[Q] Hard brick or fixable..? Help. - Captivate Q&A, Help & Troubleshooting

Okay, I was running Darky ROM 10.2, and wanted to update it to 10.3. My CWM didn't work, or the file was bad, but when i flashed and rebooted, the phone screen turned black. I'm I am right, a hard brick is when your phone will have no response at all, correct? When I turn my phone on, the ATT screenn lights up, but then the screen turns black. My soft touch buttons will light up but nothing else. The phone also won't show a screen for download mode to run ODIN. Is this a fixable situation, or should i go shopping for a new phone? Please help, it will be greatly appreciated.

Not hard bricked.
If the phone shows ANY SIGNS OF LIFE THEN ITS NOT HARD BRICKED.
So you do have I897 BL's since AT&T's screen comes up.
How are you trying to get into DL mode?

have u tried button combo to go to download mode? or by pressing the volume buttom and inserting the usb cable already plugged in?

Check my sig, there's a link to an app that will tell you if your bricked.

I've tried to get into Download mode from th button combos and then inserting the USB cable. The ATT lights up like normal, but then it turns dark. I tried running Odin, but no luck.

jaguars34 said:
I've tried to get into Download mode from th button combos and then inserting the USB cable. The ATT lights up like normal, but then it turns dark. I tried running Odin, but no luck.
Click to expand...
Click to collapse
Unplug phone, take battery out and wait one minute. Then start Odin on your computer and make sure your usb cable is pluged into usb slot directly connected to your mother board. Then put your battery back into your phone and and while holding both volume up and down buttons plug your usb cable in. That should quickly put you into download mode with at&t bootloaders.
If that didn't work try just holding the up volume key and plugging in the usb cable. If all that fails after a few tries then you will need a jig. A jig should work as you have successfully loaded the bootloaders if you see the at&t splash screen or buttons lit up. Just something messed up after the bootloaders load.
Sent from my SGH-I896 running MIUI.

Related

Phone-PC brick with no working 3 button - options?

Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
same here. no button combo method that previous worked is working now. :/
OP, did you see this thread: http://forum.xda-developers.com/showthread.php?t=775911
not working for me, but maybe it'll help you ... ?
Tremere said:
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
Click to expand...
Click to collapse
You may also want to try removing and then reinstalling the Samsung USB drivers on your PC.
I've verified there is simply no USB device being registered no matter what OS, the phone is just sucking power.
@The_Bishop: Did see that, exactly the same as yours, plug usb in, get that screen
Anyone want to be awesome and send my Capppy back to Samsung on my behalf?
best method that never dies when i was in your situation......
unplug usb, turn phone off, then put battery in, turn odin on, now hold volume buttons ONLY then insert usb in phone, you will see download mode with odin identifying the port;
hope it worked ?!?!?!?
Believe me I have tried everything. There is simply was and still is no way to enter recovery or download mode on this phone. Its hardware locked!
a little off topic, but how do i find my phones "bat build date" ?
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
YoungGun821 said:
a little off topic, but how do i find my phones "bat build date" ?
Click to expand...
Click to collapse
Is on the underside of the battery, one facing into the slot.
i.e 2010.08.13
terrigan said:
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
Click to expand...
Click to collapse
Done that. Exactly what happens in video. Both volume buttons down, plug in usb.. no response, just brick screen.
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
terrigan said:
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
Click to expand...
Click to collapse
I did try once or twice. From another thread it was also said to disable driver verification on windows startup for x64 machines. which I also did.
Basically I want to hear from someone who:
a) has a captivate that could never enter dl/rescue via buttons, only adb
b) captivate didn't trigger a plug in 'ping' from Windows until they ??
FYI this is a Macbook Pro, and I booted into Win7 x64 Pro for flashing.
Hi I have the same problem..
What I did was this rooted with one click.. loaded Cognition 2.1.6 all was good..I saw the froyo so I thought lets try it. so opened up ODIN put it in recovery mode. with ADB could never get it in the button way.. it started to load and it froze. I didn't disable voodoo and IS THAT WHY I AM STUCK? I have tried every combo changed drivers computer will not see the phone.. is it a AT&T Phone
IS there anyway to fix it?? or can someone make a program to fix this? I would make a big donation if they did!!!
Thanks Forum!!
Yeah I had it in adb mode to enter download mode, maybe that is why it won't start back up.
I've now given the phone to a local mobile repair business, if riffbox or someone comes out with a Captivate rescue soon its probably as a end result of me
I sent mine back to Samsung as well. BTW, I have a battery from 2010.08.12 so I might be in the same boat. Wish I'd have used one of my OEMs to see if that made any difference, but I did not. :/
I have the same issue.
Rooted my phone through adb, which was fine. Couldn't get into recovery/download modes with hardware before then.
Now my phone is bricked, and not detected or even charging via USB.
wtf
If the repair shop cant fix it try this:
1.) Remove Battery, SIM Card and External SD
OR
2.) Press and HOLD VOL UP AND DOWN with USB inserted and THEN slap in the battery.
This worked for me, for some reason inserting the battery last did the trick.
Let me know if anyone finds a solution to this I have tried it all and my computer will not detect my phone. Has Samsung blocked this in there firmware?
Did you try what I posted above?
yep nothing if I could get it to detect in command prompt I could force it but it won't... the button thing didn't even work when the phone worked!
So ....

