Database Develop

[Q] Slightly off topic

Quite unrelated to SGM here but I'd like to stick to my regular forum. I have a friend who lives with me and he has an old samsung s7350 which is currently frozen. It needs to be unfreezed in order to use any of the services. Only currently available service is SOS. Basically he tried a few dodgy unlock codes to try unlock to all networks but ended up freezing it!
Anyway, all he needs is a 5.4.4 version of multiloader because it's the only version compatible with that phone and once we have that (exact) version, we can unfreeze the phone. Does anybody have the version to upload for me? Many thanks!

Fraser1978 said:
Quite unrelated to SGM here but I'd like to stick to my regular forum. I have a friend who lives with me and he has an old samsung s7350 which is currently frozen. It needs to be unfreezed in order to use any of the services. Only currently available service is SOS. Basically he tried a few dodgy unlock codes to try unlock to all networks but ended up freezing it!
Anyway, all he needs is a 5.4.4 version of multiloader because it's the only version compatible with that phone and once we have that (exact) version, we can unfreeze the phone. Does anybody have the version to upload for me? Many thanks!
Click to expand...
Click to collapse
Not found... maybe you got the version number wrong.
---------- Post added at 10:36 AM ---------- Previous post was at 10:25 AM ----------
Ok!! Here you go SGT-7350 Multiloader v5.44
http://www.4shared.com/file/-WIl-2kI/SGT-S7350_MultiLoader_v544_by_.html
DO you know how to flash?
Here is what I found on a thread... Maybe it will be helpful
Follow the procedure to leave, step by step as particulars, trade options and I say necessarily full battery charge (important detail) and remove microSD memory card and sim
1) Firmware
2) Multiloader 5.44
3) Samsung S7350 USB cable
4) How to get you phone into firmware mode:
- Volume low
- Camera button.
- Powerbutton
5) Connect your phone with your pc
6) Open the MultiLoader
7) Select the option (MSM6275/MSM6280/MSM6290) in the control section of the MultiLoader
8) Put a check in Boot Change, Full Download and Master Rom (important detail):
- Boot Change
- Full Download
- Master Rom
9) Upload Files Boot, Amss, Rsrc1, Rscr2 (Be sure to select the LOW version for the Rsrc2 button Always choose the LOW version) and Factory fss.
10) Check if your phone is correctly connected.
If the Port Search is ready, click DOWNLOAD.
11) Leave your phone connected during the entire firmware installation.
12) When the MultiLoader says "All files complete", disconnect your phone, remove the battery, insert your MicroSD and SIM card
Click to expand...
Click to collapse

[ROM]Customized ROM for SCH-I559 (CDMA) - Remove carrier bundle & Add Google Service

[ROM]Customized ROM for SCH-I559 (CDMA) - Remove carrier bundle & Add Google Service
DISCLAIMER - I am not a developer or active XDA forum poster, I am a forum reader and user. I worked out all the things in this thread is just personal interest, I DON'T RESPONSIBLE FOR ANY DAMAGE/BRICK FOR YOUR DEVICE IF YOU FOLLOWED THIS THREAD. If you don't agree, please close this thread.
This ROM is for Samsung SCH-i559 CDMA for China Telecom, I didn't test it on other countries' version. If you can read Chinese, please see the original post:
http://www.in189.com/thread-298030-1-1.html
Latest version: v1.3 (update on 11/20/2011)
Download:https://dl.dropbox.com/u/62510762/i559EJ20_MOMING_v1.3.zip
Features:
1. All changes are based on Samsung official stock ROM 2.3.5 EJ20
2. Removed all carrier bundles
3. Removed all 3rd party applications, e.g. QQ, Youku, etc.
4. Removed Samsung market and bundled SNS account
5. Added Google account and services, e.g. Android Market, Maps, Voice Search, etc.
6. Changed the default launcher to ADWLauncher
7. Language: Chinese/English/Korean
Prepare:
1. Install Samsung Kies or standard alone driver for your phone
2. Download the ROM and unzip to any folder
Flash ROM:
1. Enter the download mode
method a: unplug USB cable, shutdown your phone, press and hole "vol down & right key", and then hold the power, after the screen is light on, release all keys
method b: In phone open state, connect you phone to PC with USB cable, run EnterDownload.bat, that's it
2. Open Odin in the package, Select EUROPA_SCH-I559_v1.1.ops file (in rom folder)
3. Select "One Package" Option
4. Select i559EJ20_MOMING_Vxxx.tar in "One Package" edit box
5. Click "Start" to start, during this process, DON'T PLUG OUT USB CABLE!!!
6. Wait about 10 minutes, everything is down, the phone will reboot automatically.
How to ROOT:
1. Copy i559_root.zip to your SD card
2. Enter recovery mode:
method a: unplug USB cable, shutdown your phone, press and hole "vol down & LEFT key", and then hold the power, after the screen is light on, release all keys
method b: In phone open state, connect you phone to PC with USB cable, run EnterRecovery.bat, that's it
3. Use vol+/- to select the menu "apply update from sdcard", and choose i559_root.zip from your SD card, after applied, you can reboot your phone
Enjoy the cleaned ROM

