Related
I'm curious as to why so many people are still flashing their phones (with JK4) when so many others are having problems.
Also, are any people having problems with Gingerbread flashed to the I9000M?
Now, when I get my SGS back, I will be paranoid to do anything to it (It died after JK4 update). I would like to root it so I can install titanium back-up and others, but should I take the chance?
What about Gingerbread? I guess it can also kill the phone like JK4 did. I guess with this phone anything you do you are taking a chance.
Ian
Jk4 was perfect for me. (guess I'm lucky after already having to send it in once).
I would hold off on gingerbread. It's not going to be ready any time soon.
The modem file is used for us Captivate users to have 850 3g and use i9000 roms with a reorientated kernel.
tjsooley said:
The modem file is used for us Captivate users to have 850 3g and use i9000 roms with a reorientated kernel.
Click to expand...
Click to collapse
Huh? You want to captivate user's modems so 850 3rd graders can eat Oriental Krispy Kernels with 9000 Rom-ulans?
I'm looking for a gingerbread install for a bell I9000-m basically just need to make sure that the swype keyboard is fairly decent or similar to the bell one and whichever replacement is found here.
Im guessing I'll need a link to a stock modem driver but I've never done this before with much success besides just kindof bumbeling through a bit.
Let me know anything that could help in my quest here.
I would like to find some links to a good set of files for this update. I've read at many places that for bell you must ask for specific files for this task as it must be more complicated for the bell setup for some reason.
Even a Nexus S firmware if port-able to this device would be fine.
chamunks said:
I'm looking for a gingerbread install for a bell I9000-m basically just need to make sure that the swype keyboard is fairly decent or similar to the bell one and whichever replacement is found here.
Click to expand...
Click to collapse
Any firmware for the i9000 works on the i9000m. There are plenty of threads in the development section with gb roms. Just download the KC1 modem for either Odin or CWM and flash that - I won't get into details, there are a bazillion threads discussing how to do this properly on the i9000m
chamunks said:
Let me know anything that could help in my quest here.
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=656&nojs=1#goto_forumsearch
chamunks said:
I would like to find some links to a good set of files for this update. I've read at many places that for bell you must ask for specific files for this task as it must be more complicated for the bell setup for some reason.
Click to expand...
Click to collapse
You need to stop reading whatever forums you're reading, and stick to this one. There are no specific files, and it is no more complicated than any other i9000.
chamunks said:
Even a Nexus S firmware if port-able to this device would be fine.
Click to expand...
Click to collapse
Then use Cyanogenmod. Again, all of these are in the development subforum.
You mention Cyanogenmod but wouldnt that be froyo?
I didnt really mean just link me to the specific forum subgroup I was hoping for some more specific direction I realize my question wasn't that clear i suppose. Anyways I've basically just had trouble changing the firmware on this device before and I really dont want to end up bricking it with a bad firmware flash.
Basically a good starting point example link would be fantastic I will do some more research and if i manage to do this myself I will post my findings just to close the thread.
Flash JVH and then flash KC1 modem, done.
I also dont want to install a beta gingerbread release if at all avoidable and mostly a vanilla or highly reccomended third party custom would be fine too.
JVH is official release in parts of Europe. I'm with Bell, running JVH with KC1 modem since its release and absolutely no issues.
chamunks said:
You mention Cyanogenmod but wouldnt that be froyo?
Click to expand...
Click to collapse
No, CM7 is 2.3.4 which is Gingerbread. Cyanogenmod 6 (which was froyo afaik) never really came to be on the i9000.
chamunks said:
I didnt really mean just link me to the specific forum subgroup I was hoping for some more specific direction I realize my question wasn't that clear i suppose. Anyways I've basically just had trouble changing the firmware on this device before and I really dont want to end up bricking it with a bad firmware flash.
Click to expand...
Click to collapse
There isn't really anything specific for the i9000m. Really, its just a matter of picking a rom and following the flashing instructions. If you're flashing a stock release (like JVH lets say), use Odin, flash the tarball with update bootloader checked and once thats done, flash an appropriate modem for Bell (for 850mhz), like KC1 that I find works very well.
