I'm fairly new to the rooting business but I've been treading lightly. I have a few newbish questions that I need answering, and I thank you in advance.
Today, using Psouza's Moto-1-click tools, I restored my /system/app to its stock state, unrooted, reformatted, and then installed 5.6.890 (the official OTA version), followed by re-rooting.
I wished to make a full backup of the complete stock system, and so I purchased "Droid 3 Bootstrap" from the Android Market. I proceeded to boot into Recovery Mode and created a backup of my now stock system. I also went ahead and downloaded "ClockworkMod Recovery" from the market and paid for the premium version. I noticed that I can also make a backup from "ClockworkMod Recovery" in the same way that I made a backup from "Droid 3 Bootstrap."
Question is this...what's the difference between the 2? I know that ClockworkMod Recovery gives me the capability to flash different ROMS, which is the reason I purchased it (awaiting future ROMS, figured I'd just download it now). But did I have to download Droid 3 Bootstrap Recovery as well? Couldn't I have just backed up using CWM Recovery?
Basically, I'd like to know the difference between the two...in the most basic explanation, if at all possible. I'm still learning about all this and I really enjoy it, but I'd like to have a full grasp of what I'm doing exactly.
Thank you in advance.
Lyxdeslic said:
I'm fairly new to the rooting business but I've been treading lightly. I have a few newbish questions that I need answering, and I thank you in advance.
Today, using Psouza's Moto-1-click tools, I restored my /system/app to its stock state, unrooted, reformatted, and then installed 5.6.890 (the official OTA version), followed by re-rooting.
I wished to make a full backup of the complete stock system, and so I purchased "Droid 3 Bootstrap" from the Android Market. I proceeded to boot into Recovery Mode and created a backup of my now stock system. I also went ahead and downloaded "ClockworkMod Recovery" from the market and paid for the premium version. I noticed that I can also make a backup from "ClockworkMod Recovery" in the same way that I made a backup from "Droid 3 Bootstrap."
Question is this...what's the difference between the 2? I know that ClockworkMod Recovery gives me the capability to flash different ROMS, which is the reason I purchased it (awaiting future ROMS, figured I'd just download it now). But did I have to download Droid 3 Bootstrap Recovery as well? Couldn't I have just backed up using CWM Recovery?
Basically, I'd like to know the difference between the two...in the most basic explanation, if at all possible. I'm still learning about all this and I really enjoy it, but I'd like to have a full grasp of what I'm doing exactly.
Thank you in advance.
Click to expand...
Click to collapse
I'm assuming the 'clockworkmod recovery' app is rom manager. Rom manager is best for easily downloading roms (if the developer sets it up on there, not all roms will be on rom manager). I personally recommend against using rom manager to do backups/restore/rom installs because it is known to cause some issues. So, my advice, just do it all manually to avoid problems down the road. All you need is the d3 bootstrapper app
Sent from my DROID3 using XDA App
erismaster said:
I'm assuming the 'clockworkmod recovery' app is rom manager. Rom manager is best for easily downloading roms (if the developer sets it up on there, not all roms will be on rom manager). I personally recommend against using rom manager to do backups/restore/rom installs because it is known to cause some issues. So, my advice, just do it all manually to avoid problems down the road. All you need is the d3 bootstrapper app
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Correct, the "CWM Recovery" I kept referring to is indeed Rom Manager, my apologies. So, in a nutshell, what you're recommending is; use D3 Bootstrap to create your custom backup, and use Rom Manager specifically for Mods only...correct?
I think he's saying to not use rom manager at all. You can flash roms from cwm recovery.
Edit: just to clarify I mean by booting into recovery using the bootstrapper and flashing a rom from there to avoid any issues caused from the rom manager
Sent from my rooted xt860
Lyxdeslic said:
Correct, the "CWM Recovery" I kept referring to is indeed Rom Manager, my apologies. So, in a nutshell, what you're recommending is; use D3 Bootstrap to create your custom backup, and use Rom Manager specifically for Mods only...correct?
Click to expand...
Click to collapse
I recommend to not even use the rom manager app, as everything can be done manually. Roms can be downloaded from forum sites. Just remember to do a wipe data/factory reset each time you flash a new rom. This prevents fc issues. On hashcodes blog you can get a modified version of the koush bootstrapper app that let's you enter recovery from bptools. That way if you screw up /system and can boot straight into recovery, restore a nandroid and you're good to go.
