Database Develop

Which ROM is the best for XDA 2i???

Hi all,
I wonder which ROM is best for my XDA 2i?I use the Modified ROM V.1.11.00 WWE- Radio 1.03.00-ExtROM 1.11.162.However,the signal is not stable;I can't connect to GPRS as well(Im using O2 UK PAYG).

Re: ROM Upgrade
Hi, I've been looking into which is the best ROM, I was thinking of swapping to the I-mate PDA2 ROM. But the general feeling is the modified 02 with Radio 1.03. This is what I have put on mine and I'm on PayT vodafone UK, my GPRS worked fine after I installed the attached file. :lol:
Unless your loaded a word of warning Vodafone charge £7.50 for a 1Mb download of data on PayT!!!!!!!! I found this out after I had subscribed to TomTom Traffic on TTN 5.1, waste of my money now, GPRS too expensive, looking at other PayT deals ie. T-Mobile +£2.60 per Mb, although still too expensive. :x
Copy to XDA IIi. Access the copied file on your XDA IIi , click on it to run and it will install all the UK settings for Vodafone. Please keep a copy, as the install deletes itsself automatically. :twisted:

Re: 02 PAYT Settings!
Sorry was half asleep when I wrote my original replay, which refers to vodafone not 02, please find the correct file for 02 PAYT attached.

are these the settings for the free GPRS on PAYT on O2 ?
or have they realised their error yet ?

hello,
i've been looking everywhere for the 02 paymonthly gprs settings, i tried the pay as you go settings, but it didnt seem to work.
i was on the phone to 02 for hours last time until we got it to sort of half work, but i had to hard reset when i updated my rom. i installed with corporate user, and now i dont have gprs settings again. anyone know how to do it?
much much appreciated!
haider

How do you work with CAB files? Just double-click like an executable? What does this update to the GPRS do?? Will it affect my WiFI settings?

blueclue7 said:
How do you work with CAB files? Just double-click like an executable? What does this update to the GPRS do?? Will it affect my WiFI settings?
Click to expand...
Click to collapse
the cab files will only modify/add settings into your registry. it will not affect your wifi settings

haider said:
hello,
i've been looking everywhere for the 02 paymonthly gprs settings, i tried the pay as you go settings, but it didnt seem to work.
i was on the phone to 02 for hours last time until we got it to sort of half work, but i had to hard reset when i updated my rom. i installed with corporate user, and now i dont have gprs settings again. anyone know how to do it?
much much appreciated!
haider
Click to expand...
Click to collapse
Start>Settings>Connections>Connections
set up O2 mobile web
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Under My ISP select "Add a new modem connection"
Enter O2 Mobile Web as the name and select Cellular Line (GPRS)
next button
Access point name: mobile.o2.co.uk
next button
User name: username
Password: password
Advanced Button
Use server-assigned IP address
NO software compression
NO header compression
Servers tab
Use specific server address
DNS 193.113.200.200
Alt DNS 193.113.200.201
OK button (top right of screen)
Finish button
OK Button (Top right)
Set Up O2 WAP
On the connections screen under "My Work Network"
Add a new modem connection
Enter O2 WAP as the name and select Cellular Line (GPRS)
Next
Access Point Name: wap.o2.co.uk
Next
User Name: user
Password: password
Finish
Screens Grabbed With Pocket Screen Capture 1.0

Again, do I simply double-click the CAB file to install the "registry" (if that is what happens)? And specifically, what will this O2_UK_PAYG file do to my settings? If I add something like the TMobile caller ID patch (another CAB file), how will that affect the general O2 settings of my XDA unit (I am a TMobile customer running under the O2 ROM)?

blueclue7 said:
Again, do I simply double-click the CAB file to install the "registry" (if that is what happens)? And specifically, what will this O2_UK_PAYG file do to my settings? If I add something like the TMobile caller ID patch (another CAB file), how will that affect the general O2 settings of my XDA unit (I am a TMobile customer running under the O2 ROM)?
Click to expand...
Click to collapse
To run a CAB file just find it with File Explorer and click it. It will automatically be deleted afterwards
Your new settings should either overwrite the old ones or add an addition set of network settings that you then select as the defaults.

Thanks man, i really really really appreciate it. must have been long! you didnt have to include pictures!
Thanks again anyway. i really do appreciate it.

haider said:
Thanks man, i really really really appreciate it. must have been long! you didnt have to include pictures!
Thanks again anyway. i really do appreciate it.
Click to expand...
Click to collapse
No worries chap, any more problems just shout!
As for the pictures etc, I would sooner do it properly once and refer people who ask in the future to there, than end up doing it over and over....

RE: 02 PAYT Cab file or Vodafone PAYt
To run the cab files, copy to your PDA and double click to run. These cabs just update the registry, it doesn't matter. As long as your PDA is SIM-Free, any carrier should work.
They are the official files from the IMATE website, which has cabs for most carriers including worldwide. You can only download these files from IMATE website if you have a registered device. They should work on all XDA or other brand names etc. :twisted:

RE: Other Operater cabs
I have uploaded the rest of the available cabs for the UK carriers, contact and PAYT. So in combination with my earlier uploads, these are all the UK carrier settings for the UK
There are cabs for other countries and carriers available, let me know your carrier, contract (PAYT or Contract) And I will try to locate the correct cab file.
These are the offical cabs from IMATE. They only update your registry and nothing else. Copy to your PDA and click to run.

just one other thing, once the gprs connects, its stays on? how do u disconnect it - save battery? it used to end connection once mms was d/l or u/l and there was an option to disconnect when pressing on G icon?
small detail cos i can always soft reset or activate wireless, but would be handy, thanks again!