I'm a newbie, can't post URL, wait, wait....

Please reply someone!!
Did anyone test either the flashing or especially the rooting method mentioned above? Somebody please confirm!!
I'm dying to install more apps on this stupid phone

Thumbs up!
Actually, the URL is dead.. but I tried googling the link for any mirrors and I found one on chinese website called 115.com or smth.. (I dont remember ).. I've tried this ROM... very nice bro! Removed all the annoying chinese things... and also able to root!! I've been searching for any root software to root this SCH-i559 CDMA but couldn't do this.. It's okay now...
Very Nice work... I'm now testing this ROM... and I'll request the other features.. I want.. thanks!
cheers up!!!

Is this rom is for galaxy mini?
If not why you post it here?

Of cuz this ROM is for Galaxy Mini... it's from the series of Galaxy Mini.. except that this one is for SCH-i559 (CDMA) version..
btw, I've been testing the ROM and found something.. they are;
- I can't Sign-in into my Google account
- It would be better if the camera shutter sound can be removed cuz it's so annoying with taking snap shots to my friends in our hang out..
- There's no cam-coder to record video.. I think! (I'm not sure cuz I unintentionally destroyed my stock Camera.apk and now using other 3rd party app: and when it switched to video recorder mode, it got errors and exited)
- And this one is big.. I remember when in Android 2.2 (Froyo) I can find my friends name just by typing no. according to their name in phone mode (for e.g. Justin >> 587846 then Justin's contact shows up in phone mode) After updating to GB, (I mean stock ROM also.. not only this one) that feature disappears.. we can't find our contacts only if we know their name... so, we've to type exactly their ph: no. to show up the correspondent friend from our contact which is awkward! We may only remember their name.. and for me, things like remembering only ph: no. and forget name phenomenon never happens to me... So, I want to include this feature if possible..
That's all for now... Thanks for making this ROM... will looking forward to this ROM's future updates!!!!!! =)
Thanks
UPDATE:
Now able to use Google's services after doing factory reset in recovery mode.. =)

meinmain said:
Of cuz this ROM is for Galaxy Mini... it's from the series of Galaxy Mini.. except that this one is for SCH-i559 (CDMA) version..
btw, I've been testing the ROM and found something.. they are;
- I can't Sign-in into my Google account
- It would be better if the camera shutter sound can be removed cuz it's so annoying with taking snap shots to my friends in our hang out..
- There's no cam-coder to record video.. I think! (I'm not sure cuz I unintentionally destroyed my stock Camera.apk and now using other 3rd party app: and when it switched to video recorder mode, it got errors and exited)
- And this one is big.. I remember when in Android 2.2 (Froyo) I can find my friends name just by typing no. according to their name in phone mode (for e.g. Justin >> 587846 then Justin's contact shows up in phone mode) After updating to GB, (I mean stock ROM also.. not only this one) that feature disappears.. we can't find our contacts only if we know their name... so, we've to type exactly their ph: no. to show up the correspondent friend from our contact which is awkward! We may only remember their name.. and for me, things like remembering only ph: no. and forget name phenomenon never happens to me... So, I want to include this feature if possible..
That's all for now... Thanks for making this ROM... will looking forward to this ROM's future updates!!!!!! =)
Thanks
UPDATE:
Now able to use Google's services after doing factory reset in recovery mode.. =)
Click to expand...
Click to collapse
I have only the net share driver in China, Where you suggest me to post the ROM? I'm not familiar with other share driver

