Does anyone know if the Bionic has a shock sensor? I have dropped the Bionic twice and it has shut off and unable to turn back on. I have to remove the battery each time.
I've dropped my bionic once and didn't have anything happen. I'm not in a hurry to replicate the scenario. my understanding is that shock won't hurt the memory since it is all flash memory. I could be wrong though
Sent from my DROID BIONIC using XDA App
As there are no moving parts except for the 3 outer keys on the DROID Bionic, it does not need a shock sensor. Your phone probably shut off due to the contacts between battery and phone not touching for just long enough, when it bounced off the ground, that it lost power.
Sent from my DB using xda premium
Related
Long story short a week ago my bionic fell into a bathtub filled with water while the device was on.. it was submerged for a good 5 seconds before i was able to get it out but i immediately pulled the battery and dryed the device. I then took all the screws out to loosen the led and dryed the device periodically with a hairdryer. Roughly 12 hours later i reassembled and held my breath.. Bionic vs Water... winner BIONIC!! I know i was extremely lucky so i had to share.. also thanks to everyone who has played a part in further developing this phone without you guys this phone would be the biggest disappointment
Sent from my DROID BIONIC using xda premium
Next time stick it in a bag of rice or bread. The.rice and bread will adsorb the water. Known a few people who have saved their phones that way.
Sent from my DROID BIONIC using XDA App
will do. thanks for the tip
Good afternoon,
I dropped my bionic the other day shattering the glass. I don't have the 100 for insurance so I was looking for a quick way out till I replaced it.
Now, I know I can buy the glass/digitizer online, I even have the how-tos.
This is where my question gets unique. My coworker just out of the blue handed me his broken bionic. It was water damaged a few months ago.
Could I take the glass from this and put it on mine?? Or would it not work because of his damage? Could I rewire my good wires to his glass? I just figured free fix is better than sitting on a broken phone. Just don't know if it will work or not.
Ideas?
Sent from my XT875 using XDA
Well unless water penetrated the display (which, I think, I think, is a fairly well sealed unit) you should be able to use it. If your friend already gave it to you, just try it out
I mean, attempting to power on the unit with a potentially water logged display can't be any riskier than a cracked one imo
Sent from my SGH-I727R using XDA
The display on mine works great, just spiderwebbed glass. I would only really need the glass for it.
I am hoping it works, just don't want to waste (x) hours on my phone to have to turn around and take it apart again haha
Sent from my XT875 using XDA
Ohh ok, well, i'm certainly no expert on phone repair, I do know that the digitizer is a sealed unit, so, unless it stayed under water for a very very long time, I can't personally see why it wouldn't work for you
However, to be on the safe side and avoid wasting hours of your time (cause it does suck wasting time IMO) I'd hold up for a more experienced opinion.
sorry I couldn't be more assertive in my input
Sent from my SGH-I727R using XDA
Replacing the digitizer on the Bionic is incredibly simple, the only thing you need to be cardful with is removing the motherboard - be sure to pry the bottom away from teh LCD (small amount of weak adhesive there), because the digitizer cables (there are 2) run between the LCD and the board, so if you pull the LCD and the board out together, there's a pretty good chance of snapping those cables. Even easier than trying to swap digitizers is to just swap motherboards and LCDs. You might not even need to switch LCDs, but water isn't easy on them, so it's safe to assume that the water damaged one is trashed.
Anyway, all you need is a T4 screwdriver and about 15 minutes. The only other minor difficult area is the earpiece speaker area, but all in all, this is one of the simplest phones I've ever worked on.
Yeah it doesn't seem like a hard phone to work on. Just hope all the water damaged pieces work alright with this phone. I'll post up when I get home with results
Sent from my XT875 using XDA
Just google the ifixit for bionic its only 11 screws and 2 ribbon wires
I know how to do it. That's not what this thread is about. Haha.
The whole reason for this thread was would a digitizer from a water logged phone work as a suitable replacement for my screen.
Sent from my XT875 using XDA
Worked great, new screen is on, all the connections are solid!
Sent from my XT875 using XDA
Congrats
Sent from my SGH-I727R using XDA
Here it is! Just got my Nexus 7 but a really bad surprise waited me. As soon as I opened the box, I experienced the "screen separation" issue that a lot of people had. I tried to look on the web for a real permanent fix as Google's supply are not able to bet me an exchange/RMA that would not require to open the back of the device. I had tried to get the screws tighten without success, I also tried to put spacers in between the screws without success also.. :crying:
I read a lot about fixing this issue; one was explaining how to make the CPU/GPU running and generating heat to get the glue to hold the screen and case together. So I was sitting there watching my battery temp going up to 32-35C/90-95F as my meal was in the oven at 190C/375F. Then I got this great idea. I stopped the stress test, put the tablet in power off state and placed it face down on TOP of the hot spot of the oven; in between the two front elements. I put weigh on top of it and waited about 30-40 min. After that period, I started "Stability Test" available on the Play Store to get the battery temp that was around 47C/115F. I stopped the oven and let it sit for the night face down with weigh on top of it to cool it off. Next morning, surprise! The screen was finally glued. I had no screen seperation since then. It's now being my 5th day without any problem.
