Can owners with the TyTN II ROM see band selection in the Phone Settings (to choose between Auto, 3G/WCDMA, GSM)? If so, could you post a screenshot or list out the values under the following in the registry:
HKLM/Software/OEM/PhoneSetting
Thanks for the help in advance.
auto = 10
GSM (900+1800) + UMTS2100)=50
GSM (1900+850) +UMTS(1900+850) = 58
UMTS (2100+800)=30
Hope that helps. But why you need the value? just select the band and done with it.
Just select Network = GSM or AUTO(3G) for battery convern.
GSM/UMTS = auto
Because there is no band setting in the phone settings. I'm trying to determine what is different here, and it seems like there is a difference in the registry. My registry settings for that page are COMPLETELY different.
gadgetluva said:
Because there is no band setting in the phone settings. I'm trying to determine what is different here, and it seems like there is a difference in the registry. My registry settings for that page are COMPLETELY different.
Click to expand...
Click to collapse
I have the band setting in the phone settings, looks nothing like what was posted though. I have three sub directories, "Band Type", "FDN", "NetworkType", each with several "ItemValue" Dwords, and "ItemName" string values.
In the root of Phone Settings:
(Default) (value not set) : string
ShowPIN2Page=1
ShowNITZPage=1
ONSDisplayRule=1
ShowUMTSBandPage=1
Enable3GLongNamePrefix=1
ShowALSPage=1
QOSTrafficClass=4
LongNamePrefix = "3G" (string value)
Attached is a Registry file for my entire "PhoneSetting" entry
Just load the HTC Rom on you Tilt. It works lot better than AT&T Rom. I also using TomTom 6. Works really well.
With HTC Rom, it links with my Mercedes Benz BlueTooth handfree, with AT&T it will not show all contacts and call history.
LOAD the HTC Rom, it work great!!! I have been using it for almost a month without freeze.
So been playing lots with registry editor. Found how to change my default home page in IE and while there...
If you go to:
HKLM\Software\Microsoft\Settings.
What is in there are all options available in settings tab of the phone.
With no surprise there is more entries there then what we can see. Some are empty some are half filled in.
For example
{90A593C1-F945-4bf7-AB56-A999E425F16F} - It's title Search
In side there is Location and we get
app://{5B04B775-356B-4AA0-AAF8-6491FFEA5664/SearchSettings
and
{A7DD1D7D-C7CA-4566-A5E7-015C7940276E] - Internet Explorer
In side there is Location and we get
app://{5B04B775-356B-4AA0-AAF8-6491FFEA5663/_default
Can any help and explain what is this location:
app://{5B04B775-356B-4AA0-AAF8-6491FFEA5663/_default
Bold part is the only part that differs from each setting but from name it seems like a coded path to where some setting files are located.
Is there a way of decoding where said app is and accessing it?
Any one that knows more then me could have a look in to if it is possible to enable some other settings?
Can u advise where u got the reg efitor from?
http://forum.touchxperience.com/viewtopic.php?f=20&t=593
Registry editor found here... Its in beta right now.. Just thought I would share...
Curious as I am, I found myself digging around in the *#*#4636#*#* settings. If you press Phone information and then press the hamburger menu, the first line of that would read "Select radio band".
I did press "USA Band", and nothing seems to have changed, but if I wanted to restore that setting to whatever it was before I pressed "USA Band", where exactly is that setting stored? In the modem partition?
Likely the hardware doesn't support the other options. Meaning this is more of a core setting to inform the device what it uses. Not to actually change capabilities. However if you find a way to change the capabilities, some international individuals would love you. As where its stored, no idea. What you could do is. Make a band backup. Then change it and make another nandbackup. Then compare the two backups via hex comparison.
Skwerl23 said:
Likely the hardware doesn't support the other options. Meaning this is more of a core setting to inform the device what it uses. Not to actually change capabilities. However if you find a way to change the capabilities, some international individuals would love you. As where its stored, no idea. What you could do is. Make a band backup. Then change it and make another nandbackup. Then compare the two backups via hex comparison.
Click to expand...
Click to collapse
I actually tried changing the preferred network type in the same "hidden" menu, and that setting didn't stick through a reboot, so I don't think that the radio band setting sticks either.
