Hello everyone,
If you guys are coming from Samsung Galaxy S II, you all have heard about Batista Rom, the developer angelrom or batista70 has yet created a new rom for Samsung Galaxy Note, the details are as follows :
Changelog:
Inserting AbyssNote 1.0 kernel
Compiled from source with Samsung KJ6 update to 2.6.35.14 based
Selectable frequencies:
1600-1400-1200-1000-800-500-200-100
Frequency standard boot: 1400/200
Governor: ondemand ondemandx, interactive, interactivex, smartass, smartassv2, performance, powersave, conservative.
ondemand start fast and deep sleep detection on low-power idle
Possible to change the processor voltages and frequencies through SetCPU
GPU clock and voltage control
I / O schedulers available: BFQ v3, SIO, CFQ, deadline, VR, noop
Application Support Tegrak 2nd core
Jhash V3
Hard floats enabled
Posted Tweak sharpness screen
Submissions battery saving tweaks
Added tweak to deep sleep
Fixed all warnings
Supports CIFS, NTFS, NLS
Car efs enabled backups (backup / data / .Abyss) battery and calibration
Almost all functions of the 'Abyss Plus Kernel for Galaxy S2
Rom:
Added notifications to 6 bar buttons (Button added enabling / disabling Data)
Added 2nd core application Tegrak
Posted Acrobat Read
Added application apn Italian
Added battery percentage
Changes on stock
optimized input script
Adding bootanimation Samsung Nexus
Kernel :
AbyssNote Kernel v1.5
Fix for 50Mhz frequency
Enabled intellimand governor
Disabled luizactive governor
Ashmem fix
Ondemand, conservative governor tweaks modified
BLN kernel support enabled (even though we have to change liblights.c, for now
with BLN the LEDs do not work properly)
Changed optimizations
Installation procedure:
Copy the rom downloaded from the link on the SD or USB memory on the phone
Enter CWM Recovery and select install zip from SD Card
Choose select zip from sdcard (sdcard or internal)
Flash the ROM zip file
Restart.
WORD OF CAUTION
This will remove root and you may not be able to run programs needing Superuser privileges.
Link :::
AngelRom Rhapsody
Just download the app superuser and busybox to get back the root functions
Great ROM, installed it yesterday, but it seems to eat much more battery than with the stock ROM. CPU Spy shows that the processor is using the maximum frequency very often and doesn't enter properly into deep sleep. But, for a first custom ROM for our Note I think it's great .
Hi is this rom stable enough ? Any known bug?
Sent from my GT-N7000 using XDA App
Nice one. Hope there will be more roms soon.
Sent from my GT-N7000 using Tapatalk
albireox said:
Great ROM, installed it yesterday, but it seems to eat much more battery than with the stock ROM. CPU Spy shows that the processor is using the maximum frequency very often and doesn't enter properly into deep sleep. But, for a first custom ROM for our Note I think it's great .
Click to expand...
Click to collapse
Did u use setcpu to tune the speed?
Sent from my GT-N7000 using XDA App
Galaxy Note
Welcome to Galaxy Note...
Good job dude....
hooray thanks angelrom!
new 1.1 kernel just posted. hope it's ok if I replicate the post:
Ecco il link del AbyssNote kernel 1.1
http://www.multiupload.com/VVSYRY95H8
Changelog:
Add frequency 1704Mhz
Frequencies now available:
1704-1600-1400-1200-1000-800-500-200-100
Add RCU classic
Add JRCU
cgroup: Introduce timer slack subsystem
Add tweak by IntersectRaven
s5p devs.c: nLuns = 2
Add separate handler for GPIO_BT_WAKE on/off
Enable BT debugging for BT_WAKE logs
Enabled ram console
wakelock: remove sync workqueue
input: evdev: Add missing wake_lock destroy
lib: introduce some memory copy macros and functions
Fixed ext4 disk write performance regression
Other changes that do not remember
ATTENZIONE: Dopo aver flashato il kernel, per entrare in recovery CW occorreranno ora 20-30 secondi perchè sono stati inseriti dei controlli.
Quindi non allarmarsi se per un pò lo schermo rimane nero. La recovery dopo 20-30 secondi apparirà
hippo1n2 said:
Did u use setcpu to tune the speed?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
yes
How to flash this 1.1 kernel ? CWM?
Santa
Good!
follow me on twitter @_mowmo_
santoosh said:
How to flash this 1.1 kernel ? CWM?
Santa
Click to expand...
Click to collapse
You must flash to Cwm recovery
Inviato dal mio GT-N7000 usando Tapatalk
Can I use this new kernel with the KKA Rom?
Can I flash this Rom over my already installed KKA Rom without losing any data?
tids2k said:
Hello everyone,
If you guys are coming from Samsung Galaxy S II, you all have heard about Batista Rom, the developer angelrom or batista70 has yet created a new rom for Samsung Galaxy Note, the details are as follows :
Changelog:
Inserting AbyssNote 1.0 kernel
Click to expand...
Click to collapse
Hi,
is the source for that kernel available somewhere?
Thanks
AbyssNote kernel 1.1 sources in upload this evening o max tomorrow on batista70 forum
Nice, could you include root into this?
hippo1n2 said:
Did u use setcpu to tune the speed?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Yes I used it jst for lowering the voltage, but setcpu hasn't anything to do with higher power drain.
Maybe the new kernel will sort things out.
Sent from my GT-N7000 using XDA App
RRibeiro said:
Can I use this new kernel with the KKA Rom?
Can I flash this Rom over my already installed KKA Rom without losing any data?
Click to expand...
Click to collapse
This 1.1 kernel runs flawlessly on KKA rom, just tried it! Go flash it!
angelom said:
AbyssNote kernel 1.1 sources in upload this evening o max tomorrow on batista70 forum
Click to expand...
Click to collapse
Thats the spirit! Thanks a lot.
