I want to know why this error occurs !!?
"Can't mount mmcblkp01"
basically i've already been into this bootloop problem but it came up again and was watching this thread so i need to clear off why does this happen and why doesn't we have Perfect-FIX !?
and this time i can't have any recovery options (it takes much time to boot twice and after that the 3-button combo the screen displays random static screen like old TV's!! :/ ) but i can get acces to download mode!
Help plz!
Tried this thread ,I can't get this one-click unbrick work it always says..heimdall must be installed even though i copied latest heimdall v1.3 too!!
can i get any help please ?
Related
Ok My son gave me today this phone,apparently it had Darkys gingerbread clone on it,but my son could not unlock it to be use in another carrier,instead of asking me first since he doesn't know anything about Androids,he actually make a factory restore on the phone,from withing the phone OS,(going by what he told me.
Long story short the phone did not boot up,it just sat there on the I9000 screen for ever.
So i try to get it into recovery but it would not work,so i manage to get it to boot on download mode,and i try to install a stock one,it say success on Odin and all,but when it booted it pass the I9000 pass the galaxy one,and then the screen go's black ,the buttons light on but the screen black.
So i see if i could make it boot into recovery again,it worked,i look around to see and there was Darky's Ginger clone zip,so i install it,it does install but with an error.
E: Can't mount /dev/block/st110
(file exist) error mounting /datadata/!
This^^ error when i restart it pass over the I9000 logo and the crossing colors of the X of Darkys rom boot,but it just sat there,and like in 2 minutes it vibrate short once,and then again a little longer,and like loop again doing the same every 2 minutes or so,i leave it for like 20 minutes and nothing,it doesn't pass that part.
Any help.?
I don't know if the 3 button fix was apply,but i can get the phone on download mode so i don't know.
I am trying to save the phone.
Excuse my bad English.
The phone will be fine. You need to reflash back to stock with Odin.
Follow the instructions carefully as set out in the FAQ thread
http://forum.xda-developers.com/showpost.php?p=7152078&postcount=2
Hello Guys
I have a challenging, near brick case.
I have an SGS I9000 I bought from a provider in Singapore. I had a row of misfortune with this device and it was DOA with receiver problem. It was sent twice to Samsung labs and eventually they replaced most of its internals.
When the device eventually returned from the labs it had a 2.1 ROM version of the local provider (IDEA) that was locked for the 3-button maneuver.
I have read all that was written about it, decided to get a decent JIG that work like magic and bring me easily back to DOWNLOAD mode. I decided to install an alternative ROM of my country that had a clear good installation instructions: PilotX 3.0. When this did not work I tired several others, all from ODIN only. In general what happens:
1) After the ODIN restarts the application the ROM goes up and gets stuck after the S opening screen. The device stays black with buttons light on and vibrates every few secs.
2) After the ODIN reset there are messages on the external environment that says E: cant mound /dev/block1st/st110 or 111 (invalid argument)
or: copy dbdata_media cant mound ... copy media content failed
3) I did manage to get to recovery mode despite the errors from the ODIN installation and managed to install from SD card ZIP files the PilotX ROM. It did not give any error messages but it got stuck the eventually the same way.
4) The only ROM I managed to install and actually get running was the local ORANGE ROM. This too did not recognize my SIM and did not solve the 3-button issue.
I am now with a semi bricked device, luckily returning to Download mode easily thanks to the JIG.
Any suggestions guys ?
Thanks
B
You need to flash a full rom in Odin (one with 3 files) and repartition checked. I normally use xxjpc for this purpose.
Sent from my GT-I9000 using XDA App
update
I managed to intall an ACLAIR 2.1 ROM with ODIN that actually works.
I think using a proper PIT did the trick. not sure.
Still:
1) I did get to see that when rebooting there was still a red error message saying something like: "can not access system syn ...."
2) I am still stuck with a phone that refuses to do the 3-button Recovery maneuver.
I guess I am back to square one, searching on the 3-button fix threads for a proper solution. Any good suggestions or boosts. I am after a sleepless night
Thanks
Hey guys I've got some serious problems with my phone...
Today I wanted to flash the new recovery from ivendor on my brend new PC. Ive installed the "Samsung Driver for mobile phones" because I know that Kies won't work on CM10. Well so far so good. I flashed the new Recovery via ODIN. The phone rebootet normally after that like always. Than back on my Homescreen I was going to settings to do a factory reset including deleting all files from SD card. The phone rebooted again and than everything was going to hell...
