SetCPU and MIUI ROM - Huawei Ideos X6

With any of the MIUI versions Setcpu does not work properly. The "main profile' works fine, but when I try to add other profile, I just can not move the 'min' and the 'priority' slider bar( 'priority' slider works sometimes after, say, 10 attempts). But the "min" slider just gets stuck at the min freq. ie 122Mhz, can not move it. It is true with any Miui with any kernel. Even if we change the colour theme of Stcpu, the 'main' profile gets changed but not the other profiles.
I have flashed uc kernel ver. 4 (xtreme) meant for miui and it is great... thanks napstar

bro im using miui latest version nd setcpu works nicely...
superuser permission is needed....
Sent from my CSL-MI410 using xda premium

nesvaliya said:
bro im using miui latest version nd setcpu works nicely...
superuser permission is needed....
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
did you add some other profiles( other than the main) and try to adjust the 'min' frequency slider and 'priority' slider?

im facing problem to adjust 'min' and 'priority' while using profile other than main... but max , scaling and profile is running very well.....
Sent from my CSL-MI410 using xda premium

I'm having this same problem... Did you ever find an answer?

no prob. here
install latest superuser & update binary script, then disable older version by using titanium backup..
regrant root permissions to setcpu..

SetCPU works fine on the latest MIUI, I also got the slider problem the first time, thought it was prob with SetCPU however later realised it is a problem with the alignment of the slider and where you touch, touch above the slider not on it and it will function smoothly

vijayar said:
SetCPU works fine on the latest MIUI, I also got the slider problem the first time, thought it was prob with SetCPU however later realised it is a problem with the alignment of the slider and where you touch, touch above the slider not on it and it will function smoothly
Click to expand...
Click to collapse
as of now I am on cm7 , next time when i flash miui i will follow your suggestion.. thanks

nitindeck said:
no prob. here
install latest superuser & update binary script, then disable older version by using titanium backup..
regrant root permissions to setcpu..
Click to expand...
Click to collapse
after doing all these also i did find the mentioned problem.... i guess whatever Vijayar is telling is the reason...

vijayar said:
SetCPU works fine on the latest MIUI, I also got the slider problem the first time, thought it was prob with SetCPU however later realised it is a problem with the alignment of the slider and where you touch, touch above the slider not on it and it will function smoothly
Click to expand...
Click to collapse
Thanks Vijayar.... yes now it is working...

vijayar said:
SetCPU works fine on the latest MIUI, I also got the slider problem the first time, thought it was prob with SetCPU however later realised it is a problem with the alignment of the slider and where you touch, touch above the slider not on it and it will function smoothly
Click to expand...
Click to collapse
Oh wow, I never even thought of this! It works Thanks

anyone have experience with incredicontrol ?
i seen this on the sd kernel thread, but i had no idea how to use it.

Related

Overclock widget.. stays at 383mhz?

I have installed this widget.
Is'nt it possible to fix the cpu speed at 527mhz? if I do so in overclockwidget, the phone freezes up.
the only setting it works with is minimum: 383mhz maximum: 527mhz And like this it always stays at 383mhz... How come?
And how do I fix the cpu setting to be @ 527mhz?
J!tH said:
I have installed this widget.
Is'nt it possible to fix the cpu speed at 527mhz? if I do so in overclockwidget, the phone freezes up.
the only setting it works with is minimum: 383mhz maximum: 527mhz And like this it always stays at 383mhz... How come?
And how do I fix the cpu setting to be @ 527mhz?
Click to expand...
Click to collapse
If you read the instructions you need to root your device before this widget can work.
I have a rooted magic and it works like a charm for me.
njakobs said:
If you read the instructions you need to root your device before this widget can work.
I have a rooted magic and it works like a charm for me.
Click to expand...
Click to collapse
I have root... Im using JAChero 2.7.3 ROM
What is your settings?

