I have been trying to get the get-a-robot-vpnc (http://code.google.com/p/get-a-robot-vpnc/) package to work on my HTC Vogue for some time. I am currently running the eclair 2.1 mssmision build.
I have gotten pretty far I think.. but need some help. Here are the steps that I have followed up until now.
1. Compile tun.ko module for Vogue
I followed these instructions to get the vogue kernel locally: http://www.androidonhtc.com/get_involved
After step 5 in that list, make sure to select the "Device Drivers->Network Device Support->Universal TUN/TAP device driver support" (select as M for kernel module)
After step 6, build the kernel modules: "make modules ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-"
2. Put tun.ko onto the vogue permanently
Set the /system partition writable
Code:
adb -d shell
#su
#mount -o remount,rw /system
In a different terminal, push the tun.ko over to the /system/lib/modules dir
Code:
adb -d push ~/android-kernel/kernel/drivers/net/tun.ko /system/lib/modules
Back in the first terminal, set the system volume to read only again.
Code:
#mount -o remount,ro /system
3. Install the latest get-a-robot-vpnc package
Download from website and push to device:
Code:
adb -d install VPN_Connections_v097.apk
It is installed to /data/data/org.codeandroid.vpnc_frontend directory.
I put in the correct settings to connect to my companies vpn. (These same settings work perfectly on my ubuntu machine)
When I run the program I see on logcat:
Code:
D/VPN_Connections( 658): Password is numeric
D/VPN_Connections( 658): password **********
D/VPN_Connections( 658): done interacting with vpnc
D/VPN_Connections( 658): process stderr:
D/VPN_Connections( 658):
D/VPN_Connections( 658): Attempt to read vpnc process id did not return anything
D/VPN_Connections( 658): process had died, return as failed connection
But when i shell into the phone I see the process running:
Code:
/ # ps | grep vpnc
658 10049 107m S org.codeandroid.vpnc_frontend
710 0 1300 S /data/data/org.codeandroid.vpnc_frontend/files/vpnc -
At this point the network is hosed and in order to get it back I have to reboot.
Trying it manually
In order to see what is happening with vpnc, I shell into the phone and run the program manually.
First I need to ensure the tun.ko is loaded:
Code:
#su
#insmod /system/lib/modules/tun.ko
You can see the command string for vpnc in the /data/data/org.codeandroid.vpnc_frontend/files/lastConnection.txt file.
I run this command:
Code:
/data/data/org.codeandroid.vpnc_frontend/files/vpnc --script /data/data/org.codeandroid.vpnc_frontend/files/vpnc-script --no-detach --debug 1
Enter the correct vpn data and see this output: (i cut out my company specific info and ip addresses)
Code:
vpnc version ERSION
IKE SA selected psk+xauth-3des-md5
NAT status: NAT-T VID seen, no NAT device detected
IKE SA selected psk+xauth-3des-md5
NAT status: NAT-T VID seen, no NAT device detected
Enter Username and Password.
Banner: Welcome <cut> Remote Access User.
got address <xxx.xxx.xxx.xxx>
Connect Banner:
| Welcome <cut> Remote Access User.
backing up dns and resolve.conf
vpnc-script ran to completion
IPSEC SA selected aes128-sha1
VPNC started in foreground...
vpnc[582]: can't open pidfile /var/run/vpnc/pid for writing
At this point I seem to be connected.. but can't actually ping anything on my company network, or get to any websites.
I am not very strong with networking.. so I feel that maybe the routes are not being setup properly.. but I don't know:
Here is my routing table after the connection (took out company ip)
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
68.28.145.85 * 255.255.255.255 UH 0 0 0 ppp0
xxx.xxx.xxx.xx 68.28.145.85 255.255.255.255 UGH 0 0 0 ppp0
default * 0.0.0.0 U 0 0 0 tun0
Any help would be appreciated.
