Database Develop

[CM7.X/AOSP][KERNEL]Firekernel for Ace - 09.10.2012[TeamCooper]

Code:
#include <standard_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to use these modifications upon your own choice, and if
* you point the finger at me for messing up your device, I'll just sit and laugh at you.
*/
This kernel is based on the latest TheAceKernel http://forum.xda-developers.com/showthread.php?t=1606352 from skynet28. Big thanks to him.
FEATURES:
- most of TheAceKernel features
- battery driver made by LibiSC
- some improvements in idle support for ARM
- overlocked AHB clock at 800,768,729Mhz (improved graphic performance I think)
- some changes in net stack
- improved jhash
- patched lowmemorykiller from zImage-Mod (but it is still compatible witch memory tweaks scripts)
- kernel compression changed to XZ
- default governor is smartassV2 and removed lulzactive (doesn't works for me and made errors in dmesg)
- small changes in smartassV2
- partly disable vsync (I hope)
Hope that's all, my memory isn't good.
My sources: https://github.com/dragonnn/firekernel-ace
Download:
09.10.12
https://dl.dropbox.com/u/1664131/firekernel-09.10.12.zip
28.08.12
https://dl.dropbox.com/u/1664131/firekernel-28.08.12.zip
19.08.12
https://dl.dropbox.com/u/1664131/firekernel-19.08.12.zip
22.07.12
https://dl.dropbox.com/u/1664131/firekernel-22.07.12.zip
23.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma-23.06.12.zip
12.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma-12.06.12.zip
07.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma.zip - integrate AROMA Installer
04.06.12
https://dl.dropbox.com/u/1664131/firekernel-04.06.12.zip - for unofficial CM
https://dl.dropbox.com/u/1664131/firekernel-official-04.06.12.zip - for official CM (for now without torch, will fix it this evening or tomorrow).
http://dl.dropbox.com/u/1664131/firekernel.zip - for unofficial CM
https://dl.dropbox.com/u/1664131/firekernel-offical.zip - for official CM
Flash in recovery, but made a backup first!
For now only NON-OC version without AROMA installer, maybe that comes witch next updates.
CREDITS:
skynet28 for sources of TheAceKernel
an0nym0us_ for his zImage-Mod patches
ketut.kumajaya for blackhawk tools
LibiSC for the best battery driver
And other they patches I have used (don't remember all, just explored git repos for other phones on github).

Know bugs:
-
FAQ:
- For ROM developers, if you need the boot.img run form adb:
Code:
adb pull /tmp/boot.img
Or use qtadb, this is only way to get boot.img, and don't ask my for this on PM!
Changelog:
- update kgsl driver from teamhacksung
- update some arch specific files from teamhacksung too
- some other patches from teamhacksung (sensors, dram etc.).
29.05.2012
- screen of profile in the kernel, now when you turn of you screen you max cpu clock will by set to 320Mhz and min to 120Mhz! And when you turn it up it goes back to old clock! No need to use SetCPU screen of profile! Kernel based screen of profile is much faster and doesn't lag! Note: if you get lagy music when screen of that means you have to heavy EQ, disable it or use http://forum.xda-developers.com/showthread.php?t=1653140 works good without lag if you don't use REV or VR. Works witch any govenor
- small changes in smartassV2
Note about the update - I don't know why, but for my something sets after boot always ondemand as governor, I tried to add script to set smartassV2 as default but this doesn't work (strange), but you can easy set witch for example SetCPU/No-frills CPU Control.
31.05.2012
- create version for official CM
- update Samsung internal storage drivers and wifi driver
- new locale version
- clean up init scripts in ramdisk
- ondemand on boot bug should be fixed
4.06.2012
- finally disable vsync
- adjustable screen off profile, you can write a simple script to adjust the profile like this:
Code:
#!/system/bin/sh
echo "122880" > /sys/module/cpufreq/parameters/min_screenoff_frequency
echo "245760" > /sys/module/cpufreq/parameters/max_screenoff_frequency
Put into /system/etc/init.d/ and set permission, you can name it for example s99screenoff, you turn of the profile by writing this script:
Code:
#!/system/bin/sh
echo "0" > /sys/module/cpufreq/parameters/screenoff
- updates in zlib, vmalloc and kgsl
- update LibiSC battery driver
07.06.12
- triple buffer for framebuffer
- add oc support
- many changes in mmc driver
- sio as default I/O sheduler
- changes in kgsl driver
- fixed torch in official
- AROMA Installer package
11.06.2012
- fixes min backlight bug
- disable tripple buffer
- add 799Mhz step to save battery in non-OC
- fixes in cpufreq stats
- max in OC is now 844Mhz
- more steps in OC version
12.06.2012
- fixes OC support
23.06.2012
- new battery driver from LibiSC
- ported power supply form 3.4 kernel
- ported cpuidle from 3.2 kernel
- some changes in ext4 driver
- fixes temperature driver
22.07.2012
- update LibiSC battery driver
- some more steps in OC version
- enabled zcache
18.08.2012
- kernel compiled using gcc-linaro
- disable optimaztion for size
- optimaztion level changed to O3
- force to load module when not match version magic (no need to use kernel prefix -CLXXXX...)
- enabled memory compaction
- kernel uses mem{cpy,set}() for {copy_to,clear}_user()
28.08.2012
- battery driver back to 23.06 version witch some changes (should fix fast drop down under 20%)
- update sources to 2.6.35.14
- changes in RCU subsystem
- changes in mempolicy and ashmem
- update BFQ to v2 r1
- update Samsung modules for internal storage and wifi from KTQ
- new cool boot screen
07.10.2012
- complet rewrite and update the AROMA installer
- Add CyanMobileX support
- Fixes dead lock when system memory is low in ashmem
- Disable GENTLTE_FAIR_SLEEPERS for better perfomenc on Android
- Update BFQ to v3r1
- Add extract mode in installer - it can work on all 2.3.X ROM's (maybe stock ROM's too) but pleas don't report bugs when using this methode
- Some small changes in KSM, frontswap and cleancache
09.10.2012
- Fixed bootloop when using Adrenaline Engine (but if you allready have bootloop you need to wipe data and cache, sorry about that)
- redisable GENTLTE_FAIR_SLEEPERS