[rom] miui 1.11.4

This is my first dev work in porting moto triumph miui 1.11.4 to our device, & i've succeed...
Here is the download link:
http://www.4shared.com/zip/2HieIHBj/miuiandroid_fb0-1114-110911-3.html
Differences between this & tj style miui 1.11.11 are:
1. No more in call volume issue
2. LED light for notification blinking (pls set to default green, otherwise it blinking red)
3. No more screen blinking during call (proximity problem fixed)
For other features, pls google miui 1.11.4 changelog.
My advise, after flashing pls ask yr friend to call u, then check yr in call volume level by pressing volume up button (bcoz in the process of booting & rebooting u press the volume level hardly), now make it maximum. I dont hv any in call volume issue until now....
Should i ask donation for this rom dev work? I dont know, just like to do this, but if u willing, my paypal ac is at [email protected]
Enjoy this & gv yr comments
Sent from my CSL-MI410 using xda premium
zukriaksah said:
This is my first dev work in porting moto triumph miui 1.11.4 to our device, & i've succeed...
Here is the download link:
http://www.4shared.com/zip/2HieIHBj/miuiandroid_fb0-1114-110911-3.html
Differences between this & tj style miui 1.11.11 are:
1. No more in call volume issue
2. LED light for notification blinking (pls set to default green, otherwise it blinking red)
3. No more screen blinking during call (proximity problem fixed)
For other features, pls google miui 1.11.4 changelog.
My advise, after flashing pls ask yr friend to call u, then check yr in call volume level by pressing volume up button (bcoz in the process of booting & rebooting u press the volume level hardly), now make it maximum. I dont hv any in call volume issue until now....
Should i ask donation for this rom dev work? I dont know, just like to do this, but if u willing, my paypal ac is at [email protected]
Enjoy this & gv yr comments
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
Thanks and downloading, will flash and revert. BTW wanted to check, Were you not able to do the changes you had done on Isaac's 1.11.25 release ?
1.11.25 done by cowsgo, not me
Sent from my CSL-MI410 using xda premium
zukriaksah said:
1.11.25 done by cowsgo, not me
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
Thanks, i am asking something else, nevermind now,
very slow download possible to upload to some faster site (megaupload etc.)
I think a way of porting done by cowsgo was tru cross-checking with tj style 1.11.11, so a lot of changes hv been done, for me i dont want to lose a sense of new rom, so i minimize the changes, just necessary things to make it work with our devise. To check back what changes hv been done by cowsgo to 1.11.25, its a lot of work & effort
Sent from my CSL-MI410 using xda premium
is 1.11.4 newer than 1.11.11 ?
1.11.11 by tj style, this 1.11.4 is frm isaac, there is no v1.11.11 frm isaac (moto triumph)
Sent from my CSL-MI410 using xda premium
incoming call volume seems to be ok.. but wifi gets disconnected often and carrier's name comes as 'unknown'... anyway thanks
zukriaksah said:
I think a way of porting done by cowsgo was tru cross-checking with tj style 1.11.11, so a lot of changes hv been done, for me i dont want to lose a sense of new rom, so i minimize the changes, just necessary things to make it work with our devise. To check back what changes hv been done by cowsgo to 1.11.25, its a lot of work & effort
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
Screen Blinking during calls still continues, Notification lights is good and so also Call Volume. Can see carrier name inside setting menu however Network search is still throwing up UNKNOWN.
Have you tried SD kernel with this ROM ?
Network stuff? yes i know, but i think i know the reason y its not appeared, actually it just read sim operator name, not network operator name, a few command line need to be included related to TelephonyManager to read the network operator name & phone number. Now i can see my phone number bcoz i added it manually during my CM7 era
Sent from my CSL-MI410 using xda premium
Try to dalvik & cache wipe b4 flashing. Sd kernel in my sd card but not yet try...
Sent from my CSL-MI410 using xda premium
zukriaksah said:
Try to dalvik & cache wipe b4 flashing. Sd kernel in my sd card but not yet try...
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
is there any other way to clear delvic catche apart from through Titanium Back up.
vivekb said:
is there any other way to clear delvic catche apart from through Titanium Back up.
Click to expand...
Click to collapse
I got the way which is through CMW recovery , want to update some experience with 1.11.4
Carrier Name is there (previously also don't have problem with it)
Incoming call problem is still there (need to toggle like what what I used to previously)
Flashing during call problem still continues like what is there in previous ROM.
Only difference I found is free RAM .... but not up to mark.... Although great work friend ....
I've flashed this rom a few times, just to trace any inconsistencies, if exist, with @ without wiping, but i never face any in call volume issue with this version
Sent from my CSL-MI410 using xda premium
zukriaksah said:
I've flashed this rom a few times, just to trace any inconsistencies, if exist, with @ without wiping, but i never face any in call volume issue with this version
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
Call Volume problem is not that much serious, main issue is proximity sensor issue ..... do you have any solution for that..... do you use any third party application to overcome this issue ..... or planning to do so.....
zukriaksah said:
Try to dalvik & cache wipe b4 flashing. Sd kernel in my sd card but not yet try...
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
I tried SDKernel, the performance and memory seems to have improved (btw where & how do I see free memory in MIUI ??? ON CM it was very simple)
The ROM is very stable, yet to see a FC (barring Torch, we can do away with this actually) or restart. Volume has been no issues at all. Noticed that WIFI tether is missing, installed external app from market but good to have in your next build.
I noticed that there is a delay in the start of ringtone during incoming call. Is it because of SetCPU since i have set it at 122 when screen off.
vijayar said:
I tried SDKernel, the performance and memory seems to have improved (btw where & how do I see free memory in MIUI ??? ON CM it was very simple)
The ROM is very stable, yet to see a FC (barring Torch, we can do away with this actually) or restart. Volume has been no issues at all. Noticed that WIFI tether is missing, installed external app from market but good to have in your next build.
I noticed that there is a delay in the start of ringtone during incoming call. Is it because of SetCPU since i have set it at 122 when screen off.
Click to expand...
Click to collapse
Dear Friend, even in MIUI it is very easy to check your free ROM, put your finger on home button, go to application manager, then go to running, you can check free ROM.
Also you can use this as task killer.
Although its very easy in CM7, CM has some of its own drawback over MIUI.
1. MUSIC
2. LAUNCHER
3. Bluetooth Filetransfer
these are very much better with Miui while CM7 is very average in these point, hence I prefer MIUI over CM7.
Maybe some one object me, but its my exp with CM7 and MIUI.
vivekb said:
Dear Friend, even in MIUI it is very easy to check your free ROM, put your finger on home button, go to application manager, then go to running, you can check free ROM.
Also you can use this as task killer.
Although its very easy in CM7, CM has some of its own drawback over MIUI.
1. MUSIC
2. LAUNCHER
3. Bluetooth Filetransfer
these are very much better with Miui while CM7 is very average in these point, hence I prefer MIUI over CM7.
Maybe some one object me, but its my exp with CM7 and MIUI.
Click to expand...
Click to collapse
Thanks for this short cut. I have used CM7 and yes both have its +s and -s.
With SDKernel free memory is only 97Mb ???? Anybody with any better experience ? UC V5 was better....But I am getting amazing battery life on this !
I've successfully ported the latest miui 1.12.16 to our device after a few try. Not yet ready to share, need to check the performance first.
Sent from my CSL-MI410 using xda premium
zukriaksah said:
I've successfully ported the latest miui 1.12.16 to our device after a few try. Not yet ready to share, need to check the performance first.
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
Thats realy good news our device is getting more and more roms
Thx
Sent from my CSL-MI410 using xda premium

