Related
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Yeh happened a few times. Are you using the right pit file? Also set odin to win xp compatibility mode with admin access. Unplug all usb except mouse and kb and try again
Worst case find yaself a xp box and do it there.
Sent from my GT-I9000 using Tapatalk
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Did you follow exactly the instruction given? You may read the link below
http://forum.xda-developers.com/showpost.php?p=7940762&postcount=1
It did happen to me once , i was on windows 7 , i installed xp on my macbook and since then all my flash went great.
Sent from my GT-I9000 using XDA App
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Where is the pit file you are using .
jje
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
razyell said:
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
Click to expand...
Click to collapse
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
done.
JJEgan said:
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
Click to expand...
Click to collapse
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
My i9003 gets stuck there. i tried to emulate but i get an error regarding the PDA. can u please let us know how u did it???
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
this is the error i get in the virtual pc in xp mode
i solved it by plugging the cord into another port and letting windows rediscover the phone
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
Plus One to this solution. Thought I killed my phone.
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
+1
soft brick
i got the same problem.
cant get it right. im on winxp 32 got the pit file from this thread and stock rom MDC from Sammobile site.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Removed!!
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Added!!
I don't know what happened, I switched from pc to laptop and tried the same thing with pit file, same error, but my phone is working now. No changes in the phone it's still in MDL and I have superuser app but it says binary not found. Can't install binary also...
Sent from my SPH-L710 using Tapatalk 2
SOLVED
http://forum.xda-developers.com/showthread.php?t=2298876
[solved] pit file not found error
Sent from my SPH-L710 using Tapatalk 2
same problem :/
n30nix said:
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Click to expand...
Click to collapse
same problem dud , i didnt find any solution so far ! :/
moody-mj said:
same problem dud , i didnt find any solution so far ! :/
Click to expand...
Click to collapse
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
thx for your fast replay...
pvinodnayak said:
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
first of all thanks for your fast reply
i've downloaded this firmware ( \N7100XXDLJ2 OXA FACTORY )
and tried it , didnt work
i work at samsung company in lebanon , and i have all the offical firmwares
i tried them , it wont work
in odin 3.04 it wont work , it quickly fails with out even starts ( re-partition operation failed )
and in odin 3.07 ( get pit for mapping ) and stucks on ( set partition )
i tried allot of different PIT files , and unticking ( re-partition ) nothing happend , and it only goes to download mode , or when i turned it on , it stucks on ( samsung galaxy note II ) plz help me
Hi everybody!
This is my first posting here, I hope it's in the right category. I've used the search function, found similar problems but no one facing the same issue. I wanted to upgrade to Android 2.3.3 (2.3.4) using Odin. I tried three different Firmware releases but none worked. This is what happens in Odin:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVI_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVO.tar.md5 is valid.
<OSM> CSC_DBTJV2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> param.lfs
<ID:0/006> zImage
I tried with and without repartition. Sometimes the process stops at the SetupConnection line, sometimes at zImage when obviously the kernel should be installed. When in download mode, I see a blue progress bar starting to move across the phone screen, but soon later the whole display turns green/blue/white (it always had a different color) with no more text. Hours later Odin finally displays a FAIL message.
I tried firmware versions I9000XXJVQ and I9000XXJVR from samfirmware.com with 512 PIT file. I recognized some Kies-Thread running in the background on my Win7 machine, which I killed to prevent any problems.
In another forum I was told this issue might be related to some lagfixes installing ext4. When I read that it came to my mind that I indeed had installed the voodoo lagfix in February - I had completely forgotten about that. However, is there a chance to recover the phone? Putting it into DL mode is the only thing that works. Any help is appreciated!
Can you go in recovery mode to disable the lagfix? and when you use the 3 part file always check re-partition.
Had similar problems with Windows 7 x64, 2 in 3 flashes would fail.
Try another pc if possible with Xp.
kuribo67 said:
Can you go in recovery mode to disable the lagfix?
Click to expand...
