Hi
Just bought a G1 off eBay, very pleased nice price.
I have a few questions if you can answer them.
1. As far as i know the G1 is stock and runs (will it be) cupcake? Is it 1.5?
If i decide to upgrade a 2.2 rom can i downgrade to 1.5/6?
2. Is it easy to root?
3. Could you post a nice "how to flash a G1" tut?
4. recovery? is it installed via fastboot?
Thanks
And i hope you can answer these questions for me!
in market, search "Universal Androot" to get root permissions easily.
as far as rom upgrading, the forums have several tutorials that you can search easily so it would be redundant to repost them just figure out which rom you want and they give instructions in the threads
I prefer Biffmod 2.1, it runs smoothly for me(its Froyo)
Good Luck
Start Here work your way down thru each link before you do anything, READ!!!!!!!!
Thanks!
Will take a look.
!!ATTENTION!!
THIS INFORMATION HAS BECOME OUTDATED.
There are probably newer and easier ways of accomplishing your goals that are now available. Read the entire thread for tips from other people about how to get your phone rooted - their suggestions are likely to be better options for your needs. I will not be maintaining this thread, but I will leave it up as a record for others to read. Good luck!
_______________________________________________
Original Post:
Hi. I had trouble getting my Optimus One from Koodo Mobile rooted. So, here is some info that I hope will help others get through the process a bit faster. I mainly followed the instructions in various threads from XDA, but I needed to do things differently.
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB. I'M JUST TRYING TO HELP.
!!! ALSO, I TAKE NO RESPONSIBILTY FOR ANYTHING GOOD OR BAD THAT COMES FROM APPLYING WHAT IS SAID IN THIS THREAD.
!!! THIS INFORMATION IS ONLY INTENDED FOR USE ON THE OPTIMUS ONE FROM KOODO MOBILE RUNNING FIRMWARE VERSION 10v.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
-----------------------------------------------------------
Drivers
So, first I installed the LG PC Suite software because I think that gets you the USB drivers needed for this phone. I think LG calls it "Download LG Mobile Support Tool to PC" on their support site at:
http://www.lg.com/sg/support/product/support-product-profile-mobile-redux.jsp?customerModelCode=Optimus%20One%20P500&initialTab=drivers&targetPage=support-product-profile-mobile-redux
Telus 2.2 firmware version V10G_00
So, since android 2.2.1 is not rootable on Optimus One, I had to downgrade to android 2.2. I found a link to a Telus version of P500h that is android 2.2 at the following link (make sure you download the one that ends in "V10G_00.kdz"):
http://forum.xda-developers.com/showthread.php?p=12253960#post12253960
Installing Telus firmware using KDZ
I followed steps #2 through #8 from the following link:
http://forum.xda-developers.com/showthread.php?t=875881
KDZ worked well, just so you know.
Rooting
Now I used "z4root" to permanently root. It was super easy (way easier than rooting my MT3G Slide). z4root is NOT in the market anymore so you need to sideload it onto your SD storage, then install it with any apk manager.
This site:
http://forum.xda-developers.com/showthread.php?t=901247
led me to this site, where I downloaded z4root from:
http://forum.xda-developers.com/showthread.php?t=833953
After that, I was all rooted up... finally.
So, I obviously am NOT trying to take any credit for the real efforts made by others. I want to say thank you to all people involved with the links and programs I referred to. I really appreciate what people do for others here at XDA. My phones would not be rooted or other kinds of fun without those people.
THANKS!
-------------------------------------------------------------------------
On a bit of a side note, you might want to unlock you phone too... so you could use it with FIDO, etc. So, I used a site called "mobileincanada". It was $20 and took less than 24 hrs to get the code. I was happy with that.
Nice write-up, I had to follow a similar path. The most trouble I had was finding a firmware that worked.. I ended up using the same TELUS firmware. It works great, much faster than the original Koodo firmware.
Sorry for my question: what is the difference between your P500h and the other P500 devices? is it a branded device with special firmware?
I thought, all P500 can be flashed with every P500 *.kdz (for country) or XDA ROMs
for P500
I wished you wrote this yesterday but thanks. I figured it out yesterday . This is the sickest 150$ phone I have ever had. I get 1100 quadrant score :O
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Kwen said:
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Click to expand...
Click to collapse
Hi. Thanks for that.
Also, if you want to, feel free to answer any of the questions that come up in the thread. You definitely are better equipped than I am.
i downgraded to 22
rooted
now i want to install the custom fw.
copied both files from the link for custom flash.
and i can't get into adb
device not found
win7 64bit
all the drivers are installed and yet I have yellow ! icon on adnroid single adb platform
i had to manually sign the adb driver on w7 64
using
dseo13b.exe
after signing the driver, adb connects and I loaded custom recovery
I am installing custom rom now.
thnkas.
downgrade
hi im from philippines
i want to downgrade from 2.2.1 to 2.2
can i use the firmware above?
if not can you help me find a suitable fw that i can use here in philippines?
i found some links where dead
leegoon84 said:
i downgraded to 22
rooted
now i want to install the custom fw.
copied both files from the link for custom flash.
and i can't get into adb
device not found
win7 64bit
all the drivers are installed and yet I have yellow ! icon on adnroid single adb platform
Click to expand...