Gingerdx auto-brightness

I am currently using gingerdx v22 and it runs great, only I have problem that the rom does not have automatic brightness. Can I make it to work auto brightness correctly by copying some libs from other roms, if yes then which libs should I copy and in which rom auto brightness is working perfectly?
mujeeb999 said:
I am currently using gingerdx v22 and it runs great, only I have problem that the rom does not have automatic brightness. Can I make it to work auto brightness correctly by copying some libs from other roms, if yes then which libs should I copy and in which rom auto brightness is working perfectly?
Click to expand...
Click to collapse
For me the best auto brithness have primeHD and frogy furnetal rom. If you want you must copy from system/lib/hw light.default.so and edit some lines in system/etc/hw.config
Has anyone managed to get a good functional auto brightness working on GingerDX by only adusting the settings in the menus? If so, what settings work well?
What about 'window length', 'sample interval' etc?
Thanks
Impster
Use GDX v 26....
The autobrightness works fine for me in it
sent from my phone using hands and brain...
harshitgroup said:
Use GDX v 26....
The autobrightness works fine for me in it
Click to expand...
Click to collapse
Good for you. However your comment doesn't really help though, does it?
impster said:
Good for you. However your comment doesn't really help though, does it?
Click to expand...
Click to collapse
I just suggested to use gdx v26 'cos the autobrigtness works fine in it..
So u see my post helped..
sent from my phone using hands and brain...
impster said:
Has anyone managed to get a good functional auto brightness working on GingerDX by only adusting the settings in the menus? If so, what settings work well?
What about 'window length', 'sample interval' etc?
Thanks
Impster
Click to expand...
Click to collapse
I dont get ur question...
Just click the option autobrightness in the display menu and it must work fine...
sent from my phone using hands and brain...
I am on GDX v026. In fact, on all versions of GDX i have used, auto brightness has never worked as it should.
If you look in Cyanogen brightness settings you'll find all sorts of autobrightness parameters that you can change and edit.
If you hop onto Gingercruzt you can see how well autobrightness should work.
You'll see then that GDX autobrightness does not work well at all - it is probably the only flaw in an otherwise fantastic rom.

