[Q] galaxy i9000 looping at bootup.. not getting past the glowing S - Galaxy S I9000 Q&A, Help & Troubleshooting

I have recently flashed the JVS firmware from samsung firmware, and then followed that up with this CF-Root-XX_OXA_JVS-v4.1-CWM3RFS, flashing via the PDA section in ODIN. My phone has been working perfectly for a few days, no problems at all, until right now when I've gone to restart the phone.. I was having troubles with the market, and I turned my phone off mid-download of an app.. I'm pretty sure it was mid-download and not mid-installation of it..
However, when I turn my phone back on, it'll show the Galaxy S I9000 screen, then go to the next screen with the glowing S, however after that, it just gives a quick, short vibration, and seems to turn off, then do it all over again..
What does this mean? Is there a way I can get out of it without re-flashing the entire firmware? I am still able to get into download mode, but I don't want to lose messages that I have saved on my phone..
Any help is greatly appreciated..
Denno

Ok, so I let the phone go for a while (around 10 minutes), of the screens cycling through as mentioned above, but now it seems to have actually found a way into the phone, and has now loaded up properly.. However, I'm still interested in what the problem could be on the phone??

are u using new market app?
its happened to me once and i reflashed whole firmware starting from 2.1 to 2.3.5 lol just to avoid sh*t like that

When I had 2.2 on there, I had the new market app, however after flashing 2.3.5, it had the old market, so I was downloading apps from the old market at the time..
What do you mean you re-flashed whole firmware from 2.1?

Anyone else have any ideas?

Try to wipe factory reset and wipe cache or try to flash rom again
Wysłano z GT-I9000 z użyciem Tapatalk

Could be a corruption in the bootloader, if it happens again i would reflash. Otherwise just leave it i guess, maybe it was a one off

It happens pretty much all the time now.. I have reflashed the firmware a couple of times.. And it still seems to happen. What would wiping the cache remove? Will I lose any settings or anything that I have on the phone? I have been restoring backups made using titanium, however just apps and data, not system settings..
If it's the bootloader, is there any way of fixing that?
Thanks

Ah that could be the problem. Sometimes when you restore backup they can conflict and thus cause issues like this...
Try only return the data, that works for me. Get app list from the market and after a backup move to external sd. Format internal sd card. Then do an Odin flash with repartition checked. This is designed to get you back to factory state, so you will loose everything. Make sure your backups are not on your internal sd when you format. Also before you flash i think its a good idea to put a copy of your nandroid backup into the internal sd. Or just use a nandroid backup from when you phone was working fine.
Deleting cache does not delete your settings usually, however when deleting dalvick cache it can take up to 30 mins (max i think) to start you phone, but usually its 5/10 mins.
Yes bootloader can be fixed just find a flashable bootloader with a rom or the directions given. Use search for this

Ok thanks for the tips Talon.. Firstly, this nandroid backup that I keep hearing about.. What exactly is that? Is that the backup that I do through Clockwork Mod Recovery? I'm also unsure how to return just the data to apps? I had a look at Titanium Backup, and the only data recovery option is for system data.. Everything else I think I can handle..
Thanks

Yes nandroid backup is the backup through CWM. You should always do one BEFORE you flash anything on your phone. And keep them in a safe place and leave one in your internal sd card.
You should use titanium backup to backup up a single app at a time, not batch. This way you'll have more files and can choose which apps you want to return, and if you only want to return the data. (I have always done it this way, so i dont know if you can pick the apps you want to return if you do backup via batch.). Use the other app i suggested to keep the market links, so you download the app from market first then you install the data once its there.
I suggest you don't return any apps at first see how it goes, then add either a couple or one at a time, again only the app data. (Once you backuo the app individually, flash then, TB, backup/restore press on the app, restore, then pick data only...) If you go from froyo to GB i think you cant do it)

Thank you very much for your reply Talon. I am currently on JVS, and plan to re-flash this exact same firmware, which is the stock firmware, nothing custom..
As for what you've written, it's going to take me a few reads before I can get my head around it, but I just wanted to say thankyou for a quick and detailed reply. I think I might just bite the bullet and figure out which apps I actually use, and just work with them for now..
I'll post back soon hopefully with results.

