Related
Droid 3 Flash Failure
I assume it is possible to fix this problem but I can not find a solution despite extensive research. I have a Droid 3, XT862 experiencing:
AP Fastboot Flash Mode (S)(Flash Failure)
Every time I start the phone I get this message. I can get around it by using Power+M, going into Boot Mode Selection Menu and using Normal Powerup. I have Safestrap v1.08 installed and am able to run 5.6.890 as my safe ROM and Hash’s Cyanogen ICS and both ROM’s work great.
Having to go through these procedures is a pain. I have tried to SBF. I have attempted to flash using RSD Lite. All attempts fail. I would appreciate any help or even an explanation of what the problem may be. Thanks.
Hello
dowlnoad moto-fastboot
download swu.zip file
( moto-fastboot file and downloaded swu.zip file must be extracted to that same folder )
turn on phone by using power + vol down
and in CMD use a command
moto-fastboot flash preinstall preinstall.img
( you know, how to use a CMD in windows right ? )
after that reboot your phone all should be ok
You Give Me Too Much Credit
Thank you so very much for your help. I have moto-fastboot but have no idea where to obtain the swu.zip file. Any help would be appreciated. CMD in windows, what? Sorry, I am 62 years old, have no experience with this stuff. I thought I was doing well by rooting, strapping, and loading two ROMs. So if you could give me just a little more help here, I will kiss your avatar on the screen (which actually looks pretty hot!). Thanks.
Weird! Could you detail at which step RSD Lite failed to flash the ROM onto your phone? Normally, RSD Lite is the first to call when it comes to flash or unbrick Motorola phones. It's never failed me once since using on my Milestone.
Anyway, I don't know if you've read this instruction. This is pretty much foolproof. The link for the file is dead, you could try this to obtain it.
Good luck!
1. Download full system files from that link
http://www.multiupload.nl/PLYL79UDCC or from link what you got from blackbuddha
1a. make directory on C: and name it 1
2. extract this file to folder c:/1/
3. download moto-fastboot files
http://forum.xda-developers.com/attachment.php?attachmentid=635568&d=1308927194
end extract to C:/1/ where you have system droid3 system files
you must have moto-fastboot file and preinstall.img file in that same folder
( so you must check and if this both file is in diffrent folders please copy all to c:/1/)
4. click on start and in type CMD (and push enter)
5. in this black window ( CMD ) input cd/ (and push enter)
6. now type cd 1 (and push enter) you will go to folder 1
7.and now type moto-fastboot flash preinstall preinstall.img (and hit enter)
*** update ***
You must turn on phone with hold POWER + VOL DOWN buttons i forgot
niko99 said:
1. Download full system files from that link
http://www.multiupload.nl/PLYL79UDCC or from link what you got from blackbuddha
1a. make directory on C: and name it 1
2. extract this file to folder c:/1/
3. download moto-fastboot files
http://forum.xda-developers.com/attachment.php?attachmentid=635568&d=1308927194
end extract to C:/1/ where you have system droid3 system files
you must have moto-fastboot file and preinstall.img file in that same folder
( so you must check and if this both file is in diffrent folders please copy all to c:/1/)
4. click on start and in type CMD (and push enter)
5. in this black window ( CMD ) input cd/ (and push enter)
6. now type cd 1 (and push enter) you will go to folder 1
7.and now type moto-fastboot flash preinstall preinstall.img (and hit enter)
*** update ***
You must turn on phone with hold POWER + VOL DOWN buttons i forgot
Click to expand...
Click to collapse
I tried this but nothing happens after, phone stays in AP Fastboot Flash mode(S)
cmd did sending preinstall and writing okay twice.
Is the phone supposed to restart itself?
What next?
so no problem flash all files
with using a CMD and FAST-BOOT
moto-fastboot flash recovery recovery.img
moto-fastboot flash boot boot.img
moto-fastboot flash devtree device_tree.bin
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash preinstall preinstall.img
moto-fastboot flash cdrom cdrom
moto-fastboot flash radio radio.img
moto-fastboot flash system system.img
and this should help for 100% to you
Still working on this
I, original poster, still working on this to solve problem. Have two Droid3s so I have time to work on it. Will try later today. Thanks.
Does Not work!! Lint in the blowhole?
OK, I have tried this cure multiple ways and it just does not work. I downloaded multiple copies of the files to be installed. I have used CMD as described above but it just does not "flash". When I add the command line in CMD my hard drive cranks and spins, loading the files to be flashed. Then I get <waiting for device>. I put the phone into AP Flashboot Phone battery is OK, and plug in the USB cable. I get Erasing "userdata"...OKAY [0.047s] and Erasing 'cache" ...OKAY [0.156s] CMD says Sending "recovery" <9216 KB>... and nothing. I have waited, and waited. There is just something that prevents the files from being flashed in. Any possible ideas? It is obviously connecting if it can erase, but it will not send.
When using RSD Lite, the phone is detected as Fastboot CDMA_Solana S. When I attempt to flash the SBF file it says: Failed flashing process. Unable to retrieve interface handle. [0x7027]; phone connected.
You also try to flash mbm.bin and mbmloader.bin finally or not ?
MBM.BIN
MBMLOADER.BIN
this two files must work
moto-fastboot flash mbm mbm.bin
moto-fastboot flash mbmloader mbmloader.bin
must work ! look if you have this both files in that same folder where is fast-boot.exe
if you dont have download from here
http://speedy.sh/gURdE/mbmloader.bin
http://speedy.sh/UHGVd/mbm.bin
Thanks again but no luck
Tried to flash just these two files and no luck. The same process as described above occurred, then it did not flash the files. I am about ready to give up and just put up with having to use two steps to start the phone.
Are you on one of the leaked OTA ROMs (.902, .905, or .906)?
I am on .905 and also have this same issue. Cannot flash anything with RSD Lite and I get the AP-FastBoot Flash Failed message everytime I reboot.
I think we need a new version of RSD Lite.