[Q] HP touchpad Screen becomes unresponsive

I have been facing this problem for quite some time now, quite so often the touchpad screen becomes unresponsive ! ! sometime when i try to unlock the device the device wont unlock . The screen comes on but will not respond to any touch events !
(I am using cynagenmod 9)
To resolve this i always have to force reboot my device ! which is something i dont like a lot !
I read a few posts about this, so i re flashed the latest nightly and the problem was not resolved, i did a clean wipe factory reset as well lost all my data ! but it did not resolve this issue !
any insights into what causes this problem
Thank you.
Nargoles
Sent from my aokp_tenderloin using xda premium
amitvig22 said:
I have been facing this problem for quite some time now, quite so often the touchpad screen becomes unresponsive ! ! sometime when i try to unlock the device the device wont unlock . The screen comes on but will not respond to any touch events !
To resolve this i always have to force reboot my device ! which is something i dont like a lot !
I read a few posts about this, so i re flashed the latest nightly and the problem was not resolved, i did a clean wipe factory reset as well lost all my data ! but it did not resolve this issue !
any insights into what causes this problem
Thank you.
Click to expand...
Click to collapse
Do you have the problem in WebOS? If so, it's probably a hardware problem.
Also, for next time, you can back up Android with Nandroid and only apps/data with Titanium Backup or something similar. Then you won't lose all your data.
bananagranola said:
Do you have the problem in WebOS? If so, it's probably a hardware problem.
Also, for next time, you can back up Android with Nandroid and only apps/data with Titanium Backup or something similar. Then you won't lose all your data.
Click to expand...
Click to collapse
i am sorry for not providing complete information, i only have this issue in CM9 ! i have not faced this issue in webOS yet !
amitvig22 said:
i am sorry for not providing complete information, i only have this issue in CM9 ! i have not faced this issue in webOS yet !
Click to expand...
Click to collapse
Did you wipe /system as well as /data? Factory reset only wipes /data. Also, did you check the md5sum to make sure the download was right?
bananagranola said:
Did you wipe /system as well as /data? Factory reset only wipes /data. Also, did you check the md5sum to make sure the download was right?
Click to expand...
Click to collapse
I am doing wipe system right now ! i will let you know if i face the problem once again !
thank you
bananagranola said:
Did you wipe /system as well as /data? Factory reset only wipes /data. Also, did you check the md5sum to make sure the download was right?
Click to expand...
Click to collapse
I just did a wipe system, and the issue has not been resolved. I am certain that i dont face this issue in webOs i used only webOs for 5 days constantly and i did not face this problem ! but i face this problem in CM9.
I currently flashed the cm-9-20120909-NIGHTLY downloaded straight from cynagenmod website !
i used the touchpad for a min locked the screen and came back to check after a min and the screen became unresponsive and i could not unlock it !
amitvig22 said:
I just did a wipe system, and the issue has not been resolved. I am certain that i dont face this issue in webOs i used only webOs for 5 days constantly and i did not face this problem ! but i face this problem in CM9.
I currently flashed the cm-9-20120909-NIGHTLY downloaded straight from cynagenmod website !
i used the touchpad for a min locked the screen and came back to check after a min and the screen became unresponsive and i could not unlock it !
Click to expand...
Click to collapse
The md5sum check is to make sure that the file you downloaded is identical to the one posted on the CM10 website. Sometimes, downloads aren't perfect even if you got them from the right place. It makes sure that there are no errors in your ROM. It's probably fine, but it can't hurt to check.
Try upping you min CPU values... sounds like half way to the SOD.
Sent from my aokp_tenderloin using xda premium
-SGA- said:
Try upping you min CPU values... sounds like half way to the SOD.
Sent from my aokp_tenderloin using xda premium
Click to expand...
Click to collapse
how do i increase my minimum cpu ?? if you could tell me the right way i would be glad !
amitvig22 said:
how do i increase my minimum cpu ?? if you could tell me the right way i would be glad !
Click to expand...
Click to collapse
Settings -> Performance -> Processor.
bananagranola said:
Settings -> Performance -> Processor.
Click to expand...
Click to collapse
what should i set the cpu governor to ? performance or something else ?
Just try your min CPU value up from 384 to 486 to see if it helps at all...
Sent from my aokp_tenderloin using xda premium
-SGA- said:
Just try your min CPU value up from 384 to 486 to see if it helps at all...
Sent from my aokp_tenderloin using xda premium
Click to expand...
Click to collapse
i went into performance -> processor -> set min cpu !
but min and max cpu has been greyed out ! i can click on it but cannot edit it ! !
do i need an app to do this ?
amitvig22 said:
i went into performance -> processor -> set min cpu !
but min and max cpu has been greyed out ! i can click on it but cannot edit it ! !
do i need an app to do this ?
Click to expand...
Click to collapse
I'm using OaT's builds, for which CPU is greyed out and for which you need to install the setCPU app. I had thought that base CM9 allowed you to do it directly from the settings menu. My bad. Get setCPU from the Google Play Store.
bananagranola said:
I'm using OaT's builds, for which CPU is greyed out and for which you need to install the setCPU app. I had thought that base CM9 allowed you to do it directly from the settings menu. My bad. Get setCPU from the Google Play Store.
Click to expand...
Click to collapse
bought the app ! set the minimum to 432 ! will use the touchpad for a day and let you know if this fixed my problem ! thanx !
amitvig22 said:
i went into performance -> processor -> set min cpu !
but min and max cpu has been greyed out ! i can click on it but cannot edit it ! !
do i need an app to do this ?
Click to expand...
Click to collapse
I changed the min cpu to be a higher value, i did not face the problem all night , but its back again today evening
amitvig22 said:
I changed the min cpu to be a higher value, i did not face the problem all night , but its back again today evening
Click to expand...
Click to collapse
Well, if it decreased in frequency, I think that's a good sign. What's your IO scheduler and governor? Did you ever check on the md5sum?
bananagranola said:
Well, if it decreased in frequency, I think that's a good sign. What's your IO scheduler and governor? Did you ever check on the md5sum?
Click to expand...
Click to collapse
i installed the 09/09 nightly from TWRP and forced it to do a MD5 check, it passed.
Current governor is interactive ! min cpu is 432MHz , max cpu is 1.188GHz.
amitvig22 said:
i installed the 09/09 nightly from TWRP and forced it to do a MD5 check, it passed.
Current governor is interactive ! min cpu is 432MHz , max cpu is 1.188GHz.
Click to expand...
Click to collapse
Try changing governor to conservative. It forces CPU to stay at the minimum. It will be slow, but try it for awhile and see. Maybe you just need to lower your CPU max.