I'll wait for OC

Hi dragonn!!
I'm really happy to see that you're making your own kernel! I'll install it right away!
Just 2 questions, can i use it with last CM7 RC3 with everything working (especially the proximity sensor)? and is it updated (CL882825)?
Thank you man!

gbueno6 said:
Hi dragonn!!
I'm really happy to see that you're making your own kernel! I'll install it right away!
Just 2 questions, can i use it with last CM7 RC3 with everything working (especially the proximity sensor)? and is it updated (CL882825)?
Thank you man!
Click to expand...
Click to collapse
I don't know about the official CM, try yourself, on CM 7.2 by vo-1 works perfect. What did you mean witch "and is it updated (CL882825)"?

Great news, wonderful to see you carry on the great work of ketut, an0nym0us and skynet28 — this evolving Ace kernel is really a perfect example of how great open-source really is!!!
Nice name too! :cheers:

will my ace burn up in ashes ?
its too damm hot that kernel XD

dragonnn said:
I don't know about the official CM, try yourself, on CM 7.2 by vo-1 works perfect. What did you mean witch "and is it updated (CL882825)"?
Click to expand...
Click to collapse
I meant that in last kolja's build, the kernel is this one: 2.6.35.7-perf-CL882825. Other builds had a lower CL number (I can't remember which one) and it seems that this newer kernel is faster and less battery hungry.
So I just asked if you based your kernel in this last one or in the older ones (like ketut's I think).
Thank you very much! I'll test it ASAP!
Sent from my GT-S5830 using xda premium

gbueno6 said:
I meant that in last kolja's build, the kernel is this one: 2.6.35.7-perf-CL882825. Other builds had a lower CL number (I can't remember which one) and it seems that this newer kernel is faster and less battery hungry.
So I just asked if you based your kernel in this last one or in the older ones (like ketut's I think).
Thank you very much! I'll test it ASAP!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
For now it is CL562111, maybe when I found the sources of CL882825 will update it. Maybe in next release. Thanks for the idea.
EDIT
I search kolja's github but the sources have CL2X, and the latest update is 10 months ago :?.

dragonnn said:
For now it is CL562111, maybe when I found the sources of CL882825 will update it. Maybe in next release. Thanks for the idea.
Click to expand...
Click to collapse
You're welcome!!
Talk to ilarrain so he can help you because he compiled it some days ago!!
Thank you very much and have a great day!
Sent from my GT-S5830 using xda premium

nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.

an0nym0us_ said:
nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.
Click to expand...
Click to collapse
Hmm I know this (I have problems witch script setlocaleversion witch add to localeversion "+" a the end). But maybe kolja have update his sources, or changed something into it.

an0nym0us_ said:
nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.
Click to expand...
Click to collapse
Yes, sure you're right! I just thought that CL882825 was better or bug fixed compared to CL562111 (just what happened with SoD gone in official nightlies). I'm sorry!

Have it intalled now. Gonna report about bugs.
Sent from my GT-S5830 using XDA

My ace fell faster now.
TORCH DO NOT WORK
Sent from my GT-S5830 using XDA

eryst said:
My ace fell faster now.
TORCH DO NOT WORK
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Strange, watch app are you using, for mi it works witch native CM Torch and witch Widgetsoid from dekstop. And in Camera works too. I didn't change notching in the torch driver.

I have cm7-2012520 I quess. I use normal cm app. When i turn the torch on it fc.
Edit: works in camera app
Sent from my GT-S5830 using XDA

eryst said:
I have cm7-2012520 I quess. I use normal cm app. When i turn the torch on it fc.
Edit: works in camera app
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Maybe it is because you have official CM, it doesn't like other kernels. I don't use it so I can not help you.

dragonnn said:
Maybe it is because you have official CM, it doesn't like other kernels. I don't use it so I can not help you.
Click to expand...
Click to collapse
It does make sense so i'll flash last vo-1's build to be able to enjoy your kernel!
Just one last question: I see that there are no files inside lib/modules in your kernel so, do I have to install TheAceKernel first (it has those files) and then yours?
Thank you very much again!

gbueno6 said:
It does make sense so i'll flash last vo-1's build to be able to enjoy your kernel!
Just one last question: I see that there are no files inside lib/modules in your kernel so, do I have to install TheAceKernel first (it has those files) and then yours?
Thank you very much again!
Click to expand...
Click to collapse
Ohh, something have fails by creating zip :|, didn't se that, will fix it tomorrow, now I go sleep.
Wysłane z mojego GT-S5830 za pomocą Tapatalk