Than the Android symbol showed up like always after a full wipe but that time the phone bootet into recovery directly and my recovery shows a lot of errors like E:cant' mount / cache/recovery/log E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p17. And my recovery background has this Android symbol which you can see in that link:
http://4.bp.blogspot.com/-XU5LJWLFf...AZ4/fiL5GNNDg6g/s1600/AndroidRedTriangle.jpeg
When trying to boot normaly my phone only boots till Samsung galaxy/Cyanogenmod screen and after 10-15 secound it goes off...
Please Help!
Cant help you alot, but try to get stock firmware and then root and flash your rom again. It should help you.
Sent from my GT-I9000 using xda app-developers app
!!!!!!!!!!!
the most important thing:
you have an i9001
dont flash anything that is made for i9000
flash only things that are made for i9001
!!!!!!!!!!!
please try to flash a stable recovery via odin like clockworkmod 5.xyz.
you may find it in the CM9 thread by arco
edit: just found:
http://forum.xda-developers.com/showthread.php?p=39640245
Greetings & good luck
Thanks guys for your help. I tryed all of that. Even flashing Stock ROM hasn't helped. Phone is bricked : /
does odin detects your i9001 when it shows the screen described in 1st post?
if you could do something with odin and if there are no hardware problems your phone is far away from bricked. (my opinion)
take a look at our wiki. you may find something to reset everything (partitions, bootloaders...)
good luck
well dude u r using s+ right..try flashing it through the recovery mode directly if u can access the card..or take a card reader and mount the cwm recovery and flash that and flash those zip files u want through external sd card..i dont trust odin much..maybe we can figure this out together if u didnt fix it yet.
I have exactly the same problem, no matter what I flash (with Odin/CWM) it no longer boots, and it fails to wipe data partition. Any idea how to repartition de data partition?
It never happend to me but I'll try to help you. I don't know if I'm allowed to put links on this forum but broodplank who is known on this forum for his sgs+ releases has a great tutorial on his site and u might wanna check it out. Google broodplank and acces his website, under the section tutorials you will find what you're looking for.
or look on his xda thread...
http://forum.xda-developers.com/showthread.php?t=2216996
Thanks, guys, I'll give it a shot :good:
Hi
I am new in this site..
i have device gt-i9000. this give me my cousin to me and it was totally crashed (it was continue booting and couldnt get access in recovery mode ):crying: but this i have solved this problem using odin 3.07 and pit file (JW7_JW2_JW1.rar or tar 306.353kb). then i tryed to boot again when booting finnish and throw a lot of errors while i am doing startup configuration(choose lang blablalla )and now i stuck in configuration guide i cannot go ahead it is still give me some errors :crying::
*process com.google.process.gapps *
*process com.andorid.setupwizard*
*com.google.maps.map* blablalbal
and now i dont know what i have to do ?
i tryied to do custom recouvery mode it done successfully
but external sd card i cant find and i connct phone with pc it connect and lunch me phone folder tooo but i cant put file in this phone folder.
note now i can access in recovery mode. idk what i do in recovery mode. i already facotry reset but doesnt happen anything...
help me plese
is there anyone who can help me please please r urgent
I just want to ask if there is any way to unbrick my gt s5570. Its been flashed with a s5570i recovery ( By frustration ). No recovery mode no download mode the only and only way to get it detected by pc is to use volume up+home+power.
Odin always gets stuck at "setup connection" while flashing the stock rom every time.
What i have tried ?
Every button combo that exist nothing works result is always only switched off cell.
Pc detects it correctly only with voulme up+ home plus + power
Odin always gets stuck at setup connection while trying to flash.
Pressing the download mode buttons with the mobile connected to pc and insert in the battery also doesn't work.
Why i flashed it with a wrong recovery ?
Searching for the CWM 4.4.x.x i got frustrated i couldn't find it any where( spend a day almost ) finally saw one for s5570i installed it ( I though what can go wrong i have odin and download mode ) and after restart its bricked.
Why i still have hope ???
Its detected by a computer there " is " a way to make it work again and i mean it but it might have not been founded yet.
Any SD card hack that might help me boot it and recover it ??
Any any method just tell me to try EXCEPT JTAG.
I have been on xda since 2013, not as a member but i have been flashing this little thing with every CM rom that comes out with the help of xda forum.
I am not a mobile freak but i try modifying every thing i own every thing.
What i have learnt is that recovery mode is like bios and ROM is like windows as simple as that. Don't play with bios do whatever u want to do with windows.
I think jtag is the only way . Have been searching on internet for 3 days non stop but for wrong recovery zero solution are online. Except if someone works on a new solution