Click to collapse
Well, I tried, but I did not succeed - (Hold Vol up + Power on) but I'll try again. Is it absolutely necessary to remove the lagfix? As mentioned before someone told me that ext4 might be causing those problems. However, I though the sd was repartitioned (when checkbox is ticked) and the firmware is a kind of disk image which is installed and thus overwrites the existing file system?
aileron79 said:
Well, I tried, but I did not succeed - (Hold Vol up + Power on) but I'll try again. Is it absolutely necessary to remove the lagfix? As mentioned before someone told me that ext4 might be causing those problems. However, I though the sd was repartitioned (when checkbox is ticked) and the firmware is a kind of disk image which is installed and thus overwrites the existing file system?
Click to expand...
Click to collapse
it's vol up + home button + power on, but don't release the button untill your are in the menu.
A stock firmware is made for RFS partition not ext4, i think it's that the problem, but i may be wrong.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVI_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVO.tar.md5 is valid.
<OSM> CSC_DBTJV2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> zImage
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> factoryfs.rfs
Thank you all so far! Well, it almost worked - at least kind of. I tried it a couple of times, rebooted the PC, rebooted the phone, reinstalled drivers, used another USB port. After a couple of retries it stopped at "factoryfs.rfs" - which obviously contains the file system. This makes me guess that it does not matter which FS currently is installed as it gets overwritten by this factoryfs-thing. Please correct me if I am wrong!
Still, any help on this topic is gladly appreciated!
when you flash pda in odin the file system is over-written and reverts to rfs.
Try without re-partition ticked. Also after several attempts your battery may have no juice left in it: pull the battery, let it sit a couplce of minutes and then plug it in and see if it will re-charge -- may not, you might be stuck at download and odin.
Flash an older 2.2 firmware first: pda. phone and csc, don't bother with the pit file and don't bother with re-partition -- this is just to get you back and working, you can then charge the battery and update to jvr after.
Also check the thread on unbricking the phone -- most issues with flashing are recoverable, its just persistence.
lgsshedden said:
when you flash pda in odin the file system is over-written and reverts to rfs.
Try without re-partition ticked. Also after several attempts your battery may have no juice left in it: pull the battery, let it sit a couplce of minutes and then plug it in and see if it will re-charge -- may not, you might be stuck at download and odin.
Click to expand...
Click to collapse
Well, I tried to flash with and without repartition/pit-file. The download process hangs at different stages. I doubt it has to do with the battery, as the phone has been attached to the PC for almost three days now, I guess the battery is charged then...?
[/QUOTE]
Flash an older 2.2 firmware first: pda. phone and csc, don't bother with the pit file and don't bother with re-partition -- this is just to get you back and working, you can then charge the battery and update to jvr after.
Also check the thread on unbricking the phone -- most issues with flashing are recoverable, its just persistence.[/QUOTE]
To which of the thousands of unbricking threads do you refer? I read something about a tool which puts the phone into recovery mode, from where I can format the sd. However, I can't get to recovery mode by pressing vol up, home + power, i just can enter download mode. I have tried various firmwares, neither did work...
Thanks for your help so far, maybe you can give me another hint on the thread you're talking about?
Try rebooting the phone,rebooting the pc,use a different usb cable(this part made it work for me), and try again. Hope it helps man cause i've been down that road and it sucked bricked my sgs 2 times but thankfully revived it because heimdall one click un-brick oh and 1 more thing if you use 3 files check re partition
Sent from my GT-I9000 using xda premium
Mate, try a full 3 file flash and a pc with Win XP 32-bit and ODIN 1.83
Worked for me
Good luck flashing !!
Thank you all guys, it worked - even though it was none of the tips provided here. I have no clue what the problem was, I moved to another PC, it took me three tries to flash the phone.
- The second PC was Win7 64bit as well.
- I used the original cable (tried with another one as well, no difference)
- I used just the drivers without any Kies installation.
- I used a SINGLE FILE FLASH with Android 2.2.1 first (which I was then unable to boot as it stuck with the S symbol during boot)
- Flashed 2.3.4 afterwards - worked.
My phone has never ever been running so smoothly before, even with lag fixes!
Unfortunately, my external SD makes troubles, but let's see how to fix that.
My note to all of you guys facing similar problems:
Some say, use PIT and repartition, some say, don't
Just don't care - for me it finally worked without (single file flash). Try all possibilities.
Some say, install Kies, just because of the drivers, some say, install the drivers without Kies
Just don't care - try either option, it might work - for me the drivers without Kies finally worked but I have no clue if that had any impact.