Hey - I posted a response in the vpnc thread:
http://forum.xda-developers.com/showpost.php?p=5625056&postcount=109
Also, to amend - if you try it manually again, try this:
/data/data/org.codeandroid.vpnc_frontend/files/vpnc --script /data/data/org.codeandroid.vpnc_frontend/files/vpnc-script --no-detach --natt-mode cisco-udp --debug 1
I just tested Privacy Extensions successfully under Virtuous 3.2.0 using the following command:
sysctl -w net.ipv6.conf.default.use_tempaddr=2
However I'd like to make the change permanent. Would it be better to create /etc/sysctl.conf which currently does not exist on my device, or add it to the /sys/module/ipv6/parameters directory? I tried the later, but was unable to create the file. Any ideas?
# pwd
/sys/module/ipv6/parameters
# echo 2 > use_tempaddr
cannot create use_tempaddr: directory nonexistent
code.google.com/p/android/issues/detail?id=14013
I'm on a Galaxy S but it doesn't matter.
I used the command from there https://bugs.launchpad.net/ubuntu/+source/procps/+bug/176125
on adb:" echo 2 >/proc/sys/net/ipv6/conf/all/use_tempaddr" but i get the erro:
"cannot create /proc/sys/net/ipv6/conf/all/use_tempaddr: directory nonexistent"
I made a textfile in windows and named it "use_tempaddr" and wrote "2" in the textfile. Removed the *.txt extension and copied it to /mnt/sdcard on my GalaxyS.
Then I made "busybox cp /mnt/sdcard/use_tempaddr /proc/sys/net/ipv6/conf/all/use_tempaddr" but I get the error: "cp: can't create '/proc/sys/net/ipv6/conf/all/use_tempaddr': No such file or directory"
Pls, help me how to get that file working.
You could use a sysctl.conf in /system/etc, just follow the steps here:
http://forum.xda-developers.com/showthread.php?t=814463
Very simple
failed to copy 'sysctl.conf' to '/system/etc/sysctl.conf': Permission denied
Why?
Can I do "adb shell" instead, then "su" to have access? But what is the command from inside adb shell instead of adb push?
EDIT: I pushed it to /mnt/sdcard but I can't copy it to /system/etc with Astro, the paste option is grayed out
EDIT2: Ok it worked. I downloaded "super manager" from the android market, and activated the root (rights) function of super manager.
Edit3: But going to for example http://test-ipv6.com on my Android device does show the MAC in the ipv6 address. So it didn't work
EDIT4: Another thing is, the Android Browser of Android 2.2 seems to only support ipv4
Polarfuchs said:
failed to copy 'sysctl.conf' to '/system/etc/sysctl.conf': Permission denied
Why?
Can I do "adb shell" instead, then "su" to have access? But what is the command from inside adb shell instead of adb push?
EDIT: I pushed it to /mnt/sdcard but I can't copy it to /system/etc with Astro, the paste option is grayed out
EDIT2: Ok it worked. I downloaded "super manager" from the android market, and activated the root (rights) function of super manager.
Edit3: But going to for example http://test-ipv6.com on my Android device does show the MAC in the ipv6 address. So it didn't work
Click to expand...
Click to collapse
You need root to modify the system partition.
Did you "sysctl -p" after the transfer? If not, open a terminal on your phone (or adb, whichever you prefer), and type that. The command should output the contents of your sysctl.conf
If that is successful, reboot, then try the website again.
If I enter sysctl -p it says sysctl:not found
if I enter sysctl.conf -p it says sysctl.conf: not found
But when I cd to /system/etc and do "ls" i can see the sysctl.conf file is present.
btw: I'm rooted.
Polarfuchs said:
If I enter sysctl -p it says sysctl:not found
if I enter sysctl.conf -p it says sysctl.conf: not found
But when I cd to /system/etc and do "ls" i can see the sysctl.conf file is present.
btw: I'm rooted.
Click to expand...
Click to collapse
Try:
Code:
busybox sysctl -p
Usually the update-script used to install roms will symlink this for you, but in this case, it's just one extra word lol.
Code:
$ export PATH=/data/local/bin:$PATH
$su
# busybox sysctl -p
sysctl: error: 'net.ipv6.conf.all.use_tempaddr' is an unknown key
#
hm.....
