Here is V10k with 4g for the thrill ( dialer and contact works)
Version V10K1 http://www.multiupload.com/ZJ5YV5MV0S
Version V10K2 Link 1 http://www.multiupload.com/8IMO2UV9LD
LinK 2 http://www.megaupload.com/?d=K13L2KZE
* Solution for brightness control
* Theme MonoRework Thx to samno
* Iris (like iphone siri)
Thx to gtg465x let me to barrow the thriller rom
1) copy full thriller rom v1.1.0 file v10k ( either version 10K 1 or V10k 2) file to your SDcard
2)Install ROm Thriller V1.1.0 ( You must install this ROM and version (only 1.1.0 )
flow the ROM installing instruction
here for install Thriller V1.1.0 http://forum.xda-developers.com/showthread.php?t=1261704
3)then wait until you see thriller welcome screen
click "quite" instead of continue.
4) Turn off the phone With the phone powered off, hold the volume down button, the 3D button, and the power button until you see the LG logo and then release. This should boot you into CWM
5) do not Select "wipe data/factory reset".( You already done it when you installed the thriller ROM)
6)Select "install zip from sdcard" and navigate v10K.zip file and install.
7) When it finishes flashing, select "reboot system now". The first boot will take a few minutes.
8) After booted error msg will come about the keyboard change your keyboard android to LG to fix it.
YOu should have V10k O3D
Known bugs
1 brightness in display in settings, i get a force close.(V10k has alternate solution for brightness control)
2 Android keyboard not working ( has to install swype) or use lg keyboard
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ueshada said:
Here is V10k with 4g for the thrill ( dialer and contact works)
1) copy full thriller rom v1.1.0 file v10k file to your SDcard
Version 10K http://www.multiupload.com/HPAKDAW1MQ
2)Install ROm Thriller V1.1.0 ( You must install this ROM and version (only 1.1.0 )
flow the ROM installing instruction
here for install Thriller V1.1.0 http://forum.xda-developers.com/showthread.php?t=1261704
3)then wait until you see thriller welcome screen
click "quite" instead of continue.
4) Turn off the phone With the phone powered off, hold the volume down button, the 3D button, and the power button until you see the LG logo and then release. This should boot you into CWM
5) don not Select "wipe data/factory reset".( You already done it when you installed the thriller ROM)
6)Select "install zip from sdcard" and navigate v10K.zip file and install.
7) When it finishes flashing, select "reboot system now". The first boot will take a few minutes.
8) After booted error msg will come about the keyboard change your keyboard android to LG to fix it.
YOu should have V10k O3D
Click to expand...
Click to collapse
Does MMS work?
Sent from my LG-P925 using xda premium
looking forward to the rom, but...
V10 link doesn't work properly
Its working now yes mms works
Sent from my LG-P925 using XDA App
Curious-
Since it's not running GB or anything above froyo is there really any reason to flash it if we're already running Doomed Froyo or Thriller ROM?
how is this compared to the Thriller rom?
Faster? Slower?
Is it worth flashing from Thriller and having to reinstall everything?
Little slow but u have 3d game converter
Sent from my LG-P925 using XDA App
Great to have another option, it would be nice to have CM7 fixed tor the Thrill also. jussayin.
Sent from my LG-P925 using xda premium
a2r3f said:
Great to have another option, it would be nice to have CM7 fixed tor the Thrill also. jussayin.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Hit up the CM developers. I think the rumor is they're supposed to be working on it for our phone. but I could be wrong.
kiltedthrower said:
Hit up the CM developers. I think the rumor is they're supposed to be working on it for our phone. but I could be wrong.
Click to expand...
Click to collapse
i think they are working on the O3D version, which can be adapted to ours with the MMS and 4G fixes listed in another thread... havent seen any updates yet as to how the cooking is going... i am curious to see what the devs here can cook up from scratch with either GB or ICS
Post removed since OP addressed my initial questions. I have since gotten the method to work! Be sure to use the linked 10K firmware in the first post.
Ok i will post screen shots did you wait untill welcomscreen show up on thriller 1.1 not the boot animation.i will post a video how to do it wait
You wait about a hr im working ryt now
Sent from my LG-P925 using XDA App
Sent from my LG-P925 using XDA App
ueshada said:
Ok i will post screen shots did you wait untill welcomscreen show up on thriller 1.1 not the boot animation welcome screen i will post a video how to do it wait
You wait about a hr im working ryt now
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
I did wait for the welcome screen. I think I might have used a different install of the 10K though.
ueshada said:
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Well there's all the proof I needed! Well done. I'll try it again with your post of the 10K firmware, and if that falls through, I'll just wait for your video.
