Database Develop

[KERNEL][AOSP][2.6.32.26] - Savage-Kernel-Inc v1 ! [HAVS+CFS+SBC!!] UPDATED 1/06!

I am proud to announce Savage-Kernel to the xda forms. Currently in beta testing we worked from the latest invisiblek kernel newly undervolted, HAVS with the SBC mod.
JUST FOR @PonsAsinorem:::::: DISCLAIMER!!!! IM NOT RESPONSIBLE FOR BRICKING YOUR PHONE... EVEN THOUGH THE KERNEL CANNOT BRICK A ROOTED PHONE UNLESS YOU FLASH A BAD RECOVERY..... DON'T MODIFY THE UPDATER-SCRIPT TO FLASH THIS TO YOUR RECOVERY!!!!!! .... ALL CHANGES TO THIS KERNEL STILL MEET THE MINIMUM SPECS OF THE INC.... UNLESS YOU OVERCLOCK... WHICH IS UNDERVOLTED... WHICH IS RUNNING AT THE STOCK VOLTAGE AND SHOULDN'T HARM YOUR PHONE ANYWAY.
SENSE BASED ROMS NOT SUPPORTED THIS IS FOR AOSP ROM'S ONLY
So far the Kernel works great in conservative governor. which all the devs prefer.
Devs:
jsseidel1 (co-creator)
luisrcastillo (co-creator)
ms79723 (SBC mod updates)
lithid-cm (contributer. Updater-script guru)
Credits:
invisiblek--> base kernel!!
ms79723 --> the SBC mod.
netarchy --> smartass gov
intersectRaven --> HAVS
(credits are given to the dev's where we got some code from, may no be original designer)
CFS Builds:
Alpha1 : Click Here to download
Stable v1 : Click Here to download
BFS Builds:
Follow the github on twitter @evokernelsrc
If you like our kernel and want to support us... donate (no obligation)

Change log
Code:
[B]Alpha 1[/B]
Undervolted to 925
HAVS implemented configured for conservative
smartass added for fans
SBC Mod added (trickle Charging)
Enabled OC to 1.19 and stable
conservative governor tweaks
HAVS tweaks
smartass governor tweaks
voltage tweaks
BFS360 (latest version) and CFS VERSION!!!
Added SBC v7
BFS tweaks to ondemand gov
tweaks to interactive gov
bad ass CFS tweaks!!!!!
aggressive swap drop
misc tweaks
[B]Stable v1[/B]
SBC v7 ported from Evo (better battery life, this is a HTC mod so doesnt matter that it came from Evo)

FAQ's
All answers are based off latest stable build
Which governor should I use?
Use Conservative for best battery, if you get any lag or choppy or shutter switch to either Smartass or interactive.
Which governors are tweaked?
Conservative and Smartass
I'm running smartass and having screenwake issuesm what do I do?
We suggest you set up a screen off profile of 245/384 to avoid the wake issue.
Have any more? Just ask!!

jsseidel1 said:
All answers are based off latest stable build
Which governor should I use?
Use Conservative for best battery, if you get any lag or choppy or shutter switch to either Smartass or interactive.
Which governors are tweaked?
Conservative and Smartass
I'm running smartass and having screenwake issuesm what do I do?
We suggest you set up a screen off profile of 245/384 to avoid the wake issue.
Have any more? Just ask!!
Click to expand...
Click to collapse
What kind of battery life are you getting with this? I know results vary, but just curious.
Sent from my ADR6300 using XDA App

excited to try this

jsseidel1 said:
All answers are based off latest stable build
Which governor should I use?
Use Conservative for best battery, if you get any lag or choppy or shutter switch to either Smartass or interactive.
Which governors are tweaked?
Conservative and Smartass
I'm running smartass and having screenwake issuesm what do I do?
We suggest you set up a screen off profile of 245/384 to avoid the wake issue.
Have any more? Just ask!!
Click to expand...
Click to collapse
How did you determine that conservative is the most power-friendly?

I would post a disclaimer about the SBC mod.
Sent from my ADR6300 using Tapatalk

Am I missing the link here or has it not been posted yet? I'm excited to test.

Guys, SBC *really* isn't good for the battery. Li-Ion batteries aren't designed to use trickle charging. IMO this will kill the batteries faster and isn't worth the extra charging.

waiting to try this... dont think it will hurt my battery in the short run... who keeps phones longer than 2 years anways?

True. I've gotten better battery life off of it, but I feel like my MIUI build recently has been getting worse due to the SBC mod.

