Related
I'v been installed clockworkmod from rom manager, but when i select the recovery reboot option, it does not reboot, HELP!
Did you root your phone already and install superuser? And also install busybox.
If the reboot recovery is the problem, then just install AnReboot then select Recovery
Sent from derp-mobile
Just tried it, but it does not reboot
ROOTED? SUPERUSER INSTALLED? BUSYBOX INSTALLED? then install CWM again and try to reboot again.
access to recovery via turning on phone
hi guys,
I have a little problem with my optimus black:
I have the rooted v20o and rommanager+cwm recovery (touch)
I can access into recovery by selecting rommanager on the phone and using "reboot into recovery" option. This is working, no probs.
But
when I'm turning off the phone and turning on, I cannot reach the recovery by repeatedly pushing hw buttons when the lg logo appears
I have tried all buttons, conbine them, but nothing works.
Is there an option in rommanager I forgot to check or...do you have any idea?
Thanks in advance!
airsheep said:
hi guys,
I have a little problem with my optimus black:
I have the rooted v20o and rommanager+cwm recovery (touch)
I can access into recovery by selecting rommanager on the phone and using "reboot into recovery" option. This is working, no probs.
But
when I'm turning off the phone and turning on, I cannot reach the recovery by repeatedly pushing hw buttons when the lg logo appears
I have tried all buttons, conbine them, but nothing works.
Is there an option in rommanager I forgot to check or...do you have any idea?
Thanks in advance!
Click to expand...
Click to collapse
For accessing recovery by hw buttons you need to have eRecovery or gRecovery..
Looks like you are using stock rom which does not allow to reboot to recovery using hw buttons.
Try the other custom roms like zeus or flash e recovery from the thread in development section..:thumbup:
Erecovery link http://forum.xda-developers.com/showthread.php?p=18589599
Sent from my LG-P970 using XDA
Hi,
I have installed the v20n recovery from the link but does not work... it only replaced the touch version for a normal.
Other idea?
Tnx, anyway...
airsheep said:
Hi,
I have installed the v20n recovery from the link but does not work... it only replaced the touch version for a normal.
Other idea?
Tnx, anyway...
Click to expand...
Click to collapse
What link are you talking about here...?? The link I posted is for a zip file download. You will have to flash that zip with your current cwm by selecting the option of "install zip from sdcard".
The zip you downloaded will not install cwm but will modify your pvrsrvinit file so that it will allow booting to recovery when you repeatedly press g button when the leds are flashing... I hope you get what I am trying to say...
http://dl.dropbox.com/u/4629711/zeus/huexxx-eRecovery-V20N.zip
Now flash this zip through cwm recovery mode. Its for V20N but most probably will work for your base too. If it does not then pm heuxxx.
Sent from my LG-P970 using XDA
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
digitz_ said:
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
Click to expand...
Click to collapse
connect your phone to the computer
go into donwload mode
start odin
flash http://www.hotfile.com/dl/176669754/95e7a92/S6500DXXLD3_S6500DPROLD1_PRO.zip.html
RoSinner said:
connect your phone to the computer
go into donwload mode
start odin
flash
Click to expand...
Click to collapse
Nope, still same thing.
digitz_ said:
Nope, still same thing.
Click to expand...
Click to collapse
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
RoSinner said:
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
Click to expand...
Click to collapse
What can I do wrong? I putted MD5 in PDA and flashed.
I tried to flash CWM and diffirent firmwares but no luck.
digitz_ said:
What can I do wrong? I putted MD5 in PDA and flashed.
Click to expand...
Click to collapse
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I was flashing before like this, everything was fine. There must be a way to fix this.
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
nah we can flash one package with pda
How did you fix it?
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Here: http://forum.xda-developers.com/showthread.php?t=1853159
bro .. use odin
first switch to download mode then connect ur mob with pc , then use odin and update it with original pda ..
digitz_ said:
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
How did you do it, I cannot install adb drivers for some reason, I went back from CM10.1 to stock but now it just keeps repeating boot animation. Please help.
tom1890 said:
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Click to expand...