Can you post a link here once it is uploaded? My Italian is not as good as i wished it would be. Enough for due piccolo gelati or due caffè in Lucca though
Thankz a lot. Gona instal this first rom in my note. Gud job.
Related
[KERNEL] [2.6.29.6] [Flashable-.zip] [LAGFIX][BFQ][Oc][Uv] #3 "Patches 'O Klick"
So after countless hours of failure, I finally found my issue. It was an embarrassing one, but O well. What we have here is a fully stable kernel for the Vibrant. I have spent many hours on this and have been running it on my vibrant for some time now. Be sure to read the changelog for full info. At 1.2 Ghz I was getting MFLOPS scores pushing 10 MFLOPS! Performance is surely nice on this one. Another thing to note is the undervolting on my kernel. This will give optimal battery life for users. So, please enjoy, and post and errors with a logcat
This is compiled for the stock ROM. It will work on FrankenTwiz, Bionix, and many ROMs. Let me know what ROMs you try it on, and what ones it works best with.
hurrpancakes said:
This would be my first time using an oc/uv kernel. I know to get the oc, I have to go into setcpu and put the scaling to conservative, which I've already done. Ran quadrant, and got a score of 2790!
Great kernel!
Click to expand...
Click to collapse
mygti02 said:
wow......this kernel is amazingly fast......screw quadrant....mine is only coming up in the 900's but its way faster than the last lag fix i was using that was giving me 2700+ ratings in quadrant.
Great job!!
Click to expand...
Click to collapse
Instructions:
- Download the latest .zip provided below
- Put it on the root of your storage (the 14Gb one)
- Go into ClockWork Recovery
- Flash the .zip like you would a ROM
- Reboot
ENJOY!
Credits: Cyanogen, Wesgarner, Euegene_373, Barakinflorida
Download: http://kingxklick.com/forum/viewtopic.php?f=27&t=230
All my code is on
As you would expect, I am not responsible for anything that happens to your device
If you like my work follow me on Twitter:
CFS Changelog
Kernel #3
- NOW patched up to 2.6.29.6 from .29 (In settings it will still read as just 2.6.29)
- Many bug fixes to the kernel itself from the linux project
- Numerous patches to the CPU scheduler 'CFS' which we are currently using
- *NEW* 'Interactive' CPU Governor (You can enable this in SetCPU)
- Bluetooth patch: Enter active mode before establishing a SCO link. *thanks for finding the code Wesgarner*
- Root UID 0
- Root GUID 0
- AUFS2 standalone patches *via Cyanogen*
- Built with Cortex-a8
- Compiled with Neon Optimizations
- Using CT-NG toolchain *optimized for our CPU's*
- IPv6 fixes via mainline
- Netfilter tether: Fix unaligned memory access
- Netfilter stability enhancements *all via mainline, thank them*
- Much more I will add
Kernel #2
- Implemented "Speedy King Lag Fix"
- Some more voltage tweaks since it is going well
- NEW 'Interactive' Governor support
- Conservative governor tweaks (via Herver)
- Touchscreen is more responsive
- Compiled with optimizations (forgot to do this on #1)
- Compiled with neon opt
- Kernel compacted a little
Kernel #1
- Based off of Samsung Kernel Source
- Overclockable up to 1.2 Ghz! (thanks for the code unhelpful)
- Undervolted mid range frequencies for long battery life!
- Bluetooth patches (via Nick Pelly)
- Capped boot speed at 1 Ghz
- Using CFS CPU scheduler
- Added NEW BFQ I/O scheduler support! (thanks dark)
- Added CGROUPS block for BFQ
- BFQ scheduler set to default
- Anticipatory scheduler support
- Deadline scheduler support
- CFQ scheduler support
- Noop scheduler support
- Conservative CPU Governor set to default
- Ondemand CPU governor support
- Userspace CPU governor support
- Added support for EXT4 filesystems
- More I will add
thanks man, nice to have something we dont' have to flash in Odin
Great work!
Nice to see you in the vibrant neck of the woods king. I'll give this a shot in the morning. If I'm not going to oc will I notice much of a difference between this and the stock kernel?
Cyanogen, King...feel right at home coming from a 32B phone.
Paging Dr B said:
Nice to see you in the vibrant neck of the woods king. I'll give this a shot in the morning. If I'm not going to oc will I notice much of a difference between this and the stock kernel?
Click to expand...
Click to collapse
most definately, overclocking should be fairly stable though, ftw
kingklick said:
most definately, overclocking should be fairly stable though, ftw
Click to expand...
Click to collapse
is this cool too flash with the leaked JI2 Rom?
cdw9800 said:
is this cool too flash with the leaked JI2 Rom?
Click to expand...
Click to collapse
as long as samsung has not changed anything vital in their initramfs we should be just fine !
kingklick said:
as long as samsung has not changed anything vital in their initramfs we should be just fine !
Click to expand...
Click to collapse
ok ima give it a shot and report back
This is gonna sound noob but here it goes. I've never done research on what exactly kernels are and this is all new to me.
This new kernel I can flash like Rom will over clock my device to 1.2ghz or will it give me the option to? Can overclocking hurt my device in the long run?
Does this come with tools to over and underclock when I need to?
Any other info would be great. I'm on Eugene Franklin twis v2, no voodoo or lagfix yet.
Any other info would be awesome.
Sent from my SGH-T959 using XDA App
Works awesome on Frankin-Twiz update 1
buttery smooth
Works with Bionix
Installed, booted fast. Thanks for your hard work.
Good to see you back, King! Do you think this will work ok on Eugene's Hybrid R3? Also, I know some Vibrants (like mine) didn't like jacs OC kernel. Same issues here, or did the undervoltage kernel fix it?
Sent from my SGH-T959 using XDA App
Can we have info on how to revert this kernal back to stock if needed?