Thanks!
try instal clear thriller 1.1 go head do the set up and install v10k after that dont try to reset data when u go cwm to install v10k
Sent from my LG-P925 using XDA App
right now just waiting to come to life after first boot, but everything looks good so far
is booting as i type, yay
p.s. i hate the lg keyboard;(
and the at&t banner, i'm about to try mms, so far data is working surprisinly fast
ueshada said:
try instal clear thriller 1.1 go head do the set up and install v10k after that dont try to reset data when u go cwm to install v10k
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Success! I still am not entirely sure how this hybrid creature works, but I'm happy to have 4G working properly! Now just to remove and reinstall keyboards.
Thanks!
Do you guys alright or do i still need to post a video how to flash
ueshada said:
Do you guys alright or do i still need to post a video how to flash
Click to expand...
Click to collapse
we're good, i have mine working, but still hate the lg kb
just tried to theme the rom, and it bootloop, damn it
so reflashed and back in business
latinohot said:
we're good, i have mine working, but still hate the lg kb
just tried to theme the rom, and it bootloop, damn it
so reflashed and back in business
Click to expand...
Click to collapse
Use Titanium Backup to uninstall the broken keyboards then reinstall or restore a backup of Swype.
Related
Vibrant AOSPish FroYo 1.0
I based this off of eugene373's JPM port. So GPS is NOT WORKING. Everything else, however, IS working.
This is based off of Euegene's JPM_Update that was posted 10/21/2010 at 9PMEST... It has all the fixes except the new recovery one he just posted.
My goal since getting the Vibrant was to make it at least look as AOSP as possible and I can say it's pretty close.
Screen Shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom Features:
1. Deodexed
2. Bloatware removed
3. Themed to look AOSP
4. AOSP 2.2 Apps
5. Touchwiz Removed
6. AOSP Lock Screen
7. Mobile AP
8. Root / busybox
9. Stock Android Keyboard
Click to expand...
Click to collapse
Included Apps:
adbWireless (removeable)
Advanced Task Killer (removeable)
Swype
Stock Android Keyboard
Samsung Keypad
DeskClock
AllShare
Launcher2
Stock 2.2 Calendar
Stock 2.2 Mms
CM6 Calculator
Fascinate Live Wallpapers
Nexus 2.2 Music
GenieWidget
Rom Manager (removeable)
Titanium Backup (removeable)
HD YouTube
ThinkFree Office
CarHome
ChromeToPhone
Samsung Apps (Removeable)
Superuser
Task Manager
Google Talk
Google Maps
My Files
Click to expand...
Click to collapse
I mainly made this for me, but decided to post it up for everybody.
MAKE SURE YOU DISABLE VOODOO BEFORE FLASHING THIS
ALSO MAKE SURE THAT YOU FLASH A 2.1 KERNEL IF YOU GO BACK TO 2.1 FROM THIS ROM
I take no responsibility for you flashing this, blahblah....
If you have issues with the market, try rebooting. I never had any market issues myself.
Fresh 1.0 Install - Flash Via Clockwork Recovery / ROM Manager
Download
Click to expand...
Click to collapse
Froyo_recovery Update Download > Froyo_recovery.zip
Features a Fully working recovery and adb + root in stock recovery.. Can wipe data from stock recovery or Clockworkmod Recovery. Enjoy!
Click to expand...
Click to collapse
To Do:
Reboot in Power Menu
Notification Pulldown Theme
More AOSP Theming
Avatar inclusion ?
Sims 3 inclusion ?
Credits:
eugene373
cgrunner
junkdruggler
mopodo
Project1.exe
Koush
s0niqu3
cyanogen
And everyone else
Click to expand...
Click to collapse
Yeeeeesssss!!!! Link link link link!!!
Sent from my GT-I9000 using XDA App
question
Do I install with rom manager?
How's the battery life on this bad boy ?
I'm using it for the first time so I don't know about the battery life aha. And yes, ROM Manager. And the link is in the OP...