That's the extent of my knowledge sorry to say. Not too familiar with all of this
I hope someone can solve your issue!
Just for a sanity check, you could try looking at what is allowable in the context of your dinc: // I only looked at eth0, you can look at whatever you like using enough terms to get you into the neighborhood.
(from adb)
bash-3.2# sysctl -A | grep "net.ipv6.conf.eth0."
sysctl -A | grep "net.ipv6.conf.eth0."
sysctl: error reading key 'net.ipv4.route.flush': Permission denied
net.ipv6.conf.eth0.forwarding = 0
net.ipv6.conf.eth0.hop_limit = 64
net.ipv6.conf.eth0.mtu = 1500
net.ipv6.conf.eth0.accept_ra = 1
net.ipv6.conf.eth0.accept_redirects = 1
net.ipv6.conf.eth0.autoconf = 1
net.ipv6.conf.eth0.dad_transmits = 1
net.ipv6.conf.eth0.router_solicitations = 3
net.ipv6.conf.eth0.router_solicitation_interval = 4
net.ipv6.conf.eth0.router_solicitation_delay = 1
net.ipv6.conf.eth0.force_mld_version = 0
net.ipv6.conf.eth0.use_tempaddr = 0
net.ipv6.conf.eth0.temp_valid_lft = 604800
net.ipv6.conf.eth0.temp_prefered_lft = 86400
net.ipv6.conf.eth0.regen_max_retry = 5
net.ipv6.conf.eth0.max_desync_factor = 600
net.ipv6.conf.eth0.max_addresses = 16
net.ipv6.conf.eth0.accept_ra_defrtr = 1
net.ipv6.conf.eth0.accept_ra_pinfo = 1
net.ipv6.conf.eth0.accept_ra_rtr_pref = 1
net.ipv6.conf.eth0.router_probe_interval = 60
net.ipv6.conf.eth0.proxy_ndp = 0
net.ipv6.conf.eth0.accept_source_route = 0
net.ipv6.conf.eth0.optimistic_dad = 0
net.ipv6.conf.eth0.disable_ipv6 = 0
net.ipv6.conf.eth0.accept_dad = 1
sysctl: error reading key 'net.ipv6.route.flush': Permission denied
bash-3.2#
So, maybe this line is of interest::
net.ipv6.conf.eth0.use_tempaddr = 0
-- I could echo 1 into the /proc FS spot you were trying to, as well as setting tempaddr=2. I am just guessing that some of the kernels aren't using built in ipv6, so maybe you've got to load the module? "modprobe ipv6"?
I'm also guessing you've tested something easy like "# ping6 -c 4 ::1" just to be sure ipv6 is alive at all.
Just some thoughts - Hashi
ping6 does show that:
Code:
$ export PATH=/data/local/bin:$PATH
$su
# ping6 -c 4 ::1
ping6: not found
# busybox ping6 -c 4 ::1
PING ::1 (::1): 56 data bytes
64 bytes from ::1: seq=0 ttl=64 time=0.191 ms
64 bytes from ::1: seq=1 ttl=64 time=0.924 ms
64 bytes from ::1: seq=2 ttl=64 time=0.968 ms
64 bytes from ::1: seq=3 ttl=64 time=0.198 ms
--- ::1 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.191/0.570/0.968 ms
#
grep doesn't exist on the phone:
Code:
export PATH=/data/local/bin:$PATH
$ $su
# busybox sysctl -a | grep "net.ipv6.conf"
grep: not found
sysctl: error reading key 'net.ipv4.route.flush': Permission denied
sysctl: error reading key 'net.ipv6.route.flush': Permission denied
#
And modprobe ipv6 gives:
Code:
export PATH=/system/xbin:$PATH
$ $busybox modprobe ipv6
modprobe: chdir(2.6.32.9): No such file or directory
$
EDIT: "lsmod" doesn't show ipv6
and "insmod ipv6" says "can't open 'ipv6'"
Just a couple things since I've got to run now:
1) No grep on phone: I think it's just another bit of busybox. If you type in busybox and <enter>, then you should see a huge list of verbs / cmds, and you can use "busybox" <verb> (or for grep busybox grep) instead of grep.