I will definitely try what you said though, as soon as official factory images are available.
I want to know the basic nv value of Max 2
I lost the default when unlocking the band.
I'm trying to use KT 3G and LG data, but I can not ...
Is there a way to initialize the nv value?
If not, I'd appreciate it if you could give us the default ... I think we should get it back to normal.
01877 :
00946 :
02954 :
00441 :
06828 :
rnrgy said:
I want to know the basic nv value of Max 2
I lost the default when unlocking the band.
I'm trying to use KT 3G and LG data, but I can not ...
Is there a way to initialize the nv value?
If not, I'd appreciate it if you could give us the default ... I think we should get it back to normal.
Click to expand...
Click to collapse
This is from a Mi Max 2, which I think is a China version running the English ROM.
For addresses with multiple items, settings I don't list below are 0.
01877 :
"rf_bc_config" is an unsigned 64-bit integer: 562950035735427
00946 :
"band_pref_16_31" is an unsigned 16-bit integer: 0x04E8
02954 :
"nv_band_pref_32_63_type.band" is an unsigned 32-bit integer: 131072
00441 :
"band" is a 16-bit unsigned enum: 0x380
06828 :
"nv_lte_bc_config_type.lte_bc_config" is an unsigned 64-bit integer: 2061584302293
What happened when you tried?
Did you try adjusting only one of them at a time?
I am trying to enable bands 2 and 4 right now. I would appreciate it if you could provide some information on what does not work.
I have enabled the "LTE Band pref" setting for bands 2 and 4 as well. The number matches my nv_lte_bc_config_type.lte_bc_config setting. We know that the pref is a requirement for the GSM bands, so it's no surprise that we need to set it here as well.
I am now getting 4G on the phone, but I still need to find some app to confirm that my setting is allowing it to work on B2 or B4. The other thing that could be happening is a change in cloud cover or radio noise is allowing a B5 signal to reach me.
If that is working for me, the next step is to try disabling bands that are near in frequency and not used in my country to see if signal strength can be improved.
Edit: It's setting 65633. Mine was 0x1E0000000D5, so to add B2 and B4 (Combined value 0xA), I changed it to 0x1E0000000DF
ZHNN said:
I have enabled the "LTE Band pref" setting for bands 2 and 4 as well. The number matches my nv_lte_bc_config_type.lte_bc_config setting. We know that the pref is a requirement for the GSM bands, so it's no surprise that we need to set it here as well.
I am now getting 4G on the phone, but I still need to find some app to confirm that my setting is allowing it to work on B2 or B4. The other thing that could be happening is a change in cloud cover or radio noise is allowing a B5 signal to reach me.
If that is working for me, the next step is to try disabling bands that are near in frequency and not used in my country to see if signal strength can be improved.
Edit: It's setting 65633. Mine was 0x1E0000000D5, so to add B2 and B4 (Combined value 0xA), I changed it to 0x1E0000000DF
Click to expand...
Click to collapse
btw, you can use "network signal guru" from the app store to check which LTE bands are enabled on your phone disabling bands is also possible with that app, so itll make ur life way easier by using it instead of manually disabling it via above method.
Android 10 they moved apn xml to /system/product/etc make copy of xml make the changes user_visible="true" and user_editable="true" and its fixed in Android 10 Android 9 first you make 2 copys of your apn in system etc one for you to edit, one for when you mess something up it happens. in the xml you find your carrier and the dun apn add the line user_visable="true" it works this way you need to be able to see apn but not be able to write to it be careful after you edit copy it to back to system/etc change permission 0644 and reboot. the xml is UPDATED for Android 10 place in /system/product/etc/apns-conf.xml I did in twrp i put Android 10 in mega so it could be downloaded NEWos 10.0.2 NEW product/ect download link
New https://mega.nz/#!ShFlTQwT!iNY2aIlcdr9wvQuHhmahH17dAprTZzoFtvmv9WZCKC0 for system/ect https://mega.nz/#!T8EHTYqY!TPNslQzQ-ZvZx5rqXIUXryHM89fwUCNjoF5c39AJmZM the ect controls mtu i have them matching for 310260
Won't this get you kicked off your carrier for excessive use?
never it just allows dun very easy I decompiled the framework.apk changed mtu dont prefer apn also but no they allow unlimited on TMobile but they only see it as data it unblocks apn after change you reboot and it's there just keep read only you only delete line user_visable"false" I used my manager to do so and changed permission to 0644 and root ownership and copied over in twrp I tested with file manager it just unlocks it if you change user_editable to true on main apn you can open speed
Tried to follow this, having a heck of a time.