Thanks!
it worked for me yeah!!!!!!!!!!!! using rom manager
djeddieone said:
gonna give it try with rom manager now. i tried installing eugenes rom but it was giving me a red font error message hopefully yours works for me.
Click to expand...
Click to collapse
Make sure you install it thru clockwork and dont just name it update.zip
Dmoliton
dumb question but doesnt rom manager take you to clockwork?
if not how do i get to clockwork?
You out did yourself ander.... Awesome so much quicker too, just one thing theres no haptic feedback on the home button.
Sent from my GT-I9000 using XDA App
just flashed it with rom manager using clock work yes it worked thanks man gonna post up my feedback asap!
Haptic on Home button is a JPM issue. Will see what happens when they make a new kernel. I just do the front side of things lol.
Anderdroid said:
Haptic on Home button is a JPM issue. Will see what happens when they make a new kernel. I just do the front side of things lol.
Click to expand...
Click to collapse
No biggie bro still awesome
Sent from my GT-I9000 using XDA App
djeddieone said:
for the people that installed it and working fine can you please post how you did it thanks.
Click to expand...
Click to collapse
Install rom manager open it and install the clockwork update make sure theres no update.zip files on your internal sd card then download the rom using anybrowser just not the stock browser for some reason it won't download then put the file on the root of the internal sd then reboot using rom manager (the second option under clockwork) then reinstall packages then it should boot to clockwork, then choose install file from sdcard then choose from sdcard then every thing else is self explanatory lol
Sent from my GT-I9000 using XDA App
So i imagine this has the potential to wipe the SD card like the eugene's build, right? What exactly was the way to avoid that? Just put it on an external sd card?
kraftey said:
So i imagine this has the potential to wipe the SD card like the eugene's build, right? What exactly was the way to avoid that? Just put it on an external sd card?
Click to expand...
Click to collapse
I don't think it wipes if you already have eugene froyo installed cuz it didn't to me and I was able to do a titanium back up but I think wipes if you running stock not sure
Sent from my GT-I9000 using XDA App
Anderdroid said:
ALSO MAKE SURE THAT YOU FLASH A 2.1 KERNEL IF YOU GO BACK TO 2.1 FROM THIS ROM
Click to expand...
Click to collapse
Could u pls explain that? So I just can't go back to 2.1 by simply flashing a 2.1 rom? How can I flash a 2.1 Kernel?
thanks
Both Bionix's ROMs and my Vibrant AOSPish 2.1 ROM will flash a kernel for you. Other then that use the search function.
This has not wiped my SD card. Although I backed everything up.
This is fantastic and is the first froyo I'm considering keeping on my phone. Remember to zipalign! (including framework-res.apk and twframework-res.apk).
Is gps working on here snd auto rotate.
Nvm got it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
-----------------------
Prerooted incl. ADB root
Deodex
UA String
AdFree Hosts (No More Ads)
Themed
Installation ( More detailed on http://stefan-developer.us/2011/08/broodcomb-gt-p7500-xwkg9-3gromcwm/ )
-----------------------
(If coming from XWKG9 STOCK, Skip to step 5.1)
1. Download Stock Rom P7500-XWKG9 EUR 3G Only http://www.multiupload.com/SGV6N78YY7 [password: samfirmware.com] (Source http://www.samfirmware.com/)
2. Download ODIN3 V1.85 http://forum.xda-developers.com/attachment.php?attachmentid=581913&d=1304094576
3. Extract stock rom somewhere on your computer also Odin, run Odin and don't touch anything except PDA where you will select previously extracted stock file.
4. Put Tab in Download mode, connect tab to computer, power off, hold power off and volume - till you see two icons then press volume + and if it ask are you sure pres volume + one more time and you are in download mode then ( order of buttons is _power_ _volume -_ _volume+_ )
5. You should see yellow background on first box of odin and that is good your Tab is ready to flash, then click start on ODIN and wait till it reboot.
5.1 Boot in recovery ( Because stock doesn't have if you was following from step one do the root your Tab, as it is on this topic, so download this and put it on the sdcard, then put your Tab to Recovery mode power off, hold power off and volume - till you see two icons then press volume - ,then volume + and you should go to apply update zip file and you will select this file and when it is done you should reboot your device. )
6. Make a nandroid backup
7. Wipe data/factory reset
8. Flash BroodComb Alpha
9.Reboot and enjoy
Boot will take a while coz cache is cleared also factory mode is reseted so don't worry everything is fine.