Sent from my DROID3 using XDA App
erismaster said:
I recommend to not even use the rom manager app, as everything can be done manually. Roms can be downloaded from forum sites. Just remember to do a wipe data/factory reset each time you flash a new rom. This prevents fc issues. On hashcodes blog you can get a modified version of the koush bootstrapper app that let's you enter recovery from bptools. That way if you screw up /system and can boot straight into recovery, restore a nandroid and you're good to go.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
I appreciate the responses. Could you explain to me how the modified version of D3 Bootstrapper allows you to enter recovery in case of a bootloop? What is "bptools" and how is it accessed if the phone won't boot up?
Edit: Also, what type of problems have been seen when using Rom Manager to flash Roms as opposed to a Bootstrapper? Aren't they both created by the same Dev? I would assume Rom Manager is just a more user-friendly method to flash Roms since it's so self-explanatory in the app itself.
Again, I appreciate the time you guys are taking to help me understand this.
Lyxdeslic said:
I appreciate the responses. Could you explain to me how the modified version of D3 Bootstrapper allows you to enter recovery in case of a bootloop? What is "bptools" and how is it accessed if the phone won't boot up?
Edit: Also, what type of problems have been seen when using Rom Manager to flash Roms as opposed to a Bootstrapper? Aren't they both created by the same Dev? I would assume Rom Manager is just a more user-friendly method to flash Roms since it's so self-explanatory in the app itself.
Again, I appreciate the time you guys are taking to help me understand this.
Click to expand...
Click to collapse
When your phone is powered off hold the m button on the keyboard then press the power buttong(keeping m pressed) you'll then get a list of boot options. Volume down scrolls while volume up selects. Bptools is at the bottom. When you go to bptools then press volume up and enter it you will boot to clockworkmod recovery. This only works with the modified bootstrapper app. This way is much safer because its possible to soft brick the phone with the normal koush recovery and not be able to enter recovery. You'd then need to flash the xml files. The normal bootstrap app requires that phone bootloop before the custom recovery will kick in. As for rom manager, its had problems wiping data/factory reset I think. You can still use it, there's just a possibility of of the rom not working properly
Sent from my DROID3 using XDA App
erismaster said:
When your phone is powered off hold the m button on the keyboard then press the power buttong(keeping m pressed) you'll then get a list of boot options. Volume down scrolls while volume up selects. Bptools is at the bottom. When you go to bptools then press volume up and enter it you will boot to clockworkmod recovery. This only works with the modified bootstrapper app. This way is much safer because its possible to soft brick the phone with the normal koush recovery and not be able to enter recovery. You'd then need to flash the xml files. The normal bootstrap app requires that phone bootloop before the custom recovery will kick in. As for rom manager, its had problems wiping data/factory reset I think. You can still use it, there's just a possibility of of the rom not working properly
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Thanks so much for the info man.
Related
Today, Koush added support for the Droid 3 to ClockworkMod.
This includes releasing a Droid 3 Bootstrap which I believe he'll have some download links for or be placing on the market.
BEWARE: If you plan on using the new bootstrap from Koush, PLEASE use the "Remove Recovery" button and uninstall my Bootstrap APK before installing his.
Don't use 2 Bootstrap APKs together. Universe Explode. Or, maybe it could be unpredictable if you decide to remove mine later.
Thank you for listening to this public service announcement.
i see it in the market
Whats the difference with this one and yours Hashcode? Are you still updating yours?
-smc
Its the newest version. It works with rom manager. Probably flashes all partitions, but not sure.
Sent from my DROID3 using XDA App
So you don't need to install bootstrap before installing this?
So quick question, if we were to flash something and it ended up boot looping, like flashing a theme, how do we get back into cwm if we can't get back into android to access the app? Need to be able to restore in case something like this happens.
Sent from my DROID3 using XDA App
No. You have to uninstall the previously released bootstrap/recovery. After which you install this new one.
Sent from my DROID3 using XDA App
Yep uninstall Hashcodes version from his app, then install the "Droid 3 bootstrap" on the market or from here http://t.co/IM110WZ3 then use clockwork mod to install the recovery for Droid 3 in the flashable list.
@clockworkmod
-smc
edru said:
No. You have to uninstall the previously released bootstrap/recovery. After which you install this new one.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
But if you havent installed the old one?
buckmarble said:
So quick question, if we were to flash something and it ended up boot looping, like flashing a theme, how do we get back into cwm if we can't get back into android to access the app? Need to be able to restore in case something like this happens.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Yeah i'm also curious how your supposed to get back into recovery in case of a boot loop?