Do you mean the hosting site for the ROM file? If so, I suggest you to host at
www [dot] mediafire [dot] com where [dot] means .
You can create a free account and upload at there.. so, u can manage and keep your uploaded files as always.. Is there any new update to ur ROM?? I'm very looking forward to it..
keep up the good work..

firmware links
please please....i beg you if you can give me the fresh links for the i559 rom !!!!!
you can upload them on mediafire.com or else create a google account and in that open documents and upload the files and make the link open in web !!....please ..please....reply!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

the '.tar' file is currupt...
dear friend, i downloaded the zip file. but while unzipping it said the .tar file is currupt... plZ help

I bricked my sch i559. Help me to recover
during updating this firmware i bricked my galaxy pop. After completing some percent it was taking too long time then i remove the cable and lost the phone. Plz some one help me to recover.

MIUI Global 7.2.4.0.0 uses A LOT of RAM. (?)

Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John

jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.

proag said:
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.
Click to expand...
Click to collapse
Thank you. I didn't notice the extra zero and didn't think it was unoffical.
Sincerely
John

jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You are on an un-official modefied version.
The fake version is 7.2.4.0.0 <- your version.
The real official and supported by Xiaomi version is 7.2.4.0

Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!

androFRUST said:
Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!
Click to expand...
Click to collapse
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.

TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all

TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
Thanks for the reply! Before proceeding, I actually received the SMS to unlock the bootloader but im still at work so I cant go back and attempt the unlock. So just trying to manage my expectations here.
Is it safe to assume that all I need to do now is log in to the unlock tool by miui and unlock? because im still on 7.2.4.0.0 (the unofficial discontinued rom) and I have no way of flashing it to any other roms. My last attempt last night was again, stuck at 52% after a nights worth of wait! TT
---------- Post added at 03:01 AM ---------- Previous post was at 02:49 AM ----------
xtachix said:
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all
Click to expand...
Click to collapse
Thanks for the help. I will attempt this as a last resort. I just received the SMS to unlock my bootloader. Hopefully its as simple as logging in and unlocking so I can get rid of this pesky 7.2.4.0.0 supposed "Global" rom.

i have successfully flashed to global rom!!! but now i have no audio coming from the speakers!!!! is it just my luck!!!??? and after reflashing again.. its completely dead.. its goes into the sign in to miui welcome page and just goes insane.. like to the point where i cant even select options and and random menu sounds keep coming up.. cant even turn off i had to reboot to fastboot.. is a goner? sighs..

7.2.4.0.0 to Resurrection Remix (CM13)
- unlock bootloader
- flash TWRP with fastboot
- install Resurrection Remix
- install GApps
- reboot, now it's say Google play stopped.
- go back to TWRP
- wipe data
- reboot and everything is working

Rooting DOOGEE X5 MAX Pro

Hi,
I'd love to know if someone has already rooted'n'rommed this phone.
Please let us know! :fingers-crossed:

TT TT said:
Hi,
I'd love to know if someone has already rooted'n'rommed this phone.
Please let us know! :fingers-crossed:
Click to expand...
Click to collapse
Hi, on russian site they have already done it
ttp://4pda.ru/forum/index.php?showtopic=749517&st=560#entry51150598
Add "h" in the beginning (I don't have permission to publish links )
And use google translate
PS. Don't forget to create backup before all manipulations. Especially IMEI

HoboMoe said:
Hi, on russian site they have already done it
ttp://4pda.ru/forum/index.php?showtopic=749517&st=560#entry51150598
Add "h" in the beginning (I don't have permission to publish links )
And use google translate
PS. Don't forget to create backup before all manipulations. Especially IMEI
Click to expand...
Click to collapse
Nice!!
Good reason to practice my Russian :victory:
Thanks a lot, Sir!

altrom also has a rom can be installed via TWRP. Not sure how legit it is though.

