Database Develop

TweakUI - Power Management settings?

HI,
I've done some searching on the forum but can't find a good explanation of the Tweak UI .0.2.3 settings. I see SDMemory_Class, MMC_Class Asyncmac, l2tp, pptp, irsir. what do these mean, when do you use them and to what benefit. A good answer to these questions would be great.
oh yeah, aand who is the dude on the about screen.
Thanks!

I'd also like to know this. Am searching but finding nothing

me tooooo!
Any experts listening ???
dev

SDMemory = Secure Digital Memory Card
MMC_Class = MultiMedia Card Class
Asyncmac = MS Remote Access serial network driver
L2TP = Layer 2 Tunneling Protocol, tunneling protocol used to support virtual private networks (VPN)
PPTP = Point-to-Point Tunneling Protocol, method for implementing virtual private networks
IrSIR = Infrared Serial Driver
Guy on info page = Bill Gates friend?

Linksys WVC54GC IP cam on Kaiser...working (Infrastructure or Ad-Hoc)

OK, this method was tried with a WVC54GC v1.1 with firmware V1.21.
We will have to see if video stream is same for earlier versions!!
Have TCPMP installed. (latest version)
Connect your WVC54GC cam to your network with open view access in setup (that is NO PASSWORDS) for basic view, not tried peer to peer yet cause its late and kn..tired).
Make a WiFi connection from your phone to the same network.
Open TCPMP, select 'File' 'Open file' and type into the top field http://the.cam.ip.add/img/video.asf where 'the.cam.ip.add' is the network address of the camera (of course )
I saved my links in a directory called Cam Links (as 'whatever.cam instaed of .txt) using Activesync then used Resco explorer to link them to a TCPMP ( IE open these with!!) upload for automatic viewing!
Hope it works but expecting lots of queries...
OH BTW, there is about a 10 second delay on my setup but HEY, who cares cause the vid quality is great?

One other thing...
Make sure you hit the pause button before you shut down TCPMP as it tries to open the camera on next load.

OK, here is a method to connect it peer-to-peer (direct connect with no hub)
Get it up and working as in the first method.
Change your camera wireless settings (New SSID, fixed IP (Ex 192.168.1.115 subnet 255.255.255.0) and Ad-Hoc (peer to peer).
You will have to also edit the security settings for wireless as this camera can only use WEP in Ad hoc.
Select 128bit encryption and enter a 5 character passphrase, hit generate and make a note of this long hex string and select shared key.
On your phone, go to 'Settings' 'Connections' 'WiFi' and on the Network adapters tab, select WiFi and set for 'Use specific IP address and enter something close to your camera (Ex 192.168.1.110 subnet 255.255.255.0) click OK, then under the Wireless Tab 'Networks to access' select 'Only computer to computer' you should then see your camera.
Click connect and enter the hex string you made a note of from the camera encryption, be sure to select 'Shared' and it should connect.
Follow the instructions for TCPMP as in first post and you should have a fully portable WiFi camera (apart from the mains adapter!) to take around with you.
If you need to go back to Standard WiFi use, you only have to re-select 'All available' under Networks to use and under Network adapters re-select 'Use server assigned IP'
Enjoy.

This method should work for all Linksys cameras and just about any camera if you can identify the jpeg or mjpeg video output stream (ie. http://the.cam.ip.add/img/video.asf in first post)
Anyone tried this yet?

it works for me
It work for me. i use orb too.

Wm6 Remote Access Error

Had to Remote access a SBS 2003 Server from my Vario III "for real" the first time today.
Seems if you use the on screen keyboard (large Keys - No numbers showing), when you press the 123 button to access the numberpad, the numbers don't work on the destination machine. (Update: The 1 does, not no others)
Tried with Small keys (Number showing) and the PCM Keyboard - same effect - only the "1" transmitted, all other number keys are inoperable.
Same goes for using the real keyboard, as the Fn button has to be used, and this seems to affect the remote access (ie no numbers appear)
As I use complex passwords, I had to enter these on the application page before connecting - no problem there, but not being able to type numbers when connected is no good.
Any ideas - there doesn't appear to be an about/version screen on WM6 Remote Access.

Bump!
Has anyone got Remote Access to work AND type numbers?

Usb Gamepad Working!!!!!! Andres Ortega First!!!

