Database Develop

[Q] How to Install JIT and App2SD on 2.1

im currently using Android 2.1 but i have no idea of how to install JIT or App2SD, Can anyone help me out
Thanks

Look here:
http://forum.xda-developers.com/showthread.php?t=946231
Sent from my E15i

when i click on the 2.1 link i downloaded it and when i extract the rar then it says 2.0.1 not 2.1.1 so.. and then i tried to give it a go through xrecovery but it didnt enable the JIT

I tried it, and it work (at both 2.0.1 and 2.1.1), although it seems to be the wrong version. Did you make a benchmark-test, like linpack from the market? Before JIT, the benchmark was ~5 MFLOPS, after JIT: ~7.6 MFLOPS. Try it!
Sent from my E15i

aaron187 said:
im currently using Android 2.1 but i have no idea of how to install JIT or App2SD, Can anyone help me out
Thanks
Click to expand...
Click to collapse
When I was using the stock rom, I use this topic to enable JIT on my phone.. I don't know if it will work again, but you can try..
http://forum.xda-developers.com/showthread.php?t=877565
But first, do a backup..
To install app2sd, you can see here how to
:http://forum.xda-developers.com/showthread.php?t=880387
Hope I could help

Very usefull, thanks a lot ...

[Q] How to switch from a rom using cm6 to cm7?

Hi all, I recently took the plunge into the world of custom roms and its awesome, so much better then stock
I have flashed my x8 with the Froyo 2.2.1/Cyanogenmod 6.1.3 rom by ponanovn and he has just released a new rom Gingerbread 2.3.5/Cyanogenmod 7.1-Pre using cm7, When I first installed the orginal Froyo 2.2.1 I used x recovery and simply renamed the file to update.zip and simply flashed it and it worked however on his page he doesnt say rename the file to "update,zip" anymore and he says make a back up in "cwm recovery" instead of xrecovery is it neccesary to use cwm recovery with cm7? im just a bit confused if anyone could help me I would be gratefull Thanks

Too complicated! Download and install GingerDX instead. It's a FULLY working Gingerbread 2.3.5!

Chris95X8 said:
Too complicated! Download and install GingerDX instead. It's a FULLY working Gingerbread 2.3.5!
Click to expand...
Click to collapse
Thanks I was having a look at it before and it seemed pretty good, might just make the change to GingerDX, are you using it? if so are there any bugs etc? cheers

Yes, I'm using v005. SO SMOOTH!!! And 3MP camera!! I have no bugs at all. If you have bugs, make a full wipe.

I can recommend GingerDX as well, it is updated on a regular basis, and doixanh is one of the best ROM developers for X8 currently, he just seems to be able to pull things off that noone expected, like the 3mp camera fix for instance!

I agree, GingerDX is the most complete 2.3 Rom. There is updates nearly every day and each update will preserve your data, no major bugs and if there is DX will sort it.

Thanks for the help

I would suggest GingerDX.
But you can try to use multiboot if you have a class 6 or more sd card instead of changing a ROM.

samyeung97hk said:
I would suggest GingerDX.
But you can try to use multiboot if you have a class 6 or more sd card instead of changing a ROM.
Click to expand...
Click to collapse
guys do you have any link to download gingerdx?

edward091810 said:
guys do you have any link to download gingerdx?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1188486
go on this page and download the latest version

guestekrnL-v1.8.1-HighOC not work on the stock rom v20_r ?

did dalvilk cache, and installed the 1.6.2 final, 1.7.0 final if, 1.8.1 and no work, the kernel is installed but does not record the commands gueste
I can do besides go v20_q
excuse the bad English

Same problem here. I can´t OC or set any option. Nothing is saved. Any Idea ?
Rom : Stock V20R
Kernel: guestekrnL-v1.8.1-HighOC

Sigges said:
Same problem here. I can´t OC or set any option. Nothing is saved. Any Idea ?
Rom : Stock V20R
Kernel: guestekrnL-v1.8.1-HighOC
Click to expand...
Click to collapse
discovered the cause of the problem. The problem is in busybox version 1.20.1. The solution was removela and install the 1.20

Hmmm, didnt solve the problem for me. There are more users having this problem and it is discussed in the kernel-thred in the developer section.
Sent from my LG-P990 using XDA

Sigges said:
Hmmm, didnt solve the problem for me. There are more users having this problem and it is discussed in the kernel-thred in the developer section.
Sent from my LG-P990 using XDA
Click to expand...
Click to collapse
friend after the procedure the busybox, full wipe>>> install kernel v1.6.2 guestekrnL after guestekrnL v1.7_SE-Final, and finally pass guestekrnL-v1.8.1-HighOC, okay

Guys need your help pls help me out !