Sent from my DROID3 using xda premium
Maybe Tha's The Problem
Perhaps you have put your finger on the problem. I have .906 currently installed. I am using RSD Lite 5.6 which I assume, but do not know, is the latest version available. My only reservation in agreeing that this may be the problem is that I believe I had 5.6.890 installed when I bricked and tried to unbrick using Pete's unbricking script. Flash would not work. Later I recovered by installing .906 from recovery (I think) and then continued to be unable to flash. So it could be a .906 problem but maybe not.
Now that the bootloader is unlocked, everyone is asking "WTF do I do now?". Well, here's a bit of help to get you started. I'm assuming you already have adb and fastboot setup and working -- if not, quit reading and get that taken care of. Also, I only run Linux...so I'll try to be transparent and only list the fastboot commands.
I assume that you're not a complete moron and can Google what you don't understand.
Don't use the stock\SDK fastboot binary for flashing /system.
An updated fastboot binary for Lin\Win\Mac can be found here on the Batakang FTP from our local, neighborhood Mattlgroff.
Linux -- Rename the file to moto-fastboot and add it to a directory in your $PATH -- Ubuntu\Debian users can just add it to ~/bin (enabled by default)
Windows -- Rename the file to moto-fastboot and put it somewhere handy...that's on you to decide.
ROOT\ADMINISTRATOR INFO
On Linux, you might have to run as root in order to run some of the fastboot commands. If your system uses sudo for root commands, typing "sudo -i" will bring up an interactive sudo shell so you don't have to type sudo over and over again. If your system uses su for root, well, you already know the command.
On Windows, you have to enable Administrator Privileges to be able to run some of the fastboot commands.
Linux Terminal Hints
~/ means your home directory -- example -- "gedit ~/Documents/file.txt" would open file.txt in gedit easier than /home/yourusername/Documents/file.txt
You can add a * to file names and directories to not type as much -- example -- "gedit ~/Doc*/file.txt" is the same as the command above, only shortened. If two files have similar names, like Documents and Downloads, then you have to type the name up until the firs different character then add *.
Use the command "../" to go up\back one directory. The command is stackable so "../../" would go back 2 directories and so forth and so on.
Use "cd" to change directories. Is an example really needed for this...
Proper Apps to Use
For zip file editing, use 7-zip on Windows and Archive Manager (file-roller) on Linux
For editing text files on Windows use Notepad++ or any text editor that has unix line breaks -- do not use default Notepad or Wordpad -- you've been warned. Use what ever you prefer on Linux. I prefer Gedit myself.
Basic Fastboot Command Syntax
fastboot flash "partition" "image" -- flashes partition image where partition is where to write to and image is the path to the image being written.
example -- fastboot flash system /path/to/system.img
fastboot -w -- does a factory reset; to expedite things, "-w" can be added to "fastboot flash system system.img -w"
fastboot continue -- continue with the boot process
fastboot devices -- list devices fastboot recoginzes
fastboot -s "device model number" -- set the device fastboot will write commands to; use "fastboot devices" to find model number
fastboot reboot bootloader -- reboot phone into fastboot mode (or restart fastboot mode while in fastboot); same as "adb reboot bootloader"
fastboot help -- list all of this & more
Command Info
Not all the fastboot commands work for us. Specifically, the "erase" commands. If a wipe command doesn't work, skip it. I'll mark them with a ! at the end if it might fail.
Install CWM Recovery by Epinter
Read Epinter's RAZR HD CWM Thread
Download the recovery image
On stock rom, navigate to /system/etc and rename install-recovery.sh to install-recovery.sh.bak
Reboot into fastboot -- use "adb reboot bootloader" from Terminal\Command Prompt
Wipe the existing recovery -- "fastboot erase recovery" !
Flash the recovery with "fastboot flash recovery cwmrecovery6028-xt925_20130219-epinter.img"
That's it, CWM is installed.
Install Stock Fastboots JB
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img
fastboot -w
fastboot erase cache !
fastboot reboot
Install Stock Fastboots ICS
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img.ext4
fastboot erase cache !
fastboot -w
fastboot reboot
Install Alternate Radio
Reboot into fastboot
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
NON-HLOS.bin is found inside a fastboot zip.
Easy Kernel Install
Download kernel-flash.zip in the attachments[/URL]
Open the zip
Replace the zips current boot.img and device_tree.bin from the fastboot of your choice
Install the zip with CWM
By default, kernel-flash.zip comes with Mex Retail kernel and devtree
Easy CWM Install
Download recovery-flash.zip in the attachments[/URL]
Install the zip with CWM
Not sure if its SS compatible, but it is CWM compatible (for the lazy Photon Q users).
Obtain root after installing a Stock Firmware
There are two choices for obtaining root after a stock flash. the closed source SuperSu by Chainfire & and the open source Superuser by Koush.
Download SuperSu zip from Chainfire (Closed Source)
Download Superuser from Koush (Open Source)
Download the one of the root zips above.
Reboot into CWM/TWRP -- adb reboot recovery
Locate and flash the zip (see below for an alternative way)
Reboot, that's it. Nice not having to run exploits\hacks\Linux just for root
Install Rom/Zip file with ADB + CWM
CWM has the awesome ability to install zip files without having to manually copy them to the phone first. All's necessary is a PC with working adb.
Reboot into recovery
Select "install zip from sideload"
On PC, type "adb sideload /path/to/zip" and press enter
The zip will now be copied to the phone's cache & install
Once installed, do any requirements you'd normally do like wipe caches, etc
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
miketravis said:
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Unless you're not rooted with an unlocked BL, there's really no reason why it shouldn't work?
Sent from my N4'd Atrix HD
I was rooted before unlocking... shouldn't it still be rooted?
Sent from my MB886 using Tapatalk 2
miketravis said:
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Did you uninstall safestrap?
Yep. Should I reinstall it and try again?
Sent from my MB886 using Tapatalk 2
---------- Post added at 01:40 PM ---------- Previous post was at 01:30 PM ----------
reinstalled safestrap and tried again, success!!
Not sure why that made a difference but I got it so thank you very much.
miketravis said:
Yep. Should I reinstall it and try again?
Sent from my MB886 using Tapatalk 2
---------- Post added at 01:40 PM ---------- Previous post was at 01:30 PM ----------
reinstalled safestrap and tried again, success!!