After getting very frustrated with the phone, I've finally re-flashed back to a seemingly stock situation. Phone is running great, and all problems seem to be gone. Slowly re-downloading apps from the market as I feel that I need them, so I hopefully won't get any interference from the old backups I had..
One more question, how do you make your backups? If you say you don't use the batch mode in Titanium? I can't see any other way that's as easy..
Thanks for your help Talon.

As i said before, backup/restore click on the app you want to back up, and click backup. When you want to restore it, back to the menu, click on the app, click restore, then pick data only longer but safer
Change the location of TB to your exsd if you haven't already, then go to setting find, and it will make it default location

Ahk.. Sounds very time consuming.. lol..
Phone is running like a champ now . Thanks

Related

[Q] HTC HERO(cdma) HELP!

Okay i have a sprint cdma hero i sm running 2.1 sense. I started out wanting froyo i knew i had to root so i did with universal androot and then got rom manager i didn't partition sd card because i thought it wasn't needed i still dont know if it is? but anyway after that i rooted the phone then went into rom manager, made a clockwork backup then I did what i was suposed to too root it then it was about to boot up and instead of froyo it was back to sense and had restored to factory. I repeated the same thing multiple times and tried different roms it still didn't work. After all this i restored my phone and its back to normal but google "can't establish sever connection" so mail, market, talk and all that does not work! I dont know what to do. I have tried hard reset, clearing data, cache, force stop, adding another account, signing out of talk and going back in and nothing has worked. and now in my notification bar it says sign in error! with my google name and then if i touch that it will bring me to a sign in screen, i enter the password but nothing works. I dont know what i should do help! by the way I live in america, internet works, phone calls work, sms works just not google apps, I have sprint to. And if there is any way you could help me root and run froyo the easitest way please help. I am kind of new at all this.
Thanks again- Luke
Did you make a nandroid backup? If so, restore the phone. I am pretty new to this too but maybe you can try to flash the google apps, you can find the zip on here with a search.
Did you do "wipe all data" before installing? You have to do that.
Make sure you also "nandroid" and make a backup in case you need to restore.
Ok put the cm6 rom on your sd and also google gaps .
make a nanidroid back up then wipe your phone then flash the rom then the google gaps. Then reboot
i did make a clockwork mod backup and restored my phone to that that is how it is the way know i will try and get google apps and reinstall them and if that works i will do the cm6 rom but where should i get it and do i need to partition sd card? thanks

[Q] Questions from someone on the verge of Flashing (Cognition 3.02)

