Odin / Flash Questions? - Captivate Q&A, Help & Troubleshooting

Problem: Attemping to flash to eclair(stock) using Odin version/s 1.81-1.82. Have not had any luck. The phone is rooted. But running bone stock os/rom. I suspect while using an app to kill the boot/shutdown sounds may have some how corrupted this cappy enough to block it from flashing back to stock.
Question: Are there any specific sites or suggestions that would walk me through ways to flash my Captivate back to Eclair?
Thanks in advance for any and all suggestions!
Sent from my Samsung Captivate using XDA App

Are you connecting the phone to a usb hob thats on the Mother board(rear one if on desktop), running ODIN as adming (if on vista or 7). You putting your phone in download mode and connecting after odin is open? Lastly you have drivers for your phone?
Edit: Mobiletechvideos usually has very good video guides.

U need to right click the Odin and run as administrator 1st, then connect ur phone in download mode to the computer. Be sure to connect the usb end of the cable to a usb port in the back of the computer or first port on laptop. Be sure that before u begin you have the correct drivers installed and then you may want to reboot your computer... then begin the Odining process.
Hope that helps.
edit: prbassplayer, I guess great minds do think alike... But you type faster.

Tried for awhile that night without success. The next morning after restarting my windows xp system it worked. All required software was installed. The pc had been restarted numerous times? Greatful for the suggestions. Still confused as to what the issue was however. Very perplexing indeed.
Sent from my SAMSUNG Captivate using XDA

Related

greek rom?

Is there any greek(greek translated) rom for i897 captivate? My device is semi bricked. What should i do? It is in download mode and I try to reflash its stock rom (i897ucjf6) but when i hit start or master clear in odin it does not responding, it stucks on file analysis. I have no phone for a few days now. Please help.
First off, Wrong section. Second. i dont know what a greek rom is. Third. what windows are you using?
Any Windows xp,vista, 7: try a different usb port
vista or 7: run odin as admin. if nothing happens again, use a different usb port.
if all else fail, you can try a different computer. but im not sure if that will help.
also, if you have tried all the usb ports on your computer. try restarting the comp and see if it works then.
hope this helps
illeont said:
Is there any greek rom for i897 captivate? My device is semi bricked. What should i do? It is in download mode and I try to reflash its stock rom (i897ucjf6) but when i hit start or master clear in odin it does not responding. I have no phone for a few days now. Please help.
Click to expand...
Click to collapse
There are no Greek Tom's for the captivate. Most are set To WWE. As for your issues please answer the above questions. I will move this once i get to a PC.
Make sure things things are done.
1. Drivers installed
2.Phone was put into DL mode by Odin
3.Drivers installed (Yes It is that big Of an issue)
Sent from my SGH-I897 using XDA Premium App
I'm running win xp and i 've tried all usb ports i have. It always stucks on file analysis. Thanks for helping.
ah ok, Well i had this issue in the past. and what help me was using a different computer. but at that time i had an windows 7 comp, so i used my sisters xp comp it worked right away. so at this point, i would iether try restarting your comp. or using another comp...
i have an idea but im not sure if its posible. there is another oden somewhere on here i believe its I897UCJI6 one click. i believe at the time it was the unofficial 2.2 release by designgears. try running that, and if it works, try using the I897UCJF6 to go back to bone stock...
Are you opening odin b4 connecting the device to the comp. make sure oden is open, and that the phone is in dl mode. then connect the device to the comp.
and like zelendel said, are the drivers installed?
kaoticvisual said:
ah ok, Well i had this issue in the past. and what help me was using a different computer. but at that time i had an windows 7 comp, so i used my sisters xp comp it worked right away. so at this point, i would iether try restarting your comp. or using another comp...
i have an idea but im not sure if its posible. there is another oden somewhere on here i believe its I897UCJI6 one click. i believe at the time it was the unofficial 2.2 release by designgears. try running that, and if it works, try using the I897UCJF6 to go back to bone stock...
Are you opening odin b4 connecting the device to the comp. make sure oden is open, and that the phone is in dl mode. then connect the device to the comp.
and like zelendel said, are the drivers installed?
Click to expand...
Click to collapse
I open odin, then connect the device and hit start. The device is already in download mode and all drivers are installed. It still stucks on file analysis. Only one time passed it but stuck again on set pit file. I'll try another computer and let you know.

