[Q] Audio disabled when docked after Honey update - Dell Streak 7

Purchased DS7 from Staples and performed Honeycomb update from Dell. Also purchased the Dell dock at the same time. Whenever I played music, Pandora, Slacker, etc the audio would stop when placed in the dock. I called tech support and we went through all the troubleshooting steps and they determined that it was either a defective dock or DS7. I was able to further troubleshoot by taking my dock to a local staples and connect their display model to my dock while it was running slacker radio. The audio did not cut out, but continued to play without interruption. I called Dell back and they agreed to replace my unit.
I received my replacement unit today and proceeded to test the dock audio and it worked perfectly. I then was prompted to accomplish the honeycomb update (they shipped me a froyo 2.2 unit) which I accomplished. After setting up the unit, I started slacker radio and inserted the unit in the dock. And guess what....it killed the audio from the internal speakers. No matter what setting I selected, it killed the audio from the speakers when it was playing any type of audio. So after much testing, I have determined that their Honeycomb update is to blame for the docking issues.
I have also found something interesting as well. If you dock the unit, power it off, then power it on (while leaving it docked), you can start any audio program and it will play from the internal speakers without issues. The problem arises when you remove it and reinsert it into the dock.
I don't expect Dell to fix or answer this problem, but everyone should be advised that honeycomb breaks the audio dock. Only work around is to power off your unit and restart it while it is connected to the dock....someone maybe wondering why I am evening concerned, but one of the things that I was hoping would work is to have the DS7 sitting on the counter and playing holiday music while I'm working in the house. Simple enough.
Nick

I think that is built into the dock program, I have the same issue so I just plug in some computer speakers. I am going to try and edit the dock.apk
Sent from my Nexus S 4G using xda premium

Related

[Q] Samsung original car dock audio problems

I have the Samsung original car dock kit for the Note and I'm having problems with audio from phone calls not coming trough the cars speakers. Music and even system sounds go trough car speakers just fine. I already check the option in settings to use external speakers when docked. Is anyone else experiencing this problem and hopefully have a fix for it?
I'm having the same problem!
called up the samsung helpdesk NL
and they told to download a cardock app but this didn't help anything
calling back on monday to see if they can fix this
(i also came across a app that said it's not supported by samsungs own kernel.
so maybe someone made a better kernel that does support calling over the vehicle dock)
Greets
Duckie_NL
I too have this problem. I bought this thinking it would compensate for bluetooth disconnecting problems I have with my new Samsung Galaxy S2. It seems that Ice Cream Sandwich is the problem. However, having seen this dock on youtube, it seemed like the answer to all my woes. It had wired connection to the phone via the aux input and in theory should have rooted all of the audio from the phone both music player and telephone audio but like you I found to my cost that this doesn't work; telephone audio doesn't come across. I now have two Samsung products and none of these provide me with either remote or wired connection to the radio. Is there by any chance a third party rom that might cure these issues.