--------------------------------
Screens
some screenshots would be nice!
Back in a flash ! =)
Nice stuff and a screenie idd would be nice
Sent from my GT-P7500 using Tapatalk
Seems to be fine men, much appreciate <3
Sent from my GT-P7500 using Tapatalk
Very nice work man. Keep on improving it, i'll be happy to test.
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Will make some screens when i get home sorry i was in hurry, regarding OC i think we will not see that coze source code for our kernel is not yet released...pity :/
Sent from my R800i using XDA Premium App
Never mind... sorted it out
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
will try this after download finish
tedbears said:
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
Click to expand...
Click to collapse
Cwm you should use Recovery mode = CWM , Download mode = Odin, np you are free to ask..we don't want to brick your tab...
Sent from my R800i using XDA Premium App
ca110475 said:
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Click to expand...
Click to collapse
Please could someone return a answer to his/her question?
Thank you very much.
Fianlly, first custom 3G rom. Thank you for this mate. Is it possible to have pure HC rom without crapwiz?
Thx
Sent from Galaxy Tab 10.1
mr_at_sgs said:
Please could someone return a answer to his/her question?
Thank you very much.
Click to expand...
Click to collapse
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
secretfile said:
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
Click to expand...
Click to collapse
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
I wonder from where on earth he got the source code, i doubt he disassembled it , but i am ready to try it out it simply can't harm also overcloock would be nice
wojmzy said:
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
Click to expand...
Click to collapse
Sure you can i was on it first time then flash it over with ODIN... so it is safe...
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
Hmm i tryed that kernel but somehow on my device 3g [GT-7500 not 10.1V] was not working.. maybe my tab is isolated problem?? can someone verify that his kernel is working?
Can you please post that sick wallpaper? And any others that you may have included? Haven't decided if I want to switch ROMs just yet and couldn't find the wallpapers in the zip...
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you have been around for a while, you are familiar with the "M" series.
If not, then welcome to "M"!
This revision of "M", M12, is a giant leap from where M11 ended.
A special thanks goes out to Vipitus, without which this rom would not have been possible.
M12 Stats:
Based off of Private Stock, M9 and M11
KB5 Base, Kernel and Modem
Accurate 100/100 battery
Built to compliment the QQ/Miui Launcher.
Freaking awesome UI
Droid Charge system sound scheme and start up animation
Built and rebuilt everything
Moshiach Tweaks
Beats Audio
Nine Lock Screens
Clock Options
All Vibrant features function as they are intended.
Theme Engine - comes with 6 themes pre installed - I will provide more as requested.
Install and Set Up:
Odin to JFD first if coming from GB or ICS
Flash M12.zip
Reboot.
At first start up, choose Miui as your default launcher.
Give it a chance to settle in.
Set up your Google account.
Connect to the Google Play Store to receive any updates.
Boot to recovery and flash themes_signed.zip.
Reboot and rejoice!
Disable Voodoo before flashing.
Download both if you want the themes installed with this.
Download Rom - Amend CWM Script - 178.77MB - http://www.mediafire.com/?88iq6uz6nqwrlir
Download Theme Pack - Edify CWM Script - 43MB - http://www.mediafire.com/?u34flms6i9mge65
Screenshots:
Reserved for Q&A, tips etc.
If you are not living in Asia, you will want to remove the weather widget from the home screen as it will only deliver weather from Asia.
If you scroll left one screen from the home screen you will see 2 folders with Chinese names, just rename these as you would on an iPhone.
Reserved for Themes and Tweaks
Do a search for "QQ Launcher Theme", if you find a theme you want, link me to it and I will port it to work with this build.
I will be posting a theme template for those who want to contribute their own themes for this.
And the awesomeness begins... very nice!!!
Man, your gonna may me lazy.
Is this 2.2 or 2.2.1? Also, is there any bugs associated with the MIUI launcher?
edit: looking at the build.prop this is 2.2, for those that want to know
Thanks Jellette, you always made my favorite ROMS. I was so bummed when you left. I appreciate your work a lot! B-)
Does this rom have T-Mobile WiFi calling?
ascallop said:
Does this rom have T-Mobile WiFi calling?
Click to expand...
Click to collapse
Yes it does.
jellette said:
Yes it does.
Click to expand...
Click to collapse
Thanks! Can't wait to try it
Love M series the first time around. Kept it for a long time. Getting hard to settle with all the work you are bringing back, thanks.