Phone not recognized by ODIN

I am sorry to jump in but I am currently running the latest nightly and Ineed to flash bootloaders and start with Froyo again. But my computer is not detecting my phone. I have installed the Android SDK and installed the drivers for Nexus S but of no avail. i am stuck and would appreciate your help.
The funny thing is that I can use the phone as USB device but freaking ODIN is not detecting it. My windows does not has any unrecognised device. I have installed the Nexus S drivers as well. Is it a problem with ODIN or my phone or windows itself? I am running Windows 7 Enterprise 64 Bit edition.
I have tried;
Uninstalled Samsung Drivers / Restarted / Reinstalled
Swapped 2 different cords
Tried every available port on my PC
Restarted, pulled PC power cable, let it rest for a few seconds and plugged it back in
Uninstalled every USB Root Hub device and restarted so Windows could reinstall all of it
Tried Heimdall as well
I need my ODIN flashing back
Thanks in advance!
Look that Kies isnĀ“t running in the Background.
It is not - I can confirm.
Sent from my GT-I9000 using XDA Premium App
check with usb debugging activation on your phone!
Checked that too
Loosing hope on this -Am I going to be stuck with corrupt bootloaders and other issues?
Someone ... anyone?
Sent from my GT-I9000 using XDA Premium App
Have you tried using a different computer?
Yes sir. Tried on 2 different machines, 32bit and 64bit Windows 7.
Starting to get worried!
Sent from my GT-I9000 using XDA Premium App
Bump!
Sent from my GT-I9000 using XDA Premium App
Kies has an option to install the driver again check under tools then install driver maybe that will help
neoian1277 said:
Kies has an option to install the driver again check under tools then install driver maybe that will help
Click to expand...
Click to collapse
But Kies does not recognize the phone So it does not even try to install the drivers.
I am stuck. Without ODIN recognizing my phone, i can not flash anything on it or revert to stock. Would be great to know if there is anything I can do from Recovery Mode. The phone goes to Download mode as well but what's the use.
well this is a long shot but you could try and manually install it by going into where you installed kies in my case its C:\Program Files\Samsung\USB Drivers\24_flashusbdriver choose the X64 folder seeing as you are on a 64bit system and right click FlashUSB_x64.inf and install
neoian1277 said:
well this is a long shot but you could try and manually install it by going into where you installed kies in my case its C:\Program Files\Samsung\USB Drivers\24_flashusbdriver choose the X64 folder seeing as you are on a 64bit system and right click FlashUSB_x64.inf and install
Click to expand...
Click to collapse
Nope. It didnt help either.
F***! This is frustrating.
well you could always try it on a windows xp machine maybe try another usb cable you never know
i was having this problem too till i sent it back to samsung service centre where they changed the whole board.
my computer totally couldn't recognize my sms on either odin or usb. it won't restart when not connected to charging/power.
i've got a warranty claim and now it back and rooted with gingerbread 2.3.3 jvb install.
samsung service centre is the best. with service like that i'll stay with samsung all the way.
hope my experience help.
regards,
andrew sim from kuching, sarawak,
malaysia
Sent from my GT-I9000 using XDA Premium App
an obvious question, but since no one has asked it yet, are you in the download mode ? You have to be in download mode for Odin to detect.
PhoenixFx said:
an obvious question, but since no one has asked it yet, are you in the download mode ? You have to be in download mode for Odin to detect.
Click to expand...
Click to collapse
That is not true. My Samsung Galaxy S is recognised by Odin even when on in normal mode.
andshm said:
i was having this problem too till i sent it back to samsung service centre where they changed the whole board.
Click to expand...
Click to collapse
Yeah, I ended up doing the exact same thing. Something must have gone weird, because the phone would still charge, but wouldn't be recognized by anything.
It may well be damage to usb on phone, remove the inner cover check for cracks in soldering, and check pounds aren't out of shape
If they are gently straighten with pin
Sent from my GT-I9000 using XDA Premium App
Prakash
Just Remove the battery and wait for 10 seconds......
insert battery and start in download mode...
tadaaaa.....it's done....
Did you install the drivers for Hemidall? After I did this my phone was not recognize by Odin... but I'm guessing If I roll back or update the drivers some how in Device Manager then Odin would be happy again.

