Database Develop

CANT OC my device problem gingerxperia

i cant overclock my device with gingerxperia,its locked at 600 mhz
help please

nizoorox said:
i cant overclock my device with gingerxperia,its locked at 600 mhz
help please
Click to expand...
Click to collapse
i have same problem.
it let me check the OC box and click on overclock upto 8xx mhz when i exit settings and come back on it has reverterd back to 600 mhz. i also add OC module same problem i also use cpu master and that lock to 600mhz..
can no1 help

Raazax8 said:
i have same problem.
it let me check the OC box and click on overclock upto 8xx mhz when i exit settings and come back on it has reverterd back to 600 mhz. i also add OC module same problem i also use cpu master and that lock to 600mhz..
can no1 help
Click to expand...
Click to collapse
yes exact same problem for me,
i googled it and it says we have to upgrade kernel

Try copying OC module manually with Root Explorer.

Godra said:
Try copying OC module manually with Root Explorer.
Click to expand...
Click to collapse
done this. no good. this module i have found to work with every other rom i have use'd but no good for gxp
should not need custom kernal. if anything kernal cause more problem than good in this early stage of development

Are you using stock SE kernel or what?
Sent from my X8 using XDA App

nizoorox said:
i cant overclock my device with gingerxperia,its locked at 600 mhz
help please
Click to expand...
Click to collapse
@ALL with the problem.
Check your baseband in settings>>about phone.
it should read something like this >> M76XX-TSNCJOLYM-53404015
if it isn't, i'ved attached the latest X8 stock kernel. just unzip and flash with Flashtools.
Edit: I just realized you're using GingerXperia. this particular ROM checks your baseband and will not install unless you're on 015. so, this might not help. But, there's no harm in trying.

As a followup:
Since you're using GX ROM. that means you're, rooted, jitted and Xrecvr'd (CWM'd).
Next, is your bootloader unlocked? Did you load any of the custom Kernel? because if you did, the only overclockable Kernel right now is FXP OC Kernel.
The OC Module only work with the Stock Kernel.

if kernel doesnt support oc.you need to install oc module by yourself editing hw_config.sh and push the module to lib/modules.
The 'overclocking is a procedure that can hurt your loved x8 ergo follow this guide at your own risk!
requirements:
- Rooted
- Banda Basic x15
- SetCPU
1) Download x8oc V004 http://forum.xda-developers.com/atta...8&d=1302528982
2) Extract the file and copy it on the sd x8oc.ko
3) By RootExplorer x8oc.ko copied to / system / lib / modules
4) Always go through RootExplorer / system / etc, hold down the file menu and hw_config.sh which opens in selected Open Text Editor
5) At the beginning put this line
code:
insmod / system/lib/modules/x8oc.ko # x8 overclocking
6) Save the changes and restart the phone
hope i helped

xperiauser132 said:
if kernel doesnt support oc.you need to install oc module by yourself editing hw_config.sh and push the module to lib/modules.
Click to expand...
Click to collapse
As of now, there are no Custom KERNELS that support the OC, MDDI, UV and Gesture Modules, except the Stock KERNEL.
All Custom KERNELS, except FXP OC enabled KERNEL, have already embedded the aforementioned modules, except the OC module.
Most ROMS, except FXP, already have the Modules installed.
in short. Custom Kernels = no overclock
if you want OC and custom KERNEL then use FXP OC KERNEL.
The instructions provided above are for ROMS.

hi we got no custom kernal. my baseband has always been on xxx15 so no need to upgrade their for OC'ing. and to be honest we wouldn't even b able to have this rom on our phone if we didn't have that baseband.
@ nizoorox IGNORE everything the people have said to try and help. i already tried most of it anyway. no i am not unlock my bootloader and have custom kernal untill they are better developed.
NIZOOROX this is how we OC gingerXperia.. simple update to GingerXperia V010.
i did it last night and now i can overclock without doing anything special.
just go to cyanogen mod setting's - performance - cpu - then click overclock and select what Mhz you want t use

[Q] Best Kernel for GDX V017

need kernel that i can use with GDX v017 and can OC GPU and CPU..

Use stock kernel and add modules. Read 3 first posts of GDX and LDX threads.