Some say, use another USB cable, some say use the original one
Just don't care - try different cables if possible, in my case there was no difference.
Some say, use the USB port closest to your MB, others say, try various USB ports
Just don't care - try different ports, the behavior cannot be reproduced, each try the flashing process got stuck at another stage - independent of the USB port used.
Some say, try another computer with another OS
Good choice - that made it working in my case. Even though the other machine was nearly the same with exactly the same OS installed. Also, I have successfully flashed my phone with the first one before.
Thanks guys, you're the best! And give Android 2.3.4 a try, it's FAST and SMOOTH!
Hi guys and girls.
I've been frantically searching XDA for the last few hours for a definitive answer, but to no avail, so thought it's about time I just asked!
I have in my possession a Samsung Galaxy S19000, that will only go into download made.
Here's how it happened........
This morning, I was given the phone by my brother in law and asked to root it and upgrade it to a newer/better rom. When it was passed
to me, it was.....
Firmware: 2.2.1
Baseband: 19000XXJY
Kernel: 2.6.32.9
[email protected] #1
Build: FROYO.XXJPY
After a successful root and upgrade, the phone ended up like this...
Firmware: 2.3.7
Baseband: 19000XXJVK
Kernel: 2.6.35.14-g3088622
Build: CyanogenMod-7.2.0-galaxysmtd
The new Rom, as nice as it was, wasnt what he wanted, so he asked me to restore it back to it's stock state. I went into CMW and did a restore, but it failed, and now the phone will only go into download mode.
I've tried flashing a stock rom via Odin, but it got as far as the 'Nand write' stage, then hangs.
Kies doesn't show up the device in 'Emergency firmware recovery' either.
I no all is not lost, so I'm not giving up. Any help will be much appreciated.
:fingers-crossed:
Can you post the whole Odin Log?
Normally this happen when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
Maybe it helps to flash the pit file to repartition.
To add.....
When the phone is off, it displays the 'phone and computer with an explanation mark triangle inbetween symbol', and Kies doesnt recognise it. When I enter download mode, Kies hangs at 'Connecting' for.....well..ever! So atleast I know it's recognised by my PC (ish) and it isn't completely dead :silly:
I had the same thing with the triangle a few months ago.
I just flashed a Stock Firmware with Repartition. Just be sure with Odin that you have ticked the right things Afterwards it worked.
Thankyou for you reply, and sorry for the delay posting back. God damn new user restrictions!!!
KUN1 said:
Can you post the whole Odin Log?
Click to expand...
Click to collapse
Heres what Im getting...
Code:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!
First try it with Repartition. If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
KUN1 said:
First try it with Repartition.
Click to expand...
Click to collapse
You'll have to excuse me, I've never had problems problems before, so I've only had to use the PDA box till now.....
Is that the re-partition tick box, or the re-partition PIT file box??
KUN1 said:
If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
Christ that looks involved doesn't it! I think that be a last resort as it looks like I'll need to clear a day in my diary before I start!
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
KUN1 said:
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
Click to expand...
Click to collapse
SOLVED
I couldnt sleep, so decided to have another bash at getting this phone going again.
Many many thanks to KUN1 for hunting down and PM'ing me the necessary Odin MD5 and PIT files to use for the method he posted above.
:victory:Success:victory:
You've been a life saver sir :good:
haha no problem
[Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode screen
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin. It created a big problem for me. I couldn't go in to download mode after this.
So finally I purchased USB jig to enable Download mode (last option to make mobile in download mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box showing some port no. Above output comes when i continue with installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
vishu_10d said:
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin s/w. It created a big problem for me. I couldnt go in to downlaod mode after this.
So finally I purchased USB jig to enabled Download mode (last option to make mobile in downlaod mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box with some port number. Above output is comes when i continue installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
Click to expand...
Click to collapse
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
BWolf56 said:
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
Click to expand...
Click to collapse
Thanks for the reply...
I tried with Odin one click downloader also... but it is failing... attaching the image...
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
I followed the steps written in the forum above. But that is not working my case. I tried the steps in different computer with diff OS installed. but still same problem.
Is there any way to get PHONE, PDA, CSC file separately for i897 ? I could install I9000 in my samsung captivate mobile which had these files. So just thought, if i can get these files for i897, probably it should work?
Any Idea where i can get these files?
