Database Develop

update 0.2% une solution c'est urgent

salut j'ai une hp ipaq hw6515b en anglais j'ai voulu le met en français mais il sur 0.2% il ne bouge plus il y a une solution pour sa c'est urgent
le hp ne s'allume plus il reste sur SERIAL V0.21
cordialement

17:18:12:593 [msg] : Client_Logging() !
17:18:12:593 [msg] : =============================================
17:18:12:593 [msg] : START Client_Initialize() !
17:18:12:593 [msg] : Call CheckActiveSyncVersion() !
17:18:12:593 [msg] : Call CheckCEMode() !
17:18:15:875 [msg] : Currecnt Not in CE Mode or in CE Mode but ActiveSync Not Connected.
17:18:15:875 [msg] : Call DisconnectActiveSync() !
17:18:19:984 [msg] : Start Get Connect Port !
17:18:20:218 [msg] : Currecnt in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
17:18:20:234 [msg] : Device CE Start Address : [80000000].
17:18:20:234 [msg] : Device Radio Start Address : [0].
17:18:20:234 [msg] : END Client_Initialize() !
17:18:20:234 [msg] : =============================================
17:18:20:234 [msg] : START Client_FlashRadioOS() ! FileName : [RADIOOS.nbf] ; HeaderLen : [1260].
17:18:20:250 [msg] : END Client_FlashRadioOS() !
17:18:20:250 [msg] : =============================================
17:18:39:078 [err] : Check Radio Status Error.

donado said:
17:18:12:593 [msg] : Client_Logging() !
17:18:12:593 [msg] : =============================================
17:18:12:593 [msg] : START Client_Initialize() !
17:18:12:593 [msg] : Call CheckActiveSyncVersion() !
17:18:12:593 [msg] : Call CheckCEMode() !
17:18:15:875 [msg] : Currecnt Not in CE Mode or in CE Mode but ActiveSync Not Connected.
17:18:15:875 [msg] : Call DisconnectActiveSync() !
17:18:19:984 [msg] : Start Get Connect Port !
17:18:20:218 [msg] : Currecnt in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
17:18:20:234 [msg] : Device CE Start Address : [80000000].
17:18:20:234 [msg] : Device Radio Start Address : [0].
17:18:20:234 [msg] : END Client_Initialize() !
17:18:20:234 [msg] : =============================================
17:18:20:234 [msg] : START Client_FlashRadioOS() ! FileName : [RADIOOS.nbf] ; HeaderLen : [1260].
17:18:20:250 [msg] : END Client_FlashRadioOS() !
17:18:20:250 [msg] : =============================================
17:18:39:078 [err] : Check Radio Status Error.
Click to expand...
Click to collapse
yes, it failed to update. just add me on yahoo messenger :cata_cata_cs