Not sure why that made a difference but I got it so thank you very much.
Click to expand...
Click to collapse
Still did not work for me
Did you install recovery inside safestrap? Then fastboot cwm?
Sent from my MB886 using Tapatalk 2
miketravis said:
Did you install recovery inside safestrap? Then fastboot cwm?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I did. After fastboot, I followed the OP instructions to uninstalling the SS recovery and SS app. Boot into recovery and got the open android.
tvd0405 said:
Yes, I did. After fastboot, I followed the OP instructions to uninstalling the SS recovery and SS app. Boot into recovery and got the open android.
Click to expand...
Click to collapse
same here.
I have the same problem. I was able to flash cwm, uninstall the SS recovery, and uninstall the app. The first time I got the dead android symbol. I restored SS via Titanium Backup, reinstalled the SS recovery, and flashed cwm again. I tried rebooting into recovery and was able to get cwm working. As soon I uninstalled SS and rebooted, I got another dead android.
probably because were all on the XT926 if we were to revert back to XT925 then the recovery should work otherwise we will have to tweak the recovery to get it to work properly witht the XT926 software awesome thing is we can now free up the space that SS used for a rom slot however for noobs you might wana stick with SS once you hardbrick without anything to go back too it will be game over for your phone and then you have to con ATT for another
i got it.....
i was on ICS 404 bootloader unlcoked and rooted
how the hek you go on bootloader menu (power vol.down???????)
right now im accessing evything with boot widget from play market....
everything works i backed up my stock rom.....
can i try a jellybean rom????? and go back to ICS as many times i want???? from cwm recovery???
thanx
htchd2fix said:
i got it.....
i was on ICS 404 bootloader unlcoked and rooted
how the hek you go on bootloader menu (power vol.down???????)
right now im accessing evything with boot widget from play market....
everything works i backed up my stock rom.....
can i try a jellybean rom????? and go back to ICS as many times i want???? from cwm recovery???
thanx
Click to expand...
Click to collapse
From Phone Off, Hold Power and Both Volumes.
If the phone is on, do the above and when the screen goes black, press them all again...I've been doing that for an hour now
I installed MR via fastboot and just now got it booting. I made the mistake of using the SDK fastboot to flash /system.
skeevy420 said:
From Phone Off, Hold Power and Both Volumes.
If the phone is on, do the above and when the screen goes black, press them all again...I've been doing that for an hour now
I installed MR via fastboot and just now got it booting. I made the mistake of using the SDK fastboot to flash /system.
Click to expand...
Click to collapse
What's MR?
yes it works.....thanx
i was used to powr vol.down with atrix4g
ok..now can i install any rom and if dont like it go back to may backup????
still a little scared.....
i mean i wont loose root right?
Markyzz said:
What's MR?
Click to expand...
Click to collapse
Mexican Retail
Install instructions in OP
htchd2fix said:
yes it works.....thanx
i was used to powr vol.down with atrix4g
ok..now can i install any rom and if dont like it go back to may backup????
still a little scared.....
i mean i wont loose root right?
Click to expand...
Click to collapse
You won't lose root
And with an unlocked bootloader, all you gotta do is flash an updater zip with the su binary and app for Stock roms that don't have root
I'll link to a root zip in the op once I find one (or just make it; depends on how quick I find it in a search)
thanx again..
ahahahha...what a beautifullll day....
skeevy420 said:
Mexican Retail
Install instructions in OP
Click to expand...
Click to collapse
is there a point to flash a different firmware? is it required by any means?
I had SS and was backed up, I booted up the "stock ROM" and was successful in unlocking the BL and flashing CWM. I made a new backup of the stock ROM and restored it with success in CWM. In the video it show he has MR , but im confused as to why.
Also, I cant seem to get rid of safestrap....how in the hell do you uninstall it???
downloaded all the goodies, gapps, rom, everything, went into CWM recovery (photon Q) followed steps exactly as followed, idk what the hell happened. Everything is wiped, tried rsd lite 5.7 with batakang stock and i get XML error every time. Ive flashed many roms since atrix 4g came out and so on, Can anyone please oblige me on this issue, im not a complete noobie.
asser failed: getprop("ro.product.device") == "xt925"
blah blah blah
E: error in /sdcard/Downloads/pac-mb886v22.zip
(status 7)
Installation aborted.
Any Help
BFRAPV42 said:
downloaded all the goodies, gapps, rom, everything, went into CWM recovery (photon Q) followed steps exactly as followed, idk what the hell happened. Everything is wiped, tried rsd lite 5.7 with batakang stock and i get XML error every time. Ive flashed many roms since atrix 4g came out and so on, Can anyone please oblige me on this issue, im not a complete noobie.
asser failed: getprop("ro.product.device") == "xt925"
blah blah blah
E: error in /sdcard/Downloads/pac-mb886v22.zip
(status 7)
Installation aborted.
Any Help
Click to expand...
Click to collapse
You must either A: install cwm (razr hd); or B: extract the zip, then go to Meta-inf > Com > Google > Android > Updater-Script, change "updater-script" to "updater-script.txt" then delete all the assert lines at the top, then save as "updater-script.file" then rename it to "updater-script" with no file extension again, and put it back in the same directory as the previous updater-script was, then repack the zip and install it. (I'm talking to you in detail because you apear to be new with one post, no offense if you know how to script it with note pad++ without detailed instructions. )
flashing error
Codex01 said:
You must either A: install cwm (razr hd); or B: extract the zip, then go to Meta-inf > Com > Google > Android > Updater-Script, change "updater-script" to "updater-script.txt" then delete all the assert lines at the top, then save as "updater-script.file" then rename it to "updater-script" with no file extension again, and put it back in the same directory as the previous updater-script was, then repack the zip and install it. (I'm talking to you in detail because you apear to be new with one post, no offense if you know how to script it with note pad++ without detailed instructions. )
Click to expand...