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
Still my problem is same. I went through the link. but that is also not helping.
In my phone, I cant see download screen, even though if i use USB jig.
When I run Odin s/w, I can see in odin as port "Added" when Connect my mobile with computer using usb port.
Usually Odin show port added when u are in download mode. But here in my case, when i first USB jig and then connect to computer, download mode screen message and image doesnt come. it shows nothing(like no display). But I can see , Odin shows port Added. and I could update kernel, do partitions etc. But when I select Image file as PDA. and click start. It always fails.
Is it happening because i cant see download mode screen ?
1. What firmware I need to install and how which contains code for showing download screen ?
2. Or can anybody provide me all files i.e. PIT, Bootloader, PDA, Phone, CSC for odin so that i can select all files in respective fields under Odin software and start update?
Please help.
One more thing i have noticed.. here is the output of odin when i update my mobile with following files of I9000 model. while trying images for my captivate mobile, I found a zip file for model GT I9000 and package name was -GT_I9000_ZSJPK_ZSJPG_OZSJPG. It had three files as - 1. CSC_OZSJPG.tar.md5. 2. PDA_ZSJPK.tar.md5. 3. PHONE_ZSJPG.tar.md5.
I selected this files in corresponding PHONE, CSC, PDA fields in odin and it updates phone successfully with the following output -
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_ZSJPK.tar.md5 is valid.
<OSM> PHONE_ZSJPG.tar.md5 is valid.
<OSM> CSC_OZSJPG.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> param.lfs
<ID:0/017> zImage
<ID:0/017> factoryfs.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> modem.bin
<ID:0/017> cache.rfs
<ID:0/017> Removed!!
<ID:0/017> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Added!!
<ID:0/018> Removed!!
<ID:0/019> Added!!
But even though i can see my phone with I9000 model image installed. but most of the operations it doesnt work. might be becoz image is not fully compatible with Captivate model. so no use.
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
x0ne215 said:
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
Click to expand...
Click to collapse
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
vishu_10d said:
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
Click to expand...
Click to collapse
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
vishu_10d said:
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
Click to expand...
Click to collapse
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
BWolf56 said:
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
Click to expand...
Click to collapse
Hi,
when i usb jig and after that connect to system. I can see port Added in Odin software. which ideally happens when mobile is in downlaod mode.
but here for me display doesnt show anything on screen, screen remain blank. No android icon comes. but still I can see port added in odin and also can install files in the mobile. like pit, bootloader PDA files. etc.
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
vishu_10d said:
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
Click to expand...
Click to collapse
I believe 4-2ndtwin has the link to them in his sig.
BWolf56 said:
I believe 4-2ndtwin has the link to them in his sig.
Click to expand...
Click to collapse
So any suggestions ? what should I do now ?
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
Search for 4-2ndtwin.. Go into his profile, then sig link and find the separated files.
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
You need Jtag
Check my signature for more detail.
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks a lot for providing me these files. This is what I wanted. I will try as you suggested and will let you know the result.
Thanks
Hello, I've had my Galaxy Note GT-N7000 for about a year now. I've never rooted it before.
This morning I was browsing my phone and it just shut off and went to the "Samsung GALAXY Note GT-N7000" boot screen.
I saw on other forms instructions on how to hard reset the N7000 (Remove battery, put back in, then hold Volume up, Power and Home button, then it gives you a menu to choose from)
When I do that it doesn't give me a menu screen, It just goes to the boot screen I described above, or it goes to the little green android man with the rotating object in him, then back to the (GT-N7000) boot screen a few minutes later.
I have a macbook, so I can't use the odin program. (Nor would I know how)
I don't mind wiping all the data from my phone and restarting from the beginning.
I have all the stuff I need (phone numbers) stored on my google account. And I can redownload my main apps I liked.
Any ideas?
Update
I have a windows computer I can use, so I want to use Odin to put the normal firmware back on my phone.
I am having a hard time finding the USA firmware for the GT-N7000. I have been looking all around but cannot seem to find it.
Can anybody help me out?
Check in Samfirmware.com.
No USA firmwares
nokiamodeln91 said:
Check in Samfirmware.com.
Click to expand...
Click to collapse
Thanks, I checked that site, but the don't seem to have USA firmware for GT-N7000? Is there another country's that I can use instead?
You can use any country s rom.