[Q]Remuxed mkv w/o converting unable to play

This is weird, this is the original file:
General
Complete name : E:\Animation\Anime\Watched\Code Geass\R1\[OZC-EZ8] Code Geass - Ep.02 'The White Knight Awakens' [720p_v3].mkv
Format : Matroska
File size : 351 MiB
Duration : 24mn 10s
Overall bit rate : 2 032 Kbps
Encoded date : UTC 2009-08-31 23:45:18
Writing application : mkvmerge v2.7.0 ('Do It Again') built on Apr 15 2009 00:27:10
Writing library : libebml v0.7.7 + libmatroska v0.8.1
Cover : Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes / Yes
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Muxing mode : Container [email protected]
Codec ID : V_MPEG4/ISO/AVC
Duration : 24mn 10s
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 66 r1114M a933a3e
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy_rd=1.0:0.0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=3 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=crf / crf=22.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / vbv_maxrate=25000 / vbv_bufsize=25000 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00
Audio #1
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : A_AAC
Duration : 24mn 10s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Title : English 2ch AAC
Language : English
Audio #2
ID : 3
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : A_AAC
Duration : 24mn 10s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Title : Japanese 2ch AAC
Language : Japanese
Text #1
ID : 4
Format : ASS
Codec ID : S_TEXT/ASS
Codec ID/Info : Advanced Sub Station Alpha
Title : English OP/ED + Signs/Titles
Language : English
Text #2
ID : 5
Format : ASS
Codec ID : S_TEXT/ASS
Codec ID/Info : Advanced Sub Station Alpha
Title : English Subtitles
Language : English
Menu
00:00:00.000 : enrologue
00:00:33.033 : en:Opening Credits
00:02:03.123 : enart 1
00:13:46.826 : enart 2
00:22:17.336 : en:Ending Credits
00:23:47.426 : en:Next Episode Preview
After, remuxing and 'getting rid' of the english audio track to get the below, it is unable to play! Any ideas?
General
Complete name : E:\Animation\Anime\Watched\Code Geass\R1\[OZC-EZ8] Code Geass - Ep.02 'The White Knight Awakens' [720p_v3] (1).mkv
Format : Matroska
File size : 325 MiB
Duration : 24mn 10s
Overall bit rate : 1 881 Kbps
Encoded date : UTC 2010-11-23 03:03:12
Writing application : mkvmerge v4.2.0 ('No Talking') built on Jul 28 2010 18:38:23
Writing library : libebml v1.0.0 + libmatroska v1.0.0
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Muxing mode : Container [email protected]
Codec ID : V_MPEG4/ISO/AVC
Duration : 24mn 10s
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 66 r1114M a933a3e
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy_rd=1.0:0.0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=3 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=crf / crf=22.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / vbv_maxrate=25000 / vbv_bufsize=25000 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : A_AAC
Duration : 24mn 10s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Title : Japanese 2ch AAC
Language : Japanese
Text #1
ID : 3
Format : ASS
Codec ID : S_TEXT/ASS
Codec ID/Info : Advanced Sub Station Alpha
Title : English OP/ED + Signs/Titles
Text #2
ID : 4
Format : ASS
Codec ID : S_TEXT/ASS
Codec ID/Info : Advanced Sub Station Alpha
Title : English Subtitles
Menu
00:00:00.000 : enrologue
00:00:33.033 : en:Opening Credits
00:02:03.123 : enart 1
00:13:46.826 : enart 2
00:22:17.336 : en:Ending Credits
00:23:47.426 : en:Next Episode Preview

Problem solved:
Under extra options for each video/audio track for mkvmerge gui, compression must be manually set to none.

[Q] New O2x recommendations

I just bought my wife new O2x.Have a question regarding which rom,stock or something else to use.Phone has 2.3.4 v20l instaled and rooted,is there any new stock firmware version or do you recommend to use some custom rom?I just want to have god working and stable rom.Thanks for any help.

I recommend the latest stock rom V20q (see my rebuild) and a Horsepower or GuestekrnL.

Where can i find v20q kdz and is it update procedure same as o3d?

Here's the link to V20q kdz:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP990/ANEUDW/V20q_00/V20Q_00.kdz
Flash procedure should be the same as O3D. First, install the virtual server and then follow this guide: http://forum.xda-developers.com/showthread.php?t=1264289

This is log and I did everything like in tutorial but no update
[R&D Test Tools Log File]
13:26:21 : Launching SW update
13:26:21 : Unpacking KDZ
13:26:43 : KDZ file extraced
13:26:55 : Files were extracted.
13:26:55 : LGMobileDL Load.
13:26:55 : Port = -1
13:26:55 : Connecting to phone
13:27:05 : Check Phone mode = 2
13:27:27 : Phone type check.......
13:27:28 : _DetachDLL Call
13:27:28 : _DetachDLL Call End
13:27:28 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\V20Q.wdb
13:27:28 : Param : moduleDir =
13:27:28 : Param : waitTime = 0
13:27:28 : Param : UsbHighSpeed = 1
13:27:28 : Param : PhoneMode = 2
13:27:28 : Param : BinVersion = V20Q_00
13:27:28 : Param : AuthMark = 0
13:27:28 : Call fn_StartUpgrade
13:27:28 : CDMA: wParam = 2000, lParam = 0
13:27:28 : Model Dll Msg Not Found(2000, 0)
13:27:43 : CDMA: wParam = 2007, lParam = 0
13:27:43 : Model Dll Msg Not Found(2007, 0)
13:27:44 : CDMA: wParam = 2008, lParam = 9
13:27:44 : Model Dll Msg Not Found(2008, 9)
13:27:44 : CDMA: wParam = 2009, lParam = 1
13:27:44 : Model Dll Msg Not Found(2009, 1)
13:27:44 : CDMA: wParam = 2003, lParam = 32
13:27:44 : Model Dll Msg Not Found(2003, 32)
13:27:44 : CDMA: wParam = 2004, lParam = 1
13:27:44 : Model Dll Msg Not Found(2004, 1)
13:28:14 : CDMA: wParam = 2010, lParam = 3013
13:28:14 : Model Dll Msg Not Found(2010, 3013)
13:28:14 : CDMA: wParam = 2010, lParam = 3009
13:28:14 : Model Dll Msg Not Found(2010, 3009)
13:28:14 : CDMA: wParam = 2010, lParam = 3015
13:28:14 : Model Dll Msg Not Found(2010, 3015)

