipod method of 2.8/2.0 unless someone else can chime in here. Thanx
I'd be interested in this also. I'm using New Trent USB battery pack and I want it to be acknowledged by the Power Manager as a fast charge source -- not the "computer connected USB" source it shows as now.
I use a store bought adapter, with the verizon/LG cord I got with the phone, and if I use Google Maps and Navigator, I lose power while I am plugged in. Glad to see I am not the only one with the "issue"
I figure its just the way the phone charges, not anything to do with any bugs or what not, so I never really worried about it. I just make sure I am fully charged before I need to use the power sucking apps.
markapowell said:
I use a store bought adapter, with the verizon/LG cord I got with the phone, and if I use Google Maps and Navigator, I lose power while I am plugged in. Glad to see I am not the only one with the "issue"
I figure its just the way the phone charges, not anything to do with any bugs or what not, so I never really worried about it. I just make sure I am fully charged before I need to use the power sucking apps.
Click to expand...
Click to collapse
On USB "computer powered" I've found maps and weather apps suck battery much faster than it can recharge. I noticed that the car adapter is detected as "AC Powered" -- even though it's starting off as 12VDC. I was hoping to use the external USB battery pack to keep the internal battery full while using the maps and weather in our boat --- but after 5 hours with screen on and battery pack attached at "USB Computer" recharge rates, the internal battery was flat-out DEAD, and the external pack was only down about 35%.
We just need to figure out what the data lines want to see for a "dedicated charger" type-2 charge connection which will yield the full 1800mv like the ac charger does. I'm working on this...hope i don't fry my phone's usb controller
My problem is, i don't have a charger that shows up as such. My friend's last night did, i may try to get that from him and sniff the connection for resistance values etc.
Hey...I'll leave that level of wizardry to you! Good to know there is a possible answer.
Sent from my Revolting VS910 4G using XDA Premium App
I too would be very interested....thanks for the post
High Speed Charging
Dear All:
I do alternate energy research and we deal with Li battery packs all the time and have seen fires from improper charging. It is okay to advise rom and other software mods but when dealing with electricity it is possibly life threatening. We do not want to read in the next days post about a member dying in his sleep due to a fire. Please use utmost care when you post soldering and wireshorting hacks. We do not know the technical level of the person on the other end.
Second-most, the quality of third party chargers is very shoddy and they do not follow IEC or UL codes which adds another danger factor.
For example I bought a Chinese made Lamptron inverter for my cathode lights and the input wiring was wrong could have fried my gaming rig if I didn't check.
I understand your convern but 1800mA is the charge rate of the wall (ac) charger. That's what we're trying to achieve with a car charger. If you buy crap you're asking for problems. Most car chargers can output 2 full amps @5v but are setup to only charge at 500mA. USB charging of smart devices utilizes the data+ and data- lines as charge mode indicators. Small changes in resistance (therefore voltage) changes how the phone will pull amperage. I think everyone knows the danger of overheating lithium-ion batteries. We're not trying to do anything more than what the wall chargers already do. Check out xda a bit more and you'll see lots of posts about this very subject for different phones. Like this one. Or check out Ladyada's ipod charging research for some other good info. FYI, a good source of CCFL inverter parts is in old broken lcd tvs. Cheap, easy and reliable.
Now that that's out of the way, i set up a breadboard today so i can check some things out but had no time to test so hopefully tomorrow i can give some insight as to what the revo wants data line wise so it goes into "type 2" 1800mA charge mode. Will post with what i find and maybe some pics.
Alright. I just dug in for an hour and found out some things. My wall charger supplies 3.68vdc on both the data+ and data- lines. While using this charger the phone (using /pro/kmsg) goes into "type=2" charging mode with 1800mA. So. I hooked up my car charger. I noticed 2.1vdc on only one data line. So i made a quick resistive divider up to bring both data lines up to 3.68. BAM...didn't work. I also tried shorting the two data lines together while at 3.68v....nope. Then i threw a potentiometer in between the two data lines and tried a few values up to 200ohms....nope. I then pulled all connections to the car chargers data lines and supplied a fresh 3.68v to the output cable...nope. Last thing i did was just use my power supply to supply the 5v and gnd without the car charger in the loop....still couldn't get a type 2 charge. I'm losing my mind here. I think i missed something stupid or am over thinking this. I might start from scratch later but first, i need a few cigarettes. I'm hoping someone can chime in with a simple fix and call me stupid
I found another charger i had bought from radio shack a while ago. It's a PointMobl charger. Plugged it in and got an 1800mA type=2 charge. Sweet. Now i'm gonna dig into it and see why it works....plus i'm ditching the damn spiral cord cuz they piss me off.