Are either you or Koush going to be continuing work on your alternate-system-partition scheme for making 2nd-init not an accident waiting to happen?
Xenoproctologist said:
Are either you or Koush going to be continuing work on your alternate-system-partition scheme for making 2nd-init not an accident waiting to happen?
Click to expand...
Click to collapse
This. It is nice having official support, but the idea of keeping a 99% pure system and almost no risk of fubaring 2nd-init is extremely attractive.
Hmm not sure how to access the recovery from device power down using this, going to bptools just initiates a normal start up.
-smc
I too hope we see the 2nd init partition I Don't plan on installing the official at this point.
I used Hashcode's app to uninstall his recovery.. rebooted... downloaded Koush's Rom Manager from the market.. installed... started the app and flashed clockworkmod recovery... gave su permissions.... clicked Reboot into Recovery and it just reboots normally... no CWM... am i missing a step? is there a keyboard combo that will boot into CWM... vol-down+power only takes you to fastboot..
Thanks to all for continuing to develop this phone!
ckarrow2 said:
I used Hashcode's app to uninstall his recovery.. rebooted... downloaded Koush's Rom Manager from the market.. installed... started the app and flashed clockworkmod recovery... gave su permissions.... clicked Reboot into Recovery and it just reboots normally... no CWM... am i missing a step? is there a keyboard combo that will boot into CWM... vol-down+power only takes you to fastboot..
Thanks to all for continuing to develop this phone!
Click to expand...
Click to collapse
yeah, you need to bootstrapper app, and i believe you need to click bootstrap recovery everytime you need to reboot into cwm.
you can get the app here http://t.co/IM110WZ3 (thank somemadcaaant)
erismaster said:
yeah, you need to bootstrapper app, and i believe you need to click bootstrap recovery everytime you need to reboot into cwm.
you can get the app here http://t.co/IM110WZ3 (thank somemadcaaant)
Click to expand...
Click to collapse
Thanks! worked perfectly! I couldn't see the forest for the trees
I seem to be having some issues getting this to work.
I uninstalled the Hashcode recovery, then removed his app. After that I downloaded the Droid3 recovery from the market and installed that. Going into Rom Manager, after a reboot, I was it did not list any Clockwork as being installed. I clicked on the list and Droid 3 was now one of the options so I applied that and went to test by having Rom manager reboot into recovery.
It sat there for a good 5 minutes on the red Motorola logo. Pulled the battery to reboot and it booted fine but I cannot figure out how to access the recovery.
calash said:
I seem to be having some issues getting this to work.
I uninstalled the Hashcode recovery, then removed his app. After that I downloaded the Droid3 recovery from the market and installed that. Going into Rom Manager, after a reboot, I was it did not list any Clockwork as being installed. I clicked on the list and Droid 3 was now one of the options so I applied that and went to test by having Rom manager reboot into recovery.
It sat there for a good 5 minutes on the red Motorola logo. Pulled the battery to reboot and it booted fine but I cannot figure out how to access the recovery.
Click to expand...
Click to collapse
Using the bootstrap app make sure you click bootstrap recovery then reboot recovery using the app. See if that helps.
Sent from my DROID3 using XDA App
erismaster said:
Using the bootstrap app make sure you click bootstrap recovery then reboot recovery using the app. See if that helps.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
That did it. Now it shows up in ROM manager and I can boot into the recovery from both apps.
Thanks
Okay right about now i am really confused about flashing roms on droid 3,
ok so i have root access now what recovery should i put?
and here is my big question.
can i flash dark droid or steel droid regardless of system?
my phone says .866 and droid steel says i need .890?
am confused on this part,
sorry for the stupid questions.
Yes you do need .890, and I recommend that you install the tweaked bp tools bootstrap by hashcode to get cwm, it saved my softbricked droid3
Sent from my DROID3 using XDA App
jojo4747 said:
Yes you do need .890, and I recommend that you install the tweaked bp tools bootstrap by hashcode to get cwm, it saved my softbricked droid3
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Not gunna lie im a lil confused too..what's the point of flashing the tweaked one if when you flash a new rom it overwrites it? So you can't access cwr from bp tools then
/droid3
under settings, about phone, your system version is .866? i think we were .959 and now we're .890. Yes, you would want to use hashcodes modified version of koush's bootstrap.
beard0 said:
Not gunna lie im a lil confused too..what's the point of flashing the tweaked one if when you flash a new rom it overwrites it? So you can't access cwr from bp tools then
/droid3
Click to expand...