Works on gingerbread roms?
Sent from my ADR6300 using XDA App

If it's AOSP, it should, but sometimes I've gotten weird reactions using kernels that are claimed to work on all AOSP ROMs (Kingx Kernel + MIUI = no-no. Also, MIUI + Hydra = no-no).
Point being, we should probably get this clarified. I've seen instances where people have lost touchscreen functionality (though usually that's due to a failure to wipe cache/dalvik) among other issues. Until we field test this on GB ROMs or until the OP states that it works on them, we should probably refrain from flashing it over a GB ROM. You can do it if you want, I'm in no way trying to make you turn away from it; I'm just saying take it with a grain of salt.
Plus there's the SBC issue to worry about; trickle-charging has negatively affected the battery performance of my MIUI ROM, so I'm going to switch kernels whenever I go back to it. Better charging in the short run < not needing to buy new batteries in the long run (and therefore saving money).

link??????

*sigh*...
Ok, clearly I need to start citing the comments I make. Here you go:
http://forum.xda-developers.com/showthread.php?t=885476&page=25
The first post on this last page pretty much sums it up (actually, read 23-25 to sum up the main issues, it also has links to OTHER posts talking about the issues), but if you want other chronological examples of touchscreen failure or other issues you can read examples from pages 2, 5, and some places past page 15. SBC is bad news on its own, and adding overclocking to it just makes it worse. Again, you can use the kernel if you want, I'm not gonna stop you, I'm just saying that there have BEEN problems with it on other AOSP ROMs. MIUI seems to take pretty well to SBC in terms of battery, as I've seen; but, it's been getting worse as of late. UltimateDroid had a touchscreen failure (page 5) in v1; I don't believe that's been fixed yet, but feel free to correct me. MIUI had a touchscreen failure in v2 (though I think there might have been a bad flash involved, because I flashed SBC to my MIUI 12.24 at the time and it worked fine), cited page 23. Need I go on? Lol.
Point is (I've said that a lot, I know) that it does damage, multiple AOSP ROMs are getting touchscreen failure, and there's more harm than good that comes out of it.

Read: http://www.ziggy471.com/2011/01/02/overcharging-batteries/

That's a good link also. It's actually in the thread I posted, but its equally as important if not more important than my post. Good job man XD
Sent from my HTC Incredible running Carbonite Red 1.5.

Ok you all need to relax. SBC does not over charge your battery. The trickle charging is essentially the battery staying at 100% while on the charger. Lithium ion batteries have tech built into them to protect from over charging and such. SBC just means when you take it off the charger it will really be at 100%. You can't over charge aanyway. This kernel allows you to overclock but it doesn't force it. You need to choose overclocking yourself in setcpu. ... and 90% of the kernels in this forum have SBC they just either don't say it or they call it the battery fix. You can see it in their gits. On the evo forums we just call it SBC. Ill be posting the kernel today. If you don't want to use it. Then don't. It was just requested that I port my evo kernel over to the Inc. So I am.
Sent from my PC36100 using XDA App

gmichaelow said:
How did you determine that conservative is the most power-friendly?
Click to expand...
Click to collapse
Conservative by nature is more power friendly as it only ramps up the processor as requested then brings it right back down to your min.
The way we have set our Governor is to optimize the Conservative Governor to get the most speed stability and battery life out of your phone.
I just got a config from one of your rom dev's to build the kernel so this should be posted by tomorrow.

I for one appreciate what you are doing. There is nothing wrong with having a variety of kernels to choose from. If you disagree with what this dev is doing, then use another kernel. We don't need to be running them off.
Sent from my ADR6300 using XDA App

[Kernel] RieGo Kernel 0.7 (3.1 only)

Hi guys, finally i want to release my kernel.
This kernel is based on pershoots latest source. So it's mostly his work
-Contains Lazy governor by Ezekeel
-Contains SLQB slab allocator
Changelog:
Code:
[SIZE="1"]coming next:
[/SIZE]
0.7:
-use SLQB slab allocator
[SIZE="1"]0.6:
-no more GPU OC for now (doesn't work)
-additional modules
-a few minor performance tweaks
-more "lazy" tweaking
0.5:
-tweaked "lazy" a bit and set as default
-optional gpu overclocking (experimental)
0.4:
-started from scratch
-added lazy governor
-NO gpu overclocking until i can get it working
-should work with all devices now (please feel free to test :))
0.3:
-ondemand is default
-GT-P7510 with TW should work
0.2:
-removed SmartassV2 - freezed max frequency sometimes
-added Lazy governor by [URL="http://forum.xda-developers.com/showthread.php?t=1276092"]Ezekeel[/URL] and set as default
-20% 3D GPU overclock (experimental, may freeze, but works fine so far)
0.1:
-ARM: tegra: speed up framebuffer copy
-added SmartassV2 governor (set with SetCpu) [B]*testing*[/B]
-13% GPU overclock
0.0:
-100% pershoots Kernel[/SIZE]
Download: (Only 3.1!)
(Flash with CWM)
No GPU OC:
GT-P7500
GT-P7500 Touchwiz
GT-P7510 (WiFi-only)
GT-P7510 (WiFi-only) Touchwiz
Modules Archive