If you're flashing a cooked rom, like those in the development subforum, then you'd flash something like JVH, flash an appropriate kernel with clockworkmod (I prefer speedmod, but there are others), then you'd install the cooked rom through cwm recovery.
chamunks said:
Basically a good starting point example link would be fantastic I will do some more research and if i manage to do this myself I will post my findings just to close the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1011901
That thread should have all the information you need on flashing JVH along with screenshots and links to the roms.
chamunks said:
I also dont want to install a beta gingerbread release if at all avoidable and mostly a vanilla or highly reccomended third party custom would be fine too.
Click to expand...
Click to collapse
As others have said, JVH is an official release for a lot of European carriers. It will work fine on the i9000m. I was running JVH + KC1 Modem for a while before switching to the latest Cyanogenmod nightly (which works absolutely fantastic now).
If you're looking for an official Bell Gingerbread release.... you'll just have to keep waiting. Bell is slower than the second coming. Just keep a full KC1 or JL2 (with bootloaders) around so you can flash back to stock if you need be.
Also, you said you had trouble flashing before. I'd suggest following that link in my post above, and if you get stuck, come back and we can step you through.
And finally, you really can't brick you phone as long as you are able to access download mode and 3 button recovery. Absolutely make sure you can access these two modes before flashing anything.
I have actually had issues getting into recovery mode sometimes but not usually, but have no problem entering download mode. I think at one point I wound up with upload mode... which doesent seem to be documented... But dont quote me on that one as it was a while ago (after searching high and low on my NAS I cant find the photo i took sorry). I have actually had to send this phone off to bell to get them to fix it twice now.
Once due to my inability to do this properly without making a forum post asking these question and another due to a bad Kies update sending my phone into a boot loop.
So you say Cyanogen nightly works well im thinking I might give that a shot as im sure there are good reasons why you would want to use cyanogen over another release. Im just hoping for no weird Telco specific crap on my phone unless its Bell specific if i must have even that.
Would I go into the ROM list thread for the cyanogenmod nightly? http://goo.gl/IBbEm
Which leads me to this? http://goo.gl/b5UwG
or is there a better way to obtain CM7? Also what would be a good location to try and find my modem driver (KC1)?
I'm sorry to spam questions here but one final one. Would there be a good boot loader that I should strive for, if any?
SaneinOne said:
JVH is official release in parts of Europe. I'm with Bell, running JVH with KC1 modem since its release and absolutely no issues.
Click to expand...
Click to collapse
I am running the above now. I was on Darky 9.5, then upgraded yesterday to Ficeto JVB, Dark Core 2.2 and Darky's v10 RC6. Then flashed Dark Core 2.3.
I then flashed KC1 modem this morning.
Running great and loving the rom so far.. its a base rom, so not a lot of features in it but at least i can customize it to how i like it so far.
I've downloaded this file I9000UGKC1 ## 512.PIT 2.2 2011 March from samfirmwares I'm hoping it works out well for giving me the modem driver.
And
Gingerbread 2.3.3: XWJVH from http://goo.gl/AEYzr to get a gingerbread release with a boot loader.
I will now look for a copy of odin hopefully it doesn't matter which version I get but I've noticed there is allot of fuzz when it comes to odin versions or even where to obtain it even. I want to obtain it from a legitimate source but it seems as though there is no specific location as to where to get it.
At some point I would like to try Cyanogen as everyone holds it in rather high regard though I'm not really sure what the benefits would be.
Some roms on here come with odin. You can also get it from samfirmware. The development thread is where you will find all information for each release. There's a few sources for cwm flashable modems. Odin isn't bad at all, it can be a little finicky with win 7 64 bit for some people but I have had no problems with it at all. Good luck and hope you find a rom that suits you.
Sent from my GT-I9000 using XDA Premium App
shadoslayer said:
There isn't really anything specific for the i9000m. Really, its just a matter of picking a rom and following the flashing instructions. If you're flashing a stock release (like JVH lets say), use Odin, flash the tarball with update bootloader checked and once thats done, flash an appropriate modem for Bell (for 850mhz), like KC1 that I find works very well.
Click to expand...
Click to collapse
Do you see much of a difference with the KC1 modem? Im running the JVO modem and it works fine for me usually have 3-4 bar connection, 3G tends to run quite often and get a 1Mbps down and 2 Mbps up connection, only thing I notice is that it runs on the 1900 band mostly
Any benefits to switching to KC1? Battery savings?