TT TT said:
Hi,
I'd love to know if someone has already rooted'n'rommed this phone.
Please let us know! :fingers-crossed:
Click to expand...
Click to collapse
I finally made it to flash TWRP with a flash tool I found via a doogee-blog, a official doogee Q&A site and a blog on doogeemobile.
Why do I have to verify so often?
EDIT: I had a look at my documents, got the flash tool from dogeemobile.com and the TWRP 3.0.2 from needrom. You have to pay attention that you use ROMs for the particular processor of the maxpro (MT6737 M). SU from here of course. :good:
HTH
Why do I have no verification to do any more??

still cant do it
messing around for a week and still no sucess.
flash tool says !sucessful! but i reboot and get stock recovery - not what i expect (twrp)...
also cpu-z says is mt6735- but if i try that one i get :
chip type not match
targetef use value 0xA4020000
but it works with mt6737 - it just dont reboot into that other loader....
any ideas
mlcrip co uk/DooGee/i1.jpg
also tried both x5pro and x5maxpro...
(TWRP-Doogee-X5-MAX-PRO.zip)
(TWRP_Recovery_X5_Pro.rar)
dev enabled, usb debugging, oem unlocking on,
also yes, i do imediately go for bootloader (volume up while turning on)- doesnt work no matter what.
UPDATE:
DooGee X5Max_Pro MT6737M (Android 6.0, 20161123, kernel 3.18.19+)
i sorted it. turns out i had to use x32TWRP (fund it here somewhere on this site)
MT6737M_Android_scatter.txt (plus image come with it)
SuperSU-v2.78-SR3-.zip
also i randomly went for adb commandline to 'unlock rom' not sure if it was necessary, but wont hurt.
so if any noob wanna easy way,
1. 'minimal adb and fast boot' to unlock rom (few cmd commands and you done)
2. start flash tool, set CORRECT scatter file (MT6xxx- if you set wrong model it will give you error popup)
3. set DOWNLOAD ONLY' on drop down box. press DOWNLOAD button.
4.REMOVE BATTERY off your phone. Plug usb cable. youll get 'sucess' pop up window. close the flash tools. disconnect phone but keep it OFF!
5.pop in the battery. press volume up+on button.
at this point you should get some proper user interface, not the black screen with some letters (stock bootloader) something went wrong.
what you should see imediately once you turn it on- just google TWRP images lol.
techbeasts.com/wp-content/uploads/2014/10/TWRP-Recovery.bmp
also all files needed (incl flash tool) i dropped here:
one by one (in case if someone needs scatter file or something)- or inside 'all' folder- all tools compressed into rar
mlcrip.co.uk/android/rooting/files/

LGv40 freezing/ having hard time to get to the home screen . Any help ?

Hi
I have bought a used lg v40 v405ua variant written on box ( which doesnt show sprint or at&t logos/ bloatware or branding) ; I bought it as stuck in bootloop .
I do not know if before it was flashed to this model , or anything else.
After some patience and a number of factory reset I've managed to go over the red lg logo bootload screen freeze, go through the initial settings page and with wifi OFF and no simcard in to arrive to the home page , without freeze ;
I was also able to navigte settings , and to switch to developer / enable oem unlock ON , and usb debugging ON.
I was able to get IMEI , to see it runs Android 9 after factory reset , to read it is v405ua variant , to enter camera and take a pic .
The phone is currently On shows time and date on double tap and I am able still to navigate it into settings with no slow down or freeze .
If I navigate or get into some app with wifi off , or equally if I turn on wifi and it starts exchanging data or updating (?) , then it slows down instantly, usually stuck on a black screen and the 3 android buttons downside , sometimes I am able to push power button and use power menu to turn it off , the majority of times it is freezed and it needs volume down + power button to restart ;
any restart will get it to the lg red logo boot screen , and freeze there ( and I will need to try factory reset/erase ).
I am no expert at all on android/mobiles/recoveries , I can't imagine if it is software that is corrupt or if it is an hardware problem or what else .
I 've read many different threads about unlocking bootloader , rooting (or changing model and else), and I am not sure as there are many options
what should I try from here ?
ps a side information : if I turn on Bluetooth the icon in the tiles menu' blinks on and off , or when I enter the bluetooth activation page and switch it on it remains a pale blue >> in the meanwhile the phone cant see or be seen by any other bluetooth device .
Any help ? thanks all of you who can help me this out