Nexus 7 Car Head-unit Install

Nexus 7 Head-unit Install
Hi all, long time reader, first time poster. I'm working on a Nexus 7 Car Head-unit install, and figured I would post my working through the install, hardware, software, and kinda just help all the tons of people I see out there who have the same idea, but just have no idea how to go about it.
This is ment to be half a tutorial (once everything is done) and half a brainstorming to give me idea's for things I haven't thought of or considered. I'll be coming back and updating this OP with pictures, and the build as it gets worked on.
Goals of the Install
I want to be able to run my entire car off the Nexus. I have already set up wifi tethering from my S3 to get internet into the Nexus, and thus open up a realm of possibilities. Necessary features are Nav, and Music. I rarely call from my car, but in car calling would be a nice feature to have as well. I also go out to the track ever now and again, and adding car stats (boost, RPM logging, acceleration, mapping) would be great. The biggest reason to do the install is that one the hardware is configured, you literally have a ultimately customizable setup that will take years to outdate.
The Hardware
1 x 2003 Subaru WRX
1 x Nexus 7
1 x Samsung Galaxy S3 (T-Mobile)
1 x MRX-V60 - Alpine 5-Channel Subwoofer Amplifier
1 x 7 Channel Equalizer
lots of hacked wiring
The Software
This is where I would love some feedback on on what I may be missing, better solutions to what I have suggested, and just some general awesome idea's!
Music:
Pandora, Play Music, DI.fm, Soundcloud, Radio.com
In Car Phone/Text:
Talkatak, Google Voice
OBDII Support: (Future Project)
Right now this is not a nessiacty as the hardware to do this could get very tricky. However I know I can read from the OBDII port with a bluetooth OBDII dongel and an app like Torque Lite. However I do own a tatrix cable, and am considering if it would be possible to go from the USB to the tablet, and find an app/write one what allows for the tablet to control the car in real time.
Nav:
Google Navigation, Local
Track Apps:
aLapHD
The Two Builds
There are two ways to go about this. The first would be the simple and easy way which is to hack together a charger wired to the power source of the car, and use that to keep the tablet charged. Then run a 3.5mm audio into the amp, and have sound run from there. There are a few issues with that. 1. There will be no volume control, as the Tablet's buttons will be part of the center console. I suppose I can run a controller to the amp, that will let me adjust volume. 2. This will not allow for the possibility of adding OBDII support.
The second option is to purchase a micro USB dock that does audio out. Hack it apart, and run the audio to the amp, and the power to the power. This would be necessary if I want to do a full USB ODBII connection (I believe, please tell me if I'm wrong), and would be much "cleaner" when it comes time to take the tablet out of the car for any reason (hardwire sync, parking in the "ghetto").
What I need Help with
Have any idea's. Tried something similar and have some tips. Have suggestions for apps, hardware configurations I haven't listed, or just generally want to say "sick man". Please let me know. I would love to have some people who are also interested in doing this join in on my build, and we can work together to eliminate any issues to make tablet installs easier. I will be coming back and updating this OP throughout the entire process so please look for updates!
Thanks All!
(reserved for pics)
Check out a half-DIN equalizer or crossover to solve your volume, fading, equalizing concerns... can't post a link because this is first post!
I'd like do do this in the future... I hope someone comes out with a custom set of apps that make this really cool and easy... maybe even a custom ROM.
Basically what I'd want out of this is:
Auto-on with power. Auto off after 10 minutes of no power. FM radio tuner. Maybe the ability to connect a rear-view camera (wifi?). Bluetooth OBDII would be good enough for me.
I'd also appreciate the ability to connect to at least one camera and use it as a DVR, but I think that it would probably be beyond feasibility with the Nexus 7...
What I really want to see is the ability for the Nexus to be a full Bluetooth head unit. I want it to pair with my phone for both internet (already do this, works great) and have it act as a headset essentially. This is the part that appears to not exist anywhere. The ability for the Android Tablet to act as a hands free device. I mean if a car stereo can fully integrate with your phone read your address book, start and answer calls hands free, stream music, everything from your phone then why the heck not the tablet! Someone needs to write the BT stack that can handle that. Apparently it doesn't exist for android. It exists for Windows, but not Android. That is just wrong. Are there any car stereo head units running Android as their OS? If so can someone dump their rom so we can see what all it can do for a project like this?
I really want this!
I have had mine in the dash for a couple weeks now, streaming Bluetooth to the radio which I relocated, also using NFC sticker to turn on WiFi, bluetooth , set audio volume, screen brightness and start playing music. Tasker to put unit into car mode, its sick! I'll be following, really interested to see what you come up with. My car is N 06 altima and the Nexus 7 fits almost like a glove where factory stereo use to be.
Nexus 7 in altima
sneakk said:
I have had mine in the dash for a couple weeks now, streaming Bluetooth to the radio which I relocated, also using NFC sticker to turn on WiFi, bluetooth , set audio volume, screen brightness and start playing music. Tasker to put unit into car mode, its sick! I'll be following, really interested to see what you come up with. My car is N 06 altima and the Nexus 7 fits almost like a glove where factory stereo use to be.
Click to expand...
Click to collapse
Hi!
Can you upload a picture of your install? I own a altima and I am looking to install the Nexus 7 on my dash as well. And also, did your factory stereo have bluetooth? If not, what are you streaming bluetooth to?
Thanks
Just gonna subscribe as I thought of doing something similar
Sent from my LG-E739 using Tapatalk 2
Look into this thread
http://www.mp3car.com/worklogs/152658-nexus-7-android-in-a-2001-audi-s4.html
here's a video also
http://www.youtube.com/watch?v=EdLi9wCFZ7M
timskyline86 said:
Look into this thread
http://www.mp3car.com/worklogs/152658-nexus-7-android-in-a-2001-audi-s4.html
here's a video also
http://www.youtube.com/watch?v=EdLi9wCFZ7M
Click to expand...
Click to collapse