Click to collapse
Basically installed on your phone as an app, and you re-bootstrap/recovery after you flash your custom rom so you can create new backups/restore/flash update .zip files ect. After the rom is flashed as well... if you think you wont have any issues ever after, by all means, brave the world without your cwm recovery on there... but that kinda seems like you'd be sinking your d*** in looseness w/o a rubber... and no body likes that itch in the AM...
Sent from my DROID3 using Tapatalk
Seirÿu said:
Basically installed on your phone as an app, and you re-bootstrap/recovery after you flash your custom rom so you can create new backups/restore/flash update .zip files ect. After the rom is flashed as well... if you think you wont have any issues ever after, by all means, brave the world without your cwm recovery on there... but that kinda seems like you'd be sinking your d*** in looseness w/o a rubber... and no body likes that itch in the AM...
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Not saying it wont be usefull but if you can manage to navigate to the bootstrap app and hit the button for bootstrap recovery..why can't you just hit the button for reboot recovery? I guess im just missing my unlucked bootloader from my incredible lol I used to screw with my phone so much lol
But why does no one wipe for any of these roms?
And what is safe strap exactly?
/droid3
IF you can access the app, yes you could just hit reboot recovery. If youre bootlooping or something you can go into recovery and select bp tools and that reboots into the same recovery as selecing reboot recovery in cwm. and the safestrap is different from the tweaked bootstrap. the safestrap boots from /preinstall or something. Also, you should wipe especially after switching to/from CM7
MrJudylicious said:
IF you can access the app, yes you could just hit reboot recovery. If youre bootlooping or something you can go into recovery and select bp tools and that reboots into the same recovery as selecing reboot recovery in cwm. and the safestrap is different from the tweaked bootstrap. the safestrap boots from /preinstall or something. Also, you should wipe especially after switching to/from CM7
Click to expand...
Click to collapse
This. ^^^
Basically you want it if you can't actually boot your phone.
if you don't redo your recovery and just rely on clicking those buttons when you need them from the app... you'll be stuck if you bootloop and have to flash the sbf in order to get your phone back. I much rather restore from recovery and have 99% of my phone data back with no issues.
The safestrap and 2nd Int. stuff is wicked cool, I just wish i knew more about that... I couldn't really help describe that part lol.
How can I install two ROMS (MavROM and ICS) on my D3? one in SAFE MODE and one without.
what programs to use?
I already have MAVROM installed with SAFESTRAP from hashcode, but if i disable it, i get the stock rom.
thank you.
You have to use a bootstrap to flash your nonsafe before you install safestrap
Sent from my XT860 using xda premium
can you direct me to a link to that application? all I can find is safestrap from hashcode.
i have this one: "Droid3CWBootstrap"
http://www.appbrain.com/app/droid-x-recovery-bootstrap/com.koushikdutta.droidx.bootstrap
but how can I install zip with it?
I'm sorry I didn't see your last PMs
Anyway.
1) Start in stock ROM http://forum.xda-developers.com/showthread.php?t=1336980
(Or your non-safe ROM in safestrap and then remove safestrap)
2) After root, download bootstrap (I uploaded it) http://www.mediafire.com/?3u8xhmsp3lg5yfx
3) Install the APK and open the bootstrap app. Press install recovery then reboot recovery. You're now in bootstrap, not from using vol -+ etc (from your PM)
4) Flash mavrom using their CWM Recovery instructions
5) Once you got it setup, remove bootstrap app and install safestrap http://goo.gl/1pr5T
6) Reboot into safestrap and switch to safe system. Make a backup if you want before swithing. The switch will backup your current ROM (data), which is mavrom. Once in safe-system you can now flash ICS using the instructions. This will flash ICS in a different place. When you go back to non-safe system your mavrom will be restored.
Hope it's clear now
thank you. sorry i "attacked" you with a lot of PMs. i tought you had enough
i will try it tomorrow.
bogdan_wrc said:
thank you. sorry i "attacked" you with a lot of PMs. i tought you had enough
i will try it tomorrow.
Click to expand...
Click to collapse
Np aside from the fact that I'm not on XDA all day the notification is very small - most of the time I don't see it until the next day
Will this method work with Liberty as well? I have never installed safestrap, but have bootstrap installed. I thought that I had read that safestrap does not work with Liberty ROM.