Welcome, we need all the devs and cooks we can get in here. Would you consider supporting the GT-P7500 also? We are starving!

nickwarn said:
Welcome, we need all the devs and cooks we can get in here. Would you consider supporting the GT-P7500 also? We are starving!
Click to expand...
Click to collapse
I'll try my best to support the GT-P7500 in the future

Downloading and trying now. Thank you
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
The 7500 version is messed up. It boots but the rainbow colours that sometime can show themselves at bootup acctually show themselves when its booted. Its impossible to see anything, the whole screen is covered by these coloured lines. But the tab is booted, it responds to screen timeout and when i press power button the screen goes black and it turns on when i press it. so it boots but something is messed up with graphics. Please check and i try the update for you.

nickwarn said:
Downloading and trying now. Thank you
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
The 7500 version is messed up. It boots but the rainbow colours that sometime can show themselves at bootup acctually show themselves when its booted. Its impossible to see anything, the whole screen is covered by these coloured lines. But the tab is booted, it responds to screen timeout and when i press power button the screen goes black and it turns on when i press it. so it boots but something is messed up with graphics. Please check and i try the update for you.
Click to expand...
Click to collapse
Thanks for trying. I'm not sure what the problem is. I'll take the links down.
Reflashing an other (working) kernel should solve the problem for you.
It's weird because the graphics part should be the same for all. I really have no idea where the problem is.
I don't think it's because of overclocking
... enough kernel developing for today.

Sorry for asking, but did you use the right base for 7500 version? Its easy to mix up stuff. maybe it was built on 7510 base or non TW base. anyway good try

nickwarn said:
Sorry for asking, but did you use the right base for 7500 version? Its easy to mix up stuff. maybe it was built on 7510 base or non TW base. anyway good try
Click to expand...
Click to collapse
I think so. I'll look into it later

im gonna sound like an idiot...but whats the difference between this and pershoot's? does pershoot's have any gpu overclock?

K Rich said:
im gonna sound like an idiot...but whats the difference between this and pershoot's? does pershoot's have any gpu overclock?
Click to expand...
Click to collapse
right now the difference is:
-ARM: tegra: speed up framebuffer copy
-added Lazy governor by Ezekeel and set as default
-20% 3D GPU overclock (experimental, may freeze, but works fine so far)
(more to come )
and no, pershoot doesn't have gpu overclock.

sweet, im always up for new mods/tweaks!
ill be giving this a try as soon as i get home from work

Does overclocking the GPU improve video playback?

CazeW said:
Does overclocking the GPU improve video playback?
Click to expand...
Click to collapse
I don't think so. only the 3D rendering part is overclocked. but you may give it a try, maybe I'm wrong

I'll wait till somebody tries the wifi only/touchwiz version

Thanks for giving the gpu overclocking a go so quickly.
Wifi touchwiz does not work... Yet. It gives the same static.
BTW, anyone know a good graphics benchmark for honeycomb? Neocore doesn't work.

non-touchwiz seems to be working so far...gonna keep testing.

Ive been playing Order&Chaos on the tab and would love me some GPU oc.
I'm on TW tho, but tempted to flash non just to try it out. Either way, much appreciated. -

so far so good, everything seems to be running well.

Kernel working well. Flashed over tasks and phantoms stock hc, n my tab is awesome smooth and fast. Best its ever been. Thank you for your work.
Oh and my lag has reduced quite alot, dont know if its just me or something has changed.
Btw im overclocked to 1.4 interactive.
Sent from my GT-P7510 using xda premium

AngeredNumber said:
Kernel working well. Flashed over tasks and phantoms stock hc, n my tab is awesome smooth and fast. Best its ever been. Thank you for your work.
Oh and my lag has reduced quite alot, dont know if its just me or something has changed.
Btw im overclocked to 1.4 interactive.
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
1.4 interactive for me as well, nice and smooth!!
Sent from my GT-P7510 using Tapatalk