Do you see much of a difference with the KC1 modem? Im running the JVO modem and it works fine for me usually have 3-4 bar connection, 3G tends to run quite often and get a 1Mbps down and 2 Mbps up connection, only thing I notice is that it runs on the 1900 band mostly
Click to expand...
Click to collapse
Turns out the
PDA: XWJVH
MODEM: XXJVO
CSC: NEEJV3 or XEEJV3 (Only difference between NEE and XEE is the CSC code)
Build Date: Wed May 4 18:03:59 KST 2011
Click to expand...
Click to collapse
seems to work fine with working modem from http://goo.gl/02b7S
BUT
there is no OpenVpn OR SIP and those are the two things that I really wanted out of gingerbread.
I personally found JL2 better than KC1. I get up to 5mb/s down and 3mb/s up.
About cyanogen, you gotta try it to see . I didn't believe the difference would be noticeable either...
If you want modems for cm7, click the JL2 modem link in my sig, there's a post full of them.
For modems for other roms, look over there : http://forum.xda-developers.com/showthread.php?t=876391
And just like everyone else said, you can flash i9000 roms on i9000m without any problems - in fact even flashing a different modem isn't necessary, depending on your provider, it's just better.
those are features commonly found within the custom roms for jvh
Thanks for this thread. Provided the modem for me to get this working properly.
If I were you I would stick with a Daryky rom. his 10 finaly is a little slow and glitchy at times so I recommend 10 RC6. it's a stock jvh rom with his tweeks. Cyanogen is basically vanilla rom. it's so fast (the best i've flashed so far) but it's missing swype, like you stated you wanted that. I tried getting the beta swype but it didn't work. anyways i'm actually liking the gingerbread keyboard haha. so ya, if you need swype stick with darky rom, if your looking to try an amazing rom try cyanogen.
The swype beta installed without any problems for me on cm7...
The only thing is I speak french, so either I get the english keyboard, or I get the "France" french one... which is AZERTY... u_U
spectre85 said:
If I were you I would stick with a Daryky rom. his 10 finaly is a little slow and glitchy at times so I recommend 10 RC6. it's a stock jvh rom with his tweeks. Cyanogen is basically vanilla rom. it's so fast (the best i've flashed so far) but it's missing swype, like you stated you wanted that. I tried getting the beta swype but it didn't work.
Click to expand...
Click to collapse
I used Darky's rom for a looong time before switching to something else. I really didn't like the theme (at the time), and I found roms that seemed to perform better. I also ran a deodexed JL2 that I cooked myself for a while.
You can get swipe APKs from just about any custom rom out there, just pull the apk out of the .zip and install it. Or, I just signed up for swipe beta and installed it - works great.
Anyway, I guess the bottom line is that there are so many options available, and so many fantastic cooked roms available in the development thread, that trying them and finding one you really like is the only way to go.
I bought my Captivate in December, and have since rooted, updated to Froyo through Kies, and even flashed a couple of kernels (currently running Firebird). I log onto and read posts on XDA almost daily, its kind of like my daily newspaper! Anyway, I have never understood how its possible that so many members have an i897 Captivate-based phone, yet is able to run i9000-based modems, kernels and ROMS. I've searched and googled, and can't get a straight answer, maybe my search terms need improvement, I don't know. But, is it possible to have
i9000 ROMS (with a i9000 modem/kernel of course) on our United States i897 Captivate? Or, is it that more members on this forum have i9000 based phones than I thought?
aicirt17 said:
I bought my Captivate in December, and have since rooted, updated to Froyo through Kies, and even flashed a couple of kernels (currently running Firebird). I log onto and read posts on XDA almost daily, its kind of like my daily newspaper! Anyway, I have never understood how its possible that so many members have an i897 Captivate-based phone, yet is able to run i9000-based modems, kernels and ROMS. I've searched and googled, and can't get a straight answer, maybe my search terms need improvement, I don't know. But, is it possible to have
i9000 ROMS (with a i9000 modem/kernel of course) on our United States i897 Captivate? Or, is it that more members on this forum have i9000 based phones than I thought?
Click to expand...