Click to collapse
Hi, I had exactly the same problem, flashed the stock firmwire but it gets stuck on samsung logo, flashed few CWMs but nothing. I really didn't know what to do, then my battery became critical so i connected it to the pc and let it charge. While charging, I tried to acces the CWM recovery (home+volume up+volume down + power) and BAM! It opened recovery, I deleted all user data, cache and factory reset, rebooted and it worked.
Try to flash stock rom
Flashing stock rom didn't work.
Sent from my GT-S6500D using Tapatalk 2
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
how did you fix this? i have exactly the same issue.
polys643 said:
how did you fix this? i have exactly the same issue.
Click to expand...
Click to collapse
Hi All,
I was struggle with bootloop issue for 3 days. I got my problem when I forgot to wipe phone returning ROM 10.2 to stock rom. Before I didn’t have any problems with getting to recovery mode but after I was not able to get to CWM. Also did try (vol+) (vol-) (home) hold while odin reset all I get RUMDAMP ARM9. Same when trying to hold recovery combination while normal boot. I have no problems with getting to Download mode.
Phone show Samsung animation and then vibrate once, pause, vibrate twice.
What work for me.
Recovery Combination = (vol+) + (vol-) + (home) + (pwr)
1. With odin 3.04 (don know if version matters I hade SS_DL.dll in same folder as odin) I install cwm-6.0.3.3-b2-jena.tar.md5
2. It restarted and get boot loop again
3. When I hold recovery combination phone didn’t boot. But what did I remove battery plug it again. Press (pwr) and immediately (maybe 0.5 sec) I hold rest of the recovery combination. Phone boot and show me logo so I release the buttons. To my surprise I did boot to CWM. (don’t know way but I didn’t do wipe immediately but I restart did try it again to be sure if this works – and it did, at least for me)
Rest was easy (WIPE Factory Reset, Cache, Dalvik Cache and just in case fix permission) restart and did boot to Stock ROM. For some unknown reason now I can normally CWM just buy holding combination and releasing as soon as Samsung logo show up.
I hope this will help somebody.
Now im using CM 10.1 07/07
My phone is S6500D no NFC
Cheers,
Maciej
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
pleeees tell me how u fix it my phone hase the same proplem u had can u
Hello everyone,
I have a Galaxy Pop (Mini - S5570) with android version 2.3.6.
I have tried installing CWM 5.0.2.6, but all that happens is that my screen becomes illegible or in certain cases, I have booted into recovery after installing, and all it shows me is "android" and that it, it gets stuck there, and in each case, I have to install the stock firmware again.
I am hoping to install CWM to use Cyanogenmod on my device.
Please help!
asrivastava said:
Hello everyone,
I have a Galaxy Pop (Mini - S5570) with android version 2.3.6.
I have tried installing CWM 5.0.2.6, but all that happens is that my screen becomes illegible or in certain cases, I have booted into recovery after installing, and all it shows me is "android" and that it, it gets stuck there, and in each case, I have to install the stock firmware again.
I am hoping to install CWM to use Cyanogenmod on my device.
Please help!
Click to expand...
Click to collapse
you must install clockworkmod via odin if it's the first time. I think you flashed cwm via stock recovery, this causing soft-brick....
XDRdaniel said:
you must install clockworkmod via odin if it's the first time. I think you flashed cwm via stock recovery, this causing soft-brick....
Click to expand...
Click to collapse
EEK... wrong. I flashed CWM via Stock Recovery and it's still running.
F4uzan said:
EEK... wrong. I flashed CWM via Stock Recovery and it's still running.
Click to expand...
Click to collapse
wow .... really? sorry...but when i first installed cwm was via odin.... i guess it was other times...
at the time it was the only way...
XDRdaniel said:
wow .... really? sorry...but when i first installed cwm was via odin.... i guess it was other times...
at the time it was the only way...
Click to expand...
Click to collapse
that's right, CWM can only be installed via Stock Recovery and instead with ODIN ! Odin can only be used for flashing stock rom and Bootloader
Well, tbh, I just did what he said and flashed it on with Odin and it has worked normally since then.
Flashed a lower vresion of CWM with Odin first then through the recovery, upgraded it to the latest one.
Worked fine for me.
yes your suggestion reaaly work , been trying update cwm 4 to 5 through odin always get an error..
End of support. Thread closed.