what is the size of kdz file mine is 226 MB is it OK because link from your post is not working any more.

I manage to update phone to v20q but dont know which baseband to use with this firmware.

Any chance someone can help me with baseband for stock v20q? Thanks

v20q works nice, but CM adds a lot of features. I was amazed with ICS and CM9 Owain kangs

Yes, but since this is not for me I will go with stock, and have a problem now after update to v20q battery drains much faster, what to do and what kernel should I use really need help with it.

Custom rom... Django manuche or topogigi... Really appropriate to a wife.. Affordable.. Every day use.. Battery and good signal
Inviato dal mio LG-P990 con Tapatalk 2

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A

[Q]Is possible to incease the usable RAM up to 700MB?

Well, It is acceptable using Xperia TX even just 642MB usable for Android system and apps, until play the Japanese game call "Kaku-San-Sei Million Arthur" (拡散性ミリオンアーサー, Google Play) which sometime reboot my phone suddenly.
Once I make disable some apps, the frequency of crashing the system is greatly reduced even it could some time cause that happen. Then I guess the RAM usage of this game could be a bit larger then Android try to get more RAM for it, but it is not successful then the system crashed and reboot.
I recognized that the usable RAM on my Xperia is much less than Samsung GALAXY S II (i9100) and even GALAXY Tab 10.1. And look at the iomem and kmsg:
Code:
00500000-00500fff : msm_ssbi.0
00700000-007060ff : hdmi_msm_qfprom_addr
0080207c-0080207f : slimbus_slew_reg
0080207c-0080207f : msm_slim_ctrl
01a01000-01a01fff : msm_etb
01a03000-01a03fff : msm_tpiu
01a04000-01a04fff : msm_funnel
01a1c000-01a1dfff : msm_etm
03000000-0327ffff : wcnss_mmio
03204000-032040ff : pil_riva
04100000-04100fff : kgsl_2d0_reg_memory
04100000-04100fff : kgsl-2d0
04200000-04200fff : kgsl_2d1_reg_memory
04200000-04200fff : kgsl-2d1
04300000-0431ffff : kgsl_3d0_reg_memory
04300000-0431ffff : kgsl-3d0
04400000-044fffff : msm_vidc.0
04500000-045fffff : vfe32
04500000-045fffff : msm_vfe
04600000-046fffff : msm_gemini.0
04700000-047effff : mipi_dsi
04800000-048003ff : csid
04800000-048003ff : msm_csid
04800400-048007ff : csid
04800400-048007ff : msm_csid
04800800-04800bff : ispif
04800800-04800bff : msm_ispif
04800c00-04800fff : csiphy
04800c00-04800fff : msm_csiphy
04801000-048013ff : csiphy
04801000-048013ff : msm_csiphy
04801400-048017ff : csiphy
04801400-048017ff : msm_csiphy
04801800-04801bff : csid
04801800-04801bff : msm_csid
04a00000-04a00fff : hdmi_msm_hdmi_addr
04e00000-04efffff : msm_rotator.0
05100000-051effff : mdp
05300000-053fffff : semc_vpe.0
05300000-053fffff : semc_vpe
08800000-088000ff : pil_qdsp6v4.1
08900000-089000ff : pil_qdsp6v4.2
08b00000-08b00003 : pil_qdsp6v4.2
08b00000-08b00003 : pil_qdsp6v4.1
12180000-121807ff : core_mem
12180800-12181fff : sdcc_dml_addr
12182000-12183fff : sdcc_bam_addr
12240000-12240fff : bamdma_dma
12244000-12247fff : bamdma_bam
12400000-124007ff : core_mem
12400800-12401fff : sdcc_dml_addr
12402000-12403fff : sdcc_bam_addr
