Why on the standard GB keyboard there is a GO button for txt but when i try to enter anywhere else its gone for other things like v6 supercharger and enter options i enter the number on txt but where do you tap to enter it? Track ball works for stored apps. But where do i enter for options on v6 cause trackball dont work?
---------- Post added at 08:37 PM ---------- Previous post was at 07:39 PM ----------
Found it volume rocker
Related
I'm looking for insight on why my "adb install" command sometimes works and sometimes does not. Again to be clear, I was able to use the command several times successfully, but not consistently.
This week I purchased the Nook Touch, and using the wiki I was able to root it successfully. With much patients and effort I was able to get all the apps loaded up, accept Button Savior Root ver. 1.1.1
As I have been doing this I have had problems with "adb install". Sometimes it will load the .apk file and sometimes it will not. I have tried renaming the .apk files, moving them to other directories.... and sometimes, these tricks will work.
Here is a sample error message I am getting. Any insights would be appreciated, my nook experience will be easier with Button Savior loaded.
*******COPIED FROM DOS COMMAND PROMPT ******
C:\Users\amy\Downloads>adb connect 10.0.0.6
connected to 10.0.0.6:5555
C:\Users\amy\Downloads>adb shell
# adb install com.smart.swkey-imported-apk [I enter this line]
adb install com.smart.swkey-imported-apk [System comes back with this]
adb: not found [System comes back with this]
#
***** Edited 3 minutes after I posted this **********
So right after I posted the above question, I thought I would try one more time to install the app.... and it worked. You can see from the log that I did nothing different. I'm still interested in anyone's ideas on why this sometimes works, and sometimes not.
----copied from dos command window -----
C:\Users\amy\Downloads>adb connect 10.0.0.6
connected to 10.0.0.6:5555
C:\Users\amy\Downloads>adb shell
# adb install com.smart.swkey-imported-apk
adb install com.smart.swkey-imported-apk
adb: not found
# exit
exit [It was right here that I posted the above commands, and then I tried it again below]
C:\Users\amy\Downloads>adb devices
List of devices attached
10.0.0.6:5555 device
C:\Users\amy\Downloads>dir *.apk
Volume in drive C is TI102618W0G
Volume Serial Number is 2A48-CCF8
Directory of C:\Users\amy\Downloads
06/17/2011 12:32 AM 1,657,343 133adw.apk
06/16/2011 09:47 PM 1,392,535 Amazon_Appstore-release.apk
06/18/2011 03:22 PM 624,675 button.apk
06/17/2011 02:23 AM 4,915,762 com.amazon.kindle.apk
06/17/2011 11:32 AM 1,844,811 com.android.vending.froyo.apk
06/17/2011 03:48 PM 1,844,811 com.android.vending_2.2.6.apk
06/17/2011 02:33 PM 13,241,537 com.opera.browser-1.apk
06/17/2011 02:35 PM 751,542 com.opera.mini.android.v6.0_update3.apk
06/18/2011 03:22 PM 624,675 com.smart.swkey-imported.apk
06/17/2011 12:06 AM 12,130 NookColorTools_0.2.apk
06/17/2011 10:15 AM 13,241,537 Opera_Mobile_11_Android.apk
11 File(s) 40,151,358 bytes
0 Dir(s) 196,977,213,440 bytes free
C:\Users\amy\Downloads>adb install button.apk
560 KB/s (624675 bytes in 1.088s)
pkg: /data/local/tmp/button.apk
Success
C:\Users\amy\Downloads>
The adb driver will sometimes just kick off for some reason. This happens on my nook and transformer. I will be doing something then it will stop responding. Then I just simply plug back the cable after I pull it out and it works fine. Frustrating as crap along with drivers not installed message even when I just used the damn thing connected to my computer a few seconds earlier. If I knew why it did that....I would be happy. What is worse is when you plug the tablet in and then it says device not found...
Perhaps it's a typo in your forum posting, but compare the following lines, 1st taken from your "log", 2nd taken from your directory listing:
com.smart.swkey-imported-apk (-apk)
com.smart.swkey-imported.apk (.apk)
whenever i tried to use terminal and enter the command "sh" ...... i prints "sh - applet not found" ?????
anyone has answer for it ?????? Please ! answer soon !!!!!
Strange sh should work by default
did you give superuser rights to the terminal ?
you should install busybox and then try
---------- Post added at 05:58 PM ---------- Previous post was at 05:35 PM ----------
And may i know for what are you trying to use sh?
do you want to run a script ?
Busybox?
nail16 said:
Strange sh should work by default
did you give superuser rights to the terminal ?
you should install busybox and then try
---------- Post added at 05:58 PM ---------- Previous post was at 05:35 PM ----------
And may i know for what are you trying to use sh?
do you want to run a script ?