Click to collapse
Im just taking a shot here, but i think its because our roms are based off the i9000 roms... (theyre not the same, but theyre in the same class...)
aicirt17 said:
But, is it possible to have
i9000 ROMS (with a i9000 modem/kernel of course) on our United States i897 Captivate?
Click to expand...
Click to collapse
Yes. If you flash a stock version of an i9000 ROM then you will have orientation and Home button issues though. That is why there are kernels in the Captivate development section that are based on i9000 source code and reoriented along with other tweaks. You should also take care to read and understand exactly what it is that you are doing before attempting to flash any ROM, especially one made for an extremely similar, yet different, phone.
As I've learned the hard way, make sure to stay in the captivate development section. There are plenty of I9000, roms to pick from that will work fine for your i897. Just make sure to either use the kernel with the rom or pick a reoriented one. Keep in mind there is some call quality loss with the i9000 roms. And most of all, be careful with bootloaders.
Sent from my SAMSUNG-SGH-I897 using XDA App
cardassianvol said:
Yes. If you flash a stock version of an i9000 ROM then you will have orientation and Home button issues though. That is why there are kernels in the Captivate development section that are based on i9000 source code and reoriented along with other tweaks. You should also take care to read and understand exactly what it is that you are doing before attempting to flash any ROM, especially one made for an extremely similar, yet different, phone.
Click to expand...
Click to collapse
So, I can take my cappy as it is now (stock Froyo, Firebird kernel), and flash an i9000 ROM, making sure to also flash an i9000 modem and kernel (if the ROM doesn't already come with one), and that's it?
Cdub3 said:
As I've learned the hard way, make sure to stay in the captivate development section. There are plenty of I9000, roms to pick from that will work fine for your i897. Just make sure to either use the kernel with the rom or pick a reoriented one. Keep in mind there is some call quality loss with the i9000 roms. And most of all, be careful with bootloaders.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Bootloaders, the one thing I haven't read up on yet. Think I'll read, read, read, and then read a little more after that. I forgot about the bootloaders. Thanks for the heads up Cdub3!
aicirt17 said:
Bootloaders, the one thing I haven't read up on yet. Think I'll read, read, read, and then read a little more after that. I forgot about the bootloaders. Thanks for the heads up Cdub3!
Click to expand...
Click to collapse
u only need to get acquainted with bootloaders if you are planning to jump to a gingerbread ROM other than cyanogenmod7 or miui from 2.1/2.2 ROMs. GB bootloader+2.1/2.2 secondary bootloader=
aicirt17 said:
So, I can take my cappy as it is now (stock Froyo, Firebird kernel), and flash an i9000 ROM, making sure to also flash an i9000 modem and kernel (if the ROM doesn't already come with one), and that's it?
Click to expand...
Click to collapse
it must be a REORIENTED kernel in order for it to work. in all honesty, i have found that its better to select any rom from the captivate section rather than using a straight i9000 rom from the i9000 forums. go ahead and try a few out, but you will quickly see why i would suggest getting one of the mature i9000 roms from the captivate section instead. references to front facing camera, lack of haptic feedback on the home key, and other little things will begin to creep up on you. it gets annoying.
aicirt17 said:
So, I can take my cappy as it is now (stock Froyo, Firebird kernel), and flash an i9000 ROM, making sure to also flash an i9000 modem and kernel (if the ROM doesn't already come with one), and that's it?
Click to expand...
Click to collapse
You should flash the i9000 ROM and then flash a reoriented i9000 kernel from the Captivate development section and while the modem must be an i9000 modem when using an i9000 based ROM, you should research which modems support your carrier best. I'll assume you are on AT&T and say you need a modem that supports the 850MHz band if you want 3G support everywhere AT&T offers it when you travel inside the US. The standard i9000 modems support the 1900MHz band, which AT&T uses in my area. I'd suggest following the guides in the Captivate Development section though. Most ROMs there have done this work for you. They are almost all based on the official i9000 releases. There is nothing wrong with playing around after you understand the basics though. I run stock i9000 Gingerbread with the i9000 reoriented kernel by xcaliburinhand. Then I tailor it to my liking.
I just got a captivate last night and i have unlocked and and rooted it
it has a firmware of 2.1 - update 1
idk if thats the most recent update
i was told i can not update the phone with a t-mobile sim card in it so can anyone post a thread on updated versions and what do you all think is the best rom?