Quick question.
Since I am on a froyo the sequence I would follow would be
wipe
Flash rom
All your other steps
then flash the themes zip in CWM
reboot
Is that it?
I see below the instructions the two files and the theme pack is listed as an edify script do I also need to run that script with a script manager?
Wow, Looks Awesome Can't wait to give this a try!
Nice!!! Welcome back Heathen!!!
Woofdah said:
Love M series the first time around. Kept it for a long time. Getting hard to settle with all the work you are bringing back, thanks.
Quick question.
Since I am on a froyo the sequence I would follow would be
wipe
Flash rom
All your other steps
then flash the themes zip in CWM
reboot
Is that it?
I see below the instructions the two files and the theme pack is listed as an edify script do I also need to run that script with a script manager?
Click to expand...
Click to collapse
Disable Voodoo if you are running it. Both zips should flash from clockwork no problem.
Listen to him about voodoo if you flash with it activated it will brick did it this week and recovered.but barely. ...anyways this Rom is excellent jelette thanks for returning. .. I flash all the time but this one is smooth enough i might just stay here for a while...love the theming and wallpaper. ..thanks man
Sent from my SGH-T959 using xda premium
Nice to see it back. Always loved M9.
beats?
so how does "beats audio compare to voodoo sound? and how do i enable it.. whats beats audio all about? i know very little about it.. awesome rom, keep up the good work, left ics for this masterpiece
Install it this morning and running great. I turn it off and connected to a wall changer. Now it shows its charging warelessly. Where did this come from?
Sent from my LG-P999 using Tapatalk 2 Beta-4
pbcal said:
Install it this morning and running great. I turn it off and connected to a wall changer. Now it shows its charging warelessly. Where did this come from?
Sent from my LG-P999 using Tapatalk 2 Beta-4
Click to expand...
Click to collapse
It's an element of the Droid Charge. For fun.
Thank you, how did you know I went back to froyo? Haha
Two questions, if I remember right, deleting the voodoo folder from the root of your sd card and rebooting will disable it right?
Lastly, does it supports FFC?
Sent from my SGH-T959 using Tapatalk 2 Beta-2
iwillkillyou said:
Thank you, how did you know I went back to froyo? Haha
Two questions, if I remember right, deleting the voodoo folder from the root of your sd card and rebooting will disable it right?
Lastly, does it supports FFC?
Sent from my SGH-T959 using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
You can disable Voodoo from within Recovery w/voodoo kernel or put a blank file named "disable-lagfix" in the folder
Sent from my SGH-T959 using XDA
Hello Everyone!
Two days ago I rooted and flashed miui on a friends Ace, played around with the ROM, and I realized that this was the one Ive been looking for for ages while in this community. I had tried porting from Motorola Defy but couldn't, then I bought Nexus and... Anyways, I just decided to make a quick port of it, and here it is! Enjoy!
It is a port from this(http://forum.xda-developers.com/showthread.php?t=1908444) ROM.
Some of the special/cool features that no other MIUI Gingerbread rom for gt540 has:
Top-coming dialogs/notifications(see screenshots)
MIUI Control Panel-some cool features(see screenshots)
FULLY themable
MIUI Backup
Switches instead of checkboxes(Not like "touch to change", they are real switches(sliding) )
MIUI Browser
Orange themed ICS keyboard
based onSDSL 3.0 build 1
ROM
based on AOSP 1.4 build 1
ROM
NOTES
You have to create a folder called "theme" under /data/theme to get the themes working
if you have adb just type this it will be easier:
Code:
adb shell
Code:
su
Code:
mkdir /data/system/theme
Launcher icons look too small. To fix apply the default theme.
Sadly, i couldn't figure out how to fix the minimum brightness on gingerbread.. So try to take care of it.. Im really sorry! TIP: you can use ddms if you accidentally turn the brightness to fully dim, to see whats happening..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Enjoy!!
HOW TO FLASH - for those without an sdcard
These builds are small(~105mb) so will fit to data partition..
