Database Develop

Wildfire Overclock

Hi all
I 've wildfire with root access .I tried to flash it with all custom ROMS's, only CyanogenMod run after reststart but wasn't stable, others couldn' t even start after reboot. Loaded kernels ,without OC dosn't help. I only need try OC .Can it be done without reflashing whole ROM ??

Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps

I use the stock HTC Wildfire ROM overclocked @768Mhz and sometimes it just get fkd up when i write messages ... Im gonna change phone asap
Sent from my HTC Wildfire using XDA App

MySelf_v1 said:
I use the stock HTC Wildfire ROM overclocked @768Mhz
Click to expand...
Click to collapse
My HTC switches off casualy on 768Mhz i think this is too high for any Wildfire

Mine seems stable now at max 652mhz and min 245mhz ... i get like 3.8 mflops and I think thats nice?

Mine works fine on cyanogenmod with oc 768 mhz

i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?

dakhr said:
Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps
Click to expand...
Click to collapse
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.

relesman said:
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.
Click to expand...
Click to collapse
Kernel from this topic:
forum.xda-developers.com/showthread.php?t=798471
Stock ROM-my Wildfire is completly "resistant" to any custom ROM(do not boot ,crash, screen freezes etc)

™¤»Aamir«¤™ said:
i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?
Click to expand...
Click to collapse
Yes i've orginal ROM only OC kernel flashed
Kernel here :
forum.xda-developers.com/showthread.php?t=798471

How to..
Hi, how do I overclock? I mean, what app do I have to use? I also find a picture showing the temperature in the status bar - maybe it is also possible to show the speed as well.
M.

buy SetCpu from android market

Mines can do 748mhz ,but if i set 768mhz,it can't boot and become a "soft brick"(use clockwork mod recovery to recover it)
I use cyanogen mod 7 #17

I found 691 to be most stable for every ROM i tried so far. SetCpu can be found free somewhere in the XDA forum.

[Q] What tweaks should i use to make my phone responsive and snappy ?

Hi every one , iam running Ginger bread XWJVZ 2.3.6 and a custom ROM ( Hybrid Rom latest version XWJVXZ ) and semaphore jvz 2.1.1
I think the rom has Thunderbolt already built in , iam asking u guys what else can i tweak to make my phone faster ??? i have ROM toolbox and semaphore tweaker
thx

enigma575 said:
Hi every one , iam running Ginger bread XWJVZ 2.3.6 and a custom ROM ( Hybrid Rom latest version XWJVXZ ) and semaphore jvz 2.1.1
I think the rom has Thunderbolt already built in , iam asking u guys what else can i tweak to make my phone faster ??? i have ROM toolbox and semaphore tweaker
thx
Click to expand...
Click to collapse
CM 7.1....

zolah said:
CM 7.1....
Click to expand...
Click to collapse
as far as i know , CM is not as stable as Samsung based roms
any suggestions on sammy based tweaks ?

Stock odexed jvt, Semaphore kernel 2.1.1 bm, use smartassv2 governor and sio scheduler, remove all Samsung bloatware, use ext4, wipe cache and dalvik, set low memory to 64 mb
Sent using TCP/IP

Try tornado rom - you will never look back...

i heard about that, were can u download it? evrywhere ive looked for that some other stuff comes up, usually its foreign so dont understand it

GalaxySN00B:0 said:
i heard about that, were can u download it? evrywhere ive looked for that some other stuff comes up, usually its foreign so dont understand it
Click to expand...
Click to collapse
http://damiangto.emc2production.org/index.php?sid=efe259a88b31669283caeda4d6ac7d04
Click to expand...
Click to collapse
here ..Go try it out

gsw5700 said:
Stock odexed jvt, Semaphore kernel 2.1.1 bm, use smartassv2 governor and sio scheduler, remove all Samsung bloatware, use ext4, wipe cache and dalvik, set low memory to 64 mb
Sent using TCP/IP
Click to expand...
Click to collapse
ok i have set the governor to smartassv2 , i think i don't have samsung's bloatware already ( the stock apps that comes with rom )
iam already on ext4 ,wiped cash and dalvik
how can i set low memory to 64 ????????
also can you explain to me what is a governor ? and what will the smartassv2 do ? thx

enigma575 said:
ok i have set the governor to smartassv2 , i think i don't have samsung's bloatware already ( the stock apps that comes with rom )
iam already on ext4 ,wiped cash and dalvik
how can i set low memory to 64 ????????
also can you explain to me what is a governor ? and what will the smartassv2 do ? thx
Click to expand...
Click to collapse
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP

gsw5700 said:
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP
Click to expand...
Click to collapse
thanks so much , i hit the thank button
i have one more problem , which is the icon of WIFI and signal , they are always grey , when i apply a custom skin for the signal , it only shows up when i turn wifi on , when i turn wifi off , the signal returns to the grey color again , any fix ?

gsw5700 said:
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP
Click to expand...
Click to collapse
I thought that with the "bm" kernal you lose HD recording.