Hey all,
So I'm am effing fed UP with Samsung. My Captivate is a hardware powerhouse, and with the stock Eclair firmware and all their bloatware, it's laggy, bogged down, and just not the device I wish it was. And with the talks that the Galaxy S phones are virtually unbrickable, I have decided to seriously consider ROOTing my phone and flashing the Cognition 3.02 ROM. I have watched a lot of videos, done my research, but I still have a few lingering questions for those of you out there who have recently flashed this ROM, preferably for those of you that this is the first or near-first ROM you've flashed. I know how the process works, but some specifics are bugging me and holding me back.
Ok, so I've listed some of my major questions below. Feel free to answer some or all of them if you've got the time, or DM me if that's easier. lf I think of any other Qs I have I'll post them in subsequent replies.
1. First and foremost, what process did you use to root and flash cognition on your Captivate? I've been looking at the MobileTechVideos three part tutorial on youtube which most people seem to recommend. Is this what you used? Was it as easy as simply following the instructions word-for-word? Did you run into any problems along the way?
2. I know to use Titanium Backup to backup my apps and stuff, but I've read a lot of places that I should only use it to restore those apps, and not to backup and restore user data like settings and contacts. How did you do it? My major concerns are about my contacts/phone book, which I have synced to my google account, but I also have syncs to my facebook and twitter accounts, and my phonebook is nicely linked and everything across all three. I'm afraid to forfeit this organization, so I just want to know that I'll be able to get everything back the way it was without too much trouble. I know you can export your contacts to your SD cards, and I could presumably import them from their after flashing, but I just want to be clear on how that all works.
3. Do you use your phone as a digital music player? I do, and I use iSyncr to sync it to my iTunes. If you do as well, did flashing screw any of this up? Playlists, etc? Will I need to re-sync or will it all be there once the phone scans my external SD (which wont be wiped since I'll remove it beforehand)?
4. In your first few days of use, what are the biggest improvements you see in the Cognition ROM as far as daily use is concerned over the stock firmware? Any problems you've come across? What's the selling points here, in layman's terms.
5. Do you have any regrets about flashing?
Thanks guys, and any other advice you think would be helpful that wouldn't come under any of the questions would also be GREATLY appreciated.
4. No problems for me. Phone is smoother and faster now.
5. Not at all.
Sent from my SAMSUNG-SGH-I897 using XDA App
1. manually rooting is overrated. most, if not all, custom roms automatically root your phone for you, so there really is no need for you to do it yourself. except the first time: root your phone using the one click since it's simple, grab rom manager from the market and use it to download an update.zip containing clockworkmod recovery for the captivate and leave that update.zip on your phone and never change it or delete it. it makes flashing new roms so much easier and there is really no need to ever remove or change it. boot into recovery, reinstall packages twice, install zip from sd card, and pick your rom. also, you will never need to use rom manager again unless you lose that update.zip.
2. I use titanium backup in batch mode (hit the menu softkey and hit batch). click backup all user apps and system data, but uncheck everything that is in red text, therefore backing up only things in green text (useful system settings, contacts, calendar, messages, etc) and white text (user installed apps). then run batch operation. install new rom, use batch to restore all missing apps and system data. to re-backup newer settings, app data, or updated apps, use backup all new apps and newer versions, and then either redo old backups or forced redo of all backups.
3. yes, but I just copy and paste my music files over instead of syncing them. also your internal sd is never wiped unless you use master clear on odin, which I have never done, nor do i ever wish to, because in my opinion there is no reason to. therefore both your playlists and your music would not be wiped whether you put them on the internal or external sd. (unless of course, you decide to use master clear)
4 & 5. I agree with faroid.
Be sure you have the correct odin set up and recognizing your phone on your pc. Eventually you will need to use it for one reason or another. The most common is the odin3 one click jf6 but some newer builds cannot be flashed to firmware older than jh2.
1. To root i use one click root/ unroot vary simple plug in and press root then install clockwork recovery from the market its free with clockwork recovery you can flash your cognition
Sent from my SAMSUNG-SGH-I897 using XDA App
4. The best thing is froyo 2.2 then lagfixes and overclocking