Very nice, glad to see another person compiling Vibrant kernels. Have you considered including the voodoo beta4 in one of your future builds?
Working fine on Vibrant 9
Will this work with a lagfix already installed?
What does the bluetooth patch do? I'm hoping improved A2DP quality, please say its so
Sent from my SGH-T959 using XDA App
so.. is it working with JI2?
all4degame said:
Can we have info on how to revert this kernal back to stock if needed?
Click to expand...
Click to collapse
You should just be able to flash it through recovery. It's available as a flashable zip in one of Eugenes threads.
Sent from my SGH-T959 using XDA App
I built this kernel for my daily use, now i decided to share it here!
Work with Nexus World Wide Version (i9023/i9020t).
※ Basically it is made for Official Stock ROM (JRO03E/JZO54K). it may NOT work with other ROMs.
Not working with CyanogenMod!
Main features of this kernel:
1.25GHz
Based on Linux Kernel 3.0.73
Based on AOSP
Touchwake ADVANCED (allowing you wake up your phone by touching screen when you got a notification ) (based on Ezekeel's work)
10-point multitouch
Force AC charging by chad0989
UKSM (Ultra Kernel Samepage Merging)
MTP (thanks to bedalus and Krarvind!)
High Bigmem
BLN by Ezekeel
BLD by Ezekeel
Powerkey Presses Counter
init.d support
Optimized CRC32 algorithm
SLUB
Custom Voltage by Ezekeel
mount dalvik-cache to /cache
undervolted
RCU Boost
Voodoo by supercurio
included busybox
USB OTG v5 by sztupy Read this. (not sure if this work on Jelly Bean)
CRT-off animation fix from CyanogenMod team.
PM_FAST
...
Default: interactive / sio
Thanks to all contributors of this kernel!
And welcome to fork it on my github.
Download vta2-kernel / Changelog
TODO:
Bluetooth battery drain fix.
ROW I/O scheduler ( kernel module )
...
Any Suggestion? Tell me here
hi crt is fix ?
leap_ahead said:
hi crt is fix ?
Click to expand...
Click to collapse
yes.
Thanks for the share.. works great.
krfoy said:
I built this kernel for my daily use, now i decided to share it here!
Tested on my Nexus S i9023 and it should also works on i9020.
Main features of this kernel:
1.24GHz
Based on Linux Kernel 3.0.38
Based on AOSP
for Nexus S JRO03E stock ROM
Bigmem
Touchwake
BLN
BLD
init.d support
Optimized CRC32 algorithm
SLUB
Custom Voltage
mount dalvik-cache to /cache
undervolt
Deep Idle
RCU Boost
Voodoo
included busybox
USB OTG v5
FSync control
CRT-off animation fix from CyanogenMod team.
This kernel uses smartassV2 and SIO as default governor and I/O schedulers.
Thanks to all contributors of this kernel!
And welcome to fork it on my github.
Download vta2-kernel #11 here.
Click to expand...
Click to collapse
Can you make a version with also fast charge? Anyway working great
Inviato dal mio Nexus S con Tapatalk 2
I'd like to see more feedback about this kernel as it looks promising. Thank you
Sent from my Nexus S using xda app-developers app
Kernel is good.. snappy.. nice performance..
There is no 1000mhz on the clock, so it's always on 1.24ghz ..
Pls add interactive governor.. I can't change the governor, only shows smartassv2 ...
Battery life not gr8.. But runs well.. power hungry games are smooth.. good overall..
Sent from my Nexus S using xda app-developers app
spupuz said:
Can you make a version with also fast charge? Anyway working great
Inviato dal mio Nexus S con Tapatalk 2
Click to expand...
Click to collapse
may be included in next stable release.
siddhesh.raikar said:
Kernel is good.. snappy.. nice performance..
There is no 1000mhz on the clock, so it's always on 1.24ghz ..
Click to expand...
Click to collapse
This is inspired by SAMSUNG Infuse 4G, which use the same CPU and do not have 1.0GHz step in its stock kernel.
when there are both 1.24 and 1.0GHz, the governor will prefer to use 1.24GHz. And i thought it may help governor switch between steps faster.
so it won't eat more battery in this case.
siddhesh.raikar said:
Pls add interactive governor.. I can't change the governor, only shows smartassv2 ...
Click to expand...
Click to collapse
I only built smartassV2(tweaked) into kernel. because it balance between battery life and performance.
There are also include kernel module of ondemand and conservative, you could load them by insmod if you like.
Thank you very much and must try it .
krfoy said:
This is inspired by SAMSUNG Infuse 4G, which use the same CPU and do not have 1.0GHz step in its stock kernel.
when there are both 1.24 and 1.0GHz, the governor will prefer to use 1.24GHz. And i thought it may help governor switch between steps faster.
so it won't eat more battery in this case.
I only built smartassV2(tweaked) into kernel. because it balance between battery life and performance.
There are also include kernel module of ondemand and conservative, you could load them by insmod if you like.
Click to expand...
Click to collapse
Thanks... Pls try and include HighBigMem in the next version...
thanks for your kernel! i will try it now and report back
EDIT: unfortunately kernel doesn't work for me - i use it with paranoidandroid and rom was really sluggish at first (maybe cache-related...). then i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
invd said:
thanks for your kernel! i will try it now and report back
EDIT: unfortunately kernel doesn't work for me - i use it with paranoidandroid and rom was really sluggish at first (maybe cache-related...). then i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
Click to expand...
Click to collapse
Not so sluggish at my side.
invd said:
thanks for your kernel! i will try it now and report back
EDIT:i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
Click to expand...
Click to collapse
same here with nstools
@OP or @DaXmax: Is there anything I can do to help at finding the problem? logcat? or is it just my phone being picky?
Deep idle? Are u sure it's fully working?
Sent from my Nexus S using xda app-developers app
ioplkj13 said:
Deep idle? Are u sure it's fully working?