[KERNEL] ★ XS ICS v2.2 ★ 2.0GHz OC • S2W • 11 Governors • 6 Schedulers

XS ICS
The original 3.0 custom kernel for the Incredible S​
Disclaimer: Please read before continuing
This is a 3.0.x kernel, which means it is for ICS ROM's only.
You use this kernel and it's available settings at your own risk. I accept no responsibility for your phone, or anything that happens to it while using the feature. Although it has the ability to overclock to 2.0GHz, this may shorten the life of your device.​
Click to expand...
Click to collapse
The aim of this kernel is to be the most feature rich kernel available for the Incredible S. The kernel is the engine of your phone, and I want to include support for everything! If there is something you need and it isn't here, let me know and I will do my best to add it. XDA is a community, and lots of the work in this kernel has been discovered / and created by a wide range of people, all of whom this would not be possible. It is pretty impossible to name all of the people to thank, but know this is the result of a whole community, and my gratitude goes out to everyone who has contributed to this site!
Sources available in my github
Latest Version: v2.2 Attached To Post
Released 29/08/12​
Features
- Based of HTC Sources, patched all the way up to 3.0.42
- CPU Table The CPU table has been optimised to include the following freqs:
----------245MHz, 368MHz, 768MHz, 806MHz, 1024MHz, 1.2GHz, 1.4GHz, 1.5GHz, 1.7GHz, 1.8GHz, 1.9GHz & 2.0GHz
- Available CPU Governors Smartass v2, Lionheart, Conservative, Performance, On demand, lulzactive, scary, intellidemand, LagFree, Lazy & SavagedZen
- Available CPU Schedulers Simple I/O, Deadline, CFQ, Noop, BFQ & V(R)
- Available File Systems EXT3, EXT4, CIFS, NTFS (with UTF-8)
- Default Settings On Demand governor @ 245-1024MHz, Simple I/O scheduler
- Improved tolerance for low strength Wi-Fi
- Sweep2Wake
- DeepSleep enabled
- VDD Interface
Known Bugs
Please report any bugs you find, and I will endeavour to fix them
- There are several issues when using with IceColdSandwich, the camera will be very glitchy and the keyboard will be too large to fit on-screen
Planned Features
If it's in this list, please don't ask for it, I am aware and will be adding it when I can
- USB OTG Support
- USB Host
- 2-Way Call Recording
Don't forget to thanks this post if you like my work! Donations are not requested or expected, but are greatly appreciated ​
Click to expand...
Click to collapse

Changelog
29/08/12 - XS ICS v2.2
- Patched up to 3.0.42 (thanks to cjoliver)
- VDD Interface added
- Added 6 new governors: lulzactive, scary, intellidemand, LagFree, Lazy & SavagedZen
29/08/12 - XS ICS v2.1
The only way is up!
- Sweep2Wake fixed and fully implemented!
- USB OTG implemented (needs testing)
- Force unknown cable to be treated as A/C (should help with in-car chargers)
- Wi-Fi module issues should now be resolved
28/08/202 - XS ICS v2.0
Things can only get better...
- Switched to Koush's AnyKernel for maximum ROM compatibility (thanks to tpbklake for the suggestion)
- Patched up to 3.0.41 (big thanks to amidabuddha and mdeejay!)
- Added sweep2wake disabled by default, see below to enable, needs testing (thanks to show-p1984 for the functionality and coolexe for the patch to Amtel)
- Add BFQ v4 and V(R) I/O Schedulers (SIO still default)
- Wi-Fi PM = Fast
- Improved tolerance for low strength Wi-Fi
- Added extra values to CPU table (courtesy of amidabuddha)
24/08/202 - XS ICS v1.0
We're back baby!
- Inital Release
Click to expand...
Click to collapse
Instructions for S-OFF Users
Simply flash XS-ICSvX.X.zip in your favourite recovery!
Instructions for manual flashing (HTCDev.com unlocked S-ON Users)
Thanks to MrToastbrot for instructions
Step 1: Download the XS-Kernel.zip, then open the Zip on your computer and extract the file mkbootimg.sh in "kernel"
Step 2: Open mkbootimg.sh in a texteditor like notepad++ or notepad, then edit the following in line 3:
Code:
output /tmp/newboot.img
to
Code:
output /sdcard/newboot.img
Step 3: Save your edited file and place it back in your zip, copy your modified zip to your phone-sdcard and install it in the recovery. Then reboot your phone and connect it to pc and take the newboot.img from the root of the sdcard.
Step 4: Now reboot your phone into bootloader and flash it via fastboot flash boot newboot.img
Step 5: Once you phone has booted, mount the system as r/w using something like ES file explorer or Root explorer, then type the following:
Code:
adb push bcm4329.ko /system/lib/modules
Set permissions to rw-r--r--, reboot and enjoy!
Sweep2Wake: Q&A
Q: How do I disable / enable the feature?
A: Two options
Change the value in the file /sys/android_touch/sweep2wake to either 0 for disabled, 1 for enabled and 2 for enabled with backlight. This will be reset upon rebooting.
If your ROM supports init.d scripts, then flash the zip to enable or disable, this will stick over a reboot.
Q: It keeps taking screenshots when I lock the screen!?
A: This is due to an incompatibility with this feature and the native screenshot in Sense. TO stop the screen shots, you need to edit your build.prop and change the property ro.htc.framework.screencapture to false, and then reboot.

l0st.prophet said:
- 2-Way Recording
Click to expand...
Click to collapse
I'm using the miui v4 with nik's kernel and that function already work!
I'm wrong assuming it's already coded?
BTW good work!

Nice post, fast work. I'll have a play first chance I get. Thank you.

Nice. Downloading right now. Making a backup right now since I was thinking of flashing this new Google Now ZIP as well.
Also does this mean we can get CWM 6.0+? IIRC, one of the requisites for it was a ICS kernel to be able to compile it. Correct me if I'm wrong.