Click to collapse
i was on here prior but its been a while i appreciate the help. my issue theres no system on my AHD so how to get pacman rom redownloaded to my pc and no im not super BA at scripting. ya i can delete a few getvar lines to flash back to stock jb and start over again but syste.img wont even flash there while in AP Fastboot.
Thanks man
Trying to go to stock jb now, i had root and have unlocked bootloader, when usign rsd lite v5.7 i flash the xml after editing it and taking the 2 getvar lines out and now system wont flash, it says phone "Fail flashing process" "system.img" phone returned fail. flashing everything fine till it gets to the system.img file.
(Originaly Posted By: SkeevyDude)
Instructions Install Stock Fastboots JB
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img
fastboot -w
fastboot erase cache !
fastboot reboot
Don't use RSD Lite, its too complicated.
Codex01 said:
(Originaly Posted By: SkeevyDude)
Instructions Install Stock Fastboots JB
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img
fastboot -w
fastboot erase cache !
fastboot reboot
Don't use RSD Lite, its too complicated.
Click to expand...
Click to collapse
And the erase commnds with ! don't work for us.
I installed CM10.1 by manually formatting /system and /data before flashing. Can't fail a build.prop check if there is no build.prop to check
stock jb
skeevydude said:
And the erase commnds with ! don't work for us.
I installed CM10.1 by manually formatting /system and /data before flashing. Can't fail a build.prop check if there is no build.prop to check
Click to expand...
Click to collapse
so i downloaded stock att jb rom from xda, went to the directory C:\user\costco\desktop and to the stock jb folder open command prompt and typed the code.(phone is in fast boot currently as well) Cmmnd prompt says is not recognized as an external or internal command,operable program or batch file. Maybe my head is just to busy to focus i must be messing up somewhere. You guys are so freaking awesome for being patient with me and helping me, ill buy the brews haha
Not an issue with bootloader already unlocked i assume cause once im back on stock im gonna be 1000 times more careful when rerooting again to get back where i was.
idk if its terminal for vista or if its the download i got, i got it from a link on here from, I leave the "getvar lines on the xml file when i do it through terminal right?
Check out my reply in this post. I had the same problem and got it figured out...
http://forum.xda-developers.com/showthread.php?t=2209660
Atrix HD - PACman ROM
RSD wouldn't flash system.img for some reason and wouldn't exit AP fastboot mode until I successfully flashed. So with the working fastboot files (check out skeevydudes posts, don't use the SDK fastboot) make a folder w fastboot.exe, fastboot api, the stock zip for rsd (remove the getvar and system.img lines of course), epinter's recovery (skeevydude made a recovery flash that contains this), and system.img (extracted from the stock RSD flash zip). Then open terminal or command prompt. cd to the folder you just made... fastboot flash system system.img then it will reboot when it flashes, reboot back to AP fastboot and then cd to fold again and then fastboot flash recovery recovery.img Then from epinter's CWM you can flash the ROM as instructed in the OP wo having to edit anything. Please excuse my mess doing all this from my phone
Droid4Drew said:
Check out my reply in this post. I had the same problem and got it figured out...
http://forum.xda-developers.com/showthread.php?t=2209660
Atrix HD - PACman ROM
RSD wouldn't flash system.img for some reason and wouldn't exit AP fastboot mode until I successfully flashed. So with the working fastboot files (check out skeevydudes posts, don't use the SDK fastboot) make a folder w fastboot.exe, fastboot api, the stock zip for rsd (remove the getvar and system.img lines of course), epinter's recovery (skeevydude made a recovery flash that contains this), and system.img (extracted from the stock RSD flash zip). Then open terminal or command prompt. cd to the folder you just made... fastboot flash system system.img then it will reboot when it flashes, reboot back to AP fastboot and then cd to fold again and then fastboot flash recovery recovery.img Then from epinter's CWM you can flash the ROM as instructed in the OP wo having to edit anything. Please excuse my mess doing all this from my phone
Click to expand...
Click to collapse
no man its all good i need all the tutorial help i can get, never have bricked a phone and worried i did so, i can make sense of most of it but my head is full of tht sdk stuff, trying to forget it and get this working, i feel like an idiot asking for step by step crap but how am i to get it quicker than asking for a little help. learning from this is major for me. Thanks man hopefully i get it ok.
still no bueno
BFRAPV42 said:
no man its all good i need all the tutorial help i can get, never have bricked a phone and worried i did so, i can make sense of most of it but my head is full of tht sdk stuff, trying to forget it and get this working, i feel like an idiot asking for step by step crap but how am i to get it quicker than asking for a little help. learning from this is major for me. Thanks man hopefully i get it ok.
Click to expand...
Click to collapse
still a no go, have the new folder with all 5 items needed, pulled up command prompt and its giving same issue. F WORDDDDDDDDDs
C:\Users\Costco>fastboot flash system system.img
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
same error.
You need these fastboot binaries in the folder also, sorry I couldn't think of the word binaries earlier when I was typing... This I what I ment by the exe and api, just put the two files from the windows folder of the zip into the folder you made and try again... http://www.batakang.com/ftp/devs/mattlgroff/snapdragon-fastboots.zip
Atrix HD - PACman ROM
Droid4Drew said:
You need these fastboot binaries in the folder also, sorry I couldn't think of the word binaries earlier when I was typing... This I what I ment by the exe and api, just put the two files from the windows folder of the zip into the folder you made and try again... http://www.batakang.com/ftp/devs/mattlgroff/snapdragon-fastboots.zip
Atrix HD - PACman ROM
Click to expand...
Click to collapse
i have the snapdragon fastboot .exe and .api in the folder already. along with the system.img , epinters recovery.img and MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA
i took a screen shot of the directions you gave with the command prompt open and the folder with the files in it but couldnt upload it unfortunately.
Make sure adb.exe and fast boot.exe are set to run as admin. Right click them and set them to be admin. Then try again.
Sent from my MB886 using xda app-developers app
TTLayland said:
Make sure adb.exe and fast boot.exe are set to run as admin. Right click them and set them to be admin. Then try again.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
fastboot.exe is admin api doesnt have an option in advanced for run as admin, i opened terminal and cd to where the file was on c: drive and typed [fastboot flash system system.img] hit entere and it worked but the phone never rebooted after it completed, when i typed [fastboot flash recovery recovery.img] with is epinters recovery it says ERROR cannot load recovery.img
Scratch that I'm actually replying to this from stock jb, thank all you guys for all the help.