IVE MADE USB GAMEPADS WORK ON OUR PHONE!!!!! now you can play your nintendo, super nintendo, genesis and playstation emulators on your T.V. and have a matching remote to boot.
You will need the following:
Registry Editor
Hidgamep.dll file (included)
4 in1 cable (and usb gamepad ) any with 1 joypad will work.
1. you will need to unzip the hidgamep.dll file into your windows directory on your phone.
2. open your registry editor, and find the directory [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default
3. add the value "1_5". ( dont put the "")
4. open the value 1_5 and add the value "gamepad" ( dont put the "")
5. now add the key "hidgamep.dll" ( dont put the "") (this step makes windows use the driver)
6. save your work remove the usb device and reboot your phone.
7. now if you did this right, when you plug in your usb game pad it should give you a message. now all you have to do is set the buttons on your emulator and your off to gaming like a pro!!!!

Questions? email me
If you have any questions please email me at: [email protected]
if you want any other help also email me.

Where do you get a usb game pad? Kind of lost here. Seems interesting though.

it would be nice if you can port USB MassStorage Driver into Athena~

rickyrvl said:
it would be nice if you can port USB MassStorage Driver into Athena~
Click to expand...
Click to collapse
it already has this ??? but there is a size limit

where can u find the playstation emulator

Very interesting! Great work!
Does a normal USB-keyboard work with this?
(And is there a way to use localized keyboards with the Athena?)

Think I shall give this another try
I found the .dll on another forum a while ago but could not get it to work but might of been a very very ancient copy but I think I shall give this a try again, a couple of quick questions do you know how many buttons the .dll supports? And also does it map the pad to the standard joystick layout for games that do not allow you to reconfigure the keys?
If all goes well might consider getting one of these http://www.geniusnet.com/geniusOnli...50&_pageLabel=productPage&test=portlet-action

cuba3377 said:
IVE MADE USB GAMEPADS WORK ON OUR PHONE!!!!! now you can play your nintendo, super nintendo, genesis and playstation emulators on your T.V. and have a matching remote to boot.
Click to expand...
Click to collapse
Do you know if this work on other WM devices too? I might try it next week if you are not sure.

My guess is "no" since it requires a USB host which only Advantage has...

update
this driver supports 2 axis controller and up to 8 buttons.

kareem9nba said:
Where do you get a usb game pad? Kind of lost here. Seems interesting though.
Click to expand...
Click to collapse
you can get a universal usb gamepad anywhere. i got mine at superwalmart 9 bucks

rickyrvl said:
it would be nice if you can port USB MassStorage Driver into Athena~
Click to expand...
Click to collapse
the driver for a mass storage device is already installed. i looked into it. the thing is that the battery on a phone is about 3.7v. a regular usb port has alot more than that. dont expect to power a hard drive with such low current. the drivers are installed so if you use thumb drives or multi usb port drives it will work.

irus said:
where can u find the playstation emulator
Click to expand...
Click to collapse
search google for ps emulator windows mobile fpsece

Moskus said:
Very interesting! Great work!
Does a normal USB-keyboard work with this?
(And is there a way to use localized keyboards with the Athena?)
Click to expand...
Click to collapse
the driver is already preinstalled with windows mobile 6. aslong as the current draw of the keyboard isnt more than 3.7 v

Oberth said:
I found the .dll on another forum a while ago but could not get it to work but might of been a very very ancient copy but I think I shall give this a try again, a couple of quick questions do you know how many buttons the .dll supports? And also does it map the pad to the standard joystick layout for games that do not allow you to reconfigure the keys?
the reason it didnt work is because the buttons need to be maped correctly. all my driver does is tell the pda what we want it to do when you press buttons. the axis is the directional keys on the board.
if you did want to reconfigure the map. its just plug n play with the driver, just remove the current mapping and add the keys you want to the driver. also u will know when u did it right because you will get a pop up box
Click to expand...
Click to collapse

