Hi,
Today I tried to flash my phone using odin, the flashing stopped in the middle and the phone won't come back, I restarted the phone then it showed a phone, exclamation mark and a computer on screen.
I know this is a half brick, I made myself a jig using 300k resisters, the phone starts but still the exclamation mark screen, same with vol down + power method.
Now I am stuck, does anyone who had this experience can tell me what to do? How do I get back to download mode?
Thanks all.
Alex
This actually happened to me yesterday (except I don't have a jig) when I was going from stock froyo to a gb ROM. I too had the phone exclamation computer screen. I ended up just starting up the Jf6 one click Odin and plugged in my phone. It recognized it and everything went fine after I hit start. It worked for me, but I would still be cautious since i'm pretty sure it still involves changing boot loaders.
Sent from my GT-I9000 using XDA App
CapnPez said:
This actually happened to me yesterday (except I don't have a jig) when I was going from stock froyo to a gb ROM. I too had the phone exclamation computer screen. I ended up just starting up the Jf6 one click Odin and plugged in my phone. It recognized it and everything went fine after I hit start. It worked for me, but I would still be cautious since i'm pretty sure it still involves changing boot loaders.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You mean even odin recognizes it even when it's not in download mode?
jaxitt said:
You mean even odin recognizes it even when it's not in download mode?
Click to expand...
Click to collapse
That's the way it worked for me yesterday. After failing to get download mode, I pulled the battery, put it back in, started Odin one click, plugged in the phone, and it recognized it in the com port if Odin.
Sent from my GT-I9000 using XDA App
jaxitt said:
You mean even odin recognizes it even when it's not in download mode?
Click to expand...
Click to collapse
I'd say at this point it's probably worth a shot unless someone tells you otherwise.
Sent from my GT-I9000 using XDA App
You should be ok, I had the same problem once and Odin recognized it for me too.
Sent from my smooth awesome MOSAIC powered Captivate on the XDA app.
If is the screen that also says something about hardware failure and recovery mode, yes you can also flash it there just like download mode.
Walk into at&t, say "my phone just stopped working" and raise hell?
If they ask about flashing or anything, just say "I don't know what that is. I was trying to log in to facebook."
If they don't hand you a brand new phone instantly for free, demand to speak to the manager.
jaxitt said:
Hi,
Today I tried to flash my phone using odin, the flashing stopped in the middle and the phone won't come back, I restarted the phone then it showed a phone, exclamation mark and a computer on screen.
I know this is a half brick, I made myself a jig using 300k resisters, the phone starts but still the exclamation mark screen, same with vol down + power method.
Now I am stuck, does anyone who had this experience can tell me what to do? How do I get back to download mode?
Thanks all.
Alex
Click to expand...
Click to collapse
If the jig just turns on the phone into kernel panic mode then you are still OK. It may be that your touching the wires themselfs when your holding the jig. Make sure to use gloves or be really careful how you hold it. I had this happen my first few times with a home made jig.
zelendel said:
If the jig just turns on the phone into kernel panic mode then you are still OK. It may be that your touching the wires themselfs when your holding the jig. Make sure to use gloves or be really careful how you hold it. I had this happen my first few times with a home made jig.
Click to expand...
Click to collapse
i wrapped it in plastic tape, so i thought it worked, but just won't boot into download mode.
could the jig trigger "kernel panic mode" (phone ! comp) if it weren't working?
thanks you.
BenKranged said:
Walk into at&t, say "my phone just stopped working" and raise hell?
If they ask about flashing or anything, just say "I don't know what that is. I was trying to log in to facebook."
If they don't hand you a brand new phone instantly for free, demand to speak to the manager.
Click to expand...
Click to collapse
I wish I could , I am from Hong Kong, there is no at&t here
CapnPez said:
I'd say at this point it's probably worth a shot unless someone tells you otherwise.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
tried this, open odin, plugin phone, put in battery
phone ! computer
one more thing, i was doing a one click odin flash, could this have damaged the bootloader?
when you get the phone on a black screen the phone is actually in download mode. That image basically means the phone cant boot up, but its forced itself into a download mode state so kie, odin or heimdall can recognize it to update the firmware etc
BenKranged said:
Walk into at&t, say "my phone just stopped working" and raise hell?