MaskedMarauder said:
blueclue7 said:
Again, do I simply double-click the CAB file to install the "registry" (if that is what happens)? And specifically, what will this O2_UK_PAYG file do to my settings? If I add something like the TMobile caller ID patch (another CAB file), how will that affect the general O2 settings of my XDA unit (I am a TMobile customer running under the O2 ROM)?
Click to expand...
Click to collapse
To run a CAB file just find it with File Explorer and click it. It will automatically be deleted afterwards
Your new settings should either overwrite the old ones or add an addition set of network settings that you then select as the defaults.
Click to expand...
Click to collapse
If you are a T-mobile cstomer,then I suggest you use the T-Mobile file I have uploaded, it is for T-Mobile contract users. It doesn't matter what ROM you have, it only sets up the gprs and wap settings, by writing to the registry on PDA.

haider said:
just one other thing, once the gprs connects, its stays on? how do u disconnect it - save battery? it used to end connection once mms was d/l or u/l and there was an option to disconnect when pressing on G icon?
small detail cos i can always soft reset or activate wireless, but would be handy, thanks again!
Click to expand...
Click to collapse
I just open 'Wireless Manager', if the GPRS is connected then the icon will be green, tap the icon to disconnect. :twisted:

yeah, thanks i did realise afterwards. i think i'm just acting a bit spoilt. although i still have a few more bugs in the phone... (multiple copies of my messages are being sent out).
thanks everyone.

Cab install Splash Screen Bonus!
Hi, all
I have had a look at the carrier cab installs, I uploaded and found out that you can change your splash screen with these cabs as well.
XDA IIi installation
Go to this link for instructions on how to create the 2 files you will need.
http://pocketpcdubai.infopop.cc/groupee/forums/a/tpc/f/582600994/m/138105069
They have the Windows program for conversion and some example jpg's or create your own Splash screen. This program runs on your PC.
In the program save your chosen jpg as twice as system1.nb and then repeat with same jpg and save as system2.nb.
Copy these files to your PDA Windows directory. Then copy the correct carrier cab file (listed earlier), click to run, it will then install/re-install your GPRS and WAP settings and update your splash screen, it will probably freeze, then do a soft reset and voila you will see your new splash screen. To change just repeat the process and overwrite your 2 files in windows directory with your new ones and use the cab again.
**Please note the GPRS cab files will only update your splash screen if you have copied the correct files to the windows directory on your pda.
If you do not want to change your splash screen, then simply run the cab file without copying/creating system1 or system2, and this will just install your chosen carrier internet settings etc**
One more thing I mentioned in an eariler post that the cabs update your GPRS and WAP, well they also install your MMS settings as well.
Enjoy :twisted:

Splash install update
Sorry made a mistake on the save files not system1.nb/system2.nb.
The correct file names are splash1.nb and splash2.nb. :wink:

Blue Angel - Enable Phone Band Tab - WM5 - How?

