Related
After i custome upgrade follow this
http://forum.xda-developers.com/showthread.php?t=1373679
Now my phone is cannot turn one
Stuck at the opening screen Sony Ericson ><
did you unlock bootloader? and flash nAa kernel?
I think i din't do the unlock bootloader ><
But now i cant turn on my phone...
First time custome upgrade...
I so afraid now ;(
Just download flashtool from Xda and then flash the custom Rom. You will have to search these two on XDA.
Sent from my E15i using XDA Premium App
And don't worry. Solution exists .
Sent from my E15i using XDA Premium App
Don't afraid Your problem is very easy to solve
You can use some software to rescue you bricked phone like SEUS..., but I recommend WotanClient, it's fast and easy to use SEUS is very very slow
Or maybe you should read this first http://forum.xda-developers.com/showthread.php?t=1011071
Good luck
I will try my best to recovery it ><
Erm...
The GingerXepria v17 who have the step is very clear , clear and clear
I dun want later i try upgrade again fail again T_T
xEve95 said:
I think i din't do the unlock bootloader ><
But now i cant turn on my phone...
First time custome upgrade...
I so afraid now ;(
Click to expand...
Click to collapse
did u flash the rom wiff cwm recovery?
if u cant turn on ur phone then repair with SEUS or use flashtool
EDIT: SOLVED THANKS TO damir87
Ok guys, after a lot of research and messing up I ended up needing to ask for help.
I started trying to install cyanogen mod 9 (Android 4.0.3) where everything was going fine, but when I flashed the kernel with the "Custom Gingerbread kernel nAa-11" and installed the cyanogen 9 ROM with xRecovery, but when I started the phone (And it's still like this ATM) after the Sony Ericson logo, it appears the XPERIA logo with the lighting animation, it does the animation about 3 - 4 times and freezes after that and stays there, sometimes it does the animation 3 times, disappears and appears the logo again and then freezes.
I realized this happened because I didn't unlock bootloader. I can actually check the bootloader and I get the message that says it's locked but you can unlock it but to unlock it I have to have it turned on with USB debugging on.
Also, sometimes when I try to flash it again, after connecting it and the green light turning on it says I have plugged the device in flash mode, then it says I unplugged it and tells me that an error occurred, then the phone boots up by it-self.
BTW I'm a bit newbie in the section of "flashing" and the kernel and the baseband stuff, I'm not sure if with flashing, you flash the kernel, the baseband, or the ROM it-self, or even if you can install a ROM with the flashtool with the phone on flashmode.
BTW I can't access xRecovery.
- SEUS Says my phone is already up to date and all I can do is click finish.
- PCC Says there's not software available for my phone.
WHAT WOULD BE PERFECT TO FIX THIS:
A way to change the ROM to the android 2.1.1.C.0.0 without booting the phone(in flash mode).
HOW I SOLVED IT
-I simply downloaded this stock ROM (2.1.1.C.0.0): http://www.mediafire.com/?eca0sualnao4c4c
-Then just used flashtool V0.2.9.1 (I think it's important that you use that exact version): https://rapidshare.com/#!download|5...|62602|R~5490459C5764641D4665C046409A620A|0|0
(Sorry for rapid**** host, couldn't get any better)
After that it took the phone about 5~ mins to start up after the 2nd SE logo.
Again thanks to damir87!
I was newbie too , but reading threads helped , use SEUS Sony PC Companion to restore to stock.
Sent from my X8 using XDA
CosminAdriaan said:
I was newbie too , but reading threads helped , use SEUS Sony PC Companion to restore to stock.
Sent from my X8 using XDA
Click to expand...
Click to collapse
Thanks for the reply, but Sony PC Companion needs the phone to be ON and on debug mode, actually I can't fully boot the phone and SEUS gets stuck on "checking connection to the phone" or something like that.
Also PCC says there's no available updates for the phone. <.<
Turn off phone , then do what seus asks
Sent from my X8 using XDA
CosminAdriaan said:
Turn off phone , then do what seus asks
Sent from my X8 using XDA
Click to expand...
Click to collapse
The PC companion says there's no software for my phone and,
the SEUS says my phone is already up to date.
When i used seus i had right down a button option to reflash.
Sent from my X8 using XDA
CosminAdriaan said:
When i used seus i had right down a button option to reflash.
Sent from my X8 using XDA
Click to expand...
Click to collapse
You mean on the SEUS software? I only get this:
i742.photobucket. C 0 M /albums/xx68/CHAPI92/SEUS.gif
Sorry I can post the link because I don't have 8 posts... <.<
Please copy the link and change the " C 0 M " with "com".
I see , try another version of Seus..
Sent from my X8 using XDA
CosminAdriaan said:
I see , try another version of Seus..
Sent from my X8 using XDA
Click to expand...
Click to collapse
Like 2.7.12.4?
EDIT: I downloaded 2.7.12.4 and it says it cannot check the software version and it won't start.
I need to somehow fix it without SEUS/PCC
BUMP
Any other ideas please?