[Q] Phone Bricked?

Ok, so I had my Captivate flashed back to stock and had it rooted. I decided to update from JF6 to JH7 through Kies Mini. After it finished updating, my phone was stuck at the Samsung Galaxy S screen and then it turned black, but the buttons still light up.
I already tried doing the 3 button recovery/download mode in every way possible, but my phone won't seem to go into recovery mode or download mode no matter what I do.
When I leave the usb cable plugged into the phone as I turn it on, my computer plays the notification sound where a device has been connected, but still black screen on the phone. Happens when the AT&T screen loads, wonder if that would help somehow
Please help!
Raeon said:
When I leave the usb cable plugged into the phone as I turn it on, my computer plays the notification sound where a device has been connected
Click to expand...
Click to collapse
If you had usb debugging enabled you can send a "adb reboot download" or "adb reboot recovery" command to reboot the phone. If not then you probably have to make one of those usb jig's with the 301k resistor.
But you should still be able to enter download mode if you pull the battery, press the vol up/down and put the battery back. My stock phone couldn't enter recovery but it could get into download mode, keep trying.
Hmmmm. Still doesn't work when I pull out the battery, plug in the usb cable, hold the volume + and - down, and put the battery back on. It just shows the battery charging.
i have something similiar just have battery showing and wheel spinning when connected to pc or AT&T logo flashing if powered on and can't get into download mode...How does one get back to reality at this point.
your phone does not have the button combinations required to enter either download or recovery mode. I guess what you should have done before doing anything to your phone was test the button combinations in case something screwed up. then you should have flashed stock with the odin package posted in the development forum with the 3 button fix. I had to do this for my friend's captivated after realizing the button fix was disabled, but I hadn't broken the booting of the phone then. but now to fix it, other than trying to use adb to reboot into download, I have no idea what to do.
Looks like you'll need to make a JIG. Here's one thread on it:
http://forum.xda-developers.com/showthread.php?t=841512
norcal einstein said:
Looks like you'll need to make a JIG. Here's one thread on it:
http://forum.xda-developers.com/showthread.php?t=841512
Click to expand...
Click to collapse
Made a jig with parts bought from Radio Shack.
the jig was a success to get the phone back to download mode