I'm on a TW rom now. I'll try to get it working the next days.
AngeredNumber said:
Kernel working well. Flashed over tasks and phantoms stock hc, n my tab is awesome smooth and fast. Best its ever been. Thank you for your work.
Oh and my lag has reduced quite alot, dont know if its just me or something has changed.
Btw im overclocked to 1.4 interactive.
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
Nice! There's still some oc possible. Xoom users have 30% overclock. but that's too dangerous for me right now
You should have seen how fast it is with smartass governor. (I'll try to get that working asap)

[Kernel][CM10][26/08] CMOC10-Kernel [New! MaxOC version]

Hello people,
This is a CM10 overclocked kernel, based on Metallice's CM9 version. Thanks for jumpstarting me, mate! :laugh:
It's features:
Overclockable to 1.38GHz, 1.52GHz for MaxOC
Underclockable to 150MHz, both
GPU overclocked to 384MHz, 512MHz for MaxOC
L3 overclocked to 224MHz for MaxOC
Wheatley governor (by Ezekeel)
Pegasusq governor
NTFS Read-only support
SIO scheduler (by Ezekeel)
SLQB memory allocator (by Ezekeel)
Optimized CRC32 & ARM RWSEM algorithms
LowMemoryKiller backported from 3.4 kernel
and several other fixes and optimizations
Click to expand...
Click to collapse
***Read Me***
DO NOT, UNDER ANY CIRCUMSTANCE, USE SETCPU PROFILES OF ANY KIND OR ANYTHING SIMILAR WITH THIS DEVICE. Things like screen off max frequency, temperature throttling, and others are already built in to the OMAP architecture. Using ANY profiles will ONLY lead to problems, instabilities, and battery drain.
***************
***Changelog***
26-08:
Included cifs module in zip. Re-enabled touchboost for smoother response. NTFS support (read-only)
NEW! MaxOC version. CPU @ 1.52, GPU @ 512, L3 @ 224 & significant overvolt @ max speed.
***************
Download links:
Regular version: http://goo.im/devs/Johnsel/kernels/CMOC10-Kernel_P31xx-20120826.zip
Use at own risk!! These values are HIGH!
MaxOC version: http://goo.im/devs/Johnsel/kernels/CMOC10-Kernel_P31xx-20120826-MaxOC.zip
Source:
https://github.com/Johnsel/android_kernel_samsung_espresso10/tree/jellybean

Installing right now. Thank you

Awesome! Thanks man. Will give it a good run.
Edit: won't boot. Gets stuck at the Samsung logo. Will try to post logs.
3113

scottx . said:
Awesome! Thanks man. Will give it a good run.
Edit: won't boot. Gets stuck at the Samsung logo. Will try to post logs.
3113
Click to expand...
Click to collapse
for me too (P3100)
Tried to reinstall, but after some minutes on Samsung logo my P3100 has rebooted, but still on sam logo (

P3110, flashed zip via CWM, same problem here, no-boot: stuck at Samsung logo.
How do we acquire logs to post, by the way?
Thanks though, Johnsel! Nice to see we're on our way to a swish new kernel for CM10

New build uploaded. Hope it works now.

boots but wifi not working on my P3100
Edit: tried also with a full wipe but nothing, Wifi doesn't work

jym1975 said:
boots but wifi not working on my P3100
Click to expand...
Click to collapse
Agreed - boots now (hurrah!) but no Wifi, it will not turn on. P3110 here

And updated again.

Wifi still broken.

Now it should work. Please don't hit me for f'ing up that many times in a row :]

Yeah, WiFi now working
Sent from my GT-P3100 using xda app-developers app

Zoom Zoom on my p3113! Thank you!

Johnsel said:
Now it should work. Please don't hit me for f'ing up that many times in a row :]
Click to expand...
Click to collapse
Glad to see you got it all up and running. Good work! I'm always open to PMs if you have any more questions or whatnot.
Also be careful with live OC. It doesn't just overclock CPU/gpu/bus. It overclocks EVERYTHING. A lot of which don't like being overclocked. I would disable it for things like the DSP or other miscellaneous frequencies if you want it to go higher and be more effective. The source should be pretty straightforward on how to disable it for those elements. At least that's how it was the last time I looked. Maybe its different now.
Sent from my Nexus 7 using xda premium

I confirm, so far it's fine.
Try @1200 and 1380. Thx for the work.
Sent from my GT-P3110 using xda app-developers app

Metallice said:
Glad to see you got it all up and running. Good work! I'm always open to PMs if you have any more questions or whatnot.
Also be careful with live OC. It doesn't just overclock CPU/gpu/bus. It overclocks EVERYTHING. A lot of which don't like being overclocked. I would disable it for things like the DSP or other miscellaneous frequencies if you want it to go higher and be more effective. The source should be pretty straightforward on how to disable it for those elements. At least that's how it was the last time I looked. Maybe its different now.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I'll respond in a PM on your post to not clutter the topic. Aside from that, again thanks for the help, couldn't have done this without it :highfive:

Good work. Now I don't mind using 10 as a DD.
Just need tablet mode @ 145dpi now.