Dammit , no , im out of ideeas
Sent from my X8 using XDA
Anyone else could help please?
BUMP
Still need help :\.
BUMP
guys, problem haa!?
flash this with flashtool and all over again.. rooting, recovery, baseband.. THEN you can install custom rom mate, and if you wanna flash custom kernel read some stuff before! its not so complicated if you know what you doing!
damir87 said:
guys, problem haa!?
flash this with flashtool and all over again.. rooting, recovery, baseband.. THEN you can install custom rom mate, and if you wanna flash custom kernel read some stuff before! its not so complicated if you know what you doing!
Click to expand...
Click to collapse
Even I HATE rapidshare, hotfile, depositfile, share and uploading, I'll trust you and hope it works .
With this you say it'll do everything?
Even the rooting while on flashmode? and instal xRecovery?
Remember I can't access the phone.
BRB In 3 hours with the ****ty 30kb/s, gonna practice shuffle.
This file is stock 2.1 for x8 so when you flash this your phone will not be rooted and will not have recovery installed, thats you gonna do after flashing stock rom! btw B.Jay is write nice and detailed tutorial so you can follow these steps to make your phone work!
damir87 said:
This file is stock 2.1 for x8 so when you flash this your phone will not be rooted and will not have recovery installed, thats you gonna do after flashing stock rom! btw B.Jay is write nice and detailed tutorial so you can follow these steps to make your phone work!
Click to expand...
Click to collapse
Oh, ok great, and when flashing this it will install the default ROM and remove the android 4.0.3 ROM right?
EDIT: I already did that tutorial, when I tried to flash the phone with the 2.1.1.C.0.0, it gave me an error saying it can't prepare the files for the flashing, any idea?
PvM Chapi said:
Oh, ok great, and when flashing this it will install the default ROM and remove the android 4.0.3 ROM right?
EDIT: I already did that tutorial, when I tried to flash the phone with the 2.1.1.C.0.0, it gave me an error saying it can't prepare the files for the flashing, any idea?
Click to expand...
Click to collapse
Re-download...
Sent from my E15i using xda premium
Did you try PC Companion to repair the phone?
If so... do you know how to do that? I'm saying this because I bricked my phone once and I didn't knew hot to use th "repair" option. Only after a big search I found a step by step tutorial on how to do that...
Hi I have SE xperai x8 with unlocked bootloader and gingerdx v.26 with alfs kernel. I didnt have any problem for 2 or 3 monthssince i use gingerdx v26. But Today while i was listening to music suddenly i noticed taht my signal strenght bar became gray with "x" above the bar like there is no signal.. So thats what it said on signal.I had perfect signal and suddenly it lsot the signal. I have been waiting for 2 hours still no signal. Tried to change the sim card still the same. I went to the options to see if the unlocked bootlaoder is the reason but no it doesnt find any mobile networks... You see here in Bulgaria we have 3 mobile networks it always find the 3 of them but now it doesnt find anything. Also the GPS doesnt detect any GPS Satellites!
Did you flashed addons ?? maybe that can help
Or else reflash rom and proper kernel
lol
androidnerd2 said:
Did you flashed addons ?? maybe that can help
Or else reflash rom and proper kernel
Click to expand...
Click to collapse
thought about this mate but i barely think its software problem because it wall happend suddenly. You see i have never had problems with this core or rom. Moreover when its a software problem it usually finds the networks but cant access them its different here whe n iclick to search for networks it sohudl find 3 but it donst find even 1. Also mobile network stopped working with the no signal bug and gps tooo...
lol
By the way i tried reinstalling the rom + addons still doesnt work...
df
Please help mee :x::x i am desperate. NOw i tried older versiosn of the rom different kernels doesnt work just saying no signal..
Try reverting back to stock ROM after flashing stock kernel
ad
Mayank77 said:
Try reverting back to stock ROM after flashing stock kernel
Click to expand...
Click to collapse
i will try but i am scared taht i t could be a hardware problem :SX
maybe for the last option dude
Flash the kernel and ROM again..
just do it..and dont forget to backup first
than restore your data NOT your system
I have that prob last month when I was installed miniCM 2.2.1 and after I flash both, the signal work normally again :laugh::laugh:
Just try!
loll
Now I installed the new GingerDX but i dont ahve any status bar but nvm still doesnt have signal because i tried to callsomeone it said no mobile networks or sth like that
rty
my speakers are making the strange noise that occur when someone is calling you on the phone liek its looking for signal but doesnt fidn any signal..
lol
OH MY GOD HELP I relocked my bootlaoder accidently while in alfs kernel now it cant booti t stays bacl screen and jsut vibrates whe ni click the button but than nothing. When i try to flash sth it enters flash mode and restarts after 2 seconds and keeps restarting :X while in flash mode and cant boot
gh
ok i ****ing restored the stock kernel and rom somehow still not connection to a mobile network! PLEASE HELP I AM WITH STOCK KERNEL AND ROM NOW AND STILL DOESNT WORK!
xc
Please help :x
Probably won't work but it's worth a try:
Try repairing your phone using PCC. or SEUS. disclaimer though, i have no experience with unlocked x8 bootloader.