If you get stuck in recovery and can't boot into Android, you need to install the stock recovery to get Android to boot.
Stock recovery flashable zip located HERE.
------------------------------------------------------------------------------------------------------
READ THIS POST BEFORE INSTALLING ANY CUSTOM RECOVERY
CWM Recovery 6.0.4.8
(TWRP is in post 3, Philz Touch in post 4)
Click HERE for the latest version.
Please report any bugs here in this thread.
Thank you to everyone who has (and still will) help in testing!!!!
Credits go to:
@Unjustified Dev for device and kernel source trees
and of course Koush and the CyanogenMod team
Watch THIS VIDEO tutorial for a step by step visual guide for performing the instructions listed below (thanks @Tomsgt for the video).
Instructions:
1. Download ODIN on your computer.
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them). Also need to enable USB debugging.
7. Select "PDA" (or AP) then choose the recovery file you want to flash. (Unzip the file you downloaded so that you have a file named "recovery.tar.md5".)
8. Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
9. Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).
Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if CWM doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 9).
After you get the custom recovery working, you can flash the latest SuperSu zip to get root.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Watch this video to learn about the navigation issues and Rainbow Mode: http://youtu.be/iCNdxlNzdBI
If the highlight doesn't move on the recovery menu, the selection actually does change. Go ahead and hit Power to select. If the menu goes blank, just hit Volume Up or Down to get it to reappear.
It appears that the menu navigation issue only happens when you use the button combination to boot into recovery. If you use the Quick Boot app or "adb reboot recovery", it seems to work properly. Only use the 3-button method to boot into recovery.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Flash at own risk!!!!
+++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++
Click HERE for the latest version.
Stock recovery flashable zip located HERE.
Nice!
Sent from the can using two ply
TWRP is reported to be causing problems for now. Please use CWM or Philz Touch (post 4) for now.
TWRP 2.7.0.1 (unofficial)
Click HERE to download the latest version.
I do not have a T110, so this recovery has not been tested by me. Please report if it works for you.
Same install instructions as above.
After installation, you may experience slow behavior in recovery if you use the button combination to boot into recovery. Using Quick Boot from the play store or any other software method to boot into recovery will solve this problem.
Internal card gets mounted as "/data/media/0".
Please report any issues here in this thread and be sure to include which recovery you are using.
+++++++++++++++++++++++++++++++++++++
If you already have root, you can extract the recovery.img from this zip and flash it without Odin by using Flashify from the Play Store.
+++++++++++++++++++++++++++++++++++++
Click HERE to download the latest version.
Unofficial Philz Touch Advanced CWM recovery HERE for testing.
Credits to Phil3759. Original thread located HERE.
Hey hey hey...
Sent from my SPH-L710 using Tapatalk
You are awesome!!!!!
This is so very awesome....thank you!!!!
Sent from my SM-T110 using xda app-developers app
This is amazing, super fast devs rooting the tab 3 lite in no time.
Now it's waiting for a good stock Google rom to speed up this nice tab and losing the awful touchwhizz laggynes.
I have tryed almost all your custom recoverys CWM and none were working. When i try to eneter in recovery i got only blackscreen and the device it is seen by adb
But TWRM is perfect!
Thanks
Getting a notification to update but I haven't rooted yet so I'm not sure if I should.... Had my tab for about a week now....it says some kind of security update anybody else get this
Sent from my SM-T110 using xda app-developers app
mhopewell41 said:
Getting a notification to update but I haven't rooted yet so I'm not sure if I should.... Had my tab for about a week now....it says some kind of security update anybody else get this
Sent from my SM-T110 using xda app-developers app
Click to expand...
Click to collapse
Security is something else. Not software update.
It is a new protection from samsung, generaly with knox from 4.2.2 software and newer!
TWRP updated to version 2.7.0.0
Hi, thanks for the share of recovery, i have a problem tho, the device is in a bootloop of recovery, i press reboot to system in twrp and it reboots to twrp, if i power off the tablet and power on it boots to twrp, i've factory reset but stills reboots to twrp, what can i do?
sewa2k said:
Hi, thanks for the share of recovery, i have a problem tho, the device is in a bootloop of recovery, i press reboot to system in twrp and it reboots to twrp, if i power off the tablet and power on it boots to twrp, i've factory reset but stills reboots to twrp, what can i do?