If they ask about flashing or anything, just say "I don't know what that is. I was trying to log in to facebook."
If they don't hand you a brand new phone instantly for free, demand to speak to the manager.
Click to expand...
Click to collapse
THAT's the reason the carriers want to lock down devices right there...
people taking their phones into their own hands doing something to it before they know what they are doing, ending up with a non working but completely recoverable phone but still trading it in cause they dont want to take the time to learn how to fix what they just F'ed up
OP that is the "incomplete flash screen" if your bootloaders were damaged then you get NOTHING out of the phone at all.
when you plugged in using the button combos with odin open and it went to that screen did odin see it?
If you have gingerbread bootloaders then the PC ! PHONE screen should act as download mode if you plug the phone in with odin open.
Sent from my SGH-I897 using XDA Premium App
erbsmokah said:
If you have gingerbread bootloaders then the PC ! PHONE screen should act as download mode if you plug the phone in with odin open.
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I just flashed stock rom jf6 yesterday, so I think it is not gingerbread anymore
studacris said:
THAT's the reason the carriers want to lock down devices right there...
people taking their phones into their own hands doing something to it before they know what they are doing, ending up with a non working but completely recoverable phone but still trading it in cause they dont want to take the time to learn how to fix what they just F'ed up
OP that is the "incomplete flash screen" if your bootloaders were damaged then you get NOTHING out of the phone at all.
when you plugged in using the button combos with odin open and it went to that screen did odin see it?
Click to expand...
Click to collapse
um, i tried probably all the combes i could find on the internet, tried jig, tried plugin usb with odin opening, they all lead to this phone ! computer screen, i flashed 2.1 jf6 stock rom yesterday, could this be the reason, that all the method does not work?
Thank you guys.
jaxitt said:
i wrapped it in plastic tape, so i thought it worked, but just won't boot into download mode.
could the jig trigger "kernel panic mode" (phone ! comp) if it weren't working?
thanks you.
Click to expand...
Click to collapse
Yes it will still trigger it to turn on if it is not done right aand if your at the PC! Screen then that is what will show up. The plastic tape may not be blocking The electric current from the human body. I would suggest using electric tape. Even with the tape make sure to hold it by the resistor and make sure your not touching any of the wires
You didn't answer my question.
Does Odin see it?
That is the incomplete flash screen, the image for download mode is just a .png if the flash you were attempting failed before that image was rewritten to the phone when download is initiated all you will get is that screen.
Homemade jigs can be a real pain to get right, might want to buy one...
make sure the USB is plugged into the back of your PC, right click Odin and run as admin. Use the jig, if you still get that screen plug it in anyway and see if you get communication with Odin, if you get a com port hit start and cross your fingers.
Related
need alt ways to get into recovery other than adb and holding down the volume keys.
i bricked my captivate using the odin one click recovery going from the i900 rom to stock. odin had froze and i restarted trying again only to see the phone and computer screen.
sorry a bit frustrated ....ask all the questions u need
Here's what got me out of a jam...
mattonline said:
1) Remove the battery
2) Remove the SIM
3) Reinsert the battery
4) Run ODIN (Note: I am using Windows 7 Professional x64 so I ran ODIN in Administrator mode by right-clicking on the file in Explorer and choosing the 'Run As Administrator' option. I would suggest doing this to make sure you have no permissions issues with the program.)
5) Depress both the up and down volume buttons on the phone at the same time
6) While you are depressing both the up and down volume buttons, plug in the USB cable.
No need to depress the power button or do anything else. The phone should go right into Download mode with the little yellow construction guy.
Then ODIN will see the COM port you are connecting with and you can just click Start.
Click to expand...
Click to collapse
i know....i posted right under u in that thread
maybe some commands i can do in ubuntu
the odin thead has all the info you need...
this phone is not brickable
http://forum.xda-developers.com/showthread.php?t=731989
I'm not so sure that it's not brickable, I'm pretty sure I bricked mine...
I was trying to load the international galaxy s 2.2 rom using odin 3 and for some reason I got stuck in recovery mode and could do nothing (this was after it finished loading the rom). I couldn't make it go to the download mode. Anything I did just took me right back to recovery.