[Q] captivate won't boot after Axura clockwork

Help !!!!!!!!!!!!!!!!!!!!!!!!!!
hmy captivate died after flashing Axura using clockwork
now I can not boot up the phone, unplug the battery for 15 Min and put it back but still the same can not boot up the phone....
please help
You need to figure out a way to get into Download Mode, use ODIN, and flash back to JF6. Once you have JF6 running, you can flash whatever rom you want again.
If you search, you'll see a bunch of posts on the different methods to get to Download Mode.
Goodluck.
Yes, I know if I get download mode I can flash whatever rom, but the problem is that the phone completely dead nothing shown in the screen, I have tried the following
1- try the combination of Vol down + Power
2- try the combination of Vol up + Vol Down + Power
3- try Vol down and then connect USB
4- try Vol down + Vol Up and then connect USB
all these while opening ODIN
also I tried this on both windows 7, and windows XP.
do you have any other suggestions to do.
please help
Still have the problem, need heeeeeeeeeeeeeeeeeeelp please
How did it exactly die? It'd be useful for people who may know a solution. I've heard of JIG a few times.
you get the little home lights on the bottom of the phone to light up at least?
Also.. does the computer recognize the device?
If not and it's completely black screen and you don't even feel it vibrate while booting? Its toast.
But.. try doing the battery/sim card pull - hold down both volume buttons plug in the USB and jam in the batter and see if that works.
Or.. to the ATT warranty center you shall go.
I was flashing Axura rom using clockwork recovery, and after complete the installation and start reboot this back screen comes on, now not booting at all
Odin not recognize the phone, or even the computer does not detect any connected device,
I tried pull the battery, wait for 15 min then connect the USB, hold vol up, down and power keys then put the battery back while holding these three keys nothing happen, the screen still black and the computer not detect it.
I tired all ways but nothing works with me.
Now I think it is complete died, Even I tried the hair dryer trick but nothing works.
some posts talk about JIG
How this JIG works and how to do it?
up for heeeeeeeeeeeeeeeeeelp
hzeid said:
I was flashing Axura rom using clockwork recovery, and after complete the installation and start reboot this back screen comes on, now not booting at all
Odin not recognize the phone, or even the computer does not detect any connected device,
I tried pull the battery, wait for 15 min then connect the USB, hold vol up, down and power keys then put the battery back while holding these three keys nothing happen, the screen still black and the computer not detect it.
I tired all ways but nothing works with me.
Now I think it is complete died, Even I tried the hair dryer trick but nothing works.
some posts talk about JIG
How this JIG works and how to do it?
Click to expand...
Click to collapse
USB Jig will trigger the phone into Download mode.
******Soldering Required******
http://forum.xda-developers.com/showthread.php?t=819551
****Solderless version****
http://forum.xda-developers.com/showthread.php?t=841512
I followed JIG solution, connect resistants of 301K on pin 4,5 on mini usb head, nothing works still black screen, no at&t log nothing
help any new suggestion
try charging the phone for a few hours, if possible try a different battery.
also you may be in download mode with a black screen. i had a bad crash once from too much overclock or a corrupted kernel flash with the manhatten project 1.6ghz kernel. it corrupted the image files for bootup and download mode, my startup screen was garbage and had a black screen for download mode. but download mode still worked. start odin, it may still show device connected.
I did connect the JIG for 10 sec then disconnect it, then connect the phone to the computer while ODIN open, but nothing happen the computer still not detecting the phone, also the screen still black, it does not even any sign of responding except it get heated when connect it to charger.
guys as posted in other thread, will reward 75 US$ for who will help me getting my phone back to life
if you got the phone through at&t, you might as well just go exchange it for a new one. the people there won't be able to determine if you've voided your warranty if they can't boot your phone either.
sorry I did not got the phone from AT&T, I bought it from Ebay so I can not send it back to them

Bricked? Cant get download mode or startup HELP!