5.no regrets, expect when i bricked my phone but the jig method fixed that
Sent from my SAMSUNG-SGH-I897 using XDA App
yokozuna82 said:
4. The best thing is froyo 2.2 then lagfixes and overclocking
5.no regrets, expect when i bricked my phone but the jig method fixed that
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Did you use the full MobileTechVideos method when your phone got bricked? Or did you flash without reflashing to stock and wiping everything?
newter55 said:
Be sure you have the correct odin set up and recognizing your phone on your pc. Eventually you will need to use it for one reason or another. The most common is the odin3 one click jf6 but some newer builds cannot be flashed to firmware older than jh2.
Click to expand...
Click to collapse
So how do I know which one I should use? Is it based on the ROM I flash, or my hardware (Captivate)?
Which odin stock firmware is based on the build (four digit number under battery such as 1006) and what version your phone came with when new, such as jf6 or jh7.
newter55 said:
Which odin stock firmware is based on the build (four digit number under battery such as 1006) and what version your phone came with when new, such as jf6 or jh7.
Click to expand...
Click to collapse
Do you by chance know which one I'd need off hand? I'm at work and don't feel like pulling my phone apart, but I can tell you that I bought my Captivate the day it came out, so presumably it came with the oldest firmware the Captivate ever came packaged with.
1. No need to root. That's an extra step you don't need. My method, get the update.zip for clockwork mod, just search the Dev section, no need to even install Rom Manager or anything. Take that update.zip and put it on the root of your internal SDcard (just the normal phone storage, not an external SD. Then using adb or button method reboot into recovery, choose reinstall packages. The phone reboots into stock recovery. Choose reinstall packages again and this time you get Clockwork. Wipe data, install zip from SD, choose zip file, pick Cog, install and done.
2. I use titanium for user apps only, ie, things I got from market. All my contacts are synced with google, so once I add my google info under accounts they are back. Sorry, i don't mess with facebook or twitter so i can't answer that. As far as settings, you just have to manually do that, ie, ringtones, wireless networks, etc.
3. Yes I do. And I also use iSyncr. No problems whatsoever. As long as you don't do a MasterClear. That option under Odin will wipe your internal SDcard also. The Wipe Data under Clockwork recovery just wipes out installed apps and settings but leaves your internal SD intact.
4. Honestly, it's just a much better experience overall. The phone is faster, smoother, and more responsive. Plus DG has taken the liberty of removing all the ATT crap and un-needed apps.
5. Not one.
My only advice would be to "be prepared". My sure you have button recovery available ahead of time. Check your Rev version of phone, ie, the date under the battery. It seems newer Revs require a different version of stock Odin One-click. Some people have had issues running the original One-click. If you have any doubts about your phones ability to go to download mode, in case you need to go back to stock, spend the $1 on building a USB Jig.
You will find that flashing is easy. Recovering from unexpected errors can be easy if you are prepared.
bobbylx said:
1. No need to root. That's an extra step you don't need. My method, get the update.zip for clockwork mod, just search the Dev section, no need to even install Rom Manager or anything. Take that update.zip and put it on the root of your internal SDcard (just the normal phone storage, not an external SD. Then using adb or button method reboot into recovery, choose reinstall packages. The phone reboots into stock recovery. Choose reinstall packages again and this time you get Clockwork. Wipe data, install zip from SD, choose zip file, pick Cog, install and done.
2. I use titanium for user apps only, ie, things I got from market. All my contacts are synced with google, so once I add my google info under accounts they are back. Sorry, i don't mess with facebook or twitter so i can't answer that. As far as settings, you just have to manually do that, ie, ringtones, wireless networks, etc.
3. Yes I do. And I also use iSyncr. No problems whatsoever. As long as you don't do a MasterClear. That option under Odin will wipe your internal SDcard also. The Wipe Data under Clockwork recovery just wipes out installed apps and settings but leaves your internal SD intact.
4. Honestly, it's just a much better experience overall. The phone is faster, smoother, and more responsive. Plus DG has taken the liberty of removing all the ATT crap and un-needed apps.
5. Not one.
My only advice would be to "be prepared". My sure you have button recovery available ahead of time. Check your Rev version of phone, ie, the date under the battery. It seems newer Revs require a different version of stock Odin One-click. Some people have had issues running the original One-click. If you have any doubts about your phones ability to go to download mode, in case you need to go back to stock, spend the $1 on building a USB Jig.