If anyone can post on his site, tell him to connect two middle pins in usb plug, then it will start charging from the lighter socket.
Sent from my HTC Sensation Z710e using Tapatalk 2
Does anyone know of a micro USB dock/cable that then splits to power, usb, and audio? I know of one's that will do 2 of the three, but nothing that does all three. Maybe just a USB and power one, and run the audio straight out of the 3.5mm on the N7.
Amp was ordered, and will be here next week. Prelimanary fitment pics coming soon...
Hello, I'm considering permanently mounting a nexus 7 in my car. It seems like the perfect in car device.
With this in mind I have updated my CarHome Ultra app to better accommodate the Nexus 7 screen. I will be posting a new video soon showing it running on the 7.
I've looked at doing this as well, I've always been prevented by the issue of the FM radio. I use the car a lot in places where I get no or poor connection via the phone, but the radio works fine, so loosing it would not be an option as I use the FM radio quite alot.
I've been trying to figure out away to control an FM radio via the Nexus so if anyone out there has any info it would be greatly appreciated.
Jonnym
Jonnym said:
I've looked at doing this as well, I've always been prevented by the issue of the FM radio. I use the car a lot in places where I get no or poor connection via the phone, but the radio works fine, so loosing it would not be an option as I use the FM radio quite alot.
I've been trying to figure out away to control an FM radio via the Nexus so if anyone out there has any info it would be greatly appreciated.
Jonnym
Click to expand...
Click to collapse
Load a hand full of mp3s on the device. Then use Tasker to switch to switch to your favorite music player when reception is bad
Sent from my LG-E379 running ICSyndicate 2.0
I am actually currently doing a very similar project with a Nexus 7 and my Nissan 350z
I am planning on installing the Nexus 7 inside my dash (to replace sat nav dash)
HOWEVER
what about routing the power button on the tablet? Because If you cant access the power button the tablet will only get power when the car is on and if you dont use the car for a day or two the tablets battery would go flat and next time you turn on the car the tablet would go into charging mode (screen with charging battery only) and not boot up into android jelly bean.
Theres 2 potential solutions:
1. Open the tablet and wire the power button to a custom one, however on opening it I have found the button is actually a physical push press button and cannot be wired.
2. There is potential to change a file on the android system to tell the tablet to boot up when a charger is plugged in, check these threads:
http://forum.xda-developers.com/showthread.php?t=1187631
http://forum.xda-developers.com/showthread.php?t=1815131
Any updates from the OP?
Here's my install. Kept the factory radio intact, if not using the nexus, everything looks totally stock.
http://forum.xda-developers.com/showthread.php?t=1847452
regalpimpin said:
Here's my install. Kept the factory radio intact, if not using the nexus, everything looks totally stock.
http://forum.xda-developers.com/showthread.php?t=1847452
Click to expand...
Click to collapse
What OBD ll connector are you using?
tallyforeman said:
What OBD ll connector are you using?
Click to expand...
Click to collapse
xitech xr7 purchased off amazon over a year ago.
http://www.amazon.com/XiTech-ELM327...TF8&qid=1347466620&sr=1-3&keywords=xitech+xr7
Never had any problems with it.
Despite working in the car industry and loving gadgets and mod-ing...I haven't really seen what people are up to these days in terms of car mods. The Nexus 7 makes so much sense and looks great!
Hey all
Just to add to the discusion;
Radio/DAB
Frontier silicon are the only company that I can find that do an app that can control an external radio and stream it's signal to the tablet as opposed to picking up the signal over the cellular network.
App:
Their page
http://www.frontier-silicon.com/products/software/DOK_App.html
Play store
http://tinyurl.com/d24gwm4
Module:
http://www.frontier-silicon.com/products/modules/briefs/Venice6_PB.pdf
now the problem with this is, aside from building the module in somewhere' the audio out as it feeds out of the module, but I was thinking I could use some form of y split cables near to my amps 'in'.
Media storage and playback
As far as storage for everything video/audio atc and a player to match I was thinking of useing xmbc
http://xbmc.org/
andriod port;
http://forum.xda-developers.com/showthread.php?t=1813089
and pairing this with a WiFi DLNA HDD that I would wire in remoted off (say in the boot)
GPS
For improved gps I was going to use an external bluetooth gps reciver then allow mock locations on the tablet, there are also a few apps that help with this.
This app seems to have good support and a nice help page.
App:http://tinyurl.com/a9s7gvo
An example of a external GPS receiver
http://tinyurl.com/a339vu7
Hands Free
The only work round I seem to have found atm though far from perfect is this
http://www.scosche.com/consumer-tech/product/1919
it allows you to to 'cut in' the audio stream, but (can't fins the tread now will keep looking) the guy who was playing round with this was having audio issues.
not an idea solution but workable.
before my mind starts melting again;
How I plan to implement the tablet is to use tasker to wake the tablet when power is supplied then shut of down after, if I disable all kinds of connectivity when tablet shuts down then reactivates when it wakes up everything should run smoothly. Power will be cut because I'll wire in the ignition live, like you do in a stereo anyway, an this shouldn't put a drain on my battery to much, an if the dash build is good it shouldn't be too much of an issue extracting the tablet to hard boot anyway.
Volume and Audio
Volume and audio quality is another issue that needs to be addressed.
http://tinyurl.com/d2zbbnf
Seems like an ok work round.
Another way would be to install a direct in-line volume control as suggested in other threads, and put in an external DAC or hardwired EQ.
On a side note I came across this........ http://www.crutchfield.com/p_773AIRDAC/NuForce-Air-DAC-Receiver.html?tp=59282 ........ although you need to use their plug in senders but I'm sure this can be worked round with the knowledge on this forum, an would provide a very nice solution. then again there are quite a few bluetooth devices around. this probably wouldn't allow for in-line controls though.
well thats it for now, hope this helps push this forward to a working system
ben
nice build thread containing alot of theses ideas;
http://www.mp3car.com/worklogs/152658-nexus-7-android-in-a-2001-audi-s4.html

