[Q] Best way to move from Juwes 5.3 to Amerstis - Galaxy S I9000 Q&A, Help & Troubleshooting

Im currently on the outstanding Juwes custom 5.3 and am thinkg of trying out Amerstis 5.3
Whats the best way to do a clean install?Is there any other good rom that ud suggest . Im tempted to try aMerstis before i sellmy fone
Specs:Juwe 5.3+Semafore kernel 1.5+CWM 3.x
thanks

darkkid85 said:
Im currently on the outstanding Juwes custom 5.3 and am thinkg of trying out Amerstis 5.3
Whats the best way to do a clean install?Is there any other good rom that ud suggest . Im tempted to try aMerstis before i sellmy fone
Specs:Juwe 5.3+Semafore kernel 1.5+CWM 3.x
thanks
Click to expand...
Click to collapse
Check my post
http://forum.xda-developers.com/showthread.php?t=1142499

malcho said:
Check my post
http://forum.xda-developers.com/showthread.php?t=1142499
Click to expand...
Click to collapse
I just want to do a clean install from 1 custom to another
Ur experience about rom, has nothing that i need
Id just like to wipe the Juwes rom clean and move to amerstis

Then flash a stock rom jvr/jvs and then install the rom....
Sent from my GT-I9000 using XDA App

ali_khalid5518 said:
Then flash a stock rom jvr/jvs and then install the rom....
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I did a factory reset and now my fone is stuck on "Galaxy S Screen"
Would i just flash a stock JVQ file with repartition via odin or is there something else?

Yes go with odin repartition tick if u have 2 or more file eg pit file.
Sent from my GT-I9000 using XDA App

ali_khalid5518 said:
Yes go with odin repartition tick if u have 2 or more file eg pit file.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ali, i did not get that
Would i just flash only the pit file with repartition? Or
the whole thing(PDA,CSC,MODEM and pit) via odin
Sorry, its been a while since i flashed stock

If u have four file then select them respectively tick repartition and start odin and u ll be on stock
Sent from my GT-I9000 using XDA App

Related

I'm on MIUI and I want to go back to JL2

Hi I'm on miui and I am looking for the safest way to go back to jl2.. just wondering if I can flash the firmware from samfirmware with no pit and no repartition with Odin. Thanks in advance
Sent from my GT-I9000 using XDA Premium App
preferably you should be using a 3 file firmware with pit and re-partition if you want to go back to stock.
otherwise you may encounter some errors, due to system files / settings being kept on the phone from the MIUI ROM
Thanks... do u know where I can find a bell stock 3 file firmware?
Sent from my GT-I9000 using XDA Premium App
Jason123420 said:
Thanks... do u know where I can find a bell stock 3 file firmware?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
i have no idea, im not familiar with bell i9000, you could try www.samfirmware.com or have a look on the general section, its a sticky on the first page

[Q] what is re-partition in odin?