Conclusion : FIXED !! :laugh:
Let me know if that worked for you as well !
A heat gun would probably be easier and safer, glad it worked though.
Sent from my Nexus 7 using XDA Premium HD app
Thanks! Worked on mine too!
Sent from my Nexus 7 using xda app-developers app
Interesting idea, hadn't heard that one before. Of course, different stoves will have different hot spots from the oven, so YMMV. How much weight did you put on top of it? Also, do you happen to have a way of measuring how hot the spot gets?
I'd be interested to see if this is a truly permanent solution or if the adhesive starts to break down again after a few weeks or months.
bushpilotwannabe said:
Interesting idea, hadn't heard that one before. Of course, different stoves will have different hot spots from the oven, so YMMV. How much weight did you put on top of it? Also, do you happen to have a way of measuring how hot the spot gets?
I'd be interested to see if this is a truly permanent solution or if the adhesive starts to break down again after a few weeks or months.
Click to expand...
Click to collapse
I placed my hand over and touched it.. If the "hot spot" was couple of degres higher, I wouldn't be able to let my hand sit there.. I was at the limit.. For the weight, I used casino's pot full of change.. 2x 8 pounds..
caublet said:
I placed my hand over and touched it.. If the "hot spot" was couple of degres higher, I wouldn't be able to let my hand sit there.. I was at the limit.. For the weight, I used casino's pot full of change.. 2x 8 pounds..
Click to expand...
Click to collapse
Good to know. Different people seem to have different thresholds for heat (for instance, I remember as a kid I couldn't keep my hands under the same water my mom used to wash dishes), but the spot on my stove doesn't seem to run as hot as you described, so I'd be willing to try it if I run into this issue on my replacement.
All in all, though, I like this idea a lot. There's always a risk, but I'm sure the devices are stress tested with the CPU running at temps hotter than you could reproduce using this method (short of actually putting it inside the oven). As long as you can hold your hand on the spot without it getting too unbearable, I would think it's pretty safe to try.
mario24601 said:
Thanks! Worked on mine too!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
lmao.
Is there any way that we could just use our better glue to stick the screen tight regardless of the heat when playing games?
Sent from my Nexus 7 using xda premium
SoHaunted said:
lmao.
Click to expand...
Click to collapse
Sent from my Nexus 7 using xda app-developers app
abitzsong said:
Is there any way that we could just use our better glue to stick the screen tight regardless of the heat when playing games?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I'm interested in this too. What about a very tiny amount of super glue on top of the old adhesive?
regarding heat-guns .... do you think a hairdryer would get hot enough/ too hot etc? I'm keen to try this but dont want to mess it up.
I'm on my 2nd N7 and have screen lift again
eager27 said:
regarding heat-guns .... do you think a hairdryer would get hot enough/ too hot etc? I'm keen to try this but dont want to mess it up.
I'm on my 2nd N7 and have screen lift again
Click to expand...
Click to collapse
Have you tried the washer trick? That defiantly did the job for me. :good:
I dix tried but had no real results
Sent from my Nexus 7 using xda app-developers app
I dix tired the washer trick with no luck i guess..
Sent from my Nexus 7 using xda app-developers app
This is a confirmed solution
Its not the separation that annoys me... its the creaking sound...
Sent from my Nexus 7 using Tapatalk 2
shocking discovery- missing screws in nexus 7
Long story short:
1st device from best buy : scar like dead pixels, exchanged for second
2nd device from best buy: loose screen/ seperation
Got 3rd device from staples hoping it is better, noticed screen noticeably yellower, minimal seperation problem.
At my last resort, opened up the 2nd and 3rd device, found 3 screws missing from the right side when faced down(or left when screen is up). While the 3rd device is missing one,
. I am so shocked this is happening....no wonder my screen is so loose.
I m a first timer with android device. Own an iphone . Gotta say jelly bean and even the nexus 7 itself is spectacular. But what is with Asus? Have google picked the wrong partner. Or is it is pure poor quality control. Unbelievable.
Follow MW on Twitter for pics to come soon @domlee2010
caublet said:
I stopped the stress test, put the tablet in power off state and placed it face down on TOP of the hot spot of the oven; in between the two front elements.
Click to expand...
Click to collapse
Okay, so just to make sure what you people do:
1. Heat up the oven
2. Find the hotspot
3. Switch oven off, wait until hot to touch (that'd be a bit over 60C)
4. Switch unit off
5. Put the unit on the hot spot with about 16 pounds (8 kilos) of pressure on top (really?)
6. Wait until it has cooled down naturally
Am I missing anything? How has the fix held for you so far after a month or more?