I recommend you start from scratch.
Start here: https://forum.xda-developers.com/lg-v40/how-to/guide-lgup-root-t3967858
Use LGUP and Download mode to flash the latest version (Oreo or Pie) of the V40 OS to the phone.
[NG]Owner

started here :good:https://forum.xda-developers.com/lg-v40/how-to/guide-lgup-root-t3967858
Download These FIles: DLL LGUP UI_Config
v40 with no root ( my case ) :
Step 1. Install the provided LGUP.msi (you should now have C:\Program Files (x86)\LG Electronics\LGUP)
Step 2. Install the provided DLL (you should now have C:\Program Files (x86)\LG Electronics\LGUP\model\Common)
Step 3. Extract the LGUP_UI_Config_m250n_[cxz].zip file anywhere on your computer, then copy or move the file to the common folder (the same one the DLL installs too)
Step 4. Enter download mode and flash any KDZ that is compatible with your device with the Refurbish or Upgrade options.
Click to expand...
Click to collapse
I did 1. 2. 3.
not sure which "compatible" KDZ should I get , as I don't know which v405UA model is my v40 , .. : supposely there's more v405UA ( different?) models and different KDZ for different v405UA models too ?

boodi said:
not sure which "compatible" KDZ should I get , as I don't know which v405UA model is my v40 , .. : supposely there's more v405UA ( different?) models and different KDZ for different v405UA models too ?
Click to expand...
Click to collapse
My recommendation is to cross flash over to the US version (unless you are not in the US).
Grab either the Oreo or Pie version here:
https://lg-firmwares.com/lg-lmv405qa-firmwares/
[NG]Owner

I am not in the US ( I am in EU )

I am ready at step 3.
OEM developer and USB debugging are switched on , I don't know if I need something else .
+ I still need to understand which "compatible" ( as stated in the lgup thread ) KDZ , among many , to flash it with lgup , and then try the procedure .

no luck until now trying with LGUP 1.15 or 1.16
installed both but they do not start / do not show anything any dialog window any app any alert

boodi said:
no luck until now trying with LGUP 1.15 or 1.16
installed both but they do not start / do not show anything any dialog window any app any alert
Click to expand...
Click to collapse
That usually means a driver issue. I think you have to have the phone plugged into and recognized by the computer beforre anything will show in LGUP.
As for the kdz, these are the European kdzs: https://lg-firmwares.com/lg-lmv405ebw-firmwares/
[NG]Owner

it was an Antivirus ( AVG )
at least , I removed it and then all went straight .
I flashed it with the v405QAe20 kdz with lgup 1.16 - refurbish option . very fast and straight .
Now I have "v405UA20e" listed settings / phone / software ( no v405QA20e as expected ) and should probably try flashing it to a european version (?)
New problem though ........ the phone doesn't freeze anymore , but now it shuts off on his own from time to time
where to go from here ? root ?

up

boodi said:
it was an Antivirus ( AVG )
at least , I removed it and then all went straight .
I flashed it with the v405QAe20 kdz with lgup 1.16 - refurbish option . very fast and straight .
Now I have "v405UA20e" listed settings / phone / software ( no v405QA20e as expected ) and should probably try flashing it to a european version (?)
New problem though ........ the phone doesn't freeze anymore , but now it shuts off on his own from time to time
where to go from here ? root ?
Click to expand...
Click to collapse
It depends dude, are you trying to use it in EU? If yes then it'd be a good idea to flash a stock rom from that area. It enables radios/bands that are used in your area so that you'd have no issues calling/texting or i'net.
The post right above yours links to the appropriate ROMs for you so you should have all you need.
After you've flashed the ROM, I'd do a factory reset, in the settings app, not in recovery unless you have the original email info, otherwise you might trigger FRP and you wouldn't wanna do that. This might help with your reboot issue, in fact I'd do it twice in a row just in case.
There you go, you're all set.

I did the factory reset. Problem is ( new...completely) phone have hard time in recharging now......this is *completely new* problem. it came out of nowhere only after last self-switch off( and after flashing the new firmware v405uae20) ; before never showed it . When it was off and I plugged it (before the flash), the phone always got the battery icon showing in the center of the black screen /with the percentage of battery reached.
Now it doesn t.
Or it is an hit and miss ( and it doesn't depend on charger or failing usb port) . Before this the phone has remained alive 4 days without much use and no simcard in, without issues