I'd really love to know what you guys would have done, I'm new to android the captivate is my first.
Thanks in advance for your input.
By the way, I was talking it through with a buddy and we came up with a possible cause. I was rooted when I tried loading the 2.2 rom. Would that have bricked it?
Sent from my SAMSUNG-SGH-I897 using XDA App
MikeyMike01 said:
Here's what got me out of a jam...
Click to expand...
Click to collapse
You just saved me from literally tearing out the little hair I have.
Odin is one tricky SOB.
Why can't Vibrant users be this helpful?
t0406peru said:
I'm not so sure that it's not brickable, I'm pretty sure I bricked mine...
I was trying to load the international galaxy s 2.2 rom using odin 3 and for some reason I got stuck in recovery mode and could do nothing (this was after it finished loading the rom). I couldn't make it go to the download mode. Anything I did just took me right back to recovery.
I'd really love to know what you guys would have done, I'm new to android the captivate is my first.
Thanks in advance for your input.
By the way, I was talking it through with a buddy and we came up with a possible cause. I was rooted when I tried loading the 2.2 rom. Would that have bricked it?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Make sure you have the phone plugged kn to usb before trying the power into dowload procedure.
Sent from my GT-I9000 using XDA App
brick no more
designgears said:
the odin thead has all the info you need...
this phone is not brickable
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
tru dat!
can i tell you how good god is?
so over at androidforums by djgibbsjr
his words....
i did the same thing thing initially, no big deal, battery pull and while the phone is off hold volume key and power, ...
GUYS.......all i needed to do was hold down the volume key not both
Yes, the buttons are different if you attempted to flash a Galaxy S rom, the typical button hold will not work.
designgears said:
Hey guys, if you are stuck on that phone+!+computer screen, do this to get into download mode!!
1. Take out your sim card, sd card, battery and open Odin3(you must open odin3 before you start or it won't flash. Do NOT put your sim or sd card back in).
2. Put the battery in.
3. Plug in USB. (the phone will power on to that screen)
4. Hold down both Volume keys, and then push power. Hold it and dont let go.
5. Wait for it to go black and return to that horrible screen.
6. When it goes black the 2nd time release power and keep holding the voldown and volup.
note: THE STUPID SCREEN IS NOW FIXED!!
Click to expand...
Click to collapse
that is EXACTLY what got my phone out of the certain brick situation i thought i was in this morning. i had been trying for hours, every combination imagineable from the vibrant/galaxy s forums. odin3 had shut down on me twice mid process so everything was SEVERELY screwed. i did that combination and the very first time it caught and installed now my phone works perfect. ended up sending designgears a donation based on that post alone. thanks dude!
naplesbill said:
Make sure you have the phone plugged kn to usb before trying the power into dowload procedure.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I did have my phone plugged into power when I was trying the button push combos.
I didn't, however, try holding down just the volume button so I can't know for sure if that could have worked.
Since I was within the 30 day window I just took it back to at&t and they gave me a new one. I'm too chicken to try loading the 2.2 rom again. I really want to, but I can't afford a $500 brick...
Sent from my SAMSUNG-SGH-I897 using XDA App
t0406peru said:
Since I was within the 30 day window I just took it back to at&t and they gave me a new one.
Click to expand...
Click to collapse
AT&T replaced it without question? Interesting...
Edit: Well, now that I think about it, the guy that sold me mine was pretty clueless about it. I had to show him how to remove the battery cover, despite the printed "ILLUSTRATED" instructions stuck to the cover.
There's going to be a lot of refurbished captivates hitting the market soon.
t0406peru said:
I did have my phone plugged into power when I was trying the button push combos.
I didn't, however, try holding down just the volume button so I can't know for sure if that could have worked.
Since I was within the 30 day window I just took it back to at&t and they gave me a new one. I'm too chicken to try loading the 2.2 rom again. I really want to, but I can't afford a $500 brick...
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
So, I didn't brick it... I did the same thing with my replacement phone but this time I was patient enough to actually figure out how to fix it.