Thanks, :cyclops:
Did not work for me.
I heated the device to 80C with a hairdryer, then pressed it with clamps (force equal to about 9kg) for about 7 hours.
Separation came back about 1 hour after I released the clamps without turning the device on.
Too bad, as I have no way to exchange it.
I guess I'll just use the case.
5 minute epoxy (or any glue one's comfortable with) is the way to go. The problem is obvious once the bevel is removed - the glue on the left side on my device had cured without holding the glass. Hard to believe heating and pressing would work at all.
Sent from my DynaTAC 8000X using magic powers
Background: I owned the Nexus S, and Galaxy Nexus as daily drivers.
This is my first glass backed phone - but not until I finally removed the plastic film from it recently, did I realise how problematic it is.
In short:
DON'T LEAVE THIS PHONE ON ANY SURFACE NOT PERFECTLY LEVEL.
I mean, the slightest incline and your phone will slowly make it's way to jumping off the edge.
I had never dropped my phone in the few months since release, and the week I take off the plastic, it has hit the floor 3 times.
Once it did it over the course of a few hours in the middle of the night, from the flat night table next to the bed.
The other day, off a counter ledge in the bathroom.
Just now, from atop the microwave in the kitchen.
Each time, nothing was moving or near the phone, and it fell off seconds or minutes after putting it down. No vibration or anything occured either, which would surely expedite the falling.
If you put this phone down on a not-level surface (ie, anything that would cause a ball to roll) you can watch it ever so gradually slide and move around. I can't even put it on a short stack of 6 pieces of paper on my desk without it slipping off before long. I'm telling you these are surfaces that you wouldn't know weren't level if not for this phone treating it like an ice skating rink. Nothing has ever fallen off of them, previously.
I hate it. I wouldn't change the phone to another, but still. Frictionless glass backing SUCKS.
Oh, and luckily no cracks or damage. So far. But I've learned my lesson and now have to wall it in with other objects it can't move past.
Now i know
Sent from my Nexus 4 using xda app-developers app
I'm sorry but... IBL.
Sent from my Nexus 4 using xda premium
Get a screen protector for the back or a nice case
Sent from my Nexus 4 using XDA Premium HD app
EnIXmA said:
Get a screen protector for the back or a nice case
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
Whilst I recommend a case for pretty much everyone else I know, I'm careful enough to go "naked" and appreciate the phone as designed. It's just an adjustment in this case, and I don't anticipate it falling ever again.
A stupid adjustment I shouldn't have to make, but there you go.
Your physics concepts are fu**ed up,if there is no friction,the phone would be slipping away from your hands every seconds already,go back to school to study man. In your situation,it is called lesser friction.
Sent from my HTC Wildfire S A510e using xda premium
In other news, walking on gravel without shoes hurts and standing outside when it's snowing will make you cold.
Yes, it's got a shiny back and yes, funnily this makes it more likely to slide off things.
If it bothers you, get a bumper. I did and it doesn't slide around now. I also bought shoes for the snow and that fixed my feet too.
Sent from my Nexus 4 using Tapatalk 2
davidang said:
Your physics concepts are fu**ed up,if there is no friction,the phone would be slipping away from your hands every seconds already,go back to school to study man. In your situation,it is called lesser friction.
Sent from my HTC Wildfire S A510e using xda premium
Click to expand...
Click to collapse
Hahaha yeah my physics are just so CRAZY. It couldn't merely be my writing, you know: using a word that conveys the relative amount of friction, rather than scientifically correct terminology. Get over yourself.
And whilst we're at it, unless you were somehow holding the phone only by its "frictionless" back, it wouldn't slip out of your hands, now would it? Oh, the irony of your terrible post.
d_phekt said:
I'm sorry but... IBL.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
New moderator?
We had plenty of rant threads, no need to open another one.
So yes, thread locked.
Spilled some kind of liquid on my phone during new years (Beer, water, who knows). Phone was off the next day and speaker blown. No other signs of damage. It was in my otter box commuter case so don't know how much actually got in.
When I first got the phone the speaker sometimes sounded partially blown and other times fine. Now its full on crackly and hard to hear. Not sure if its from water damage or just finally blew. I got a replacement from Verizon but before I return the old one, I wanted to be sure the liquid damage pad hasn't gone off and they charge me $500. Anyone know where its at on the Turbo?
Sent from my XT1254 using XDA Free mobile app
Found them in this teardown video:
Motorola Droid Turbo XT1254 Disassembly / Tear Do…: http://youtu.be/l_AOQ6U2Zb0
There's two, one next to the headphone jack at the top right of the phone and one inside the bottom left of the phone. Neither is visible without taking the back cover off
Sent from my XT1254 using XDA Free mobile app