Sent from my X8 using xda premium
ow gosh!
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. prepare your flashtool and s1tool
3. make sure if your baseband is 015 and phone type is not 11w29+ !!!
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool
7. flash the latest kernel (nAa or alfs)
8. backup
9. factory reset, wipe data, etc
10. Flash ROM (minicm or Gdx)
DOne!
1.relock bootloader with setool.
2. unlock bootloader with flashtool
3. this is it.
4. must work!
Plzzzz help me out.........................i jst bought new Xperia X8. And decided to unlock the bootloader.i used msm7227_semc....After using it my Network signal or Bar has red X sign on it..i hv tried relocking but still.pls help me :crying:
Here's a guide to unlock bootloader using flash tool as matej2010 suggested..
http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
sidhart said:
Here's a guide to unlock bootloader using flash tool as matej2010 suggested..
http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
Click to expand...
Click to collapse
i hv already gone through that process...when i used da s1tool i had "NOT RECOGNIZED SIM LOCK CERTIFICATE".....and i continued by using the "msm7227_semc"..i turned da phone on and realised that the sim network is not working..but the phone bootloader waz unlocked.
Try relocking you're bootloader..
First get stock 2.1 back on you're phone as guided in the link posted then as 2010matej stated above relock you're bootloader using s1tool and then try unlocking you're bootloader using flashtool as in the guide and ya before unlocking check sim ock certificate..
Sent by the walking walkman..
hello there guys , i have one sony ericsson xperia x8 and i wear the ginger dx rom . i had some problems and i decide to put the minicm10 . i installed it but before the mobile open , it stucked at the sony ericsson logo . I cant turn it on or put it at cwm ,
please i need your help because my wife will kill me.
se logo? it means you're on stock kernel. the rom requires a custom kernel for it to work. use pcc to repair your phone.
Sent from my rooted tomato using tapatalk
ok but my phone didnt start so the pcc doesnt start too , the phone stucks at the sony ericsson logo before it opens. any ideas for the pcc?
edit* when i connect the phone to the pcc , at the beggining the pcc recognize the phone but after 2-3 sec the phone disconnects.
loretzos said:
ok but my phone didnt start so the pcc doesnt start too , the phone stucks at the sony ericsson logo before it opens. any ideas for the pcc?
Click to expand...
Click to collapse
install pcc.
download flashtool.
download x8/w8 stock rom.
install drivers in flashtool's /drivers folder.
run flashtool and follow the instructions.
you'll be back on stock rom without root access.
Sent from my rooted tomato using tapatalk
Hi,
Don't worry you can easily fix your phone.(y u afraid your wife?? Lol, typical husband )
Follow the instructions of the second post in this ↓ thread to fix it.
http://forum.xda-developers.com/showthread.php?t=1481630
When you want to install a new rom its very important to read the installation instructions
stamatis said:
Hi,
Don't worry you can easily fix your phone.(y u afraid your wife?? Lol, typical husband )
Follow the instructions of the second post in this ↓ thread to fix it.
http://forum.xda-developers.com/showthread.php?t=1481630
When you want to install a new rom its very important to read the installation instructions
Click to expand...
Click to collapse
thanx my friend.. my wife is smiling!
loretzos said:
thanx my friend.. my wife is smiling!
Click to expand...
Click to collapse
Dude you may want to report your wife to the police,how can you live with the danger of killing you???
Lol,I'm kidding of course,I'm glad I helped you and I'm glad I made your wife smile
Why did my phone shows no service on the screen,but i already insert sim card.this happens after i upgrade my xperia x8 into ICS using MiniCM9.
PLEASE SOMEBODY HELP ME :crying: :crying:
hotkeww?? said:
Why did my phone shows no service on the screen,but i already insert sim card.this happens after i upgrade my xperia x8 into ICS using MiniCM9.
PLEASE SOMEBODY HELP ME :crying: :crying:
Click to expand...
Click to collapse
Try rebooting your phone.. if doesnt work remove the back cover and reinsert the sim card....if the problem persists try changing back to gingerbread or stock sony eclair....:highfive:
hotkeww?? said:
Why did my phone shows no service on the screen,but i already insert sim card.this happens after i upgrade my xperia x8 into ICS using MiniCM9.
PLEASE SOMEBODY HELP ME :crying: :crying:
Click to expand...
Click to collapse
Dont forget to insert your simcard while flashing kernel n ROM
hotkeww?? said:
Why did my phone shows no service on the screen,but i already insert sim card.this happens after i upgrade my xperia x8 into ICS using MiniCM9.
PLEASE SOMEBODY HELP ME :crying: :crying:
Click to expand...
Click to collapse
You need to relock your bootloader first ..then flash stock 2.1 ..on your phone and see if your network working ..if working you can continued to upgrade ..mine works with this .
Press thanks if i helped you ..
no need to relock, you can just flash the 2.1 stock firmware directly from the flashtool