THANKS
There is no "best" rom. It's what's "best" for you. Read the forums and learn to flash 2.2 roms first.
I must warn you, flashing becomes very addictive.
Sent from my GT-I9000 using XDA App
Yea i know i have a sidekick 4g and ive tried about every rom on it
thanks for the info though
Tyler0309 said:
Yea i know i have a sidekick 4g and ive tried about every rom on it
thanks for the info though
Click to expand...
Click to collapse
I recommend trying MIUI, the customization is what puts it over the top!
Here are a few different versions of MIUI:
Galnet**What I prefer**
http://www.galnetmiui.co.uk/twooey/v3/Twooey-V3-i897.zip
Prototypes release
http://forum.xda-developers.com/showthread.php?t=1066885
MIUI.us
http://roms.miui.us/1.8.12/MIUI.us_captivatemtd_1.8.12_Eng_Deo_ZipA_Signed.zip
Ok ill give it a try..do i have to update to a different version> im running 2.1 right now
Tyler0309 said:
Ok ill give it a try..do i have to update to a different version> im running 2.1 right now
Click to expand...
Click to collapse
I've not been on 2.1 since phone came out. I would use odin one click to goto 2.2 stock. Root it then install cwm and then follow this guide if your going to try Galnet's MIUI.
http://www.galnetmiui.co.uk/content/forum/guides/(guide)-i897-galaxy-s-captivate-gb-bootloaders/
Then just pop the MIUI.zip on root of sdcard and install from CWM.
Tyler0309 said:
I just got a captivate last night and i have unlocked and and rooted it
it has a firmware of 2.1 - update 1
idk if thats the most recent update
i was told i can not update the phone with a t-mobile sim card in it so can anyone post a thread on updated versions and what do you all think is the best rom?
THANKS
Click to expand...
Click to collapse
Wow... so... You should probably READ a lot more before flashing anything, but I'll give you a few hints to get you going:
1) Make sure you understand what a "PBL", "SBL", "Kernel", and "Modem" are and how they are placed/installed in your phone.
2) Learn how to correctly and safely use ODIN (and/or Heimdall).
3) Learn about the various methods of recovery for "soft bricks", and if necessary for your hardware revision, possibly invest in a jig (also learn what a jig is)
4) There are 2 different types/branches of ROMs for the Captivate:
-- Samsung Branch
-- AOSP Branch
Within the "Samsung" types you have:
- i9000 ROMs (like JVP, JVR, JP8, etc)
- i897 ROMs (like JF6, KF1, etc)
Within the "AOSP" types you have:
- CM7
- MIUI
- Other AOSP-based ROMs
Which is "better" is relative. CM7 and MIUI have features that aren't present in the Samsung ROMs, and both offer a bit more customization than the Samsung ROMs. However, only the Samsung ROMs offer GPU accelerated video playback, and they tend to have significantly better battery life than the AOSP-type ROMs. Also the Samsung-type ROMs used to be much more stable than the AOSP branches, but recently, the tide may have turned in the other direction. Some of the low-level radio settings are also unavailable in any of the AOSP builds. And finally, some of the Samsung stock camera features are unavailable in CM7/MIUI.
It really all depends what you want... Do you want closer to stock "open source" Android? Or do you want Samsung's vision of what they think Android should be?
Also, the whole kernel/modem part is dependent on what branch of ROM you plan on running. When using a i9000-Samsung ROM, you pretty much have to use an i9000 kernel and modem. When using a i897-Samsung ROM, you pretty much have to use an i897 kernel and modem. The rules for CM7/MIUI are a bit more vague, but at the very least you'll need to use a CM7/MIUI (most AOSP-type kernels are interchangeable) compatible kernel.
The best advice is really to try them all out and see what you like the most. If you're currently on stock 2.1 (which it sounds like you are), at the very least you should upgrade to some variant of Gingerbread (2.3.4 preferably). You will definitely notice a big difference in terms of speed and functionality. From there, well, it's all really up to you...
OR alternatively, just start throwing stuff on your phone and see what happens. Just PLEASE don't come crying back in the Captivate General forum with a "OMG I bricked my phone!!! Plz help!!!" thread. Fair warning...