I've played around with CAB files and registry settings in an attempt to enable a Band tab in the Phone's settings screen with the aim of switching GSM network bands, but have not been able to get it working. Others have attempted similar things in the past (http://forum.xda-developers.com/showthread.php?t=267793), and also had little success.
I'll list what I've learned in the process of trying, just in case it helps anyone else, or in case someone who knows more can reveal what's required to enable the Band Tab in WM5 to allow selection between GSM network frequencies (ie. not UMTS, or TD-CDMA or anything else). Specifically, I'd like to be able to select between the four bands that the Blue Angel supports: 900 / 1800 / 850 / 1900 MHz
WM 2003SE
In WM 2003SE, it was possible to enable the Band page if the appropriate version of two files, PhonePH.dll and RILGSM.dll was set. The attached cab file allows this to be installed on WM2003SE phones.
This file includes a registry file with settings similar to those listed below. The following is an example of a REG file which allows the customisation of this Phone->Settings->Band tab. Note that I've included 7 different values, but a maximum of 5 can be included. The ItemCount value sets the number of items displayed. (I include the other values for reference incase you wish to change /swap the first 5 values)
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhonePH]
"ItemValue4"=dword:00000000
"ItemName4"="Reset Value to zero"
"ItemValue3"=dword:00000003
"ItemName3"="GSM 900 / 1800 (Europe/Asia)"
"ItemValue2"=dword:00000005
"ItemName2"="GSM 850 / 1900 (North America)"
"ItemValue1"=dword:00000007
"ItemName1"="Automatic"
"ItemCount"=dword:00000005
"ShowBandPage"=dword:00000001
"ItemName5"="GSM 900 / 1800"
"ItemValue5"=dword:00000003
"ItemName6"="GSM 1900"
"ItemValue6"=dword:00000004
"ItemName7"="GSM 1800"
"ItemValue7"=dword:00000002
[HKEY_CLASSES_ROOT\CLSID\{2C51FDE9-39A0-4df7-8C59-9A41EE060497}]
@="Test Property Page Extensions"
[HKEY_CLASSES_ROOT\CLSID\{2C51FDE9-39A0-4df7-8C59-9A41EE060497}\InProcServer32]
"ThreadingModel"="Apartment"
@="phoneph.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Shell Extensions\Approved]
"{2C51FDE9-39A0-4df7-8C59-9A41EE060497}"="Test Property Page Extensions"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Extensions\Controls Folder\Phone\shellex\PropertySheetHandlers\{2C51FDE9-39A0-4df7-8C59-9A41EE060497}]
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Index"=dword:00000001
"Order"=dword:00000003
"Prefix"="RIL"
"Dll"="rilgsm.dll"
Note the relationship above between phoneph.dll and the Phone Property Pages.
Windows Mobile 5
Unfortunately on WM5, running this CAB won't work, and in fact, it will disable your phone. After much testing, I discovered that this was because it installed the WM2003SE version of the RILGSM.dll file, which doesn't seem to work on WM5. This value is set in the following key: HKLM\Drivers\BuiltIn\RIL\ -> Dll="Rilgsm.dll"
Swapping this with a new file (eg. the one from WM2003, then referencing this new file in the registry, followed by a soft reset) will result in the phone not being available. The message "A wireless radio must be attached to use the phone." will appear when attempting any phone operations in this case.
Most phone settings in WM5 seem to be in the HKLM\SOFTWARE\OEM\PhoneSetting key. However, trying the ShowBandPage value didn't work. It is possible to enable a band selection page, for switching between a UTMS and GSM network, but this is pointless on a Blue Angel (XDA IIs), as it doesn't support UTMS anyway.
Here is an example of a registry (.reg) file for enabling the UTMS band page (along with some extra options that I've aggregated):
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting]
"ShowPIN2Page"=dword:00000001
"ONSDisplayRule"=dword:00000001
"Enable3GLongNamePrefix"=dword:00000000
"LongNamePrefix"="UMTS"
"EnableUsimEF"=dword:00000001
"ShowNITZPage"=dword:00000001
"HiddenFDNFunction"=dword:00000000
"HiddenBCFunction"=dword:00000000
"FDNQueryPBTimeout"=dword:00060000
"ShowFDNPage"=dword:00000001
"ShowTtyPage"=dword:00000001
"ShowUMTSBandPage"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandType]
"ItemValue4"=dword:00000003
"ItemName4"="UMTS(2100+800)"
"ItemValue3"=dword:00000002
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemValue2"=dword:00000001
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemValue1"=dword:00000000
"ItemName1"="Auto"
"ItemCount"=dword:00000004
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\NetworkType]
"ItemValue3"=dword:00000002
"ItemName3"="WCDMA (3G)"
"ItemValue2"=dword:00000001
How to do it?
So, if anyone knows how to, for the Blue Angel (or any other GSM-only multi-band phone) on WM5 to enable the Band selection page for switching available networks, I'd be grateful....

Cjbs,
I am having no service issues on my Blue Angel WM6 also, so i'm interested on this.
In my case i'm convinced that there is a problem with GSM on 850Mhz with BA and WM6, since whenever i get no service and i choose manual network, the only network i see is 72410 (MCC/MNC) which is Vivo in Sao Paulo, Brasil, which is the only GSM 850 Mhz operator in Brazil, but rather i'm using a 72403 which is TIM Sao Paulo, Brasil 1.800Mhz operator.
So, it seems that whenever there is a 850mhz network available BA locks up and cannot keep searching on the other bands, because if it did it would find my network.
So, i have found the following MSDN pages that relate to this:
http://msdn2.microsoft.com/en-us/library/aa919118.aspx
http://msdn2.microsoft.com/en-us/library/ms889542.aspx
As you can see the first one is only related to Windows Embedded CE registry settings. Anyway i've tried tweaking with - not for this issue, but rather properly displaying the operator name on today - DisableCPHSOverride value and EONSEnabled with no apparent result.
However, this points out to other registry settings that are related to radio:
HKEY_LOCAL_MACHINE\Comm\Cellular\RIL
HKEY_LOCAL_MACHINE\Software\Microsoft\RIL
HKEY_LOCAL_MACHINE\Comm\Cellular\CellTSP
HKEY_LOCAL_MACHINE\Comm\Cellular\RIL\RemoteCallType
but specially
HKEY_LOCAL_MACHINE\Security\Phone
HKEY_CURRENT_USER\ControlPanel\Phone
On the last one, i have under "features" dword:33867736, but on the link above there is "Microsoft recommended default configuration for GSM radios" which is dword:0206C7D8.
I will try tweaking here to see what happens.
JP

Another thing that I noticed, after chaning locations from Hong Kong to the US is that unless I specifically left the band settings before upgrade (i.e. in WM2003SE) on Automatic, then no US network would be found. I applied the registry changes to the WM2003SE device to support enabling more GSM bands, and selected the 850 + 1900 MHz option, which worked. Of couse if I chose 800 + 1800, then upgraded to WM5, then it wouldn't find a network.
So the issue is that there is no way (that I know of) in WM5 for GSM to be able to select the frequencies on which networks will be searched.