I Have the same problem I had installed 2.2 and saw that it had to many bugs, so I just tried to roll back to 2.1 and I thought the process was over because my phone was flashing my battery me witch was the little frozen circle and and empty battery meter, so I disconnected the phone cuz I thought it was done, took the battery out, put it back in and turned it on and the AT&T logo came on then black screen and it just kept doing that and wont even start up. now I cant even go back to recovery mode pressing volume up, down, together nothing, when I plug it in the computer or a/c outlet to charge it just shows me a blinking empty battery meter. pleassss help meeeee I'm freaking out! already read alot of forum but cant find it.
make a jig. and you posted in the wrong section.
read the whole thread. http://forum.xda-developers.com/showthread.php?t=841512
mdenisjr said:
I Have the same problem I had installed 2.2 and saw that it had to many bugs, so I just tried to roll back to 2.1 and I thought the process was over because my phone was flashing my battery me witch was the little frozen circle and and empty battery meter, so I disconnected the phone cuz I thought it was done, took the battery out, put it back in and turned it on and the AT&T logo came on then black screen and it just kept doing that and wont even start up. now I cant even go back to recovery mode pressing volume up, down, together nothing, when I plug it in the computer or a/c outlet to charge it just shows me a blinking empty battery meter. pleassss help meeeee I'm freaking out! already read alot of forum but cant find it.
Click to expand...
Click to collapse
Using your computer and usb cable, remove the battery from the phone. Plug the pc side of the cable into your pc. Put the battery back in the phone. Hold the volume up and volume down buttons. While holding the buttons, plug in the phone side of the usb cable and continue holding. You should be in download mode within a few moments. View my clip for a how-to video session on this...
Reply if this worked. It SHOULD work as you have soft bricked and this is a way of entering download mode during a soft brick of the phone.
http://www.youtube.com/watch?v=MsafJ-9uRqk
Look here this might help you.
USB jig
http://forum.xda-developers.com/showthread.php?t=819551
xredjokerx said:
make a jig. and you posted in the wrong section.
read the whole thread. http://forum.xda-developers.com/showthread.php?t=841512
Click to expand...
Click to collapse
This is your second option.
Any luck with suggested solutions?
nothing with just the buttons, but im fixing to buy the micro usb breakboard and see what happens
Or you can buy a JIG from me!
mdenisjr said:
nothing with just the buttons, but im fixing to buy the micro usb breakboard and see what happens
Click to expand...
Click to collapse
Did you try the volume button method with plugging in the USB cable into the phone while it's plugged into the computer? It sounds like you are just doing the volume buttons plus power button method. The JiG is for HARD bricks which doesn't sound like it's what you have. Although it will work for SOFT bricks also.
connexion2005 said:
Using your computer and usb cable, remove the battery from the phone. Plug the pc side of the cable into your pc. Put the battery back in the phone. Hold the volume up and volume down buttons. While holding the buttons, plug in the phone side of the usb cable and continue holding. You should be in download mode within a few moments. View my clip for a how-to video session on this...
Reply if this worked. It SHOULD work as you have soft bricked and this is a way of entering download mode during a soft brick of the phone.
Click to expand...
Click to collapse
First post, been lurking a while though. I actually had the same problem, and fixed it this way last night. Took me about 30 tries and lots of sweat before I figured it out though
connexion2005 said:
Did you try the volume button method with plugging in the USB cable into the phone while it's plugged into the computer? It sounds like you are just doing the volume buttons plus power button method. The JiG is for HARD bricks which doesn't sound like it's what you have. Although it will work for SOFT bricks also.
Click to expand...
Click to collapse