I'm using the wall charger from a Moto Razr, and it puts the Revo into fast charge. I found the pinouts here: http://pinouts.ru/all/razrv3_charger_pinout.shtml
Any new insight from that?
[I'm Revolting -- are you? Beamed directly into your brain by Revolt 1.3]
Danzdroid said:
I'm using the wall charger from a Moto Razr, and it puts the Revo into fast charge. I found the pinouts here: http://pinouts.ru/all/razrv3_charger_pinout.shtml
Any new insight from that?
[I'm Revolting -- are you? Beamed directly into your brain by Revolt 1.3]
Click to expand...
Click to collapse
Some phones are like that. Common usb is 4 wire, micro usb adds another pin. That pin needs to get a 200ohm resistor jumped to the shorted d+/- lines. The thing is, the wall charger only has 4 pins like every other usb. Unless the cable itself has the extra pin connected to the data lines through a resistor, it still doesn't explain the difference. I haven't taken this other charger apart yet, actually, i don't think i can without destroying it as it looks to be sonic-welded at the seams. What happened to the old screw-ended cig lighter adapters??
deftonesmw said:
Some phones are like that. Common usb is 4 wire, micro usb adds another pin. That pin needs to get a 200ohm resistor jumped to the shorted d+/- lines. The thing is, the wall charger only has 4 pins like every other usb. Unless the cable itself has the extra pin connected to the data lines through a resistor, it still doesn't explain the difference. I haven't taken this other charger apart yet, actually, i don't think i can without destroying it as it looks to be sonic-welded at the seams. What happened to the old screw-ended cig lighter adapters??
Click to expand...
Click to collapse
Probably one too many people opening them and electrocuting themselves. Or glue is cheaper than metal screws.
Sent from the awesomsness, that is my phone. Rev, Revolt 1.0, swype, go launcher.
deftonesmw,
I wanted to say I'm looking forward to your findings. In the meantime, I ended up buying a car charger that claims high ma charging. It sounds like Danzdroid has issues with his battery pack charger which could possibly benefit from your research too.
Wall charger: 100 to 120 AC converted to low voltage dc
Car: 12v DC no conversion, probably resistance regulated.
Stating the obvious the wall charger is a complete different beast from the low voltage computer/car charger. With out a 12v dc to ac converter I don't think you will ever get a car to charge like a wall charger.
Your radio shack device probably uses some type of capacitor device to ramp up the juice then runs it through some sort of regulator which simulates the AC style charge.
Or at least if I was designing one that is how I would do it.
Haxcid said:
Wall charger: 100 to 120 AC converted to low voltage dc
Car: 12v DC no conversion, probably resistance regulated.
Stating the obvious the wall charger is a complete different beast from the low voltage computer/car charger. With out a 12v dc to ac converter I don't think you will ever get a car to charge like a wall charger.
Your radio shack device probably uses some type of capacitor device to ramp up the juice then runs it through some sort of regulator which simulates the AC style charge.
Or at least if I was designing one that is how I would do it.
Click to expand...
Click to collapse
My car charges like a wall charger. It's not about inverting alternating to direct. It's about getting the phone to pull the amperage. Regardless of what the max current is, the phone has modes of charging. It will pull what it's directed to pull depending on the charge mode it's put into by either d- and d+ voltages and/or resistance across certain conductors. Most car chargers can produce a full 2 amps, that's not saying they are actually doing that though. It all depends on what the phone is taking, not what the charger is giving. You're looking at this the wrong way. 90% of chargers are capable of the output (dc car chargers), it's the phone that desides what to pull according to the chargers instruction (data lines and/or 5th micro pin). The charger's maximum output is equal to the fuseable value it contains. So. Yes, my car charger charges the same as my wall charger. By the way, capacitors by themselves store energy, they don't "ramp" anything. The only caps in my car charger are for smoothing as far as i can see. It's all about resistance, not capacitance. A wall charger is just a car charger with an inverter before it in the sequence. In fact, you could open a wall charger up and split the two circuits, apply 12v to the dc half's input traces and get the same effect....without the ac components even in the same room.
20 buck solution.
Buy inverter.
plug in AV charger.
Enjoy AC charging in your car.
I'm working on a real solution to this but for now an inverter is a good workaround
"Home-Less and happy"
K0G said:
20 buck solution.