JPBRA said:
Cjbs,
I am having no service issues on my Blue Angel WM6 also, so i'm interested on this.
In my case i'm convinced that there is a problem with GSM on 850Mhz with BA and WM6, since whenever a receive no service and i choose manual network, the only network i see is 72410 (MCC/MNC) which is Vivo in Sao Paulo, Brasil, which is the only GSM 850 Mhz operator in Brazil, but rather i'm using a 72403 which is TIM Sao Paulo, Brasil 1.800Mhz operator.
So, it seems that whenever there is a 850mhz network available BA locks up and cannot keep searching on the other bands, because if it did it would find my network.
So, i have found the following MSDN pages that relate to this:
http://msdn2.microsoft.com/en-us/library/aa919118.aspx
http://msdn2.microsoft.com/en-us/library/ms889542.aspx
As you can see the first one is only related to Windows Embedded CE registry settings. Anyway i've tried tweaking with - not for this issue, but rather properly displaying the operator name on today - DisableCPHSOverride value and EONSEnabled with no apparent result.
However, this points out to other registry settings that are related to radio:
HKEY_LOCAL_MACHINE\Comm\Cellular\RIL
HKEY_LOCAL_MACHINE\Software\Microsoft\RIL
HKEY_LOCAL_MACHINE\Comm\Cellular\CellTSP
HKEY_LOCAL_MACHINE\Comm\Cellular\RIL\RemoteCallType
but specially
HKEY_LOCAL_MACHINE\Security\Phone
HKEY_CURRENT_USER\ControlPanel\Phone
On the last one, i have under "features" dword:33867736, but on the link above there is "Microsoft recommended default configuration for GSM radios" which is dword:0206C7D8.
I will try tweaking here to see what happens.
JP
Click to expand...
Click to collapse
Do you had success on this configurantion ? I´m Braziliam using TIM too and I have the same problem.
Thanks,

Sorry, no success with this registry tweak.
JP

CJBS said:
Another thing that I noticed, after chaning locations from Hong Kong to the US is that unless I specifically left the band settings before upgrade (i.e. in WM2003SE) on Automatic, then no US network would be found. I applied the registry changes to the WM2003SE device to support enabling more GSM bands, and selected the 850 + 1900 MHz option, which worked. Of couse if I chose 800 + 1800, then upgraded to WM5, then it wouldn't find a network.
So the issue is that there is no way (that I know of) in WM5 for GSM to be able to select the frequencies on which networks will be searched.
Click to expand...
Click to collapse
Hum .... very interesting ! Thanks for posting this.
Since i cannot use WM6 anyway, i'm on my way of a downgrade to WM2003SE, but i will try to remove 850Mhz and then upgrade back to WM6 to see what happens.
JP

CJBS,
I've downgraded to WM2003SE and used your cab above, without success. Yes, the phone band tab is enabled, but chossing the 900 / 1800 Mhz band doesn't solve my "no service" problem.
Instead, i have used this cab http://forum.xda-developers.com/showpost.php?p=1628234&postcount=9 which is working for me, as i can see that the 850 band is no longer being scanned (i don't see the network when in manual selection).
I've found that the registry settings of both cabs are a little bit different:
cdaly1970 said:
GSM900 has a value of 1
GSM1800 has a value of 2
GSM900/1800 has a value of 3
GSM1900 has a value of 4
Automatic has a value of 7
gsm850 has a value of 8
So, what are values 5 and 6?? I could set those values, but I have no idea how I'd check to see what band I am current using. Anyone got any thoughts?
-Chris
Click to expand...
Click to collapse
CJBS said:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhonePH]
"ItemValue4"=dword:00000000
"ItemName4"="Reset Value to zero"
"ItemValue3"=dword:00000003
"ItemName3"="GSM 900 / 1800 (Europe/Asia)"
"ItemValue2"=dword:00000005
"ItemName2"="GSM 850 / 1900 (North America)"
"ItemValue1"=dword:00000007
"ItemName1"="Automatic"
"ItemCount"=dword:00000005
"ShowBandPage"=dword:00000001
"ItemName5"="GSM 900 / 1800"
"ItemValue5"=dword:00000003
"ItemName6"="GSM 1900"
"ItemValue6"=dword:00000004
"ItemName7"="GSM 1800"
"ItemValue7"=dword:00000002
Click to expand...
Click to collapse
So, there is seems to be some errors between the two cabs registry entries. Don't know how to properly find out which are the correct values for each band.
Also, i've opened both cabs and they different files:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see there is some differences in the cabs, eventhough some files seem to be identical. Maybe combining the two cabs and editing the registry tweaks could make these files work 100% on WM2003 and perhaps on WM5 or WM6.
What do you think ?
JP

Not sure... but a guess is that:
- there are only five spots available to be used (the radio buttons)
- there are four unique network bands for GSM (900 / 1800 / 850 / 1900), along with the combinations (900+1800 / 850+1900), and then there's Automatic.
So I'm guessing that the different CABS have options that are more likely to be used in the location for which they are released (eg. people in HK wouldn't frequently want to explicitly specify the 850 network over the 1900).