S5 bluetooth music skipping

Has anyone found an actual fix for this issue?
Clearing cache, unpairing, and resetting have not worked.
Someone please help!
This issue is driving me nuts!!!
S5 Bluetooth Potential Fix
I have an AT&T Samsung Galaxy S5 SM-G900A running Android 4.4.4 KitKat, and the bluetooth audio has been skipping constantly when it is paired with my car stereo. This issue has driven me absolutely crazy for months. I've literally come close to throwing my phone out the window.
I first thought it was an issue with buffering when streaming from Google Play since those files are all high-quality 320 kbps, but then I realized playing music directly off of my phone also skipped. Next, I thought it might have been the bluetooth receiver in my stock 2012 Toyota Tacoma radio, so I even upgraded my radio to a Pioneer FH-X720BT.
I've been searching and searching online forums for an answer but no luck yet. I also thought it might've been an issue with Android 4.4.2 and was anxiously anticipating AT&T coming out with a software update in the US. Well, it finally came yesterday and guess what? Bluetooth audio has STILL been skipping.
I figured it had to be something else like CPU availability -- like my phone just didn't have the oomph to stream audio via bluetooth. I downloaded the free GSam Battery Monitor from the app store to see what was using my phone's CPU the most. Once it was downloaded, I went to "App Usage" and then under the top menu "View CPU Minutes Used." I thought it was weird that my Alarm Clock Xtreme app was at the top along with Android System, Kernel (Android OS), and the Intellicast weather app. I uninstalled the Alarm Clock and Intellicast apps and so far the frequency of skips is much lower -- 4 whole songs with no skips on my drive home. Not sure if this will work for you, but try disabling or uninstalling apps that use the CPU the most.
Android should really come out with a better solution for this issue instead of me having to figure out which third-party apps (that I frequently use, btw) that I have to get rid of. I listen to music all the time from my phone via bluetooth, and I am almost frustrated enough to go back to the dreaded iPhone (at least its freaking bluetooth works seamlessly). You'd think there would be some kind of CPU task management prioritization that would put Bluetooth Sharing at the VERY TOP (sort of like task manager in Windows where you can increase/decrease CPU priority). Anyone else got any better ideas? I've considered rooting, but I'm stuck with stock since it's an AT&T phone. If only complex technologies would just WORK..
I was having skipping on both Bluetooth and via aux cable, although I primarily use aux. After much trouble shooting, I finally reflashed from scratch and haven't had the problem since...aux or the limited Bluetooth I use. Of course I'm rooted and thought it must have been something I screwed up, but my phone acted a little screwy even before I ever rooted.
Yeah, this issue has driven me absolutely crazy since I upgraded back in May from my S3, which never had this problem in the slightest. I've tried everything I can think of short of a fresh install from absolute scratch. I'm on unrooted stock (4.4.2 at the moment - 4.4.4 has failed to update the couple times I've tried today). I've been hoping AT&T would get Lollipop rolled out and that it would somehow help whatever annoying glitch is causing this issue, but the fact that 4.4.4 only JUST pushed out from them makes me doubt AT&T will get Lollipop out in any sane amount of time.
I've tried settings in apps like Poweramp for it to use highest priority, but that makes no difference. This is such a basic thing to be so screwed up. I've watched process monitors while it does it, and there's no obvious reason for it. CPU usage seems fine while it's glitching. Nothing is consistently showing in the log when it's happening. I have essentially given up hope of every figuring out what is causing this.
When (if) Lollipop rolls out from AT&T for the S5, I'll see if that upgrade somehow finally helps fix this glitch (assuming that upgrade doesn't keep failing like the 4.4.4 one does). If not, I'll do a fresh install. And if I'm doing that, I'll probably do a custom ROM if I'm gonna go through all that effort...
Bluetooth Audio Buzzing Noise on Pioneer Stereo
So I contacted Pioneer, Samsung, and Crutchfield regarding the issue of bluetooth audio skipping and/or making an extremely loud buzzing noise for 3-5 seconds while streaming from my Galaxy S5.
Pioneer alluded to requiring the ground cable needing to be directly grounded the chassis instead of the factory ground wire. This really didn't make sense because this issue only persists when playing via bluetooth -- not USB, radio, Aux, etc. Plus, the factory ground wire IS connected to the frame anyway, and Crutchfield, BestBuy, and local car audio installers all said they would ground it to the black factory ground wire.
Tonight, Samsung said that this was a known issue, but only related to Pioneer radios. I ended up finding a bluetooth firmware upgrade to my radio on Pioneer's website. My current Bluetooth Version listed on the head unit display is A820, and the firmware update is for A860. Samsung said this should resolve my issue, so I'm going to give it a shot. They also said that the Android Lollipop 5.0 update from AT&T would address this known issue. I saw on another android forum that AT&T reported the update will be release in February this year, but they didn't have a specific date.
If this doesn't work, I'll try putting my phone in Safe Mode and stream audio over bluetooth. If that fixes the issue, then I'll have to painstakingly narrow it down to one or more 3rd-party apps. Typically, I force stop all 3rd-party background processes and only run GSam Battery Monitor, Clean Master, Twilight, and Nova Launcher.
Bluetooth Audio Buzzing Noise on Pioneer Stereo
So I finally put my S5 in safe mode to rule out 3rd party apps, and the Pioneer HU still did that weird, intermittent buzz glitch for about 1 second. The same thing happened today when streaming from my iPad, so now it seems like the android bluetooth wasn't the culprit after all.. I think it must be the cheap SocBlue Bluetooth module Pioneer puts in their radios. Several reports on other forums point out these on-going issues with Pioneer. Sound quality is great for radio or CD, but I warn you: DO NOT buy a Pioneer car stereo if you plan on frequently using a Bluetooth audio connection. I contacted Crutchfield tonight and will be swapping out the Pioneer FH-X720BT for a Kenwood DPX500BT. Hopefully this is the last time I'll have to deal with this kind of issue.
I did this with my iPhone and it worked!!!
Goto settings > bluetooth
press the little info icon on the right side of the FH-X720 or FHX-820BS paired device tile
This will open up a settings view.
Turn Off the Sync Contact feature