Sent from my GT-I9000 using XDA App
So I can't get any button combo to work, and all I get is White AT&T screen (if unplugged) and a frozen loading screen(if plugged into usb). Any ideas?
I think I have the same problem.
Used Odin one click to flash stock rom and then tried to flash JH7, but had some troubles with odin when trying flashing... tried to reboot the phone by pulling out the battery and now I can't turn it on, just have an image on the screen: Phone has troubles with connecting to PC and that's it...
oh yeah, that helped me:
1. Remove battery & usb
2. Open odin.
3. Plug in usb.
4. Hold vol down.
5. Put battery in.
devitalized said:
AT&T replaced it without question? Interesting...
Edit: Well, now that I think about it, the guy that sold me mine was pretty clueless about it. I had to show him how to remove the battery cover, despite the printed "ILLUSTRATED" instructions stuck to the cover.
Click to expand...
Click to collapse
Me 2 about the battery cover! Lol they let just anybody work at these stores. All they know about these phones is what's printed on that little card. Every now and again you'll find someone that cares about their job as is on top of their game. But that's few and far between...
Sent from my SAMSUNG-SGH-I897 using XDA App
Bricked captivate
ok so i was running a devil kernel on jellybean 4.2 and for some strange reason the rom started acting funny and gave me a message saying i had to type in a password ti decrpyt storage even though i have no passwords on my samsung I897. So i decided to flash back to stock and start all over again from scratch using odin one click but in the middle of downloading my phone was disconnected and it gave me the bricked screen shortly after. Now i am unable to do anything on this phone ive tried pushing the volume buttons and taking the battery and sim card out while running odin 3 again trying to force it back into download but so far no progress has been made. If any one can help me it is much apprecitated.
Okay long story short. I flashed to phoenix rom from cognition 2.2 rom with cwm. Now i can't even odin back to 2.1. Every time i insert the battery the phone turns on itself. Please help me I have tried to go to download mode , recovery mode. it just sits at the at&t screeen
anyone help please!!
Hi Matt. I'm pretty sure you're not bricked, but you are at a point that might give you a little difficulty getting into download mode. Try the following:
Download Mode
You don't need to be at a "phone> ! <computer" screen to do this either, though you might need to try it a few times.
If you have the Android SDK installed you can type:
adb reboot download
To have it switch to download mode. If you don't have the Android SDK installed you can search the forums for directions or I'll post back later with how to install it.
Another option, of course, would be to create a jig or buying one pre-made. I don't believe you're at this point yet.
If those methods don't work...
Pull your Sim Card, Battery, and any External SDCard
Turn on Odin
Plug your Phone back into the USB Cable (battery out still)
While holding down the Volume +/- Button - put your battery back in.
It should go into DOWNLOAD MODE.
If you get the Gray Battery Charge screen - it didnt work. Rinse and Repeat until it goes into the DOWNLOAD MODE. Might take a few tries.
avgjoegeek said:
If those methods don't work...
Pull your Sim Card, Battery, and any External SDCard
Turn on Odin
Plug your Phone back into the USB Cable (battery out still)
While holding down the Volume +/- Button - put your battery back in.
It should go into DOWNLOAD MODE.
If you get the Gray Battery Charge screen - it didnt work. Rinse and Repeat until it goes into the DOWNLOAD MODE. Might take a few tries.
Click to expand...
Click to collapse
I just tried this method and made a video of how i failed lol i'll post it here once it's uploaded
lol... I take it that it didn't work? It is a pita to get it to work .. but it should work.
avgjoegeek said:
lol... I take it that it didn't work? It is a pita to get it to work .. but it should work.
Click to expand...
Click to collapse
here is the link to my video. see if you can find out how to get to download mode.
http://www.youtube.com/watch?v=i09jBM7did8
Try leaving it alone for a couple of minutes. The try again. Other wise I suggest a jig
Sent from my SGH-I897 using XDA App
mcord11758 said:
Try leaving it alone for a couple of minutes. The try again. Other wise I suggest a jig
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I left the battery out before i went to sleep. that is about a good 6-7 hrs.. i made the video when i got up this morning. i put the battery in and it still turns on by itself
Maybe try this
http://m.youtube.com/#/watch?deskto...e.com/watch?v=D0aoabVtPJ8&v=D0aoabVtPJ8&gl=US
Sent from my SGH-I897 using XDA App
Try holding both volume buttons and put the battery in.