Sent from my DROID3 using XDA App
zzandrewst said:
Will this method work with Liberty as well? I have never installed safestrap, but have bootstrap installed. I thought that I had read that safestrap does not work with Liberty ROM.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Afaik hashcode fixed safestrap to work with all roms
Sent from my XT860 using xda premium
Endoroid said:
Afaik hashcode fixed safestrap to work with all roms
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Great! I will give it a try, basically I would just install safestrap and use Liberty as my non-safe and then flash cm7 for my safe right?
Sent from my DROID3 using XDA App
zzandrewst said:
Great! I will give it a try, basically I would just install safestrap and use Liberty as my non-safe and then flash cm7 for my safe right?
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
you can't flash nonsafe with safestrap. Gotta use a bootstrap to flash your nonsafe, then install safestrap for flash safesystem. But yes, i have liberty as my nonsafe and ics as my safe
Last time i tried to install MAVROM using CWM, i got the following error:
E:signature verification failed
when updating zip from card.
Installation aborted
what to do?
I dont have the INSTALL from zip option, just UPDATE from zip.
that why i used safestrap.
but if I want to install the boot animation from RAZR, now in which location shall I do that? it used to be in /system/media folder. still there?
thank you, i managed to install both one successfully.
bogdan_wrc said:
Last time i tried to install MAVROM using CWM, i got the following error:
E:signature verification failed
when updating zip from card.
Installation aborted
Click to expand...
Click to collapse
I think thats because you tried to flash using original recovery, you said something with -+ volume buttons?
Please be careful when doing this. While you "can" run 2 custom roms at once it is not what the safestrap system is designed for. Your non-safe rom should be stock and unaltered as it is what will save you from a fastboot flash should your safe rom go bad.
Sent from my HP Touchpad using Tapatalk.
calash said:
Please be careful when doing this. While you "can" run 2 custom roms at once it is not what the safestrap system is designed for. Your non-safe rom should be stock and unaltered as it is what will save you from a fastboot flash should your safe rom go bad.
Sent from my HP Touchpad using Tapatalk.
Click to expand...
Click to collapse
Well there's no reason to have the stock rom on non-safe "in case things go bad" because you can also just use "easy unbrick" which will put your phone back to stock just as fast as switching from safe to non safe.
As said before the only reason where this would be handy is when an official OTA is released, although i heard you need to uninstall safestrap for it to work
calash said:
Please be careful when doing this. While you "can" run 2 custom roms at once it is not what the safestrap system is designed for. Your non-safe rom should be stock and unaltered as it is what will save you from a fastboot flash should your safe rom go bad.
Sent from my HP Touchpad using Tapatalk.
Click to expand...
Click to collapse
Really a fastboot flash isn't such a big deal. I've done it more times than I can count. Takes 10 minutes. Id rather have my fav rom in nonsafe so I can use safe to testing new roms and new ics builds
Sent from my XT860 using xda premium
Is this dual boot system possible for my phone ? I would like to switch froyo and cynaogenmod !
Sent from my Optimus Me using XDA App
DoubleYouPee said:
Well there's no reason to have the stock rom on non-safe "in case things go bad" because you can also just use "easy unbrick" which will put your phone back to stock just as fast as switching from safe to non safe.
As said before the only reason where this would be handy is when an official OTA is released, although i heard you need to uninstall safestrap for it to work
Click to expand...
Click to collapse
I think you miss a key point. When you boot safestrap it starts in the non-safe system no matter what you do. Depending on your mode it then moves you to a totally separate partition on the device, preventing you from doing any harm to the boot rom.
The non-safe is key for the entire system to work. Yes it can be any rom, but you do put yourself at risk of losing two installs, including all the data.
Easy unbrick may be as fast to get to stock, but to rebuild back to where you were is going to take a lot longer.
In the end I am just advising caution, not telling people what to do. It does go against what the system was designed for and people should be aware of that before jumping off the ledge.
I understand, but now I have to go back to bootstrap to do essentially the same thing
Not sure if I follow you..
If you are only working in Safe-mode Rom the worst you can do is blow that rom up. Fixing it is just a matter of restoring your last backup via Safestrap recovery.
The problem with working in non-safe rom is that you can blow up both and lose your recovery. From that point you have to do Fastboot, install bootstrap, restore non-safe backup, install SafeStrap, restore Safemode backup.
Unless I am not understanding you correctly.
I've been struggling installing custom roms on my phone so I figured I'd document the process to help out anyone else starting out. I'd like to thank everyone for helping me figure this out and for the hard work of the community for making this possible.