Click to expand...
Click to collapse
Dear i tried to install busybox but it gave me errors that i have others busybox already installed .....
And i had this error because i was developing in eclipse and mounting i9000 as emulator ..... Error was "sh - applet not found"
sh is unix/linux comandline shell. When you open terminal sh run automaticaly
Solved !!!!!
I just changed my firmware back to JVU from JW4 and problemo solved ...... Thanx Anyway Guyz
Is anybody else unable to activate Android Device Manager as a Device Administrator on the Note 4?
If you go into your security settings menu, device administrators, Android Device Manager is listed there with a checkbox next to it. I click on the checkbox, get a screen asking me if I want to activate it as a device administrator, and when I click activate, nothing happens, it remains unchecked. Without it as a device administrator, it won't be able to remotely wipe the device. I wonder if this is because Samsung wants us to use their service for that? If someone could check on this for me, I'd really appreciate it!
Same thing here
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
Go to the link below, find your device & enable it. That just worked for me.
https://www.google.com/android/devicemanager
That did it! Thanks larosa
What's up with this? Works fine on Nexus 5. Web link works as a fix.
OK so when I plug in my phone into my computer I get this "Allow USB Debugging" prompt. It shows my RSA fingerprint for my computer and everything. The problem is that I cant press the "OK" button on the prompt, i can only press "CANCEL". Please help out guys :good:
I have exactly the same problem, have you found any fixes?
---------- Post added at 02:58 PM ---------- Previous post was at 02:54 PM ----------
If you restart in safe mode using the steps below, the OK button works:
http://www.tomsguide.com/faq/id-3535152/samsung-galaxy-note-safe-mode.html
I will start by saying that i am no expert. I went to the website https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a to unlock my bootloader. Even though my device is eligible, the website told me it wasn't. So I looked for a workaround.
I found this post.
https://forum.xda-developers.com/z2-force/how-to/tutorial-getting-unlock-code-to-wait-t4026031
Replacing the link below with Part1 part3 and part4 with my unlock data i got from my phone using [fastboot oem get_unlock_data] (refer to post for help). After Filling out the below HTML link with your info and copying and pasting it into the web browser and hitting go, it will either come back with an error or give you the bootloader unlock code right away.
https://support.motorola.com/us/en/api/mse/bootLoaderVerifyPhone?serialNo=[/url][[[Part 1 here]]]&secSerialNo =&processorUid=[[[Part 4] here]]&bootloaderHash=[[[Part 3]]]&info Only=N
Even though their website said my Device was ineligible through there little program, I used that trick and got a code for unlocking the bootloader.
Code Worked, Have had Zero Issues. Good Luck!!
Credit goes to rcmaehl. Thank you
Original Post is here - https://forum.xda-developers.com/z2-force/how-to/tutorial-getting-unlock-code-to-wait-t4026031
Post edited:
You have to remove the hashtags "#" from the code you get from the phone.
Remove the quotes "Part1" from the link below.
Code:
https://support.motorola.com/us/en/api/mse/bootLoaderVerifyPhone?serialNo="Part1"&secSerialNo=&processorUid="part4"&bootloaderHash="Part3"&infoOnly=N
The 1st part should be 16 characters long.
The 4th part should be 32 characters long.
The 3rd part should be 40 characters long.
So, a good unlock code will look like this. Mine is 19 characters long.
Code:
{"status_code":"0000","status_description":"Successful!","Boot_loader_unlock_code":"7*****************B"}
If it cannot be unlocked. It maybe something like.
Code:
{"status_code":"0020","status_description":"Either there are errors in input data or this device does not have bootloader lock code available yet.","Boot_loader_unlock_code":null}
if you see
Code:
{"status_code":"0003","status_description":"Processor UID cannot be empty!","Boot_loader_unlock_code":null}
the link is not correct, try creating the link again.
Original Post
@jbtumbleson
All I get is
Code:
{"status_code":"0003","status_description":"Processor UID cannot be empty!","Boot_loader_unlock_code":null}[Code][COLOR="Silver"]
[SIZE=1]---------- Post added at 01:52 PM ---------- Previous post was at 01:48 PM ----------[/SIZE]
[/COLOR]Is part 4 correct?
[[[Part 4] here]]
[Code]
https://support.motorola.com/us/en/api/mse/bootLoaderVerifyPhone?serialNo=[/url][[[Part 1 here]]]&secSerialNo =&processorUid=[[[Part 4] here]]&bootloaderHash=[[[Part 3]]]&info Only=N
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
Never mind got it, you have to remove the hashtags "#"
Code:
https://support.motorola.com/us/en/api/mse/bootLoaderVerifyPhone?serialNo="Part1"&secSerialNo=&processorUid="part4"&bootloaderHash="Part3"&infoOnly=N