I'm attempting to make an install script for a couple of mods just as before on the Droid X. Unfortunately I'm getting different errors at different times. One of the errors is (Status 0)... and the other is (Status 6).
Also, Mount says that it expects 4 args, got 3.
What changed?
nitro66215 said:
I'm attempting to make an install script for a couple of mods just as before on the Droid X. Unfortunately I'm getting different errors at different times. One of the errors is (Status 0)... and the other is (Status 6).
Also, Mount says that it expects 4 args, got 3.
What changed?
Click to expand...
Click to collapse
You need to use the right Syntax to mount /system . Best way... Busybox.
run program("/sbin/busybox" , "mount", "/system");
DroidTh3ory said:
You need to use the right Syntax to mount /system . Best way... Busybox.
run program("/sbin/busybox" , "mount", "/system");
Click to expand...
Click to collapse
So... I've tried this.... and I get....
Error in /sdcard/update.zip
(Status 6)
For Shi*s and giggles... I just did a test script.
ui_print(" ");
ui_print("Mount Bionic Script...");
run_program("/sbin/busybox", "mount", "/system");
ui_print("Doing Something.......");
ui_print("Installing Files");
ui_print(" ");
ui_print("** Unmounting System **");
unmount("/system");
This errors out. I have the META-INF folder from another Bionic update that someone else created, so I'm assuming that the files within (other than the script) will work as is.
Here is my mod script and update-binary. Make the appropriate folders for your mod and give it a go.
Case and spacing is essential as I am sure you know.
3G ICON VISUAL FIX
DroidTh3ory said:
Here is my mod script and update-binary. Make the appropriate folders for your mod and give it a go.
Case and spacing is essential as I am sure you know.
3G ICON VISUAL FIX
Click to expand...
Click to collapse
ui_print(" ");
show_progress(0.800000, 35);
ui_print(" ");
ui_print("** Mounting this ***** **");
run_program("/sbin/busybox", "mount", "/system");
ui_print(" ");
ui_print("** Installing Your MOD **");
ui_print(" ");
ui_print("** Unmounting System, Rock Out!! **");
unmount("/system");
show_progress(0.050000,0);
Ugh... same error. I only deleted your package extract. I'm using 7-zip and just doing store. Is that still the preferred method?
nitro66215 said:
ui_print(" ");
show_progress(0.800000, 35);
ui_print(" ");
ui_print("** Mounting this ***** **");
run_program("/sbin/busybox", "mount", "/system");
ui_print(" ");
ui_print("** Installing Your MOD **");
ui_print(" ");
ui_print("** Unmounting System, Rock Out!! **");
unmount("/system");
show_progress(0.050000,0);
Ugh... same error. I only deleted your package extract. I'm using 7-zip and just doing store. Is that still the preferred method?
Click to expand...
Click to collapse
What is it installing if there is no package extract?
I don't use 7zip, I just compress in linux... Couldn't really say in that.
DroidTh3ory said:
What is it installing if there is no package extract?
I don't use 7zip, I just compress in linux... Couldn't really say in that.
Click to expand...
Click to collapse
I plan on doing the install later, but I just wanted to do a test script without install. Just some "Hello World" text to make sure I got something going on.
I even just did that....
ui_print("Hello World");
Gave me the same error!
Ok.... so.... It is now working after a reboot of Recovery. Don't ask me why. And I am using standard windows zipping.
Related
I'm new to android and am wondering if there were any tools available to port the full_wipe.zip from the desire hd/inspire 4g to the vivid. It's a great tool that I used on the inspire and will reduce the issues that a lot of users might run into for this device. The later versions even gave the ability to format all of the memory to EXT4. I'm willing to work on a version if someone is able to point me in the right direction.
Edit: this tool might also be an option as a replacement to our current recovery.
http://forum.xda-developers.com/showthread.php?t=1161710
not really sure i understand the need for it?