Which ROMs is it support?
MIUI will work whit this kernel?
Sent from my Incredible S using xda app-developers app

I have an S-OFF Vivo, so how do I flash this? Do I just install the zip from CWM?
I'm currently on IceColdSandwich, so what's the difference between the kernel used in that and this kernel?
Forgive my noobness but how is the file size only 100kb?

I have only test on MIUI v4, but it should work with any ROM, I would like some feedback if there are any ROM's it doesn't work with.
There is now a flashable zip on the first post, I made a proper schoolboy error when I first uploaded it, that is now fixed

l0st.prophet said:
I have only test on MIUI v4, but it should work with any ROM, I would like some feedback if there are any ROM's it doesn't work with.
There is now a flashable zip on the first post, I made a proper schoolboy error when I first uploaded it, that is now fixed
Click to expand...
Click to collapse
Thanks sir, great work!
Sent from my Incredible S using xda app-developers app

TheDareDevil said:
I have an S-OFF Vivo, so how do I flash this? Do I just install the zip from CWM?
I'm currently on IceColdSandwich, so what's the difference between the kernel used in that and this kernel?
Forgive my noobness but how is the file size only 100kb?
Click to expand...
Click to collapse
This is just a new kernel, that is why it is so small.
Did you read the OP and the second post? The instructions can be found there.

TheDareDevil said:
I have an S-OFF Vivo, so how do I flash this? Do I just install the zip from CWM?
I'm currently on IceColdSandwich, so what's the difference between the kernel used in that and this kernel?
Forgive my noobness but how is the file size only 100kb?
Click to expand...
Click to collapse
There is now a proper zip you can flash, check the second post for instructions.
The kernel in Ice Cold Sandwich is a Gingerbread kernel (2.6.x) which was modified to work with ICS (rather awesomely by Kaijura I might add). This kernel is built from the latest 3.0 sources.

Oh sweet! How did you manage to do it so fast?
One last question, none of my data will be lost right?

TheDareDevil said:
Oh sweet! How did you manage to do it so fast?
One last question, none of my data will be lost right?
Click to expand...
Click to collapse
I have been waiting for this since the OTA dropped
No data will be lost, but I would backup in case there is an issue with your install.

l0st.prophet said:
There is now a proper zip you can flash, check the second post for instructions.
The kernel in Ice Cold Sandwich is a Gingerbread kernel (2.6.x) which was modified to work with ICS (rather awesomely by Kaijura I might add). This kernel is built from the latest 3.0 sources.
Click to expand...
Click to collapse
Working smooth like butter on IceColdSandwich 8.4,one change is that my keyboard is larger
Sent from my Incredible S using xda premium

Awesome work!! I'm on miui v4 and Wi-Fi is working great but I ain't getting my mobile data working am I missing something?
I just flashed the zip. And I'm s-off.
Sent from my HTC Incredible S using xda app-developers app

Works great! Thanks a lot!)

Great work man!!!
I think that you can delete 1.7GHz, 1.8GHz, 1.9GHz & 2.0GHz
Because they are unstable

ragzdincs said:
Working smooth like butter on IceColdSandwich 8.4,one change is that my keyboard is larger
Sent from my Incredible S using xda premium
Click to expand...
Click to collapse
Shouldn't affect anything like that, can you flash back the original boot.img to confim it goes away?
lundberg512 said:
Awesome work!! I'm on miui v4 and Wi-Fi is working great but I ain't getting my mobile data working am I missing something?
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
Mobile data works fine for me, again shouldn't be affected by the kernel. I know MIUI has some issue with data anyway, check the thread in general to see how to fix that, but if that doesn't work, let me know.
Alex-stroev said:
Great work man!!!
I think that you can delete 1.7GHz, 1.8GHz, 1.9GHz & 2.0GHz
Because they are unstable
Click to expand...
Click to collapse
Different chips are more resiliant. I used to have one that could sustain 1.8GHz with no problem, but I sent it for repair as the screen got smashed, they sent a replacement and this one can't go over 1.5GHz without crashing instantly, the option is there for anyone who wants it though.

IceColdSandwich 8.3: looks good, only broke camera and rotate buttons, but I expected it
Edit: doesn't work gps and bluetooth, IceColdSandwich either has a lot of hacks, or would need it

Working fine here. Now to see how high of a OC I'm willing to work with hehe.