Sent from my MB886 using xda app-developers app
So my advice worked?
Sent from my MB886 using xda app-developers app
Ya it work but It wouldn't with battery under 60% when I charged it up it flashed with ease. I'm on stock 4.1.1 gonna try epinters cwm to flash and then finally pacman
Sent from my MB886 using xda app-developers app
BFRAPV42 said:
Ya it work but It wouldn't with battery under 60% when I charged it up it flashed with ease. I'm on stock 4.1.1 gonna try epinters cwm to flash and then finally pacman
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I found that the advice I gave you was the only thing that was not in the instructions. Good stuff that you got it working though.
Sent from my MB886 using xda app-developers app
Got a ? about Atrix HD flashed with Pac Man v22
I flashed Pac Man and everything looks great, and works well tiny lag issues but I love it so thank you to all the devs involved.
But...I have seemed to lose root access. I have tried to reinstall the root access with one click and it stops at Daemon started successfully *
any ideas thanks in advance!
Install a superuser zip through cwm.
Sent from my PACMAN MATRIX HD MAXX
I have a vzw moto x and I'm looking to unroot. Unfortunately, I have a mac, so the RSDlite that works only with Windows will not install. I don't have access to any vmware or a windows disc, so my question is, is there any way to fully unroot using only mac software? Thanks!
You can use fastboot to flash the files instead of rsdlite.
Sent from my XT1058 using Tapatalk 4
jhnl33 said:
I have a vzw moto x and I'm looking to unroot. Unfortunately, I have a mac, so the RSDlite that works only with Windows will not install. I don't have access to any vmware or a windows disc, so my question is, is there any way to fully unroot using only mac software? Thanks!
Click to expand...
Click to collapse
I just tried that and could do everything except for `system.img`. Worked fine with the same files and everything using RSDLite. I am not sure why, but that was my experience.
jhnl33 said:
I have a vzw moto x and I'm looking to unroot. Unfortunately, I have a mac, so the RSDlite that works only with Windows will not install. I don't have access to any vmware or a windows disc, so my question is, is there any way to fully unroot using only mac software? Thanks!
Click to expand...
Click to collapse
Download the FXZ for whichever version you have (ATT, VZW, etc.) then just extract the recovery.img and system.img. fastboot flash the recovery.img and system.img. reboot and you should be able to then just do a standard factory reset and you'll be back to stock. worked for me at least. I did the factory reset for good measure but flashing the system may suffice.
SnowKing25 said:
Download the FXZ for whichever version you have (ATT, VZW, etc.) then just extract the recovery.img and system.img. fastboot flash the recovery.img and system.img. reboot and you should be able to then just do a standard factory reset and you'll be back to stock. worked for me at least. I did the factory reset for good measure but flashing the system may suffice.
Click to expand...
Click to collapse
I'm having trouble flashing system.img. Terminal tells me that "bootloader variable not supported", "invalid sparse file format at header magi" and then "bootloader prefllash validation failed" and then "FAILED (remote failure)."
What do I do? I don't want to risk getting stuck in boot loop so I just have it sitting in fastboot mode...
Well, I'm not terribly adept at this myself, but I would say make sure that you downloaded the proper version of the FXZ. Extract the files, and I would flash the boot.img first, then the system.img. Mine worked flawlessly. Make sure you have the most updated fastboot and and stuff?
Sent from my XT1058 using xda app-developers app
jhnl33 said:
I'm having trouble flashing system.img. Terminal tells me that "bootloader variable not supported", "invalid sparse file format at header magi" and then "bootloader prefllash validation failed" and then "FAILED (remote failure)."
What do I do? I don't want to risk getting stuck in boot loop so I just have it sitting in fastboot mode...
Click to expand...
Click to collapse
Sounds like you have the wrong FXZ or the files may be corrupt. Try downloading again.
Tried again, still get the same error. Have the latest fastboot and got the right vzw firmware...idk what's wrong
Sent from my XT1060 using Tapatalk
In the same boat as the OP.
jhnl33, did you get the FXZ from here: sbf.droid-developers(dot)org/ghost_rcica/list.php
A lot of people have suggested using mfastboot.exe instead of regular fastboot. The file is too big to flash the system.img. mfastboot breaks the file down for flashing. I'm on the phone otherwise I would add the link. This is what I used and it worked flawlessly.
Sent via my MOTO X Press
buyayo said:
In the same boat as the OP.
jhnl33, did you get the FXZ from here: sbf.droid-developers(dot)org/ghost_rcica/list.php
Click to expand...
Click to collapse
Yeah, that's were I got it. I'm fine now; I just borrowed a friends Windows computer and used RSDLite.
lilcdroid said:
A lot of people have suggested using mfastboot.exe instead of regular fastboot. The file is too big to flash the system.img. mfastboot breaks the file down for flashing. I'm on the phone otherwise I would add the link. This is what I used and it worked flawlessly.
Sent via my MOTO X Press
Click to expand...
Click to collapse
Yeah, unfortunately, mfastboot.exe is a windows only thing, as far as I know...
jhnl33 said:
Yeah, that's were I got it. I'm fine now; I just borrowed a friends Windows computer and used RSDLite.
Click to expand...
Click to collapse
Yeah, I've been in the same boat. Typically I wind up using my work computer which is running XP. Fortunately, I have install privileges and a good boss =)
FYI: I've used Linux scripts on my previous phone (Atrix 2) but I don't code much. So if you find, or someone develops, a Linux option it'll work on Mac.
Sent from my XT1058 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=33228220
I believe the third post is the one for Linux.
Sent via my MOTO X Press
lilcdroid said:
http://forum.xda-developers.com/showthread.php?p=33228220
I believe the third post is the one for Linux.
Sent via my MOTO X Press
Click to expand...