Touch screen , became unresponsive, after sitting there, over 3 hours ,,anyone have had this happen?, (OC setting was at default )
Sent from my GT-P3100 using xda app-developers app

Just tested latest version. Works pretty well.
Today I played with LiveOC:
CoreOC: setting 101 or any number -> instant crash.
GPU: works well.
As Metallice said, it just overclocks everything, so this behavior is expected.
I just want to ask you if you can add 2 features?
1. Pegasusq governor. I'm using it on my I9100 (Siyah kernel for S2) and it's really good in performance/battery.
2. Can you take a look at the sound enhancement (voodoo sound based) found in Siyah kernel for S3. The tab uses the same audio DAC WM1811, so it wouldn't be difficult.
Regards,
RJ

I had voodoo sound on my infuse and it was nice and clean. Would really like it here.

[KERNEL][22/01]· ▀▄ · Kernel 3.0.58 HydRx-v4r97b - For Samsung Stock-JB

HydRx-v4r97b
JB Kernel for Samsung Stock ROMS
Only for stock jelly bean ROMS
EXTREME won't work in all mobiles so, if don't work extreme for you, put Semi.​
The config:
Based on 3.0.57 - Yank.555+neak with patches, configs, optimizations and tweaks (so thanks to Yank and simone)
OC up to 1700mhz.
Reduced low cpu steps to get some performance (Deleted 300mhz, 400mhz, and 600mhz)
Voltages:
EXTREME:
Cpu arm : -112,5mv in all freqs from 200 to 1500mhz (low freqs as 200,500 +12,5mV)
Cpu internal: -50mv in all freqs
Bus: -100mv in all freqs
Gpu: -100mv in all freqs
SEMI:
Cpu arm : -87,5mv in all freqs from 200 to 1500mhz (low freqs as 200,500 +12,5mV)
Cpu internal: -50mv in all freqs
Bus: -75mv in all freqs
Gpu: -75mv in all freqs
MEDIUM:
Cpu arm : -62,5mv in all freqs from 200 to 1500mhz (low freqs as 200,500 +12,5mV)
Cpu internal: -37,5mv in all freqs
Bus: -50mv in all freqs
Gpu: -50mv in all freqs
Tree RCU+NO_HZ
SIO Iosched enabled by default and tweaked.
Governor hydrxq (simply a lulzactiveq governor with tweaks to performance (thanks to tegrak), if you see it drains much with this governor, you can select pegasusq governor with voltage control)
Disabled Tracing, logging, and debugging.
Some compiler CFLAGS optimizations added (linaro toolchain)
Tweaks virtual mem, I/O, kernel & scheduler.
Set wifi power limit to 8dBm.
Max powersave in sleep mode with some modifications and screenstate:
*More stable GPU voltajes set on the fly when you screen off the display (min 775mV).
*Cleaning of cache/inodes when you screen off, and each 6 hours.
*laptop mode enabled with screen off.
*some tweaks more when you screen off I consider they save power.
Priorized some system apps at boot, to get some a performance system..
Auto script to close all possible samsung apps at boot.
Swap compatible, but not used for now.
Stand alone hotplug tweaked to low usage of cores.
Sound eargasm voodoo patch added controlable with STweaks from market. (thanks to gokhanmoral)
Tweaks mdni, for better colors.
More powersave in 2G/3G networks and wifi supplicant time modified.
SDD sudden death fixed.
I forget some things I'll put more.
etc
GPL: https://github.com/NeoPhyTe-x360/i9300-S3-JB-kernel
[*] It's not compatible with 64GB exFAT sdcards (if you like to see your files you have to format your sd64 in FAT) [It's a common issue with updated kernels and proprietary modules]
Some versions go from letter A to letter D.
Letter A; Less UV, internal are more "conflictive" voltages, so letter A is a "light" uv in internals
to
Letter D: More UV, the most UV possible, agressive internal volts and -125mV GPU volts, the maximum possible without freezes in some devices.
Download:
[DOWNLOAD]Kernel_HydRx-kernel-v4r97b-_-i9300-ExtremePowerSave
​

reserved

reserved2

Looks promising will try for sure. Thanks and welcome to s3 community have used your aokp roms on S2

i have used this kernel for 6 hours ! battery is good. Need more times to continue testing.
PS : used the v2.6a, will trying v2.6d now !