No USB or anything.
MikeyMike01 said:
Try holding both volume buttons and put the battery in.
No USB or anything.
Click to expand...
Click to collapse
no luck
matt0323 said:
no luck
Click to expand...
Click to collapse
Have you tried the jig
Sent from me
mcord11758 said:
Have you tried the jig
Sent from me
Click to expand...
Click to collapse
How would it help? My phone turns on itself once i put the battery in..
I watched your video - thanks for posting it
Ok - I have never seen that happen before. But... unfortunately I think your phone truly is bricked.
I mean it looks like it isn't getting past the "boot loader" (sorry not a dev so the technical term might be a little different.) to even allow you to get to a recovery mode.
So unless MikeyMike or some other dev has some way for you to re-write the sbl.bin file to allow your phone to boot - it's pooched
avgjoegeek said:
I watched your video - thanks for posting it
Ok - I have never seen that happen before. But... unfortunately I think your phone truly is bricked.
I mean it looks like it isn't getting past the "boot loader" (sorry not a dev so the technical term might be a little different.) to even allow you to get to a recovery mode.
So unless MikeyMike or some other dev has some way for you to re-write the sbl.bin file to allow your phone to boot - it's pooched
Click to expand...
Click to collapse
so not even a jig would fix this?!!
Doesn't appear so - It won't get past the AT&T screen... does your computer even recognize the phone when it's plugged in?
I don't think it is booting up enough for you to get to the recovery menus... so sounds like the sbl.bin is corrupted - which unfort is a true brick.
But you could try the Jig as it is pretty inexpensive. Post here to let us know if it worked or not.
avgjoegeek said:
Doesn't appear so - It won't get past the AT&T screen... does your computer even recognize the phone when it's plugged in?
I don't think it is booting up enough for you to get to the recovery menus... so sounds like the sbl.bin is corrupted - which unfort is a true brick.
But you could try the Jig as it is pretty inexpensive. Post here to let us know if it worked or not.
Click to expand...
Click to collapse
the usb doesn't read the phone when it is plugged in. It says unable to read, malfunction. but it does charge. weird thing is it still say its charging when i pull the usb out
lol thats just a residual electricity in the phone that is still being discharged after you unplug it... kinda like static electricity and a light bulb.
But.. I would still try the jig as a last ditch effort - it is possible that it would work...
This is why we flash to stock and THEN flash custom roms, kids
Sent from my SGH-I897 using XDA App
So my phone was acting very, very funny. Like going into random bootloops application force closing so I returned my phone to stock, then while trying to install a custom kernal, everything went fine, then the phone rebooted and now it's stuck on a bootloop. Once it gets past the "att world phone" screen a bunch of fuzzy colored bars go all over the screen then the phone restarts, I cannot get into download mode at all.
I've got good news and bad news.
The god news is you are not hard bricked.
Bad news is my wife just woke me up to make pancakes and I'm really tired.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Do you have a jig?
Try removing battery, plug in usb, hold both volume buttons then put battery back in.
You don't necessarily have to be In dl mode for it to work. Sometimes you can get it to work on the phone!pc screen too.
Flash to stock jf6 using the one click odin stock jf6. But be careful, it contains bootloaders and could hard brick phone if anything goes wrong
Good luck
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Keep trying, you'll get it
Sent from my SAMSUNG-SGH-I897 using Tapatalk
artvandalay22222 said:
Do you have a jig?
Try removing battery, plug in usb, hold both volume buttons then put battery back in.
You don't necessarily have to be In dl mode for it to work. Sometimes you can get it to work on the phone!pc screen too.
Flash to stock jf6 using the one click odin stock jf6.
Click to expand...
Click to collapse
Just as a reminder...have Odin running on your computer when you have the usb plugged in. Then while holding vol up/down plug the battery in. Sometimes this helps too if it doesn't right away go into DL mode
also, there are tons of threads about how to escort from a soft brick, just do some searching/reading.