Same Problem here, Whenever i switch to WM5/6/6.1, my phone stops working. I live in Pakistan, Asia. While i can recieve SMS, I cant call or get a call. The operator says "The number u dialed is not responding at the moment".
So what should i do to make my phone work with WM5/6/6.1 ?
I need WM6 badly. Still no one is able to diagrnose thise problem
I hope someone will come up with a gud idea

Hi
Hi Guys, news about this?
I'need fix band frequency in a T2223 or P3400, i'll set in 850/1900
I had enable band options but when I'll set the error mensage appears.

{FIXED} Cingular / Cellular Video and Kaiser rom

I've been digging around for an answer to this and can't seem to find it. I'm running the Kaiser rom on a Tilt. There appears to be something the Cingular Video site sees on the phone to identify it as a 3G phone and with the Kaiser rom it's not there. I can get the Media Net home page just fine with the proxy settings in one of my connection profiles, but this is what I get when going to the CV site...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?
UPDATE fixed: You can read the entire thread, but am going to consolidate what I did.
1. Reg edit
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II/ <----Changed to HTC-8900 or HTC-8500
This will ID the phone to the CV web site as a at&t phone
2. Download & Install
From this thread download the cab from the "Cingular Video Only" link. This installs the right version of RealPlayer that works with the CV videos.
3. Connection
Make sure you are using a connection profile that uses APN wap.cingular and DOES NOT have the proxy checked.
4. Proxy Manager
Download the Proxy Manager cabs and enable the hidden proxy. You can disable the proxy when you don't need it. I find surfing with PIE I can leave the proxy enabled for most of my browsing. (I'm assuming you know what these cabs do and how to use them)
Restore Proxy cab
Disable Proxy cab

Me, Too
I'm having the exact same issue. I can't find anything in the registry that appears to be related to it. A fix for this would be greatly appreciated.

I had the same problem as well. I tried a couple different ROMs and all had the same result, so I had to put the AT&T ROM back in and everything works. I would love a fix because I don't know how much longer I can stand the AT&T Rom after using the HTC ROM.

GWelker62 said:
I've been digging around for an answer to this and can't seem to find it. I'm running the Kaiser rom on a Tilt. There appears to be something the Cingular Video site sees on the phone to identify it as a 3G phone and with the Kaiser rom it's not there. I can get the Media Net home page just fine with the proxy settings in one of my connection profiles, but this is what I get when going to the CV site...
Any ideas?
Click to expand...
Click to collapse
Could be a proxy issue. If you don't go through the actual Cingular Proxy, you won't be able to connect.
Are you using WAP.CINGULAR as your connection? You need to.
Make Sure you install the Cingular CABS and the Enable/Disable Proxy cabs. Enable the Proxy and you shouldn't get that error.

something to check/try...
I'm using a Tilt and a stock Tilt ROM (and CV works just fine). You might want to look at this, though, as it was causing a problem with my online banking:
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC-8900/1.2 Mozilla/4.0"
Make the following 1-digit change (a "9" to a "5"):
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC-8500/1.2 Mozilla/4.0"
Of course, this may have absolutely nothing to do with it (you're on your own for testing)...

jakirkla said:
Could be a proxy issue. If you don't go through the actual Cingular Proxy, you won't be able to connect.
Are you using WAP.CINGULAR as your connection? You need to.
Make Sure you install the Cingular CABS and the Enable/Disable Proxy cabs. Enable the Proxy and you shouldn't get that error.
Click to expand...
Click to collapse
Yes, I am using APN wap.cingular. I have the proxy settings also in a Media Net connection profile. I can get to the Media Net home page just fine, which will be confirmation the settings are correct. I think it has to do with something on the phone the site has to see to identify it. I will look into the user agent and tinker with that.

GWelker62 said:
Yes, I am using APN wap.cingular. I have the proxy settings also in a Media Net connection profile. I can get to the Media Net home page just fine, which will be confirmation the settings are correct. I think it has to do with something on the phone the site has to see to identify it. I will look into the user agent and tinker with that.
Click to expand...
Click to collapse
ok. I'm using the Lite ATT Rom and it works just fine. Good luck.

goestoeleven said:
I'm using a Tilt and a stock Tilt ROM (and CV works just fine). You might want to look at this, though, as it was causing a problem with my online banking:
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC-8900/1.2 Mozilla/4.0"
Make the following 1-digit change (a "9" to a "5"):
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC-8500/1.2 Mozilla/4.0"
Of course, this may have absolutely nothing to do with it (you're on your own for testing)...
Click to expand...
Click to collapse
My settings are not quite the same, but your post helped anyway. I have "HTC_TyTN_II". I changed that to "HTC-8500" and I now get>>>
Now the problem I get is, when I click on a video it doesn't play, it gives me a pop up to download a file. I remember it doing this sometimes with the 8525 and it appeared there was something wrong with the site. Maybe some of you using the at&t rom can let me know if you can play videos right now.

make sure the proxy server is enabled...

goestoeleven said:
make sure the proxy server is enabled...
Click to expand...
Click to collapse
It is... I think it has to to with the fact the file it is trying to play is not associated with Media Player. Care to share anymore reg settings? Or maybe dump your settings and make a copy for us to download. I could comb through them and maybe I can find were it makes that association.