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Its working.
I may replace deep idle with CPUidle or IDLE2 by _thalamus in the future.
invd said:
@OP or @DaXmax: Is there anything I can do to help at finding the problem? logcat? or is it just my phone being picky?
Click to expand...
Click to collapse
try stock kernel or raise up voltage?
krfoy said:
try stock kernel or raise up voltage?
Click to expand...
Click to collapse
can you update OP with to do list feature that are you going to add?
krfoy said:
try stock kernel or raise up voltage?
Click to expand...
Click to collapse
yea, well, with stock kernel (and thalamus and matr1x and air kernel) everything runs fine, but i wanted to know, if there is a way to find out what exactly causes the problem with your kernel and my phone (which also might help somebody else). - raising the vol does not help that much, still some freezes from time to time (even though i'm above stock vols).
Hi friends of XDA, friends of Android, friends of S5830i, friends of ROM's, friends of Kernels, friends of....
This is my last creation: Interactive nit Kernel for GT-S5830i
Based on my kernel ([email protected]), i have created the Interactive nitKernel.
Kernel now includes a system app called nitManager to manage the kernel features and others:
- Set Max Frequency
- Set Min Frequency
- Set Prefered Governor
- Set Prefered I/O Scheduler
- Set Apps Install Location (Apps to Ext-SD for example)
- Set swap (the app will create the correspondig swap partition if not found and enable and disable swap feature)
- Download and Install Busybox if not detected in the device
- Download and install Superuser app if not detected in the device. (Installing Superuser app will slower kernelManager app)
Instalation:
Download the kernel from here:
https://dl.dropbox.com/u/68301491/PDAnitInteractiveKernel.tar
This version is only flashable through Odin.
Just put the file in the PDA section and flash.
Once installed go to your apps and find nitManager App, open it and start managing all the kernel options.
I have tested flashing the kernel directly from fully stock ROM, and works great.
From stock ROM you'll get everything you need to boost your device, su, kernelManager, busybox, swap, superuser, apps2sd etc...
Kernel Features:
Freqs:
156 MHz
312 MHz
624 MHz
832 MHz
Governors:
Intellidemand
InteractiveX
SmartassV2
Conservative
bcm21553
Performance
I/O Schedulers
noop
deadline
cfq
vr
sio --> Got this one from Rafael Baugis Source. Thankyou Rafael, hope this is not an inconvenient.
Fatures:
Enabled Module Loading
Init.d Support
Improved kernel scripts (Many of them, i dont really know why Samsung is opensourcing such sources. I know this is a low cost phone, but...)
Swap support
Ramzswap support
Root --> Kernel is all ready rooted, su is in xbin as usual lol.
Camera, Flash, Wifi etc etc etc... is working fine.
Filesystem Support
ext2, 3, 4
Msdos
VFAT
YAFFS2
JFFS2
Hope you like it.
If you like it please dont forget to press the thanks button, this is always very nice.
ROM developers, please feel free to use my kernel in your developments. I have developed the kernel specially for all of you.
Thank you.
Nice
Can't I just Download Rafael.baugis Kernel and replace Thema Boot.img with yours? IT could be flashed with cwm.
Sent from my GT-S5830i using xda premium
Android-fany said:
Nice
Can't I just Download Rafael.baugis Kernel and replace Thema Boot.img with yours? IT could be flashed with cwm.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
dont do it, stock at bootlogo.
edit: and with odin too o0
Hi Android-fany, its not recommended. I have developed the kernel manager for my kernel. Im not sure it will work on Rafaels. Never tried anyway.
On the other hand the kernel manager has been developed to manage my kernel features, so traying what you say will limit Rafaels kernel to the features in my kernel
Thank you and sorry
Sent from my GT-I9100 using xda app-developers app
axyllum said:
Hi Android-fany, its not recommended. I have developed the kernel manager for my kernel. Im not sure it will work on Rafaels. Never tried anyway.
On the other hand the kernel manager has been developed to manage my kernel features, so traying what you say will limit Rafaels kernel to the features in my kernel
Thank you and sorry
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I know it is not recommended.
Kernels like hells-fusion worked for me on this way
Sent from my GT-S5830i using xda premium
Thanks for this Kernel:good:
it doesnt work for me, anyone with successful boot after flash?
What happens when you flash it? Stuck at bootlogo? Are u using a custom rom or flashed to stock rom?
Sent from my GT-I9100 using xda app-developers app
Stuck at bootlogo with jelly blast 3.0.4
Is this kernel for stock roms? I'm thinking about rooting my mum's ace, but leaving her on stock, but I will be adding mods to her phone!
Sent from my CodefireX AOSP 4.2 Desire HD
Hi HeathenMan,
I will check with jelly blast and come back as soon as possible
Thank you
Sent from my GT-I9100 using xda app-developers app
Hi Andyfox,
With stock no problem. I flashed the kernel many times from stock rom and always with succes.
Thank you.
Sent from my GT-I9100 using xda app-developers app
axyllum said:
Hi friends of XDA, friends of Android, friends of S5830i, friends of ROM's, friends of Kernels, friends of....
This is my last creation: Interactive nit Kernel for GT-S5830i
Based on my kernel ([email protected]), i have created the Interactive nitKernel.
Kernel now includes a system app called nitManager to manage the kernel features and others:
- Set Max Frequency
- Set Min Frequency
- Set Prefered Governor
- Set Prefered I/O Scheduler
- Set Apps Install Location (Apps to Ext-SD for example)
- Set swap (the app will create the correspondig swap partition if not found and enable and disable swap feature)
- Download and Install Busybox if not detected in the device
- Download and install Superuser app if not detected in the device. (Installing Superuser app will slower kernelManager app)
Instalation:
Download the kernel from here:
https://dl.dropbox.com/u/68301491/PDAnitInteractiveKernel.tar
This version is only flashable through Odin.