Click to collapse
Ok. I don't really get why you mentioned this stuff.
Taylortron3030 said:
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
Click to expand...
Click to collapse
andy572 said:
Sorry for my question: what is the difference between your P500h and the other P500 devices? is it a branded device with special firmware?
I thought, all P500 can be flashed with every P500 *.kdz (for country) or XDA ROMs
for P500
Click to expand...
Click to collapse
Like I said, I dunno. So, I'm sorry too.
Taylortron3030 said:
Hi. Thanks for that.
Also, if you want to, feel free to answer any of the questions that come up in the thread. You definitely are better equipped than I am.
Edit: Just so you know, it seems the link to zubu.ca is not working. When I clicked on it chrome said "Oops! This link appears to be broken.".
Click to expand...
Click to collapse
Fixed the link
this may be off topic but what are the custom roms that you can flash to p500h? any one tried installing one?
Thank you, I thought I broke the phone when I flashed V10A_00, it wouldn't boot into screen. Telus one indeed is nicer than Koodo's.
peacekeeper05 said:
this may be off topic but what are the custom roms that you can flash to p500h? any one tried installing one?
Click to expand...
Click to collapse
mik_os Gingerbread based on CM7
andy Gingerbread Based on CM7
the following are all froyo
lol
void
darkmoon
megatron prime
and others
I use mik 2.3 beta4, still the best and snappiest with adw launcher o/c to 320 min 768 max.
sorry for the newbie question. i just bought the Koodo version but am on telus network. So should i follow procedure in the first post?
Kwen said:
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Click to expand...
Click to collapse
Thanks Kwen! This is very useful - now no need for the kdz updater.
Edit: or now we can keep the Koodo version of 2.2.1 and just root it using Gingerbreak (http://forum.xda-developers.com/showthread.php?t=1044765) - no KDZ needed, no recovery needed (prior to root). Obviously, recovery is still recommended after root.
the only question that i have is where can i GET the stock 2.2.1 for my provider? i'm with Koodo, and i live the custom roms, but i need to flash back to stock to see if i can get my mms working correctly again. and i apologize in advance if this is the wrong thread.
Taylortron3030 said:
Hi. I had trouble getting my Optimus One from Koodo Mobile rooted. So, here is some info that I hope will help others get through the process a bit faster. I mainly followed the instructions in various threads from XDA, but I needed to do things differently.
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB. I'M JUST TRYING TO HELP.
!!! ALSO, I TAKE NO RESPONSIBILTY FOR ANYTHING GOOD OR BAD THAT COMES FROM APPLYING WHAT IS SAID IN THIS THREAD.
!!! THIS INFORMATION IS ONLY INTENDED FOR USE ON THE OPTIMUS ONE FROM KOODO MOBILE RUNNING FIRMWARE VERSION 10v.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
-----------------------------------------------------------
Drivers
So, first I installed the LG PC Suite software because I think that gets you the USB drivers needed for this phone. I think LG calls it "Download LG Mobile Support Tool to PC" on their support site at:
http://www.lg.com/sg/support/produc...rgetPage=support-product-profile-mobile-redux
Telus 2.2 firmware version V10G_00
So, since android 2.2.1 is not rootable on Optimus One, I had to downgrade to android 2.2. I found a link to a Telus version of P500h that is android 2.2 at the following link (make sure you download the one that ends in "V10G_00.kdz"):
http://forum.xda-developers.com/showthread.php?p=12253960#post12253960
Installing Telus firmware using KDZ
I followed steps #2 through #8 from the following link:
http://forum.xda-developers.com/showthread.php?t=875881
KDZ worked well, just so you know.
Rooting
Now I used "z4root" to permanently root. It was super easy (way easier than rooting my MT3G Slide). z4root is NOT in the market anymore so you need to sideload it onto your SD storage, then install it with any apk manager.
This site:
http://forum.xda-developers.com/showthread.php?t=901247
led me to this site, where I downloaded z4root from:
http://forum.xda-developers.com/showthread.php?t=833953
After that, I was all rooted up... finally.
So, I obviously am NOT trying to take any credit for the real efforts made by others. I want to say thank you to all people involved with the links and programs I referred to. I really appreciate what people do for others here at XDA. My phones would not be rooted or other kinds of fun without those people.
THANKS!