Click to collapse
I'm in the same boat here- I only have a mac at home AND at work... No access to a windows machine without bothering a friend. I found the motofastboot osx32 and 64bit files but am kind of stumped as to how to execute those mfastboot over the usual fastboot I've been using this whole time. I've been able to flash everything back to stock but system.img because the file is too large, so if anyone can somehow explain to me how I can execute motofastboot commands using these files I'd really appreciate it, as it's really my only option to have the .img broken up and successfully installed.
Thanks!!!
Any update on this?
Same boat as OP.
---------- Post added at 08:49 AM ---------- Previous post was at 08:41 AM ----------
I tried using BHUNDVEN's [TOO] found in OG Android Dev but keep getting
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$ moto-x-flash VZW_XT1060_4.2.2-13.9.0Q2.X-116-MX-17-53_CFC_1FF.xml
Traceback (most recent call last):
File "/usr/local/bin/moto-x-flash", line 24, in <module>
tree = ET.parse(firmware_xml)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 1182, in parse
tree.parse(source, parser)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 656, in parse
parser.feed(data)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 1642, in feed
self._raiseerror(v)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 1506, in _raiseerror
raise err
xml.etree.ElementTree.ParseError: not well-formed (invalid token): line 1, column 2
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$
Thanks for the help!
---------- Post added at 09:18 AM ---------- Previous post was at 08:49 AM ----------
Ok so I needed to rename the .xml file to a .zip file ... extract it. I put the contents into the "moto-x-tools" folder and then run the command and keep getting "command not found".
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$ moto-x-flash VZW_XT1060_4.2.2-13.9.0Q2.X-116-MX-17-53_CFC_1FF.xml
Running: fastboot oem fb_mode_set
/bin/sh: fastboot: command not found
Running: fastboot flash partition gpt.bin
/bin/sh: fastboot: command not found
Running: fastboot flash motoboot motoboot.img
/bin/sh: fastboot: command not found
Running: fastboot flash logo logo.bin
/bin/sh: fastboot: command not found
Running: fastboot flash boot boot.img
/bin/sh: fastboot: command not found
Running: fastboot flash recovery recovery.img
/bin/sh: fastboot: command not found
Running: fastboot flash system system.img
/bin/sh: fastboot: command not found
Running: fastboot flash modem NON-HLOS.bin
/bin/sh: fastboot: command not found
Running: fastboot erase modemst1
/bin/sh: fastboot: command not found
Running: fastboot erase modemst2
/bin/sh: fastboot: command not found
Running: fastboot flash fsg fsg.mbn
/bin/sh: fastboot: command not found
Running: fastboot erase cache
/bin/sh: fastboot: command not found
Running: fastboot erase userdata
/bin/sh: fastboot: command not found
Running: fastboot erase customize
/bin/sh: fastboot: command not found
Running: fastboot erase clogo
/bin/sh: fastboot: command not found
Running: fastboot oem config carrier vzw
/bin/sh: fastboot: command not found
Running: fastboot oem fb_mode_clear
/bin/sh: fastboot: command not found
Flashing was successful!
Running: fastboot reboot
/bin/sh: fastboot: command not found
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$
cscohammers7 said:
I'm in the same boat here- I only have a mac at home AND at work... No access to a windows machine without bothering a friend. I found the motofastboot osx32 and 64bit files but am kind of stumped as to how to execute those mfastboot over the usual fastboot I've been using this whole time. I've been able to flash everything back to stock but system.img because the file is too large, so if anyone can somehow explain to me how I can execute motofastboot commands using these files I'd really appreciate it, as it's really my only option to have the .img broken up and successfully installed.
Thanks!!!
Click to expand...
Click to collapse
I just got mine to flash system with the 64 bit on my MacBook Pro just renamed the moto-fastboot-osx64 to mfastboot and did the command: mfastboot flash system system.img and it worked like a charm! Unrooted and took the OTA no issues! Then I unlocked the bootloader since it no longer voids the warranty on the Dev Ed.
lilcdroid said:
http://forum.xda-developers.com/showthread.php?p=33228220
I believe the third post is the one for Linux.
Sent via my MOTO X Press
Click to expand...
Click to collapse
Tried to use the Linux one, but got an error, any help with how to get this to work?
Try snapdragon-fastboots
Try snapdragon-fastboots, from skeevydude post 21, but I was able to flash twrp-2.6.3.1-ghost-4.4.img in Linux Mint 13 on my Moto X dev using ... fastboot flash recovery twrp-2.6.3.1-ghost-4.4.img and it gave me the option to flash root. I saw for Mac/Darwin also.
For anybody still wondering, here is a link to download the mfastboot files for mac 32 and 64bit
https://gist.github.com/crazed/7670423
Hey guys I'm mostly a lurker not too much of a poster I would respond to "BHUNDVEN"'s thread ([TOOL] Moto X FXZ Flashing Script (100% back to stock) [10/03/2013]) over on the OG Android development sections but alas my "Post count" is too low.
I keep getting this when trying to run the final command "moto-x-flash [insert .xml file]"
Any help? Thanks!
Last login: Thu Nov 7 00:31:17 on ttys001
jeffreys-mbp:~ jeffreymarshall$ cd desktop/moto-x-tools-0.2.0
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$ sudo python setup.py install
running install
running build
running build_py
running build_scripts
running install_lib
running install_scripts
changing mode of /usr/local/bin/moto-x-flash to 755
running install_egg_info
Removing /Library/Python/2.7/site-packages/moto_x_tools-0.2.0-py2.7.egg-info
Writing /Library/Python/2.7/site-packages/moto_x_tools-0.2.0-py2.7.egg-info
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$ moto-x-flash VZW_XT1060_4.2.2-13.9.0Q2.X-116-MX-17-53_CFC_1FF.xml
Traceback (most recent call last):
File "/usr/local/bin/moto-x-flash", line 24, in <module>
tree = ET.parse(firmware_xml)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 1182, in parse
tree.parse(source, parser)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 656, in parse
parser.feed(data)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 1642, in feed
self._raiseerror(v)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/xml/etree/ElementTree.py", line 1506, in _raiseerror
raise err
xml.etree.ElementTree.ParseError: not well-formed (invalid token): line 1, column 2
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$
I'm not to sure I have the python pkg installed correctly. Had to use the "sudo" command to get it to take.