GWelker62 said:
My settings are not quite the same, but your post helped anyway. I have "HTC_TyTN_II". I changed that to "HTC-8500" and I now get>>>
Now the problem I get is, when I click on a video it doesn't play, it gives me a pop up to download a file. I remember it doing this sometimes with the 8525 and it appeared there was something wrong with the site. Maybe some of you using the at&t rom can let me know if you can play videos right now.
Click to expand...
Click to collapse
I recall in another thread, to download Realplayer, and setting it to use the Media Net conenction. Use the Search XDA through Google link at the top of the page to get a better search result here for it.

greg3d said:
I recall in another thread, to download Realplayer, and setting it to use the Media Net conenction. Use the Search XDA through Google link at the top of the page to get a better search result here for it.
Click to expand...
Click to collapse
DOH!! I just thought of that and was coming back here to post it. I will install RealPlayer and report back.

GWelker62 said:
DOH!! I just thought of that and was coming back here to post it. I will install RealPlayer and report back.
Click to expand...
Click to collapse
OK, I installed RealPlayer, and that didn't work. I already had the cab handy because I had to do this for the 8525 before WM6 came out. But it seems like there was more that had to be done than just install RP. I will go digging in the Hermes forum to see if I can find that thread.

That registry is exactly what we all needed! I wonder if anybody can combine this registry fix with the CV cab that's available from vp3g in the Hermes forum for an easy install.

FIXED!
Ok, I got CV working. I used the Realplayer installer cab found in this thread>>
http://forum.xda-developers.com/showthread.php?t=305897&highlight=at&t+RealPlayer
Now this will not be enough. Using a connection profile with the proxy settings I was getting this:
This is the same problem I had with the 8525. What you have to do is use APN wap.cingular WITHOUT the proxy settings enabled. Then you will have to have the "auto detect proxy" settings in the registry. Which these are accomplished with the Proxy Manager cabs. I manually wrote those settings in. I couldn't find where someone has the Proxy Manager cabs for download. (Hint Hint for someone to find them ).

You rang???

fb401 said:
That registry is exactly what we all needed!
Click to expand...
Click to collapse
WOOHOO-
Flashed back to original ROM because of the vid/3G thing--WAY HAPPY-reflashing the newer ATT ROM cuz the radio is DEFINETLY better!
Now, if anyone can figure out how to get rid of that Billboard MIDlet?
that would be awesome.
Alemaker

LuvMy8125 said:
You rang???
Click to expand...
Click to collapse
XOXOXO!!

so is it working yet and if so then could someone dumb down the instructions for me?

Well,
I spoke too soon. Reflashed the- New ATT rom aku 0.4.4 build 18128 radio 1.27.14.09 from the thread of the same name, which has a better radio, but, that regedit didn't work for me.
Still getting the CV 3G error-back to the original ROM
Alemaker

[NEW] 0mega_Final ROM!!!

[New] 0mega_final Rom
**based off the HTC WM6 Rom
Free Storage: 44-46MB
Free Program: 27-30MB !This is with page pool set to 6MB!
Purpose: For fun. To help others, and to make a fast, stable rom.
Features Removed:
• Transcriber
• Windows Live
• Autoupdate
• Office
• Sqlcemobile
• Enterprise
• Zip
• MMS
• Useless sounds and pictures
• Bluetooth Explorer
• Voice Speed Dial
• SAP Settings
• Catalog
Features Added:
• Keyboard Skin – Not So Black
• Calculator Skin
• On/Off Comm Manager
• HTC Dialer
• psShutXP
• Macromedia 7
• Adobe Flash Lite 2.1
• ROM Settings
• Interchangeable HERALD/WING keyboard (This allows both the herald and wing to use this ROM)
• Schaps Adv. Config. 2.0
• PHM Reg Edit
• Glossy Black Bars
• Start Clean
• BtCrawler (this replaces Bluetooth Explorer)
• HTC Album
• HTC Audio Manager Black
• FlashVideoBundle
• Oxios Memory (Hibernate)
• Softkey Changer
• TCPMP
• PocketRAR
• BatteryStatus 218
• S2U2 0.99
• WMP Touch Skin
• Many reg tweaks
• ATIFix
• Magic SS (Phone screenshot taker)
Installation instructions:
**IT IS RECOMMENDED TO HARDSPL!
1. Download here.
2. Extract to desktop (easier access)
3. Place .nbh file in RUU Folder.
4. Run herald-uspl.exe and follow steps.
5. If successful, it should open the Romupdateutility.exe automatically.
6. Do what you need to flash it. You should NOT be getting errors!
7. If everything went right, you should be able to start using your NEW ROM!!!
8. Congrats and play!
***As stated above, to obtain the MB around the “Free Programs,” you MUST change page pool to 6MB! I will not show or tell you how to do that because it’s all over the forums. Don’t be lazy and look around. It will benefit you!
***I am not responsible for any damages or bricks to your device. Please use with caution!
Help goes to Ivanmmj for some help with programs, Fultotop with dialer help, and the many others who have created the custom programs for us at xda-developers.com! Thank you, fellas!
If there are any questions (please don’t ask questions which are able to be found on the forums, I will not answer if that happens), leave a comment and I will try to respond with an answer ASAP. This also goes for any bugs, or errors in the rom. If there are any, please report so that I may find a way to fix it.
That’s that! Have fun and hope you enjoy!
0mega_final ROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Well, I forgot to mention that if you want even MORE FREE space for programs or storage, do some reg editing and it could help alot.
For example, you could turn of the dialer if you don't really want it, that'll free your programs. There are many other things you could to make your PDA bigger! Just a little note if you wanted to try it out.
------
There is one more thing I would like to add. Feel free to give out your thoughts and opinions like what you might like on the rom or what you would like removed. If there's a majority for something to be added/delete, I will do it or at least try to. The only thing that I ask in return is NO SPAMMING and NO COMPLAINING!
Have fun!