How to O.C. with stock Kernel on dx v21

As the title say, how to overclock on the stock kernel, with dx v21 rom installed, and no unlocked bootloader. I see some are doing it from various screenshots but i seartched and can not find a solution.

Follow the instructions on this thread.

kaostechno said:
As the title say, how to overclock on the stock kernel, with dx v21 rom installed, and no unlocked bootloader. I see some are doing it from various screenshots but i seartched and can not find a solution.
Click to expand...
Click to collapse
Did you install addon modules for stock kernel from doixanh
If yes then go to setting-cyanogen setting-performance-tick on overclock and select frequency

Thank you i manualy pushed ocx8.ko and it works.!!!

[Q] nAa kernel installation

I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!

vicky6672 said:
I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!
Click to expand...
Click to collapse
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....

harshitgroup said:
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....
Click to expand...
Click to collapse
I have unlocked my bootloader, i just want to know that can I flash kernel with any rom installed, I have Froyopro, so can i flash nAa kernel, I am in stock kernek now

Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options

Bolussimo said:
Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options
Click to expand...
Click to collapse
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,

vicky6672 said:
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,
Click to expand...
Click to collapse
If you want to install MiniCM7, you need aNa kernel. unlocked bootloader=> flash aNa kernel=> install Roms!
Check the date of manufacturing first before unlocked bootloader, otherwise, it may break your phone!

As You can see at MiniCM's google page: http://code.google.com/p/minicm/ versions 6 supports stock SE kernel. If You want miniCM7 - it's neccesary to flash nAa kernel.
1). Download ROM and copy it on SD.
2). Flash nAa kernel.
3). Go into CWM recovery, which is built-in in nAa kernel and do full wipe.
4). In CWM Install custom.zip from SD card
If You install CWM7 without nAa kernel propably it won't start at all. And propably You will have to use SEUS to back to stock SE ROM, cause I think there will be no option to get into recovery

DualTouch FroyoPro in CM7 ?

Hello everybody, I wonder if it is possible to use dual touch ROM module (FroyoPro 2.5) in CM 7.2, the module of FroyoPro is softer and would like to use it!
grateful, sorry for bad English

nothing to do withe the Rom,
the digitizer: Synaptics or Cypress, depending how you have it, will dictate what module to use for DT:
- fake DT for synaptics by DX
- real DT for Cypress by AnDyX
You can take them from any Rom, but in order for them to work, they have to be "insmod" -ed into config....
Cheers,

Or you can insmod them in terminal every reboot. Trust me, that sucks.
And check which digitizer you have on your phone.
Sent from my W8 - yeah like I can use an abacus for this...

elderduke said:
nothing to do withe the Rom,
the digitizer: Synaptics or Cypress, depending how you have it, will dictate what module to use for DT:
- fake DT for synaptics by DX
- real DT for Cypress by AnDyX
You can take them from any Rom, but in order for them to work, they have to be "insmod" -ed into config....
Cheers,
Click to expand...
Click to collapse
if my "chip" is synaptics ... I just wanted to use the MOD's dual touch rom FroyoPro in CM 7.2 ROM v11 because of dualtouch Froyo is much better.
Chance?

brunin.mg said:
if my "chip" is synaptics ... I just wanted to use the MOD's dual touch rom FroyoPro in CM 7.2 ROM v11 because of dualtouch Froyo is much better.
Chance?
Click to expand...
Click to collapse
In Froyo ROM, go to /system/lib/modules and copy x8gesture.ko to your sdcard. In CM7 ROM, copy the x8gesture.ko from sdcard to /system/lib/modules, set correct permissions and reboot. Note that this will work only on stock kernel

fifo171 said:
In Froyo ROM, go to /system/lib/modules and copy x8gesture.ko to your sdcard. In CM7 ROM, copy the x8gesture.ko from sdcard to /system/lib/modules, set correct permissions and reboot. Note that this will work only on stock kernel
Click to expand...
Click to collapse
only works in the Stock Kernel? FroyoPro with kernel-Alfs_GDX v8a dualtouch also has the smoothest, can not leave the dualtouch calibrated the same way in CM 7.2 v11?