AceBoonKoon said:
I'm not to sure I have the python pkg installed correctly. Had to use the "sudo" command to get it to take.
Click to expand...
Click to collapse
i cant help you with that toolkit as i don't use it. But if you are merely trying to flash your phone to stock then find the rsd back to 100% stock thread and do that. Just as simple as any other tool you can find.
But honestly, if you spent say 4 hours reading and installing things for adb/fastboot stuff, you won't ever need one of those tools and you won't ever again spend countless hours trying to figure out how to get some tool someone created to work correctly for your phone. The simple sometimes becomes the most time consuming.
Once you figure out a few commands and realize whats going on, you will understand how simple all of that stuff is, and then will be confused as to why anyone ever created a tool for that simple task. Not bashing on the people that created the toolkit, that helps hundreds of people out I'm sure that dont feel like reading a little bit.
memapp can
I would but this [TOOL] is for mac.
No windows machine ala no rsdlite. I did however see that I needed to rename the .xml file to a .zip file ... Then extract the contents and move them over to the moto-x-tools folder and tried flashing it that way but got a "Command not found" error.
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$ moto-x-flash VZW_XT1060_4.2.2-13.9.0Q2.X-116-MX-17-53_CFC_1FF.xml
Running: fastboot oem fb_mode_set
/bin/sh: fastboot: command not found
Running: fastboot flash partition gpt.bin
/bin/sh: fastboot: command not found
Running: fastboot flash motoboot motoboot.img
/bin/sh: fastboot: command not found
Running: fastboot flash logo logo.bin
/bin/sh: fastboot: command not found
Running: fastboot flash boot boot.img
/bin/sh: fastboot: command not found
Running: fastboot flash recovery recovery.img
/bin/sh: fastboot: command not found
Running: fastboot flash system system.img
/bin/sh: fastboot: command not found
Running: fastboot flash modem NON-HLOS.bin
/bin/sh: fastboot: command not found
Running: fastboot erase modemst1
/bin/sh: fastboot: command not found
Running: fastboot erase modemst2
/bin/sh: fastboot: command not found
Running: fastboot flash fsg fsg.mbn
/bin/sh: fastboot: command not found
Running: fastboot erase cache
/bin/sh: fastboot: command not found
Running: fastboot erase userdata
/bin/sh: fastboot: command not found
Running: fastboot erase customize
/bin/sh: fastboot: command not found
Running: fastboot erase clogo
/bin/sh: fastboot: command not found
Running: fastboot oem config carrier vzw
/bin/sh: fastboot: command not found
Running: fastboot oem fb_mode_clear
/bin/sh: fastboot: command not found
Flashing was successful!
Running: fastboot reboot
/bin/sh: fastboot: command not found
jeffreys-mbp:moto-x-tools-0.2.0 jeffreymarshall$
jayboyyyy said:
i cant help you with that toolkit as i don't use it. But if you are merely trying to flash your phone to stock then find the rsd back to 100% stock thread and do that. Just as simple as any other tool you can find.
But honestly, if you spent say 4 hours reading and installing things for adb/fastboot stuff, you won't ever need one of those tools and you won't ever again spend countless hours trying to figure out how to get some tool someone created to work correctly for your phone. The simple sometimes becomes the most time consuming.
Once you figure out a few commands and realize whats going on, you will understand how simple all of that stuff is, and then will be confused as to why anyone ever created a tool for that simple task. Not bashing on the people that created the toolkit, that helps hundreds of people out I'm sure that dont feel like reading a little bit.
Click to expand...
Click to collapse
In response to the fastboot commands suggestion - I have already tried using the adb/fastboot methods didn't work. Did a search for people with similar issues and found that it has something about it being on a mac or some other nonsense. That's the reason for the [TOOL] I think. It's a workaround.
AceBoonKoon said:
In response to the fastboot commands suggestion - I have already tried using the adb/fastboot methods didn't work. Did a search for people with similar issues and found that it has something about it being on a mac or some other nonsense. That's the reason for the [TOOL] I think. It's a workaround.
Click to expand...
Click to collapse
don't know where you fastboot is but i believe its trying to call it and its not in the directory that the cmd is pointed to.
Ok I've went down the list and manually flashed each command.
When I get to ./fastboot flash system system.img
I keep getting this error
"Mismatched PIV partition name for system
Invalid PIV image: system"
I can successfully flash all other commands except this one. I went into the .xml file and deleted the "getvar" portion already. Any help?
AceBoonKoon said:
Ok I've went down the list and manually flashed each command.
When I get to ./fastboot flash system system.img
I keep getting this error
"Mismatched PIV partition name for system
Invalid PIV image: system"
I can successfully flash all other commands except this one. I went into the .xml file and deleted the "getvar" portion already. Any help?
Click to expand...
Click to collapse
not sure about the error sorry. also you might want to click on the reply button so it appears as a notification for me or i might not ever look at the thread again if i forget, jsut fyi.
are you sure you are using the right fxz for your phone? also when you run manual commands in fastboot, the xml file doesn't matter. that file is just there for rsd and other programs to use (it is basically just a script of commands that gets called on by programs to run). i don't know if you are typing "./fastboot" instead of just "fastboot" in cmd prompt but you only need to type "fastboot flash system system.img"
jayboyyyy said:
not sure about the error sorry. also you might want to click on the reply button so it appears as a notification for me or i might not ever look at the thread again if i forget, jsut fyi.
are you sure you are using the right fxz for your phone? also when you run manual commands in fastboot, the xml file doesn't matter. that file is just there for rsd and other programs to use (it is basically just a script of commands that gets called on by programs to run). i don't know if you are typing "./fastboot" instead of just "fastboot" in cmd prompt but you only need to type "fastboot flash system system.img"
Click to expand...
Click to collapse
Thanks for the fyi didn't know. I've tried flashing both fxz's for my phone and nothing both keep saying the same error Mismatched PIV. Thanks for the schooling on the xml file didn't know that. Going to keep searching.