1. Get TWRP if you haven't already, and flash it.
2. Boot into recovery.
3. Make a nandroid backup of data at this point in case you are coming from an old build.
4. Make a data wipe(for enough free space for the rom.zip file).
5. Assuming you already have all the drivers installed on your PC connect your phone
6. Copy the rom.zip file to the same directory with adb.
7. Open up Command Prompt; Click Win + R; type "cmd"; Press Enter;
8. Navigate to the folder of adb and the rom.zip: Type:
Code:
cd /
cd FolderOfAdb
adb push romfilename.zip /sdcard/lost+found
9. Switch to TWRP and moutn data.. Mount > Mount data
10. Again on TWRP go find the rom.zip file. Install > "..." > /data > lost+found. There you should see the rom file name click on it and wait. DON'T flash yet!
11. After a while you'll get some info about transaction in cmd window indicating that the file was pushed successfully, or an error. Let's assume we transfered successfully..
12. Go to TWRP and click Flash.
13. When flashing is complete go and wipe data again.
14. If you want to restore your previously made backup do it now.
15. Reboot it should be booting now.
Good work.
Can you make Build Three version(from tejasdj12's ROM)?
SDSL isn't work well with some gt540's and it's good to have a choice. Thanks a lot!!!
Gr8 Xiprox....was waiting for this sort of rom ....fast as sdsl?
Sent from my GT540 using xda premium
s-u-f-f-e-r said:
Good work.
Can you make Build Three version(from tejasdj12's ROM)?
SDSL isn't work well with some gt540's and it's good to have a choice. Thanks a lot!!!
Click to expand...
Click to collapse
Ill see tomorrow,I need to study now.. (soon.. sooooon..)
subham964 said:
Gr8 Xiprox....was waiting for this sort of rom ....fast as sdsl?
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
I really dunno. My bro has the phone.. I just took it from him and ported the rom.. so...
s-u-f-f-e-r said:
Good work.
Can you make Build Three version(from tejasdj12's ROM)?
SDSL isn't work well with some gt540's and it's good to have a choice. Thanks a lot!!!
Click to expand...
Click to collapse
see, this indicates that Im going old.. I used to port roms on Build Three but this time I forgot its existence... How come? lol
It's because kernel .32 is somehow in the middle and nobody work's on it
Waited for over 40 mins...no links yet...
Sent from my GT540 using xda premium
subham964 said:
Waited for over 40 mins...no links yet...
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
Oh, come on!! Literally, you know.. Anyways, links up.
Thanks a bunch buddy...
Sent from my GT540 using xda premium
Min sys patrition?
nope00 said:
Min sys patrition?
Click to expand...
Click to collapse
not sure, but 150 should go..
Yeah I tried system is 149 MB so i used 160 for safe, but root dont work form me, keep testing. Good Work Thx.
Okey, i really really like this ROM: it runs pretty fast, its the fastest MIUI i ever tried on my GT540 but !!please!! ad German to locale, that would be very great!
nice rom bro. but root doesnt work :|
TMinh said:
nice rom bro. but root doesnt work :|
Click to expand...
Click to collapse
yeah, Im aware of that.. (realized later on) Will do my best..
awesome rom but without root is not usable for me! Can u do a fix for that?!
Thanks
Hey xiprox buddy ...root fix plz....!!
Sent from my GT540 using xda premium
Try to install SuperUser on Market, i have installed it and get root permission back.
Sorry for my bad English.
Well, install SuperUser from play store and open SuperSU, it will install binary file. When complete u can remove SuperUser and use only SuperSU. Root will work now, but some app say that no busybox is installed, so they cant work. Use Busybox Installer from play store and it say there is already busybox in the system, but when install another busybox, an error say that Busybox cant be installed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For
Motorola Atrix
ROM INFO
Latest MIUI Version: 3.2.1
AOKP Version: Milestone 1 FINAL
NOTE!!! THIS VERSION DOES NOT HAVE THE MIUI TOOLBOX
Click to expand...
Click to collapse
How To Flash
Place ROM onto phone storage
Reboot to recovery
Make a Nandroid
Install Rom: Wipe INSIDE ROM
When you select "Reboot Not", you'll get a CWM error, IGNORE IT
Install OPTIONS or Gapps
WIKI/FAQ Located: To be reworked
Click to expand...
Click to collapse
Bugs??:
KNOWN ISSUES:
Videocamera : Use VideoCam Illusion
Slight Lag possible on screen transitions
USB tether
The graphics related issues are due to not having proper drivers to use for this. Don't ask for an ETA on a fix. Moto won't be giving us the drivers, so there is no fix
If you need to report a NEW bug, report it once, and the next TWO people VERIFY it. I don't need everyone reporting same bug 20 times. I you can, provide me the following information:
Version you're using
What type of fwipe you did and what ROM you came from
Have you restored any data from something like Titanium Backup
What app is misbehaving and what you were doing when it started
Logcats<--THIS IS PREFERRED.