Buy inverter.
plug in AV charger.
Enjoy AC charging in your car.
I'm working on a real solution to this but for now an inverter is a good workaround
"Home-Less and happy"
Click to expand...
Click to collapse
lol...i was doing the same thing for a while
deftonesmw said:
I found another charger i had bought from radio shack a while ago. It's a PointMobl charger. Plugged it in and got an 1800mA type=2 charge. Sweet. Now i'm gonna dig into it and see why it works....plus i'm ditching the damn spiral cord cuz they piss me off.
Click to expand...
Click to collapse
I went to Radio Shack today and got one of these. It shows up just like the ac charger does. I will be able to use it in my car dock for navigation and not have to worry about the running the battery down. At least that is what I am hoping for.
Is anyone aware of a wireless charger that would enable the fast charging speeds of the charger in the box?
discstu37 said:
Is anyone aware of a wireless charger that would enable the fast charging speeds of the charger in the box?
Click to expand...
Click to collapse
I believe the limitation of Qi is 500 - 700 mA unfortunately.
I think, but not sure, that you can use and qi wireless charger as long as it's connected with the included (and rather large) Droid Turbo power adapter.
tonyf7 said:
I think, but not sure, that you can use and qi wireless charger as long as it's connected with the included (and rather large) Droid Turbo power adapter.
Click to expand...
Click to collapse
I cant imagine you would need to use the turbo charger for this. Like SBC44 said the speed is going to be limited fairly low with wireless charging. It wouldn't be possible to charge that fast with wireless technologies, at least not with the current technology. The turbo charger moves a lot of juice.
Here is some good reading if your interested.
http://en.wikipedia.org/wiki/Inductive_charging
From the article "Slower charging – due to the lower efficiency, devices can take longer to charge when supplied power is equal."
discstu37 said:
Is anyone aware of a wireless charger that would enable the fast charging speeds of the charger in the box?
Click to expand...
Click to collapse
I dont think so.. wall chargers are more powerful than wireless chargers.. Wireless chargers are still need to improve alot..
Wireless charging takes more than overnight!
Do not waste your money on the Verizon wireless charger. The battery in this is so big that even overnight does not bring a phone that was down to 25% up to a full charge.
Thanks for letting us know. I was about to buy the Verizon wireless charger 2 days ago when I was buying all my accessories for the phone. Would've been a bummer to find out how slow the wireless charger chargers. Thanks.
Sent from my XT1254 using XDA Free mobile app
The TYLT brand wireless charger is capable of normal wall plug speeds. It will be much faster than the average Qi charger but at the same time the turbo charger is amazing. I do not know of a charger that can charge as fast as the turbo charger but this TYLT brand is pretty good. The only reason I would get a wireless charger is to reduce wear and tear on my microUSB port (the culprit for retiring most of my previous android devices).
I also think its common knowledge that rapid charging and discharging of LiPo batteries reduces the overall life expectancy. I'm not sure what Motorola is doing with this whole "rapid charge and non removable battery" thing. Its possible that Turbo users can prolong the life of their batteries by charging at normal rates but I honestly don't have enough info to make a confident statement about that.
Here's the fastest Qi charger that I know of right now:
http://www.tylt.com/vu/
Sent from my XT1254
ccheww said:
The TYLT brand wireless charger is capable of normal wall plug speeds. It will be much faster than the average Qi charger but at the same time the turbo charger is amazing. I do not know of a charger that can charge as fast as the turbo charger but this TYLT brand is pretty good. The only reason I would get a wireless charger is to reduce wear and tear on my microUSB port (the culprit for retiring most of my previous android devices).
I also think its common knowledge that rapid charging and discharging of LiPo batteries reduces the overall life expectancy. I'm not sure what Motorola is doing with this whole "rapid charge and non removable battery" thing. Its possible that Turbo users can prolong the life of their batteries by charging at normal rates but I honestly don't have enough info to make a confident statement about that.
Here's the fastest Qi charger that I know of right now:
http://www.tylt.com/vu/
Sent from my XT1254
Click to expand...
Click to collapse
I also use the Tylt Vu and am very pleased with it. Looking forward to their wireless car dock.
SBC44 said:
I also use the Tylt Vu and am very pleased with it. Looking forward to their wireless car dock.
Click to expand...
Click to collapse
Is there an actual model thats being advertised for release? Ive been searching everywhere for the right wireless car dock. Im trying to minimize my usage on the microUSB port.