Edit: My goal was to come up with a way to install CM9 while leaving the original system it came with and all my settings and apps. I understand how to do TitaniumBackup and how to save specific apps/files to but I wanted an exact backup of my original system alongside any custom rom so I just wrote down the steps I used to make it happen.
Root the system
1.First apply one click root using this tool
Further instructions here: http://forum.xda-developers.com/showthread.php?t=1319653
http://dl.xda-developers.com/attach.../7/6/DooMLoRD_v4_ROOT-zergRush-busybox-su.zip
Droid 3 CWM (ClockWorkMod)
2. Install this apk onto the phone and click the first button then the second button
http://forum.xda-developers.com/attachment.php?attachmentid=882933&d=1328117678
3. Boot into recovery and make a backup of your system
4.Apply Fastboot package for UMTS XT860 Iusacell Mexico using RSD Lite 5.5
Further instructions here:
http://rootzwiki.com/topic/4370-sbf...959-and-56890/page__view__findpost__p__100987
XT860 Iusacell: http://www.fileserve.com/file/cgdZ2..._SLU-57M-111107-release-keys-Latam-01.xml.zip
RSD Lite: http://www.multiupload.com/T6NOEBKKLO
5. Reroot using 2.3.6 Zerg tool
Basically after flashing with RSD Lite then re-root using this tool:
http://dl.xda-developers.com/attach.../7/6/DooMLoRD_v4_ROOT-zergRush-busybox-su.zip
6.Re-install CWM (Droid 3 Bootstrapper from step 2) and then apply the Bell rar file as a nandroid restore.
Further instructions here: http://forum.xda-developers.com/showpost.php?p=21446640&postcount=112
https://rapidshare.com/files/1705579381/ClockworkMod_v.5.0.2.6_Bell_2.3.6.rar
7. Reboot into the system and let the OS load again then re-install cwm (no need to reroot) and reboot back into recovery.
the trick to booting into recovery the second time is to turn the phone off, hold the m key while pressing the power button, plug in the phone to usb, choose bp tools
source: http://forum.xda-developers.com/showpost.php?p=21474818&postcount=120
restore your original backup from step 3 using advanced restore and restore the Data only and then wipe cache and dalvik cache
8. Remove CWM and install safestrap instead it involves using adb shell and removing certain files instructions found here:
http://www.droidforums.net/forum/dr...d-help-removing-clockworkmod.html#post1801072
9. Install SafeStrap once CWM is removed just install it, reboot and press the menu key while booting
http://dl.xda-developers.com/attach...5/7/9/2/5/Droid3_Safestrap_Tweaked_v1.08d.apk
10. ICS Install, at this point you have prepped your system so you can install CM9 otherwise it won't boot on the stock Bell 2.3.4
Instructions here: http://forum.xda-developers.com/showpost.php?p=22254669&postcount=61 (start at step 8 or 9 in those instructions)
-Apply CM9 Alpha 6 Zip
http://www.hash-of-codes.com/files/cm9-droid3-20120130-1730.zip
-Apply XT860 Sub-Patch (by Rick#2) for ICS Zip
http://bit.ly/Ah5b6d
Further instructions here: http://hash-of-codes.blogspot.com/p/how-to-safestrap.html
Great tutorial
As a note, in step 6, you could flash any custom rom to /system. You might not be able to restore /data though. Can try and if no go do a data wipe. If you backup apps with titanium backup and call logs/sms/mms with mybackroot its not such a big deal. Just redownload those 2 apps and restore everything(honestly I rarely nandroid, only if im doing something im confident will end in a fastboot flash, I just use those 2 apps). Im running liberty in /systemorig and eclipse in /system
Sent from my XT860 using xda premium
Also zergrush should root anything I believe 2.2.x and up. You could save the hassle of getting one click. AFAIK anyways. When I first rooted I used the one click as well(way back when it first came out)but I know it roots 2.3.5 and 2.3.6 and works on other models as well. Originally for one of the Sony experia phone
Sent from my XT860 using xda premium
Endoroid said:
Also zergrush should root anything I believe 2.2.x and up. You could save the hassle of getting one click. AFAIK anyways. When I first rooted I used the one click as well(way back when it first came out)but I know it roots 2.3.5 and 2.3.6 and works on other models as well. Originally for one of the Sony experia phone
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Thanks for the tip I wouldn't have been able to get this far without your help Endoroid. I'll edit the How-To to use the same root twice, I wish mods would sticky more useful posts like zerg's root instead of pete's root and How-To such as this one.