this is an inspire/dhd script:
Code:
ui_print(" ");
ui_print("-------------------------------- ");
ui_print("| FULL WIPE v 1.5 |");
ui_print("| Fixed For Ext4 |");
ui_print("| Mero01 |");
ui_print("-------------------------------- ");
ui_print(" ");
show_progress(0.500000, 0);
ui_print("-Checking Model ID");
assert(getprop("ro.product.device") == "ace" || getprop("ro.build.product") == "ace" || getprop("ro.product.board") == "ace");
ui_print("-Success!");
ui_print("-Model ID - HTC Ace");
ui_print("-Ok to proceed");
ui_print("Now preparing for a clean install of any EXT4 ROM ");
ui_print("Please be patient");
ui_print("1st boot may take a few minutes");
show_progress(0.500000, 40);
ui_print("-Formatting Data");
format("ext4", "EMMC", "/dev/block/mmcblk0p26");
ui_print("-Formatting System");
format("ext4", "EMMC", "/dev/block/mmcblk0p25");
ui_print("-Writing System");
mount("ext4", "EMMC", "/dev/block/mmcblk0p25", "/system");
package_extract_dir("system", "/system");
show_progress(0.400000, 0);
ui_print("-Formatting Cache");
assert(unmount("/cache"), ui_print("/cache unmounted"));
format("ext4", "EMMC", "/dev/block/mmcblk0p27");
delete_recursive("/sdcard/.data/navigator/Data/Temporary");
show_progress(0.100000, 0);
ui_print(" ");
ui_print("FULL WIPE COMPLETE =]");
ui_print(" ");
ui_print(" ");
ui_print("Make SURE YOU INSTALL A ROM...");
ui_print("Make SURE YOU INSTALL A ROM...");
ui_print("Make SURE YOU INSTALL A ROM...");
unmount("/system");
all it does is print lines and format the following:
/data
/system
/cache
and it goes an extra step and deletes a directory on your sdcard that looks non-volatile....
this is just one of the scripts i had from my inspire days....im sure there are others...
but the real deal is this:
/system is always formatted during a rom install
/cache usually is also, but not always
if you do a wipe/factory reset, it formats /data and /cache
so redundant wipe is redundant....
Would the custom ext4 recovery be a better option? It has the same features as cwm recovery but also adds the wipe functions of the script. I prefer the custom recovery but am not sure to where to start.
Apatche69 said:
Would the custom ext4 recovery be a better option? It has the same features as cwm recovery but also adds the wipe functions of the script. I prefer the custom recovery but am not sure to where to start.
Click to expand...
Click to collapse
since nobody has created an ext4 recovery for our device, its not even close to viable yet
but i dont think you get what im saying.....those functions are INCLUDED in the recovery we have....
wipe data/factory reset will wipe /data and /cache
installing a rom, formats and loads /system
why does anyone feel the need for another script that does the same thing that you can do with one option in recovery?
Apatche69 said:
Would the custom ext4 recovery be a better option? It has the same features as cwm recovery but also adds the wipe functions of the script. I prefer the custom recovery but am not sure to where to start.
Click to expand...
Click to collapse
Follow the superguide ROM flashing guide and you won't need a script like this. Wipe cache, data, dalvik.
Sent from my HTC PH39100 using xda premium
I've created the template needed for Dsixda's kitchen, rename (remove .txt) the attached file to m7wls & place in the \kitchen\tools\edify_defs folder
[KITCHEN] Android Kitchen, v0.223 [Linux / Mac / Windows]
one thing I should point out....using the latest TWRP, a ROM created w/ this kitchen will not flash. You will need to replace the update-binary in \META-INF\com\google\android. See the attached file (remove the .zip).
also, you'll want to update the updater-script to replace the format /system cmd to:
format("ext4", "EMMC", "/dev/block/mmcblk0p37", "0", "/system");
...
FIRST!! Thanks bro
O.M.J said:
I've created the template needed for Dsixda's kitchen, rename (remove .txt) the attached file to m7wls & place in the \kitchen\tools\edify_defs folder
[KITCHEN] Android Kitchen, v0.223 [Linux / Mac / Windows]
...
Click to expand...
Click to collapse
Thank you!
O.M.J said:
I've created the template needed for Dsixda's kitchen, rename (remove .txt) the attached file to m7wls & place in the \kitchen\tools\edify_defs folder
[KITCHEN] Android Kitchen, v0.223 [Linux / Mac / Windows]
...
Click to expand...
Click to collapse
This might be a stupid question... but since i havent used a kitchen since my htc diamond days i figured i would ask. Are kernels compiled from binaries in the kitchen or is it more like the old school kitchens where you just pick the options.
sybe said:
This might be a stupid question... but since i havent used a kitchen since my htc diamond days i figured i would ask. Are kernels compiled from binaries in the kitchen or is it more like the old school kitchens where you just pick the options.
Click to expand...
Click to collapse
You cant compile the kernel with the kitchen, You can make some changes to the ramdisk and swap out the zimage.
Thanks for this man! :thumbup:
Sent from my HTCONE using Tapatalk 2
Hi to ALL
i m yamil
i use dsixda kitchen to cook a rom for one sprint but.. users reported Recovery fail..
i let here my updater script, it has no aroma, if somebody can help me will be great
Here is link of my script http://d-h.st/M0f
Thanks in advance
dragonesdenano said:
Hi to ALL
i m yamil
i use dsixda kitchen to cook a rom for one sprint but.. users reported Recovery fail..
i let here my updater script, it has no aroma, if somebody can help me will be great
Here is link of my script http://d-h.st/M0f
Thanks in advance
Click to expand...