THANKS
nokiamodeln91 said:
You can use any country s rom.
Click to expand...
Click to collapse
Thank you very much I'll go ahead and use the UK one since it will boot in English then.
Any tips on using Odin? Or things I should do or avoid? I don't want to brick my phone by accident.
Use the rom in pda. Don't tick anything else other than default.
You sir, are awesome.
nokiamodeln91 said:
Use the rom in pda. Don't tick anything else other than default.
Click to expand...
Click to collapse
Thank you! That was exactly what I needed to know!
I'm currently downloading the ROM, I will update after I've used ODIN.
Also my phone is at 100% battery in preparation since people said to make sure it was charged before flashing.
Slight Problem...
I'm using Odin v1.85 following the instructions above and it has gotten stuck on "NAND Write Start!" for the past 15 minutes.
It doesn't seem like it is going to do anything. What should I do?
Still? Wait for some more time. Then kill kies processes and run odin as administrator. Boot into download mode again. And try.
I'm windows inept
nokiamodeln91 said:
Still? Wait for some more time. Then kill kies processes and run odin as administrator. Boot into download mode again. And try.
Click to expand...
Click to collapse
I waited about 15 more minutes then held the power button to turn it off. So now it's off and charging again.
These may be really really dumb questions, but:
1) how do i kill kies processes?
2) And how do I run as administrator?
Sorry, I'm sorta windows inept since I've been using a macbook for the past 5 years.
Open task manager and check anything related to kies. Also make sure samsung usb drivers are properly installed. If not or in doubt, download and install kies first. Then plug the phone in and with for the drivers to install.
On the phone and check what is the message on screen, if it's a firmware recovery screen the try connecting with kies recovery option. If still stuck on logo, kill all kies process. Right click on odin and run as administrator. The put phone on download and flash.
Trying it soon
I didn't have kies installed, so I am installing it right now. So once that is installed I will try it out and let you know if it works :fingers-crossed:
Updating right now
I just started updating at 10:28
I downloaded Kies, and the screen wasn't in emergency recovery, so I killed all kies processes and then i put my phone into download mode and started ODIN v1.85 as an administrator and plugged in my phone.
By 10:29 it hit <ID:0/004> NAND Write Start!!
It's 10:45 and it's still on NAND Write Start!!
Here's the whole transcript:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLSZ_N7000XXLSO_N7000OXXLS4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
There must be problem with emmc. Use the pit file method to install correctly. Flash the pit file first with re-partition ticked and others un-ticked. See if it goes successful. Then flash your PDA with re-partition un-ticked and reboot and reset ticked.
Is there any certain pit file thread that you would point me towards?
I been looking and I found a couple, but they all vary a little and I really really don't want to brick my phone.
Use the pit file from Dr ketans flashing guide
nokiamodeln91 said:
Use the pit file from Dr ketans flashing guide
Click to expand...
Click to collapse
I went to Dr. Ketan's post http://forum.xda-developers.com/showthread.php?t=1424997 and downloaded Q1_20110914_16GB.pit
Right now I'm flashing the pit file first with re-partition ticked and others un-ticked.
What should I do if it gets stuck at <ID:0/005> DO NOT TURN OFF TARGET!!?
It's been at that step for about 7 minutes now, and I just want to know what I should do in case it doesn't move past that.
Galaxtus said:
There must be problem with emmc. Use the pit file method to install correctly. Flash the pit file first with re-partition ticked and others un-ticked. See if it goes successful. Then flash your PDA with re-partition un-ticked and reboot and reset ticked.
Click to expand...
Click to collapse
I've been flashing it for about 20 minutes now, using the pit file with only re-partition ticked. It hast't moved past <ID:0/005> DO NOT TURN OFF TARGET!!
Should i be worried, or does re-partitioning with the pit file take a long time?
Was I supposed to have the PDA file in there too while flashing, or just the pit file? I really hope I didn't f this up...
I don't want a really expensive paper weight
DEAD
It was sitting there flashing with the pit file and my friend threw a ball at me and it hit the usb cable and it unplugged my phone from the computer. Then the computer wouldn't recognize my device anymore. I tried to turn my device back into download mode to restart the process but it won't even turn on or show that it is charging when plugged in.
I guess this is the end
Unless anybody out there is a miracle worker.