-------------------------------------------------------------------------
On a bit of a side note, you might want to unlock you phone too... so you could use it with FIDO, etc. So, I used a site called "mobileincanada". It was $20 and took less than 24 hrs to get the code. I was happy with that.
Click to expand...
Click to collapse
EASY WAY is Gingerbreak APK v1.2
;only takes like 2 minutes.
Sent from my LG-P509 (Optimus T) with Void Gear using XDA App
lol just found out, Gingerbreak 1.2 works fine....
Hey everyone,
I am just wondering if there's a guide for rooting the HTC One running on 4.3 update also it's an AT&T carrier if that helps. If someone can link me to a good guide including backing up and saving what I have on the phone currently. I'm also wondering once I do root my phone, what ROM is a good and stable one to use for a first timer. Just let me know, I appreciate it!
5one2 said:
Hey everyone,
I am just wondering if there's a guide for rooting the HTC One running on 4.3 update also it's an AT&T carrier if that helps. If someone can link me to a good guide including backing up and saving what I have on the phone currently. I'm also wondering once I do root my phone, what ROM is a good and stable one to use for a first timer. Just let me know, I appreciate it!
Click to expand...
Click to collapse
welcome mate. checkout this thread: http://forum.xda-developers.com/showthread.php?t=2438026
details regarding unlocking and flashing are in post 2.
have a good read before you start - will save you potential tears.
I'm thinking about rooting and flashing my vanilla LG-P999 (Wind Mobile version, which I understand is identical to the T-mobile LG Optimus 2X or something.
Nothing fancy, I just want to upgrade to at least 2.3.3 version of Android so I can use some apps that aren't completely archaic. From the digging around I've done it seems like CM7 is the best way to go for my phone, and a video tutorial I've found (I'll link below) outlines how I can root my phone with SuperOneClick and flash to CM7.
Now this is my first time doing anything of the sort, so I'm quite nervous. Please bear with my newbie questions:
- As I understand it, flashing to CM7 requires rooting my phone. The video tutorial (watch?v=yH3qKLXqdSg, I can't post external links so this is the best I can do) outlines the procedure for a LG-P990 using SuperOneClick, whereas my phone is a LG-P999. I'm assuming that it shouldn't be a problem?
- I only want to upgrade my phone to Android 2.3.3 (it's the stock 2.2.2 right now). Another forum told me that CM7 is the most stable "mod" to flash to to accomplish this. Did I understand that right or does CM7 do something else entirely? I was trying to check out the CM wiki but that apparently no longer exists.
If anyone has a more updated method or any other recommendations it would be great if you can help. If this is a redundant thread please delete this thread and point me in the right direction. Much thanks.
SuperOneClick should work with your phone. If you only want the newer Android version, I believe there should also be an LG upgrade available to 2.3.4 for your phone. So, rooting is not a must, but on P990 CM7 is quite nice compared to stock
For more information you might want to try this forum, which is specifically for your phone.
Hi everyone. So I'm brand new to rooting. This is my first rooted phone. I have the Att Variant of the Galaxy S5 and I'm looking to install a custom Recovery so I can save my phone if anything happens to it. From reading I'm pretty sure my only option is Safestrap? I'm running KitKat 4.4.4 with build OA1.
I did see and find tutorials and DL links for NG3. But I don't want to install that if that is not what I need for my phone. (Obviously). If anyone can help me and point me in the right direction that would be great and HIGHLY APPRECIATED.
I also know I want to get rid of the bloatware on my phone and install an adblocker
Any suggestions on how to do thos or apps to look into ?
Also any other this you guys would first do after rooting a new phone for the first time
Please and thanks. Glad to finally be apart of this Community.
:victory: :victory: :victory:
James.Markham0757 said:
Hi everyone. So I'm brand new to rooting. This is my first rooted phone. I have the Att Variant of the Galaxy S5 and I'm looking to install a custom Recovery so I can save my phone if anything happens to it. From reading I'm pretty sure my only option is Safestrap? I'm running KitKat 4.4.4 with build OA1.
I did see and find tutorials and DL links for NG3. But I don't want to install that if that is not what I need for my phone. (Obviously). If anyone can help me and point me in the right direction that would be great and HIGHLY APPRECIATED.
I also know I want to get rid of the bloatware on my phone and install an adblocker
Any suggestions on how to do thos or apps to look into ?
Also any other this you guys would first do after rooting a new phone for the first time
Please and thanks. Glad to finally be apart of this Community.
:victory: :victory: :victory:
Click to expand...
Click to collapse
Start here, not in the dev forum.
http://forum.xda-developers.com/att-galaxy-s5/general, http://forum.xda-developers.com/att-galaxy-s5/help
Sorry, I though this was help and trouble shooting.
Headed there now.
I did install the ND3 and it works fine on OA1 if anyone else has this question.