Don't get to frustrated. You will get it.
Unless you brick during a boot loader flash, theres a 99% chance you can recover, and easily.
Many roms do contain boot loaders, including the one you were flashing, but if it bricked the boot loader portion, you most likely wouldn't be able to turn it on or you would just get a black screen.
Sounds to me like your trying to flash the wrong kernal or something. Ive gotten them funny colored screens when I flashed a kernal for the wrong version of android.
you may have also gotten a bad download. try redownloading the rom/kernal you are trying to flash, and make sure you have the right file.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
so apparently I tried to flash without the physical 3 button combos for download and recovery mode so I got into download mode with adb commands.
but now I'm stuck in the PHONE--!--PC part, and odin doesnt recognize my phone. I've read most of the threads out there but none of the methods work, is it possible to fix this? or my only option is to bring back to the store?
gahlaygai said:
so apparently I tried to flash without the physical 3 button combos for download and recovery mode so I got into download mode with adb commands.
but now I'm stuck in the PHONE--!--PC part, and odin doesnt recognize my phone. I've read most of the threads out there but none of the methods work, is it possible to fix this? or my only option is to bring back to the store?
Click to expand...
Click to collapse
Reinstall drivers then plug your phone back in that should do it.
Sent from my SGH-T959V using XDA Premium App
TJj33p3rz said:
Reinstall drivers then plug your phone back in that should do it.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
oh, I've done that dozen of times.. still the same
See the "Connection Issues" Sticky Thread link that is in my Sig links-link below.
Sent by XDA Premium App
I had that happen then i tried to me many times i also ran the hiemdall back to stock one click it will ask you to install them again i did that it worked,then i was back to stock then started over.Now i ran odin and now my captivate wont even power on its just dead.Keep at it something will end up working.Good luck.
I never had that screen but I ran into an issue before (using motherboard USB port, correct drivers, etc) where I was in download mode but my computer did no recognize my phone. I had a jig and ended up pulling the battery, reinserting battery, and putting back in download mode and that worked.
would you guys happen to know how to determine if its an driver issue or the phone's problem?
oh and I've tried the CONNECTION ISSUE post, none of them worked for me
and also does the jig definitely work?
gahlaygai said:
would you guys happen to know how to determine if its an driver issue or the phone's problem?
oh and I've tried the CONNECTION ISSUE post, none of them worked for me
and also does the jig definitely work?
Click to expand...
Click to collapse
You can eliminate drivers as an issue by trying a Linux machine. Wubi installer is the easiest way to try it.
I've been at that screen many times. I would bet drivers have nothing to do with it at this point. The phone---!---PC screen is what I've always called a soft brick, not download mode. If you didn't have 3 button recover/download mode working before you used Odin, then the only thing I can think of is to make yourself the 301kohm jig. That should kick it straight into download mode. There's many links for this in here.
From there, I'm pretty sure there's something you can flash to give yourself button recover/download again, but since I have a first rev phone I've never had to do this.
bobbylx said:
I've been at that screen many times. I would bet drivers have nothing to do with it at this point. The phone---!---PC screen is what I've always called a soft brick, not download mode. If you didn't have 3 button recover/download mode working before you used Odin, then the only thing I can think of is to make yourself the 301kohm jig. That should kick it straight into download mode. There's many links for this in here.
From there, I'm pretty sure there's something you can flash to give yourself button recover/download again, but since I have a first rev phone I've never had to do this.
Click to expand...
Click to collapse
oooo i see, thanks, will try asap!
gahlaygai said:
oooo i see, thanks, will try asap!
Click to expand...
Click to collapse
The phone----/!\----PC screen is DL mode dude...
^^^ This. You can usually flash right from that screen.
b-eock said:
The phone----/!\----PC screen is DL mode dude...
Click to expand...
Click to collapse
This is Download mode.
This is a soft brick. Now some phones may be able to be flashed while in this mode, but mine can't. Mine is a rev 1007, meaning 3 button always worked and is damn near unbrickable. I've been on that screen many times and never been able to make Odin connect. But, I have been able to pull the battery, plug in USB, hold both Vol, and put battery in and boom, back in DL mode.
bobbylx said:
This is a soft brick. Now some phones may be able to be flashed while in this mode, but mine can't. Mine is a rev 1007, meaning 3 button always worked and is damn near unbrickable. I've been on that screen many times and never been able to make Odin connect. But, I have been able to pull the battery, plug in USB, hold both Vol, and put battery in and boom, back in DL mode.