You will find that flashing is easy. Recovering from unexpected errors can be easy if you are prepared.
Click to expand...
Click to collapse
So do I not need to be rooted to use Ti-BU? I thought I saw that under the product description in the marketplace.
Also, under #1, when you say "Wipe Data" you are referring to an option in the Clockwork Recovery menu, not an Odin MasterClear, right? Will this wipe my internal SD?
If you got the phone on release you likely have a 1006 build with working 3 button recovery and can safely use the odin3 one click jf6.
Sent from my Liquid Metal using XDA App
TiBu needs root. I rooted using one click, then backed up user apps and data (used built in contact export to save contacts and smsbackup for texts).
Then I just ran the update.zip for CWR and flashed Cog - was my first flash too and pretty painless. TiBu returns your apps as if you never changed them.
Make sure you can access recovery and dl mode though.
GerStud101 said:
So do I not need to be rooted to use Ti-BU? I thought I saw that under the product description in the marketplace.
Also, under #1, when you say "Wipe Data" you are referring to an option in the Clockwork Recovery menu, not an Odin MasterClear, right? Will this wipe my internal SD?
Click to expand...
Click to collapse
Sorry, forgot you would want to backup before installing a new ROM. Yes, to use Tibu on your current ROM you will need root.
As for wipe data, yes it's a clockwork option. Like I said in #3 wipe data just removes user installed apps, and changes all settings to stock, but all data on your internal store will stay there, pics, music, etc.
Master Clear is the Odin option, which I never use by the way, that will completely delete everything on your internal SD, bye bye music, pics, etc.
This is all EXTREMELY helpful by the way.
Quick question about USB Jigs--is it easy to build one myself or should I splurge on the ~$15 one MobileTechVideos sells? There's seems pretty fancy, and I can't afford to be phoneless as I putz around trying to jimmy myself a jig.
I can't speak from experience but there's a thread here in QA that makes it seem easy. Just get 3 x 100kohm resistors, wire them in series, twist it to look like a horseshoe, there you go. If you have a radioshack or other electronics store near you it's worth a shot. Like I said, I think all 3 resistors cost may $1 total. You can also test it on your phone to make sure. Touch the jig to the 2 leads, if it goes into download mode instantly you did it right. Pull battery and reboot and all is well.
Edit. Jig link,
http://forum.xda-developers.com/showthread.php?t=889128
bobbylx said:
I can't speak from experience but there's a thread here in QA that makes it seem easy. Just get 3 x 100kohm resistors, wire them in series, twist it to look like a horseshoe, there you go. If you have a radioshack or other electronics store near you it's worth a shot. Like I said, I think all 3 resistors cost may $1 total. You can also test it on your phone to make sure. Touch the jig to the 2 leads, if it goes into download mode instantly you did it right. Pull battery and reboot and all is well.
Click to expand...
Click to collapse
Yeah I saw that thread, I'll have to try my hand at it before I do this process. Better safe than sorry. Thanks.
Ok, so, the plan = build working jig and DL proper Odin just in case, one-click root, Ti-BU, move clockwork update.zip and cognition zips to my root folder, reboot in recovery, reinstall packages/flash clockwork, then wipe and flash cognition. This sound correct?
That sounds about right. Really the only thing different i do is on the root of my storage I create folders for ROMs. So I have a Cog folder with the rom in it. Once you have Clockwork installed and you are choosing to flash, it will let you navigate to different folders. That's just my preference because I don't like to have too many individual files on my SD. Minor thing, just thought I would mention it.
bobbylx said:
That sounds about right. Really the only thing different i do is on the root of my storage I create folders for ROMs. So I have a Cog folder with the rom in it. Once you have Clockwork installed and you are choosing to flash, it will let you navigate to different folders. That's just my preference because I don't like to have too many individual files on my SD. Minor thing, just thought I would mention it.
Click to expand...
Click to collapse
Haha, appreciate the advice; I like a little organization in my life as well.
Sounds like you've flashed a few different ROMs. Have you ever bricked your phone to the point where you needed a jig? Or has it always been smooth sailing?
I guess I'm just trying to figure out why one person's phone would brick and anothers wouldnt. It kind of makes me assume that if you brick your phone, you've done something wrong, and if you just do the process right, everything should go smoothly. But maybe that's naive of me.