Click to collapse
Have you added the HTC ONE template OMJ posted the the kitchen?
It should look like this
Code:
mount("ext4", "EMMC", "/dev/block/mmcblk0p39", "/data");
package_extract_dir("data", "/data");
format("ext4", "EMMC", "/dev/block/mmcblk0p37", "0", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p37", "/system");
delete_recursive("/system");
package_extract_dir("system", "/system");
You dont this. Delete that file/folder from the zip
Code:
package_extract_file("check_data_app", "/tmp/check_data_app");
set_perm(0, 0, 0777, "/tmp/check_data_app");
run_program("/tmp/check_data_app");
Add these lines to fix the Paid app issue in the playstore
Code:
symlink("/system/lib/modules/moc_crypto.ko.3.4.10","/system/lib/modules/moc_crypto.ko");
symlink("/system/lib/modules/moc_platform_mod.ko.3.4.10","/system/lib/modules/moc_platform_mod.ko");
This will flash the boot.img , No need for the method your using
Code:
package_extract_file("boot.img", "/tmp/boot.img");
run_program("/sbin/busybox", "dd", "if=/tmp/boot.img", "of=/dev/block/mmcblk0p33");
delete("/tmp/boot.img");
benny3 said:
Have you added the HTC ONE template OMJ posted the the kitchen?
It should look like this
Code:
mount("ext4", "EMMC", "/dev/block/mmcblk0p39", "/data");
package_extract_dir("data", "/data");
format("ext4", "EMMC", "/dev/block/mmcblk0p37", "0", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p37", "/system");
delete_recursive("/system");
package_extract_dir("system", "/system");
You dont this. Delete that file/folder from the zip
Code:
package_extract_file("check_data_app", "/tmp/check_data_app");
set_perm(0, 0, 0777, "/tmp/check_data_app");
run_program("/tmp/check_data_app");
Add these lines to fix the Paid app issue in the playstore
Code:
symlink("/system/lib/modules/moc_crypto.ko.3.4.10","/system/lib/modules/moc_crypto.ko");
symlink("/system/lib/modules/moc_platform_mod.ko.3.4.10","/system/lib/modules/moc_platform_mod.ko");
This will flash the boot.img , No need for the method your using
Code:
package_extract_file("boot.img", "/tmp/boot.img");
run_program("/sbin/busybox", "dd", "if=/tmp/boot.img", "of=/dev/block/mmcblk0p33");
delete("/tmp/boot.img");
Click to expand...
Click to collapse
Thank you very much for the amazing help.
I did, i ve added to the kitchen.... Anyway will check all again.
Thanks again
SkyDragon© You Are Not Allow To Lick My Banner, Stay Away!
dragonesdenano said:
Thank you very much for the amazing help.
I did, i ve added to the kitchen.... Anyway will check all again.
Thanks again
SkyDragon© You Are Not Allow To Lick My Banner, Stay Away!
Click to expand...
Click to collapse
I hope that helped you out.
I'm adding this to the OP....
one thing I should point out....using the latest TWRP, a ROM created w/ this kitchen will not flash. You will need to replace the update-binary in \META-INF\com\google\android. See the attached file (remove the .zip).
also, you'll want to update the updater-script to replace the format /system cmd to:
format("ext4", "EMMC", "/dev/block/mmcblk0p37", "0", "/system");
Hi guys.
I've been trying to install the mighty HoloBlur but I'm unable to. I get error:
set_perm: some changes failed (status 7)
Now, I readed the updater-script and noticed a reference to a file named fixperm.sh. The line says the following:
package_extract_file("system/etc/releasetools/fixperm.sh", "/tmp/fixperm.sh");
set_perm(0, 0, 0777, "/tmp/fixperm.sh");
I looked at that directory on the .zip but didn't find the releasetools folder. Neither the fixperm.sh file.
I deleted that line and another reference to that file, and it advanced. Next I had to modify this line:
format("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
It said that I needed 5 parameters and was only giving 4. I modified it to this:
format("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "0", "/system");
And it advanced. But then, error on symlinks:
symlink: some symlinks failed
And because that error didn't specified which ones, I couldn't continue with my quest.