I went into system etc apn xml, found my carrier apn named T-Mobile LTE
But it didn't match the apn in settings under access point names. Also you said to also find the dun, there was no dun for TMobile LTE any where. I seen dun entries for other TMobile apns, but not the one named TMobile LTE. There were manyother TMobile entries, like TMobile US 160, 260, 270 and a bunch of other numbers. Under my settings/access points, the apn selected is named TMobile LTE with no number after, so I figure that's what I need to look for in the xml, so I find it, but again, the info under it doesnt match the MCC and MCN numbers don't match and the Apn type doesn't either. For example , in my settings/access points, the last apn type is xcap, but in the xml xcap isnt there, there's just default, supl. Mentioned it because Im guessing they need to match? But they don't.
Also, when I do find the right one in the apn xml what exactly am I supposed to do?
Delete user_viable=false Ok I understand that, but where exactly is that supposed to be? Under my carrier? If so, I'm using solid file explorer, so I searched the words user_viable= false and thru out the entire XML file there are only 4 instances of user_viable= false and they are all under Verizon apns. So I'm not sure what's up with this, because it's definitely not under the TMobile apns.
And then you said NOT to delete read_only=true? Ok I understand that , but again, is that supposed to be under my carrier right?
So basically, when I find the correct apn in the xml, user_ viable = false should listed, and I'm supposed to delete that, then save and change permissions to 0644 and reboot? Then after reboot go into settings/access points and reset apn.
Is that right? If it is, good
Now I have to figure out how to find the right apn in the apnxml file.
Sorry for all this trouble.
kinda but make a copy of apn xml to internal or sd can't modify while system is using it use mt manager app I have English version if needed it lets you jump to line you need and backs it up but after you copied XML you can modify it I've put xml back in system with twrp fixed permission 0644 rebooted and fixed permission my file explorer check ownership make sure it's root you then can reset apn in settings and what you set works, on pcweb user_editable false I think works best (like mms you can see but not edit system will use if it's there) if you need my manager English I'll send if you tell me apn and oos version I'll make you one if you're having issue I always like to help when I can
that's how I moved and ownership with my manager and I use project fi apn because I decompiled my framework config_respects hold carrier config to false and config dont prefer son to true you can use gravity box to do that that's not needed I've changed a lot mtu 1500 I helped build a few ROMs so not a noob lol
I appreciate your time and you trying to help.
I'm still lost though. Sorry
I'm on the OnePlus 7 pro, On Tmoble
Ok I'll make a copy of the apn xml and place it on sd card, so then I'm able to edit it. But what exactly am I looking for?
I'm on TMobile, the name of my apn applied under Settings-WiFi & Internet-Mobile Data- Access Point Names is TMobile LTE, so when I open the xml find in a root explorer, am I looking for the entry named TMobile LTE, right? Once I find that, you said to delete the line user_viable=false, but there is no such line, and there also isn't a DUN entry.
Please try to direct me step by step if possible, considering my exact situation stated above.
Thank you very much ecompton
Here are screenshots of the xml entry that I think is the correct one, and the 2nd screenshots are of my apn in settings.
Do you see anything here that is correct or incorrect?
You see how there is no user_viable=false or no dun entry.
You see the apn entry in the xml file doesn't match the apn in settings? Should they match? Or no?
If you don't want to root, there's another way.
Go to your APN settings and set "MVNO type" to "GID" and "MVNO value" to "FF", save and go back, other operator specific APNs will be gone.
You won't be able to create (or add) DUN configurations but that would also cause the "default" APN to be used instead of your operator's DUN configuratoin.
Enjoy!
maddler said:
If you don't want to root, there's another way.
Go to your APN settings and set "MVNO type" to "GID" and "MVNO value" to "FF", save and go back, other operator specific APNs will be gone.
You won't be able to create (or add) DUN configurations but that would also cause the "default" APN to be used instead of your operator's DUN configuratoin.