I Will try right now.. I'll comment later. Thanks
Sent from my GT-I9300 using xda premium

noob question, but by stock you mean non-sammy based right?

Shudder123 said:
noob question, but by stock you mean non-sammy based right?
Click to expand...
Click to collapse
Stock = Samsung based rom
you can use the kernel in every rom except MIUI,CYANOGEN AND AOKP ( and their mixed/customized roms)

can u make a more relaxed version in terms of uv's...not all phns can hndle even semi extreme version

naveediftikhar said:
can u make a more relaxed version in terms of uv's...not all phns can hndle even semi extreme version
Click to expand...
Click to collapse
Will do mate
EDIT: What phenomenal "version" is working fine for u?

NeoPhyTe.x360 said:
Will do mate
EDIT: What phenomenal "version" is working fine for u?
Click to expand...
Click to collapse
idont use phenomenal...m all yank-o these days!
EDIT: i see that your kenel isnt compatible with cpuspy and i jus tried the semi extreme version..straight away got a freeze..!

Flashed semi version kernel.. Working good so far but cpu spy can't detect the cpu states
Sent from my GT-I9300 using xda premium

jothi2lingam said:
Flashed semi version kernel.. Working good so far but cpu spy can't detect the cpu states
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
it's disabled, but in next release I can enable it if you all like

Really need this function dude so we can aware whether this kernel working in deep sleep or not
Sent from my GT-I9300 using xda premium

updated

naveediftikhar said:
can u make a more relaxed version in terms of uv's...not all phns can hndle even semi extreme version
Click to expand...
Click to collapse
I had the most fluid and lagg- free experience with your kernel, only problem is the phone would freeze every now and than.. I tryed the semi extreme version on Anono Rom v19. I couldent say if the battery life is good, because i had to reflash perseus again for stability, but im very pleased with the smoothness and the general absence of lagg. I'll try the medium version now and report back...

Could you post pictures for stwaeks showing how can i put kernel confgratin
Thanks
Sent from my GT-I9300 using xda premium

jothi2lingam said:
Flashed semi version kernel.. Working good so far but cpu spy can't detect the cpu states
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
What r those fonts..if its flipflop plz link it...or share it...
SENT FROM MY GALAXY SIII

Ext sd card should be fat32?? Or any
Sent from my GT-I9300 using xda app-developers app

gauravbhawsar said:
What r those fonts..if its flipflop plz link it...or share it...
SENT FROM MY GALAXY SIII
Click to expand...
Click to collapse
It's ultima mod font... Find in this files
http://db.tt/9flYnA1R
http://db.tt/6glbxGZP
Sent from my GT-I9300 using xda premium

[KERNEL][4.4.2][WIP][SGP311/312]UnleaZhed XTZ Kernel v0.2

Hello! This is my first kernel, The UnleaZhed XTZ Kernel. I'm a noob in developing a kernel, so some bugs may be found in this kernel and I may not be able to fix them! One more important thing, this kernel uses the sources from some developers and I'm here to present my greatest thanks to everyone of them!
FLASH AT YOUR OWN RISK!!​
UnleaZhed XTZ Kernel
Requirements:
4.4.2 Xperia Tablet Z Wi-Fi version (SGP311/312)
Unlocked bootloader
Fastboot driver installed computer
Features:
CPU overclock up to 1836MHz
CPU UV by 100 default
CPU UV control
GPU overclock up to 450MHz (due to some bandwidth problem)
Use auto CPU hotplug instead of MP-Decision
Some minor things
!!recovery has resolution problem ATM!!
Click to expand...
Click to collapse
Installation:
1. Make your Tablet Z in fastboot mode
2. On your computer, open cmd and navigate to the location of kernel
3. Type "fastboot flash boot Kernel_name.img
4. Type "fastboot reboot"
5. Enjoy!
Downloads:
UnleaZhed XTZ v0.1
UnleaZhed XTZ v0.1.1
UnleaZhed XTZ v0.2
Credit:
DoomLoRD
thalamus
Sony
Faux123
Source:
My Github

Nice try but do you have any plans for an aosp kernel?i like overclock and the extra features but it is too tough to say goodbye to pac rom

pangiotis24 said:
Nice try but do you have any plans for an aosp kernel?i like overclock and the extra features but it is too tough to say goodbye to pac rom
Click to expand...
Click to collapse
Will do but it may be done in the next month, Thanks for your suggestion.