Anybody has an idea how to fix this? Or has a past version of HoloBlur? Original links in the thread don't work. BTW, I'm using Philz Touch 6 with CWM v6.0.4.7
Aloha community,
after 3 years of using an iphone i switched back to android with a new shiny z3 compact aka aries.
while staying in touch with android by developing apps and rooting/flashing a few phone from friends i am a bit out of ideas when it comes to my new phone...
what i did so far:
rooted phone,
backed up ta-partition
opened bootloader
installed cwm-recoverey by doomlord
tried to flash cm 12 (edited update-script to allow 'aries') -> install aborts without error message
tried to flash cm 11 -> black screen after reboot need to refresh boot.img in fast boot and restore android from backup
tried aosp 5.0.2 -> works fine but no detection of SIM, Camera, no root... i will wait for the official release from sony.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
Since i want to get rid of the whole sony bloatware (which is a pain to remove manually on the phone) and also don't want to do it every time i need to reboot + want to offer the opportunity to others to install a relatively clean rom i tried to make my own rom based on the cwm backup...
therefore i copied the boot.img from the backup + the extracted system.ext4.tar folder in a new folder.
I removed all apps i didn't want / added others
I copied the META-Inf from the DRM-resoter zip and edited the updates-script.
it now reads:
Code:
mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
ui_print(" ");
ui_print(" Deleting /system ");
ui_print(" ");
delete("/system/*");
ui_print(" ");
ui_print(" Extracting Files ");
ui_print(" ");
package_extract_dir("system", "/system");
ui_print(" ");
ui_print(" Setting Permissions ");
ui_print(" ");
set_perm_recursive(0, 0, 0755, 0644, "/system/app");
set_perm_recursive(0, 0, 0755, 0644, "/system/framework");
set_perm_recursive(0, 0, 0755, 0644, "/system/priv-app");
ui_print(" ");
ui_print(" Unmounting System ");
ui_print(" ");
unmount("/system");
ui_print("------------------------------------------");
ui_print(" Finished ");
ui_print("------------------------------------------");
i stored the folder as a zip and signed it. Now it should be a flashable rom...
when i try to install it with cwm recovery the installation aborts.
the Log says:
Code:
-- Installing: /storage/sdcard1/custom-signed.zip
Finding update package...
I: Update location: /storage/sdcard1/custom-signed.zip
Opening update package...
Installing update...
Installation aborted.
I: using /data/media for /sdacrd/0/clockworkmod/.last_install_path.
I:Can't partition non mmcblk device: /devices/msn_sdcc.2/mmc_host
can someone tell me where i did something wrong?
if anyone likes to have a look at the rom:
Code:
archy.no-ip.org/owncloud/public.php?service=files&t=bf55a79f9d9660641b115db5da352f5f
I hope you guys can help me!
Greetings
i think i could describe my problem better, updated the start post
Hi mates, I need your help, thank you!
I would use my old phone (g900v cdi11 locked bootloader) as a videosurvelliance camera, to do that I need that it can reboot automatically if battery runs out and power appears again. To do that I need to change lpm file inside /system/bin folder, switch off phone, plug the power abd check if script lpm file works, if not edit it and check again. . To do that I have these ideas:
1) flash a rooted LL rom, and use a root file manager and overwhite lpm file, is it that easy and possible?
2) Boot on safestrap (which I've already installed and accessible flashing the KK bootloader with Odin, the version is about 2.7.4, don't remember exactly) and chage from there, but the SS file manager don't see any files, probably it's running not rooted (??), maybe /system not mounted, and I don't know all the Unix command I've to type in console to edit lpm or overwrite it, or eventually with ADB.. it copied but in reality I don't know where, it's not /system/bin.
3) so I need to "flash"/install a .zip file containg the /system/bin/lpm file, but for doing this I need a script, which is actually what I'm asking here
4) Any other ideas? Please remember I have a cid11 g900v, so no root on MM, and some other complications unfortunately.
For the script I've tried to arrange from one SS installation, and I tried to save only these lines, but I'm not sure it will do the job, the idea is to create a zip file with system/bin/lpm file and META-INF/com/google/android/updater-script file:
Code:
ui_print("*************************************");
ui_print("* Change lpm *");
ui_print("*************************************");
ui_print("");
unmount("/system");
ui_print("Writing System Files");
mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
package_extract_dir("system", "/system");
set_progress(0.600000);
ui_print("Setting Permissions...");
ui_print(" ");
#PERM
set_metadata_recursive("/system/bin", "uid", 0, "gid", 2000, "dmode", 0755, "fmode", 0755, "capabilities", 0x0, "selabel", "u:object_r:system_file:s0");
ui_print("------> Done!");
unmount("/system");
ui_print(" ");
ui_print(" Installation complete ");
ui_print(" ");
ui_print(" ");
What is missing eventually?
Thank you!
By the time I solved flashing every time the whole rom (exploded, edited and repacked in Windows), boot It and wit its installation.
It still interesting to read your suggestions, thank you