Flashing over a rom?

So im wondering, what is the standard practise, or based on your own experiences. What is the best way to flash over an existing rom using CWM? What do you do to prepare the fone for new rom, wipe user data, dalvik cache, before or after flashing. Just trying to get a good idea of how to do it.
Sent from my SAMSUNG-SGH-I897 using XDA App
going from rom to rom:
put rom.zip on /sdcard/
reboot to recovery
install zip from sdcard
point to rom.zip
flash
reboot
any rom that has been properly done will wipe user data and dalvik cache for you. no need to do it manually
i always flash back to eclair and master clear with odin one click to make sure all files from previous roms are gone then CWM flash new ROM
Pirateghost said:
going from rom to rom:
put rom.zip on /sdcard/
reboot to recovery
install zip from sdcard
point to rom.zip
flash
reboot
any rom that has been properly done will wipe user data and dalvik cache for you. no need to do it manually
Click to expand...
Click to collapse
+1
Except I do clear the caches manually, but that's just because I have OCD.
CremeFraiche said:
i always flash back to eclair and master clear with odin one click to make sure all files from previous roms are gone then CWM flash new ROM
Click to expand...
Click to collapse
lets look at the master clear function shall we?
when you flash to stock...your entire / is stock (RFS, eclair 2.1, /data /system, etc)
essentially, you have just reformatted your root, think of it like formatting your C drive and your sdcard is like a secondary internal drive that contains storage
master clear at this point will only delete items off your /sdcard
roms dont care about your /sdcard, master clear is worthless when you are stock
there was a time where it was necessary to flash to stock to reset the filesystem and then flash the rom. it has not been needed in months, but it continues to get preached as gospel.
even flashing to stock isnt necessary unless you are trying to come from CM7 or MIUI....or if something goes horribly wrong
Thx for info guys, I have flashed a few times and it seemed like now and then my fone must became bogged down and needed to be fully wiped, sound didnt work or lagfix folders bunch of text docs, just seemed cluttered. So if wanted to really clear out junk what would be a good way without having to flash back to stock?
Sent from my SAMSUNG-SGH-I897 using XDA App
Just flash. If you have a problem then back to stock Ans a MC. I have flashed hundreds of time back to stock once.
Sent from my SGH-I897 using XDA Premium App
Pirateghost said:
lets look at the master clear function shall we?
when you flash to stock...your entire / is stock (RFS, eclair 2.1, /data /system, etc)
essentially, you have just reformatted your root, think of it like formatting your C drive and your sdcard is like a secondary internal drive that contains storage
master clear at this point will only delete items off your /sdcard
roms dont care about your /sdcard, master clear is worthless when you are stock
there was a time where it was necessary to flash to stock to reset the filesystem and then flash the rom. it has not been needed in months, but it continues to get preached as gospel.
even flashing to stock isnt necessary unless you are trying to come from CM7 or MIUI....or if something goes horribly wrong
Click to expand...
Click to collapse
I would definitely agree. I have also seen people say to disable lagfix before flashing. I have not done that either and never had any problem.
Would just like to amend the advice already given with the following:
Pre-flashing:
1. Titanium Backup of apps and data
2. Nandroid backup in case something goes boom.
Post-flashing (assuming success):
TB restore of user apps/data only. NEVER RESTORE SYSTEM FILES.
They may not apply to some people, but I feel those are necessary steps for anyone that actually uses their phone daily.
modest_mandroid said:
Would just like to amend the advice already given with the following:
Pre-flashing:
1. Titanium Backup of apps and data
2. Nandroid backup in case something goes boom.
Post-flashing (assuming success):
TB restore of user apps/data only. NEVER RESTORE SYSTEM FILES.
They may not apply to some people, but I feel those are necessary steps for anyone that actually uses their phone daily.
Click to expand...
Click to collapse
why not restore system files? Does this apply if coming from flashing back to stock first, or just flashing from one rom to another?
Glad to hear the advice about not flashing back to stock, that's been one of the major reasons I haven't flashed quite as many rom's as I want, too time consuming.........not to say that i'm not flashing a couple rom's a week, but there's just so many options to try
neophile said:
why not restore system files? Does this apply if coming from flashing back to stock first, or just flashing from one rom to another?
Click to expand...
Click to collapse
Making "search" a standard practice would be very helpful.
Restoring system is known to mess up ROMs in all cases. Though may not be mandatory, but make it a standard practice to flash stock. Takes hardly 10 mins, and helps save big headaches later.
neophile said:
why not restore system files? Does this apply if coming from flashing back to stock first, or just flashing from one rom to another?
Click to expand...
Click to collapse
Incompatibilities across rom versions, mostly. As the guy above me said, restoring system files tends to mess up a rom because you are overwriting part of it with files from a different rom.
There is one caveat, however. If you're flashing back to a rom you originally performed the backup on, you can safely restore system files. For example, if you were running Cog 4.3 and did a full TB backup, then decided to flash Serendipity 6.3, you would want to restore only your user apps and user data. However, if you decided to flash back to Cog 4.3 at some point, you could do a full TB restore without worrying about incompatibilities.
I agree with everyone else. Flashing over another rom seldom causes issues. I make s nandroid backup of my favorite rom with everything setup the way i like it. then flash away trying different roms. When i am done, i just restore my backup and all is good!
I have done a search, couldn't find the specific answer I needed, hence my asking. Could be I wasn't phrasing the search correctly......but here I am.....
To clarify, what do you dpo to get your system settings back after flashing a new rom? I flashed to serendipty 6.4 last night, as per the advice, I didn't restore system files, just apps and data, but that didn't work so well for me. I lost my data connection, could only use my wifi, and had no contacts, or any sms msgs. I don't know what else was missing, but I then went and restored system files, everything came back as needed, and there seems to be no issue......
How do I get my info setting back, or do I just need to manually re-set everything after flashing? Apart from wireless info, msgs and contacts, what else do you lose by not restoring?
Appreciate your help
havent flashed a new rom in a while and forgot if anything extra was needed when flashing a rom over a rom
thx!