[Kernel][CM10/MIUI/PA][CM10.1] Kowalski Kernel - OLD BOOTLOADER ONLY for SU660

Kowalski Kernel for CM10/ CM10.1 - Stable release (SU660)​
This kernel supports the old bootloader only, modified to Optimus 2x su660 so I made this post to update users from the kernel by kowalski. I personally tried the kernels myself and I can assure you it's 101% working. I tried hard testing different kernels and I found this working great. Note: Kernel Kowalski still in the process of updating so, we are hoping for new updates soon.
I do not credit myself for this marvel work.
Keys all working this includes all. (Menu, Home, Back, Power and Volume rockers)
Downloads:
Kowalski kernel 100p5 for CM10 /MIUI v4 /ParanoidAndroid OLD BOOTLOADER - http://www.mediafire.com/?y0095ghxc4o8jdf
Kowalski kernel 100p5 for CM10.1 OLD BOOTLOADER - http://www.mediafire.com/?h4b6py36mmkd8b5
How to install:
Make sure youre on the Old Bootloader.
Be sure you're on proper ROM (CM10/CM10.1)
Be sure on latest CWM
Download the kernel you're in.
Copy to storage.
Go to recovery
Clear cache and dalvik.
Install zip.
Reboot.
Click to expand...
Click to collapse
Features
* Compiled in release mode (all debug stripped)
* Battery friendly, performance aware
* 3G modem runtime/suspend idle mode support
* Enhanced wifi power management
* Runtime wifi power management control via sysfs
* Bluetooth deep sleep without disconnections
* OC up to 1.2 GHz on stable releases and up to 1.5 GHz on experimentals
* Dynamic FSync by Faux123, backported from Linux 3.4
* 32M ramhack on the new bootloader, 24M on the old one (for now)
* ROW scheduler by Qualcomm, backported from Linux 3.4
* BFQv5 scheduler, backported from Linux 3.4
* Dynamic Interactive governor, backported from Linux 3.2
* Interactive governor aligned with Google's upstream sources (Linux 3.4)
* Simplified cpu hotplug, the second core will turn off in deep sleep mode
* Single/Dual core mode
* Support for notification lights on compatible roms
* Proportional Rate Reduction for TCP to increase network reliability
* Westwood TCP congestion algorithm enabled by default
* Support for NTFS (read only) and HFS+ filesystems
* Support for NFS 3/4
* Support for custom leds brightness from userspace
* Support for USB fast charge [ Don't keep it active when connected to a pc or it may damage your usb ports. It's meant for fast charging when using car/plane adapters for example ]
* Comes bundled with Kowalski Manager by wfd
Click to expand...
Click to collapse
Change Log
100p5 - 2013/03/03
* Fix derp in voltage table
Click to expand...
Click to collapse
Known Bugs/Problems
* On ICS the brightness controls don't work yet, but automatic brightness does
Click to expand...
Click to collapse
* In Kowalski Manager you can change the power management settings of the wireless card:
- PSP Power Saving Mode ---> your wifi card will use Max PSP when asleep. The kernel default is to sleep in Fast PSP mode.
- Awake Power Management ---> your wifi card will use Fast PSP when awake if enabled, otherwise will use CAM mode.
- Hotspot Power Management ---> when enabling hotspot mode, your wifi card will use Fast PSP if enabled, otherwise the default is to use CAM mode.
CAM (Constantly Awake Mode)
Keeps the client adapter powered up continuously so there is little lag in message response time.
Consumes the most power but offers the highest throughput. Is recommended for desktop computers and devices that use AC power.
Fast PSP (Power Save Mode)
Switches between PSP mode and CAM mode, depending on network traffic. This mode switches to CAM when retrieving a large number of packets and switches back to PSP after the packets have been retrieved.
Is recommended when power consumption is a concern but you need greater throughput than that allowed by Max PSP.
Max PSP (Max Power Savings)
Causes the access point to buffer incoming messages for the client adapter, which wakes up periodically and polls the access point to see if any buffered messages are waiting for it. The adapter can request each message and then go back to sleep.
Conserves the most power but offers the lowest throughput. Is recommended for devices for which power consumption is the ultimate concern (such as small battery-powered devices).
Source will be pushed to my github about 2 or 3 days after a release, to make sure that no major bugs are introduced in the public repository.
This kernel can be compiled with any gcc 4.6.X that supports graphite loop optimizations, so if you want to compile it by yourself you'll have either to build your own toolchain (for example using crosstool-ng), or use one of the many linux prebuilt ones (for example Linaro or CodeSourcery). Make sure they're 4.6.X. Earlier versions may complain a lot and generate and unstable kernel. Please test it thoroughly before releasing it with your rom.
Click to expand...
Click to collapse
Thanks
* pengus77 for this magnificent kernel
* wkpark for unlocking the ics bootloader and his genius ideas for implementing ramhack
* linus, well, for the linux kernel
* massimo69, stonebear, tetsuo55, wfd and carloit for taking the risks of testing possibly harmful pre-releases
* qualcomm, because codeaurora is awesome !
* benee, for his perfect any-kernel installer !
* wfd, for his fantastic Kowalski Manager App !
Click to expand...
Click to collapse
Original thread for the kowalski http://forum.xda-developers.com/showthread.php?t=2097788
Note: I do not credit myself for this, I just want to help other su660 users. :victory:
I'm not responsible if your phone explodes.

I've tried the one for CM10/PA and everything is going well until upto 2-3mins, then it just Freeze my phone.
I don't even know why?
all settings are on default
anybody else tried it too?

genemini said:
I've tried the one for CM10/PA and everything is going well until upto 2-3mins, then it just Freeze my phone.
I don't even know why?
all settings are on default
anybody else tried it too?
Click to expand...
Click to collapse
Old bootloader kernel? Most freezes came up with regarding to voltages settings or either the governors and I/O, try playing with different settings and find out what's works best for you. I haven't any encountered such freezes at the moment.

takeoutttt said:
Old bootloader kernel? Most freezes came up with regarding to voltages settings or either the governors and I/O, try playing with different settings and find out what's works best for you. I haven't any encountered such freezes at the moment.
Click to expand...
Click to collapse
Thank you for building Kowalski Kernel 100p5 for SU. I use it with CM10.1 newest very stable. Could do you build KK exp:120 for SU? I hope you building.

nguyenletuquynh said:
Thank you for building Kowalski Kernel 100p5 for SU. I use it with CM10.1 newest very stable. Could do you build KK exp:120 for SU? I hope you building.
Click to expand...
Click to collapse
Hopefully in future updates :good:

Can you create a tut to make a kk for su660 from kk for p990, so that we can do it ourself :?

i have problem with candy crush
ve got a problem with candy crush saga on a CM10.1, latest kernel from Kowalski
When i start the game, no problem. But when i hit the play button the screen starts flashing, the music starts and the touchscreen responds. The phone keeps on working as supposed to. I can shut the game with the home button.