Just put the file in the PDA section and flash.
Once installed go to your apps and find nitManager App, open it and start managing all the kernel options.
I have tested flashing the kernel directly from fully stock ROM, and works great.
From stock ROM you'll get everything you need to boost your device, su, kernelManager, busybox, swap, superuser, apps2sd etc...
Kernel Features:
Freqs:
156 MHz
312 MHz
624 MHz
832 MHz
Governors:
Intellidemand
InteractiveX
SmartassV2
Conservative
bcm21553
Performance
I/O Schedulers
noop
deadline
cfq
vr
sio --> Got this one from Rafael Baugis Source. Thankyou Rafael, hope this is not an inconvenient.
Fatures:
Enabled Module Loading
Init.d Support
Improved kernel scripts (Many of them, i dont really know why Samsung is opensourcing such sources. I know this is a low cost phone, but...)
Swap support
Ramzswap support
Root --> Kernel is all ready rooted, su is in xbin as usual lol.
Camera, Flash, Wifi etc etc etc... is working fine.
Filesystem Support
ext2, 3, 4
Msdos
VFAT
YAFFS2
JFFS2
Hope you like it.
If you like it please dont forget to press the thanks button, this is always very nice.
ROM developers, please feel free to use my kernel in your developments. I have developed the kernel specially for all of you.
Thank you.
Click to expand...
Click to collapse
No overclocking? :/
yatharthxda said:
No overclocking? :/
Click to expand...
Click to collapse
Feel free to add overclocking support yourself once you figure it out.
I installed it on simplicity final ..
Everything is working gr8 bt it cant mount /sd-ext in recovery ..
Sent from my GT-S5830i using xda premium
Man, we need your help to make kernel for CM7, here the link - http://forum.xda-developers.com/showthread.php?t=2080065 please try to find time to help us
Sent from my GT-S5830i using xda app-developers app
Nice Kernel!
Thanked.
hi axillum I see that your wife has left you a little free..lol...I waited a long time your new job ... very nice)
nit is awesome..liked it a lot...need to ask u one thing...will the ram swap work with the stock rom.coz as far as i know,stock doesnt support int.d
it will work
Ankur19 said:
nit is awesome..liked it a lot...need to ask u one thing...will the ram swap work with the stock rom.coz as far as i know,stock doesnt support int.d
Click to expand...
Click to collapse
no problem. I use swap now on this kernel.
*** THIS KERNEL ONLY SUPPORTS SAMSUNG TW JB 4.1.2 ROMs (STOCK and CUSTOM). DOES NOT WORK IN CM or AOSP!!! ***
*** The Kernel is Safe (MMC_CAP_ERASE disabled) and the included PhilZ Recovery uses delete recursive and avoids brickbug ***
*** Stiil, I take no responsibility if the provided KERNELs causes any problem to your phone, you are warned! ***
Hello Friends,
I am no developer, just an Android lover. I share with you my first custom kernel for Note N7000 JB building from sources. It was made mainly for my hobby and my own needs, but hopefully can be useful to other members.
Forest-HelloWorld-Make-II kernel
As the name suggested, it is essentially a continuity of the C.O.H HelloWorld kernel.
FEATURES:
Features added by me:
- Implement r3p1 GPU driver to JB4.1.2 (from V2.0.0 (Credits and thanks to @GeeckoDev for this excellent work)
- OC OLED panel refresh rate to 60 (from V1.9.1)
- Remake GPU to 4 steps (V_1.9.0) (Very capable for gaming why maintain good battery life)
- Compile using Linaro toolchain 4.7.4.(12.2013) (V1.9.0) (it feels silky smooth)
- Update recovery to PhilZ Touch 5! You have a more beautiful and intuitive GUI. (from V1.8.2)
- Use LZMA compression (from V1.8.2).
- BLN support (only for V1.7.3)
- Enable OC CPU to 1600 (from V1.6.4 for OC CPU versions)
- Exfat native support (Now you can enjoy unlimited file size and fast speed on ext-sdcard)
- Kernel linux version 3.0.31, build using Ubuntu 13.10
- Toolchains: CodeSourcery G++
- Some optimization of the config file
- Su binary is updated to the latest version.
- Made three versions: 1) With OC of both CPU and GPU 2) With stock CPU and OC GPU and 3) With stock CPU and GPU.
Features benefited from C.O.H kernel:
- CPU Hotplug support from Speedmod kernel (only 1 core when not in load, battery friendly)
- Disabled logcat and dmesg and unnecessary Samsung debugging.
- UV capability.
- Increased Touchscreen sensitivity even when charging (Best touch response to date in Note).
- FSYNC Control 1 (from Ezekeel's GLaDOS kernel for Nexus).
- Tweak GPU in GPU OC version: 133, 267, 400 MHz (3 steps),
- Many cpu governors and schedullers: Defaults are Hyper-Row now (You can also tried noop-pegasusq as recommended by C.O.H)
- Fix for wifi drain on standby (disabled all multicast).
- Speedmod K5-3 fixes included
- Other features are the same as in c.o.h’s HelloWorld Kernel.
-------------------------------
HOW TO ENABLE LOGCAT (Only for V1.6.4 and lower!) .Credits to @hardcore:
If you want to re-enable logcat for whatever reason, do this:
adb shell
su
mount -o remount,rw /system
echo ANDROIDLOGGER >> /system/etc/tweaks.conf
mount -o remount,ro /system
exit
Reboot android system. Then can take logcat as you wish!
--------------------------------
The kernel is very smooth, stable and battery friendly.
CHANGELOGS:
HelloWorld-Make-II-V201-P:.
- OC-CPU
- Stock GPU
- Compile using uber toolchain 4.7
Excellent speed and good battery life. This is my current most favorite one.
HelloWorld-Make-II-V2.0.1:.