12480000-12480003 : gsbi_qup_i2c_addr
12480000-12480003 : qup_i2c
124a0000-124a0fff : qup_phys_addr
124a0000-124a0fff : qup_i2c
12500000-12501000 : msm_hsusb
12500000-12501000 : msm_otg
12500000-12500fff : msm_hsusb_host
12520000-12520fff : msm_hsic_host
12800000-12803fff : pipe_mem
16200000-16200003 : gsbi_qup_i2c_addr
16200000-16200003 : qup_i2c
16280000-16280fff : qup_phys_addr
16280000-16280fff : qup_i2c
16300000-16300003 : gsbi_qup_i2c_addr
16300000-16300003 : qup_i2c
16380000-16380fff : qup_phys_addr
16380000-16380fff : qup_i2c
16500000-16500003 : gsbi_resource
16500000-16500003 : msm_serial_hs
16540000-16540fff : uartdm_resource
18320000-1841ffff : msm_dmov
18500000-1850ffff : qce.0
18500000-1850ffff : qcrypto.0
1a000000-1a000fff : gsbi_resource
1a040000-1a040fff : uartdm_resource
1a040000-1a040fff : msm_serial_hsl
1a200000-1a200003 : gsbi_qup_i2c_addr
1a200000-1a200003 : qup_i2c
1a280000-1a280fff : qup_phys_addr
1a280000-1a280fff : qup_i2c
1a500000-1a5001ff : msm_rng.0
28080000-28081fff : slimbus_physical
28080000-28081fff : msm_slim_ctrl
28084000-28085fff : slimbus_bam_physical
28084000-28085fff : msm_slim_ctrl
28800000-288000ff : pil_qdsp6v4.0
2a03f720-2a04071f : tz_log.0
80200000-88cfffff : System RAM
80300000-80c7094f : Kernel text
80d00000-80fb358b : Kernel data
88d00000-88d00fff : ramdumpinfo
88d01000-88d04fff : amsslog
88de0000-88dfffff : ram_console
90000000-ab4fffff : System RAM
b9902000-bfffffff : System RAM
Code:
[ 0.000000] Memory: 139MB 437MB 102MB = 678MB total
[ 0.000000] Memory: [COLOR="Red"]656612k/891116k available[/COLOR], 38676k reserved, 155640K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc004a000 ( 264 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0a70950 (9667 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0bca170 ( 809 kB)
[ 0.000000] .bss : 0xc0bca194 - 0xc0db358c (1957 kB)
comparing with GALAXY Tab 10.1
Code:
[ 0.000000] Memory: 511MB 230MB = 741MB total
[ 0.000000] Memory: [COLOR="Red"]738404k/738404k available[/COLOR], 309148k reserved, 104448K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf8000000 ( 248 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d7cd4 (6976 kB)
[ 0.000000] .init : 0xc06d8000 - 0xc070d860 ( 215 kB)
[ 0.000000] .data : 0xc070e000 - 0xc079b160 ( 565 kB)
[ 0.000000] .bss : 0xc079b184 - 0xc0a5d230 (2825 kB)
Then is it possible to recompile the kernel to adjust the drivers to make fully use of the RAM?

help [Recovery]TWRP recovery for Optimus 4X HD

I install [Recovery]TWRP recovery for Optimus 4X HD and now my 4xhd boot-loop.
How i can fix it. Plz help.

dzoniandja said:
I install [Recovery]TWRP recovery for Optimus 4X HD and now my 4xhd boot-loop.
How i can fix it. Plz help.
Click to expand...
Click to collapse
Reflash official Rom via kdz
Sent from my GT-N7100 using Tapatalk 2

dzoniandja said:
I install [Recovery]TWRP recovery for Optimus 4X HD and now my 4xhd boot-loop.
How i can fix it. Plz help.
Click to expand...
Click to collapse
how did you installed it?

ty
I fixed problem.
Btw i install "Vanir rom' , but i don't have super user on my phone again.