Click to expand...
Click to collapse
The phone-!-computer that can be used as dl mode is the one that says "Firmware Upgrade Failure". I've flashed from that screen before (new one, not old one). Unless you have the i897 gb bootloaders, you probably won't see the new panic screen. A jig will fix you up if have the old panic screen.
mrhaley30705 said:
The phone-!-computer that can be used as dl mode is the one that says "Firmware Upgrade Failure". I've flashed from that screen before (new one, not old one). Unless you have the i897 gb bootloaders, you probably won't see the new panic screen. A jig will fix you up if have the old panic screen.
Click to expand...
Click to collapse
That makes sense. I haven't seen that screen while using GB boot loaders, only the older version.
Sent from my I9000 using Tapatalk
Sorry
10 char
b-eock said:
bobbylx, I have had all types of bricks this phone can have. I have a build 1012 and still didn't have the button combo problem. I promise you I know more about any subject on this phone than you. The
Phone----/!\-----PC screen
Is the firmware putting you into DL mode because it isn't going to boot up.
The android man digging is a hardware combination into DL mode.
I have had all screens this phone can have, I also have the unbrickable mod, so while your phone is brickable, mine isn't.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Well, let me rephrase my statement for you since you were obviously upset by what I said.
I've had this phone since release week. In that time, I have seen the phone---!---PC screen many times while flashing. My phone will not flash while on the phone---!---PC screen. Odin does not see it, nothing works. Many other users experience this as well.
I happened to mention that I have never had a 3 button issue no matter what I flash. So when I have been at the phone---!---PC screen, I do the battery pull, usb thing, and kick it into normal "shovel man" download mode, ie, the only one I can flash my phone with.
Now, phone---!---PC may act and work like download mode for you but doesn't for me. So I offered advice based on my personal experience.
While you may know more about the phone than I do, making statements like that do nothing to help your popularity around here.
Also, pretty sure my phone is unbrickable without the mod, at least I haven't and won't brick it by doing whatever I do. If I was a Dev, may be a different story. I can tell you I have flashed almost every ROM in the last year and a half and never had a problem I couldn't resolve.
bobbylx said:
Well, let me rephrase my statement for you since you were obviously upset by what I said.
I've had this phone since release week. In that time, I have seen the phone---!---PC screen many times while flashing. My phone will not flash while on the phone---!---PC screen. Odin does not see it, nothing works. Many other users experience this as well.
I happened to mention that I have never had a 3 button issue no matter what I flash. So when I have been at the phone---!---PC screen, I do the battery pull, usb thing, and kick it into normal "shovel man" download mode, ie, the only one I can flash my phone with.
Now, phone---!---PC may act and work like download mode for you but doesn't for me. So I offered advice based on my personal experience.
While you may know more about the phone than I do, making statements like that do nothing to help your popularity around here.
Also, pretty sure my phone is unbrickable without the mod, at least I haven't and won't brick it by doing whatever I do. If I was a Dev, may be a different story. I can tell you I have flashed almost every ROM in the last year and a half and never had a problem I couldn't resolve.
Click to expand...
Click to collapse
Well let me say I am sorry for not reading it correctly! Sorry. Will edit my post!
b-eock said:
Well let me say I am sorry for not reading it correctly! Sorry. Will edit my post!
Click to expand...
Click to collapse
No worries. And again, I'm no Dev so anything I say is just from what I've experienced. I'm sure there's quite a lot I don't know.
Anyway, to the OP, keep this thread updated on your progress.
And to go back to what I was saying, if you can't flash while in phone--!--pc mode and you can't get into shovel download mode, do the 301kohm resistor jig trick.