[Q] USB Audio Stream Pops & Clicks

Hi All,
I have an AT&T Nexus 6 and I am trying to stream USB audio out to my car stereo. When doing so I am hearing clicking and popping in the audio. I thought it was possibly a ROM/kernel issue but I am fully back to stock & locked and the problem still exists. Audio via mini stereo jack (aux) works fine of course, as does sound coming out of the phone's speakers, headphones, etc. I have tested 2 other android devices (Nexus 4 and Samsung Nexus 10) and USB audio is working perfectly fine in my car.
If anyone has any guidance on how to troubleshoot this it would be great. This is strange to me as USB audio out was added as a software update, so I find it very odd that it works on my older devices and but not the N6. If I can't get this figured out I will have to schedule an appointment at an AT&T warranty center to likely exchange my 35-day-old phone for a fecking refurb
Thanks for any help guys, cheers!
I RMA'd my Nexus 6 and the replacement behaves the exact same way. Other non-Nexus 6 devices tested work just fine.
Has anyone actually used streaming USB audio other than me?
rbross3030 said:
I RMA'd my Nexus 6 and the replacement behaves the exact same way. Other non-Nexus 6 devices tested work just fine.
Has anyone actually used streaming USB audio other than me?
Click to expand...
Click to collapse
What app are you using to stream? I tried, but do t know if my radio wont accept it or not. I know I can't read movies from my phone or flash drive.
Sent from my Nexus 6
Casper34 said:
What app are you using to stream? I tried, but do t know if my radio wont accept it or not. I know I can't read movies from my phone or flash drive.
Click to expand...
Click to collapse
The idea behind USB audio streaming is that you don't need to use an app. The device streams any and all audio out of the phone via USB rather than out of the speakers. This means that you can use Spotify, Youtube, Pandora, PlayerPro, etc. while connected to your car stereo via USB and have the audio in your phone played through your car speakers in lossless digital. This is a feature that was introduced in Android 4.4 but seemingly is saught out by nobody but me.
Prior to USB audio out, these were common options/solutions, all with drawbacks:
1. Plug into the headphone jack which is an analog signal prone to noise, interference, and muddy EQ.
2. Plug into USB and Android will automatically mount your phones sdcard partition the same way as USB thumb drive. This only works for playing media files that are saved directly to the phone. All other sounds/apps do not work through as the phone's audio hardware is not being used. This means no Pandora, Spotify, etc. and no controlling music from the phone. Casper, your radio is probably trying to mount your N6 this way – most car stereos do and are not expecting have a device connected that is outputting its own hardware-driven digital audio stream.
3. Bluetooth. This was the best solution as it uses the phones audio hardware and thus all audio is output the same way as the new USB out feature. The drawback to this is that bluetooth uses lossy-compression and so is lower fidelity than option #2, though A2DP has made quality far better than it once was.
If you can't already tell, I'm sort of a fidelity nazi and this is why I'm so desperate to find a solution to this issue at hand with the Nexus 6 USB audio out that noone seems to know exists.
Any update on this? I just got my Project Fi Nexus 6 and I am regretting not doing more research on the USB streaming in the car. The iPhone 6 worked flawlessly and I could change songs with my car (I just lacked good service). The car usb won't even recognize my google play albums downloaded to my phone BUT it will pull up my zedge ringtones. Every time I try to fool around with it, it just keeps looping my Mario ringtone through my car speakers lol. But seriously, any suggestions. I am so desperate.
ericajm85 said:
Any update on this? I just got my Project Fi Nexus 6 and I am regretting not doing more research on the USB streaming in the car. The iPhone 6 worked flawlessly and I could change songs with my car (I just lacked good service). The car usb won't even recognize my google play albums downloaded to my phone BUT it will pull up my zedge ringtones. Every time I try to fool around with it, it just keeps looping my Mario ringtone through my car speakers lol. But seriously, any suggestions. I am so desperate.
Click to expand...
Click to collapse
I gave up and went with using bluetooth. Cost me another $120 in bull**** hardware that Grom Audio sells to make this "upgrade" possible. Quality is **** compared to what it could've been as well... sigh... first world problems
I have a Grom USB2 and a Galaxy S4 that I just upgraded from 4.4.1 to 5.0.1 (Goldeneye ROM). I successfully streamed USB with KitKat (Grom has a configure file that enables their unit to do this) but have been unable to do the same thing with Lollipop. I did the *#0808# thing and tried several settings but nothing has worked. Any ideas?