- Stock GPU and CPU.
- Compile using uber toolchain 4.7
Excellent speed and good battery life. This is one of my favorites.
- Change logs of other versions: see links in download section!
HelloWorld-Make-II-V1.9.0:.
- Remake GPU steps
+ Forest_HelloWorld-Make-II_V1.9.0_AM1 which is more agressive with GPU steps: 133-267-333-400
+ Forest_HelloWorld-Make-II_V1.9.0_GL2 which is more gracious, gentle with GPU steps: 133-200-267-333
- Disable UV interface.
HelloWorld-Make-II-V1.8.2:.
- Update Philz recovery to PhilZ Touch 5.
- Putting back logger module with option to enable it (for those who want to get logcat)
- Use LZMA compression
- Set default Governor to Pegasusq
- Update su and SuperUser to V1.94
- BLN dropped!
Bugs:
- The OC-CPU version has stock video bug the same as V1.6.4. Use MX video play instead!
- Recovery only accept to format internal and external sdcard using default format.
HelloWorld-Make-II-V1.7.3:.
- BLN support added.
HelloWorld-Make-II-V1.6.4:.
- OC CPU to 1600 (you can enable it using Nofrills or SetCPU...)
- UV 25mv for each steps, for balance performance and battery life.
- Include VR I/O scheduler, leave out Deadline
- Tweak thermal threshold (first level from 64 to 70, second level threshold keep the same).
Significant improvement for heavy games: I can play my favorite Let's Golf 3 super smooth now.
Bugs: stock video only play from gallery. Use MX video which is much better, btw.
HelloWorld-Make-II-V1.5.5:.
- Leave out some Governors, keep only 5: Hyper, Performance, Ondemand, Pegasusq, and SmartassV2.
- Leave out I/O Schedulers, keep only 5: Row, Sio, Noop, Cfq and Deadline.
- Padding zImage to the full size of the Kernel partition, 838808 bytes (Thanks to the trick by Chenglu and PhilZ!) this should help make the flash of kernel always clean.
- other minor tweaks
The new version is leaner, lighter. Should help improve performance and battery life!
For those who is on V1.4.5 it is recommended that you move to V1.5.5
HelloWorld-Make-II-V1.4.5: Starting version
DOWNLOADS:
Forest-HelloWorld-V201-P.zip_with Trim, stock Gpu and OC-CPU (1600 Mhz) My favorite
V2.0.1_with Trim, stock Gpu-Cpu:
V2.0.0_Extreme_with Trim and FPBug fix: Announcement and downloads: http://forum.xda-developers.com/showpost.php?p=58408389&postcount=706
V2.0.0_Extreme_Spen: This is a version without OC OLED panel (sung original 57Hz) for S-pen users.
http://forum.xda-developers.com/showpost.php?p=57752642&postcount=691
V2.0.0_Extreme and V1.9.1_Extreme announcement and downloads link:
http://forum.xda-developers.com/showpost.php?p=57652736&postcount=670
V2.0.0_Ultimate: announcement and download link:
http://forum.xda-developers.com/showpost.php?p=57467024&postcount=627
V2.0.0 annoucement and downloads links here
V1.9.1 announcement and download here
V1.9.0 from this post: HelloWorld-Make-II-V1.9.0:
HelloWorld-Make-II-V1.8.2:
1. OC both CPU-GPU:
http://www.mediafire.com/download/njhvzewi2ncl5q5/Forest-HelloWorld-Make-II-V1.8.2.zip
2. OC GPU only:
http://www.mediafire.com/download/po1iefn2dbaajtu/Forest-HelloWorld-Make-II-V1.8.2-OC-GPU(2).zip
3. Stock CPU-GPU:
http://www.mediafire.com/download/lfzab4oc8tb5bit/Forest-HelloWorld-Make-II-V1.8.2-stock-GPU-CPU.zip
HelloWorld-Make-II-V1.7.3::
Download link and instructions go to this post:
http://forum.xda-developers.com/showpost.php?p=51235523&postcount=265
HelloWorld-Make-II-V1.6.4:
http://www.mediafire.com/download/1sum6rn4sw81qdp/Forest-HelloWorld-Make-II-V1.6.4.zip
------------------------------
HelloWorld-Make-II-V1.5.5:
1. With Stock GPU:
http://www.mediafire.com/download/fhl2f2et527vydf/Forest-HelloWorld-Make-II-V1.5.5-StockGPU.zip
2. With OC-GPU:
http://www.mediafire.com/download/b3hu47yyzltey1p/Forest-HelloWorld-Make-II-V1.5.5-OC-GPU.zip
------------------------------
HelloWorld-Make-II-V1.4.5 (pulled in favour of the better version just out)
1. With Stock GPU:
2. With OC-GPU:
INSTALLATION:
1. Flash the attached kernel CWM flashable zip using any SAFE custom recovery like PhilZ kernels.
2. Wipe cache and dalvik cache and reboot.
3. Enjoy. (it takes around 2-3 reboots to the ROM and KERNEL to settle down and get really fast and smooth.
CREDITS AND THANKS:
1. @crime_of_heart : (huge) for too many things
2. @Philz3759: for his wonderful touch recovery
3. @Chenglu for his guide on Initramfs
4. @GeeckoDev for taming r3p1 driver for JB 4.1.2
5. @dorimanx: for his sharing of exfat source code
6. @Dharam_Maniar: for his excellent Tutorial on kernel
7. @hardcore: for the inspiration from his excellent work
8. @maxfu for his great work on OC kernel
9. @Chainfire for his excellent su and superuser.apk
10. Samsung, for the source code for me to play with
11. And many other excellent members in XDA!
For Developers/Modders: You can use the Forest-HelloWorld-Make-II kernel in your CUSTOM ROMs as long as you give links to this thread.