[Kernel][4.4.2] Falter v1.1 (ElementalX port)

Kernel based on 3.4.10-gd597c14 sources from HTC. Every single commit was carefully cherry-picked from @flar2 repos
Kernel for rooted Stock Sense 6.0 ROM and MaximusHD 13. Aroma scripts where tested in TWRP 2.7.0.1
This is my first custom kernel project) Thanks to open xda community for a lot of materials, tutorials and open source code.
Main features
Wake Gestures. Configure using Sense 6 Toolbox
S2W, S2S, DT2W. Configured in Aroma menu
exFat support
Memory optimizations
Overall performance optimizations
Undervolting. Default - stock settings
Linaro gcc 4.9.1 arm-cortex_a15-linux-gnueabihf
Bugs
exFat sd card not visible
If you need exFat, please, add this to /system/etc/init.d/99falter before exit 0 line (last line):
Code:
insmod /system/lib/modules/exfat.ko
Link updated with fixed version, new users are not affected by this bug.
Falter-v1.1 Kernel
Source: GitHub
Compiler: Linaro GCC 4.9.1
Kernel Version: 3.4.10
defconfig: dlxp_ul_defconfig
Download Falter 1.1 release from GitHub
XDA:DevDB Information
Falter for Android 4.4.2, Kernel for the HTC Butterfly S
Contributors
Matri}{
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2014-07-22
Created 2014-07-15
Last Updated 2014-09-10

Wake gestures seem to work properly.
But internal µSD (64G exFAT) and USB OTG (USB key 16G FAT32) not work.
Not bad for a first release

Works flawlessly especially d2w and s2w.thanks Matrix to bring bs alive. Appreciated.
Edit: tested on insert coins 2.5 ROM.
Sent from my HTC Butterfly S using XDA Premium 4 mobile app

migascalp said:
Wake gestures seem to work properly.
But internal µSD (64G exFAT) and USB OTG (USB key 16G FAT32) not work.
Not bad for a first release
Click to expand...
Click to collapse
That's most likely because the 4.10 series of the stock ROM uses a 3.4.10-g6650ca5 kernel while the 3.4.10-gd597c14 used as a base for this kernel is from the previous, 3.06 series, i.e. Android 4.4.2, Sense 5.5. And the functionality (exFAT, OTG) requires loadable modules which will only work with the matching version of the kernel.
A possible solution would be if @Matri}{ modified the config and made all drivers builtin instead of modules, but I'm not sure this is possible. (For instance, I'm not sure the texfat driver is open-source… It doesn't appear to be present in the source tree.) Maybe some extra scripting with the initramdisk and bundling the binary modules there might be possible, but I've never done this with Android.
Other than that, we can only wait until HTC releases the sources for the 3.4.10-g6650ca5 version of the kernel.

thank you for your explanations.
It only remains to wait for the kernel sources for Wake on Gesture.
Or wait for the next Butterfly

migascalp said:
thank you for your explanations.
It only remains to wait for the kernel sources for Wake on Gesture.
Or wait for the next Butterfly
Click to expand...
Click to collapse
thank you for this...how do i revert back to stock kernel?

It is possible to add exFAT support. Not sure about OTG

pkalltheway2000 said:
thank you for this...how do i revert back to stock kernel?
Click to expand...
Click to collapse
Do you nandroid backup before flash the kernel, if yes you can restore back the rom.
If not you need to reflash your current rom without wipe anything.

pkalltheway2000 said:
thank you for this...how do i revert back to stock kernel?
Click to expand...
Click to collapse
dioooi said:
Do you nandroid backup before flash the kernel, if yes you can restore back the rom.
If not you need to reflash your current rom without wipe anything.
Click to expand...
Click to collapse
Or just take the boot.img from the matching OTA package (from here, for example) and use fastboot to flash it.

@Matri}{
To use internal μSD is already a good thing. OTG is less useful in this case.

Just a thought: would it be possible to bundle all loadable modules in the initramfs and then get a custom script to execute at startup, which would mount a tmpfs over /system/lib/modules and copy all bundled .ko files in there? If the script was executed sufficiently early on, I believe it should solve the issues. (I don't have the time right now to look at Android's /init and check if this is possible or not…)
Storage-wise, the boot partition should be large enough to accommodate the extra ~5 MB of modules.

koniiiik said:
Or just take the boot.img from the matching OTA package (from here, for example) and use fastboot to flash it.
Click to expand...
Click to collapse
Thank you!
Would you happen to know how to edit double tap to wake frequency? Eg. i find that i cannot double tap too fast or too slow to wake up the screen. any ways to change that?
Thanks!

any improvements in the battery life who have installed it ? or same as stock , if same as stock I am happy to flash it as i badly need tap to wake
@Matri}{ i did install and everything seems smooth so far i did install the gama control thingy during the aroma , what app do i use to control or tweak the gama , i tried using Faux it doesnt work

installed the kernel and the battery is mostly on par....it doesn't drain per se but it is using a bit more battery.....also, i find it that the phone state wakes up my phone a bit more than stock kernel....other than, all is good...the kernel is stable...double tap to wake or sweep 2 wake works 95% of the time...once you are used to the tapping frequency....
i just one question, how do i edit the value in sys\android_touch...i wanna enable sweep to sleep and i tried changing the value and save, but it doesn't save....anyway to make the file to save?