Thanks for the detailed tutorial. I'm on Bell 2.3.6, rooted. Step 2 did not work for me. I could install the program (droid3 CW bootstrap) and click the first button (with "success" popup), but reboot into recovery would not work. It would simply boot up normally. If I held "m" down then I could get to the blackscreen menu, scroll down and select BP tools, but still, a normal bootup would follow.
I used root explorer to check for what the bootstrap program did. In /system/bin/ directory was the "hijack" file as well as a modified "logwrapper" and the original "logwrapper" which was renamed to "logwrapper.bin". Uninstalling the bootstrap did not remove these. To manually uninstall, I removed hijack, logwrapper and renamed logwrapper.bin to logwrapper.
I also tried Koush's Rom Manager from the Market and selected "Droid 3" as the device, but it also would not achieve a boot into CWM Recovery menu.
I tried the two programs separately and then together, but it made no difference.
My next step was to try Safestrap Recovery v1.08 from hash-of-codes. This installed and has allowed me to boot into the green recovery menu after powering down fully, holding "m" and pressing the power button. On the next black screen, scrolled down to "bp tools" with volume down button and then pressed volume up to select it. I went into "backup and restore" and created a nandroid backup of my current 2.3.6 Bell system. (volume up/down to scroll, power button to select).
Sorry if I'm being verbose with the button presses but thought it might help for future reference and maybe for others as well.
Question now is which step to go to now... do I try using RSDLite to flash the fastboot package for Iusacell Mexico file? If I understand correctly, this will change the radio and also there is no going back at this point to stock Bell.
I'm concerned about warranty service if something goes wrong and there's no still no Bell SBF to flash back to stock. Would it be that noticeable? If I restored my nandroid backup, would I still be on the upgrade path with Bell? If I restored the backup and deleted safestrap recovery, would it show?
ncho2233 said:
Thanks for the detailed tutorial. I'm on Bell 2.3.6, rooted. Step 2 did not work for me. I could install the program (droid3 CW bootstrap) and click the first button (with "success" popup), but reboot into recovery would not work. It would simply boot up normally. If I held "m" down then I could get to the blackscreen menu, scroll down and select BP tools, but still, a normal bootup would follow.
I used root explorer to check for what the bootstrap program did. In /system/bin/ directory was the "hijack" file as well as a modified "logwrapper" and the original "logwrapper" which was renamed to "logwrapper.bin". Uninstalling the bootstrap did not remove these. To manually uninstall, I removed hijack, logwrapper and renamed logwrapper.bin to logwrapper.
I also tried Koush's Rom Manager from the Market and selected "Droid 3" as the device, but it also would not achieve a boot into CWM Recovery menu.
I tried the two programs separately and then together, but it made no difference.
My next step was to try Safestrap Recovery v1.08 from hash-of-codes. This installed and has allowed me to boot into the green recovery menu after powering down fully, holding "m" and pressing the power button. On the next black screen, scrolled down to "bp tools" with volume down button and then pressed volume up to select it. I went into "backup and restore" and created a nandroid backup of my current 2.3.6 Bell system. (volume up/down to scroll, power button to select).
Sorry if I'm being verbose with the button presses but thought it might help for future reference and maybe for others as well.
Question now is which step to go to now... do I try using RSDLite to flash the fastboot package for Iusacell Mexico file? If I understand correctly, this will change the radio and also there is no going back at this point to stock Bell.
I'm concerned about warranty service if something goes wrong and there's no still no Bell SBF to flash back to stock. Would it be that noticeable? If I restored my nandroid backup, would I still be on the upgrade path with Bell? If I restored the backup and deleted safestrap recovery, would it show?
Click to expand...
Click to collapse
First, you may wish to just go with safestrap and try flashing g rom in safe mode. If it bootloops no harm done because your bell /system is intact
If that fails you can try using motofastboot instead of rsdlite to just flash /system. You can restore your /system with your nandroid.
As far as I know roms should work with bell 2.3.6.
If you do end up flashing the whole fastboot package with rsdlite you can make your phone appear to be bell stock. You can restore your nandroid and then mod the build.prop so about phone shows bell info. The warranty guys would have to look deep to see its been changed.
Its up to you ultimately but as I said I don't think you would have to flash the fastboot. Safestrap should work as is on bell 2.3.6. As long as you don't mess with /systemorig (nonsafe mode) its easy to remove the evidence. Uninstall safestrap recovery and remove su/superuser
If I recall correctly dasilva had his issue due to being on 2.3.4 and unable to update.