Kenwood DDX9902S Ordered

I ordered the Kenwood DDX9902S the other day, should arrived on the 28th and I will install on the weekend.
Going to install in my 2014 Mazda CX-5 Touring with Bose system.
I chose the DDX9902S over the DDX9702S because it's only $50 more and has 2 more bands of EQ and 2 years of warranty vs 1, and some other stuff.
I chose it over the Pioneer AVIC-4100NEX because it can do the screen mirroring and control the Phone from the touchscreen. (Though the damn Nexus 6 doesn't support video out damn it).
It is too bad the Kenwood only has 1 USB input though, and the Pioneer has TWO and also has an SD card slot. Does a USB hub work?
I'll have to do some creative wiring so I can swap out cables for card reader/etc if I want to view movies and such. The Kenwood can playback mkv files, didn't look up if the Pioneer can.
Ordered it from Crutchfield, $749 + $79 for the steering wheel control/wiring harness, free antenna and dash kit. Since it's so new, it's the same price elsewhere on the internet.
The Crutchfield Mastersheet is stupid. It only shows you how to take out factory audio unit and speakers, nothing about wiring at all. If buying stuff is cheaper elsewhere, do it.
Going to wire up my factory rear view camera to the Kenwood, from the Mazda forums, someone detailed how to do it. Got the items today and will get it prepared for next weekend to install by myself. I'll report back, I might also do a YouTube video since this unit is so new and no one has it.
What phone are u currently using???
cerobles1 said:
What phone are u currently using???
Click to expand...
Click to collapse
Nexus 6
nxt said:
it can do the screen mirroring and control the Phone from the touchscreen. (Though the damn Nexus 6 doesn't support video out damn it).
It is too bad the Kenwood only has 1 USB input though, and the Pioneer has TWO and also has an SD card slot. Does a USB hub work?
Click to expand...
Click to collapse
So you expect to mirror, instead of running Android Auto ?
Pioneer is limited in what it can do on each port. I think iPhone/iPod goes to port 2 while firmware updates and Android Auto are port 1.
In theory, anywhere a phone works, a phone plugged into a USB hub should work. But don't underestimate the need to get a quality hub and cables for reliable connections.
I have no idea if the Kenwood supports flash or other USB stuff besides a phone, and at the same time a phone is connected.
mikereidis said:
So you expect to mirror, instead of running Android Auto ?
Pioneer is limited in what it can do on each port. I think iPhone/iPod goes to port 2 while firmware updates and Android Auto are port 1.
In theory, anywhere a phone works, a phone plugged into a USB hub should work. But don't underestimate the need to get a quality hub and cables for reliable connections.
I have no idea if the Kenwood supports flash or other USB stuff besides a phone, and at the same time a phone is connected.
Click to expand...
Click to collapse
No, I will use Android Auto but would like to check out the screen mirroring too, for apps that don't support Auto / 'appradio' yet.
I've downloaded the manual and the Kenwood does support movies and music on a USB flash drive, but no mention of hubs or simultaneously connected to phone.
I just installed the DDX9702s over the weekend. It's a pretty good unit, Android Auto works flawlessly with my Sony Z3, and the external GPS makes it super accurate. Kenwood's interface is so freaking ugly though
Android Auto is also incredibly finicky on my wife's OnePlus with CyanogenMod. I flashed to 12.1 nightlies hoping to resolve some of the issues but it's no better.
The iDatalink Maestro was also fun to install, it requires taping some wires on your ODBII port. My tip there is grab a right-angle generic ODBII to Serial cable on Amazon/Ebay for $10 then cut it up and splice it into the iDatalink Meastro harness. That way you can just plug it in rather than t-taping or hard-wiring the maestro cable to your car. You can also re-pin the ODBII port as well, but splicing an extra ODBII cable seemed like the best option if I ever want to go back to stock.
jonowar said:
Android Auto is also incredibly finicky on my wife's OnePlus with CyanogenMod. I flashed to 12.1 nightlies hoping to resolve some of the issues but it's no better.
Click to expand...
Click to collapse
Doesn't start or what ? Sometimes enabling/disabling USB debugging can help with getting a phone connected.
I saw the news about 1+2 not having NFC. It appears NFC is required to trigger Android Auto over Wifi connections, so that could be an issue for the new 1+2.
mikereidis said:
Doesn't start or what ? Sometimes enabling/disabling USB debugging can help with getting a phone connected.
I saw the news about 1+2 not having NFC. It appears NFC is required to trigger Android Auto over Wifi connections, so that could be an issue for the new 1+2.
Click to expand...
Click to collapse
Yea, it won't start unless I "forget all cars" and go through the acceptance dance again then most of the time it freezes or just shows a blank black screen. I can't believe how much difference the Sony Z3 is, it works flawlessly every time.
jonowar said:
Yea, it won't start unless I "forget all cars" and go through the acceptance dance again then most of the time it freezes or just shows a blank black screen. I can't believe how much difference the Sony Z3 is, it works flawlessly every time.
Click to expand...
Click to collapse
It MIGHT be due to bad USB connections; maybe the USB port isn't tight.
Android Auto tends to freak out if USB isn't a perfect connection.
mikereidis said:
It MIGHT be due to bad USB connections; maybe the USB port isn't tight.
Android Auto tends to freak out if USB isn't a perfect connection.
Click to expand...
Click to collapse
I'm using the same cable for my Sony though, which means it's the port on the OPO which is only a few months old
I'll give it a shot with the official OPO cable just to make sure.
I guess it's time for USB C.
jonowar said:
I'm using the same cable for my Sony though, which means it's the port on the OPO which is only a few months old