pkalltheway2000 said:
Thank you!
Would you happen to know how to edit double tap to wake frequency? Eg. i find that i cannot double tap too fast or too slow to wake up the screen. any ways to change that?
Thanks!
Click to expand...
Click to collapse
It is possible, but I think, that is not a key of the problem. There was a bug, when device goes to deepsleep and the only fix for now - reset touchscreen during IRQs. As a side effect - lags of dt2w. Try to do this to better understand is it because of timeouts or i2c bus resets:
1. Connect your device to usb/ac. In this state i2c bus is not suspended while screen off
2. Turnoff screen.
3. Double tap to wake. If lags then I need to fix resets during dt2w
Will make changes to dt2w to fix few usecases but anyway - gestures are more reliable for now
anirudhks said:
any improvements in the battery life who have installed it ? or same as stock , if same as stock I am happy to flash it as i badly need tap to wake
@Matri}{ i did install and everything seems smooth so far i did install the gama control thingy during the aroma , what app do i use to control or tweak the gama , i tried using Faux it doesnt work
Click to expand...
Click to collapse
I'm using Trickster MOD and I found that there is no gamma and white balance, only color modifications. I can implement full interface in case someone need it.

pkalltheway2000 said:
i just one question, how do i edit the value in sys\android_touch...i wanna enable sweep to sleep and i tried changing the value and save, but it doesn't save....anyway to make the file to save?
Click to expand...
Click to collapse
Please, edit /etc/falter.conf to change such settings. FYI, s2s is not working on most of our devices. Trying to fix that now.

Matri}{ said:
Please, edit /etc/falter.conf to change such settings. FYI, s2s is not working on most of our devices. Trying to fix that now.
Click to expand...
Click to collapse
thank you very much.... i tried that....s2s works on my bs, but then again, when i tried to disable it by editing the value to 0 in falter and restart, the s2s still works if i have the screen on....
the only way it seems to disable s2s is by turning off wake gestures completely in sense 6...however that also render s2w non-functional too...
also s2s only works from right to left (on the buttons) no matter if i changed to disable or left to right....it seems in aroma installer, it works on the default setting no matter which you you ticked....
thank you and it's nice to know that fixes are coming....thank you very much for your time and effort on porting it to our beloved bs....

i Found my device cannot mount SD card after install this KERNEL
i Found my device cannot mount SD card after install this KERNEL, thanks

xiaoyuer5 said:
i Found my device cannot mount SD card after install this KERNEL, thanks
Click to expand...
Click to collapse
Please, provide more details about your sd card. exFat? 32 or 64 Gb? Thanks

Thanks! Or as you guys would say, спасибі Hope to see more from you

LineageOS 19.1 (Android 12L) for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 BETA

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 19.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @rINanDO and @ChronoMonochrome for all your work which helped me a lot.
This is a BETA build, also on the LineageOS side, so don't install it if you want a complete and stable rom and don't report my already listed bugs!
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boot
Bluetooth
Audio
Graphics
Cameras
Sensors
GPS
Wifi
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
RIL
sec_keyboard docking station
much more...
Spoiler: Whats not working
Random reboots
Long screenshot
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
N8000 / N8005 Rom
N8010 / N8013 Rom
N8020 Rom
ROM Mega
Magisk zip file
Spoiler: Changelog
23.11.2021
29.11.2021
01.12.2021
26.12.2021
28.12.2021
04.03.2022
15.03.2022
26.03.2022
03.04.2022
04.04.2022
20.04.2022
27.04.2022
06.05.2022
25.06.2022
23.09.2022
20.01.2023
Spoiler: Don't like my boot picture?
If you don't like it, reboot into recovery and type the following command:
adb shell (or use TWRP's terminal)
bash /data/param_restore.sh
reboot
Uploaded a prepared package to build your own boot picture
https://androidfilehost.com/?fid=7161016148664799666
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
In some cases the sim card becomes unusable while typing in the code.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][12.x][N8000/N801x/N8020][BETA] LineageOS 19.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2021-11-18
Last Updated 2023-01-20

Wow, looking forward to a new beginning

Kindly add the original bootsplash script to restore to original bootsplash ...
This rom changed my bootsplash. Pls add the zip to revert it if anyone want to switch back ....
The rom is running super smooth without gapps
Bugs -:
•) The Quick Settings in Portrait mode is not adjusting to the device size ...
The notifications also get squeezed
•) Lock Icon on lockscreen is upside-down
•) Taskbar Modification from settings not working
I'll add more if I found
Thx
@html6405

Also, does this rom support OTA ?
And is there any Device Group on telegram or anywhere else ?

Ayushskull said:
Kindly add the original bootsplash script to restore to original bootsplash ...
This rom changed my bootsplash. Pls add the zip to revert it if anyone want to switch back ....
Click to expand...
Click to collapse
Check out this post:
LineageOS 18.1 Android 11 for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 Beta EOL
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in...
forum.xda-developers.com
Ayushskull said:
Bugs -:
•) The Quick Settings in Portrait mode is not adjusting to the device size ...
The notifications also get squeezed
•) Lock Icon on lockscreen is upside-down
•) Taskbar Modification from settings not working
Click to expand...
Click to collapse
You're right, there are many more bugs, many settings are still missing / incomplete.
It's in a real early stage.
Ayushskull said:
Also, does this rom support OTA ?
And is there any Device Group on telegram or anywhere else ?
Click to expand...
Click to collapse
Yep, OTA does work and no, there is no group.

Which branch did you use to build the ROM? Is the repo manifest available somewhere?