How did you fixed it eventually?
and about the Super user - simply download it from play market

fixed
http://forum.xda-developers.com/showthread.php?t=2321124
Just follow this.
Btw
How to fix problem with SD card?

backup original rom kdz
This always happen.
11:49:12 : [C:\LGMobileUpgrade] Try to delete folder
11:49:12 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
11:49:12 : Start Date : 2013-09-26 11:49:12
11:49:12 : ---------- QM Testmode ---------
11:49:12 : ***** Check Tool Version *****
11:49:12 : Tool version : 1.5.4.8
11:49:12 : UpgradeDLL version : 1.2.6.7
11:49:12 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:49:12 : LGE USB Driver Version :
11:49:12 : Android PDLV Version :
11:49:12 : Android NDLV Version :
11:49:12 : ******************************************
11:49:12 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:49:12 : SetEmerModeAT()
11:49:12 : _IsConnectedPhone Call
11:49:27 : _IsConnectedPhone(1)
11:49:27 : 0 - NotConnected.
11:49:27 : 1 - Normal connect success
11:49:27 : 2 - Emergency connect success
11:49:28 : *****CheckOS Start********
11:49:28 : Microsoft_Windows7_Professional_
11:49:28 : *****CheckPCSyncPrograms Start*****
11:49:28 : PCSyncPrograms Not Found - OK and ready to upgrade
11:49:28 : Checking the connection with the cell phone...
11:49:28 : dwWaitResetTime(40000 ms)
11:49:29 : Phone Mode(1)
11:49:29 : *****GetPhoneType Start*****
11:49:29 : Phone Type : CDMA
11:49:30 : *****Start GetPreviousStep*****
11:49:31 : _GetPreviousStep(dwStep:0x0)
11:49:34 : _SetPhoneNumber retval=0
11:49:34 : *****GetPhoneModel Start*****
11:49:36 : *****GetPhoneBinaryVersion Start*****
11:50:10 : CSE mode -> Version Replace
11:50:10 : *****Get ESN / IMEI / MEID Start*****
11:50:11 : *****GetPhoneNumber Start*****
11:50:11 : Phone Number : 00000000000
11:50:11 : _GetAuthMark : wAuthMark(65535)
11:50:11 : Wait 3Sec
11:50:14 : _SetAuthMark Fail
11:50:14 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:50:14 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:50:14 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:50:14 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
11:51:58 : [C:\LGMobileUpgrade] Try to delete folder
11:51:58 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
11:51:58 : Start Date : 2013-09-26 11:51:58
11:51:58 : ---------- QM Testmode ---------
11:51:58 : ***** Check Tool Version *****
11:51:58 : Tool version : 1.5.4.8
11:51:58 : UpgradeDLL version : 1.2.6.7
11:51:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:51:58 : LGE USB Driver Version :
11:51:58 : Android PDLV Version :
11:51:58 : Android NDLV Version :
11:51:58 : ******************************************
11:51:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:51:58 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:51:58 : SetEmerModeAT()
11:51:58 : _IsConnectedPhone Call
11:52:13 : _IsConnectedPhone(1)
11:52:13 : 0 - NotConnected.
11:52:13 : 1 - Normal connect success
11:52:13 : 2 - Emergency connect success
11:52:14 : *****CheckOS Start********
11:52:14 : Microsoft_Windows7_Professional_
11:52:14 : *****CheckPCSyncPrograms Start*****
11:52:14 : PCSyncPrograms Not Found - OK and ready to upgrade
11:52:14 : Checking the connection with the cell phone...
11:52:14 : dwWaitResetTime(40000 ms)
11:52:15 : Phone Mode(1)
11:52:15 : *****GetPhoneType Start*****
11:52:15 : Phone Type : CDMA
11:52:16 : *****Start GetPreviousStep*****
11:52:17 : _GetPreviousStep(dwStep:0x0)
11:52:20 : _SetPhoneNumber retval=0
11:52:20 : *****GetPhoneModel Start*****11:52:56 : CSE mode -> Version Replace
11:52:56 : *****Get ESN / IMEI / MEID Start*****
11:52:57 : *****GetPhoneNumber Start*****
11:52:57 : Phone Number : 00000000000
11:52:57 : _GetAuthMark : wAuthMark(65535)
11:52:57 : Wait 3Sec
11:53:00 : _SetAuthMark Fail
11:53:00 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:53:00 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:53:00 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:53:00 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
11:52:22 : *****GetPhoneBinaryVersion Start*****