I'll give it a shot with the official OPO cable just to make sure.
I guess it's time for USB C.
Click to expand...
Click to collapse
I'm not saying that it IS the port, just that it's a possibility.
I have about 15 test devices and I don't think any ports are bad, even after years of use.
I DO have cheap USB cables that are pretty bad though.
Trying other cables is the best idea I have, besides wiggling the cable a bit to see if Android Auto stops.
mikereidis said:
I'm not saying that it IS the port, just that it's a possibility.
I have about 15 test devices and I don't think any ports are bad, even after years of use.
I DO have cheap USB cables that are pretty bad though.
Trying other cables is the best idea I have, besides wiggling the cable a bit to see if Android Auto stops.
Click to expand...
Click to collapse
Hey, you were right! The OPO cable works perfectly! Thanks for the tip.
Have the same unit... Love it, look on the Kenwood website, there is a firmware upgrade for our units
Frankenberrie said:
Have the same unit... Love it, look on the Kenwood website, there is a firmware upgrade for our units
Click to expand...
Click to collapse
Awesome! thanks for the heads up, 100mb.
It says to do a reset after, is that necessary, kenwood has a ton of settings.
nxt, been eagerly waiting for your DDX9902S in depth review. Did I miss it? If so, please point me in the right direction. If not, I'd love to hear your thoughts now that you've been using it for a few months, especially if you've had a chance to compare it to the 4100NEX and from an Android perspective (mirroring vs Auto). Thanks
Frankenberrie said:
Have the same unit... Love it, look on the Kenwood website, there is a firmware upgrade for our units
Click to expand...
Click to collapse
senseimike said:
nxt, been eagerly waiting for your DDX9902S in depth review. Did I miss it? If so, please point me in the right direction. If not, I'd love to hear your thoughts now that you've been using it for a few months, especially if you've had a chance to compare it to the 4100NEX and from an Android perspective (mirroring vs Auto). Thanks
Click to expand...
Click to collapse
I wrote a pretty long review on Crutchfield but ran out of space. I ended up not making a video review because... it's not that great.
Just like any head unit, the regular UI for radio/settings/menus/audio/etc is ugly.
Anyways, here's some info going from the HU itself then Android Auto.
The Kenwood only has 1 USB. It charges your phone very very slowly, but it can charge it to 100% if you keep it connected long enough even while using Android Auto. (I do 6-7hour drives every other weekend).
1 USB, so 1 USB device connected and that's it. The Pioneers have a dedicated SD card slot, you can store music on it and leave it in there forever.
Putting about 64GB of music on a USB 3.0 Flash drive, the Kenwood took a very long time to get complete ID3 tags. So I'm forced to listen to Adele when it starts up, or manually choosing another folder before I can shuffle ALL songs.
The Kenwood supports various file formats, it can even play video files! Too bad all the .MKV files I have, no audio is decoded.
Bluetooth audio. Very little lag, steering wheel control to skip tracks almost instantly changes the tracks. My stock HU there was 2-3 second delay. ID3 tags show up properly. I primarily use Google Play Music app. I mostly use Android Auto mode when using to music though.
Bluetooth Phone. Works fine, I have a 2014 Mazda CX-5, I put the microphone where the stock microphone was. People can hear me perfectly. Android Auto voice commands have no issues hearing me either.
I have a Nexus 6 and when it was on 5.x.x, the Bluetooth Phonebook on the headunit would be SCREWED UP. No names, and just a ton of phone numbers. I installed Android 6.0 that was released a few days ago and Contacts information show up perfectly.
The Kenwood's backup camera input works really well. I can turn on the car and as the Kenwood is still booting up, if I put the car in reverse, the backup camera would be displayed! I'm pretty surprised with this and love it. The Kenwood takes a while to boot up.
The Kenwood, like most high end HUs have a TON of audio settings. I'm no car stereo buff so I mostly leave everything at default since I don't know half of what the settings mean. Each audio input has it's own audio setting which is great. My car has the factory Bose system and it sounds even better with the Kenwood.
The Kenwood has built in iHeartRadio/Pandora/Aupeo! "apps" that's supposed to work with your phone. It's junk, I've given up trying to make that work and just do regular Bluetooth Streaming.
Kenwood also has a SmartPhone control mode where if you can get your phone to video output into the Kenwood's HDMI or AV input, you can load the Kenwood App, and control your phone from the Kenwood's touchscreen, so you can use Waze or other apps directly. The app sucks and doesn't get my touches correctly. Don't rely on it, it's not reliable.
So yeah it has 1 HDMI input you can use with your iPhone using video adapter, or Android or whatever else.
It has DVD slot for movies/audio cds, I've never used it.
HD Radio. The radio interface really sucks, but it works. The way to change an HD station from HD1 to HD2 is really dumb and annoying. it has 3 different "seek" modes when you press the >> or << button. Seek1 auto scans to the next station that it can grab. Seek2 is manual seek. Then there's Auto where it changes to your next Preset.
Then there's the CHup and CHdown buttons. So if you're locked into an HD station and you want to change to HD2 you press the CHup or CHdown button, but that only works if you're in Seek2 (or maybe Seek1, I forgot), if you're not, all it does is the same as >> or <<. It makes no sense because CHup and CHdown acts EXACTLY like the >> and << buttons.
I have a ZuneHD with a special car aux box for it, I use it in AV1, works and sounds fine but when I put it into video mode I get a lot of interference. Not sure if it's the Kenwood or my aux box for it.
The Kenwood's video controls suck too. It's just hard to adjust and get proper color/brightness/etc.