Just a suggestion, but become familiar with Odin one click. Make sure your captivate has 3 button recovery, and read, re- read, and read again the directions of every rom before you flash it. Always make a nandroid back up if possible, and read the threads.if you have questions, so did someone else and the answer is probably already out there .use search. Some People will rip your head off if you don't. as far as miui goes .....i was a flashaholic when I got phone. After switching to miui, It is very unlikely that I will ever leave. Best rom ever imho. And it updates every Friday so that satisfied the flashing urge. Usually it gets better with each release. The last couple have been a little rough though. Might want to spend the 8 bucks and have a download jig on standby. Can get it from mobiltech videos. Its worth it though
Sent from my I897 using XDA Premium App
Shammyh said:
Wow... so... You should probably READ a lot more before flashing anything, but I'll give you a few hints to get you going:
1) Make sure you understand what a "PBL", "SBL", "Kernel", and "Modem" are and how the are placed/installed in your phone.
2) Learn how to correctly and safely use ODIN (and/or Heimdall).
3) Learn about the various methods of recovery for "soft bricks", and if necessary for your hardware revision, possibly invest in a jig (also learn what a jig is)
4) There are 2 different types/branches of ROMs for the Captivate:
-- Samsung Branch
-- AOSP Branch
Within the "Samsung" types you have:
- i9000 ROMs (like JVP, JVR, JP8, etc)
- i897 ROMs (like JF6, KF1, etc)
Within the "AOSP" types you have:
- CM7
- MIUI
- Other AOSP-based ROMs
Which is "better" is relative. CM7 and MIUI have features that aren't present in the Samsung ROMs, and both offer a bit more customization than the Samsung ROMs. However, only the Samsung ROMs offer GPU accelerated video playback, and they tend to have significantly better battery life than the AOSP-type ROMs. Also the Samsung-type ROMs used to be much more stable than the AOSP branches, but recently, the tide may have turned in the other direction. Some of the low-level radio settings are also unavailable in any of the AOSP builds. And finally, some of the Samsung stock camera features are unavailable in CM7/MIUI.
It really all depends what you want... Do you want closer to stock "open source" Android? Or do you want Samsung's vision of what they think Android should be?
Also, the whole kernel/modem part is dependent on what branch of ROM you plan on running. When using a i9000-Samsung ROM, you pretty much have to use an i9000 kernel and modem. When using a i897-Samsung ROM, you pretty much have to use an i897 kernel and modem. The rules for CM7/MIUI are a bit more vague, but at the very least you'll need to use a CM7/MIUI (most AOSP-type kernels are interchangeable) compatible kernel.
The best advice is really to try them all out and see what you like the most. If you're currently on stock 2.1 (which it sounds like you are), at the very least you should upgrade to some variant of Gingerbread (2.3.4 preferably). You will definitely notice a big difference in terms of speed and functionality. From there, well, it's all really up to you...
OR alternatively, just start throwing stuff on your phone and see what happens. Just PLEASE don't come crying back in the Captivate General forum with a "OMG I bricked my phone!!! Plz help!!!" thread. Fair warning...
Click to expand...
Click to collapse
Well said.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Tyler0309 said:
I just got a captivate last night and i have unlocked and and rooted it
it has a firmware of 2.1 - update 1
idk if thats the most recent update
i was told i can not update the phone with a t-mobile sim card in it so can anyone post a thread on updated versions and what do you all think is the best rom?
THANKS
Click to expand...
Click to collapse
a very simple and easy way to start with...
2.1 is eclair..
2.2 froyo
2.3 gingerbread..
means 2.1 is oldest and 2.3 is latest in case of official roms..
so obviously new version will hav more features and faster in speed...
so now u can take baby step and install 2.2 ..and use it for few days..and get the feel of it..then again after sometime u can install 2.3...
or else u can directly jump to 2.3....which is gingerbread....u can install stock kf1 on ur phone..its leaked official gb...if u search a bit..u will get it..
then u can use it for a lil while and get the feel of gb stock rom..in the meanwhile u can read xda abt available custom roms..and then install any of them...
coz every memeber here in xda will suggest the custom rom they r using..coz they r lovin the rom then only they r using....like for me..since the time i started flashin..i always used APEX ROM..so i will say its the best....
but again thats just me..
so decision is always urs...
