Hello
i am using sony eriscsson x8 and my pin blocked
i know my puk code but there is not a screen asking me the PUK code?
how can i write my PUk and recover my pin
p.s. i use gingerdx.v017
In the emergency dialer, type the following:
**05*<PUK Code>*<enter a new pin>*<confirm the new pin>#
you are great
it worked
thanks a lot
Thanks
Thanks a lot man, and I mean a hell lot......
hey man
hey there hat **05* doesn't work for me, when i enter all of that like **05*80063169*0000*0000#, this is what i typed in the emergency dialler and then it says.. "connection problem or invalid mmi code"
Well while entering puk code i don't get any tower (or should i? i don't know)
and swapping phones doesn't works as the sim is not detected by any other phone other than mine, please tell me how to overcome this problem
VA6307 said:
hey there hat **05* doesn't work for me, when i enter all of that like **05*80063169*0000*0000#, this is what i typed in the emergency dialler and then it says.. "connection problem or invalid mmi code"
Well while entering puk code i don't get any tower (or should i? i don't know)
and swapping phones doesn't works as the sim is not detected by any other phone other than mine, please tell me how to overcome this problem
Click to expand...
Click to collapse
mode airplane?
Related
hey guys
i just got my phone, and it was fine but had no service, so i flashed a compatible modem, and now i get enter unlock network control key
is there anyway to fix this or did i break it?
Can you operate the phone without the SIM ?? or without inputting the code ??
If so put this into the dialer *#7465625# and all options should be off.
let me know what it says. you can remove network locks pretty easy, theres an app in the market, and even a whole thread about it somewhere on here..
Enter Network Lock Key Galaxy I900T
I have a Samsung GT-I900T and is unlocked but is requesting me "Enter Network Lock Key".
I already enter again the unlock code and is incorrect. Any Help?
Thanks!
I have typed in the code *#7465625# and the network lock is on. Can this be changed?
Sorry, I think nobody know how to answer your question.
"Network Lock Control Key"
jasontran2010 said:
Sorry, I think nobody know how to answer your question.
"Network Lock Control Key"
Click to expand...
Click to collapse
Did you honestly just assume no one can help him because no one has helped him yet? Don't be ridiculous. That's absurd.
I am curious about if there is a solution to this ... i haven't run into this problem ... but imagine it might pop up.
Am planning to unlock my phone according to: http://forum.xda-developers.com/showpost.php?p=17148825&postcount=334
My phone GT-5660M (Galaxy Gio, Canada)
azzledazzle said:
Can you operate the phone without the SIM ?? or without inputting the code ??
If so put this into the dialer *#7465625# and all options should be off.
let me know what it says. you can remove network locks pretty easy, theres an app in the market, and even a whole thread about it somewhere on here..
Click to expand...
Click to collapse
I found a phone and flashed the firmware, and it says enter the network code also.
So i entered the dialer code you said and the lock code is on.
So what cind of app is there, ore other way to fix the problem
Hi guys. I have a problem a bit similar to the ones I read earlier but my problem is that I entered my PIN code and phone didn't recognize it. Now I should have an option to enter PUK code and everything would be fine, but I don't have that option. My screen says: "Take a look at the manual or contact with your service provider" (something like this, my phone language is Polish so I may translate something not correctly). I did take a look at the manual but there was nothing that could solve my problem so I'm asking you, members of xda community, is there any way to solve this problem without taking phone to my GSM provider?
If you are using custom rom try full wipe maybe it would hep
Sent from my X8 using XDA App
It didn't work, but it turn my phone language into english so I can write what it says:
"SIM card is PUK-locked."
"Please see the User Guide or contact Customer Care."
If you inputted a incorrect PIN for too many times the SIM card will lock up and require the PUK to reset the PIN failure counter - that much the phone is actually doing right.
If you don't have a possibility to enter the PUK then all you can do is to see a service point of your mobile operator to have the SIM card resetted.
There's pretty much nothing you can do as that's a security function of the GSM card and not the phone or the OS.
EDIT: Any chance entering **05*<PUK Code>*# or **05*<PUK Code>*<New PIN>*<New PIN confirm># works? (in case you can get to the dialer)
I can get to the dialer, but I didn't know that I can enter PUK there, I'll give it a try and write either it worked or not.
EDIT:
B.Jay said:
Any chance entering **05*<PUK Code>*# or **05*<PUK Code>*<New PIN>*<New PIN confirm># works? (in case you can get to the dialer)
Click to expand...
Click to collapse
The second method worked! Thanks! When I use this first method it says that is either connection problem or MMI code is invalid.
I didn't see a focus flash forum and it is very similar to the focus s internally so wanted to try posting here. I just got a focus flash from ebay as well as an unlock code and put my t-mobile sim in the phone. However, when I enter the code and tap enter, it says "sim error". I can cancel the unlock prompt and go to the metro ui, and there's a little sim icon with a lock on it. If I take out the sim card and restart, instead of the unlock prompt, I get a little box that says "sim error" and a message about missing or invalid sim. The little sim icon at the top has a little (/) instead of a lock. What could be the problem? It also says no network found in the cellular section of the settings.
same issue
i am having the exactly same issue with my focus flash, can any one help ?? and if the op user found out the solution please share
How many times have you tried to enter the unlock code? Id used to be (and probably still true) that trying more then five times will lock your phone permanently. You should get back to the person who provided the code and inform them of the issue. Double check your IMEI number when you contact them. One wrong digit in IMEI will generate a wrong code.
i have a P970 Locked to Kodoo Canada, i got the code from ebay but if insert the simcard don't ask for code, in the notification bar i can see network locked but not any way to entry the unlocking code. Also with the sim card inserted i have a error while search for mobile networks in settings
is any way to do this? Like *#.......
thanks
Try this: 3845#*970# if I remember correctly, there was a setting/option for this somewhere in there
SOLVED
thanks for the code
i found also on internet
hod #1 Insert a non accepted simcard, and enter code when prompted for a code
OR
Method #2 Go to the dial screen and press “2945#*model number#”
for example if its a p999 you enter “2945#*999#” or if its a p990 you enter “2945#*990#” etc…
OR
Method #3 to the dial screen and press 2945#*71001# as if making a call, enter code when prompted
OR
Method #4 Go to the dial screen and press *#865625# as if making a call, enter code when prompted
That's what I call a good post, thanks for listing it all up Maybe change the title to something like [Solved] P970 network unlock code... Just a suggestion, so everyone can see, that the solution is in here
I got the unlock codes but i found up to now no way to type it in. The hidden menu has no sim unlock code undermenu (i checked all). all other codes i checked give me no menu pop up (they just give me an error "MMI code not valid"). My phone is LGP970H from Mexico Telcel.
Hey guys, currently in Italy and tried to SIM unlock my phone using the instructions in BadBoyz Rom so I can use a Wind SIM, but my phone keeps asking for a pin then a puk code. Please help.
I think this is a code which was provided to you by your Service provider. If you enter puk code incorrectly 3-5 times your SIM will get blocked. Call your service provider and ask them what is the number or look for the original papers included with the SIM card and you will find the numbers.
Vcek said:
I think this is a code which was provided to you by your Service provider. If you enter puk code incorrectly 3-5 times your SIM will get blocked. Call your service provider and ask them what is the number or look for the original papers included with the SIM card and you will find the numbers.
Click to expand...
Click to collapse
I tried using the puk that came with it and then it just keeps asking for the puk still. The mobile shop said my phone was still locked. But i followed the guides and am soff