SD card used for extra tablet storage failed too........

chgans said:
Which branch did you use to build the ROM? Is the repo manifest available somewhere?
Click to expand...
Click to collapse
lineage-19.0, but they aren't up to date, I will push them soon.
aliveday said:
SD card used for extra tablet storage failed too........
Click to expand...
Click to collapse
Thx, i thought that it will be the same case, it's the same Kernel .
If the sdcard is formatted as a portable storage, it should work.
But this bug is listed above.

html6405 said:
lineage-19.0, but they aren't up to date, I will push them soon.
Thx, i thought that it will be the same case, it's the same Kernel .
If the sdcard is formatted as a portable storage, it should work.
But this bug is listed above.
Click to expand...
Click to collapse
I will keep hope this can be fixed！In the process of trying this, i found that the TWRP of another phone can format the SDcard, Is it possible to add this feature to our TWRP, but the recovery partition of our device is a bit too small.

aliveday said:
I will keep hope this can be fixed！
Click to expand...
Click to collapse
Me too ,
aliveday said:
i found that the TWRP of another phone can format the SDcard, Is it possible to add this feature to our TWRP, but the recovery partition of our device is a bit too small.
Click to expand...
Click to collapse
I had to remove some file systems from TWRP because of the limited space,
but TWRP should be able to format your sd card to exfat.

html6405 said:
Me too ,
I had to remove some file systems from TWRP because of the limited space,
but TWRP should be able to format your sd card to exfat.
Click to expand...
Click to collapse
If there is a trade-off, i suggest the language file can be deleted. just keep English，the TWRP operation is very simple.

aliveday said:
If there is a trade-off, i suggest the language file can be deleted. just keep English，the TWRP operation is very simple.
Click to expand...
Click to collapse
This would only work for not official versions,
in the official TWRP, we are already using the small language pack.
But I will have to find some space anyway for the next release.

Update 23.11.2021:
Fixed Bluetooth
Brought Livedisplay entry in settings back
Fixed partly Tethering

html6405 said:
Update 23.11.2021:
Fixed Bluetooth
Brought Livedisplay entry in settings back
Fixed partly Tethering
Click to expand...
Click to collapse
Thank you for all your hard work! I'm running this ROM currently and so impressed by the smoothness and speed throughout. Thanks again!

Hey, are you interested in making OC profile for them?, I wanna help
I can beta test / private test them and adjust voltages, I would have done that myself by decompiling the kernel to change the CPU0 seems kinda hardish right now since I don't have a lot of experience with that
I remember people were running the CPU around 1700-1750Mhz ish mark same on the 8" and Note 2
also, I noticed the GPU in this kernel isn't appearing in apps for some reason
after digging in I found it runs at 533mhz, the mali400MP can run at 600mhz
you can still make the kernel "Overclockable" by leaving it at stock speeds but adding 4-6 more tiers to scaling ava freq after 1600MHz as:
1650
1700
1725
1750
1775
1800
Edit/Forgot to say: I did some tests with it Running at performance governer at 1600mhz, it was a way smoother and far better experience, the interactive one either isn't fast enough or bad, I got around 300-400extra points in PC mark (from 2600 to 2950 average) that's around 14% increase in performance!

LightingX said:
Hey, are you interested in making OC profile for them?, I wanna help
Click to expand...
Click to collapse
Hi,
the kernel is already to the highest usable level overclocked.
I've enabled all the frequencies up to 1800 earlier (LOS16), but everything over 1600 MHz was too unstable,
so I've removed them.
LightingX said:
by leaving it at stock speeds
Click to expand...
Click to collapse
stock speed is 1400 MHz .
LightingX said:
Edit/Forgot to say: I did some tests with it Running at performance governer at 1600mhz, it was a way smoother and far better experience,
Click to expand...
Click to collapse
That's true, but it's less energy efficient, I recommend everybody to use Kernel aduiator to switch to performance after every boot (if they want to use it).
The problem is if I reenable the higher frequencies, people will try to overclock and land in a bootloop,
then they claim me for doing this...

html6405 said:
Hi,
the kernel is already to the highest usable level overclocked.
I've enabled all the frequencies up to 1800 earlier (LOS16), but everything over 1600 MHz was too unstable,
so I've removed them.
stock speed is 1400 MHz .
That's true, but it's less energy efficient, I recommend everybody to use Kernel aduiator to switch to performance after every boot (if they want to use it).
The problem is if I reenable the higher frequencies, people will try to overclock and land in a bootloop,
then they claim me for doing this...
Click to expand...
Click to collapse
can you at least provide the modified kernel boot.img with a warning?
I used to run this thing on a 1704Kernel if I remember correctly
the stock speed is in fact 1.4ghz, maybe I remember stuff from the note 2
I use FKM it works pretty well with me

LightingX said:
can you at least provide the modified kernel boot.img with a warning?
Click to expand...
Click to collapse
That would be possible.
LightingX said:
the stock speed is in fact 1.4ghz, maybe I remember stuff from the note 2
Click to expand...
Click to collapse
Its the same on note 2 , 1400 MHz on stock.

html6405 said:
Update 23.11.2021:
Fixed Bluetooth
Brought Livedisplay entry in settings back
Fixed partly Tethering
Click to expand...
Click to collapse
I still can't believe it, I already want to see it with my own eyes, brother, your work is incredible, thank you very much.

Hello,
Guys, I don't know if there will be a solution. But I read that Google intends to end the support of applications that use 32bis processors and it is already mandatory for developers to provide the 64bit version. And already have apps only in the 64bit version on the Play Store. The question is: Will we have a way around this and install 64bit apps on our tablet? Our old man still has a lot of wood to burn with the help of our friend Html6405 who is bringing Android 12 to us.