What is re-partition in odin? Anybody knows the exact use of re-partition? Thanks before
Sent from my GT-I9000 using XDA App
roundbelly said:
What is re-partition in odin? Anybody knows the exact use of re-partition? Thanks before
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Its basically the same concept of formatting a hard drive on your PC.
It wipes your phone's storage first before installing the new fw. Some just like gaving a "clean slate" before using a new rom...
Sent from my MB860 using xda premium
ccrows said:
Its basically the same concept of formatting a hard drive on your PC.
It wipes your phone's storage first before installing the new fw. Some just like gaving a "clean slate" before using a new rom...
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
So.. a clean install means tick re-partition box right? Thanks
Sent from my GT-I9000 using XDA App
Repartition is supposedly going to wipe all data on your phone, but it's also a death button that makes you ODIN freeze and making your phone not boot up
sadekmefti said:
Repartition is supposedly going to wipe all data on your phone, but it's also a death button that makes you ODIN freeze and making your phone not boot up
Click to expand...
Click to collapse
A death button? !!!!!!!!!!!!!!!!!!!!
roundbelly said:
What is re-partition in odin? Anybody knows the exact use of re-partition? Thanks before
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
It repartitions your filesystem. Lets say you installed CM which uses ext4, then it will re-partition it back to RFS (stock default).
so when you using stock rom you haven't to select re partition but when using custom rom with different system layout and wanna go back to stock rom you should select re-partition
Edit: guide here
http://forum.xda-developers.com/showthread.php?t=1102881
5aaled said:
A death button? !!!!!!!!!!!!!!!!!!!!
It repartitions your filesystem. Lets say you installed CM which uses ext4, then it will re-partition it back to RFS (stock default).
so when you using stock rom you haven't to select re partition but when using custom rom with another system layout and wanna go back to stock rom you should select re-partition
Click to expand...
Click to collapse
I'm actually on CM10.1, so if I want to flash a Stock ROM I must tick re-partition ?
sadekmefti said:
I'm actually on CM10.1, so if I want to flash a Stock ROM I must tick re-partition ?
Click to expand...
Click to collapse
Yes for sure, cm use different system layout .
But don't select it without PIT file
Sent from my GT-I9000 using xda app-developers app
5aaled said:
Yes for sure, cm use different system layout .
But don't select it without PIT file
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I for example I want to flash the Stock 4.1.2 XWLSD, where do I find the .PIT file ?
sadekmefti said:
I for example I want to flash the Stock 4.1.2 XWLSD, where do I find the .PIT file ?
Click to expand...
Click to collapse
Stock rom is refer to samfirmware 2.3.x
4.1.2 is costum rom you can flash with cwm
Odin used only with stock rom, flash modem, .tar kernel
Sent from my GT-I9000 using xda app-developers app
5aaled said:
Stock rom is refer to samfirmware 2.3.x
4.1.2 is costum rom you can flash with cwm
Odin used only with stock rom, flash modem, .tar kernel
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
4.1.2 XWLSD is a Sammy Stock ROM !
Nevermind, I'll not go back to Stock ROMs
Thanks
sadekmefti said:
4.1.2 XWLSD is a Sammy Stock ROM !
Nevermind, I'll not go back to Stock ROMs
Thanks
Click to expand...
Click to collapse
Which phone u r using
XWLSD is SII, right .. This is SGS thread mate
Sent from my GT-I9000 using xda app-developers app
5aaled said:
Which phone u r using
XWLSD is SII, right .. This is SGS thread mate
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Ohh I'm sorry mate, I didn't see it
Thanks for replies
sadekmefti said:
Ohh I'm sorry mate, I didn't see it
Thanks for replies
Click to expand...
Click to collapse
This is a guide for s2
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9000 using xda app-developers app

Best ROM/Kernel

Hello Galaxy S Community, I have just purchased a Galaxy S and its coming with android 2.1 stock. I wanna know, whats the fastest and most stable rom for the Galaxy S and whats the fastest and most stable kernel for the Galaxy S?
Edit: I just updated it to 2.3.3 JVN Via Samsung Kies but I am no noob with odin, i just wanted to update via kies .
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
flowerpower84 said:
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
Click to expand...
Click to collapse
I definately dont wanna stay on stock touchwiz cause i dont like the interface. What do you think about the 4.0.4 roms? Does all the hardware work or is it in alpha/beta? What about ICS Kernels? Should i flash ICS or flash a Gingerbread rom (CM7, etc)? Sorry about all the questions but there are so many roms/kernels that I just have no clue which one to use.
You could try latest CM9 nightly with Semaphore 1.2.2 or latest mnics or Devil kernel.
After 3 or 4 circle battery charges I'd think it will offer to you good performance and good battery life, but I'm supposing it.
Try them and after that tell us about
I hope it helps you!
I m using ics333 no bugs, good ram management, good battery life my first rom after buying galaxy S
Sent from my GT-I9000 using XDA
For GB, jw6+midnight kernel
Ive download slim ICS (samsung base, device essentials (i9000) and slim gapps). how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing. also.
alb3rtt said:
Ive download slim ICS as it seems to include everything i want. how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing.
Click to expand...
Click to collapse
Here is my ezodin kit, unzip, read .txt
http://db.tt/MOGZx01S
Sent from my GT-I9000 using xda premium
should i install cm9 first, then slim ics?
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Yes.
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Full instructions on slim site......see link in my sig
Sent from my GT-I9000 using xda premium
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
alb3rtt said:
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
Click to expand...
Click to collapse
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
slaphead20 said:
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
alb3rtt said:
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
Click to expand...
Click to collapse
No problem, any difficulty, just post back
Sent from my GT-I9000 using xda premium
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
alb3rtt said:
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
Click to expand...
Click to collapse
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
slaphead20 said:
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
slaphead20 said:
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
i rebooted into recovery, and pressed install zip from sd, then select update.zip.
alb3rtt said:
i rebooted into recovery, and pressed install zip from sd, then select update.zip
Click to expand...
Click to collapse
i redownloaded it and did the install procedure and it came up again. (cant open cm9 update). my cwm is cwm 3, might that be the problem? (i did everything like you ezbase guide said)