2) modprobe ipv6 fails:: I hadn't really studied android much yet, so now I see that ipv6 is most often compiled into the kernel, not a module, so my mistake. It is unlikely to be module except on some early kernel or if someone really wanted it to be.
3) ping6 ::1 returns, is a good, but very embryonic good sign.
4) What are you after? Stateless configuration (DHCP for IPv6 only unique?). Have you had IPv6 working after any fashion (say with a "2001::xxxx:yyyy::z" homebrewed unique address working at all yet? Another thing: Are you behind some IPv6 unfriendly firewall or are you using 3g? If you're on wifi and say, behind an ATT UVerse setup, you are going to have use 6to4 tunnel to get anywhere. (hey, what's another 30 ms? )
--- I'm an IPv6 fan, but only really know configuring it on Cisco routers and true linux boxes thus far. -----
If you're in what maybe is the best of worlds on wifi over a dd-wrt setup, then try to configure an IPv6 tunnel on the firewall on the Outside and see if you can hit that with IPv6. Gotta start somewhere.
Hashi
I use a AVM Fritzbox 7240 with freetz image.
My ISP doesn't use IPv6 yet but the fritzbox router automatically negotiates if 6to4 is necessary. And because my ISP still has no ipv6 the router uses 6to4.
Another setting in the router config is, that the router addresses 'unique local addresses' to the network device as far as no ipv6 connection is present.
That setting can be changed too.
I'm not a professional network administrator, but I wanted to test ipv6 for the router. And I want to use the privacy extensions on android, because without them the MAC is shown on for example www.test-ipv6.com. Ipv6 does work on android but without privacy extensions at default.
Ah yes, I connect my android device via wifi to the router.
So, if ipv6 is built into the kernel, is there a via to set the use_tempaddr setting? Maybe via a file like rc.custom or how these files are called that load things at boot up.
Polarfuchs said:
I use a AVM Fritzbox 7240 with freetz image.
My ISP doesn't use IPv6 yet but the fritzbox router automatically negotiates if 6to4 is necessary. And because my ISP still has no ipv6 the router uses 6to4.
Another setting in the router config is, that the router addresses 'unique local addresses' to the network device as far as no ipv6 connection is present.
That setting can be changed too.
I'm not a professional network administrator, but I wanted to test ipv6 for the router. And I want to use the privacy extensions on android, because without them the MAC is shown on for example www.test-ipv6.com. Ipv6 does work on android but without privacy extensions at default.
Ah yes, I connect my android device via wifi to the router.
So, if ipv6 is built into the kernel, is there a via to set the use_tempaddr setting? Maybe via a file like rc.custom or how these files are called that load things at boot up.
Click to expand...
Click to collapse
OK: It sounds like you made a lot more progress than me on the droid if you got it working with any outside site with IPv6. One thing I notice is that although it "appears" I can set use_tempaddr, I then realized that no matter what I type in, it is usually echoed back to me on the command line, so that I have no idea if it was really set. I'm too new to the Dinc to know what it'll do and won't re ipv6.
It turns out I wasn't setting it using sysctl, but I was able to echo 2 > /proc/*/.../use_tempaddr, and that would show up in a 'cat /proc/*' statement. I don't think it actually is working on my ROM or that I haven't yet figured out how to transform the linux statements I'm comfortable with into the watered down droid busybox equivalents. I'm really not seeing much indication other than a few little hopeful things, that ipv6 is fully enough supported on my rev of software to get anywhere.
However, now I'm pretty interested in this and will be working on an ipv6 setup (just got an actual /48 block at work) so will be keeping this in mind.
I'm curious now to know what series of statements you used to get far enough to hit www.test-ipv6.com with ping6? (or did I get that wrong?)
There is a bug filed in the google codebase that implies that ipv6 just isn't working yet, but it looks fairly old. It may be pre-2.2. It is an enhancement request that is still alive and asking for ipv6 support in android, so I'm really interested in what you did before to get it working.