[Q] Apps are crashing after flash, including Titanium

Hey folks. I'm trying really hard to get my Captivate up and running on 2.3
Here's what's going on: I was running Firefly 3.0 and decided I wanted the Rogers Gingerbread release. I flashed to stock, and upgraded to 2.2 and then 2.3 on Kies.
At this point I thought I just didn't have data because everything was crashing, so I retried flashing.
Now I have a stock 2.1, and I realized at that point that I needed to set my APN. Now I have full internet access, but a lot of my apps are still crashing.
My other issue is that no matter what I seem to try anymore, I can't get Kies to upgrade the phone or identify it's current firmware.
I believe I'm missing a component or using an incompatible component in the flash process, and although I've looked around, all accounts seem to indicate I'm using the proper methods/files.
Any thoughts would be appreciated and I'd be happy to report any requested info I can provide.
One thing to note is that I haven't tried the Master Clear function on OneClick, basically out of reservation. I'm wondering if I try that first and then move through the rest of the steps, would that clear out whatever is causing this?
JavaMac said:
One thing to note is that I haven't tried the Master Clear function on OneClick, basically out of reservation. I'm wondering if I try that first and then move through the rest of the steps, would that clear out whatever is causing this?
Click to expand...
Click to collapse
Normally when I make a major ROM change, I'll flash to stock JF6, and then Master clear. Master Clear will erase EVERYTHING on your internal SD, because just a FTS will leave items from your previous installation which can cause conflicts(which is what I suspect is happening for you).
Just make sure you have backed up anything you want to keep on a external SD or on your desktop. Another thing to note, is to be careful not to restore Data in TiBu when setting back up
I'm thinking you're probably right on with that suggestion. It's been a concern of mine though that I'll lose more than personal data if I clear it out. Is this the case, or is Master Clear just going to delete any non-important junk including music, etc?
JavaMac said:
I'm thinking you're probably right on with that suggestion. It's been a concern of mine though that I'll lose more than personal data if I clear it out. Is this the case, or is Master Clear just going to delete any non-important junk including music, etc?
Click to expand...
Click to collapse
master clear will basically FORMAT the internal SDCard....
it is not necessary to do between rom flashes
it sounds like you just need to do a factory reset (try the factory reset within the settings menu)

[Q] How do I restore Note post an upgrade?