If you don't know how to logcat, go HERE and learn. This really nice guy took the time to write out a good how to
When you have a LOGCAT and would like to post it, please go to pastebin and post it in there, then LINK that location in this thread...I don't want to see them posted directly in here.
Click to expand...
Click to collapse
Downloads:
Rom file is located HERE
Options Chooser is Located HERE
My latest CWM: V1 as well as Aroma-Prep
can be downloaded HERE
Click to expand...
Click to collapse
Credits:
MIUIAndroid-For this most Excellent Rom
scott.hart.bi=for helping me with source building
Jokersax11-for being my initial inspiration on Photon, being a cool guy, and helping me along in my early days
Amarullz=for creating the Aroma Installer
Spleef-for collaborating on those first builds that got me into Android and initial MIUI Ports
Stevendeb25-for his help with my first ports in Atrix
Alcapone263-for donating an Atrix coming to a home near me
Proxisuser-For the Guide we initially used on these builds
All my testers and users (especially ATRIXXIRTA, LoanerDave, and Unforgivenmercy)
Anyone else I may have forgotten
Click to expand...
Click to collapse
Kernel Source: HERE
Click to expand...
Click to collapse
See Post 2 for More Info
Mine
Mine 2
its b/c of your work, that i decided to resurrect my atrix, replacement screen showed up today, dismantling tomorrow but currently running your miui
Bill I ran this as described, everything boots and works fine, but it wont load the launcher, it just says miuihome isnt responding and it loops "loading" I'll wipe my cashe and report back.
jeffreygtab said:
Bill I ran this as described, everything boots and works fine, but it wont load the launcher, it just says miuihome isnt responding and it loops "loading" I'll wipe my cashe and report back.
Click to expand...
Click to collapse
Check the new build. It's up now
I had forgotten one of the bin files that is needed to get the MIUI shell to run, which in turn lets the Home app properly load
hi th3bill, thanks for the new build, will try it after reach home and feed back to u
@bill did u find any luck with porting the kernel from lg optimus 2x
Sent from my MB860 using xda premium
Let me answer that for you. No.
Language
Hi Th3Bill,thanks for your great works :good:
That Rom have multi-lang?
As soon as the call ends i loose my network signal after 15 seconds it comes back
Sent from my MB860 using xda premium
Hey Bill i'm getting random reboots after about 30 seconds on this, after full wipe tweaked, emmc.
I Got the log right after the reboot starts, lot of errors in the beginning. Trying a reflash. Same thing.
http://pastebin.com/x0CUzrvC
this might be better i think i caught it quicker, i cant seem to get a long enough log for all of it.
http://pastebin.com/m7vtA8fL
Just upgraded to 2.12.4, and it's the same issue as 2.12.7 originally: no sound through either the speaker, headphones or handset speaker. No Logcat because I'm not sure how to record a Logcat for the sound not working (as there's no specific fail point or error message).
i am a international atrix user
i got bootloop after flashing this rom and your Liquid Smooth rom too
my recovery is cwm touch
also, i have tried to use twrp 2.3.1 to flash it
but it doesn't work
what should i do?
ROM is Rebooting unpredictably.
andrea_marcello said:
Hi Th3Bill,thanks for your great works :good:
That Rom have multi-lang?
Click to expand...
Click to collapse
no multi unfortunately
mindstorms54 said:
i am a international atrix user
i got bootloop after flashing this rom and your Liquid Smooth rom too
my recovery is cwm touch
also, i have tried to use twrp 2.3.1 to flash it
but it doesn't work
what should i do?
Click to expand...
Click to collapse
What wipe did u do? Are you coming from a diff ROM?
Sent from my LG Optimus G
bottedumal said:
no multi unfortunately
Click to expand...
Click to collapse
Actually there are language packs at miuiandroid.com
Sent from my LG Optimus G
Th3Bill said:
What wipe did u do? Are you coming from a diff ROM?
Sent from my LG Optimus G
Click to expand...
Click to collapse
i made a full wipe and reformat /system and /data
Found my answer thanks fellows.