yeah I have been doing it with the cable connected to the computer and then hold down the buttons and connect the phone, but still all I see is the empty battery and black screen
mdenisjr said:
yeah I have been doing it with the cable connected to the computer and then hold down the buttons and connect the phone, but still all I see is the empty battery and black screen
Click to expand...
Click to collapse
how long did you hold the buttons up and down after you connected the cable? iv held it for 2 mins and nothing!
Ugh. This is the way to do the button combo:
Step 1 remove the battery, open odin3 the one click jh6.
Step 2 plug in the usb and hold the volume up, volume down, and power.buttons.
Step 3 put in the battery and release the power button but keep holding the volume up/down buttons.
Step 4 press download. This puts the phone in download mode. I found this method when I had a soft brick. Umyou don't need a jig since you can still boot to the white screen. This will work.
Sent from my GT-I9000M using XDA App
goob1284 said:
Ugh. This is the way to do the button combo:
Step 1 remove the battery, open odin3 the one click jh6.
Step 2 plug in the usb and hold the volume up, volume down, and power.buttons.
Step 3 put in the battery and release the power button but keep holding the volume up/down buttons.
Step 4 press download. This puts the phone in download mode. I found this method when I had a soft brick. Umyou don't need a jig since you can still boot to the white screen. This will work.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
I will try this method, as I am in the same boat as the others here. I have already placed my order for the USB Jig but am hoping that this method will work.
However, under step 4, you indicate that you "press download." What do you mean by this? Where is the "download" button? On odin3, the only buttons I saw were start and master clear. Is the download button an option on the Captivate?
To my knowledge, there is no "Download" button on ODIN or a Captivate in a semi-bricked state.
Edit:
If those directions don't work, you might also try a method I've had success with.
1. Remove battery, SIM card, and MicroSD (if you have one) from the phone
2. Wait at least 10 seconds with the phone having no power source
3. Hold Vol Up/Down, don't let go
4. Insert battery
5. If it worked, in a few seconds you should see Download Mode
http://forum.xda-developers.com/showthread.php?t=867892
I posted some suggestions in this thread...
good luck, dont give up
Axura CE RC2.1 w/ excalibur 2.1.6, ugjk4 modem, Voodoo, BlackFroyo theme
I think Im really screwed I have done everything that has been posted previosly and nothing seem to work. as soon I connect to my computer odin3 dose not do anything it's as though nothing is connected and my phone goes to that empty battery with the frozen loading star or what ever its called, it also does that when I connect it to the AC outlet.
Still waiting on the jig to arrive I think thats my last hope!
Why doesn't anyone use adb to get into download? The only time you HAVE use the 3 button is if you get phone!Pc screen. If your phone can get to the att screen, open command prompt, change directory to adb tools location, and type adb reboot download. Do all this before you hook your phone up to the computer. When you're ready connect phone to pc, turn it on, right after you see the att splash screen and hear that your phone is connected press enter.
Sent from my GT-I9000M using XDA App
majinzen said:
Why doesn't anyone use adb to get into download? The only time you HAVE use the 3 button is if you get phone!Pc screen. If your phone can get to the att screen, open command prompt, change directory to adb tools location, and type adb reboot download. Do all this before you hook your phone up to the computer. When you're ready connect phone to pc, turn it on, right after you see the att splash screen and hear that your phone is connected press enter.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
The button combo is soooo much easier than adb for newer people... And a lot quicker
Sent from my SAMSUNG-SGH-I897 using XDA App
goob1284 said:
The button combo is soooo much easier than adb for newer people... And a lot quicker
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
how do you use a adb to get into download mode? is there a link you can hook me up with instructions I would really appreciated it.