Hi all,
I've been a long time lurker and not had any reason to post until now as I've found most answers by reading...
The last update I did LA1, wiped data and apps and I spent ages re doing them.I was aware of this and prepared to put the time in to restore my GNote.
I now have a rooted phone and it is set up just as I like it. I have backed it up with Titanium Backup, and have Titanium Restore app. as well as CMW
I would love to try LA4 however am dreading the full wipe scenario: with downloading apps, loosing data and seting up home screens as I like them again. It can be done but very time consuming.
My Question is: Will Titanium Backup/Restore and/or CMW put my phone back to where it was prior to firmware update, with home screens, APN, E-Mails as it was but with a phone that now has new firmware?
OR: Do I need to reconfigure the home screens, font, etc. post firmware update?
LA4 is non wipe version, you won't lose your data.
For information just, Titanium backup can restore your data like bookmark, settings(fonts sound country etc), homescreen shortcut (no widgets n folder) as well all user application with data.
Home Folder can be restore with Mybackup Pro.
It is not advisable to restore system data(you will see red coloured in TB) to avoid mess up new firmware.
Great, will give LA4 a go then.
I assume ICS will be a full wipe.
Can I use Mybackup Pro to get my GNote back to the way I like it?
Or do I need to re download all my apps and reconfigure all the home screens?
Thanks for the quick reply
i wold have thought that ICS would be a full wipe but apparently someone said that on a different handset it wasnt a wipe and just upgraded over the top
Richard.p said:
Great, will give LA4 a go then.
I assume ICS will be a full wipe.
Can I use Mybackup Pro to get my GNote back to the way I like it?
Or do I need to re download all my apps and reconfigure all the home screens?
Thanks for the quick reply
Click to expand...
Click to collapse
Desktop Folder can be restored with Mybackup Pro only. Rest of the things you can do with either TB/Mybackup.
Widgets you need to configure manually. niether can do that(android OS limitation)
Some complex widgets have options to save configurations, so if you do this, and then backup app data, you should be able to restore it on the other side.
I have had odd problems in the past with backing up and restoring apps after updating the system, so I have just made up my mind to do it manually every time. I almost find it fun now because I always try something different than before. It is time consuming, but I learn a lot about how I can best use my devices this way. My 'must have' list of apps stays pretty streamlined because of this.
Richy99 said:
i wold have thought that ICS would be a full wipe but apparently someone said that on a different handset it wasnt a wipe and just upgraded over the top
Click to expand...
Click to collapse
Full wipe or not, I would still do it. No better way to introduce phantom issues than by leaving remnants of other systems on your device. LA1 to LA4 is not going to matter much IMO, but GB to ICS...I wouldn't trust the install to catch everything.
Thanks for all the info......
beestee said:
Full wipe or not, I would still do it. No better way to introduce phantom issues than by leaving remnants of other systems on your device. LA1 to LA4 is not going to matter much IMO, but GB to ICS...I wouldn't trust the install to catch everything.
Click to expand...
Click to collapse
I will probably be doing a full wipe for ICS, as Beestee says, less chance of problems.
Will give LA4 a go if nothing else good practice for upgrade technique...
May also try a few costum ROMs as well......
dr.ketan said:
LA4 is non wipe version, you won't lose your data.
For information just, Titanium backup can restore your data like bookmark, settings(fonts sound country etc), homescreen shortcut (no widgets n folder) as well all user application with data.
Home Folder can be restore with Mybackup Pro.
It is not advisable to restore system data(you will see red coloured in TB) to avoid mess up new firmware.
Click to expand...
Click to collapse
Yeah this is right. When i flash a new rom i clear data & cache in cwm and then flash the rom, install titanium backup and resore and it puts everything as it was, with two exceptions as far as ive found. Bluetooth is not set to visible as it was before and it doesnt set my wallpaper, takes 30 seconds to sort out so apart from that its fantastic, i was surprised at how flawless it does it.
I have another question:
Iam using ClockworkMod recovery to make a full backup to my phone (HTC) so I can restore my phone back as it was before installing a custom rom I did not like or when I messed up with system file etc etc,
I can not do that with my rooted Note!!! I can not find backup and restore options in my ClockworkMod recovery!!!
What version of CWM are you using? I'm using 5.0.7 (or similar, dont remember) and i can do backups
Army92 said:
What version of CWM are you using? I'm using 5.0.7 (or similar, dont remember) and i can do backups
Click to expand...
Click to collapse
Iam so sorry, my mistake
when I rebooted my note to recovery I gtt this : Android system recovery <3e>
It looks like CWM thats why Iam confused
How I can get the CWM I used to use with my HTC Sensation
EDIT: Ok done it

Categories

Resources