Please THANKS me and C.O.H if you think this kernel is helpful for you!
Source:
Kernel is built from Samsung JB source can be downloaded from Sam Sung open source at: http://opensource.samsung.com/ (EUR: GT-N7000_JB_Opensource.zip)
Modification is made using the patch from COH: can be found in his thread: http://forum.xda-developers.com/showthread.php?t=2252977
Exfat source code: https://github.com/dorimanx/exfat-nofuse
Reserved
Good stuff @forest1971
Thanks
nokiamodeln91 said:
Good stuff @forest1971
Thanks
Click to expand...
Click to collapse
Thanks NokiaModeln91!
It is harder than I thought building a custom kernel from source, and unpacking Initramfs from zImage. I am very happy I made it.
Try it our! I find it really good indeed!
Anyone flash this kernel im on sweetrom 10.5 with speedmod k5
---------- Post added at 01:07 PM ---------- Previous post was at 01:06 PM ----------
forest1971 said:
Thanks NokiaModeln91!
It is harder than I thought building a custom kernel from source, and unpacking Initramfs from zImage. I am very happy I made it.
Try it our! I find it really good indeed!
Click to expand...
Click to collapse
U post same link two time no oc kernel there only stock gpu chek before posting thx
SAINI99 said:
Anyone flash this kernel im on sweetrom 10.5 with speedmod k5
Click to expand...
Click to collapse
I am using sweet rom 10.5 myself. Have tested out for last few days. So smooth!
Sent from my GT-N7000 using Tapatalk 2
Great work I can't try it atm. as I am on a stable OmniROM which I have had for a month but once this breaks I will give it a go
Are there any plans to add more tweaks?
XxPixX said:
Great work I can't try it atm. as I am on a stable OmniROM which I have had for a month but once this breaks I will give it a go
Are there any plans to add more tweaks?
Click to expand...
Click to collapse
The features are extensive so I do not know if there will be further. Lets see.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
The features are extensive so I do not know if there will be further. Lets see.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Provide the oc one links are same chek the main thread mr forest
SAINI99 said:
Provide the oc one links are same chek the main thread mr forest
Click to expand...
Click to collapse
My bad . Thanks for pointing that out. Links are corrected now.
forest1971, quick question. How can i edit mount points ? Example, /system is mounted in /dev/whatevah and i want to change that. Is it possible ?
You can find mount points in the guide in my signature.
Btw, the question is not relevant in this thread.
Sent from my GT-N7000 using Tapatalk 2
Thanks for your work. I see big developers in credit section already. I'm definitely going to give it a shot.
Sent from my SM-N9005
Great work i flashed last night stock gpu one running smooth now lets see how much screen on time on this kernel i will get
With speedmod k5-5 i m getin 5 hours with wifi on
---------- Post added at 04:30 AM ---------- Previous post was at 04:01 AM ----------
I m getin 30 min screen on time for 15 percent battery level cost
This mean maximum i can get 4 hours screen on time
Please make speed mod k5-5 make 2
With updated recovery and with cpu governers and leave all same as it is
This will be a perfect kernel for those people who wna spend life little bit more with note without charge
SAINI99 said:
Great work i flashed last night stock gpu one running smooth now lets see how much screen on time on this kernel i will get
With speedmod k5-5 i m getin 5 hours with wifi on
---------- Post added at 04:30 AM ---------- Previous post was at 04:01 AM ----------
I m getin 30 min screen on time for 15 percent battery level cost
This mean maximum i can get 4 hours screen on time
Please make speed mod k5-5 make 2
With updated recovery and with cpu governers and leave all same as it is
This will be a perfect kernel for those people who wna spend life little bit more with note without charge
Click to expand...
Click to collapse
Speedmod k5-5 seems to be the benchmark for performance and battery life. I suspect too many governers and schedullers may harm the battery life. I will make a new ones with only few of them.
Still, kernel takes time to settle down with rom. So it is still too early to judge. Cheers.
Sent from my GT-N7000 using Tapatalk 2
this kernel support crt animation and boot animation? thanks
via MyOwnName™ device
Boot animation, yes. CTR animation, not tried yes. You may want to try in your rom and lets know. Tks.
Sent from my GT-N7000 using Tapatalk 2
Hey after a half day this kernel love my phone gitin full 5 hours of screen on time big thx man
Sheduler sio changed
Uv all cpu steps and gpu by -100
Cpu governer pagasq
SAINI99 said:
Hey after a half day this kernel love my phone gitin full 5 hours of screen on time big thx man
Sheduler sio changed
Uv all cpu steps and gpu by -100
Cpu governer pagasq
Click to expand...
Click to collapse
Good to know you like it and thanks for sharing UV settings! It should get even better with my next version.
Sent from my GT-N7000 using Tapatalk 2
Battery Test Complete
Here are my speed optimized kernels for samsung touchwiz jellybean, cm11 and aokp kitkat based roms
(many thx to Hank87 http://forum.xda-developers.com/member.php?u=4595544 for testing the many samsung touchwiz test kernels)
V1.2.1:
auto root (tw kernel)
cwm added (tw kernel)
fixed an bug that could make connecting to network very slow
rwsem: steal writing sem for better performance
ondemand: enabled counting iowait as busy for exynos too
kernel fixes for linaro gcc
kernel with AIO enabled
AIO: Don't plug the I/O queue in do_io_submit()
ROW as default io scheduler
build with linaro gcc 4.9.2
kernel build with -Ofast
faux123`s dyn fsync
optimized arm rwsem algorithmfixed an bug that could make the oc kernel unstable
overclock version with 1600mhz max with 16 step frequency table and reduced core voltage
overclock version with 1500mhz max with 15 step frequency table and optimized core voltage
standard version with 1400mhz max with 14 step frequency table and optimized core voltage
on idle cpu can go to 100mhz instead of 200mhz for longer battery life
higher (but save) thermal throttling values
optimized vm values
multithread dexopt enabled
Download:
For Samsung touchwiz jellybean based Roms (CWM zip + Odin tar):
non oc:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607166
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607164
oc1500mhz:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607168
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607169
oc1600mhz:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607172
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607171
For CM11 + AOKP kitkat based Roms (CWM zip):
non oc:
https://www.androidfilehost.com/?fid=95784891001608505
oc1500:
https://www.androidfilehost.com/?fid=95784891001608510
oc1600:
https://www.androidfilehost.com/?fid=95784891001608518
Sources:
https://github.com/bauner
testing TWoc1600 version right now. Antutu score is 20250. GPU has only two steps??? Will write more later, but thanks a lot for Your work on TW system
Have you read also the changes in GeeckoDev thread for changing gralloc panel freq 57 - 64 Hz? Link: http://forum.xda-developers.com/showthread.php?p=56635030
User_99 said:
Have you read also the changes in GeeckoDev thread for changing gralloc panel freq 57 - 64 Hz? Link: http://forum.xda-developers.com/showthread.php?p=56635030
Click to expand...