First of all THANK YOU for spending your time on this and sharing your result with us!
Just flashed the kernel! Good news...nothing is bricked
CPU Spy Plus indeed shows 1836 Mhz used! I did´t do anything for that.
You might re-think this. Using 1512Mhz instead by default and let the users choose that high speed CPU mode themselves as it may not be stable on all devices.
That 324Mhz added is a huge step...there is no step in between possible?
What about voltages. Did you modify anything? Is the voltage raised to achieve the high cpu frequency? Please post some more information about what happens here...
In fact I´m just running Antutu to see general stability on my device.
VERY BAD score. Before your kenel there were 20300 points. Now with OC only 19746.
=====================================================================
EDIT: Just recognized.... several questions are being answered by Antutu CPU Master.
1512 IS USED by default!
1620Mhz and 1728 Mhz are there to choose and of course finally the 1836Mhz.
Scaling is interactive by default (changed to my fav ondemand)
I/O Scheduler is cfq by default (changed to my fav noop)
Antutu Score @ 1836Mhz: 16077Mhz ???
Lower than without OC? Needs retesting (14230 point when setting max to 1836Mhz and Min to 1512Mhz(!!!???)...maybe the benchmark is wrong...Will give it some time to see if I myself feel a speedup.
After Restart Antutu Score ends up @ 19761 points...not bad. but clearyl not enough looking at the massice OC done. REBOOT! Tab just rebooted! So 1836Mhz is not stable at mine! Trying 1728Mhz now instead.
18139 points....this kernel lacks some serious power if we can believe the scores of antutu. This is a V0.1 so nothing to worry too soon. You´ll make it find it´s power
Switched back to kernel from pulser_g2 (http://forum.xda-developers.com/showthread.php?t=2444452) and 19908 points without any OC! You may look into it.
But please answer the other questiones I wasn´t able to clear myself.
Greetings
Rodger

DJ-Tumor said:
First of all THANK YOU for spending your time on this and sharing your result with us!
Just flashed the kernel! Good news...nothing is bricked
CPU Spy Plus indeed shows 1836 Mhz used! I did´t do anything for that.
You might re-think this. Using 1512Mhz instead by default and let the users choose that high speed CPU mode themselves as it may not be stable on all devices.
That 324Mhz added is a huge step...there is no step in between possible?
What about voltages. Did you modify anything? Is the voltage raised to achieve the high cpu frequency? Please post some more information about what happens here...
In fact I´m just running Antutu to see general stability on my device.
VERY BAD score. Before your kenel there were 20300 points. Now with OC only 19746.
=====================================================================
EDIT: Just recognized.... several questions are being answered by Antutu CPU Master.
1512 IS USED by default!
1620Mhz and 1728 Mhz are there to choose and of course finally the 1836Mhz.
Scaling is interactive by default (changed to my fav ondemand)
I/O Scheduler is cfq by default (changed to my fav noop)
Antutu Score @ 1836Mhz: 16077Mhz ???
Lower than without OC? Needs retesting (14230 point when setting max to 1836Mhz and Min to 1512Mhz(!!!???)...maybe the benchmark is wrong...Will give it some time to see if I myself feel a speedup.
After Restart Antutu Score ends up @ 19761 points...not bad. but clearyl not enough looking at the massice OC done. REBOOT! Tab just rebooted! So 1836Mhz is not stable at mine! Trying 1728Mhz now instead.
18139 points....this kernel lacks some serious power if we can believe the scores of antutu. This is a V0.1 so nothing to worry too soon. You´ll make it find it´s power
Switched back to kernel from pulser_g2 (http://forum.xda-developers.com/showthread.php?t=2444452) and 19908 points without any OC! You may look into it.
But please answer the other questiones I wasn´t able to clear myself.
Greetings
Rodger
Click to expand...
Click to collapse
Sorry for my late,
I've tested Antutu with 1512MHz and 1836MHz. For my Tablet Z, I got ~20000 (1512MHz) and ~23000 (1836MHz).
My Tablet Z has fast binning CPU. Can you please tell me which binning your CPU is? Thank you!

hard to tell...did taht thing in Terminal emulator....it tells me "1".
Not fast or slow or anything...