[Feature] Brightness Increaser

Hey Guys
Hey guys, Its just a simple Script to Increase the Maximum Brightness of your Device
Please test and report me back , arter97 kernel is working fine
here is the link just flash it Brightness Increaser
Works great thanks
After flashing, there's lag when scrolling
I'm on xtrestolite and after kernel
interestingkid said:
After flashing, there's lag when scrolling
I'm on xtrestolite and after kernel
Click to expand...
Click to collapse
Its just a script that change auto brightness values, and set others, do nothing with the rom try to wipe cache and dalvik
LuanTeles said:
Its just a script that change auto brightness values, and set others, do nothing with the rom try to wipe cache and dalvik
Click to expand...
Click to collapse
But why should it fix the problem with arter?
I mean.. that problem maybe is not releated to the level of brightness, but to the behavior of brightness sensor that doesn't work well.
I'm asking to ubderstand. I'd really like getting rid of this f***ing bug and finally use arter kernel.
erghetto said:
But why should it fix the problem with arter?
I mean.. that problem maybe is not releated to the level of brightness, but to the behavior of brightness sensor that doesn't work well.
I'm asking to ubderstand. I'd really like getting rid of this f***ing bug and finally use arter kernel.
Click to expand...
Click to collapse
Its kernel and rom related as Arter kernel uses DPDP sources it suffers that bug. New ROMs its fixed on both sides kernel and rom. But the custom kernels still uses old sources. Needs to wait new compilations
It works until you open a photo with gallery app
sieerra said:
It works until you open a photo with gallery app
Click to expand...
Click to collapse
I know that, i dont know what gallery causes to tbe system
Some times after a few minutes it goes back. But some only reboot solves
Working on stock kernel?

Categories

Resources