That goes for everyone. If you know of any good wireless Qi car mounts /docks that would be superb. I drive all day every day.
ccheww said:
Is there an actual model thats being advertised for release? Ive been searching everywhere for the right wireless car dock. Im trying to minimize my usage on the microUSB port.
That goes for everyone. If you know of any good wireless Qi car mounts /docks that would be superb. I drive all day every day.
Click to expand...
Click to collapse
Their website just says coming soon, but Android Police did a hands-on post about it a couple of weeks ago. Looks like the price will be about $80 (!).
I currently use this wireless car dock and haven't had any problems with it..
I was thinking of getting this car mount, but wasnt sure how it would work with the turbo. I have a few questions for you;
do you have a case on it? if so which one... i have the otterbox commuter...
what car are you using it in?
are you using the suction cup or vent connection?
any info would be helpful!
~Cesium
h tp : / / a mz n . c o m / B 00 F 5 XP C SC
sorry won't let me post links yet... been a long time lurker on xda first time poster
I'm not using a case on the Turbo, but I used it with an HTC One M8 with a Commuter case and it worked fine. I drive a Chevy Avalanche and mounted the cradle using a ProClip vehicle mount and one of their adapter plates for an XM Radio believe it or not. That matches up pretty well with the tab on the back of the Choetech mount, but I did have to wrap a few rubber bands around the tab so it was tight enough.
I've used this one for close to a year with various devices. It does charge at 1.2a but is limited by the wireless receiver, most are .75a or less. That being said, this unit works great with my BN turbo. It is always at 99-100% after about 7 hours on night stand even when starting below 20%. Currently I'm not using a case, but I have a Commuter case I used for awhile and the wireless charger still worked fine through the case.
May be available in the end of 2015!
Right now there is no wireless charger that supports faster charging but it will soon be available in the end of 2015 as it is under developing state.
I have the Tylt and it says it supports the rapid charging. I can't say it is as fast as the wall charger since I've only had it a few days, but it does seem that the initial charge is very fast.
Also, very stylish. The wife doesn't even complain about leaving it on the night stand.
Bought the TYLT when I pick up the DT its well worth the $75. It charges faster than all my other home Qi chargers and it keeps the phone at a decent angle for viewing. It is not able to keep up with the draw of TS3 Viewer though, but not really a normal issue. I use this charger everyday and it will charge the phone from sub 15% to full overnight. Consequently I normally use this charger to charge up my wife's S5 and it seems to charge at a similar rate to her normal Samsung charger. I like useing this charger over the turbo charger simply because it should help the battery to last longer.
As far as dash mount I use the iOttie Easy Flex Wireless Qi Charger. That one maintains battery levels with the screen always on running Dash and Google Play (it also almost keeps up with running GPS ie. Waze/Google Maps) I posted an extensive reply in a later thread about that charger.
i bought the TYLT and love it. when i turn droid off and put it on TYLT and droid turns on itself. how do i keep droid off while charging? thanks.
bringing this back as I just bought this device. curious to see if there are any fast wireless chargers available yet? i do see QI wireless charging pads, but not sure if that is what I want. thanks!
jco23 said:
bringing this back as I just bought this device. curious to see if there are any fast wireless chargers available yet? i do see QI wireless charging pads, but not sure if that is what I want. thanks!
Click to expand...
Click to collapse
I don't think any have hit the market yet. I have several of the tilt Qi chargers all over the house, so I love wireless charging.
This is truly weird. I can now only charge my Verizon Droid Turbo with a USB port on the computer or the charger from a Google Nexus 7 tablet or the car charger. No other charger works including the one that came with the phone. Turbo charging stopped working months ago, but I really didn't care because I didn't need it.
Anybody heard of anything like this?
Bring the charger that came with the phone (and phone) of course to Verizon. They should be able to replace it.
Appreciate the quick response
I will to that but I really want to know how this could have stopped charging on all the chargers it was working with just 2 days ago. These same chargers work with anything but this one phone.
BiffHenderson said:
I will to that but I really want to know how this could have stopped charging on all the chargers it was working with just 2 days ago. These same chargers work with anything but this one phone.
Click to expand...
Click to collapse
I'm guessing one is charging via data connection, the rest knows it's charge mode?
I have exact issue. My phone actually drains s few percentage points while on the charger. If I plug into charger at night at 40%, my morning it is 3%. Assuming charger or cord was bad, I used old Droid Max cord. That worked for a few days, then not. Same with car charger. Now I am using Bose Sound link charger. Any ideas?