AceBoonKoon said:
Thanks for the fyi didn't know. I've tried flashing both fxz's for my phone and nothing both keep saying the same error Mismatched PIV. Thanks for the schooling on the xml file didn't know that. Going to keep searching.
Click to expand...
Click to collapse
both? you can't just flash both like that. are you sure you are doing all of this right? one for your phone is a different FW version than the other one. This could be why you are getting this mismatch. Also, you would need to unzip and move all of the files to the directory that your fastboot is in. Then if you were trying to flash a different fxz, you would need to remove the old files from that directory and replace them with the new fxz files.
Finally, the commands to run manually will be found at this link. http://forum.xda-developers.com/showthread.php?p=46712761&highlight=flash+stock#post46712761
jayboyyyy said:
both? you can't just flash both like that. are you sure you are doing all of this right? one for your phone is a different FW version than the other one. This could be why you are getting this mismatch. Also, you would need to unzip and move all of the files to the directory that your fastboot is in. Then if you were trying to flash a different fxz, you would need to remove the old files from that directory and replace them with the new fxz files.
Finally, the commands to run manually will be found at this link. http://forum.xda-developers.com/showthread.php?p=46712761&highlight=flash+stock#post46712761
Click to expand...
Click to collapse
Now it's saying that can't downgrade when trying to flash the bootloader and it still won't flash the system.img same error.
I think I messed up when I tried to flash the "newer" FXZ. To see if I could get it to go through.
AceBoonKoon said:
I think I messed up when I tried to flash the "newer" FXZ. To see if I could get it to go through.
Click to expand...
Click to collapse
ya you can't flash the old one anymore. it will fail. you should be able to flash the new system img though. just make sure you are using the right one for your device. couldn't find anything on the internet for that particular error. So not many people run into it. It has to be something you are doing. try redownloading the fxz (the correct new fxz for your phone) and then start over from the beginning of the code and flash all the new stuff.
jayboyyyy said:
ya you can't flash the old one anymore. it will fail. you should be able to flash the new system img though. just make sure you are using the right one for your device. couldn't find anything on the internet for that particular error. So not many people run into it. It has to be something you are doing. try redownloading the fxz (the correct new fxz for your phone) and then start over from the beginning of the code and flash all the new stuff.
Click to expand...
Click to collapse
The fastboot flashes through every command flawlessly all EXCEPT the system.img. Keeps saying the bootloader preauthorization failed. I've flashed it every which way, straight through, at random, only the recovery, bootloader, and system.img. Can't get it to play nice.
I did read somewhere that mac fastboot had an issue with how large the system file was for VZW's moto x and couldn't flash it. Someone said that rsd lite breaks it up into smaller pieces in order to get it to flash. I wonder if there is a manual way to do this?
AceBoonKoon said:
The fastboot flashes through every command flawlessly all EXCEPT the system.img. Keeps saying the bootloader preauthorization failed. I've flashed it every which way, straight through, at random, only the recovery, bootloader, and system.img. Can't get it to play nice.
I did read somewhere that mac fastboot had an issue with how large the system file was for VZW's moto x and couldn't flash it. Someone said that rsd lite breaks it up into smaller pieces in order to get it to flash. I wonder if there is a manual way to do this?
Click to expand...
Click to collapse
forgot you were using a mac. just throw that thing away and get a big boy computer. lol. jk. don't need to start hearing a bunch of people chime in but here is a link to a fastboot file that splits it up for you. don't know if it will help or not.
http://forum.xda-developers.com/showthread.php?t=2489249
jayboyyyy said:
forgot you were using a mac. just throw that thing away and get a big boy computer. lol. jk. don't need to start hearing a bunch of people chime in but here is a link to a fastboot file that splits it up for you. don't know if it will help or not.
http://forum.xda-developers.com/showthread.php?t=2489249
Click to expand...
Click to collapse
I went and downloaded the "motofastboot-olympus" file and extracted the Linux fastboot file and placed in my folder replacing the current fastboot and now when I try to run a fastboot command I get "./fastboot: cannot execute binary file" I've tried the "Darwin" fastboot as well same thing.
AceBoonKoon said:
I went and downloaded the "motofastboot-olympus" file and extracted the Linux fastboot file and placed in my folder replacing the current fastboot and now when I try to run a fastboot command I get "./fastboot: cannot execute binary file" I've tried the "Darwin" fastboot as well same thing.
Click to expand...
Click to collapse
i see that you actually searched for this answer because i went to that mac thread i remembered seeing to see if there was a solution there. so you can just factory reset the device right? you don't need the system.img there to factory reset i don't think. just try a factory reset.
just found this. try downloading the nexus for stuff. pull the fastboot-mac file or whatever it is out of it. run all your commands with the "./fastboot-mac" and see if it works now.
jayboyyyy said:
i see that you actually searched for this answer because i went to that mac thread i remembered seeing to see if there was a solution there. so you can just factory reset the device right? you don't need the system.img there to factory reset i don't think. just try a factory reset.
Click to expand...
Click to collapse
I've been searching all day for all of these answers. Just thought it would help to ask as well.
I found the solution to my problem. For any of those who are having trouble flashing back to stock ON A MAC It will not flash because the system.img file is TOO BIG you need the CORRECT version of Moto-Fastboot. Here's the link that you can download and place it in your "Fastboot" folder. http://forum.xda-developers.com/showthread.php?t=1138092
I suggest you hold on to that fastboot for future flashes/return to stock. Thank you for your help jayboyyyy!
AceBoonKoon said:
I've been searching all day for all of these answers. Just thought it would help to ask as well.
I found the solution to my problem. For any of those who are having trouble flashing back to stock ON A MAC It will not flash because the system.img file is TOO BIG you need the CORRECT version of Moto-Fastboot. Here's the link that you can download and place it in your "Fastboot" folder. http://forum.xda-developers.com/showthread.php?t=1138092
I suggest you hold on to that fastboot for future flashes/return to stock. Thank you for your help jayboyyyy!
Click to expand...
Click to collapse
nice find. im going to update that thread i made with this link instead of the link i had because it seems to have fastboot for everyone.