Hi Guys ! DESPERATELY need your help guys
i have rooted optimus 2x and installed paranoid android 4.0.4 ! everything works fine for me but im not able to overclock my cpu can you please suggest me what should i do ?
and this custom rom consuming more ram, i just installed 5-6 apps and the remaining ram available is 100-70 mb ( is this the same or do i need any app to avoid this ! guys im waitng please do reply to this thread
or else please suggest me any other rom with ics which gives best performance

kkdsandeep said:
Hi Guys ! DESPERATELY need your help guys
i have rooted optimus 2x and installed paranoid android 4.0.4 ! everything works fine for me but im not able to overclock my cpu can you please suggest me what should i do ?
and this custom rom consuming more ram, i just installed 5-6 apps and the remaining ram available is 100-70 mb ( is this the same or do i need any app to avoid this ! guys im waitng please do reply to this thread
or else please suggest me any other rom with ics which gives best performance
Click to expand...
Click to collapse
Neither one of the things you just mentioned puts you in a state of desperate need of help...
Flash temasek's cm7, it's fast and stable.

hey dude
cn u please gimme that cm7 link ???

hey friend have you tried CM7 based Lezo OS. Its chinese rom which i have currently installed on my LG o2x. its best rom and it supports hardware acceleration and batt backup is more than 60hours of normal use without Wifi.
Links are here only for LG O2X:
everbox. com/f/AX5Y72eEY3kA56LMmFOMYUStjn"

kkdsandeep said:
cn u please gimme that cm7 link ???
Click to expand...
Click to collapse
If you want to stick with CM9 you must install a custom kernel. Try, for instance, harsh's kernel. You will find it in the development forum.

kkdsandeep said:
Hi Guys ! DESPERATELY need your help guys
i have rooted optimus 2x and installed paranoid android 4.0.4 ! everything works fine for me but im not able to overclock my cpu can you please suggest me what should i do ?
and this custom rom consuming more ram, i just installed 5-6 apps and the remaining ram available is 100-70 mb ( is this the same or do i need any app to avoid this ! guys im waitng please do reply to this thread
or else please suggest me any other rom with ics which gives best performance
Click to expand...
Click to collapse
You have to flash Harsh Kernel first! Then settings>performance and set your CPU frequence.
Remain on CM9... GB is boring... really...
Thanks button is here↓ !!! just use it

kkdsandeep said:
Hi Guys ! DESPERATELY need your help guys
i have rooted optimus 2x and installed paranoid android 4.0.4 ! everything works fine for me but im not able to overclock my cpu can you please suggest me what should i do ?
and this custom rom consuming more ram, i just installed 5-6 apps and the remaining ram available is 100-70 mb ( is this the same or do i need any app to avoid this ! guys im waitng please do reply to this thread
or else please suggest me any other rom with ics which gives best performance
Click to expand...
Click to collapse
If you seek stability from your rom i suggest you to flash Gingerbread rom because ICS still presents bugs like no hardware acceleration, camera problems and so on. In the development section you'll find a large variety of roms. For what concern the ram, android is designed to optimise the use of ram avaiable so you haven't to think as you're using windows's pc because a situation like yours is normal.

[Q] How I can overclock official stock rom?

Hello, anyone could help me?
I want to know how i overclock on official stock rom?
please, help me!
GT-5570 - Galaxy Mini

ricas1990 said:
Hello, anyone could help me?
I want to know how i overclock on official stock rom?
please, help me!
GT-5570 - Galaxy Mini
Click to expand...
Click to collapse
Search for a kernel that overclock and work with stock , i'm going to see for you.
Edit:Here is an overclock kernel for stock .

thanks for the time you lost to help me, this kernel works fine?

ricas1990 said:
thanks for the time you lost to help me, this kernel works fine?
Click to expand...
Click to collapse
I don't know I have GT-S5570I but you can ask in the thread, and don't forget to press thanks

I had experimented, and this kernel have many bugs, and have too much lag! but thanks

ricas1990 said:
I had experimented, and this kernel have many bugs, and have too much lag! but thanks
Click to expand...
Click to collapse
I could search for you for all overclock kernels that work with stock.
Edit: here is another kernel and I' m sorry for the first one.

I had experimented that kernel too, but didn't work on my, because this kernel is for the netherlands stock, but my stock is from portugal! thanks to searched, i have decided to change for cyanongenmod 7.2, is faster than stock!
Thanks!

ricas1990 said:
I had experimented that kernel too, but didn't work on my, because this kernel is for the netherlands stock, but my stock is from portugal! thanks to searched, i have decided to change for cyanongenmod 7.2, is faster than stock!
Thanks!
Click to expand...
Click to collapse
I think you can change to CM 10, for higher android version, some apps will work for you device that doesn't work for stock or CM7

Yes, I know that, I have experimented various and different roms, but I don't have much time. In summer, I will experimented cm10, and I'm still waiting for the developers of jenkins to finish the cm11!