You do lose hd recording, but you can still get great videos. If you do need full hd recording, flash non bm semaphor, after recording, flash bm back. Its very easy with sgs flasher
Sent using TCP/IP

pk1025 said:
I thought that with the "bm" kernal you lose HD recording.
Click to expand...
Click to collapse
you do lose hd recording indeed
iam now on cm 7.1 though

http://forum.xda-developers.com/showthread.php?t=1296927

[Q] [HELP] CPU Only 600Mhz

I have only 600Mhz.
I cant overclock only underclock, even with OC-Kernel.
The problem is on Stock Firmware 2.3.3 and Costoum Roms.
Is there a Hardware-Bug or what else?

Not all chips are made to the same quality. They only have to reach a certain clock speed to pass quality checks. Certain devices can be overclocked due to being of higher quality.
Sent from my HTC Desire S using XDA App

Yes but the default clock of the ACE is 800Mhz right? But MY default clock is 600Mhz.
I dont have any options to overclock only from 124Mhz - 600Mhz.
The default clock of 800Mhz would be ok for me..

You sure its a ace? Galaxy fit / mini & 551 / europa are 600mhz MSM7227 vs 800mhz MSM7227-t 800mhz galaxy gio / ace.

Yes! Its definitely a ACE i have the Samsung box here .. and there are a big label Galaxy ACE "800Mhz CPU"

Which rom are you using? Did you have the same problem on stock rom?

Do you have setcpu, if you do go on Info ; CPU what does it say ; Cpu Part / Cpu Revision / Hardware / Revision ?

If problem presist then go to Samsung service centre and change your phone dude
Sent from my GT-S5830 using xda premium

GerasVille said:
Which rom are you using? Did you have the same problem on stock rom?
Click to expand...
Click to collapse
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots

Cr0nFixXx! said:
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Click to expand...
Click to collapse
Hi @Cr0nFixXx!...
It would seem to me that your problem is your Kernel... The details in your first thumbnail show the kernel to be that of a different dev to @Ketut...!!! Your OC Kernel details should read as this : 2.6.35.7-perf-CL562111 [email protected]#4
The frequencies of the Cpu are governed solely by the kernel, so this is without a doubt your limiting factor...
The below kernel is tried & tested by thousands of users & is stable under OC...(check my sig for details)...
You can download this kernel from my dropbox here : http://dl.dropbox.com/u/44779766/cm-7.1-oc-kernel-2.6.35.7-perf-CL562111.zip
Flash this kernel from CWM recovery... Reboot phone, go to cyanogen setting/Performance & you should get the full cpu range for OC...
To see stable max OC set governor to "Performance"... Remember, only increase cpu frequency a little at a time & test for stability before increasing further...
Only when you have found your max stable clock speed can you tick "set on boot"...
FYI : OC kernels can only be used with custom roms... They will not work with stock roms... @Ketut's OC kernel will only work with CM7.1 / 7.2 Roms... Do not try with any other rom...
Stay Breezy n Be Lucky...
Pe"ACE"...

Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock

Cr0nFixXx! said:
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Click to expand...
Click to collapse
Hey Dude...
This is a very strange problem indeed... The Armv6 cpu is standard 600mhz cpu but samsung factory OC it when it is used in our aces... so we end up with an end-user frequency of 806mhz... Yours won't even reach that out of the box...?
Do me a favour... Flash this rom here : http://dl.dropbox.com/u/44779766/IceCreamSundayFinal_Tweaked.zip
It is IceCreamSunday Final by @Jusada... It is considered the fastest & most stable rom available on XDA & the OC kernel is inclusive of the rom...
Once flashed, go to cyanogenmod settings, performance, cpu & tell me what frequencies you get offered...?
FYI : It doesn't matter what your baseband or firmware version is... Ensure that you are using CWM 5 to flash with... Also ensure that before flashing you do a full system, cache, data, Dalvik wipe to ensure a clean flash... This rom is 7.2 btw...
Stay Breezy n Be Lucky...
Pe"ACE"...