Sent from my I9000 using Tapatalk
so a buddy of mine possibly hard bricked his captivate today. he tried to odin a stock rooted rom and it messed up completely, i was able to get it into download mode again and odined back to a normal stock non rooted rom but it was like the odin didnt stick and it started doing the same thing. essentially when the phone is off if you turn it on it stays on the att screen for roughly ten seconds and bootloops. if you plug it in it acts like it is charging for a second then freezes and loops through acting like its charging over and over. if you power it on and then plug it in it goes to the charging screen and then loops. any suggestions since i can no longer get into download mode? do i need to buy a jig?
Sounds like you need a jig. You can buy what you need at radio shack and make it yourself though
Sent from my HTC PH39100 using xda premium
It's not a hard brick unless nothing ever comes on screen
Sent from my CM9 ICS i897 Captivate
korockinout13 said:
It's not a hard brick unless nothing ever comes on screen
Sent from my CM9 ICS i897 Captivate
Click to expand...
Click to collapse
well its a heck of a lot more than a soft brick haha
fosdos4790 said:
well its a heck of a lot more than a soft brick haha
Click to expand...
Click to collapse
Use one of the heimdall one clicks, they repartition and flash twice with bootloaders.
fosdos4790 said:
well its a heck of a lot more than a soft brick haha
Click to expand...
Click to collapse
No it's not. Only 3 states of being (without hardware damage), working, soft bricked, and hard bricked.
Working doesn't need defined
Hard brick is missing or corrupted bootloaders, and you get absolutely no response from it whatsoever.
A soft brick is any state where the phone does something, but doesn't boot all the way into Android. So if it was "a heck of a lot more than a soft brick" it would be dead, and you would need to zombify it with unbrickable mod, which isn't the case here. A jig will force download mode in seconds.
studacris said:
No it's not. Only 3 states of being (without hardware damage), working, soft bricked, and hard bricked.
Working doesn't need defined
Hard brick is missing or corrupted bootloaders, and you get absolutely no response from it whatsoever.
A soft brick is any state where the phone does something, but doesn't boot all the way into Android. So if it was "a heck of a lot more than a soft brick" it would be dead, and you would need to zombify it with unbrickable mod, which isn't the case here. A jig will force download mode in seconds.
Click to expand...
Click to collapse
I was mostly kidding but here's an interesting tidbit for you since you are apparently well versed in this, the jig didn't work.
Sent from my Nexus S using XDA App
fosdos4790 said:
I was mostly kidding but here's an interesting tidbit for you since you are apparently well versed in this, the jig didn't work.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Did you buy one prebuilt, or rig one together from capacitors and such?
I just bricked my Captivate using Odin.
It only shows the "phone yellow triangle computer" symbol and isn't recognized by the computer...
I just ordered a jig, hopefully when it arrives in two weeks it will work...
Until then, any options on getting this recognized by my computer so I can try Odin again ?
Thanks.
gn2 said:
I just bricked my Captivate using Odin.
It only shows the "phone yellow triangle computer" symbol and isn't recognized by the computer...
I just ordered a jig, hopefully when it arrives in two weeks it will work...
Until then, any options on getting this recognized by my computer so I can try Odin again ?
Thanks.
Click to expand...
Click to collapse
Make sure the odin is ready, pull your battery, plug your usb into your phone, hold both volume up/down, and reinstall your battery.
Don't freak out, it's going to come back up as the same screen this time, this screen will keep showing until you have a succesful flash, but your device should now show up on Odin.
gn2 said:
I just bricked my Captivate using Odin.
It only shows the "phone yellow triangle computer" symbol and isn't recognized by the computer...
I just ordered a jig, hopefully when it arrives in two weeks it will work...
Until then, any options on getting this recognized by my computer so I can try Odin again ?
Thanks.
Click to expand...
Click to collapse
Open Odin as admin, hold the two volume buttons of your phone, plug in the microusb cable, press "start" on Odin. Most of the time, the phone pc screen can be treated as a download screen.
I had a similar problem once, and I could've stop panicing! Just calm down and try what I said. I don't think that a Jig is necessary in your case.
An update, nothing worked on my phone, no button combinations, nothing at all, it just never would show up in Odin for me to reflash...got my jig in the mail finally and it did the trick within seconds. The phone is totally recovered now. Thanks for all the suggestions.
Nvm 10char