By the way, my results from test-ipv6.com are pretty bleak. 10/10 for ipv4 and 0/14 (I'm forgetting the exact numbers). That was after a lot of setup and attempting to do this the way I'd do a linux box. I do believe it's in the kernel, and sysctl -a seems to bear that out.
I did manage to figure out how to make a dinc kernel tonight, so I can get a better look now at the ipv6.c code and make sure it's in the config. This little linux box is really confusing me right now
Thanks -- Hashi
I didn't do much.
I have android 2.2 which already supports ipv6 but no privacy extensions.
ipv6 worked from the start.
Ipv6 does show me a 7/10 on my win7 pc.
But with my galaxy S android device it shows 0 or 2 (I don't remember)
I think the installed browser of android 2.2 doesn't support ipv6 yet.
I have made screenshots to compare ipv6 on win7 and on the android device via wifi.
Do you think the results for my android device on test.ipv6.com appear like that, because the browser doesn't show ipv6 sites, or do the results mean that I have an ipv6 address through 6to4 but my android device doesn't accept ipv6 yet?
Polarfuchs said:
I didn't do much.
I have android 2.2 which already supports ipv6 but no privacy extensions.
ipv6 worked from the start.
Ipv6 does show me a 7/10 on my win7 pc.
But with my galaxy S android device it shows 0 or 2 (I don't remember)
I think the installed browser of android 2.2 doesn't support ipv6 yet.
I have made screenshots to compare ipv6 on win7 and on the android device via wifi.
Do you think the results for my android device on test.ipv6.com appear like that, because the browser doesn't show ipv6 sites, or do the results mean that I have an ipv6 address through 6to4 but my android device doesn't accept ipv6 yet?
Click to expand...
Click to collapse
I'll look around for the write-up(s) I found over the last day or two about various androids and ipv6, and they'll perhaps answer some of your questions, like the browser. This is the gist of what I got from reading.
Some 2.2+ androids support (marginally) the ipv6 stack, tunneled AND dual-stack. A couple people can get 'outside' using ipv6, and a couple more can 'browse' ipv6-only websites. The browser isn't the problem. At some low level on my Incredible, the stack doesn't "see" ipv6 addresses as "valid". I think that means it just has some holes left in it. You've got a 'newer' device (Samsung), so this may have been improved.
My scores are 10/10, ipv4, and 0/24? ipv6, and from a 0 score there's nothing it can tell you of use. It just doesn't work. Yours looks very promising.
One thing I'm wondering about is whether I've got a version of busybox that is sadly lacking in ipv6 functionality. All the network applets come out of that single executable. I've got busybox 1.16.0, and am curious which you've got. I could change busybox's version easily, in fact you can go to busybox.net, get source, fix it up, use toolchains and build it.
Also, life is easier if you just install it (./busybox --install .) since it'll make a symlink for each function in whatever folder it was in (like /system/xbin is pretty empty and on my path).
Let us know when you get it running. I'll do the same. Another thing missing in mine is ipv6 DNS. I have ipv6 DNS setup at work, and if I point it to that DNS server using "setprop x.y.sit1.DNS.*" (sorry, don't recall the exact setup procedure), than it still will not resolve ipv6 addresses. Nslookup (type=AAAA) doesn't work correctly either. Mine is heavily hacked stock 2.2 with a custom kernel. I just blew all the 'sense' layer away for the sake of battery life.
-- H
I use a cooked rom, not the official samsung 2.2
It has had busybox 1.16 installed.
But I went to the market and installed the app "BusyBox Installer" which then installed BusyBox 1.17.1 for me.
Sorry for not subscribing to my own thread, I had this problem licked back in January....at least on my Droid Inc. The problem is that /system is mounted as read-only. You need to remount with RW permissions and then copy or vi sysctl.conf to /system/etc/
skyblaster said:
Sorry for not subscribing to my own thread, I had this problem licked back in January....at least on my Droid Inc. The problem is that /system is mounted as read-only. You need to remount with RW permissions and then copy or vi sysctl.conf to /system/etc/
Click to expand...