If your Activesync-Mobile Internet Connection is not working, this is NOT the cause from my phone.
The problem is located in your Desktop/Laptop PC with the .reg files.
Here's the SOLUTION!

Another one just incase lol =]

just tried out this rom and for some reason I can't use WLM through the web browser, I keep getting an error.

well, if you read the Removed features, I have removed windows live. sorry about that.
anyways, could you tell me what the error specifically said so that i may get a clue to help you further?
i'm sure it will work once again without error if you decide to install the cab file for wlm.
try it out

Nice, Fast, Clean
Hello, Tried your rom. Super Fast. Great Job !!!!
I had to flash back to the almost Perfect Open Touch 3.0 lite because of Internet Sharing.
Yours has it. but without the Network Wizard to set to T-Mobile USA I can't access the net. My Wing is my only ISP. I have the same problem with Touch-It roms.
super fast, great rom though.

zcink said:
Hello, Tried your rom. Super Fast. Great Job !!!!
I had to flash back to the almost Perfect Open Touch 3.0 lite because of Internet Sharing.
Yours has it. but without the Network Wizard to set to T-Mobile USA I can't access the net. My Wing is my only ISP. I have the same problem with Touch-It roms.
super fast, great rom though.
Click to expand...
Click to collapse
Thank you very much! Appreciate the comment!
You know it's a good thing that you've mentioned the "Network Wizard" because I was debating about putting it in. If more people ask for the "Network Wizard" then I'll see that I do it ASAP.
Once again, thanks!

zcink said:
Hello, Tried your rom. Super Fast. Great Job !!!!
I had to flash back to the almost Perfect Open Touch 3.0 lite because of Internet Sharing.
Yours has it. but without the Network Wizard to set to T-Mobile USA I can't access the net. My Wing is my only ISP. I have the same problem with Touch-It roms.
super fast, great rom though.
Click to expand...
Click to collapse
hey zcink, what exactly does network wizard do? i have never used it and i have not seen any ill effects. i set up my proxy manually which takes about 1 minute as soon as i am done flashing a new rom. that always gets me online and allows my internet sharing to work also. do you do the proxy hack 5.99 or data plan 19.99? cause as far as i know they are the same speed. i just wonder will duprades internet sharing cab work on this rom?

fishwiz45 said:
hey zcink, what exactly does network wizard do? i have never used it and i have not seen any ill effects. i set up my proxy manually which takes about 1 minute as soon as i am done flashing a new rom. that always gets me online and allows my internet sharing to work also. do you do the proxy hack 5.99 or data plan 19.99? cause as far as i know they are the same speed. i just wonder will duprades internet sharing cab work on this rom?
Click to expand...
Click to collapse
network wizard sets up T-Mobile Data. I guess yes you can do manually but I don't know the settings.
I've tried duprades internet sharing cab but cannot get it to work.

The Network Wizard sets up the network settings for your device, whether it's tmobile, att, or if you're in Russian or China, etc.

fishwiz45 said:
hey zcink, what exactly does network wizard do? i have never used it and i have not seen any ill effects. i set up my proxy manually which takes about 1 minute as soon as i am done flashing a new rom. that always gets me online and allows my internet sharing to work also. do you do the proxy hack 5.99 or data plan 19.99? cause as far as i know they are the same speed. i just wonder will duprades internet sharing cab work on this rom?
Click to expand...
Click to collapse
what's the difference between duprade's internet sharing and the OEM's?

zcink said:
network wizard sets up T-Mobile Data. I guess yes you can do manually but I don't know the settings.
I've tried duprades internet sharing cab but cannot get it to work.
Click to expand...
Click to collapse
hey, i guess if you want to do it manually, see if this works.
go to settings>connections>connections
click "add a new modem connection"
name it "T-Mobile Data"
select "celluar line (gprs)
access point name: wap.voicestream.com
leave user name and everything else blank (unless you have a data plan then you can put it in) and click "finish"
see if that will enable you to use t-mobile data, if not, then i guess i should add "networking wizard" later.
good luck.
**edit**
no luck needed. i just tried it and it works for me. give it a shot! =]

zcink said:
network wizard sets up T-Mobile Data. I guess yes you can do manually but I don't know the settings.
I've tried duprades internet sharing cab but cannot get it to work.
Click to expand...
Click to collapse
yeah i tried it with ivanmmj's clean rom also with no luck, but just found this one that he said is fixed. if you flash to anything new and try it let me know if it works plz. oh and the settings are SETTINGS/CONNECTIONS/CONNECTIONS/SET UP MY PROXY/216.155.165.50:8080....5.99mo.