I rooted my phone sometime back and upgraded from eclair to froyo 2.2 (not at&t's froyo)
I have a 3 part question:
My question is do I have to flash back to eclair in order to install gingerbread? Or can I go from the version of froyo I have to gingerbread?
My last question is what is the best version of gingerbread out there?
The best answer is Read on the dev site the different GB roms. You have to choose from "leaked" stock KF1 (2.3.3), "leaked" stock KH3 (2.3.4), a few roms based out of KF1 and KH3, a ton of I9000 ports. Up to you to choose. Id stick to native Ginger bread like KF1 or KH3. You need to flash Gingerbread bootloaders though, and that carries risk. Check out all the Dev threads about them.
To answer the first question.... You definitely don't have to go as far back as Eclair; it is just preferred to start from a stock ROM. I personally always return to stock KB1 if I'm going to flash a Froyo custom ROM, or use KF1 for Gingerbread. I've never used AOSP, so I can't speak to those.
Also, remember that newer Captivate models will not boot if you try to flash Eclair. I made that mistake the first time I ever tried to flash a custom ROM.
Finally, be sure to pay attention to what boot loaders the particular ROM you want to use asks for, as that will affect what exact sequence/technique you use to flash. I definitely recommend Heimdall because of the level of control you have over what parts you want to flash.
Just to add my two cents: If you are Windows 7 x64 and using Odin, make sure you use XP Service pack 2 compatiblity mode, this also makes you use admin mode with it (the most important thing).
prbassplayer said:
The best answer is Read on the dev site the different GB roms. You have to choose from "leaked" stock KF1 (2.3.3), "leaked" stock KH3 (2.3.4), a few roms based out of KF1 and KH3, a ton of I9000 ports. Up to you to choose. Id stick to native Ginger bread like KF1 or KH3. You need to flash Gingerbread bootloaders though, and that carries risk. Check out all the Dev threads about them.
Click to expand...
Click to collapse
Why stick with native gingerbread? No hspa, no kernel source for sound/color enhancement.
Ported froyo roms were more popular and feature ridden at first for this exact reason. and there are still not many kb1 roms because the time that came around I9000 ports were way more complete.
Same holds true. Native builds will always be playing catch up.
psych0phobia said:
Also, remember that newer Captivate models will not boot if you try to flash Eclair. I made that mistake the first time I ever tried to flash a custom ROM.
Click to expand...
Click to collapse
That is only true for a particular build of eclair, jf6 the firmware contained in odin one click. There are other builds of eclair that will work on newer phones...
HSUPA support isn't important to me. I rarely use ATT's network since 90% of the time im near WIFI. I do miss Voodoo color fix, but thats about it. Ive used other I9000 ports and all of them seem to get funky after a while. Native builds don't. BUT like I said BEST answer was for him to read and choose from the DEV section. What some roms have that I like doesn't mean other people do. There is no "best" rom, its a matter of choice.
Edit: Remembered something else i do miss, BLN =/
froyo to gingerbread on captivate part 2
Thank you all very useful info.
But now I have 1 more question. I am running windows 7 partitioned on my Macbook Pro. I keep getting this error when using ODIN. "The application was unable to start correctly (0xc000007b). Click OK to close the application."
Is there a way I can just do this on the Mac side? I haven't been able to look this up but I think the error has something to do with .NET framework I believe I have 4.0 not sure if I need to install all versions?
izda8 said:
Thank you all very useful info.
But now I have 1 more question. I am running windows 7 partitioned on my Macbook Pro. I keep getting this error when using ODIN. "The application was unable to start correctly (0xc000007b). Click OK to close the application."
Is there a way I can just do this on the Mac side? I haven't been able to look this up but I think the error has something to do with .NET framework I believe I have 4.0 not sure if I need to install all versions?
Click to expand...
Click to collapse
I've never gotten that error. Try re-downloading. You can also use Heimdall a how to can be found here
izda8 said:
I think the error has something to do with .NET framework I believe I have 4.0 not sure if I need to install all versions?
Click to expand...
Click to collapse
Odin does not use .NET, so that's not the problem. (The icon is a dead giveaway that it uses MFC.)