Phone Stucked At "At&t World Phone Screen"

I have Cognition V4.5.3
Im A Noob At This... Tried Ti Flash A Kernel With [APP] SGS Kernel FLasher
When I Rebooted My Phone Its Just Stuck At The Boot Screen...
Does Not Want To Go In Recovery Mode... Just Download Mode....
But Heimdall Does Not Recognize My Device...
What Can I Do? I Need To Get My Phone Back, Since Its A Gift
Thanks...
and i only have a mac... =/
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Try Odin 1 Click. You'll find it on here somewhere. It wil take you back to stock 2.1 Eclair. Then you can READ ABOUT flashing other ROMs and proceed from there.
bertito2580 said:
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Click to expand...
Click to collapse
im sorry but most of us can't even help you IF we want to The users of windows based PC's are greater in this forums compared to Macs. if there is drivers for mac, are they installed?
Since you only have a Mac, I would suggest installing Windows through Boot-Camp (included in Mac OSX) on a different partition. I read Galaxy S doesn't have drivers support for Mac OSX Leopart or later, not entirely sure if its true though, but I do have a MacBook Pro and had no success in finding a way to connect my phone to it by USB... Good thing I had a regular old Windows PC Desktop.
Then as Jack Man said, use Odin 1-Click found here
http://forum.xda-developers.com/showthread.php?t=731989
to reset your phone completely to factory settings, relatively simple to do as long as you read the instructions on that post. =)
Well since you only have a Mac and hiemidal is not see your phone i think your only option is to find a friend with a PC and give the Odin 1 click a try.
i ask my aunt for her pc,
Windows Vista 32-Bit
Downloaded And Installed The Drivers
Using Odin3 One-Click
I Put My Phone On Download Mode With The 3keyCombo
And The PC Says"USB Device Not Recognized"
Im Just Gettind Pissed And Stressed
It's My Only Phone.
What Can I Do To Fix This?
Also Tried Running Odin As Administrator... And NOthing...
bertito2580 said:
Also Tried Running Odin As Administrator... And NOthing...
Click to expand...
Click to collapse
Sir, just in case, did you reboot after installing drivers and BEFORE you tried connecting the device? Also, did you check if Odin detected your device when its connected in Download mode?
yes, and thats what in trying to do, to get odin to detect my phone in download mode...
Ok, is your phone detected by the operating system? If it does, then try using this other Odin thread instead, this one however will restore it to Stock Samsung Galaxy with 2.3 Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1127249
Don't have to follow the rest of the instructions to root it just in case, but see if that version of Odin detects your phone.
actually thats the problem... windows vista doesnt recognize my device, either my mac... is there a solution to my phone or not? please help
OMG please help ((
I've Installed Captivate Drivers
Also
Galaxy S General Drivers
But When I Put My Captivate On Download MOde It Just Says
"USB Device Not Recognized"
One of the devices attached to this computer has malfunctioned and
Windows does not recognize it.
Are you sure it goes in to Download Mode (little android with a shovel)? Also have u tried different usb ports?
Like the above said, are you sure you are in download mode?
What USB port are you using if ots a desktop computer. There are known issues using front usb, plug into the usb on the back of the tower.
Also, are you sure odin doesnt see it? I know windows doesnt like it, but start odin, put phone in download mode, connect to pc. What does odin show? Any connected devices?
Sent from my GT-I9000 using XDA App
yes, im sure its on download mode and tried all the ports...
Im gonna try on another pc
to see if its the pc

[Q] Not recognized in Download Mode

Had I not been dumb ol' Curious George and flashed the wrong backup kernel with SGS Kernel Flasher, I would not be in this mess. The phone is stuck on a loop at the AT&T logo. I can't get into recovery, but I can get into Download mode just fine using power+volume down. I have searched the forums, and tried everything suggested and everything I can think of, and my last resort was to start a new thread. I've tried on four different computers, a Vista, an XP, and two Windows 7 machines, all USB ports, none of which have worked. I have uninstalled and reinstalled drivers. I've gotten it to where it will recognize as mass storage if I plug it in while it is looping. It even installs all Samsung/Android USB drivers. But I can't access the mass storage, it just tells me to insert a disk into drive X. And once I boot into Download mode, it's an Unknown device. And since Windows will not recognize it, Odin can't see it. So my poor Captivate's been collecting dust for at least a week now while I've been using my old phone. At this point I'm pretty desperate and any help would be appreciated.
I'll ask the dumb question: have you tried heimdall? If not, gone it a try.
You may also want to try heimdall from a Linux live usb environment.
Had the same issues with my phone. Turned out to be a bad cable got a new one and it worked first try
Sent from my SAMSUNG-SGH-I897 using xda premium
igedBE seems
Sorry, forgot to mention that the cable is not the problem as I have tried a different cable with the same results. And also used my cable with a different phone and that worked perfectly.
As for Heimdall, I'll download and try it as soon as I can, but since the computer itself can't recognize the phone, won't Heimdall not be able to pick it up either?
Last resort, Think about applying the unbrickable mod or have Mobile Tech Videos JTAG it. The unbrickable mod is very cheap, and relativly easy if you have knowledge of soldering. JTAG from Mobile Tech Videos is 40$ USD, but they can get your phone back to you in as little as 5 days from the day you sent your phone out. both are good options, if you are unable to get download mode working.
Also try this if you have any luck. http://forum.xda-developers.com/showthread.php?t=1257434 (Just side load ubuntu on your windows / mac if needed)
If someone could help me as well. I have tried everything. Odin will not recognize my phone. Heimdall does work!!! I can flash anything with Heimdall. But I need Odin for the ROM I want.
http://forum.xda-developers.com/showthread.php?t=1486344
I have tried everything including a "commercial" jig to boot to download mode. Still no go!!!
Ummm Why do you need Odin instead of heimdall?
Alright well I downloaded Heimdall but I can't install the drivers because the phone shows up as an Unknown Device in Zadig.
This is list that Zadig found:
Unknown Device
USB Composite Device (Composite Parent)
USB Human Interface Device (Interface 0)
USB Human Interface Device (Interface 1)
Pretty sure its usb composite device
It's the Unknown Device. And the USB Composite Parent shows up even when the phone's not connected.
Anymore suggestions? Or if I can't, anyone I can send it to?
Did you find a solution?
I've got the same problem...did you find a solution?
^
See the "Captivate Connection Issues..." Stickied Thread in the General Forum.
Sent from my SAMSUNG-SGH-I897 using xda premium
Checked without success
Thanks 4-2ndtwin , but I followed all of the guidance contained in that thread, nothing has worked.
Same problem, Any luck with this yet?