Sent from my XT860 using xda premium
Thanks Endoroid. I went ahead and tried installing Rick#2's latest patched version of CM9 and to my great surprise it worked and the phone has booted up running ICS. I'm pretty happy since I didn't think this was possible without losing the ability to get back to Bell stock and right now, I think it's still possible since I didn't flash any other country's fastboot files. Is this right?
ncho2233 said:
Thanks Endoroid. I went ahead and tried installing Rick#2's latest patched version of CM9 and to my great surprise it worked and the phone has booted up running ICS. I'm pretty happy since I didn't think this was possible without losing the ability to get back to Bell stock and right now, I think it's still possible since I didn't flash any other country's fastboot files. Is this right?
Click to expand...
Click to collapse
Correct
Safestrap was built with the idea of keeping your phone intact. You can still easily receive OTA updates and can return your phone to stock if you need to get warranty repair done
Sent from my XT860 using xda premium
dasilva333 said:
XT860 Iusacell: http://www.fileserve.com/file/cgdZ2..._SLU-57M-111107-release-keys-Latam-01.xml.zip
Click to expand...
Click to collapse
This file is necessary, but alas fileserve is gone... All the links on the web point to just that one location.
Does someone have it? Can someone upload it?
白い熊 said:
This file is necessary, but alas fileserve is gone... All the links on the web point to just that one location.
Does someone have it? Can someone upload it?
Click to expand...
Click to collapse
+1
1of16 said:
+1
Click to expand...
Click to collapse
Personally, I like the Bell version the most, it has the least amount of Blur. You can find an entire SBF database here:
http://sbf.droid-developers.org/
Sent from my XT860 running ICS
danifunker said:
Personally, I like the Bell version the most, it has the least amount of Blur. You can find an entire SBF database here:
http://sbf.droid-developers.org/
Sent from my XT860 running ICS
Click to expand...
Click to collapse
Thanks, and I can use it on my XT862 too?
is it possible to install the latest OTA (5.7.906), which I want to use as stock rom?
Hello everyone!
Iv recently acquired a new milestone 3, and after gettint out of the box only did the one click root service to root it up, and installed bootstrap / rom manger and so on. But when I power off the phone holding X I get into a ! triangle screen, which I cant even power down the phone via button.
Also booting with M, or both vol buttons I can get into a list of options, but recovery, bt tools or any other wont get into the recovery mode.
is there any other way? clockwork mod is already installed says the app, and the normal boot goes ok.
Iv downloaded from another post the CM7 which I wanna install, but impossible without the recovery mode.
any help appreciated, all Iv found in the forums was how to get into recovery, but none worked for me.
... never mind
If you are using cwm, make sure you are using the DROID 3 bootstrapper. There is no way to enter recovery without it.
Imo, you should use safestrap (the official version) . It's way better. Because the only way to get to recovery when you have cwm is the bootstrap app, if you bootloop your phone, the only solution is an sbf. Safestrap retains access to the custom recovery.
EDIT: I saw you installed the bootstrap. To get to recovery, open the app and click the reboot recovery option, then reboot your phone.
Sent from my DROID3 using xda premium
both options: bootstrap recovery and reboot recovery goes to normal boot into the OS.
since its a payd up app, already sent email to the devs so I can help troubleshoot whats going up on my device, but got no answer.
Odd. Make sure you hit bootstrap recovery, wait for it to say success, then hit reboot recovery.
Sent from my DROID3 using xda premium
I've had that.problem before with the bootstrap before. I could not get it to work no matter what. Rerooted, made sure I had su, busybox etc. Sbf'd and did it all again. Just use safestrap, it works. Just uninstall your bootstrap first
Sent from my XT860 using xda premium
http://db.tt/XzRiaG55
This is the modded version. Its supposed to be able to flash both safe and non safe modes but it doesn't. You can only flash in safe mode. But it does have a console included which can be handy. Its still cwm but redesigned ui. Note that if a rom isn't specifically meant for the xt860 you will need a patch for it. So far only eclipse 3.0 and mavrom 4.0 have xt860 version. I'll also find you the sbf for you. Always handy to have
Sent from my XT860 using xda premium
http://sbf.droid-developers.org/umts_solana/list.php
Choose the one for your carrier. If you are running windows you'll need rsdlite to use it. Just unzip the sbf somewhere on your comp and point rsdlite to the xml file in the unzipped folder. Make sure your battery is charged before doing this. And before flashing anything too. Just in case.
Sent from my XT860 using xda premium