Enjoy!
Click to expand...
Click to collapse
Thanks for the reply.
To Bo clear, I'm already rooted.
But I still tried what you said, after I hit save, and go back like you said, nothing changed, the same apn with all the same settings that was applied b4 is selected.
Is that is what's supposed to happen?
Thank you
ecompton59 said:
that's how I moved and ownership with my manager and I use project fi apn because I decompiled my framework config_respects hold carrier config to false and config dont prefer son to true you can use gravity box to do that that's not needed I've changed a lot mtu 1500 I helped build a few ROMs so not a noob lol
Click to expand...
Click to collapse
What theme u using?
if you add gid it wrong after you do turn on airplane mode that's wrong seen and talked to guy who made post check apn settings trust me I did this you can use other apps offline sim database app with airplane mode copy it with dun in place and it works because framework.res.apk has privileged on writing those to write it in but you have to make it system app. just add user_visible="true" to apn reboot then reset apn in apn setting I'll show you with your apn can't test because I'm 310260 (imsi 310260x97) those numbers need to match xml I'll put the tether one to add too I know this is way to make it work see my apn in pic I know this stuff other pics are your apn
here's line with your sim
<apn carrier="T-Mobile Tethering"
mcc="232"
mnc="03"
apn="pcweb.tmobile.com"
user=""
password=""
authtype="0"
server=""
proxy=""
port=""
mmsc=""
mmsproxy=""
mmsport=""
type="dun"
read_only="true"
roaming_protocol="IP"
protocol="IPV4V6"
/>
match it 2 spaces paste at start and after /> next apn on next line it will match
Sheetzie03 said:
Thanks for the reply.
To Bo clear, I'm already rooted.
But I still tried what you said, after I hit save, and go back like you said, nothing changed, the same apn with all the same settings that was applied b4 is selected.
Is that is what's supposed to happen?
Thank you
Click to expand...
Click to collapse
Yes, just some providers (i.e. Vodafone) would be having another APN, with type=dun, that would be used while tethering in order to apply a different billing.
After the change only the "main" APN would be kept (at least that's whayt I've seen).
The internet3 is VPN apn I'm just testing long as you have that backup you're good it's very easy I just make it hard lol I'm using Windstream ones too dsl stuff lol the *#*#4636#*#* lte td-scdma/umts makes network ca lte and 3g only then on apn change bearer in apn settings from unspecified (uncheck) and check all other ones is wrote in buildprop to speed net to
if you can't get fun just make a folder with the same name as apk I'm uploading apn sim database editor for you just have airplane mode on find you apn edit it to have done when you go to blank apn setting just click th plus sign top right and give it 30 sec reboot and you have it and here's my manager don't edit system edit your copy then copy it to system change permission to 0644 and ownership to root next post has both apps from mega
offline sim https://mega.nz/#!SAFVwIpD!ivTNKzQr0GiFbcC9pihQLQc4Q31TfWX2357UUVg97rY here's my manager so it's easy https://mega.nz/#!7VUlwSRb!gjzGslW63ql-heB1TSRJCDTC1Mln00jkV-mB6G0_opE
Thank you so much for trying to help me, appreciate it alot.
However, I'm having heck of a time following you, and I'm honestly pretty tech savvy.
I mean no disrespect at all. Please know that. It's just hard for me to understand you.
I did do your manager, thank you for that. Because with solid explorer, I wasn't able to edit the apn xml file, and with your manager, I was able to. So thank you.
Ok, let me ask you this. You mentioned you are 310 260, and you directed to 232 03 in the xml file. But I'm also 310 260. So shouldn't I be looking for the 310 260 in the xml file?
Edit: I think I follow with how to edit the xml, you want me to add the 'tmobile tethering' entry to xml, with the exact lines underneath shown in the pic, save then copy to system- etc and set the permissions. I did this ( I think I did it right) and nothing happened. Could it be because I'm 310 260 and not 232 03?
See ?
your post #8 that was mmc you had highlighted lol so I thought I'd help yes do your carrier mcc mnc I can just put mine on here you just copy it to /system/etc change permission 0644 and below the permission change owner it will be sd_card because that's where it came from I can just give you mine if your plmn is 310260 T-Mobile I'll have it in 10 min here