Click to collapse
thx for your post.
I will try it and if its working without any problems it comes in the next version
Sounds interresting what GeeckoDev found out. Looks like the new freque. also goot for non playing Note 1 users...
57hz - 59hz is completely safe. If you go beyond that, bootanimation will start to derp (turn off/on the screen once it's fully booted and you're good to go). Also you will have no access to the recovery. I only experienced that on AOSP, though. On Touchwiz I could go to 62hz without a problem. 64hz is fine with the workaround above.
It improves smoothness and lowers latency by quite a good margin (~17ms at 57hz, ~16ms at 60hz, ~15ms at 64hz).
Also, good luck with your kernel!
Had to go back to forest 1.90. On Your kernel cannot use gallery
Sent from my GT-N7000 using XDA Free mobile app
Hi thanx for the kernel... I am using oc1600 cm11 on dirty unicorns 8.2... Its working fine..
Sent from my GT-N7000
Hello Bauner
First of all thank u very much for a great kernel. I have tested the non OC and OC 1.5. Everything runs smoothly except for stock video player that got busted with the OC'ed vers just like forest's. I have yet to test battery as I have just completed one battery cycle. Will update if there's anything pops.
Sent from my GT-N7000 using XDA Free mobile app
I also test it for 2 days on DU Rom and it is working smooth. I'm using the non OC version but it seems the kernel loves to stick on 1.1 and 1.4 speed which is why the battery drains much faster.
I also noticed that when Wifi is on and while screen off, it seems to drain also much faster, while on stock it consumes about 150-170mah on this kernel it consumes 230-250mah.
What I'm happy about this kernel though is that it seems to resolve my issue with Dynamic Colors on DU as I had no single reboots while using it. On stock kernel I had reboots when using Dynamic Colors.
Is there a way that instead of always using 1100 speed, it will use a lower frequency like 800 or 900?
Many thanks for the kernel!
Thanks bauner for the great kernel.my note now more energized and smooth after flash with oc1.5ghz tw....antutuscore got 17k..also problem on whatsapp memory leak seems resolved now :beer:
bratboo said:
I also test it for 2 days on DU Rom and it is working smooth. I'm using the non OC version but it seems the kernel loves to stick on 1.1 and 1.4 speed which is why the battery drains much faster.
I also noticed that when Wifi is on and while screen off, it seems to drain also much faster, while on stock it consumes about 150-170mah on this kernel it consumes 230-250mah.
What I'm happy about this kernel though is that it seems to resolve my issue with Dynamic Colors on DU as I had no single reboots while using it. On stock kernel I had reboots when using Dynamic Colors.
Is there a way that instead of always using 1100 speed, it will use a lower frequency like 800 or 900?
Many thanks for the kernel!
Click to expand...
Click to collapse
did you try to close all running apps and then check again?
if tehere are running apps that makes i/o can make this kernel running on higer frequencies because my modifications on ondemand.
you could try to use an tool like no-frills cpu control and try another cpu governor like pegasusq or conservative.
with this tool you also can see how long your cpu was running on every frequency
bauner said:
did you try to close all running apps and then check again?
if tehere are running apps that makes i/o can make this kernel running on higer frequencies because my modifications on ondemand.
you could try to use an tool like no-frills cpu control and try another cpu governor like pegasusq or conservative.
with this tool you also can see how long your cpu was running on every frequency
Click to expand...
Click to collapse
Thanks! Will test maybe tom and change my governor to pegasusq. Hopefully when on normal use it will use a lower frequency instead of 1100. I'm using BetterBatteryStats to see how long each frequency runs and the majority is 1400, 1100 and 100.
About the higher consume of battery, yes there is one app that was running and it was FB messenger though it was also running when I compared it to the stock kernel from DU.
I'll give feedback again once I'm done with testing.
with my rom+kernel it doesn't stay at high frequencies.
the attached screenshot was made a few minutes after boot complete
It says it couldn't mount storage/sdcard0 when trying to mount in recovery.
(KitKat version)
Hi bauner,
Mine also stay highest 1.1ghz..why never reach 1.5ghz..I'm ondemand/row..
Sent from my GT-N7000 using XDA Free mobile app
Hi guys..please help me.my phone got triangle after flash this kernel via odin.how to remove this triangle without using jig?
Sent from my GT-N7000 using XDA Free mobile app
slipkory said:
Hi guys..please help me.my phone got triangle after flash this kernel via odin.how to remove this triangle without using jig?
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Use this
Thanks lakame. Is it safe to use this triangleaway..this triangle due to flash via odin right..
bauner any steps to get rid this via flash?
Sent from my GT-N7000 using XDA Free mobile app
It's an app. Nothing to do only follow the guides in the app. Sometimes you need the correct kernel for resetting... try it out.