Bricked even with download mode ?

Hi All,
here is the story, I was on MilkyS GB rom, made a ndriod backup, then flashed dark knight 2.1 then wiped , flashed DK3 w/ Semaphone. Today, I was going to flash stock JVU via Odin but while I was charging up the phone I already noticed Windows was showing error saying something like ' USB device is malfunction cannot install' , so I thought that must be a DK3 bug for not able to access to the SD card, so I did not care.
Went ahead and tried to flash Odin, sure enough Odin did not detect my phone, so did Google and found 'Gnex USB drivers' which by the way took forever to install, while waiting , I thought I might as well just go back to MilkyS GB by using the backup I have done before, so I went in recovery tried to restore, but not successful, so I went ahead and choose reboot....now I am stuck at the boot screen, pull battery, I can go into download mode , however, Odin cannot detect the phone so I still can NOT flash anything.... (just now tried all kinds of drivers I can find, CM7 USB driver, Google usb_driver_r04-windows, even installed the drivers within Andriod SDK, still can't detect the phone..)
Any suggestions ? am I out of luck ? by the way, tried installing drivers in 3 x different laptops and with different USB port on them...
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
scubadude said:
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
Click to expand...
Click to collapse
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
I guess you have tried going back in recovery mode using the 3-button combo but that is also not working?
Odin isn't recognizing your phone but does windows recognize it? If you uninstall all samsung drivers and then try to connect your phone to PC does it ask for installation of drivers? .. if it doesn't that means your phone's usb could have become faulty.. (just speculating)
Or you can try to use Heimdall instead of Odin.. maybe that'll work for you..
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
sorenba said:
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
Click to expand...
Click to collapse
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
btw , I have also already use Android SDK to install the Google USB driver....see attached.
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
asaf-g said:
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
Click to expand...
Click to collapse
thanks just tried the drivers from EZbases Odin, still did not work.
btw, tried brushing the connector on the phone in case of dust etc , still no go.
anyone else has any idea?..so sad right now ...
Sent from my Dell Streak using XDA
Same happened with all my laptops featuring a intel chipset. My desktop with nVidia chipset is the only one that detected it.
bestjsg said:
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
Click to expand...
Click to collapse
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
sorenba said:
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
Click to expand...
Click to collapse
thanks tried created a ubuntu live booted usb drive , installed heimdall , same thing can't detect the phone and then tried SDB in command prompt but gave error : device not found....
Sent from my Dell Streak using XDA
tried windows sdb , will try booting into ubuntu tonight and use sdb ..if that exist...
Sent from my Dell Streak using XDA
tried sdb via linux also , and got error device not found... anyone any idea ?
Sent from my Dell Streak using XDA
have read more threads haven't found a solution yet...
Sent from my Dell Streak using XDA
Same predicament
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
eurorv said:
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
Click to expand...
Click to collapse
thanks for sharing ..just weird that no drivers for ics rom works and I was always told that as long as you can get to download mode the phone is not truely bricked...but guess that saying must be changed now....i
will virgin fix it for you ? will they charge you ?
Sent from my Dell Streak using XDA
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
eurorv said:
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
Click to expand...
Click to collapse
that is great news....do you know if they will have to open up the phone and flash the hardware?
Sent from my GT-P7510 using XDA

Categories

Resources