Downgrade to GB

Hello, I've looked around to find this answer but couldn't find an exact match. I want to downgrade from rocketrom ics to stock GB 2.3.6 using odin, my current. Kernel is franco. My device is checked and known to have dangerous eMMC bug. Is it completely safe to flash stock gb from rocketrom?
Sent from my GT-N7000 using xda app-developers app
Jonnyn93 said:
Hello, I've looked around to find this answer but couldn't find an exact match. I want to downgrade from rocketrom ics to stock GB 2.3.6 using odin, my current. Kernel is franco. My device is checked and known to have dangerous eMMC bug. Is it completely safe to flash stock gb from rocketrom?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes your fine to flash through odin they bug only happens if you factory reset while on a ICS kernel
Awesome, thanks man, I guess flashing back to GB will totally remove me from this emmc bug thing then?
Sent from my GT-N7000 using xda app-developers app
Jonnyn93 said:
Awesome, thanks man, I guess flashing back to GB will totally remove me from this emmc bug thing then?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
yes
good stuff, thanks man
Ics seem not so perfect yet.hope jelly bean can b perfect.i also wanna back to GB.
Sent from my GT-N7000 using xda premium
zacthespack said:
Yes your fine to flash through odin they bug only happens if you factory reset while on a ICS kernel
Click to expand...
Click to collapse
Hi guys,
Im on Stock ICS XXLQ2 can i flash stock GB XXLC1 using Odin PC after that i can do Full Wipe/Factory reset etc..
Thanks
I got the idea i need to flash the Open europe version of stock GB via odin. But the one I found is Wipe version, will this trigger the eMMC bug? (my device is affected)
mjrifath said:
Hi guys,
Im on Stock ICS XXLQ2 can i flash stock GB XXLC1 using Odin PC after that i can do Full Wipe/Factory reset etc..
Thanks
Click to expand...
Click to collapse
Yes, flash with PC Odin.
Sent from my GT-N7000 using xda premium
Jonnyn93 said:
I got the idea i need to flash the Open europe version of stock GB via odin. But the one I found is Wipe version, will this trigger the eMMC bug? (my device is affected)
Click to expand...
Click to collapse
Afaik the full wipe part will be performed under the gb kernel as that is flashed before the from, so you'll be fine.
Sent from my GT-N7000 using xda premium
Thanks bro, this site is awesome.
SpyderTracks said:
Yes, flash with PC Odin.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Is it ok just downgrading my rom from ICS to GB.. Sorry for my poor knowledge i'm new to android..
Thanks for your help.
mjrifath said:
Is it ok just downgrading my rom from ICS to GB.. Sorry for my poor knowledge i'm new to android..
Thanks for your help.
Click to expand...
Click to collapse
Yes, use PC Odin to flash, then perform a factory reset when you're on gb.
Sent from my GT-N7000 using xda premium
Sorry but i need to clarify this
So, is it ok to flash any rom with safe kernel? For instance CM9 RC1? I'm on official ics 4.0.3 from samsung, and like most of the note users i have the f*ing bug
the_imp_rules said:
So, is it ok to flash any rom with safe kernel? For instance CM9 RC1? I'm on official ics 4.0.3 from samsung, and like most of the note users i have the f*ing bug
Click to expand...
Click to collapse
Cm kernels will not work with tw based roms, only with aokp/aosp, and vice versa. You'll have to read up on the kernel pages themselves on which rom types they support.
So flash to gb first, perform full wipe, root and install cwm, then you can install custom kernels and roms from there. Never install from ics kernel, only downgrade to gb to be safe.
Sent from my GT-N7000 using xda premium
Thanks
Downgrading to gb means; directly flashing a gb rom right? Yes, i'm new to all this.
the_imp_rules said:
Downgrading to gb means; directly flashing a gb rom right? Yes, i'm new to all this.
Click to expand...
Click to collapse
Yes, flash with PC Odin.
Sent from my GT-N7000 using xda premium
hi everybody
i am sorry for bothering you i just want to ask when using pc odin to downgrade from ics to gb stock rom is enough one pda file or i had to use the other phone and csc file with pit file and repartition, that is my first question.
the second one after flashing the stock gb can stay on stock kernel or it is unsafe.
thank you in advance
iraqi4ever80 said:
hi everybody
i am sorry for bothering you i just want to ask when using pc odin to downgrade from ics to gb stock rom is enough one pda file or i had to use the other phone and csc file with pit file and repartition, that is my first question.
the second one after flashing the stock gb can stay on stock kernel or it is unsafe.
thank you in advance
Click to expand...
Click to collapse
Most of the rom files split down into three files but If you place the original tar file into pda, odin sorts out the partitions correctly for you.
All stock gb kernels are safe from emmc superbrick bug, safe to perform wipes.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Most of the rom files split down into three files but If you place the original tar file into pda, odin sorts out the partitions correctly for you.
All stock gb kernels are safe from emmc superbrick bug, safe to perform wipes.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your rapid response:laugh: this issue made me confused because every rom of middle east i downloaded made from one file i didnt how to bring the other files but now i will do downgrade flash using one pda file which i was afraid to do it before your help