Click to collapse
Thanks for checking back. I'd still like to get this working on my own Inc. The case I'm most interested in is probably using 3g rather than wifi. Do you have an idea whether the Verizon 3g supports ipv6? I know we should be able to get it working in , for example, a dd-wrt flashed router, but it would be nice to be able to use ipv6 when there's no handy wifi.
Thanks - Hashi
Thx for the feedback.
I remounted system rw (can be done easily with "SGS Toolbox", or manually)
Ifconfig shows as long as wifi is turned on, there is an interface called eth0.
I added to the sysctl.conf this: "net.ipv6.conf.eth0.use_tempaddr=2"
I rebooted and ifconfig shows an ipv4 and ipv6 address.
But www.test-ipv6.com shows 0/10 at the ipv6 rating.
EDIT: Does /system have to be kept rw or can I change it to Read-only after placing the sysctl.conf?
I have found that you can enable www access through a proxy server by inserting new iptables rules in Android. I have used it successfully to browse internet throughput the wifi at my office, it should be the same for school networks with proxy servers as well.
Requirements:
Root access
Kernel with iptable and netfilter support
Known working kernels:
Doomkernel v10
Have been tested on .368 firmware and Doomkernel v10, all iptable and netfilter modules are included in his kernel.
1. Open a terminal emulator or use a scripting app, I have been using ScriptManager.
2. Add iptables entry, root access is needed to manipulate the iptables.
Replace ip address and port in the --to parameter to match your own proxy server address
$ su
# iptables -t nat -A OUTPUT -p tcp -o wlan0 -d internal.ericsson.com -j ACCEPT
# iptables -t nat -A OUTPUT -p tcp -o wlan0 --dport 80 -j DNAT --to 153.140.40.150:3132
# iptables -t nat -L (to list newly added rule)
All apps will now connect to the proxy when accessing port 80
To remove iptables:
$ su
# iptables -t nat -F OUTPUT
You might see several error messages, they can be ignored
modprobe: module 'ip_tables' not found
getsocket for multiport failed strangely: No such file or directory
FIX ME! implement getprotobyname() bionic/libc/bionic/stubs.c:378
Please let me know if you know how to improve the ruleset and if other kernels are working as well.
Updated ruleset:
Have added additional rule to configure iptales to bypass proxy for intranet web addresses, it would otherwise try to open up intranet web pages trough the proxy server.
The easy way
http://forum.xda-developers.com/showthread.php?t=766569
w1000i said:
The easy way
http://forum.xda-developers.com/showthread.php?t=766569
Click to expand...
Click to collapse
Thanks for the url, have you tried it? Might give it a try but is sounds like it is just a frontend to manipulating the iptables, I prefer to change it myselft, that gives full flexibility to do whatever I wish with the iptables
Did give DroidProxy a try from the android marked but it did not seem to work which is why I started to setup the proxy manually in iptables.
---------- Post added at 10:08 AM ---------- Previous post was at 09:43 AM ----------
w1000i said:
The easy way
http://forum.xda-developers.com/showthread.php?t=766569
Click to expand...
Click to collapse
Found out that, the transporxy project has been discontinued and replaced with autoproxy which according to the forum members should work very well.
http://forum.xda-developers.com/showthread.php?t=1083284
It should work as long as multiports are not used as this is not included in Doomkernel v10. This only mean that you will have to add a seperate rule for each port you wish to forward ie. one for port 80 and one for port 443 instead of having both included in the same rule.
I wanted to enable SCP and SSH using DropBear II ... for some reason DropBear Server II doesn't install scp & ssh binaries, you can get them from github and symlink it into system. Here's what I did...
DropBear archive (1M): https://www.dropbox.com/s/h2guipuvdltiden/dropbearii.zip
Feel free to mirror that if you want.
These directions allow you to ssh into the system as root, be very careful. I recommend not leaving the service running if you are not using it.
I take no responsibility if you brick your unit while mucking around as root.
Back Up
Download dropbearii.zip and unzip on your local file system.