DJ-Tumor said:
First of all THANK YOU for spending your time on this and sharing your result with us!
Just flashed the kernel! Good news...nothing is bricked
CPU Spy Plus indeed shows 1836 Mhz used! I did´t do anything for that.
You might re-think this. Using 1512Mhz instead by default and let the users choose that high speed CPU mode themselves as it may not be stable on all devices.
That 324Mhz added is a huge step...there is no step in between possible?
What about voltages. Did you modify anything? Is the voltage raised to achieve the high cpu frequency? Please post some more information about what happens here...
In fact I´m just running Antutu to see general stability on my device.
VERY BAD score. Before your kenel there were 20300 points. Now with OC only 19746.
=====================================================================
EDIT: Just recognized.... several questions are being answered by Antutu CPU Master.
1512 IS USED by default!
1620Mhz and 1728 Mhz are there to choose and of course finally the 1836Mhz.
Scaling is interactive by default (changed to my fav ondemand)
I/O Scheduler is cfq by default (changed to my fav noop)
Antutu Score @ 1836Mhz: 16077Mhz ???
Lower than without OC? Needs retesting (14230 point when setting max to 1836Mhz and Min to 1512Mhz(!!!???)...maybe the benchmark is wrong...Will give it some time to see if I myself feel a speedup.
After Restart Antutu Score ends up @ 19761 points...not bad. but clearyl not enough looking at the massice OC done. REBOOT! Tab just rebooted! So 1836Mhz is not stable at mine! Trying 1728Mhz now instead.
18139 points....this kernel lacks some serious power if we can believe the scores of antutu. This is a V0.1 so nothing to worry too soon. You´ll make it find it´s power
Switched back to kernel from pulser_g2 (http://forum.xda-developers.com/showthread.php?t=2444452) and 19908 points without any OC! You may look into it.
But please answer the other questiones I wasn´t able to clear myself.
Greetings
Rodger
Click to expand...
Click to collapse
How is the battery life?
Sent from my SGP311 using XDA Premium 4 mobile app

Destroyedbeauty said:
How is the battery life?
Sent from my SGP311 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Don´t know....after the disastrous performance of the first release I of course switched back to stock.
Now there is the new version which does not cut performance in stock mode.
I´ll OC now to 1728 Mhz and see how it performs with that....battery life is not really good with stock so if you are already asking...FORGET ABOUT alternative kernels not optimized for battery.
That is why I don´t use CM oder AOKP on my Note1. I just eats the battery for breakfast....
OK OC just seemed to scale...20300 points (ca. 19300 at stock speed)...trying 1836 Mhz now.
17389 points....clear drawback....possibly because my device seems to have a bad CPU from what I´ve learned....wanted to use the 17xx Mhz anyway....oops....device just rebooted....my device just isn´t capable of the max cpu setting. :crying:
Anyway the working 1728 Mhz working is great news!
Will give it further testing...

I have two APQ8064 devices, Nexus 4 and Tablet Z. Nexus 4 is 0 (slow), it will reboot sometimes even on [email protected], the Antutu would force close and red light of death would happen if you ignore it and attempt to run again. While my Tablet Z is 2 (fast), this can run at [email protected] and got 23XXX in Antutu.
I don't have an idea which frequency can the 1 (nominal) APQ8064 clock at, but I think [email protected] will be OK. Also, keep eyes on the CPU float-point section in Antutu. At 1512Mhz, it is around 2000. At 1836MHz, it is around 2200. If this drop lower, just pull up the voltage BUT NOT TOO MUCH!!!
Sent from my SGP312 using xda app-developers app

Raising voltage is not an option to me. But anyway...which app do you use for that on tablet Z?
What App do you use for cou control?
I use No-frills. Do you change "interactive" and or "cfq"?
Numbers right after reboot and stopping some unused apps...just stock apps running...
2729 / 930 / 1112 / 1050 / 511 / 927 / 1436 / 5278 / 696 / 600
>>> 15269 points @ stock !!!
switching back to stock....

DJ-Tumor said:
Raising voltage is not an option to me. But anyway...which app do you use for that on tablet Z?
What App do you use for cou control?
I use No-frills. Do you change "interactive" and or "cfq"?
Click to expand...
Click to collapse
I would like to know this as well. Also, how do you check to see which processor you have? (0,1,2; slow, nominal, fast)
Sent from my Xperia Tablet Z

Spartoi said:
I would like to know this as well. Also, how do check to see which processor you have? (0,1,2; slow, nominal, fast)
Sent from my Xperia Tablet Z
Click to expand...
Click to collapse
What is the terminal command to find out? I also considered custom retelling to add some processing oomph. On a per app basis, but reading this... Stock SGP311 on 4.2.2 is chugging fine just north of 20000 points on Antutu. Can we compare Versions? Mine is 3.3.1. I faintly recall reading they mixed up some benchmarking internals because some corporations found loopholes to cheat / inflate scores on new to market devices, maybe that's the discrepancy there?
Another wild thought, could there maybe be, aside from different CPU Models, different kinds of cache / memory scattered through the devices? Would not be the first time a sub par. Cache/Memory bottleneck severely strangled a nominally and factually quicker CPU into much lower overall results. Much depends on weighting within Antutu

Man, what happened with your kernel? We need some stock kernels for 4.3
Sent from my SGP312 using XDA Premium 4 mobile app