I dont know whats my phones problem but it dont worked for me -.- even max. 600Mhz...
But great thanks for your help!

LoL the first thing that entered my mind is "maybe samsung forgot to overclock" my suggestion is go to samsung and tell them to overclock that.. or simply say it's defective

approach samsung and get new phone..

man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having

LazySam said:
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
Click to expand...
Click to collapse
but he should get 800 which he paid for

hey wait isnt ace's cpu like the 600mhz ones but only OC'ed to 800?

I'm done explaining

A fault with the processor probably.. ARMv6 anyway has 600Mhz by default and Ace has been factory overclocked to 800Mhz.. which is the simple reason why each Ace is so different and has so many problems regarding battery life. Overclocking is a delicate procedure..
To the point:
Just take it to the service center to get what you paid for!

[Q] overclock gpu to 400 mhz

hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french

up

pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.

pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
The only one I know of that allows GPU over clocking and voltage control is Thor kernel. Not found on xda as the creator is persona non grata. Google it.
I use the app Voltage Control to specify frequency and voltage settings, very useful. Give it a try.
Sent from my GT-N7000 using xda premium

eug3n91 said:
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.
Click to expand...
Click to collapse
He is saying GPU not CPU thus the 400Mhz.
I use Tegrak to oc the GPU with Franco kernel.
Sent from my GT-N7000 using XDA

Yeah use tegrak overclock but m using Abyss kernel nd my phone is buttery smooth

thanks shaolin95 but i don't find franco kernel for gingerbread, the only i found is for ics, can you give me a link please
edit: i've installed abyss kernel + bought tegrak kernel ultimate and it works ! thanks for your answer

i wanted to ask does overclocking the gpu help alot in games like more 10 fps ? and does it shorter the gpu's life ?
thanks alot

Overclocking

I want to overclock my N7000's CPU and GPU. Please guide me how to do it safely. :cyclops:
N7000 Intl
Kernel: PhilZ cwm6 v5.06.1 with CWM 6.0.3.2 based recovery
ROM: SlimBean 4.3 (Official Build 2.2-1745)

Your kernel has to allow you to do that and you have to use a program like cpu master, or You can search for overclocking in the settings.
Sent from d605

So, what kernel allows you to do that?
Sent from my GT-N7000 using XDA Premium 4 mobile app

The only way to overclock the n7000 worth mentioning
https://play.google.com/store/apps/details?id=com.tegrak.overclock.ultimate&hl=en
For gaming, i recommend:
Also, depending on how you use the phone you might want to underclock(and/or undervolt) the cpu (to avoid thermal throttle) and overclock the gpu (400 mhz works great on my phone, compared to stock 260)
For browsing the web and stuff like that:
consider overclocking the cpu to 1500-1600 (even 1650 has proven possible on my phone.)

try NX kernel (only for 4.2.2) or speedmod kernel.
for me samsung latest update is better for gaming because it has updated driver for mali (and you can use Titanium backup to freeze samsung's unwanted apps)
Sent from my GT-N7000 using XDA Premium 4 mobile app

Azeazezar said:
The only way to overclock the n7000 worth mentioning
https://play.google.com/store/apps/details?id=com.tegrak.overclock.ultimate&hl=en
For gaming, i recommend:
Also, depending on how you use the phone you might want to underclock(and/or undervolt) the cpu (to avoid thermal throttle) and overclock the gpu (400 mhz works great on my phone, compared to stock 260)
For browsing the web and stuff like that:
consider overclocking the cpu to 1500-1600 (even 1650 has proven possible on my phone.)
Click to expand...
Click to collapse
Can you please give ROM and Kernel details of your N7000? What android version you are on?
I want to overclock for gaming.

manigma said:
Can you please give ROM and Kernel details of your N7000? What android version you are on?
I want to overclock for gaming.
Click to expand...
Click to collapse
I am on asylum rum.
However, on this ROM, my GPU does not scale properly. So for gaming its not great.
NX kernel is great for gaming, unfortunately it's a bit dated.
In my opinion cm 4.3-based Roms work well.
But , changing ROM does not have as big an effect compared to overclocking the GPU.