From your local filesystem install the APK and push scp & ssh to tmp.
Code:
adb install DropBearServer2.1.apk
adb push scp /data/local/tmp/scp
adb push ssh /data/local/tmp/ssh
From the OUYA GUI install the DropBearServerII service... Select Make -> Software -> DropBearServer II -> Install
Shell into your OUYA and make /system writable.
Code:
adb shell
su
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
Move scp & ssh into DropBear II directory
Code:
mv /data/local/tmp/scp /data/data/me.shkschneider.dropbearserver2/app_data/
mv /data/local/tmp/ssh /data/data/me.shkschneider.dropbearserver2/app_data/
Change the permissions
Code:
chmod 6555 /data/data/me.shkschneider.dropbearserver2/app_data/scp
chmod 6555 /data/data/me.shkschneider.dropbearserver2/app_data/ssh
Create the symlinks
Code:
cd /system/bin/
ln -s /data/data/me.shkschneider.dropbearserver2/app_data/scp ./scp
ln -s /data/data/me.shkschneider.dropbearserver2/app_data/ssh ./ssh
Change /system back to read-only (optional) and exit.
Code:
mount -o ro,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
exit
exit
Reboot the OUYA (optional)
Code:
adb reboot
Notes/testing
Windows users can use Putty to ssh & scp get them here.
To ssh into the system:
Code:
ssh [email protected]_ADDRESS
To scp a file to the sdcard:
Code:
scp ./some_file [email protected]_ADDRESS:/sdcard/
To get to settings push the U circle button one time.
If you turn on "Start on boot" in the settings menu and reboot, the service will be turned off. Though it will be left on in the standard standby mode.
I recommend using pubkey rather than password. Basically generate a public key and push it into /sdcard/ then install it from the DropBear II app.
Unix Hosts can do:
Code:
ssh-keygen -t rsa
Windows using PuttySSH follow these directions, I haven't tested them though.
If you don't want to be bothered with pubkey, please change the default password it is set to 42.
If you already know about pubkey, you can cat them into: /data/data/me.shkschneider.dropbearserver2/app_data/authorized_keys
Unchecking "Allow Password" doesn't work properly.
Why would I want to do this? I didn't really like the Wireless ADB disappearing after the OTA upgrade, this may be less annoying if the next OTA doesn't nuke it.
I'm getting an error that busybox is not installed when trying to start the service. Is there anything special you had to do with busybox to get this to run? I installed it via the apk.
Edit: Nevermind. I didn't realize the busybox apk was an installer and I didn't find the icon when I looked. Just checked again and found the busybox installer icon and did a smart install. Dropbear ssh is running now.
I ran it manually with
Code:
dropbear -E -s -P /data/dropbear/dropbear.pid -r /data/dropbear/dropbear_rsa_host_key -d /data/dropbear/dropbear_dss_host_key
and it looks ok when idling but when connection it gives me
Aiee, segfault! You should probably report this as a bug to the developer
Click to expand...
Click to collapse
This could be CM10.1 environment issues (libc). The built-in SSHd doesn't work properly as well. Some binaries give strange errors when executed with SSHd (like sqlite3).
I can't install the DropBearServer II from the Make option, comes up with "operation failed". Tried to make the system rw to see if that might have been the problem but still no luck. Anyone else had that problem?
andlid said:
I can't install the DropBearServer II from the Make option, comes up with "operation failed". Tried to make the system rw to see if that might have been the problem but still no luck. Anyone else had that problem?
Click to expand...
Click to collapse
I installed it via adb.
For others I was able to install using IncognitoMan's -=StockPlus=- ROM -- http://forum.xda-developers.com/showthread.php?t=2347214
You may need busybox installed, I'm not 100% sure, I haven't tried without busybox.
SSH command line on android
The link is broken
Could someone please reupload this? would be awesome
Thank you so much
BIade said:
Could someone please reupload this? would be awesome
Thank you so much
Click to expand...
Click to collapse
bump - upload again please
You can also get static binaries from dropbear or ssh server apks in playstore by simply unpacking the apk.