[Q] COMPLETELY Bricked Captivate - Need Help (USB jig and key combos don't work)

I was flashing this 3 button fix with Clockworkmod recovery. After applying the update from zip, everything seemed to be working fine, so I pulled the battery so I could test it out without having to use CWR's reboot option, then waiting for it to boot and shut off. When I tried to turn it back on, nothing happened. I tried to boot it with the recovery 3 button combo and it didn't respond(still a completely black screen).
Also, I'm not sure whether or not CWR was actually flashed. I was accessing using the update.zip found in this thread. When booting into recovery, I got into the normal recovery screen, and it was only after I hit "reinstall packages" that I got into CWR. It was through this method that I tried to install the 3-button fix.
What I've tried:
This key combo: http://forum.xda-developers.com/showthread.php?t=775911
The phone didn't respond at all.
Switching the battery for a fully charged one. Still no response.
Inserted my homemade USB jig to no avail. I've tested it with a different Captivate and I've confirmed that it works.
Anyone got any ideas or "magic" key combos I should try. If not, would it be possible to send it into Samsung/AT&T and get it repaired/replaced?
EDIT: I think I'm in the same situation as these guys: http://forum.xda-developers.com/showthread.php?t=977086
It's a build 1008 that I'm working with.
I'm on a similar issue. Phone is dead, no response to anything at all. Not even my previous jig that I used last time.
But it happened while I was flashing with Odin one click. Got stuck at the factoryfs.rfs step. Had to unplug it but after that I never came back up
I ordered a premade usb jig, and it'll arrive next week. If that doesn't work then I'm thinking of getting a cheap one off ebay, I can't spend another $500 considering this phone is only 4 months old.
The other choice is getting a broken phone for even less money, and replace the motherboard. But I don't know if there are considerable differences between phone batches.
I'll be Android-less for the next two weeks though, and that truly sucks.
Which build is your phone? It's located behind the battery to the left of one of the barcodes. I've heard that 2010 and 2012 break when used with odin one click.
Have you guys tried the volume up and down trick right after you put battery back in while its connected by usb to the PC? I bricked my phone to the point where it would not even turn on and finally was able to get it back into download by using that method. Kind of tricky but you plug phone into usb to pc. Take battery out, while holding volume up and down put battery in and keep holding until download screen comes up. I hope that works for you, if you havent tried yet
I have gone so far as to brick my phone to the point where it would not turn on. After a few hours it was only a screen RST_STATUS 0x0. The one post you linked says to hold vol up/down and power. But try not pressing power..only up and down. I could not get mine to do anything until I tried someone else's method of not pressing power and only volume buttons
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
My first time using Odin One Click presented me with a similar situation, stalled after it said "DO NOT UNPLUG..." ... I don't have a Jig but nothing else I tried was working...Held down power button to be presented with a black screen, no backlight or anything...
Pulled the battery out, waited a full 30 seconds (battery pulls less than that didn't work for me) and put it back in, Volume Up + Down and plugged in USB and it worked.
Best of luck to you. I was feeling kind of queasy after finding out my first attempt at flashing could have been disastrous.
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
This happened a few times to me. I remove the battery, open odin one click, hold up and down vol buttons, then plug in the usb cable. It typically throws me.back into dl mode. Be sure you are using JV6 (see Icezar's post in Dev section) when going back to stock because it doesnt include bootloaders and makes hard bricking less likely.
-- SGS i897 Captivate using:
Continuum 5.41 w/ Talon 1.7 [rfs all, OC/UV, TW4, no theme, no tweaks enabled, & NETFLIX!)
tigersunlimited said:
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
Click to expand...
Click to collapse
Oh thank u so much worked like a charm, wow. U saved my Sammy!
tigersunlimited said:
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
Click to expand...
Click to collapse
Gosh!! you are genius!! Even USB was not working but you save my captivate.
Bricked Samsung galaxy s2 i1900t
connexion2005 said:
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
Click to expand...
Click to collapse
Hi
I tried upgrading from ice cream sandwich to jellybean and ended up bricking my phone when the flashing failed and I panicked and unplugged my phone. I think it failed because i was flashing something for a different model rather than the i1900t as this is the New Zealand/Australian model. I cant find any button combos that will put my phone into download mode and the phone doesn't turn on. The only life that it seems to exhibit is get warm around the sim card area when i put the battery in. Help.
drdigby said:
Hi
I tried upgrading from ice cream sandwich to jellybean and ended up bricking my phone when the flashing failed and I panicked and unplugged my phone. I think it failed because i was flashing something for a different model rather than the i1900t as this is the New Zealand/Australian model. I cant find any button combos that will put my phone into download mode and the phone doesn't turn on. The only life that it seems to exhibit is get warm around the sim card area when i put the battery in. Help.
Click to expand...
Click to collapse
Download mode is vol down+power on the GB bootloaders. But if a JIG doesn't get you in download mode, there are 2 possible reasons: 1st- Battery isn't charged. 2nd- Your phone is bricked.
If it's the 2nd one then your only hope is with mobiletechvideos .com (Connexion2005 on xda). He can use his JTAG to push the GB bootloaders into your phone.
hard bricked samsung captivate....3 buttons not working
connexion2005 said:
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
Click to expand...
Click to collapse
hi I hard bricked my handset Samsung captivate sgh i897 while flashing only the pit file with odin......after which I get a black screen and the 3 buttons not working......will you kindly guide me in unbricking

Categories

Resources