for some reason, the ok button would just not exit the programs.

network wizard
very nice and fast-
would rule if you added network wizard =)
my flashing would stop here

huh?
oh and whats with the 2nd splash screen? i dont get it... lol

@ hybridmonk:
Haha, the second splash screen was made for pure fun. I wanted to see if it actually worked if I changed it. Luckily, it did, but then I got a little lazy and just left it. You're the third person who insisted that I should put network wizard. I think I might do it, but while I do that, I might try to make a NEW rom with it. Be on the look out for it. I might do it soon.
@bowlopho:
Well, for me, everything worked perfectly. What do you mean the "ok" button won't exit programs? Do you mean that when you close a program, but then you check the list, it's still there? That's typical, just go through the settings in task manager.
I thank both of you for giving your thoughts and opinions!

Help Please
I LOADED THE OMEGA PERFECTLY BUT I WAS MISSING THE NETWORK WIZARD. SO I FOUND A NETWORK WIZARD .CAB AND IT PROMPTED ME TO RESTART THE PHONE. THE PHONE CUT OFF AND NOW IT JUST KEEPS SHOWING THE OMEGA, AND THE GUY WITH THE HAIR AND THEN RESTARTS ITS SELF AND IT JUST KEEPS DOING IT. CAN U PLEASE HELP ME???

Can't Setup my BB connect.

Ok. I have a BB pearl and an AT&T Tilt. My BB pearl is provisioned for unlimited everything. (Tethering, Blackberry, Internet). I work for AT&T so this is my company issued SIM. I downloaded the BB connect software on my Kaiser so I could switch out my SIM into my kaiser and just use the BB for making calls and SMS. It's obsolete compared to the TILT as in the things you can do with it. Personal Preference I guess. Here's my issue.
Here is a screenshot of my version of BB connect:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now I tried to get it to register with the BB network. I clicked on Suspend and then I clicked on it again to refresh and when I clicked on my H for HSPDA it said Blackberry and it had a timer next to it indicating it had been connected for so long. About 10 seconds later it disconnected and this is what I saw.

...................................................................................................
If I click on details I get this:
I checked my browser settings on my phone and disable the box for:
This network uses a proxy server.
I am able to access the internet, tried soft reset with stylus, and hard reset by pulling battery out. Same issue. I tried searching on google but only threads I find is how to get the BB Connect installed. There is no Troubleshooting section. I'd really appreciate it if you guys would be kind enough of looking at these screenshots and helping me. Until then I'll keep playing with it. (That's what she said).
Thanks guys

I also want to add that I will not be using this for a BES email. I want to be able to have my personal email pushed to my phone. I'm going to look around so I can find a way of getting BB messenger to work. I heard someone got it to work. I know it's possible because I know someone who has it working 100 percent on their T-Mobile version of Kaiser. I am provisioned for Blackberry Enterprise Feature even though I don't use it. So I should be straight.

I have fixed with this problem before. I had to call at&t and have them change a code on my account. I don’t know the exact terminology but, what they did is change a code on my account from blackberry to windows mobile blackberry. Then the mail flowed.

Ok I already stated I have all the correct provisioning on my account. I have a company SIM we are provisioned with everything. I can't even get it started to get email as you can see from the screenshots.

My apologies. I forgot to mention that there is a registry key that need to be modified for 6.1 roms. I can tell because you PIN number is still pending. See the following post.
http://forum.xda-developers.com/showthread.php?t=400020
There is a mistake in the registry key line. It should read:
HKLM/System/Version/AKU. Change the value of the AKU key to REG_SZ of 0.4.4
After this soft reset the device. It can take as long a 5 minutes toe get the pin number from the network. You can tell your good because you will see the BB (or what looks like 4 0's) in the system tray. You will also notice that you have received a pin number.
I have this setup working with the latest at&t 6.1 rom v3.55.502.1 and BBC V4.0.0.100

I just check my records. You will still have to re-provision you sim for windows mobile blackberry connect. Again I have made this upgrade before.

There is a mistake in the registry key line. It should read:
HKLM/System/Version/AKU. Change the value of the AKU key to REG_SZ of 0.4.4
Click to expand...
Click to collapse
Ok I get all the way to Version (Mine says Versions). If I click on it. I don't have an AKU there. Would you mind providing a screenshot so I can manually add it.

You are correct it is versions. remember this only needs to be applied to Mobile 6.1. And you will need to re-provision from blackbery to windows mobile blackberry.

Ok my problem is solved. No need to re-provision anything since I already stated 2x that I was provisioned. This is what I did.
1. I went to the registry and modified AKU value,
2. I disabled my 3g connection and bought it down to E
3. Rebooted device.
4. Installed BB connect software via the phone.
5. Installed software
6. Soft reset
7. Went to the softare and did a register now
8. Got a pin!!
9. Logged into my Blackberry account online and update PIN and IMEI of my Kaiser so that it would xfer all my email accts to my Kaiser
10. Enabled 3g again.
11. Sat back and relaxed it works now.
Now I just have to figure out how to get BB Messenger to work for sending PIN messages as well. I know there has to be a way if you can read them why not be able to send them. Yadadamean?