At night, it's too bright, and lowering Brightness and "Blackness" levels, it gets hard to see/read the screen. So to make things clearly readable, screen has to be a little bright. There is a way to set holding Menu button and the screen will turn off until you press screen or a button.
OK Android Auto, I won't talk about Android Auto itself, there's many reviews and videos about it. I'll talk about how well it works with the Kenwood.
When it works it's great, but it's a coin toss if it'll work great on this drive, or the next.
Plug in USB cable to the phone and you're prompted to press OK on a warning screen on the Kenwood. The Apps icon turns into Android Auto.
Again, when it works, it works. Here's when it doesn't:
On my road trips, I would get into car, search the destination, and start navigation.
About 5 minutes later, Android Auto on the Kenwood would shut off and you're taken back to the main menu and the Apps icon return. Phone's Android Auto app is shutdown. There's no way to relaunch Android Auto without unplugging the USB and plugging it back in. On my last road trip, I did this about 4-5 times, then I decided to start Play Music while navigating, then it worked and had no issues. On my drive home, I started music right away with navigation and it still shutdown every few minutes. Unplugging and plugging back a few more times then it worked with no issues. It's completely random.
On my drive to work and back home, I drive through some low cell signal areas. When my phone looses signal and then catches signal back, Android Auto's screen would BLINK. Navigation wouldn't stop, music wouldn't stop, the screen would just BLINK. It's distracting.
Phone calls go through Bluetooth still, but it works well from the Android Auto screen. I'm sort of impressed how it works.
It's possible to listen to another audio source (HD Radio, CD, etc) while in Android Auto navigation, just press menu button, pick your source, then go back to Android Auto.
Android Auto I believe needs a lot of work. It's still in its infancy and the missing features and odd limitations Google has with it frustrates and confuses me.
Kenwood released a firmware update 9/17/2015.
Changelog is: Changed the specification of Volume function. Improved stability.
I hadn't noticed any improved stability.
That's all for now. Ask your questions and I'll try to answer them.
About Mirroring vs. Android Auto.
My Nexus 6 unfortunately does not support video out. I'm pretty pissed. The new Nexus 6P won't either, damn it Google!
So what I did to test was to hook up a Chromecast to the Kenwood's HDMI input.
Then I would set up my phone to be a hotspot, the Chromecast would connect to it, then I was Cast my Phone's screen to the Chromecast. Totally going in a circle LOL. (This will eat up your cell data FYI).
But it does work and my screen shows up on the Kenwood's screen.
The issue is the Kenwood's SmartPhone Control app like I mentioned in the above post.
It does not sync up properly so my touches on the Kenwood's screen, does not touch the right area of my Phone's screen.
I've never used the Pioneer 4100 so unfortunately I can't compare.
I believe that having TWO USB ports on the Pioneer and a dedicated SD card slot is BIG!
It's so annoying swapping out my Phone with a USB Flash drive.
If I were to do it again, I would probably get the Pioneer because of the TWO USB and SD card slot.
I chose the Kenwood because of the higher audio capability (EQ) and the App Mirroring (which sucks now that I've tried it), also it was cheaper than the comparable Pioneer high end model.
Hello, I ordered a DDX9702S and installed it in my '09 Civic Si. I've got a Nexus 6P and have been experiencing odd audio glitches, and I was wondering if you could test something for me.
When I play music, everything is fine until I get an audible notification or use the Voice Search. After that there is an audible buzzing/frying noise in the tweeters of my stereo when a bassy note hits. Once the noise starts, it doesn't stop until I reboot my head unit. Could you see if you have the same problem? I don't know whether it's Android Auto in general, my Kenwood stereo, or what. I've also reproduced the issue with 2 other Nexus 6P's and a Nexus 5, so I know it's not just my phone or model. I know yours is a different model, but it's worth a try to see if it's just me.
Steps to reproduce:
App to use:
Either Google Play Music All Access or Spotify
Song to use:
Rearrange by Vérité - the beginning of the song is quiet with a bassy beat, making it easy to spot the distortion / static.
Steps:
Turn on the head unit and plug in your phone (I used a Nexus 6P and a Nexus 5)
Once Android Auto is running, go to your music app and play Rearrange by Vérité. I find its easier to play the song if you add it to a playlist titled "1" (without the quotes) first, so it's at the top of your playlists.
You'll notice that the beginning of the song is quiet with a bassy beat. After about 10 seconds, hit the microphone in the top right of the screen to activate the Google Now Voice feature. Once it gives an audible beep, hit the microphone button again to cancel.
Hit back on the screen to start the song over. At this point, on my stereo, every bassy beat is accompanied by a static in the tweeters of my stereo. This happens on every song I play, even the radio, but it's much easier to hear on quiet songs like the one I gave as a suggestion to test with.
The static continues even if you disconnect/reconnect the phone. The only think that stops it is restarting the head unit by turning it off and back on. If you use Google Now again or a notification comes in and makes an audible sound, the static will come back. It seems, to me, that any notifications or audio playback from an Android device will cause the head unit to distort the sound until the head unit is rebooted. If nothing happens to cause the distortion, sound quality is stellar.
Hope you're able to test this, and thanks in advance!
DDX9702S
Sent from my Nexus 6P using XDA-Developers mobile app

Categories

Resources