Installing an ICS Rom from a Gingerbread Rom

Do I need to flash new bootloaders going from a gingerbread Rom to a ICS Rom???
Nope.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Nope.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks 4-2,
Second question......Do I need to go back to stock gingerbread before flashing 4.0.4 - ICS - AoCP CP 2.1 - The Collective or can I flash over top after wiping davlik and cache , partitions???
Im running Mosiac XI now
U should be able to just follow the install instructions in the OP of the ICS 4.0.4 AoCP CP 2.1 Rom and be good to go. (This is an excellent ICS Rom by the Collective, btw.)
...U could flash back to Stock KK4 if u want the i897 GB Bootloaders...since u may have i9000 GB Bootloaders being on Mosaic IX ?? Up to u though.
Sent from my SAMSUNG-SGH-I897 using xda premium
4-2ndtwin said:
U should be able to just follow the install instructions in the OP of the ICS 4.0.4 AoCP CP 2.1 Rom and be good to go. (This is an excellent ICS Rom by the Collective, btw.)
...U could flash back to Stock KK4 if u want the i897 GB Bootloaders...since u may have i9000 GB Bootloaders being on Mosaic IX ?? Up to u though.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Again many Thanks 4-2, I figured Id give the collective first shot with ICS since Mosaic was one of the best Roms Ive flashed.
Guess I'll be flashing it tomorrow.
Good call !! :thumbup:
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Good call !! :thumbup:
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Ok , flash failed....Status 7 error. Any Ideas???
^
Not sure why u got that error. No one has reported that in the AoCP CP 2.1 ICS 4.0.4 thread.
From reading around, it has something to do with the updater script etc.
Anyway, i suggest u do two things. Get into the cwm recovery u have now and then mount usb and copy a fresh download of the Rom to ur phone. Then copy this kernel.zip that is just the kernel from CP 2.1 release...posted here--- http://forum.xda-developers.com/showthread.php?p=30523384 . Install that kernel through ur current cwm 1st. Then reboot to that cwm recovery and flash the rom again. Be sure to do the wipes etc. that r posted in that Roms OP.
And be sure to eject ur phone from the pc the correct way...see this post... http://forum.xda-developers.com/showthread.php?p=29998391.
edit: search "status 7 error" in the Search This Forum tab of this Q & A Forum...search Show Posts. There u will find a lot of helpful info.
Sent from my SAMSUNG-SGH-I897 using xda premium
kdp162 said:
Ok , flash failed....Status 7 error. Any Ideas???
Click to expand...
Click to collapse
See this post by crt60... http://forum.xda-developers.com/showthread.php?p=30595832
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
See this post by crt60... http://forum.xda-developers.com/showthread.php?p=30595832
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Ok, downloaded the new kernel and redid the wipes and flashed the rom again , then reflashed just for good measure. Rebooted and it went right back to revovery and does every time I rebooted. Tried flashing back to Mosaic but that flash failed Staus 0 message. So after playing with it a while I decided to flash another Rom. Again , did all the wipes and flashed HellyBean ....Rebooted right back to recovery again , I'm at a loss...Anyone??? And yes I thought about using odin and going back to stock but Odin won't recognize my phone...Windows does , ADB does but not Odin
When initially going to an ICS Rom from a Stock Rom u will have to flash it twice. First from the cwm that u had from where u started and then second from the next cwm recovery that loads. ---- So when the recovery boots back, just select to install the Rom again. ---- It should load the Rom on that second install.
Sent from my SAMSUNG-SGH-I777 using xda premium
kdp162 said:
Ok, downloaded the new kernel and redid the wipes and flashed the rom again , then reflashed just for good measure. Rebooted and it went right back to revovery and does every time I rebooted. Tried flashing back to Mosaic but that flash failed Staus 0 message. So after playing with it a while I decided to flash another Rom. Again , did all the wipes and flashed HellyBean ....Rebooted right back to recovery again , I'm at a loss...Anyone??? And yes I thought about using odin and going back to stock but Odin won't recognize my phone...Windows does , ADB does but not Odin
Click to expand...
Click to collapse
Ok, after playing with it it I finally got into download mode , used Odin to flash back to stock 2,5 then rooted and flashed the Rom . Installed perfectly and is running great......Thanks for all the help ....much appreciated.

Categories

Resources