It works
Hi Cuba337,
Got it sussed and now it works with a couple of joypads might get the one I linked above now. For anyone else trying this and getting stuck I found you need to tweak the intructions given.
Step 3, Add a new KEY named "1_5" (ignore the " ")
Step 4, Add a new KEY named "gamepad"
Step 5, Add a new STRING value called "DLL"
Step 5a, edit the value and enter "hidgamep.dll"
And that does the trick for me did not bother reseting the phone just plugged a pad in and it worked. It works with both my genuine HTC 4-in-1 cable and my no name 7500 dock with 2 usb ports on the side. It does feel a touch unresponsive but the only digital gamepad I have laying around is rather shoddy and my other spare pad has analogue pads which it's not keen on either so will get new pad and see what happens, will also see if the new PK4.0 rom helps when that comes out.
Thanks Cuba337

cuba3377 said:
IVE MADE USB GAMEPADS WORK ON OUR PHONE!!!!! now you can play your nintendo, super nintendo, genesis and playstation emulators on your T.V. and have a matching remote to boot.
You will need the following:
Registry Editor
Hidgamep.dll file (included)
4 in1 cable (and usb gamepad ) any with 1 joypad will work.
1. you will need to unzip the hidgamep.dll file into your windows directory on your phone.
2. open your registry editor, and find the directory [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default
3. add the value "1_5". ( dont put the "")
4. open the value 1_5 and add the value "gamepad" ( dont put the "")
5. now add the key "hidgamep.dll" ( dont put the "") (this step makes windows use the driver)
6. save your work remove the usb device and reboot your phone.
7. now if you did this right, when you plug in your usb game pad it should give you a message. now all you have to do is set the buttons on your emulator and your off to gaming like a pro!!!!
Click to expand...
Click to collapse
nice job... just one question does it work with any game pad?

Awesome job
Thanks for the .dll posting and the notice to get things working for the gamer in all of us
Can you post links to the set of utilities that you are using? A consolidated list of game emulators and versions that support the config that you are using and talking about?
I have all of the older emulators, but I have had trouble getting many of them to work in REALVGA mode. Do you have yours working in VGA mode? Since you have a working solution it would be really really cool to get all of the links from you for the solution that you have put together. I would personnally be grateful for the time saved from testing unknown configurations...
Thanks,
Bob

Auto Config File For The Dll
Instead of asking for it I am deciding to post it. LOL
Create a .REG file and place this into it's content.
Code:
[HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_5\gamepad
"DLL"="hidgamep.dll"
Place the file on your device and run it. I don't know if the run method works as it should on
a windows pc but it should in theory. After a successful merge of the file you may delete it.
Personally I would place it in the DLL's zip file so it does not get lost for future installations.
If there is a CE Hacker out there looking for an example to follow you might want to
consider the following information taken from windowsfordevices.com
DB files define the default RAM-based property database for the object store. The
syntax is a bit cryptic, but it is documented. For Platform Builder-generated systems,
it is rare to need to use the database at all, except to set up the automatic
connection for ActiveSync, as follows:
Code:
; This is the database initialization file.
; format is as follows -
; Database : db name : type in hex : num sort order : hex propid : hex flags ....
; CEDB_SORT_DESCENDING 0x00000001
; CEDB_SORT_CASEINSENSITIVE 0x00000002
; CEDB_SORT_UNKNOWNFIRST 0x00000004
; CEDB_SORT_GENERICORDER 0x00000008
; A database specifier can be followed by any number of record specifiers
; Record :
; A record specifier can be followed by any number of field specifiers
; Field : hex propid : value [ either string or hex dword ]
; End (ends a matching database or a record context)
Database: "DB_notify_events" : 0 : 1 : 0001001F : 0
; 0001001F - PROPIDR_NAME
; 0002001F - PROPIDR_CMDLINE
; 00030013 - PROPIDR_EVENT
Record :
Field : 0001001F : "repllog.exe"
Field : 0002001F : "AppRunAtRs232Detect"
Field : 00030013 : 9
End
End Database
This DB file will set up the notification database to run REPLLOG whenever an RS232
event is triggered. This will start the connection process on the default "hot plug"
port for ActiveSync.
Maybe you can map an 8-way d-pad with buttons to the keyboard with this method and speed up the response time without using C/C#/C++? I Dunno. I Never heard of
using a DB file as a driver until I read up on the REG files.
For those who don't know but are interested RS232 is Infrared. I'm sure the codes
above could be changed to a USB or even Bluetooth COM Port.
Somebody Push this thread to my favorite COOKS!

Mapping or Programing OnScreen Keyboard Buttons...

I posted this in the Rafael section as well, but am looking for a larger response pool.
Is there any way to program the on screen keyboard (on page 9/9) to program some of the blank available keys with ESC, END, CTRL and F1 - F12? They are currently not used and I can not find an application that will give me these key functions anywhere. I need them for a DOS program I am running via a gotomypc connection.