Click to expand...
Click to collapse
Did you wipe anything while booted into recovery? I sounds like system or boot was wiped. You may need to flash the stock firmware in Odin.
Sent from my SM-T310 using Tapatalk
gr8nole said:
Did you wipe anything while booted into recovery? I sounds like system or boot was wiped. You may need to flash the stock firmware in Odin.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
Stuck in bootloop in recovery as well after rooting. Using CWM recovery and did not wipe anything at all. Going to try again.
sewa2k said:
Hi, thanks for the share of recovery, i have a problem tho, the device is in a bootloop of recovery, i press reboot to system in twrp and it reboots to twrp, if i power off the tablet and power on it boots to twrp, i've factory reset but stills reboots to twrp, what can i do?
Click to expand...
Click to collapse
mhopewell41 said:
Stuck in bootloop in recovery as well after rooting. Using CWM recovery and did not wipe anything at all. Going to try again.
Click to expand...
Click to collapse
Me to.. and im looking for a solution..
Streykatorato said:
Me to.. and im looking for a solution..
Click to expand...
Click to collapse
Try wiping cache.
gr8nole said:
Try wiping cache.
Click to expand...
Click to collapse
Didnt work.. tried.. any other solution?..
Streykatorato said:
Didnt work.. tried.. any other solution?..
Click to expand...
Click to collapse
Tried a full data wipe?
Sent from my SCH-I605
gr8nole said:
Tried a full data wipe?
Sent from my SCH-I605
Click to expand...
Click to collapse
Yup.. tried that too..
Hey guys!
my s3 mini i8190 is stuck on "Samsung Galaxy SIII Mini I8190" in infinite restart!
it's not reaching the samsung logo at all
it happened after i flashed cm11 novafusion 4.4.2 but i got no network (using maclaw twrp)
so i tried carbon but it was the same problem (no network)
so i flashed stock rom 4.1.2 (using odin) that's when this problem occured
plz if anyone has a clue on what this problem might be
Can u go into recovery mode?
o0VIP0o said:
Can u go into recovery mode?
Click to expand...
Click to collapse
thanks for responding!
yes i can go into recovery and download mode too
i tried to wipe cache and factory reset
but still the same
flash custom recovery and reflash rom from recovery
Gw|n said:
flash custom recovery and reflash rom from recovery
Click to expand...
Click to collapse
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery
warezhafid14 said:
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery
Click to expand...
Click to collapse
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app
xXPR0T0TYPEXx said:
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app
Click to expand...
Click to collapse
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery
warezhafid14 said:
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery
Click to expand...
Click to collapse
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.
moonryder said:
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.
Click to expand...
Click to collapse
thanks man
i will try that
eventhough i did it before
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
then flash stock rom and try it again.
otherwise i have no idea...
moonryder said:
then flash stock rom and try it again.
otherwise i have no idea...
Click to expand...
Click to collapse
thanks man for your time
i tried flashing stock rom many times even rooted ones
anyway thanks man
i appreciate your help
warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :
xXPR0T0TYPEXx said:
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :
Click to expand...
Click to collapse
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo
warezhafid14 said:
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo
Click to expand...
Click to collapse
Does it only happen if you flash TWRP?
xXPR0T0TYPEXx said:
Does it only happen if you flash TWRP?
Click to expand...
Click to collapse
CWM too
You said :
warezhafid14 said:
i tried flashable ones it gives me signature error
Click to expand...
Click to collapse
can you make a screenshot of this error?
xXPR0T0TYPEXx said:
You said : can you make a screenshot of this error?
Click to expand...
Click to collapse
when i turn on my phone it shows "Samsung Galaxy SIII Mini GT-I8190"
than it is supposed to show the samsung logo
but no it restarts and again "Samsung Galaxy SIII Mini GT-I8190"
infinite loop
and for flashing from recovery it said
E:signature verification failed
warezhafid14 said:
and for flashing from recovery it said
E:signature verification failed
Click to expand...
Click to collapse
Recovery must be custom.
Gw|n said:
Recovery must be custom.
Click to expand...
Click to collapse
that's what im trying to do
im trying to flash custom recovery